Mini-ITX Industrial Mainboard

D2703-S

Hardware
Specification

Revision 1.1
March 2008

Revision History
Revision Date Changes and comments Name
1.0 02/2008 First Edition OEM Sales
1.1 03/2008 MTBF data corrected; details for Feature Connector OEM Sales
added (see chapter 9.2.12)
 Mini-ITX Industrial Mainboard

Table of contents

1 FEATURES............................................. 3 5.2 FREQUENCY AND BANDWIDTH

OVERVIEW ..........................................25
1.1 OVERVIEW ........................................... 3
5.3 COMPLIANT LIST ................................25
1.2 ONBOARD COMPONENTS OVERVIEW ... 4
1.3 SAFETY INSTRUCTIONS ........................ 4 6 CONFIGURATION JUMPER TABLE27
6.1.1 Functions controlled by the
1.4 BLOCK DIAGRAM ................................ 5
configuration jumper..........................27
1.5 FEATURE DETAILS................................ 6 6.1.2 Clear CMOS jumper function
description..........................................27
2 CHIPSET DESCRIPTION.................. 10
6.1.3 LVDS LCD Panel Power ...................27
2.1 HOST INTERFACE (CPU).................... 10
2.2 SYSTEM MEMORY INTERFACE ........... 10 7 SPECIAL FEATURES.........................28
2.3 USER EXPERIENCE FEATURES ............. 10 7.1 GPIO PORT ........................................28
2.3.1 Graphics.............................................10 7.2 WATCHDOG .......................................28
2.3.2 Audio .................................................12
2.3.3 LED Status indicators ........................13 8 MECHANICS .......................................30
2.4 COMMUNICATION FEATURES ............. 14 8.1 FORM FACTOR AND DIMENSIONS .......30
2.4.1 USB Ports ..........................................14 8.1.1 Riser E318 .........................................31
2.4.2 PS/2 Keyboard and Mouse Port .........16 8.1.2 Riser D2704 .......................................31
2.4.3 Serial Port ..........................................16 9 CONNECTOR DEFINITIONS ...........32
2.4.4 Local Area Networking – Gigabit
Ethernet Port ......................................16 9.1 EXTERNAL CONNECTORS ...................33
9.1.1 24V DC Power Plug...........................33
2.5 STORAGE DEVICE FEATURES .............. 16 9.1.2 PS/2 Connectors.................................33
2.5.1 IDE Interface .....................................16 9.1.3 DVI-I Display Connector...................34
2.5.2 Serial ATA (SATA)...........................17 9.1.4 Audio Connectors ..............................34
2.5.3 Firewire..............................................17 9.1.5 USB ...................................................34
2.6 SPI FLASH ......................................... 17 9.1.6 Serial Connector ................................35
2.7 SYSTEM SECURITY FEATURES ............ 17 9.1.7 Firewire Connector ............................35
2.7.1 Trusted Platform Module ...................17 9.1.8 Ethernet Connector ............................35
2.8 SYSTEM MONITORING AND 9.2 INTERNAL CONNECTORS ....................36
MANAGEMENT FEATURES ................... 17
9.2.1 ATX Power Connector ......................36
2.8.1 Basic system monitoring and 9.2.2 Drive Power Connector......................37
management .......................................17 9.2.3 LVDS Backlight Inverter Connector .37
2.8.2 Fan Control ........................................17 9.2.4 LVDS Panel Connector......................38
9.2.5 Audio Connectors ..............................39
3 POWER AND POWER 9.2.6 USB Connectors ................................39
MANAGEMENT FEATURES............ 19 9.2.7 Internal Serial Port .............................40
9.2.8 ATA Interface ....................................40
3.1 GENERAL ACPI ISSUES ...................... 19
9.2.9 Serial ATA Connector .......................40
3.2 POWER SUPPLY REQUIREMENTS ......... 20 9.2.10 Compact Flash Slot ............................41
3.2.1 DC Plug .............................................20 9.2.11 Firewire Connector ............................41
3.2.2 ATX Power Plug................................21 9.2.12 Feature Connector..............................42
3.2.3 Internal 24V DC Plug ........................21 9.2.13 Frontpanel Connector ........................42
3.3 POWER LOADABILITY......................... 22 9.2.14 FAN Connectors ................................42
3.4 POWER DISTRIBUTION ........................ 22 9.2.15 PCI Connector ...................................43
9.2.16 PCI Express Connector ......................44
3.5 CAPACITIVE LOAD ............................. 23 9.2.17 Miscellaneous Connectors .................44
3.6 SYSTEM BATTERY LIFETIME ............... 23
10 ENVIRONMENTAL CONDITIONS .46
4 SYSTEM BUS OVERVIEW ............... 24 10.1 OPERATING ........................................46
4.1 PCI-BUS ............................................ 24 10.2 STORAGE............................................46
4.2 PCI-EXPRESS AND PCI-BUS DEVICE 10.3 MTBF CALCULATION ........................46
INTERRUPTS TABLES .......................... 24
10.4 TEMPERATURE REFERENCE POINTS ...47
5 SYSTEM RESOURCES ...................... 25 10.4.1 Front View D2703-S..........................47
10.4.2 Rear View D2703-S...........................48
5.1 SMBUS ADDRESS TABLE.................... 25
11 GLOSSARY OF TERMS.....................49

March 2008 Revision 1. 2 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

1 Features
1.1 Overview
CPU – AMD s1g1 socket
• CPU-support Storage Devices
• AMD Mobile Sempron • Up to 4 Serial ATA ports
• AMD Mobile Turion • One Parallel ATA port
• AMD S1 socket up to 35W • CF-Card Slot
• Single and Dual Core Support
Basic security features
• Technology: AMD – 64 bit x86 instruction set
• System and BIOS password
extensions
• Hard disk password (incl. “silent password” option)
• Hyper Transport Link: 2000 MT/s (mega transfer
• Recovery BIOS support
per second), max 8 Gbyte/s – or 4 Gbyte/s in each
direction • Boot sequential control for each drive
• Serial port access protection
Main memory • Boot sector virus warning
• DDR2 memory architecture • Flash write protection against virus
• 2 SO-DIMM sockets supporting unbuffered non- • SPD EEPROM write protection against virus
ECC memory modules
• Supports DDR2 400 / 533 / 667 / 800 memory
interface Basic system monitoring and
• 4GB max. memory (8GB possible, but not yet management
tested) • Wake on LAN
• up to 6.4 GB/s dual channel • USB voltage short detection
• Advanced Fan Control
2D/3D Graphics
• Integrated Radeon® X1250-based graphics Advanced system monitoring and
• 24Bit 400MHz RAMDAC management
• Dynamic Video Memory (DVM) • FSC System Management
• Flexible display • FSC Thermal Management
• DVI-I port • Inventory identification
• LVDS port
• Dual independent display
Power Supply Options
• External 24V DC Power Plug
Chips on board • Internal 24V DC Power Plug
• AMD M690E Northbridge • Internal ATX/BTX Power Plug
• AMD SB600 Southbridge
• SMSC SCH5027 Super I/O
Power Management
• Realtek ALC 262 Audio Codec • ACPI (Save to RAM / Disk) support
• Realtek RTL8111C Gigabit LAN • APM support
• LSI FW322 Firewire • Power Supply Monitoring
Environmental protection
Audio • Battery on socket for recycling
• Realtek ALC 262
• RoHS compliant
• Host based Audio with 2-channel HD Audio
• Stereo Head-Phone Out Form factor, compatibility list
• Internal connectors • Formfactor: Mini-ITX
S/PDIF Out, HDA Front panel • Compatible to ACPI, APM, BBS
• External connectors DMI, IAPC, OnNow, PC2001, PCI 2.3, WfM,
Stereo Microphone Input, Stereo Line Input, ASF2.0
Stereo Line Output
Communication
• Internal connector
4xUSB 2.0, COM2, Firewire
• External (I/O shield) connector
4xUSB 2.0, COM1, Firewire
LAN – Ethernet Controller
• 2 * Realtek RTL8111C 10/100/1000 Mbit/s LAN
• Wake-On-LAN by interesting packets, link status
change and Magic-Packet TM
• InCom LAN boot and PXE support

March 2008 Revision 1. 3 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

1.2 Onboard Components Overview

1.3 Safety instructions

• The ATX power connector on the motherboard and the external 24V DC input must never
be used at the same time under any circumstances, as this would cause irreparable damage
to various motherboard components.

