Brushless

DC Fans & Blowers D1225C (for high speed applications) Series □ 120×25mm
■Standard specification
D1225C Max.Airflow Max.Static Pressure Noise Speed
m3/min CFM Pa inH20 dB
Voltage Spec.V Current mA
r/min Rating Operating Range Rating Starting
Model Code
Operating
Temp. RangeﾟC Expectation Life
12 10.2 -13.8 1140 2690 D1225C12BBAZ-00 60℃ 45000hr
4.25 150.1 150 0.60 50.5＊ 5400 35℃ 100000hr
24 20.4 -27.6 580 1210 D1225C24BBAZ-00
12 10.2 -13.8 560 1350 D1225C12B9AZ-00
3.30 116.5 95 0.38 44＊ 4250 −20∼＋60
24 20.4 -27.6 290 650 D1225C24B9AZ-00 60℃ 60000hr
35℃ 100000hr
12 10.2 -13.8 220 970 D1225C12B7AZ-00
2.35 83.0 49 0.20 36.5＊ 3000
24 20.4 -27.6 140 530 D1225C24B7AZ-00
＊ Noise values shown at quiet zone (as shown in the noise graph below).
●Figures in the table are average measured values. Please request the product delivery specification when preparing a purchase specification.
●The characteristics are the values at rated voltage , and normal temperature and humidity.
□ 120 25mm(□4.7 x1.0 )
●The only venturi shape available for these products is a ribbed flange.
Max. airflow：4.25m3／ min ●Depending on quantities, Nidec Servo can meet many of your requirements for customization, such as special connectors, sensors, variable
Max. static pressure：150Pa
Mass：200g speedspecifications and other modifications. Please contact Nidec Servo for more information.
●This fan is specially designed for long life. Above indicated longevity is based on continuous operation at: 90% survivability, standard voltage
and free air.

■General specification
Fan model code Venturi : PBT-ABS synthetic resins ● Each of the eight flanged ribs has
Materials Used Propeller : PBT-ABS synthetic resins "nut insert" receptacles for the M4
D1225C12B7AZ-00 Bearing : Both side shielded ball bearing nuts (not included) which allow for
D1225C12B9AZ-00 easy attachment.
Motor Brushless DC motor,Protection type : Current shut off
D1225C12BBAZ-00 by detecting lock state,automatically reset
D1225C12BBZP-00
D1225C24B7AZ-00 ■Standard airflow and static ■External dimensions in mm(inches)
D1225C24B9AZ-00 pressure characteristics ● Lead wire type
D1225C24BBAZ-00 （At rated voltage）
D1225C24BBZP-00 65
D1225C□BB
60
D1225C□B9
D1225C□B7 55
Noise [dB]

Features 50

・Surge-less PQ performance 180 45

(increased airflow)
160 40
・Direct rearward, high impetus
airflow (improved cooling) 140 D1225C□BB 35
・2-way vibration reduction (lowers
Pressure [Pa]

120 D1225C□B9
resonant noise of entire device)
D1225C□B7
・Design to improve sound 100
(improved noise) 80
Rotation Airflow
・Sensors Available (lock, pulse)
60 Lead wire spec. AWG26 UL3265
・Variable speed available (PWM) Color (+) Red (-) Black 
40

20
■Mounting Hole dimensions in mm (inches)
0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 [Recommendation]
Airflow（m3 / min）

■ Wiring connection diagram

Power source(+):Red

Sensor output:Yellow

When sensor is installed

Power source(-):Black
Intake side Exhaust side

DC axial fan with sensor

Options (sold separately)
Rated Voltage Model Code ・Guard: F120UL guard
12 V D1225C12BBZP-00 ・Filter: F120 filter
24 V D1225C24BBZP-00

● NIDEC SERVO can meet many of your requirements for customization, such as special connectors, other sensors not listed above, variable speed
specifications, and other modifications. Please contact NIDEC SERVO during your product planning and development stage.
● The listed products are registered in the following overseas standards files, UL/cUL: E48889, TUV: R50004410

www.nidec-servo.com Sensor Spec. G-15 Options G-64, 65

Brushless
DC Fans & Blowers Variable-Speed Fans and Blowers
Fan model code ■ Lineup of PWM variable-speed semi-standard products

