Scribd
Upload
225 views

102 HC

The document provides specifications for different nozzle models for oxy-fuel cutting, including the standard nozzle, high-speed nozzles operating at 5 and 7 bars of oxygen pressure, and a nozzle for IK-82 series cutting machines. Each nozzle lists the applicable material thickness range, recommended gas pressure settings, gas consumption rates, and cutting speed ranges. The nozzles vary in design features like divergent technology and stainless steel inner tubes to enable cutting of different material thicknesses at higher speeds.

Uploaded by

Akmal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
225 views

102 HC

The document provides specifications for different nozzle models for oxy-fuel cutting, including the standard nozzle, high-speed nozzles operating at 5 and 7 bars of oxygen pressure, and a nozzle for IK-82 series cutting machines. Each nozzle lists the applicable material thickness range, recommended gas pressure settings, gas consumption rates, and cutting speed ranges. The nozzles vary in design features like divergent technology and stainless steel inner tubes to enable cutting of different material thicknesses at higher speeds.

Uploaded by

Akmal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Cutting nozzle

102-HC Standard Nozzle Acetylene

■ Koike Standard nozzle Thickness Pressure (bar) Consumption (Nl/h) Cutting speed
Stock # tip #
(mm) Oxygen Fuel gas Cutting O2 Preheat O2 Fuel gas (mm/min)
■ Suitable for both hand and
80011 5 00 1.5 0.2 690 410 370 -660
machine cutting
80012 5-10 0 2.0 0.2 1200 410 370 660-550
80013 10-15 1 2.5 0.2 2100 480 430 550-490
80014 15-30 2 3.0 0.20 3400 480 430 490-400
80015 30-40 3 3.0 0.20 4300 480 430 400-350
80016 40-50 4 3.5 0.3 6500 550 500 350-320
80017 50-100 5 4.0 0.3 11000 690 630 320-200
80018 100-150 6 4.0 0.4 15000 770 700 200-150
80019 150-250 7 4.5 0.4 22000 1060 960 150-80
80051 250-300 8 4.5 0.4 28000 1060 960 80-45

102-D5 High-speed Nozzle (5 bar) Acetylene

Thickness Pressure (bar) Consumption (Nl/h) Cutting speed


Stock # tip #
■ Divergent technology (mm) Oxygen Fuel gas Cutting O2 Preheat O2 Fuel gas (mm/min)
(5 Bar cutting oxygen) 80201 -5 00 5.0 0.2 850 520 470 -700
■ Stainless steel inner tube 80202 5-10 0 5.0 0.2 1600 520 470 700-625
80203 10-15 1 5.0 0.2 2400 600 550 625-550
80204 15-30 2 5.0 0.2 3600 600 550 550-475
80205 30-40 3 5.0 0.2 4800 600 550 475-425
80206 40-50 4 5.0 0.2 5600 750 680 425-350
80207 50-100 5 5.0 0.3 8800 860 780 350-250
80208 100-150 6 5.0 0.3 13500 950 860 250-175
80209 150-250 7 5.0 0.3 24000 1330 1210 175-90
80210 250-300 8 5.0 0.4 31000 1600 1450 90-60

102-D7 High-speed Nozzle (7 bar) Acetylene

Thickness Pressure (bar) Consumption (Nl/h) Cutting speed


Stock # tip #
■ Divergent technology (mm) Oxygen Fuel gas Cutting O2 Preheat O2 Fuel gas (mm/min)
(7 Bar cutting oxygen) 80221 5 00 7.0 0.2 750 520 470 -750
■ Stainless steel inner tube 80222 5-10 0 7.0 0.2 1100 520 470 750-680
80223 10-15 1 7.0 0.2 2500 600 550 680-600
80224 15-30 2 7.0 0.20 3800 600 550 600-500
80225 30-40 3 7.0 0.20 5400 600 550 500-450
80226 40-50 4 7.0 0.2 7300 750 680 450-400
80227 50-100 5 7.0 0.3 10000 860 780 400-260
80228 100-150 6 7.0 0.3 14000 950 860 260-180
80229 150-250 7 7.0 0.3 22000 1330 1210 180-100
80230 250-300 8 7.0 0.4 35000 1600 1450 100-70

402-ST For IK-82 series Acetylene

■ For IK-82 series cutting ma- Thickness Pressure (bar) Consumption (Nl/h) Cutting speed
Stock # tip #
(mm) Oxygen Fuel gas Cutting O2 Preheat O2 Fuel gas (mm/min)
chine only.
80082 5-10 0 2.0 0.2 1200 380 340 500-450
80083 10-15 1 2.5 0.2 2100 485 440 450-400
80084 15-30 2 3.0 0.2 3400 485 440 400-350
80085 30-40 3 3.0 0.2 4300 550 500 350-300
80086 40-50 4 3.5 0.25 6500 640 580 300-250
80087 50-100 5 4.0 0.3 11000 730 660 250-200

You might also like