Legacy Catalogue - 210205
Legacy Catalogue - 210205
.out
and outdoor areas. It is also ideal for households with elderly
and children making it a new realm in the tile revolution
where only one surface can meet diverse needs.
SLIP-STOP SURFACE,
THE ONE SURFACE THAT
Slip-Stop features
MEETS DIVERSE NEEDS
Excellent anti-slip effect when wet, Anti-Slip with Say goodbye to slips at home with revolutionary
resistance to accidents on slippery floors high durability surface
slip-stop tiles. Smooth surface that produces
anti-slip effect when in contact with water.
One tile – multiple applications.
Easy to clean and maintain, Same series can be used indoors and
stain resistance outdoors creating seamless design
LEGACY
The Astonishing Statement
GL C
SILVER ASH
COLOURS
SILVER ASH . STEEL GREY . BLACK COPPER
GL C
SIZES
STEEL GREY 60x120cm . 60x60cm
SURFACE
GL C Slip-Stop
BLACK COPPER
LEGACY
The Astonishing Statement
.outdoor .indoor
LEGACY
The Astonishing Statement
. INDOOR
FLOOR & WALL
GLC03 BLACK COPPER
60x120cm . Slip-Stop
.dry area
. INDOOR
FLOOR & WALL
GLC01 SILVER ASH
60x120cm . Slip-Stop .wet area
LEGACY
The Astonishing Statement
. OUTDOOR . OUTDOOR
FLOOR WALL
Requires no special maintenance GLC03 BLACK COPPER
60x120cm . Slip-Stop
GLC01 SILVER ASH
60x120cm . Slip-Stop
LEGACY
The Astonishing Statement
LEGACY
The Astonishing Statement
V3 V3
TECHNICAL SPECIFICATIONS
LEGACY
The Astonishing Statement
DESCRIPTION
STANDARD
TEST
MEASUREMENT
UNIT
ISO STANDARD
REQUIREMENT
NIRO GRANITE
Flatness: a) Centre Curvature ISO 10545 -2 mm ±0.5% Max ±0.20% Max / Max 2.0mm
GLC03 BLACK COPPER b) Edge Curvature ISO 10545 -2 mm ±0.5% Max ±0.20% Max / Max 2.0mm
c) Warpage ISO 10545 -2 mm ±0.5% Max ±0.20% Max / Max 2.0mm
Surface Quality ISO 10545 -2 One Major Area ≥ 95% free Comply
of Tiles from visible defect
Abrasion Resistance
a) Deep Abrasion for unglazed tiles ISO 10545 -6 mm3 ≤ 175 mm3 ≤ 160 mm3
V3 b) Surfaces Abrasion for glazed tiles ISO 10545 -7 Visual Check Manuf. to state abrasion class, ≥ PEI 3
cycle and passed ( Dependent on product type )*
Crazing Test (glazed tiles) ISO 10545 -11 Visual Check No Sign of Crazing No Sign of Crazing
Frost Resistance ISO 10545 -12 Visual Check Required No Visible Crack
Stain Resistance
a) For unglazed tiles ISO 10545 -14 Visual Check Manuf. to State ≥ Class 3
b) For glazed tiles ISO 10545 -14 Visual Check ≥ Class 3 ≥ Class 3
The technical specifications is only for rectified tiles. * Refer to test report for specific test result.
Each different tile series are produced to meet different performance requirements. For specific product technical performance, please request
from Niro Granite sales team, their agent or distributor.
Due to the low porosity of porcelain tiles, an Improved High Performance Cementitious adhesive in accordance to BS/EN 12004 & ISO 13007-1
is highly recommended for proper installation. Products that meet this standard are available amongst leading adhesive manufacturers. Please
seek expert advice from adhesive manufacturers for proper selection and application.
RF20200430