Fans & Blowers

D0925C12B8ZP-00
● A PWM signal from the customer equipment is input to the control line (blue) of the fan motor for
D0925C24B8ZP-00 variable-speed operation of fans and blowers. (Input and noisecan be reduced when the internal
D1225C12BBZP-00 temperature of the customer equipment is low, such as during idling.)
D1225C24BBZP-00
D1238B48B7ZP-00 ● Sizes
D1751M48B6ZP-00 Axial fans: □92 mm∼□172 mm
D1751M24B5ZP-00 Blower: □97 mm∼ φ220 mm
D1751S24B9ZP300
D1751S24B6ZP-00 ■ Characteristics for reference
G0938B48B9ZP-00 (The characteristics are typical characteristics and their curves will differ,
G0938B12B8ZP-00 depending on the particular model)
G1238B12BBZP-00 ● Standard values for PWM control signal - speed specification (at rated voltage, open, and normal
G1238B24BBZP-00 temperature and humidity)
6000
G1238B48BBZP-00 I out 1 mA MAX.
V out 5 V MAX.
G1238B24BAZP-00 5000
V L0sat 0.4 MAX.
G1751M24B9ZP300

Axial
Freq. 500 Hz∼5000 Hz
4000

Speed (RPM/min)
G1751M48B9ZP-00
vcc 3000
Blowers
I out 2000

DC fans
E1033L12BFZP-00 V out
Fan
E1033L12BEZP-00 1000
Min setting or stop
E1033H24BAZP-00 (PWM)
Hi Duty 0
E2271Z48B7ZP-00 0 10 20 30 40 50 60 70 80 90 100

Centrifugal
Hi Duty (%)

■ Semi-standard products (Products in regular production)

Max. Airflow Max. Static Pressure Noise Speed min-1 Voltage Spec. V Operating
Size Model Code
m3/min CFM Pa inH2O dB Max. Min. Rating Operating Range Temp. Range ℃
D0925C12B8ZP-00 4450 1000 12 10.2-13.2
□92×25mm 2 71 67 0.27 40 -20 ∼ 60℃
D0925C24B8ZP-00 4450 1750 24 21.6-26.4
D1225C12BBZP-00 12 10.2-13.8
□120×25mm 4.25 150.1 150 0.6 50.5 5400 1000 -20 ∼ 60℃

Silent
D1225C24BBZP-00 24 20.4-27.6
□119×38mm D1238B48B7ZP-00 4.4 155 170 0.68 54 4000 1250 48 40.8-55.2 -20 ∼ 70℃
φ172×150× D1751M48B6ZP-00 10.2 360 315 1.27 64 4800 1000 48 36-60
-20 ∼ 70℃
51mm D1751M24B5ZP-00 9 318 260 1.04 61 4200 1000 24 12-27.6
D1751S24B9ZP300 14.2 501 640 2.57 68 6800 3200 24 16-28
φ172×51mm -20 ∼ 60℃
D1751S24B6ZP-00 10.2 360 335 1.35 59 4800 1000 24 12-27.6
G0938B48B9ZP-00 3.6 127 440 1.77 61 7000 2000 48 36-55.2 -20 ∼ 60℃
□92×38mm
G0938B12B8ZP-00 3.2 113 350 1.41 58 6300 1600 12 8.4-13.8 -20 ∼ 70℃

Axial
G1238B12BBZP-00 12 9.6-13.8
G1238B24BBZP-00 7.4 261 520 2.09 67 6300 1000 24 16.8-27.6 -20 ∼ 60℃
□119×38mm
G1238B48BBZP-00 48 36-55.2
G1238B24BAZP-00 6.3 223 415 1.67 64 5300 1000 24 16.8-27.6 -20 ∼ 70℃
φ172×150× G1751M24B9ZP300 24 16-28
11.2 395 780 3.13 74 6800 3200 -20 ∼ 70℃
51mm G1751M48B9ZP-00 48 36-60
E1033L12BFZP-00 1.55 55 1400 5.63 66 6900 1800 12 10.8-12.6
-20 ∼ 70℃
97×95×33mm E1033L12BEZP-00 1.45 51 1200 4.82 64 6400 1600 12 10.8-13.2
Centrifugal

E1033H24BAZP-00 1.14 40 500 2.01 58 4850 1800 24 16-26.4 -20 ∼ 60℃

φ220×71mm E2271Z48B7ZP-00 18.1 639 600 2.41 74 3200 1000 48 36-57 -20 ∼ 60℃
Option