• If for any reason the electrical supply is to be changed from internal (ATX) to external
(24V DC) or vice versa (e.g. for laboratory or test installations), make certain that you wait
at least 5 minutes after disconnecting one supply before connecting the other. Otherwise
the residual charge from onboard capacitors may cause irreparable damage to motherboard
components.

• Do not connect or disconnect any cables or modules to or from any onboard connectors
(except the I/O connectors at the rear) until the motherboard is completely powered down.

Any damage caused to the motherboard by misuse of the electrical supply inputs or onboard
connectors is excluded from the standard warranty. Fujitsu Siemens Computers cannot be held liable
for any damage that results from incorrect use of the electrical supply inputs or any onboard
connectors.

The system integrator is fully responsible for the usage of appropriate connectors and cables in order
to fulfill the technical requirements (electrical contact, durability, power/current levels, signal integrity
etc.)

March 2008 Revision 1. 4 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

1.4 Block Diagram

AMD Socket S1g1 2 SO-DIMM
Memory Bus, dual channel Sockets
(single and dual core)
Hypertransport 2000 MT/s DDR2
400 / 533 / 667 /
800

Hypertransport

DVI, 2 channel
Northbridge Link
AMD DVI –I
VGA Connector
M690E

LVDS, 2 channel
LVDS-
connector

PCIE x1
PCIE x1
Slot

GBit
PCIE x1 LAN
Realtek GBit
RTL8111C LAN
PCIE x1 RJ45 Realtek
RTL8111C
RJ45
PCIE x1
Minicard
Slot
(optional)
A-LINK System
Thermal
USB
Management
Southbridge SMSC
AMD SMBus
SCH5027
SB600
IDE
CF-Card- IDE
Slot

SPI
Flash

PCI-Bus 1 PCI Slot Firewire

32Bit / 33MHz LSI FW322
(2 slots possible
via riser)

1ext. 1394
1int. 1394
HDA Audio
HDA Link Realtek
ALC262
LPC-Bus TPM Super I/O
Infineon SMSC Mic in/HP out
4x Serial ATA (optional) SCH5027 Line in / out
2 COM Ports Front Panel
8 USB 2.0 Ports 2xPS2 SPDIF
1/2/3/4/5/6/7/8

March 2008 Revision 1. 5 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

1.5 Feature details

Board D2703 Comment

Variant S1x
Format Mini-ITX
Socket S1g1 √
CPU Support
Low-power Sempron up to 9W
AMD Mobile Sempron up to 35W
AMD Mobile Turion up to 35W
Dual Core support √

Northbridge / Stepping AMD M690E / A12

Southbridge / Stepping AMD SB600 / A21

Audio Codec / Stepping ALC 262 / C2

High Definition Audio √

AC97 -
Audio

Buzzer onboard √
Sound via internal system speaker
-
support
Stereo Audio / Multichannel Audio √/-
Jack detection √
Adjustable PC Beep Volume -
nd
LAN/2 LAN on Motherboard / √/√
Stepping RTL8111C / B
LAN Speed 10 / 100 / 1000
LAN

PXE / BootP √/-

Basic AOL II for LOM -
ASF support -
Super I/O SCH5027
BIOS Flash device LPC / SPI -/√
Miscellaneous

Flash size / Segment type 8 Mbit/4k

TPM 1.2 / TCG Spec -/- Infineon TPM , Layout prepared
Clock Synthesizer Realtek
Firewire Controller / Stepping LSI FW322
Watchdog is offered by hardware.
Watchdog (inside SB600) √ To use it the customer needs to
program it via software/application
Memory
DDR1 / DDR2 -/√ SO DIMM
DDR Channels 2
PC3200 DDR2 SDRAM (DDR400) √
PC4200 DDR2 SDRAM (DDR533) - Possible, but not validated
PC5300 DDR2 SDRAM (DDR667) √
PC6400 DDR2 SDRAM (DDR800) √

March 2008 Revision 1. 6 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

Max Memory depends on

Maximal main memory size 4 Gbyte availability of memory modules

Connectors external
USB Ports 4
PS/2 Keyboard/Mouse √/√
LPT port -
COM1 port √
COM2 port -
LAN RJ45 / 2nd RJ45 √/√
only 1xDDC-data -> in case of dual
DVI-I (incl. VGA), dual-channel √ display only one display can be
detected automatically
Rear

Firewire √ No boot support

S/PDIF IN electrical / optical -/-

S/PDIF OUT electrical / optical -/-
Mic In -
Line In √ Line In can be used as MIC In

Line Out √
7.1 Audio connector -
√
DC-Plug
max. 5A@24V
Connectors internal
24-pin BTX connector can be
ATX (2*10) √
connected as well
Option to supply 24V DC
Power

DC Plug √ internally (within ATX

connector )
for 2.5” HDD or optical drive; to
Drive power output √ be used if mainboard is
powered via 24V DC input.
SO DIMM Connectors 2
Memory

DIMM Socket 1 color Black

DIMM Socket 2 color Black
USB Port (10 or 12 Pin) 10
USB

Two connectors; two channels

Internal USB Ports 4
per connector
Max. 100mA@-12V
1 / 33MHz 3,3V und 5V Support
PCI

PCI Slots / Frequency

Two Slot Riser

PCI Express x1 1
PCIe

PCI Express x16 -

Minicard-Slot (incl. USB and PCIe) - Layout prepared

Minicard-Sideband Connector - Layout prepared

Compliant to 10-pin Intel front
Frontpanel-Connector √ panel connector
connector
Feature-Connector √
LVDS-connector √
Backlight Connector (8-pin) √
Communi

Configurable to IRDA via BIOS-

COM2 Connector √
cation

Setup
Only one device allowed because
√/-
Primary/Secondary IDE CF-Slot is also connected to
primary IDE

March 2008 Revision 1. 7 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

Support for Memory-CF-cards only

CF-Slot √
SATA-II 4
Floppy Standard/Slim line -/-
Firewire 10-pin Pin header √
S/PDIF IN electrical -
Audio

S/PDIF OUT electrical √

Audio CD In -
Audio Front panel Support √ Incl. AC97 (“legacy”) support

Intrusion Connector -
Main SMBus -
BMC SMBus -

Power Button Connector Frontpanel connector

Only green Power LED (no

sleep LED)
Power LED support √ On = Working
Blink = Standby
Off = Off
Storage interfaces
IDE Transfer rate ATA33/
√/√/√/√
ATA66/ATA100/ATA133
IDE

ATA66 cable detect -

IDE-Reset 5V-Level √
Serial ATA 3GB/s √
SATA

Serial ATA Raid 0 / 1 / 10 / 5 √/√/√/-

Serial ATA NCQ √
AHCI Support √
System security
Basic features √

Internal USB SCR Power ON support -

Advanced
features

External USB disable -

Disable USB-Power at Power Off (S5) √
IPSec-Support -

System Management & Thermal

Management
Intrusion -
featur
Basic

es

Message LED support -

IDE / SATA / SCSI LED support √/√/-

Voltage supervision 12V / 5V / CMOS

Advanced
features

-/-/-
Battery

BMC Alert LED support -

March 2008 Revision 1. 8 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

Temperature sensor CPU / Inside1 / Inside 1 is within SIO

√/√/√/- Inside 2 is within Northbridge
Inside2 / Outside via BMC-SMBus
Thermal management features

HDD SMART temperature support -

Power supply fan: regulation /
-/-
supervision
FAN 1 (CPU) fix / regulation /
-/√/√
supervision
FAN1-Header (CPU) 4 pin √
FAN 2 (System) fix / regulation /
-/√/√
supervision
FAN2-Header (System) 4 pin √
FAN 3 (AUX) fix / regulation /
-/√/√
supervision
FAN3-Header (AUX) 4 pin √
PSU Control ( Power Supply
-
Monitoring )
ACPI features √
Power management

Save to RAM (S3) / Save to Disk (S4) √/√

VCCaux LED -
FSC PS/2 Keyboard power button
√
support
USB wake up support S3 to S5
Wake up via PS/2 -
COM wake up support -
PCI PME wake up √
WOL over onboard LAN √
OEM

OEM BIOS Logo possible √

CMOS Clear Jumper √

Tin plated PCB √

Features
Special

√
Long lifetime capacitors (24/7, 60° C
operating scheme)
Operating Temperature 0-60° C Depends on cooling so lution

March 2008 Revision 1. 9 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

2 Chipset description
2.1 Host Interface (CPU)
The mainboard supports mobile AMD processors in an S1g1 package.

Front Side Bus : max. 2000 MT/s

1st and 2nd Level Cache: Cacheable address space is 4GB
ECC support : No

2.2 System Memory Interface

Technology: DDR2 400 / 533 / 667 / 800 unbuffered SO-DIMM
modules
200 Pin, 1.8V, 64Bit (4 internal banks required)
Supports 256Mb, 512Mb, 1Gb DDR2 technologies
4 internal banks (256Mb, 512Mb), 8 internal banks (1 GB)
supported

Total memory size: From 256Mbytes up to 4 Gbyte Memory

The amount of useable memory depends on add-in cards and
BIOS settings. If 4GByte are installed, the useable memory will be
approximately 3GByte.

