EDS / EFS Series Cl. I, Div.

1 & 2, Groups B*, C, D Explosionproof 4C

Cl. II, Div. 1, Groups E, F, G Dust-Ignitionproof
Control Stations Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Fully Assembled EFS and NEMA 3, 7B*CD, 9EFG
EDS Factory Sealed Devices
Applications: Certifications and Compliances:
Factory sealed enclosures are installed in a rigid metallic conduit • NEC/CEC:
system for surface mounting adjacent to or remote from equipment Class I, Division 1 & 2, Groups B*, C, D
being controlled and are used: Class II, Division 1, Groups E, F, G
• To prevent arcing of enclosed device from causing ignition of a Class II, Division 2, Groups F, G
specific hazardous atmosphere or atmospheres external to the
enclosure Class III
• In industrial areas such as chemical plants, oil and gas refineries, • NEMA/EEMAC: 3, 7B*CD, 9EFG
paint and varnish manufacturing plants, gasoline bulk loading • UL Standard: 1203
terminals, grain elevators, grain processing industries, coal • CSA Standard: C22.2 No. 30
processing or handling areas, or metal handling or finishing areas
where atmosphere may contain hazardous gases and/or dust Standard Materials:
• In non-hazardous areas where sturdy, durable enclosures are
• Bodies – Feraloy® iron alloy; copper-free aluminum
required
• Front operated pushbutton and pilot light covers – Feraloy iron
• In conjunction with magnetic starters or contactors for remote
alloy
control of motors

4C
• Side operated type pushbutton covers – copper-free aluminum
Manual motor starting switch enclosures are used:
• Shafts – stainless steel
• For manual starting of small AC or DC motors
• Shaft bushings – stainless steel
• To provide manual starting and stopping and, in the case of units
with heaters, motor running protection • Rocker handle and pushbutton guards – type 6 / 6 nylon
• Sealing enclosures – copper-free aluminum

Features: Standard Finishes:

Factory sealed devices have many distinct advantages:
• Feraloy iron alloy – electrogalvanized and aluminum acrylic paint
• Reduce installation problems
• Copper-free aluminum – natural
• Eliminate external seals
• Type 6 / 6 nylon – black
• Lower installation costs
• Stainless steel – natural
• Improve safety
• Are used with general purpose snap and pushbutton type switches
• Standard neoprene covers for front operated pushbuttons. Prevents
Options:
accumulation of dirt and entrance of water around operating shafts The following special options are available from the factory by
adding suffix to Cat. #:
Description Suffix
• Mounting lugs and taper tapped hubs with integral bushings
• Momentary red emergency “STOP” button – front operated
• Large machine screws for fastening covers to bodies mushroom button, breaks normally closed contacts only...... S111
• Lockout provisions on front operated pushbutton (marked "STOP" • Lockout provision on front operated pushbutton cover
and "OFF") and selector switch covers (standard on buttons marked "OFF" and "STOP").................. S153
• Lockout hole for padlock having 1/ 4" hasp is provided when used • For 24 VDC operation on pilot lights ....................................... S300
with covers for front lever and side rocker type operation • Three-position selector switches with modified operation:
• Close tolerances in machining of wide, mating flanges and Momentary contact clockwise operation, spring return to
journalled shafts and bearings for front button operation, produces center, maintained contact counter-clockwise operation S634
flametightness of enclosure joints Momentary contact counter-clockwise operation, spring
return to center, maintained contact clockwise operation.... S635
• On enclosures with front lever and side rocker type operating • Bodies and covers (single and two gang units) – copper-free
handles, threaded type shafts and bushings are used to ensure aluminum.................................................................................. SA
flametightness • Where indicated in the catalog listings, EDS units suitable
• Dead end (EFS or EDS) or through feed (EFSC or EDSC) hubs – 1/2" for Class I, Division 1, Group B usage can be supplied, add
to 1" sizes suffix -GB, EFS units are suitable for Class I, Division 1,
• When STOP is indicated, button is automatically red. When START Group B as standard ............................................................... GB
is indicated, button is automatically green. Otherwise, black • Maintained red emergency “STOP” button with lockout –
buttons are standard. front operated mushroom button breaks normally closed
and makes normally open contacts (push to stop), lockout
standard (will not fit with a pilot light if transformer is
required) .................................................................................. S769
• Spring return to center from right and left............................... S842
EDS bodies and factory sealed cover and device sub-assemblies are
available for field assembly (see page 521).