● Aside from the above models, please see also the high pressure, variable speed G series fans. Details may be found in specs G-31 to G-36.
● The lineup of variable-speed fans and blowers will be expanded regularly. Visit the NIDEC SERVO Website for information on the latest lineup.
● Direct your inquiry to NIDEC SERVO for connector termination to lead wires, for sensor specifications other than those contained in the catalog and for
variable speed specifications. (Products tailored to voltage command control and resistance value command control are also available)
● To ensure correct installation and smooth operation please obtain a drawing for approval or reference drawing from NIDEC SERVO Co.

www.nidec-servo.com 2015 G-51

 Accessories Guards (Options)
F60P Guard (Mass 4 g) F60UL Guard (Mass 12 g) F80UL Guard (Mass 14 g) F92UL Guard (Mass 16 g)
Fans & Blowers

□82.5
5 □71.5
□59 (3.6)
4-φ4.6±0.2 4 (φ17)
2.5 (φ17)
□50

2
φ5

φ 58
φ32

φ10
50
φ3
8
φ76.2 φ89.4

4-φ4.5±0.3
5±0.5
5±0.5
4-φ4.5±0.5 4-φ4.5±0.5
Material: Polycarbonate (black) Material: Mild steel wire 1.6 dia. Material: Mild steel wire 1.6 dia. Material: Mild steel wire 1.6 dia.
UL94V-2 Surface treatment: Surface treatment: Surface treatment:
Nickel chromium plating Nickel chromium plating Nickel chromium plating

F120UL Guard (Mass 29 g) F127UL Guard GUARD 172 F180UL Guard

(9) 4-R3±0.4
4-φ4.6 ±0.5 6
□104.8±0.5 5.9±0.5 2-φ4.8 ±0.8 (Inner dimension)
□113.3±0.5 6
Axial

7
(φ17)

0.
7±
φ11.2

2.
15
φ148.6
DC fans

161
φ30
φ115.6
φ45
5±0.5
φ176
Centrifugal

4-φ4.5±0.5

Material: Mild steel wire 1.6 dia. Material: Mild steel wire 1.6 dia. Material: Mild steel wire 2 dia. Material: Mild steel wire 1.6 dia.
Surface treatment: Surface treatment: Surface treatment: Surface treatment:
Nickel chromium plating Nickel chromium plating Nickel chromium plating Nickel chromium plating

F200UL Guard (Mass 82 g)

2
5+

List of mating fan series

17

(Inner dimension)
φ
Silent

F60 F80 F92 F120 F127 GUARD F180 F200

9 +2 Guard F60P SCN
φ1 UL UL UL UL UL 172 UL UL

○*1 ○*2
4.3 -0.2
+0.4

SCN
○
(182.3)

VE
AC Axial Fans

1.5 WE ○
KA ○
○
φ
(Mo 188.4 CU
u
φ nting p
19
5.
itch
) CN ○
8 +1
- 1 .5 MA ○
○
AC fans

4.7 PA
Axial

Material: Mild steel wire 1.6 dia. TUDC ○ ○

Surface treatment: PUDC ○
Nickel chromium plating
D0925C ○
KLDC ○
D1225C ○
SCN Guard (Mass 55 g) CNDC ○
DC Axial Fans

D1238B ○
φ126
D1338B ○
○
Centrifugal

φ29 D1751M
D1751S ○
G0638D ○
φ138

G0838X ○
G0938B ○
G1238B ○
G1751M ○
43.5
*1: Can be installed only on outlet side. *2: Can be installed only on intake side.
Material: Mild steel wire 1.6 dia. All guards conform to the UL standard when combined with NIDEC SERVO fans.
Surface treatment: The installation of a filter, guard and other accessories will constitute a ventilating load,
Option

Nickel chromium plating reducing the airflow.Select a suitable guard, taking into consideration the increase in air
resistance. (See Figs. 12 and 13 on page G-7.)

・Guard special for intake side of

SCN (metal venturi) fans.

G-64 www.nidec-servo.com 2008/2009_A

 Accessories Filters and Other Accessories (Options)
■ Filter List of mating fan series

Fans & Blowers

3-piece set Guard (PPO resin UL94V-0) Filter F80 F92 F120 Filter F80 F92 F120
PUDC ○ VE ○

AC Axial Fans
Media (Polyurethane foam)
Axial fan D0925C ○ WE ○
Retainer KLDC ○ KA ○

DC Axial Fans
(PPO resin UL94V-0)
D1225C ○ CU ○
CNDC ○ CN ○
D1238B ○
G0838C ○
G0938B ○
Note: Two retainer pins are G1238B ○
provided on the F80 filter.
4-D

Component (Model Code) H T M／C D

F80 Filter 83.5 10 71.4 φ 4.5
M/C
(H)

(H)

H
F92 Filter 96.5 11 82.6 φ 3.8
F120 Filter 123.7 11 104.8 φ 4.4
T

Axial
(T)

(T)

■ Flange spacer

DC fans
D
A B

Centrifugal
C

A B C D E
Component (Model Code) Mating Model Code
mm mm mm mm mm Insert a flange spacer into
Flange Spacer PUDC（※） 5 8 2 17 14.5 KUDC,PUDC the ribs of a venturi.