Granularity: 256, 512, 1024 or 2048 Mbyte per socket.

ECC support: No

2.3 User experience features

2.3.1 Graphics
Integrated AMD Radeon X1250 graphics

2D Acceleration Features
• Highly optimized 128-bit engine, capable or processing 4 pixels per clock

• Supports a maximum resolution of 2048x1536 @ 32bpp

• Game acceleration including support for Microsoft’s DirectDraw

3D Acceleration Features
• Full DirectX® 9.0 support

• 3D Texture support, including projective 3D textures

• Anti-aliasing using multi-sampling algorithm with support for 2,4, and 6 samples

• New generation rendering engine provides top 3D performance

• Support for OpenGL format for Indirect Vertices in Vertex Walker

Motion Video Acceleration Features

• Enhanced MPEG-2 hardware decode acceleration

• MPEG-4 decode support

March 2008 Revision 1. 10 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

• Hardware acceleration for WMV9 playback

• Supports high quality DVD and time-shifted SDTV/HDTV television playback with low CPU
usage

Multiple Display Features

• Dual independent displays

o Resolution, refresh rates, and display data can be completely independent for the two
display paths

• Supports both interlaced and non-interlaced displays

• Integrated HD Audio controller for HDMI audio data

Integrated LVDS
• Integrated dual-link 24-bit LVDS interface

• up to 2048 * 1536 panel resolution

• FPDI-2 and OpenLDI compliant

• The following resolutions are available via BIOS Setup :

• 640 * 480 6bit single

• 800 * 600 6bit single
• 1024 * 768 6bit single
• 1024 * 768 8bit FPDI single
• 1280 * 1024 8bit FPDI dual
• 1366 * 768 8bit LDI dual
• 1920 * 1080 8bit LDI dual

• Resolutions/timings can be adjusted by system integrators to other LVDS display

parameters via a specific tool

DVI
• Supports dual link DVI

• 1650 Mbps/channel with 165 MHz pixel clock rate per link

• The size of the Graphic Memory can be changed in Bios Setup. The maximum memory is
256MB

• Max. Resolutions

o DVI single link

1920x1200 @ 60Hz

o DVI dual link

4:3 2048x1536 @ 60Hz

16:9 2560x1440 @ 60 Hz

16:10 2456x1536 @ 60 Hz

March 2008 Revision 1. 11 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

VGA CRT
• Max. Resolution 2048x1536

2.3.2 Audio
Chip vendor and type: Realtek ALC 262C
Feature: HD Audio Codec
Buzzer
S/PDIF out support
Audio architecture
Audio Codec
ALC 262
L Port L
Port
R B D R

L Port L
Port
R C E R

L
Port
R F
Mono
out

L SPDIF
CD
R in out

Audio
Codec D2703-S default
Ports

B -
C Line in Rear connector
D Line out Rear connector
E Headphone out internal HDA connector
F Mic In internal HDA connector
CD in -
Mono out -
S/PDIF out Internal connector

Electrical input characteristics

Line: Stereo max. 1,5Vrms input voltage
Microphone: Supports electret microphones
With Mic boost max. 0,15Vrms
without Mic boost max. 1,5Vrms

Electrical output characteristics

Headphone: Stereo max. 1Vrms output voltage at 32Ohm load, approximately
30mW (level from 0 dB up to -46 dB)
Usable as Line out

Line: Stereo max. 1Vrms output voltage at 10kOhm load

March 2008 Revision 1. 12 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

Mute rules for plugged-in audio devices

Possible Audio Outputs Active Output (other
outputs are muted)
Internal Headphone- Line-
Speaker Output Output
(always (Front) (Rear)
connected)
X - - Internal Speaker
X - X Line - Output (rear)
X X - Headphone-Output
(front)
X X X Headphone-Output
(front)

X: accessory plugged-in
-: no accessory plugged-in

Remark:
• System Beeps are only hearable via onboard buzzer.
• The mode of the internal Audio Front panel connector can be changed in
BIOS-Setup between HDA and AC97

2.3.3 LED Status indicators

External status indicators
Indicator Signaling Description ACPI State APM State
System state ‘Power On’ LED is on System is full working G0 S0 On

‘Power On’ LED is blinking System is sleeping G1 S3 Stand by

‘Power On’ LED is off System is off G3 Off

Hard disk ‘Hard disk’ LED is flashing Drive access G0 S0 On

Off No drive access
G1 S3 – S4 Stand by
G2 S5 Soft off
G3 Off
Recommended colors
‘Power On’ LED should be green
‘Hard disk’ LED should be green

Remark: If Power button override is needed in any case, a failure has occurred prior
to that situation. Board or chipset behavior is almost undefined after power button override!
This means beside power LED or LCD back light on any wakeup source like Wake on LAN;
Wake on Ring; PME etc. is undefined or signals are in default polarity condition and might
not work like defined in this board spec.
This "undefined" system state will be recovered first after pressing power button again;
means switching system back on again!

March 2008 Revision 1. 13 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

2.4 Communication features

2.4.1 USB Ports
Chip vendor and type: AMD SB600
Support: 1,5Mbits/s, 12Mbits/s and 480Mbits/s (low-, full- and high-speed)
USB Specification Revision 2.0
USB disable Supported via BIOS option
Cable length: Board will only support USB 2.0 compliant cables with a maximum
length of 12 inches. The cables must have an impedance of 90
ohms. Furthermore the cables must have a twisted signaling pair
for each individual port. That means each port has two twisted
signaling pair and one GND cable and one power cable in one
jacket with inner and outer shield. The shield of the cable must be
connected with GND cable of the connector. These cables can be
connected to the internal dual channel connector. For further
details see chapter 6 in USB 2.0 specification.

March 2008 Revision 1. 14 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

USB architecture

EHCI
Debug

USB Port 0

Conroller #0
UHCI

USB v1.1
Internal Connector
Overcurrent
UHCI USB Port 1
Front Connector
EHCI

EHCI
USB Port 2
Conroller #1

UHCI
USB v1.1

Internal Connector
Overcurrent
UHCI USB Port 3
Internal Connector
EHCI

EHCI
USB Port 4
Conroller #2

UHCI
USB v1.1

Front Connector
Overcurrent
UHCI USB Port 5
Rear Connector
EHCI

EHCI
USB Port 6
Conroller #3

UHCI
USB v1.1

Internal Connector
USB v2.0 (Enhanced Host Controller)

Overcurrent
UHCI USB Port 7
Rear Connector
EHCI

EHCI
USB Port 8
Conroller #4

UHCI
USB v1.1

Rear Connector
Overcurrent
UHCI USB Port 9
Conroller

Rear Connector
EHCI

March 2008 Revision 1. 15 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

2.4.2 PS/2 Keyboard and Mouse Port

Chip vendor and type: SMSC 5027
Feature: PS/2 Keyboard and Mouse interface
Support: Power fused with polyfuse
External connector: Two external PS/2 Mini-DIN connectors
2.4.3 Serial Port
Chip vendor and type: SMSC 5027
Feature: Two Serial Ports with FIFO, 16550 compatible
Connector: One external standard, one internal (shared with IrDA)
Support: Interrupts routable for PnP
2.4.4 Local Area Networking – Gigabit Ethernet Port
Chip vendor and type: Realtek RTL8111C-GR
Feature: Integrated 10/100/1000 Mbit/s transceiver
Supports PCI Express 1.1

Wake on LAN: by interesting packets, link status change and Magic-PacketTM

Special feature: Remote boot support by Bootix PXE

MAC address is displayed in the “Info” menu of the BIOS setup

Connector: RJ45

LED-signaling: Left LED: Link: green LED

Activity: green LED is flashing
Right LED: 10Mb link: LED off
100Mb link: green LED
1000Mb link: yellow LED

Note: D2703-S has two LAN ports. Both LAN parts are identical.

