ON-BOARD CONTROL INTERFACE ICU 602

ON-BOARD PASSENGER INFORMATION SYSTEM

FEATURES THE ALL IN ONE SOLUTION

The ICU602 control unit processes all protocols and information for
• Alphanumeric keyboard with user-friendly user all Luminator displays, including destination display, route number
interface and backlighting and stop information - no matter which generation of device is in
use.
• Standard interfaces: RS485, Digital I/O, RS232,
USB, IBIS-Slave, GPS, Audio, Ethernet, CAN-Bus Automatic messages such as "Next stop" displays and voice an-
nouncements are controlled by the odometer or (optionally) trigge-
• Optional interfaces: IBIS-Master, Monobus, RS485 red by GPS. Driver announcements are possible inside and outside
the vehicle - e.g. for passengers waiting at a stop.

The control unit fits into any standard radio slot (ISO 7736) and is
equipped for use under tough conditions with an IP-classified front
with dust and water protection. Optionally, the rear side can also be
IP-classified.

In addition to GPS reception, ICU602 has an Ethernet option and the

option of connecting to an on-board gateway. Using the network
connection, the back office can send current information or soft-
ware updates of the displays and devices on-board.

Diagnostic information is automatically sent to the control center

allowing for easy and efficiency troubleshooting and maintenance.

www.luminator.com
ON-BOARD CONTROL INTERFACE ICU 602
ON-BOARD PASSENGER INFORMATIONS SYSTEM

TECHNICAL DATA

Order Information
LTG Sweden AB CU622102-00x 2xRS485+Audio+GPS+Ethernet+IBIS-Slave
CU622102-01x 2xRS485+Audio+GPS+Ethernet +IBIS-Slave with MAN adapter cable
CU621102-000 2xRS485+Audio+GPS+Ethernet+IBIS-Master
Display (Control Unit)
Technology LCD
Display Size 106 mm (W) X 27 mm (H) - viewing display area
Resolution 64 pixels x 256 pixels
Computer
Processor ARM 7
Memory 256 MB
RAM 8 MB

Software
Applications MIE: target texts, configuration and acoustically files
MAW: update and diagnostics
Update USB
IP Ethernet via MAW
Electrical Properties
Operating Voltage 24 VDC (9 - 36 VDC)
Power Consumption Max 0.2 A at 24VDC
Current Consumption 200mA
Interfaces
12 VDC In 1x (Ilag 7p)
24 VDC In 1x (Ilag 7p)
WLAN N/A
CAN 1x (Ilag 30p)
Digital In 1 speedometer, 2 active high (1 analog), 3 active low (Ilag 30p)
Digital Out 2x (relay). (Ilag 30p)
Alarm In Via digital in
Alarm Out Via digital out
Vehicle Signal Via digital in
Car Hold Signal Via digital in
Ethernet 1x (m12 -D)
IBIS (VDV 300) 1x Ilag (option)
IBIS slave (VDV 300) 1x Ilag
MONO 1x Ilag (option)
RS232 1x Ilag 30 (standard)
RS485 2x Ilag 7 (Standard 2 , +1  Optional)
USB 1x
Audio Out 2 channel (line/mic) (Ilag 30)
Mechanical properties
Weight 620 g
Dimensions 178 mm x 115 mm x 50mmm
Color Black
Mounting Radio slot

Disclaimer
Features and specifications are subject to change without notice. Properties relating to the
Goods contained in this document do not constitute the product specifications but typical
values for purposes of description only. January 2021

www.luminator.com
ON-BOARD CONTROL INTERFACE ICU 602
ON-BOARD PASSENGER INFORMATION SYSTEM

TECHNICAL DATA

Environment
Operating Temperature - 25°C to 70°C
Ingress Protection IP67 front, IP30 back
Cooling Passive
Standards
DIN EN 50121-3-2 x
DIN EN 50155 x
ECE-R10 x
ECE-R118 x
Directive 2006/28/EC x
Directive 95/28/EC x
VDV-300 x (option)
Approvals
ECE-R10 (EMV) 04178
E-mark 4178
CE x
Drawings
2D Drawing CU622xxx-000

Disclaimer
Features and specifications are subject to change without notice. Properties relating to the
Goods contained in this document do not constitute the product specifications but typical
values for purposes of description only. January 2021

www.luminator.com