Scribd
Upload
126 views

Wellcome To Our Presentation

This document presents a project proposal for a smart garden system. The system would use sensors to monitor soil moisture and automatically water plants using a pump and motor when needed. It would be controlled by an ESP8266 microcontroller connected to the internet using WiFi. The system aims to automate garden irrigation to make it more efficient and require less human supervision. It would help people grow vegetables and flowers with minimal effort. The total estimated cost of components for the system is 1770 Tk. The goals are to increase garden productivity, provide homegrown vegetables, save resources, and help the environment.

Uploaded by

nordianashahuddin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
126 views

Wellcome To Our Presentation

This document presents a project proposal for a smart garden system. The system would use sensors to monitor soil moisture and automatically water plants using a pump and motor when needed. It would be controlled by an ESP8266 microcontroller connected to the internet using WiFi. The system aims to automate garden irrigation to make it more efficient and require less human supervision. It would help people grow vegetables and flowers with minimal effort. The total estimated cost of components for the system is 1770 Tk. The goals are to increase garden productivity, provide homegrown vegetables, save resources, and help the environment.

Uploaded by

nordianashahuddin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

WELLCOME TO OUR

PRESENTATION
project TITLE:
smart garden
 What is SMART GARDEN ?
 Smart Garden: A vegetable or herb garden that is
controlled by computer. Although farming and gardening have
been enhanced with computers and electronic devices for decades,
the smart garden often refers to small, indoor units that by various
means determine when to alert the user to add nutrients. Smart
gardens may also manage their own lighting.
CONTENTS
 Introduction
 Project mission
 Project objectives
 Tag Line
 Watering System
 System Requirements
 Cost Estimate
 Possible Outcomes
Introduction
 Automation the process of monitoring the garden can
transform garden irrigation process from being manual and
static to smart and dynamic one.
 This leads to higher comfortability, water using efficiency and
less human supervision effort. This paper proposes a cloud
based Internet of Things (IoT) smart garden monitoring and
irrigation system using Arduino Uno. The watering
requirement for a plant can be adjusted by monitoring the soil
moisture.
 Measuring the soil moisture of the plant gives information if
the plant is ideally watered, over watered or under waterds
PROJECT MISSION

 To establish a product to help the urban families grow


vegetables and flowers for daily use in their backyard, rooftop
or even inside the house and taking good care of plants even
in their absence
PROJECT OBJECTIVES

 Customer satisfaction through the good quality of products.


 Turn in profits from the first year of operations.
 The creation of unique, innovative products that will make it
bestselling
TAG LINE

GO GREEN ,SAVE EARTH


WATERING SYSTEM
START

Soil YES
Sensor
was wet

NO

Is it YES
going to
rain

NO

Water Full END


SYSTEM REQIREMENTS

 ESP 8266-12E:
ESP-12E is a miniature Wi-Fi
module present in the market and is used
for establishing a wireless network
connection for microcontroller or
processor.
 USB Data Cable:
A data cable is any media that allows
baseband transmissions (binary 1,0s) from
a transmitter to a receiver
 Water Pump Motor(DC6-12V R385 motor):
 The pump can handle pumping heated liquids
up to a temperature of 80°C and when suitably
powered can suck water through the tube from
up to 2m and pump water vertically for up to
3m.
 Motor Driver(L-298):
 High operating voltage, which can be up to 40 volts
 Large output current, the instantaneous peak current
can be up to 3A
 With 25W rated power
 Ableto drive a two-phase stepper motor or four-
phase stepper motor, and two-phase DC motors
 Drive voltage: 5-35V; logic voltage: 5V
 Soil Moisture Sensor:
 Reflected microwave radiation is affected by the soil
moisture and is used for remote sensing in hydrology
and agriculture. Portable probe instruments can be
used by farmers or gardeners. Soil moisture
sensors typically refer to sensors that estimate
volumetric water content.

 12-V power source(LIPO-Battery):


 Its used for supplied electricity on the breadboard

 LED(Bulb):
 Used for showing the input ,output ,and switch on/off
signal
 Bread Board:
A breadboard is a solderless device for temporary
prototype with electronics and test circuit designs. Most
electronic components in electronic circuits can be
interconnected by inserting their leads or terminals into the
holes and then making connections through wires where
appropriate.

 Jump Wire:
A jump wire is an electrical wire or group of them in a
cable with a connector or pin at each end. Wires are used
to connect components to each other on the breadboard
or other prototype, internally or with other equipment or
components, without soldering.
Cost EASTIMATE
EQUPMENTS PRICE(Tk)
ESP8266-12E 500

USB Data Cable 50

DC6-12V R385 Water Pump Motor 650

L 298 Motor Driver 190

LED 20

Soil Moisture Sensor 200

12V power Source(LIPO-Battery) 70 (2p)

Bread Board 50

Jump Wire 40(20p)

Total 1770 tk
POSSIBLE OUTCOMES

 Reduce cost & power consumption


 Increase garden productivity
 Provide healthy vegetables at home
 To save the environment
THANK YOU!

You might also like