2.5 Storage device features

2.5.1 IDE Interface
One parallel ATA hard disk controller is available on the board.
The hard disk controller supports Bus master IDE, ultra DMA 33/66/100/133 MHz and
standard operation modes.

The primary controller is shared between the IDE connector and the Compact Flash
connector. The Compact Flash is always master, therefore if a CF Card is used the device at
the IDE connector must be configured as slave.

Support:
• ATA and CF connector
• A maximum cable length of 18 inches is supported
• Up to two IDE devices possible

CF Card Cable at IDE Master at IDE Slave at IDE

Connector Connector Connector
Populated Only 40 NOT Possible Possible
conductor
cable possible
Not Populated 40- and 80 Possible Possible
conductor
cable possible

March 2008 Revision 1. 16 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

2.5.2 Serial ATA (SATA)

Two integrated SATA Host controllers with support for independent DMA operation are on
the board. The two SATA controllers can serve up to four ports with 3.0 GB/s.

Support:
• Up to four SATA devices
• Gen2 Speed , 300 Mbyte/s
• AHCI
• Raid 0,1,10
• NCQ
• Maximum cable length of 39, 97 inches is supported.

2.5.3 Firewire
Chip vendor and Type: LSI FW322 07
Support:
• Two fully compliant cable ports
• Supporting 400Mbit/s, 200Mbit/s, and 100Mbit/s traffic

2.6 SPI Flash

Chip size: 8Mbit

2.7 System security features

2.7.1 Trusted Platform Module
Trusted Platform Modules are a Trusted Computing Group (TCG) security solution to
increase the system security. The TPM resides on the motherboard and uses the LPC bus
to communicate with the rest of the platform.

Chip vendor and type: Infineon SLB9635 TT1.2

Feature: TPM1.2 compliant Trusted Platform Module

2.8 System monitoring and management features

2.8.1 Basic system monitoring and management
Chip vendor and type: SMSC 5027
Wake-On-LAN: The wake up possibility depends on the LAN card. Most of the
cards are able to wake up by a Magic-PacketTM. The onboard LAN
controller is able to wake up by interesting packets, link status
change and Magic- PacketTM.
2.8.2 Fan Control
Basic Fan Control is to keep fan noise as low as possible, by reducing fan speed dependent
on CPU temperature, with simultaneous consideration of CPU
damage protection caused by overheating. Basic Fan Control can
be disabled and fan speed will be full regardless of the CPU
Temperature.
Basic Fan Control is done by an onboard chip connected to the SM bus.

With this Basic Fan Control realized in hardware the advantages compared to conventional
software monitoring are obvious:
Suitable for all operating systems and processor types
No additional load on processor (performance)
Optimum reliability, even if process faults are present in the
operating system

March 2008 Revision 1. 17 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

Optimum noise reduction

Temperature: Measurement of the processor diode temperature with an on chip

temperature sensor.

BIOS support: Fan Control Disable/Enable

Note:
• System integrators can change the default system monitoring settings via the tool
“SilentFanConfig”
• Only one Fan per connector is allowed

March 2008 Revision 1. 18 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

3 Power and power management features

3.1 General ACPI issues
ACPI requires an “ACPI ready” operating system!
The ACPI functionality gives the operating system the direct control over the power
management and Plug and Play functions of the system. It detects all system and device
power state transitions. It puts devices in and out of low-power states depending on user
preferences and applications. ACPI defines four global states Gx and six system states Sx:
State Description Wake up Power
time consumption
G0 S0 Normal working Not possible high
G1 S1 Is not supported
S2 Is not supported.
S3 Save to RAM – All components are switched Approximate Depending on the
off, except for the RAM, in which the status 5 sec user enabled wake
before power down is saved, and also for up resources!
defined devices via which the PC can be woken
up again.
Attention! Data which has not been backed up
will be lost in the event of a power failure!
S4 Save to Disk (OS hibernate) – All components Approximate
are switched off, except for defined devices via normal boot
which the PC can be woken up again. time
G2 S5 Soft off – The system is switched off and can Normal boot Very low
only be switched on again via the power-on time
button at the case or keyboard.
G3 Mechanical off Not possible Zero
System wake up
A wake up means a system state transition from G1/S1–S4 to G0/S0 state. The system
could wake up from G2/S5 only by the “System Power Button”. No other wake up events are
supported by the ACPI specification!
The system could wake up from G1/S1–S4 by a several wake up events, depending on the
systemboard implementation.
System go to sleep
The user and the operating system could force the system from the G0 state into a sleeping
state. The destination state depends on the operating system power management policy

March 2008 Revision 1. 19 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

3.2 Power supply requirements

3.2.1 DC Plug
Power Supply Requirements for onboard components
(Typical: Windows XP Idel, AMD Sempron 2100+, 2GB DDR2 667)

D2703 –S Voltage 24Volt, max. Current 5A

Maximal Capacitive Max Ripple / Typical Mainboard

Source Voltage
variation Load D2703 1 Noise Current
D2703-S, +24V +10% / -15% 700µF 400mVpp 0.6A
DC-In

1) Capacitive Load of mainboard. The power supply should at least be able to power up
and operate normally with the following capacitances simultaneously present on the DC
outputs.

Important Note

• The internal power supply input (ATX connector) and external 24V DC input
shall under no circumstances be operated simultaneously, as this will cause
irreparable damage to the mainboard.

• If for any reason the power supply input is changed from internal to external or
vice versa (e.g. for evaluation tests), make sure to wait at least 5 minutes after
disconnecting the internal power input and connecting the external power input
or vice versa. Otherwise the remaining charge of onboard capacitors may
cause irreparable damage to the mainboard.

Any damage caused by misuse of the power supply inputs is excluded from the
standard warranty.
Fujitsu Siemens Computers can not be held liable for any damages that result from
inappropriate use of the power supply inputs.

March 2008 Revision 1. 20 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

3.2.2 ATX Power Plug

Power Supply Requirements for onboard components
(Typical: Windows XP Idle, AMD Turion TL-52, 2GB DDR2 667)
(Max: AMD Stress Tool, AMD Turion TL-66, 4GB DDR2 667)

Capacitive Load Typical

Max. PS Load Max. Mainboard
Source Voltage D2703-S2 Mainboard
variation (min.)1 Current
Current
Main + 12V +/- 5 % 0.15A 1000µF 0.7A 2.8A
power - 12V +/- 10 % - 10µF - -
supply + 5,0V +/- 5 % 1A 470µF 1.5A 3A
+ 3,3V +/- 5 % 0.3A 470µF 0.6A 0.6A

Auxiliary + 5,0V +/- 5 % 0.1A 1000µF 0.15A 0.15A

power
supply

1) PS must support these minimum load conditions for mainboard incl. processor and
memory if there is no power consumption by any additional components.
2) Capacitive Load of mainboard. The power supply should at least be able to power up
and operate normally with the following capacitances simultaneously present on the DC
outputs.

Note:
During power-on / power-off, the power supply must fulfill the general ATX
requirements regarding ramp-up/down timing for all supply voltages and the
Powergood output.

3.2.3 Internal 24V DC Plug

24V DC can be supplied via Pin 18 of the ATX connector. Ratings are the same as specified
in 3.2.1

March 2008 Revision 1. 21 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

3.3 Power loadability

Fuse Function
Number Max. current Description
1 750mA DVI/VGA
PS2
2 1100mA Firewire
3 2,0A USB port 5 rear
USB port 7 rear
USB port 8 rear
USB port 9 rear
4 2,0A USB port 0 internal
USB port 2 internal
USB port 3 internal
USB port 6 internal

3.4 Power distribution

Maximum output current for each sink.