*See suffix GB in Options section.

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2016 Eaton

526-527.qxp 12/16/2013 4:16 PM Page 526

4C EDS / EFS Series Cl. I, Div. 1 & 2, Groups B*, C, D

Cl. II, Div. 1, Groups E, F, G
Explosionproof
Dust-Ignitionproof
Control Stations Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Fully Assembled EFS and NEMA 3, 7B*CD, 9EFG
EDS Factory Sealed Devices
Methods of Factory Sealing
EFS/EDS Series EDS Series
4C

EDS factory sealed snap switches or manual motor starting switches

Factory sealed EDS and EFS pilot light, pushbutton and selector do not need external sealing. The switches are enclosed in a unique
switch control stations do not need external sealing. Device contacts sealing well with double flanges which mate with the cover and the
are factory sealed in explosionproof ESWP contact blocks. Small, body. Small, compact enclosures have accurately ground wide
compact enclosures have accurately ground wide flanges on both flanges on body, cover and sealing well for flame-tight joints. Wiring
the body and cover for a flame-tight joint. pigtails are factory sealed from under the sealing well. Reliable
pouring of seals at the factory ensures safe sealing.
Dimensions (Inches) ‡
Bodies Covers†

Hub Dim. Dim.

Size "h" "i"
1
/2 /4
3 13
/16
3
/4 /8
7 13
/16
1 1 15
/16

General use snap switch Pushbutton switch rocker type

front operated and manual side operated
Side View motor starting switch

Pushbutton switch front Selector switch

Front View - Single gang Front View - Two gang operated

*See suffix GB in Options section.

‡Dimensions are approximate, not for construction purposes.
† Surface covers have same length and width as bodies.

526 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
532-533.qxp 12/16/2013 4:17 PM Page 532

4C EDS / EFS Series Control Stations Cl. I, Div. 1 & 2, Groups B*, C, D
Cl. II, Div. 1, Groups E, F, G
Explosionproof
Dust-Ignitionproof
Fully Assembled EDS Factory Sealed Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Combination Pushbutton and Pilot Light NEMA 3, 7B*CD, 9EFG
Stations 600VAC, Heavy Duty
Pushbutton contacts and pilot light Two gang units with single pilot light covers can be furnished with transformers.
receptacles are sealed in separate Specify markings for each button. See table below listings.
chambers. External seals are not required.
Lamps† are 6 watt, type S6, candelabra
base for use on 110–125 volt circuits.

Dimensions
see page 526

Ordering Information - Ordering Information -

4C

Single Gang Two Gang

Description Dead End Through Feed Dead End Through Feed Dead End Through Feed
No. No. Pushbuttons 2 2 2 2
1 1
Pushbuttons No. Pilot Lights† 1 1 2 2
No. Pilot
1 1
Lights†
Diagram
Diagram

Hub Size Cat. # Cat. # Hub Size Cat. # Cat. # Cat. # Cat. #
1
/2 EDS11473 ➀➁ EDSC11473 ➀➁ 1/2 EDS12471 ➀➁ EDSC12471 ➀➁
3
/4 EDS21473 ➀➁ EDSC21473 ➀➁ 3/4 EDS22471 ➀➁ EDSC22471 ➀➁ EDS22868 ➀➁ EDSC22868 ➀➁
1 EDS31473 ➀➁ EDSC31473 ➀➁ 1 EDS32471 ➀➁ EDSC32471 ➀➁ EDS32868 ➀➁ EDSC32868 ➀➁

➀ Add color symbol for each pilot light from table below. Example: EDS21473 with a red light is EDS21473-J1

Color Symbol Color Symbol Color Symbol

Red J1 Amber J6 Blue J11
Green J3 Clear J10

➁ If desired, markings on indicating plates may be added to catalog number. Select from the list of stardard markings below:

START LIGHT ON DOWN RUN FORWARD ON AUTOMATIC OUT

STOP EMERGENCY RAISE TRIP CLOSE IN JOG REVERSE
RESET OPEN STOP HAND LOWER TEST UP
* All enclosures listed above can be modified for Class I, Group B, Division 1 usage. Add suffix GB to the Cat. No. Example: EDS11473-J1-GB. Conduit seal(s) must be installed
within 11/2" of each conduit opening. These products are suitable for Group B, Div. 2 as listed, without external conduit seals.
† LED pilot lights can be furnished in place of standard incandescent pilot lamps. Add suffix LED to catalog number after color symbol. For 24 VDC operation on pilot lights add suffix S300.