Flange SpacerCNDC 8 11 3.5 28 19.8 CNDC

(Installing a flange spacer)
※Ribbed venturis (PUDC-R) are available for PUDC

Silent
■ Inlet ring
21±1
118 45ﾟ
(0.8)
8
0.

4×φ4.3 ±0.5
±

(R
5

22
24

)
φ

AC fans
Axial
φ155 ±0.8

φ252

4×90ﾟ
φ242 ±0.8

Centrifugal

6×
6×φ5.5 ±0.5 60
°
Through hole

Material: Galvanized steel sheet

Component
Mating Model Code
(Model Code)
E2271 Inlet ring E2271Z
Option

www.nidec-servo.com 2008/2009_B G-65

 AC & DC Fans &
Blowers with Sensors Technical Data

DC axial fans & blowers with sensors

Fans & Blowers

● Specification: VCE = 28 V max ● Output waveform
(55.2 V max for 48 V products)
The DC fans and blowers of NIDEC SERVO have a function to send an IC = 5 mA max Normal speed
alarm signal when the fan motor revolutions slow down. Several systems Startup
Reset speed
(VCE (SAT) = 0.4 V max at 5 mA) Detection speed
are used to cut off the system power supply by this alarm signal, with three
types of sensors available. Select the right type of sensor in accordance with Fan
Ic = 5 mA max. High
the purpose of use. The lead wire for the sensor is yellow. The output type is Low
Yellow 0V
an open collector output for all three types. R +28 V max. 2 s or less
or 5 s or less

Sensor output
■ Sensor type

1. Lock detection type (Product code: S)

Note: The output waveform for type SQ (R) will be reversed.
The speed setting for the alarm output is about half the rated speed.
The output signal indicates an [L] state (transistor is ON) while the
For more detailed information, please request a product delivery specification
propeller is rotating, changing to an [H] state (transistor is OFF) less than
from NIDEC SERVO.
five seconds after the propeller stops rotating. The propeller automatically
restarts operation within five seconds when the lock is unlocked. ([H] → [L]

Axial
5 s). If the pull-up voltage is live, the [H] state (transistor is OFF) will engage
in less than five seconds, even when the power is turned off.

DC fans
● Specification: VCE = 28 V max ● Output waveform
(55.2 V max for 48 V products)
Locked Unlocked
IC = 5 mA max
When the blades
When the blades are turning
(VCE (SAT) = 0.4 V max) are turning

Centrifugal
5 s or less 5 s or less
1 s or less
VH
Fan
Ic = 5 mA max.

Yellow
R +28 V max.
VL
0V
Sensor output sec.

※When the power is turned on, the state sometimes

becomes high [H] for several hundred ms.

2. Pulse output type (Product code: P)

Silent
A rectangular wave of two pulses will be output for each turn of the
propeller while the propeller is rotating, outputting two types of signal
depending on the propeller position when the propeller is locked. (See the
note below ※)

● Specification: VCE = 28 V max ● Output waveform

(55.2 V max for 48 V products)
IC = 5 mA max

AC fans
Axial
(VCE (SAT) = 0.4 V max) VH

Fan
Ic = 5 mA max.
VL
0V
Yellow T1 T2 T3 T4
R +28 V max.
sec.
T0
（1 turn）
Sensor output T1∼T4 ≒ 1/4 T0 = 60/4 N (sec.)

※Output signal waveform when the fan is stopped: The following

two types of waveform are output, depending on the blade position
when the propeller is stopped:
Centrifugal

Pulse outputs of High - constant or restart timing (0.05 Hz to 2 Hz).

3. Speed detection type (Product code: Q)

The output signal indicates the [H] state when the propeller revolutions are
slower than the preset speed, changing to the [L] state when the propeller
revolutions exceed the reset speed.
[Products with a reversed output waveform are also available, suitable for a
wired OR connection when several fans are installed. Contact NIDEC
SERVO for further information. {Former code: SQ, new code (15 - digit code
Option

products): R} ]

www.nidec-servo.com 2008/2009_A G-15