24V DC power supply

P3V3P P3V3P_Aux VCC VCC_DUA P12VN P12VP
L
Source 5A 0.8A 4.5A - 0.1A 2.3A
Limit
PCI Slot 5A 0.37A 4.5A - 0.1A 0.5A
PCIe 3A 0.37A - - - 2.1A
Minicard 1A 0.37A - - - -
USB - - 4A - - -
CF - - 1A - - -
LVDS 1A - 1A - - -
Backlight - - 1.5A - - 1.5A
Drive Power - - 1A - - 1A
Firewire - - - - - 1A
Feature 1A - - - - 1A
connector

Note:
• Source Limit is the maximum current provided to the customer
• For every Voltage over all sinks not more than the Source Limit is allowed.
• In Power State S5 the max. current for the Aux Voltage is 700mA

March 2008 Revision 1. 22 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

Standard ATX power supply

P3V3P P3V3P_Aux VCC VCC_DUA P12VN P12VP
L
Source Power 0.8A Power - Power Power
Limit supply supply supply supply
PCI Slot 5A 0.37A 5A - 0.1A 3A
PCIe 3A 0.37A - - - 3A
Minicard 1A 0.37A - - - -
USB - - 4A - - -
CF - - 1A - - -
LVDS 1A - 1A - - -
Backlight - - 1.5A - - 1.5A
Drive Power - - 1A - - 1A
Firewire - - - - - 1A
Feature 1A - - - - 1A
connector

Note:
• Source Limit is the maximum current provided to the customer
• For every Voltage over all sinks not more than the Source Limit is allowed.
• In Power State S5 the max. current for the Aux Voltage is 700mA

3.5 Capacitive Load

Maximum capacitive load the customer can add to each power rail

Source Voltage Max. Capacitive Load (max.)

variation 24V DC powered

Main power + 12V +/- 5 % 470µF

supply - 12V +/- 10 % 470µF
+ 5,0V +/- 5 % 1000µF
+ 3,3V +/- 5 % 1000µF

Auxiliary + 5,0V +/- 5 % 470µF

power supply

If the board is powered with a standard ATX supply the max. load depends on the ATX
power supply.

3.6 System battery lifetime

Approximately 5 years retention.
Battery on socket for environmental protection

March 2008 Revision 1. 23 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

4 System bus overview

4.1 PCI-Bus
Support: 32Bit / 33MHz
3.3V and 5V supply voltage on PCI connectors
3.3V auxiliary supply voltage on PCI connectors (pin A14)
PCI Add-In Cards according to the PCI 2.3 Specification should be
used.

The mainboard provides a universal PCI-Bus Connector to support 5V and 3.3V Add-In
Cards. It is the system integrators responsibility to test 5V Cards because power delivery is
limited to 25W for all PCI-Slots in total.

4.2 PCI-Express and PCI-Bus device interrupts tables

D2703-S
1 slot
Onboard controller Onboard two slot riser riser
OHCI USB 1.1 EHCI PCI PCIe PCI PCI PCI
Dev Dev Dev Dev Dev Dev

HD Audio

Firewire

Graphic
SM Bus

13 Fn 13 Fn 13 Fn 13 Fn 13 Fn 13 Fn
Lan 1

Lan 2

0 1 2 3 4 5
Sata

1 st 2 nd 3 rd 4 th 5 th 2.0 Slot 1 Slot 2 Slot 1 Slot 2 Slot 1

1 (A) ■ - - - - - - - - - - - - - - - - -
2 (B) - ■ - ■ - - - - - - - - - - - - - -
3 (C) - - ■ - ■ - - - - - - - - - - - - -
4 (D) - - - - - ■ - - - - - - - - - - - -
5 (E) - - - - - - - - - - ■ - - A □ B A A
6 (F) - - - - - - - - - - - ■ - B □ A B B
7 (G) - - - - - - ■ - - ■ - - ■ C □ D C C
8 (H) - - - - - - - - ■ - - - ■ D □ C D D

March 2008 Revision 1. 24 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

5 System Resources
5.1 SMBus address table
This table describes the used part of the possible SMBus address map.
SMBus Address Function Description
88h 0001 001xb SB600 Slave
5Ch 0101 110xb SMSC 5027
60h 0110 100xb EEPROM write
protect of the
DIMM 1
62h 0110 101xb EEPROM write
protect of the
DIMM 2
A0h 1010 100xb EEPROM of the Module 1
DIMM 1

A2h 1010 101xb EEPROM of the Module 2

DIMM 2

Bxh 1011 xxxxb Reserved Error LOG

EEPROM
D2h 1101 001xb Clock synthesizer
E6h 1110 011xb BMC Automedon

5.2 Frequency and bandwidth overview

Source Frequency /MHz Bandwidth
AMD GMCH
CPU FSB 800 6,4 GB/s
Memory 400,533,667,800 6,4 GB/s
PCIe x1 1250 2.5Gb/s
DAC Up to 350 Up to 350 Mpixel/s

SB600
A Link 100 2GB /s
PCI-Bus 2.3 33 133 MB/s
SATA II 1500 300 MB/s
HD-Audio 24 1,536 MB/s
LPC-Bus 33 16,5 MB/s
USB (low-, full-, high speed) 48 1,5Mb/s \ 12Mb/s \ 480Mb/s
Real time clock 32,768kHz
SMBus 10kHz 1,25 MB/s
Southbridge and Super IO 14

5.3 Compliant list

ACPI: Advanced Configuration and Power Interface Specification
Revision 2.0 - Intel, Microsoft and Toshiba Corporation
APM: Advanced Power Management Specification Revision 1.2
Intel and Microsoft Corporation
BBS: BIOS Boot Specification Revision 1.01
DMI: Desktop Management Interface Specification Revision 2.0
IAPC: Instantly Available Power Managed Desktop PC Design Guide
Revision 1.1 - Intel Corporation
March 2008 Revision 1. 25 / 49
OEM Sales Confidential
 Mini-ITX Industrial Mainboard

OnNow: OnNow Power Management Architecture Specification

Version 1.0b - Microsoft Corporation
PC99: System Design Guide Revision 1.0
Intel and Microsoft Corporation
PC2001: System Design Guide
Intel and Microsoft Corporation
PCI-Bus: Peripheral Component Interconnect Bus Specification Revision 2.3
PCI Special Interest Group
WfM: Wired for Management Specification Revision 2.0
Intel Corporation
PCI Express PCI Express 1.0a

March 2008 Revision 1. 26 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

6 Configuration jumper table

6.1.1 Functions controlled by the configuration jumper
Pin Signal
1 GND
2 Password Skip (SKP)
3 GND
C Key
5 GND
6 Recovery BIOS (RCV)

Default Jumper position (Password Skip disabled and Recovery BIOS

disabled)

Pin 1 Pin 2

Password Skip enabled

Pin 1 Pin 2

Recovery BIOS enabled

Pin 1 Pin 2

6.1.2 Clear CMOS jumper function description

Pin 1

Pin Signal Pin Signal

1 GND 2 Vbat SB
3 Vbat

Note: The default state of the Jumper is 2-3 connected. To clear the SB600 CMOS value
shorten pin 1-2

Attention! Jumper must be in default state during normal operation!

6.1.3 LVDS LCD Panel Power

Pin 1

Pin Signal Pin Signal

1 VCC (5V) 2 Power_LVDS
3 P3V3P

With this jumper the LVDS operating voltage can be selected.

Note: The default setting is 3,3V

March 2008 Revision 1. 27 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

7 Special Features
7.1 GPIO Port

8Bit gpio port connected to the Southbridge SB600.

Gpio00 … gpio 07 are connected to gpio53 …gpio60 of SB600.