532 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
538-539.qxp 12/16/2013 4:20 PM Page 539

EDS / EFS Series For a complete list of components for EDS & 4C
EFS Control Stations, see page 514 for
Control Stations FlexStation™ Series
Sub-assembly Reference Guide

Control Stations and their Sub-assemblies

Complete Control Sub-assembly
Station Cover & Device Cast Back Box Notes and Requirements
PUSHBUTTONS
EDS2184 DSD918 EDS271
EDSC2184 DSD918 EDSC271
EDS215 DSD922 EDS271 Start/ Stop Legend included
EDSC215 DSD922 EDSC271 Start/ Stop Legend included
EDS2190 DSD921 EDS271
EDSC2190 DSD921 EDSC271
EDS2184-S769-EM-SP DSD918-S769-EM-SP EDS271 Emergency Stop Legend included
EDSC2184-S769-EM-SP DSD918-S769-EM-SP EDSC271 Emergency Stop Legend included
EDS2284 (2) DSD918 EDS272
EDSC2284 (2) DSD918 EDSC272

4C
EDS225 (2) DSD922 EDS272 Start/ Stop Legend included
EDSC225 (2) DSD922 EDSC272 Start/ Stop Legend included
EDS2290 (2) DSD921 EDS272
EDSC2290 (2) DSD921 EDSC272
PILOT LIGHTS
EFS21524-J* DSD948-J* EDS271 †
* Insert pilot light color
EFSC21524-J* DSD948-J* EDSC271 †
† When using the EFS Series pilot light in Cl. I, Div. 1, Group B
EFS21561-J*-J* DSD947-J*-J* EDS271 †
applications, the EFS back box is required in place of the EDS.
EFSC21561-J*-J* DSD947-J*-J* EDSC271 †
PUSHBUTTON / PILOT LIGHT COMBINATIONS
EDS21473-J* DSD958-J* EDS271 * Insert pilot light color
EDSC21473-J* DSD958-J* EDSC271 * Insert pilot light color
EDS22471-J* DSD948-J* & DSD921 EDS272 * Insert pilot light color
EDSC22471-J* DSD948-J* & DSD921 EDSC272 * Insert pilot light color
EDS22868-J*-J* DSD947-J*-J* & DSD921 EDS272 * Insert pilot light color
EDSC22868-J*-J* DSD947-J*-J* & DSD921 EDSC272 * Insert pilot light color
SELECTOR SWITCHES
EDS21271 DSD923 EDS271
EDSC21271 DSD923 EDSC271
EDS21272 DSD924 EDS271
EDSC21272 DSD924 EDSC271
EDS21273 DSD925 EDS271
EDSC21273 DSD925 EDSC271
EDS21274 DSD926 EDS271
EDSC21274 DSD926 EDSC271
EDS21275 DSD927 EDS271
EDSC21275 DSD927 EDSC271
MANUAL MOTOR STARTER WITH O/L
EDS21101 DS415A & SW13 EDS271 "-W * " for heater, or "-0" distributor provided
EDSC21101 DS415A & SW13 EDSC271 "-W * " for heater, or "-0" distributor provided
EDS21102 DS415A & SW14 EDS271 "-W * " for heater, or "-0" distributor provided
EDSC21102 DS415A & SW14 EDSC271 "-W * " for heater, or "-0" distributor provided
EDS21093 DS415A & SW11 EDS271 "-G * " for heater, or "-0" distributor provided
EDSC21093 DS415A & SW11 EDSC271 "-G * " for heater, or "-0" distributor provided
EDS21094 DS415A & SW12 EDS271 "-G * " for heater, or "-0" distributor provided
EDSC21094 DS415A & SW12 EDSC271 "-G * " for heater, or "-0" distributor provided
EDS2199 DS415A & SW9 EDS271 "-P * " for heater, or "-0" distributor provided
EDSC2199 DS415A & SW9 EDSC271 "-P * " for heater, or "-0" distributor provided
EDS21100 DS415A & SW10 EDS271 "-P * " for heater, or "-0" distributor provided
EDSC21100 DS415A & SW10 EDSC271 "-P * " for heater, or "-0" distributor provided

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 539
540-541.qxp 12/16/2013 4:20 PM Page 540

4C EDS / EFS Series Control Stations For a complete list of components for
EDS & EFS Control Stations, see page 514
for FlexStation™ Series
Sub-assembly
Reference Guide

