Scribd
Upload
100 views

Cb/Iso&Esw Interlock: Totally Integrated Automation Portal

The document describes an interlocking system for a gas processing plant. It contains logic diagrams showing the interconnections between circuit breakers, disconnectors, and control signals. Boolean logic gates like AND and OR are used to control enabling and disabling of devices based on their position and status signals.

Uploaded by

Nitin Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100 views

Cb/Iso&Esw Interlock: Totally Integrated Automation Portal

The document describes an interlocking system for a gas processing plant. It contains logic diagrams showing the interconnections between circuit breakers, disconnectors, and control signals. Boolean logic gates like AND and OR are used to control enabling and disabling of devices based on their position and status signals.

Uploaded by

Nitin Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Totally Integrated

Automation Portal

CB/ISO&ESW INTERLOCK
and10_15

AND10
AND
User Defined Signals.GD1 GAS PR 2ST STG AL [BOOL] X1 Y
User Defined Signals.GD2 GAS PR 2ST STG AL [BOOL] X2
User Defined Signals.GD3 GAS PR 2ST STG AL [BOOL] X3
User Defined Signals.GD8 GAS PR 2ST STG AL [BOOL] X4
Totally Integrated

User Defined Signals.GD9 GAS PR 2ST STG AL [BOOL] X5


Automation Portal

User Defined Signals.GD1 GAS PR 3ST STG AL [BOOL] X6


User Defined Signals.GD2 GAS PR 3ST STG AL [BOOL] X7
User Defined Signals.GD3 GAS PR 3ST STG AL [BOOL] X8
User Defined Signals.GD8 GAS PR 3RD STG AL [BOOL] X9 and10_16
User Defined Signals.GD9 GAS PR 3RD STG AL [BOOL] X10 AND10
AND
X1 Y ISO_89A.Interlocking.>Enable closing [BOOL]
X2
ISO_89A.Disconnector.Position.open [BOOL] X3

and10_1

AND10
AND
CB.Circuit break..Position.open [BOOL] X1 Y
ISO_89B.Disconnector.Position.open [BOOL] X2
ESW_89AE.Disconnector.Position.open [BOOL] X3
User Defined Signals.M1 ESA OPEN [BOOL] X4 or10_1
User Defined Signals.LCC IN REMOTE [BOOL] X5 OR10
User Defined Signals.N/M SWT IN NRML MODE [BOOL] X6 OR
X1 Y
CB/ISO&ESW INTERLOCK - Data flow/Task: Interlocking (1.1 / 3.2)

X2

and10_2

AND10
AND
ESW_89AE.Disconnector.Position.open [BOOL] X1 Y
User Defined Signals.M1 ESA OPEN [BOOL] X2
User Defined Signals.LCC IN REMOTE [BOOL] X3
CB.Circuit break..Position.closed [BOOL] X4
ISO_89B.Disconnector.Position.closed [BOOL] X5

2.1 ( Page1 - 4)
User Defined Signals.N/M SWT IN NRML MODE [BOOL] X6
User Defined Signals.66KV B/C CLOSED [BOOL] X7 and10_17

AND10
AND
X1 Y ISO_89A.Interlocking.>Enable opening [BOOL]
User Defined Signals.GD2 GAS PR 2ST STG AL [BOOL] X2
User Defined Signals.GD2 GAS PR 3ST STG AL [BOOL] X3
ISO_89A.Disconnector.Position.closed [BOOL] X4

1.2 ( Page1 - 3)
1.1 ( Page1 - 2)

and10_5

AND10
AND
Totally Integrated
Automation Portal

ESW_89CE.Disconnector.Position.open [BOOL] X1 Y ISO_89C.Interlocking.>Enable closing [BOOL]


CB.Circuit break..Position.open [BOOL] X2 ISO_89C.Interlocking.>Enable opening [BOOL]
ESW_89_EST.Disconnector.Position.open [BOOL] X3
User Defined Signals.LCC IN REMOTE [BOOL] X4
User Defined Signals.N/M SWT IN NRML MODE [BOOL] X5
User Defined Signals.GD4 GAS PR 2ST STG AL [BOOL] X6
User Defined Signals.GD4 GAS PR 3ST STG AL [BOOL] X7
User Defined Signals.GD5 GAS PR 2ST STG AL [BOOL] X8
User Defined Signals.GD6 GAS PR 2ND STG AL [BOOL] X9

and10_8

AND10
AND
ISO_89C.Disconnector.Position.open [BOOL] X1 Y ESW_89_EST.Interlocking.>Enable closing [BOOL]
User Defined Signals.N/M SWT IN NRML MODE [BOOL] X2 ESW_89_EST.Interlocking.>Enable opening [BOOL]
CB/ISO&ESW INTERLOCK - Data flow/Task: Interlocking (1.2 / 3.2)

User Defined Signals.LCC IN REMOTE [BOOL] X3

2.2 ( Page1 - 5)
and10_14

AND10
AND
Totally Integrated

User Defined Signals.LCC IN REMOTE [BOOL] X1 Y CB.Interlocking.>Enable opening [BOOL]


Automation Portal

User Defined Signals.N/M SWT IN NRML MODE [BOOL] X2


User Defined Signals.GD1 GAS PR 2ST STG AL [BOOL] X3
User Defined Signals.GD1 GAS PR 3ST STG AL [BOOL] X4
CB.Circuit break..Position.closed [BOOL] X5

and10_10

AND10
AND
CB.Circuit break..Position.open [BOOL] X1 Y CB.Interlocking.>Enable closing [BOOL]
X2

and10_9

AND10
AND
User Defined Signals.CB SPR DISCHARGED [BOOL] X1 Y
User Defined Signals.N/M SWT IN NRML MODE [BOOL] X2
User Defined Signals.LCC IN REMOTE [BOOL] X3
User Defined Signals.GD1 GAS PR 2ST STG AL [BOOL] X4
User Defined Signals.86.1 RELAY OPTD [BOOL] X5
User Defined Signals.86.2 RELAY OPTD [BOOL] X6
CB/ISO&ESW INTERLOCK - Data flow/Task: Interlocking (2.1 / 3.2)