The registers are in PCI config space: Bus 00h, Device 14h, Function 00h

Direction (0-Output;1- Input status Output value (0-Low;1-High)

Input) Default is Low
Default is Output
Feature Gpio53 PCI_Reg:52h; Bit[4] PCI_Reg:52h; Bit[8] PCI_Reg:52h; Bit[0]
connector Gpio 0
Feature Gpio54 PCI_Reg:52h; Bit[5] PCI_Reg:52h; Bit[9] PCI_Reg:52h; Bit[1]
connector Gpio 1
Feature Gpio55 PCI_Reg:52h; Bit[6] PCI_Reg:52h; Bit[10] PCI_Reg:52h; Bit[2]
connector Gpio 2
Feature Gpio56 PCI_Reg:52h; Bit[7] PCI_Reg:52h; Bit[11] PCI_Reg:52h; Bit[3]
connector Gpio 3

Feature Gpio57 PCI_Reg:54h; Bit[4] PCI_Reg:54h; Bit[8] PCI_Reg:54h; Bit[0]

connector Gpio 4
Feature Gpio58 PCI_Reg:54h; Bit[5] PCI_Reg:54h; Bit[9] PCI_Reg:54h; Bit[1]
connector Gpio 5
Feature Gpio59 PCI_Reg:54h; Bit[6] PCI_Reg:54h; Bit[10] PCI_Reg:54h; Bit[2]
connector Gpio 6
Feature Gpio60 PCI_Reg:54h; Bit[7] PCI_Reg:54h; Bit[11] PCI_Reg:54h; Bit[3]
connector Gpio 7

Note: See chapter 9.2.12 for GPI/O hardware details!

7.2 Watchdog
Read Watchdog base at PM_Reg 6F:6C
Access PM_Reg over IO mapped registers CD6/CD7. CD6 is the index register, CD7 is the data
register. You have to program CD6 with the address you want to read, and then you can read/write the
data over CD7.

PM_Reg:69h Watchdog timer disable. Program bit0=0 to enable

Watchdog
PM_Reg:6Ch Watchdog base address [7:0]
PM_Reg:6Dh Watchdog base address [15:8]
PM_Reg:6Eh Watchdog base address [23:16]
PM_Reg:6Fh Watchdog base address [31:24]

The default value for the Watchdog base is FEC000F0h

March 2008 Revision 1. 28 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

March 2008 Revision 1. 29 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

8 Mechanics
8.1 Form factor and Dimensions
Form factor: Mini-ITX
Dimensions: 170 mm x 170 mm
Component placement:

I/O Connectors (Rear)

March 2008 Revision 1. 30 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

8.1.1 Riser E318

Riser with 2 PCI Slots

Form factor: proprietary

Dimensions: 113mm x 80mm
Placement

8.1.2 Riser D2704

Riser with 1 PCI Slot

Form factor: proprietary

Dimensions: 94mm x 32mm
Placement

March 2008 Revision 1. 31 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

9 Connector definitions
Name Description
Pin Pin Numbers in the connector
Signal Assignment
Type AI Analog Input
AO Analog Output
I Input, TTL compatible if nothing else stated
IO Input / Output, TTL compatible if nothing else stated
IOT Bi-directional tristate IO pin
IS Schmitt-trigger input, TTL compatible
IOC Input / open-collector Output, TTL compatible
NC Pin not connected
O Output, TTL compatible
OC Output, open-collector or open-drain, TTL compatible
OT Output with tri-state capability, TTL compatible
LVDS Low Voltage differential Signal
Power Power supply or Ground reference pins

ioh/iol
Pull U/D
Comment

Important note
The system integrator is fully responsible for the usage of appropriate connectors
and cables in order to fulfill the technical requirements (electrical contact, durability,
power/current levels, signal integrity etc.).

March 2008 Revision 1. 32 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

9.1 External Connectors

9.1.1 24V DC Power Plug

9.1.2 PS/2 Connectors

Keyboard port
Pin 6 Pin 5

Pin 4 Pin 3

Pin 2 Pin 1

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 KBDDAT IOC - PU3K3 - 4 VCC (polyswitch fused) Power - - -
2 Not connected N.C. - - - 5 KBDCLK IOC - PU3K3 -
3 GND Power - - - 6 Not connected N.C. - - -

March 2008 Revision 1. 33 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

Mouse port
Pin 6 Pin 5

Pin 4 Pin 3

Pin 2 Pin 1

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 MSDAT IOC - PU3K3 - 4 VCC (polyswitch fused) Power - - -
2 Not connected N.C. - - - 5 MSCLK IOC - PU3K3 -
3 GND Power - - - 6 Not connected N.C. - - -

9.1.3 DVI-I Display Connector

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 T.M.D.S. Data 2- - - - - 16 Hot Plug Detect - - - -
2 T.M.D.S. Data 2+ - - - - 17 T.M.D.S. Data 0- - - - -
3 T.M.D.S. Data 2/4 Shield - - - - 18 T.M.D.S. Data 0+ - - - -
4 T.M.D.S. Data 4- - - - - 19 T.M.D.S. Data 0/5 Shield - - - -
5 T.M.D.S. Data 4+ - - - - 20 T.M.D.S. Data 5- - - - -
6 DDC Clock - - - - 21 T.M.D.S. Data 5+ - - - -
7 DDC Data - - - - 22 T.M.D.S. Clock Shield - - - -
8 Analog Vertical Sync - - - - 23 T.M.D.S. Clock+ - - - -
9 T.M.D.S. Data 1- - - - - 24 T.M.D.S. Clock- - - - -
10 T.M.D.S. Data 1+ - - - - C1 Analog Red Out - - - -
11 T.M.D.S. Data 1/3 Shield - - - - C2 Analog Green Out - - - -
12 T.M.D.S. Data 3- - - - - C3 Analog Blue Out - - - -
13 T.M.D.S. Data 3+ - - - - C4 Analog Horizontal Sync - - - -
14 +5 V Power Power - - - C5 Analog Common Ground Return (R, G,Power
B Out) - - -
15 Ground (+5 V, Analog H/V Sync) Power - - -

Note: Two monitors can be attached via the DVI-I Connector (DVI+VGA), but only one DDC port
is available. Per default the Video BIOS uses the DDC Signal for DVI.

9.1.4 Audio Connectors

Audio Port
Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
Tip Audio Left AI /AO Sleeve Analog GND A Pwr
Ring Audio Right AI /AO

9.1.5 USB
USB port
Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 VCC aux Power - - - 3 Data + USB - - -
2 Data - USB - - - 4 GND Power - - -

March 2008 Revision 1. 34 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

9.1.6 Serial Connector

Serial Port

Pin 1

Pin 6

Pull Pull
Pin Signal Assignment Type ioh/iol U/D Comment
Pin Signal Assignment Type ioh/iol U/D Comment
1 DCD 6 DSR
2 SIN 7 RTS
3 SOUT 8 CTS
4 DTR 9 RI
5 GND

9.1.7 Firewire Connector

1394 external

Pin 2

Pin 1

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 +12V 4 TPB+
2 GND 5 TPA-
3 TPB- 6 TPA+

9.1.8 Ethernet Connector

Gigabit Ethernet

Pin 1

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 MDI0+ 5 MDI2+
2 MDI0- 6 MDI2-
3 MDI1+ 7 MDI3+
4 MDI1- 8 MDI3-

March 2008 Revision 1. 35 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

9.2 Internal Connectors

9.2.1 ATX Power Connector

Signal
Pin Signal Assignment Pin
Assignment
1 +3.3V 11 +3.3V
2 +3.3V 12 - 12V
3 ATX Detect (low asserted) 13 GND
4 + 5V 14 PS on (low asserted)
5 GND 15 GND
6 + 5V 16 GND
7 GND 17 GND
8 Powergood (high asserted) 18 +24V
9 + 5V Auxiliary 19 + 5V
10 + 12V 20 + 5V

The ATX power supply connector previously offered the option to provide -5V via Pin 18 to the
mainboard, which is no longer used for current designs.

The mainboard D2703-S can be powered via Pin 18 of the ATX power supply connector with 24V DC.
The return path (GND) can be connected via Pin 17.

Note:
If the ATX power supply used for a specific implementation still delivers -5V via Pin18 this causes
no damage to the mainboard D2703-S.

In general, Pin 3 of an ATX power supply is connected to GND. The mainboard D2703-S uses Pin 3
to detect if an ATX power supply is connected or not.

March 2008 Revision 1. 36 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

9.2.2 Drive Power Connector

Supply voltage for optional harddisk drive or optical drive if mainboard is powered via DC-
plug.

