Scribd
Upload
54 views

Classification of Fluid Flows: Viscous Versus Inviscid Regions of Flow

This document classifies different types of fluid flows based on various characteristics. It discusses viscous versus inviscid flows, internal versus external flows, compressible versus incompressible flows, laminar versus turbulent flows, natural versus forced flows, steady versus unsteady flows, and one-, two-, and three-dimensional flows. Key examples are provided to illustrate each classification.

Uploaded by

chandan Vishvakarma
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
54 views

Classification of Fluid Flows: Viscous Versus Inviscid Regions of Flow

This document classifies different types of fluid flows based on various characteristics. It discusses viscous versus inviscid flows, internal versus external flows, compressible versus incompressible flows, laminar versus turbulent flows, natural versus forced flows, steady versus unsteady flows, and one-, two-, and three-dimensional flows. Key examples are provided to illustrate each classification.

Uploaded by

chandan Vishvakarma
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

CLASSIFICATION OF FLUID FLOWS

Viscous versus Inviscid Regions of Flow

Viscous flows: Flows in which the frictional effects are significant.


Inviscid flow regions: In many flows of practical interest, there are regions
(typically regions not close to solid surfaces) where viscous forces are negligibly
small compared to inertial or pressure forces.

The flow of an originally uniform fluid


stream over a flat plate, and the regions of
viscous flow (next to the plate on both
sides) and inviscid flow (away from the
plate).

17
Internal versus External Flow
External flow: The flow of an unbounded fluid over a surface such as a plate, a
wire, or a pipe.
Internal flow: The flow in a pipe or duct if the fluid is completely bounded by solid
surfaces.

• Water flow in a pipe is internal flow,


and airflow over a ball is external flow
.
• The flow of liquids in a duct is called
open-channel flow if the duct is only
partially filled with the liquid and there
is a free surface.

External flow over a tennis ball, and the


turbulent wake region behind. 18
Compressible versus Incompressible Flow

Incompressible flow: If the density of flowing fluid


remains nearly constant throughout (e.g., liquid flow).
Compressible flow: If the density of fluid changes
during flow (e.g., high-speed gas flow)

When analyzing rockets, spacecraft, and other systems


that involve high-speed gas flows, the flow speed is
often expressed by Mach number

Schlieren image of the spherical shock


wave produced by a bursting balloon at
Ma = 1 Sonic flow the Penn State Gas Dynamics Lab.
Ma < 1 Subsonic flow Several secondary shocks are seen in
Ma > 1 Supersonic flow the air surrounding the balloon.
Ma >> 1 Hypersonic flow
19
Laminar versus Turbulent Flow

Laminar flow: The highly ordered fluid motion characterized by smooth layers of fluid. The flow of high-viscosity
fluids such as oils at low velocities is typically laminar.

Turbulent flow: The highly disordered fluid motion that typically occurs at high velocities and is characterized
by velocity fluctuations. The flow of low-viscosity fluids such as air at high velocities is typically turbulent.

Transitional flow: A flow that alternates between being laminar and turbulent.

20
Laminar, transitional, and turbulent flows over a flat plate.
Natural (or Unforced) versus Forced Flow

Forced flow: A fluid is forced to flow over a

surface or in a pipe by external means such as a

pump or a fan.

Natural flow: Fluid motion is due to natural

means such as the buoyancy effect, which

manifests itself as the rise of warmer (and thus


Schlieren image showing the thermal plume
produced by Professor Cimbala as he
lighter) fluid and the fall of cooler (and thus welcomes you to the fascinating world of
fluid mechanics.
denser) fluid.

21
Steady versus Unsteady Flow

• The term steady implies no change at a point with


time.
• The opposite of steady is unsteady.
• The term uniform implies no change with location
over a specified region.
• The term periodic refers to the kind of unsteady flow
in which the flow oscillates about a steady mean.
• Many devices such as turbines, compressors, boilers,
condensers, and heat exchangers operate for long
periods of time under the same conditions, and they
are classified as steady-flow devices.

Oscillating wake of a blunt-based airfoil at Mach number


0.6. Photo (a) is an instantaneous image, while photo (b)
is a long-exposure (time-averaged) image.

22
Comparison of (a) instantaneous snapshot of an unsteady
flow, and (b) long exposure picture of the same flow. 23
One-, Two-, and Three-Dimensional Flows

• A flow field is best characterized by its velocity distribution.


• A flow is said to be one-, two-, or three-dimensional if the flow
velocity varies in one, two, or three dimensions, respectively.
• However, the variation of velocity in certain directions can be
Flow over a car antenna is approximately
small relative to the variation in other directions and can be two-dimensional except near the top and
ignored. bottom of the antenna.

The development of the velocity profile in a circular pipe. V = V(r, z) and thus the flow is two-dimensional in the
entrance region, and becomes one-dimensional downstream when the velocity profile fully develops and remains
unchanged in the flow direction, V = V(r). 24

You might also like