Scribd
Upload
241 views

API 682 Accumulator Data Sheet

The document contains specifications for three accumulator types used in API 682 Plan 53B sealant systems. The accumulators range in nominal capacity from 20 to 50 liters and are designed to pressures between 48-80 kg/cm2G. They are constructed of materials suitable for temperatures between -22 to 355 degrees C and manufactured according to ASME Section VIII standards. Each accumulator listing includes design details such as material grades, connections, certifications and quantity required.

Uploaded by

Bhyrappa
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
241 views

API 682 Accumulator Data Sheet

The document contains specifications for three accumulator types used in API 682 Plan 53B sealant systems. The accumulators range in nominal capacity from 20 to 50 liters and are designed to pressures between 48-80 kg/cm2G. They are constructed of materials suitable for temperatures between -22 to 355 degrees C and manufactured according to ASME Section VIII standards. Each accumulator listing includes design details such as material grades, connections, certifications and quantity required.

Uploaded by

Bhyrappa
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Application : Accumulator for API 682 Plan 53B Sealant Systems

Instrument Code xxxxxxxx xxxxxxxx xxxxxxxx


Accumulator Type Bladder Bladder Bladder
Design Code ASME VIII U-Stamp ASME VIII U-Stamp ASME VIII U-Stamp
Nominal Capacity 20 35 50
Capacity Unit Liter Liter Liter
Anc Fluid name Water / ISO VG 10 Water / ISO VG 10 Water / ISO VG 10
Design Pressure 48 50 80
Minimum Operating Pressure 8 bar 6 44.5
Pressure Units kg/cm²G kg/cm²G kg/cm²G
Design Temperature 200 355 130
MDMT 1 -22 1
Bladder Design Temperature 100 100 100
Bladder Design Min Temperature 0 0 0
Temperature Units C C C
Bladder Material Nitrile (NBR) Nitrile (NBR) Nitrile (NBR)
Shell Material AISI 316/L AISI 316/L AISI 316/L
Process Connection material AISI 316/L AISI 316/L AISI 316/L
Nitrogren Connection GAS BSPP M GAS BSPP M GAS BSPP M
Nitrogren Connection Size 0.25in 0.25in 0.25in
Process Connection Flanged Flanged Flanged
Process Connection Size 3/4" 3/4" 3/4"
Rating ANSI 600 ANSI 600 ANSI 600
Flange Finish RF 125/250 AARH RF 125/250 AARH RF 125/250 AARH
Accumulator Assembly Vertical Vertical Vertical
Accumulator/Dampener Mounting MOUNTING: 1COLLAR AND 1BRACKET MOUNTING: 2 Collars 1 Bracket MOUNTING: 2 Collars 1 Bracket
Vendor AS PER AVL AS PER AVL AS PER AVL
Vendor Part Number TBA TBA TBA
QSCert-Conformity Cert Yes Yes Yes
Design Code ASME Sect.VIII Div.1 ASME Sect.VIII Div.1 ASME Sect.VIII Div.1
PMI Certificate Yes Yes Yes
Ferrite Test Yes Yes Yes
X-RAY Full Full RT1 Full RT1 Full RT1
Dye Penetrant Yes Yes Yes
Seal Test Certificate HYDROSTATIC Test HYDROSTATIC Test HYDROSTATIC Test
NACE MR 0-103 Yes Yes Yes
Origin Certificate Yes Yes Yes
Maint/Inspect Data Book Yes Yes Yes
Mechanical Calculation Yes Yes Yes
Material Certificate Material Cert (EN 10204 3.1) Material Cert (EN 10204 3.1) Material Cert (EN 10204 3.1)
Total quantity on Accumulators 31 nos 43 nos TBA
Note1 HYDROTEST PRESSURE: 75 kg/cm2 HYDROTEST PRESSURE: 92 kg/cm2 HYDROTEST PRESSURE: 120 kg/cm2
Note2 REFER PO TEXT REFER BELOW NOTES REFER BELOW NOTES
Note3 : NITROGEN CHARGING BLOCK AS PER BELOW
Charging Block Connections Suitable for 1/2" Thermowell with U length of 65mm
1/2" NPT/F on top Qty 1
1/4" NPT/F on front (plugged) Qty 1
1/4" BSPP/F for Gas Valve Qty 1

You might also like