Note:
Connector is compliant to standard 3.5” floppy power connector

9.2.3 LVDS Backlight Inverter Connector

Ground GND 1
Ground GND 2
Backlight Brightness CTRL tbd 3
Power 5V VCC 4
Power 5V VCC 5
Backlight On/Off Control BL On/Off 6
Power 12V +12V 7
Power 12V +12V 8

Backlight Brightness Control: Provides a variable

voltage between 0V and 5V via a RC filter (2,2kOhm / 20uF).
Basically the voltage level can be selected via BIOS Setup – Peripheral Configuration –
Brightness Control.
If this control signal is used, the system integrator is responsible for the implementation of a
backlight converter that fits to the control output voltage range.

Backlight On/Off Control: Active High, 3.3V

Supplier:
JST, PartNo. B 8B-PH-K-S or compatible connector

March 2008 Revision 1. 37 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

9.2.4 LVDS Panel Connector

Supplier:
Hirose, PartNo. DF13-40 DP-1.25V or compatible connector

March 2008 Revision 1. 38 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

9.2.5 Audio Connectors

High Definition Audio Front Panel Connector

Pin 1 Pin 2

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 HDA Port 1 Left AI /AO - - 6 Jack Sense Port 1 - - -
2 Analog GND A Pwr - - 7 AGND A Pwr - -
3 HDA Port 1 Right AI /AO - - 8 Key - - -
4 FP Presence Detect - - PU4k7 9 HDA Port 2 Right AI /AO - -
5 HDA Port 2 Left AI /AO - - 10 Jack Sense Port 2 - - -

AC97 Audio Front Panel Connector

Pin 1 Pin 2

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 Mic Right AI /AO - - 6 reserved - - - Don't use
2 Analog GND A Pwr - - 7 AGND A Pwr - -
3 Mic Left AI /AO - - 8 Key - - -
4 reserved - - PU4k7 Don't use 9 HPout Left AI /AO - -
5 HPout Right AI /AO - - 10 reserved - - - Don't use

Note: In case of using this connector in AC97/Legacy mode take care for pin 7. This pin is
tied to GND. HP_ON# signaling on this pin is not supported.

9.2.6 USB Connectors

USB Port (internal, 10 pin)

Pin 1 Pin 2

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 VCC Pwr 6 Data positive Port Y -
2 VCC Pwr 7 GND Pwr
3 Data negative Port X - 8 GND Pwr
4 Data negative Port Y - 9 Key -
5 Data positive Port X - 10 N.C. -

9.2.7 Internal Serial Port

March 2008 Revision 1. 39 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

Pin 1 Pin 2

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 DCD - - - - 6 CTS - - - -
2 DSR - - - - 7 DTR - - - -
3 SIN - - - - 8 RI - - - -
4 RTS - - - - 9 GND - - - -
5 SOUT - - - -

9.2.8 ATA Interface

Intelligent drive electronics (IDE) interface
Pin
1

Pin
2

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 RESET_L - - 21 Dmarq - -
2 GND - - 22 GND - -
3 DD7 - - 23 DIOW_L / STOP - -
4 DD8 - - 24 GND - -
5 DD6 - - 25 DIOR_L / HDMARDY_L / HSTROBE - -
6 DD9 - - 26 GND - -
7 DD5 - - 27 IORDY / DDMARDY_L / DSTROBE - -
8 DD10 - - 28 CSEL - -
9 DD4 - - 29 DMACK_L - -
10 DD11 - - 30 GND - -
11 DD3 - - 31 INTRQ - -
12 DD12 - - 32 Not connected - -
13 DD2 - - 33 DA1 - -
14 DD13 - - 34 PDIAG_L : CBLID_L - -
15 DD1 - - 35 DA0 - -
16 DD14 - - 36 DA2 - -
17 DD0 - - 37 CS0_L - -
18 DD15 - - 38 CS1_L - -
19 GND - - 39 DASP_L - -
20 (keypin) - - 40 GND - -

9.2.9 Serial ATA Connector

March 2008 Revision 1. 40 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 GND - - - - 5 Receive data negative - - - -
2 Transmit data positive - - - - 6 Receive data positive - - - -
3 Transmit data negative - - - - 7 GND - - - -
4 GND - - - -

9.2.10 Compact Flash Slot

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 GND Power - - 26 -cd1 n.c. - -
2 d03 in/out - - 27 d11 in/out - -
3 d04 in/out - - 28 d12 in/out - -
4 d05 in/out - - 29 d13 in/out - -
5 d06 in/out - - 30 d14 in/out - -
6 d07 in/out - - 31 d15 in/out - -
7 -cs0 out - - 32 -cs1 out - -
8 a10 out - - 33 -vs1 n.c. - -
9 -ata sel out - - 34 -iord out - -
10 a09 out - - 35 -iowr out - -
11 a08 out - - 36 -we out - -
12 a07 out - - 37 intrq in - -
13 vcc Power - - 38 vcc Power - -
14 a06 out - - 39 -csel out - -
15 a05 out - - 40 -vs2 in - -
16 a04 out - - 41 -reset out - -
17 a03 out - - 42 iordy in - -
18 a02 out - - 43 dmarq in - -
19 a01 out - - 44 -dmack out - -
20 a00 out - - 45 -dasp in/out - -
21 d00 in/out - - 46 -pdiag in/out - -
22 d01 in/out - - 47 d08 in/out - -
23 d02 in/out - - 48 d09 in/out - -
24 -iocs16 n.c - - 49 d10 in/out - -
25 -cd2 in - - 50 GND Power - -

9.2.11 Firewire Connector

Firewire (internal 10 pin)

Pin 1 Pin 2

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 TPA+ - 6 TPB- -
2 TPA- - 7 +12V Power
3 GND Power 8 +12V Power
4 GND Power 9 Key Mech
5 TPB+ - 10 GND Power

March 2008 Revision 1. 41 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

9.2.12 Feature Connector

1 GPI/O_0 GPI/O_1 2
3 GPI/O_2 GPI/O_3 4
5 GPI/O_4 GPI/O_5 6
7 GPI/O_6 GPI/O_7 8
9 VCC_3.3V GND 10
11 VCC_3.3V VCC_5Vaux 12
13 IrDA_Tx GND 14
15 IrDA_Rx GND 16
17 GND VCC_5V 18
19 VCC_12V VCC_12V 20

Parameter Range
GPI/O Input Low -0.5V … 1.3V
Voltage
GPI/O Input High 1.8V …
Voltage VCC_3.3V
GPI/O Output Low max. 0.4V Supplier:
Voltage Compupack, PartNo. R-DRK2-20-S3-SMT or
GPI/O Output High min. 2.4V compatible connector
Voltage
Input Leakage Current max. +/- 10µA
Note: max. load per GPI/O pin: 8mA

9.2.13 Frontpanel Connector

Intel-compliant frontpanel header

10 (KEY) Reserved (NC) 9

8 PowerSwitch_GND ResetSwitch_P 7
6 PowerSwitch_P ResetSwitch_GND 5
4 Power_LED_GND HDD_LED- 3
max. 10mA
2 Power_LED+ HDD_LED+ 1
max. 10mA max. 10mA

9.2.14 FAN Connectors

4-pin fan connector (PWM)

Pin 1

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 GND Power 3 FAN Sense in
2 +12V Power max. 1A 4 FAN PWM out

March 2008 Revision 1. 42 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

9.2.15 PCI Connector

PCI 32 Universal ( Vio = +5V)

