Scribd
Upload
493 views

KCC DATASHEET Technical Data Sheet Thinner-002 Eng

Thinner 002 is a solvent thinner recommended for use with alkyd-based paints. It has a clear color, 0% solids by volume, specific gravity of 0.87, and VOC of 870g/L. Users should avoid contact, keep away from ignition sources, and use in a well-ventilated area. In case of exposure, flush immediately with water and seek medical attention.

Uploaded by

Isabelo Abao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
493 views

KCC DATASHEET Technical Data Sheet Thinner-002 Eng

Thinner 002 is a solvent thinner recommended for use with alkyd-based paints. It has a clear color, 0% solids by volume, specific gravity of 0.87, and VOC of 870g/L. Users should avoid contact, keep away from ignition sources, and use in a well-ventilated area. In case of exposure, flush immediately with water and seek medical attention.

Uploaded by

Isabelo Abao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

Thinner 002

Product Description Solvent thinner

Packing Container (4Litre, 18Litre, 20Litre, 200Litre)

Recommended Use Thinner for Alkyd based paints

Physical Properties

Finish and Color Clear


Solids by Volume 0%
Specific Gravity Approx. 0.87
VOC 870g/L
Flash Point 15℃/ 59℉ (Closed cup)

Handling, Storage and Safety Information

Handling and Storage PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING


Avoid contact with eyes, skin, and clothing. Keep out of the reach of children. Protect against
physical damage. Use with adequate ventilation.
Worker must wear air-purifying respirator, safety goggoles, protective clothing and gloves to
prevent contact with this material. Keep container tightly closed.
Flammable liquid and vapor. May cause flash fire.
Keep away from all ignition sources such as heat, open flame, spark.
Store away from incompatible substances(oxidizing materials, acid or base). Keep container cool.
Avoid prolonged breathing of vapors and mists. Use spark resistant tools.
Approved air supplied type respirator should be used in confined spaces, especially such as
inside of tank. Wash thoroughly after handling.
When electrostatic coating is required, please wear electric resistant shoes or protective equipment.

Safety FIRST AID MEASURES:


INHALATION: Remove from exposure area to fresh air immediately. Perform artificial respiration
if necessary. Keep person warm and at rest. Get medical attention immediately.
EYES : Wash eyes immediately with large amounts of water occasionally lifting upper and
lower lids, until no evidence of chemical remains(at least 15 ~ 20 minutes).
Get medical attention immediately.
SKIN : Remove contaminated clothing and shoes immediately. Launder before re-use.
Wash affected area thoroughly with soap and water until no evidence of chemical remains
(at least 15 ~ 20 minutes). Get medical attention immediately.
SWALLOW : Extreme care must be used to prevent aspiration. Do not induce vomiting.
Get medical attention immediately.

Issued October 2009

Disclaimer : The information in this data sheet is believed to the best of our knowledge based on laboratory test and practical experience.
However, there are many factors affecting the performance of product and the product quality itself, so we are not able to guarantee
KCC Corporation
without the confirmation of the purpose of using the product from us in writing. We reserve the right to change the data without notice and
you should check that this data sheet is current prior to using the product.

You might also like