User Defined Signals.96 RELAY OPTD [BOOL] X7


X8
X9
User Defined Signals.GD1 GAS PR 3ST STG AL [BOOL] X10

or10_3

OR10
OR
User Defined Signals.TC-1 FAULTY [BOOL] X1 Y

3.1 ( Page1 - 6)
1.1 ( Page1 - 2)

User Defined Signals.TC-2 FAULTY [BOOL] X2

and10_6

AND10
AND or10_4
ISO_89A.Disconnector.Position.open [BOOL] X1 Y OR10
ISO_89B.Disconnector.Position.closed [BOOL] X2 OR
ISO_89C.Disconnector.Position.closed [BOOL] X3 X1 Y
X2

and10_7

AND10
AND
ISO_89A.Disconnector.Position.closed [BOOL] X1 Y
ISO_89B.Disconnector.Position.open [BOOL] X2
ISO_89C.Disconnector.Position.closed [BOOL] X3

2.2 ( Page1 - 5)
2.1 ( Page1 - 4)

and10_11

AND10
AND
User Defined Signals.GD1 GAS PR 2ST STG AL [BOOL] X1 Y
User Defined Signals.GD2 GAS PR 2ST STG AL [BOOL] X2
Totally Integrated
Automation Portal

User Defined Signals.GD3 GAS PR 2ST STG AL [BOOL] X3


User Defined Signals.GD8 GAS PR 2ST STG AL [BOOL] X4
User Defined Signals.GD9 GAS PR 2ST STG AL [BOOL] X5
User Defined Signals.GD1 GAS PR 3ST STG AL [BOOL] X6
User Defined Signals.GD2 GAS PR 3ST STG AL [BOOL] X7
User Defined Signals.GD3 GAS PR 3ST STG AL [BOOL] X8
User Defined Signals.GD8 GAS PR 3RD STG AL [BOOL] X9 and10_12
User Defined Signals.GD9 GAS PR 3RD STG AL [BOOL] X10 AND10
AND
X1 Y ISO_89B.Interlocking.>Enable closing [BOOL]
ISO_89B.Disconnector.Position.open [BOOL] X2
X3

and10_3

AND10
AND
CB.Circuit break..Position.open [BOOL] X1 Y
ISO_89A.Disconnector.Position.open [BOOL] X2
ESW_89AE.Disconnector.Position.open [BOOL] X3
User Defined Signals.M2 ESB OPEN [BOOL] X4
User Defined Signals.LCC IN REMOTE [BOOL] X5
User Defined Signals.N/M SWT IN NRML MODE [BOOL] X6 or10_2
CB/ISO&ESW INTERLOCK - Data flow/Task: Interlocking (2.2 / 3.2)

OR10
OR
X1 Y
and10_4 X2

AND10
AND
ESW_89AE.Disconnector.Position.open [BOOL] X1 Y
User Defined Signals.M2 ESB OPEN [BOOL] X2
User Defined Signals.LCC IN REMOTE [BOOL] X3

3.2 ( Page1 - 7)
1.2 ( Page1 - 3)

User Defined Signals.N/M SWT IN NRML MODE [BOOL] X4


CB.Circuit break..Position.closed [BOOL] X5
ISO_89A.Disconnector.Position.closed [BOOL] X6
User Defined Signals.66KV B/C CLOSED [BOOL] X7 and10_13

AND10
AND
X1 Y ISO_89B.Interlocking.>Enable opening [BOOL]
User Defined Signals.GD3 GAS PR 2ST STG AL [BOOL] X2
User Defined Signals.GD3 GAS PR 3ST STG AL [BOOL] X3
ISO_89B.Disconnector.Position.closed [BOOL] X4
Totally Integrated
Automation Portal

CB/ISO&ESW INTERLOCK - Data flow/Task: Interlocking (3.1 / 3.2)


2.1 ( Page1 - 4)

3.2 ( Page1 - 7)
Totally Integrated
Automation Portal

CB/ISO&ESW INTERLOCK - Data flow/Task: Interlocking (3.2 / 3.2)


2.2 ( Page1 - 5)
3.1 ( Page1 - 6)
Totally Integrated
Automation Portal
Totally Integrated
Automation Portal

CB/ISO&ESW INTERLOCK - Control flow/Task: Interlocking


Run se‐ Object/parameter Operand Type Task Additional Comment
quence tasks
AND10 and10_6 AND10 default

AND10 and10_7 AND10 default

AND10 and10_1 AND10 default

AND10 and10_2 AND10 default

AND10 and10_3 AND10 default

AND10 and10_4 AND10 default

OR10 or10_4 OR10 default

OR10 or10_3 OR10 default

OR10 or10_1 OR10 default

OR10 or10_2 OR10 default

AND10 and10_11 AND10 default

AND10 and10_15 AND10 default

AND10 and10_9 AND10 default

AND10 and10_8 AND10 default

AND10 and10_5 AND10 default

AND10 and10_12 AND10 default

AND10 and10_13 AND10 default

AND10 and10_14 AND10 default

AND10 and10_16 AND10 default

AND10 and10_17 AND10 default

AND10 and10_10 AND10 default

You might also like