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
A1 trst# - - - B1 -12v - - -
A2 +12V Power - - B2 tck - - -
A3 tms - - - B3 GND Power - -
A4 tdi - - - B4 tdo - - -
A5 +5v Power - - B5 +5v Power - -
A6 inta# - - - B6 +5v - - -
A7 intc# - - - B7 intb# - - -
A8 +5v Power - - B8 intd# - - -
A9 reserved - - - B9 prsnt1# Power - -
A10 +vio Power - - B10 reserved - - -
A11 reserved - - - B11 prsnt2# Power - -
A12 key - - - B12 key - - -
A13 key - - - B13 key Power - -
A14 +3.3v aux Power - - B14 reserved - - -
A15 rst# - - - B15 GND - - -
A16 +vio Power - - B16 clk Power - -
A17 gnt# - - - B17 GND - - -
A18 GND Power - - B18 req# - - -
A19 pme# - - - B19 +vio Power - -
A20 ad30 - - - B20 ad31 - - -
A21 +3.3v Power - - B21 ad29 - - -
A22 ad28 - - - B22 GND Power - -
A23 ad26 - - - B23 ad27 - - -
A24 GND Power - - B24 ad25 - - -
A25 ad24 - - - B25 +3.3v Power - -
A26 idsel - - - B26 c/be3# - - -
A27 +3.3v Power - - B27 ad23 - - -
A28 ad22 - - - B28 GND Power - -
A29 ad20 - - - B29 ad21 - - -
A30 GND Power - - B30 ad19 Power - -
A31 ad18 - - - B31 +3.3v - - -
A32 ad16 - - - B32 ad17 Power - -
A33 +3.3v Power - - B33 c/be2# - - -
A34 frame# - - - B34 GND Power - -
A35 GND Power - - B35 irdy# - - -
A36 trdy# - - - B36 +3.3v - - -
A37 GND Power - - B37 devsel# Power - -
A38 stop# - - - B38 pcixcap - - -
A39 +3.3v Power - - B39 lock# - - -
A40 smbclk - - - B40 perr# Power - -
A41 smbdat - - - B41 +3.3v - - -
A42 GND Power - - B42 serr# - - -
A43 par - - - B43 +3.3v Power - -
A44 ad15 - - - B44 c/be1# - - -
A45 +3.3v Power - - B45 ad14 - - -
A46 ad13 - - - B46 GND - - -
A47 ad11 - - - B47 ad12 - - -
A48 GND Power - - B48 ad10 Power - -
A49 ad09 - - - B49 m66en - - -
A50 key - - - B50 key - - -
A51 key - - - B51 key Power - -
A52 c/be0# - - - B52 ad08 - - -
A53 +3.3v Power - - B53 ad07 - - -
A54 ad06 - - - B54 +3.3v Power - -
A55 ad04 - - - B55 ad05 - - -
A56 GND Power - - B56 ad03 Power - -
A57 ad02 - - - B57 GND Power - -
A58 ad00 - - - B58 ad01 Power - -
A59 +vio Power - - B59 +vio - - -
A60 req64# - - - B60 ack64# Power - -
A61 +5v Power - - B61 +5v - - -
A62 +5v Power - - B62 +5v Power - -

March 2008 Revision 1. 43 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

9.2.16 PCI Express Connector

PCIe x1 connector
Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
A1 prsnt# n.c. B1 +12V n.c.
A2 +12V Power B2 +12V n.c.
A3 +12V Power B3 +12V n.c.
A4 GND Power B4 GND Power
A5 jtag2 n.c. B5 smclk Power
A6 jtag3 n.c. B6 smdat out
A7 jtag4 n.c. B7 GND Power
A8 jtag5 n.c. B8 +3.3V out
A9 +3.3V Power B9 jtag1 out
A10 +3.3V Power B10 +3.3V Aux Power
A11 perst# out B11 wake# in
A12 GND Power B12 rsvd in
A13 refclk+ out B13 GND Power
A14 refclk- out B14 PETp0 Power
A15 GND Power B15 PETn0 Power
A16 PERp0 in B16 GND Power
A17 PERn0 in B17 prsnt2# Power
A18 GND Power B18 GND n.c.

9.2.17 Miscellaneous Connectors

Intrusion (Stuffing Option)

Pin 1

Pull Pull
Pin Signal Assignment Type Comment Pin Signal Assignment Type Comment
U/D U/D
1 GND Power 3 CASE_SWITCH_PRSNT_L -
2 CASE_OPEN_L - PU-1M

March 2008 Revision 1. 44 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

Minicard (Stuffing Option)

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 Wake# out - - 27 GND Power - -
2 3.3V Power - - 28 1.5V Power - -
3 Reserved n.c. - - 29 GND Power - -
4 GND Power - - 30 smb_clk n.c. - -
5 Reserved n.c. - - 31 petn0 in/out - -
6 1.5V Power - - 32 smb_data n.c. - -
7 clkreq# out - - 33 petp0 in/out - -
8 uim_pwr out - - 34 GND Power - -
9 GND Power - - 35 GND Power - -
10 uim_data in/out - - 36 usb_d- in/out - -
11 refclk- in - - 37 Reserved n.c. - -
12 uim_clk out - - 38 usb_d+ in/out - -
13 refclk+ in - - 39 Reserved n.c. - -
14 uim_reset out - - 40 GND Power - -
15 GND Power - - 41 Reserved n.c. - -
16 uim_vpp out - - 42 led_wwan# out - -
17 reserved (uim_c8) n.c. - - 43 Reserved n.c. - -
18 GND Power - - 44 led_wlan# out - -
19 reserved (uim_c4) n.c. - - 45 Reserved n.c. - -
20 w_disable# in - - 46 led_wpan# n.c. - -
21 GND Power - - 47 Reserved n.c. - -
22 perst# in - - 48 1.5V Power - -
23 pern0 in/out - - 49 Reserved n.c. - -
24 3.3V aux Power - - 50 GND Power - -
25 perp0 in/out - - 51 Reserved n.c. - -
26 GND Power - - 52 3.3V Power - -

Minicard Sideband (Stuffing Option)

Pull Pull
Pin Signal Assignment Type ioh/iol Comment Pin Signal Assignment Type ioh/iol Comment
U/D U/D
1 +3,3V Aux out - - 6 uim_reset out - -
2 led_wlan# out - - 7 uim_clk out - -
3 led_wwan# out - - 8 uim_vpp out - -
4 w_disable# in - - 9 uim_data in/out - -
5 uim_pwr out - - 10 GND Power - -

Supplier
Compupack, PartNo. R-DRK1-10-S3-SMT or compatible connector

March 2008 Revision 1. 45 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

10 Environmental conditions

10.1 Operating
0°C – 60°C operating temperature (forced cooling).
10% - 90% relative humidity (non-condensing)

10.2 Storage
-20°C – 80°C
5% - 95% relative humidity (non-condensing)

10.3 MTBF calculation

1. 45°C mean component ambient temperature

Continuous operation 24/7 (8.760 hours per year)
MTBF (mean): 223.007 hours (25.5 years)

2. 60°C mean component ambient temperature

Continuous operation 24/7 (8.760 hours per year)
MTBF (mean): 131.950 hours (15.1 years)

Calculation based on EN/IEC 61709 (SN 29500)

March 2008 Revision 1. 46 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

10.4 Temperature Reference Points

10.4.1 Front View D2703-S

Reference Point Limit Temperatures must not be exceeded!!

1) Note: Battery operation is specified in temperature range up to 60°C. Operation between 60°C and 70 °C may
result in:
- Higher self discharge rate
- Decline of specified characteristics
- Danger of leakage increases

March 2008 Revision 1. 47 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

10.4.2 Rear View D2703-S

Reference Point Limit Temperatures must not be exceeded!!

March 2008 Revision 1. 48 / 49

OEM Sales Confidential
 Mini-ITX Industrial Mainboard

11 Glossary of Terms
ACPI Advanced Configuration and Power Interface
AGP Accelerated Graphic Port
AMT Active Management Technology
AoL Alert On LAN
APM Advanced Power Management
ASF Alert Specification Forum
ATA Advanced Technology Attachment
BIOS Basic Input Output System
BMC Baseboard Management controller
CCR Chip Card Reader
CPU Central Processing Unit
CSA Communication Streaming Architecture
DDR Double Data Rate
DIMM Dual Inline Memory Module
DMI Direct Media Interface

DVO Digital Video Out

ECC Error correting code
FSB Front Side Bus
GMCH Graphics and Memory Controller Hub
HDA High Definition Audio

ICH I/O Controller Hub

IDE Intelligent Drive Electronics
LAN Local Area Network
LVDS
MCH Memory Controller Hub

RTC Real Time Clock

SATA Serial ATA
SMBus System Management Bus
SPI Serial Peripheral Interface
SPWG
T.M.D.S. Transition minimized differential signal

March 2008 Revision 1. 49 / 49

OEM Sales Confidential