Do you know AVEVA E3D has In-Canvas Commands like AutoCAD?

In-Canvas commands include all type of commands that you invoke them by typing in the air and then
press Spacebar or Enter button.

When using the In-canvas command prompt the following commands can be typed directly in:

In-Canvas Command     -->     Description

 AIDARC     -->     Invokes function to create AID type Arc.

 AIDBIS     -->     Invokes function to create an AIDLIN bisecting between two non-parallel AIDLINs.

 AIDCIR     -->     Invokes function to create AID type Circle.

 AIDFIL     -->     Invokes function to create filleting AIDARC connecting two non-parallel AIDLINs.

 AIDLIN or L     -->     Invokes function to create AID type Line.

 AIDPOI     -->     Invokes function to create AID type Point.

 AIDTAN     -->     Invokes function to create an AIDLIN tangential to two circles which are non
concentric.

 AIDTEXT     -->     Invokes function to create AID type Text.

 ANGLE     -->     To calculate angle between any two entities.

 BRACING     -->     To specify bracing gaps for existing diagonal elements or members.

 CAMERA     -->     Enables to lock view wrt an object. Also disables 3D orbit mode when it is
enabled.

 CANCEL     -->     Cancels any current operation in-progress.

 COPY or CO     -->     Invokes function to copy selected entities with respect to a base point
selected and also paste them at required locations in a loop.

 COPYBASE     -->     Invokes function to copy selected entities with respect to a base point
selected.

 COPYCLIP     -->     Invokes function to copy selected entities without any base point.

 CONNECT     -->     Enables function to connect any two GENSECs.

 CUTBASE     -->     Invokes function to CUT/PASTE selected entities with respect to a base point
selected.

 CUTCLIP     -->     Invokes function to CUT/PASTE selected entities.

 D or LINDIM     -->     Invokes function to create db type Linear Dimension.

 DELETE     -->     To delete selected entities.

 DIST or DI     -->     To calculate distance between any two entities.

 EM or EDITMODE     -->     Triggers Edit Mode.

 ENDATUM     -->     Create a ENDATU Fixing at selected End of GENSEC. Specs can be set only for
old BS Column and Beam type profiles.

 EXTEND     -->     Enables function to extend the end of a structural element to a reference
element.

 FILLET     -->     To create a Fillet between two non-connected structural elements.

 FLY     -->     Enable FLY mode operation.

 FORCETRIM     -->     To trim an attached GENSEC to selective Pline of Owning GENSEC.

 FOVY     -->     Enables option to enter new Vertical field-of-view angle (Projection mode should
be in Perspective to enable this option).

 GENSECDEF     -->     Triggers function to set default specification wrt existing GENSEC.

 GFITT_CRE     -->     Enable function to create a GENSEC Fitting.

 GFITT_MOD     -->     Enable function to modify a GENSEC Fitting.

 GRIDCY     -->     Invokes function to create a new GRID CYLINDER for Radial Grid only in In-Mode.

 GRIDID     -->     Resets IDs of REFGRDs.

 GRIDPL     -->     Invokes function to create a new GRID PLANE for REFGRD in IN-Mode (Currently
works for a single REFGRD).

 ID     -->     Queries Coordinate Positions at snapped position.

 IN     -->     Triggers IN or Include mode.

 JMOD     -->     Enables you to modify joints on a SECTION.

 LCS     -->     Invokes operation to change Coordinate system between Local and World.

 LINDIMA     -->     Invokes function to create db type Aligned Dimensions.

 LOOKROUND     -->     Enables 3D Orbit mode option to look around a locked view in Perspective
ProjMode.

 M or MOVE     -->     Invokes function to move entities with respect to a base point selected and
also paste them at required locations in a loop.

 MERGE     -->     To merge two members of same element type.

 MI or MIRROR     -->     To mirror any selected Structural Elements by defining a Mirror Plane.

 MITRE     -->     Enables option to Mitre two ends of GENSECs.

 MREDO     -->     Enables you to REDO all previous actions or to desired number of actions.

 NEXT     -->     To go Forwards through Views.

 OUT     -->     Trigger OUT mode by exiting IN mode.

 OUTALL     -->     Takes you all the way out.

 OSNAPD     -->     Triggers Distance Snap Mode function.

 P or PAN     -->     Enables REALTIME PAN option.

 PANARC     -->     Enables function to Create a ARC PANEL using three point or two point
methods.

 PANCIRC     -->     Enables function to Create a CIRCULAR PANEL with multiple options.

 PANDIR     -->     Pans View towards selected PLAN VIEW directions.

 PANDISC     -->     Enables function to Create a DISC PANEL using Center + or two point methods.

 PANELNXTRDISC     -->     Creates a Negative extrusion of a PANEL in Circular Shape in three

 PANELNXTRMULT     -->     Creates a Negative extrusion of a PANEL in Rectangular Shape using

 PANELNXTRRECT     -->     Creates a Negative extrusion of a PANEL in Rectangular Shape using

 PANMULT     -->     Enables function to Create a RECTANGULAR PANEL with multiple points.

 PANOFFSET     -->     Enables function to Create a an Offset Perimeter of PANEL with multiple
points.

 PANRECT     -->     Enables function to Create a RECTANGULAR PANEL using two points.

 PANRING     -->     Enables function to Create a RING PANEL using three point to two point
methods.

 PASTECLIP     -->     To paste any copied or cut elements that are available in current session.

 PFITT_CRE     -->     Enable function to create a PANEL Fitting.

 PFITT_MOD     -->     Enable function to modify a PANEL Fitting.

 PLAN     -->     Set the current View to Plan View mode.

 PR or PROPERTIES     -->     Open Property Window if not opened already in the application.

 PREV     -->     To go Back through Views.

 PROJMODE     -->     Toggles between Projection modes Orthogonal or Perspective.

 REDO     -->     Redo any operation that was previously called back (Performed Undo).

 REFGRD     -->     Enables option to create a Reference Grid.

 RO or ROTATE     -->     Invokes function to rotate any object around any defined axis.

 SCALE     -->     To Scale a Structural Element by selecting a Base Point.

 SECARC     -->     Creates a ARC GENSEC and also gives multiple options to choose the way they
are created.

 SECCUR     -->     Creates a Curved GENSEC and also gives multiple options to choose the way
they are created.

 SECRING     -->     Creates a RING GENSEC and also gives multiple options to choose the way they
are created.

 SECTION     -->     Creates a Straight GENSEC and gives multiple options to choose the way they
are created.

 SELALL     -->     To select all the elements in 3D View.

 SPLICE     -->     To Splice any Structural Element(s) in multiple ways.

 SPLIT     -->     To split any Structural Element(s) in multiple ways.

 STRETCH     -->     To Stretch any Structural Element along a defined path.

 TOWER     -->     Enables option to create a Rectangular Tower Grid.

 TOWERT     -->     Enables option to create a Triangular Tower Grid.

 U     -->     To Undo any current operation.

 UNDO     -->     Enables you to UNDO all operation or to desired number of counts.

 WALK     -->     Enables you to WALK around a Model.

 Z or ZOOM     -->     Enables Zoom options.

 -VIEW or -V     -->     To change any View between Isometric or Orthographic or Plan View.

 -PAN or -P     -->     PANs view wrt base point selection.

 3DO or 3DORBIT     -->     Enables 3D Orbit mode.