Scribd
Upload
80 views

Self-Priming Liquid Ring Pumps: With Double Anti-Seize Frontal Inserts

This document summarizes the specifications and performance of CKR self-priming liquid ring pumps. The pumps can handle flows up to 50 l/min and heads up to 51 m. They are suitable for clean water and liquids that are not chemically aggressive. As self-priming pumps, they are well-suited for applications where priming is needed or flow is irregular. Installation should be in a protected indoor space. The pumps meet European safety and performance standards.

Uploaded by

cristian villegas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
80 views

Self-Priming Liquid Ring Pumps: With Double Anti-Seize Frontal Inserts

This document summarizes the specifications and performance of CKR self-priming liquid ring pumps. The pumps can handle flows up to 50 l/min and heads up to 51 m. They are suitable for clean water and liquids that are not chemically aggressive. As self-priming pumps, they are well-suited for applications where priming is needed or flow is irregular. Installation should be in a protected indoor space. The pumps meet European safety and performance standards.

Uploaded by

cristian villegas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

CKR

Self-priming liquid ring pumps


Clean water
➠ With double anti-seize frontal inserts
Civil use

Industrial use

Agricultural use

PERFORMANCE RANGE INSTALLATION AND USE


• Flow rate up to 50 l/min (3 m³/h) Suitable for use with clean water that does not contain abrasive
• Head up to 51 m particles and with liquids that are not chemically aggressive
towards the materials from which the pump is made.
Because of a specific principle of their operating performance
APPLICATION LIMITS these pumps are an excellent solution in every case where a
• Manometric suction lift up to 9 m (HS) compact self-priming pump is required or when the fluid flow is
• Liquid temperature between -10 °C and +90 °C irregular or contains air.
• Ambient temperature up to +40 °C Installation needs to be undertaken in well ventilated closed areas
• Max. working pressure 6 bar or anyway protected from bad weather.
• Continuous service S1
PATENTS - TRADE MARKS - MODELS
CONSTRUCTION AND SAFETY STANDARDS
• Motor bracket: patent n. IT1243605
• Registered EU Design n. 342159-0008
EN 60335-1 EN 60034-1
IEC 60335-1 IEC 60034-1
CEI 61-150 CEI 2-3
OPTIONS AVAILABLE ON REQUEST
• Special mechanical seal
CERTIFICATIONS • Other voltages
Company with management system certified DNV
• IP X5 class protection
ISO 9001: QUALITY

50
26 Hz  | CKR 
CHARACTERISTIC CURVES AND PERFORMANCE DATA 50 Hz  n= 2900 min-1  HS= 0 m

CKR90
CKR80
Head H (metres) 4

Flow rate Q 4

MODEL POWER (P2) m³/h 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 3.0
Q
Single-phase Three-phase kW HP  l/min 0 5 10 15 20 25 30 35 40 50

CKRm 80 CKR 80 0.55 0.75 48 46 42 38 34 30 26 22 18 10


IE3 H metres
CKRm 90 CKR 90 0.75 1 51 49 45 41 37 33 29 25 21 13

Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3B.

 Three-phase motor efficiency class (IEC 60034-30-1)

STANDARD INSTALLATION

HS = Suction height

Non-return valve

CKR  |  50 Hz
27
CKR
POS. COMPONENT CONSTRUCTION CHARACTERISTICS

1 PUMP BODY Cast iron with stainless steel insert to prevent impeller seizure due to the formation of rust . The pump
body is complete with threaded ports in compliance with ISO 228/1

2 MOTOR BRACKET Aluminium with brass insert (patented), reduces the risk of impeller seizure

3 IMPELLER Brass star type with open radial vanes

4 MOTOR SHAFT Stainless steel AISI 431

5 MECHANICAL SEAL Seal Shaft Materials


Model Diameter Stationary ring Rotational ring Elastomer
AR-12V Ø 12 mm Ceramic Graphite Viton

6 BEARINGS 6203 ZZ / 6203 ZZ

7 CAPACITOR Pump Capacitance


Single-phase (230 V or 240 V) (110 V)
CKRm 80 16 μF - 450 VL 60 μF - 300 VL
CKRm 90 20 μF - 450 VL 60 μF - 300 VL

8 ELECTRIC MOTOR CKRm: single-phase 230 V - 50 Hz with thermal overload protector incorporated into the winding.
CKR: three-phase 230/400 V - 50 Hz.
➠ The three-phase pumps are fitted with high performance motors in class IE3 (IEC 60034-30-1)
– Insulation: class F  
– Protection: IP X4

6 7 6

1 3 2 5 4 8

50
28 Hz  | CKR 
DIMENSIONS AND WEIGHT

f i
DN2

h2
DN1
h3

h
h1
s n2
a w m n1

MODEL PORTS DIMENSIONS mm kg


Single-phase Three-phase DN1 DN2 a f h h1 h2 h3 i m n1 n2 w s 1~ 3~

CKRm 80 CKR 80 10.9 10.9


1" 1" 50 296 180 136 31 167 81 90 140 112 77 7
CKRm 90 CKR 90 10.8 10.8

ABSORPTION

MODEL VOLTAGE MODEL VOLTAGE


Single-phase 230 V 240 V 110 V Three-phase 230 V 400 V 690 V 240 V 415 V 720 V

CKRm 80 5.0 A 4.8 A 10.0 A CKR 80 3.5 A 2.0 A 1.2 A 3.3 A 1.9 A 1.1 A

CKRm 90 5.1 A 4.9 A 10.2 A CKR 90 3.6 A 2.1 A 1.2 A 3.5 A 2.0 A 1.2 A

CKR  |  50 Hz
29

You might also like