Control Stations and their Sub-assemblies

Sub-assembly
Complete Control Station Cover & Device Cast Back Box Notes and Requirements
MANUAL MOTOR STARTER
EFD218-T8 DSD916 EDS271
Alternative DS415A & SQ D 2510 KO-1 EDS271 SQ D switch provided by distributor
EFDC218-T8 DSD916 EDSC271
Alternative DS415A & SQ D 2510 KO-1 EDSC271 SQ D switch provided by distributor
EFD2419 DSD917 EDS271
Alternative DS415A & GE 2368S EDS271 GE switch provided by distributor
EFDC2419 DSD917 EDSC271
Alternative DS415A & GE 2368S EDSC271 GE switch provided by distributor
SNAP SWITCHES
EDS2129 DS652 & SW5 EDS271
Alternative DSD933 EDS271 External Sealing Fitting Required
4C

EDSC2129 DS652 & SW5 EDSC271

Alternative DSD933 EDSC271 External Sealing Fitting Required
EDS218 DS652 & SW6 EDS271
Alternative DSD634 EDS271 External Sealing Fitting Required
EDSC218 DS652 & SW6 EDSC271
Alternative DSD634 EDSC271 External Sealing Fitting Required
EDS2130 DS652 & SW7 EDS271
Alternative DSD936 EDS271 External Sealing Fitting Required
EDSC2130 DS652 & SW7 EDSC271
Alternative DSD936 EDSC271 External Sealing Fitting Required
EDS2140 DS652 & SW8 EDS271
Alternative DSD937 EDS271 External Sealing Fitting Required
EDSC2140 DS652 & SW8 EDSC271
Alternative DSD937 EDSC271 External Sealing Fitting Required
EDS2229 (2) DS652 & (2) SW5 EDS272
Alternative (2) DSD933 EDS272 External Sealing Fitting Required
EDSC2229 (2) DS652 & (2) SW5 EDSC272
Alternative (2) DSD933 EDSC272 External Sealing Fitting Required
EDSC228 (2) DS652 & (2) SW6 EDSC272
Alternative (2) DSD634 EDSC272 External Sealing Fitting Required
EDS2230 (2) DS652 & (2) SW7 EDS272
Alternative (2) DSD936 EDS272 External Sealing Fitting Required
EDSC2230 (2) DS652 & (2) SW7 EDSC272
Alternative (2) DSD936 EDSC272 External Sealing Fitting Required
EDSC2240 (2) DS652 & (2) SW8 EDSC272
Alternative (2) DSD937 EDSC272 External Sealing Fitting Required
ROCKER SWITCHES
EDS2596 DSD949 EDS271
EDSC2596 DSD949 EDSC271
EDS2162 DSD951 EDS271 Start/ Stop Legend included
EDSC2162 DSD951 EDSC271 Start/ Stop Legend included
EDS2194 DSD950 EDS271
EDSC2194 DSD950 EDSC271
EDS2696 (2) DSD949 EDS272 Start/ Stop Legend included
EDSC2696 (2) DSD949 EDSC272 Start/ Stop Legend included
EDS2262 (2) DSD951 EDS272
EDSC2262 (2) DSD951 EDSC272
EDS2294 (2) DSD950 EDS272
EDSC2294 (2) DSD950 EDSC272
Additional notes:
• See Eaton's Crouse-Hinds' installation instructions for any possible additional sealing requirements.
• Part numbers listed with 3/ 4" hub in back box (Ex. EDS2184). For 1/ 2" hub, change the "2" to "1" (EDS1184). For 1" hub, change the "2" to "3" (EDS3184).
• Control Stations with "Stop" legend have lockout provided as standard.
• Pilot Light Colors J*-- J1= Red, J3= Green, J6= Amber, J10= Clear, J11= Blue. LED pilot lights are available with LED suffix.
• Pilot Light Transformers for voltages over 125V. Suffix T2= 240/220 - 110V, T4= 480/440 - 110V, T5= 600/500 - 110V (not available on double pilot cover).
• Standard legend plate markings are available by adding nomenclature after the part number (EDS2184-Run).
• Selector switch nameplate kits available. 2-Pos = "SS2KIT", 3-Pos = "SS3KIT". See Replacement Parts book for additional information.
• Copper-free aluminum bodies and covers available with SA suffix.
• Additional control station options may be found in Section 4C.
• Group B ratings may be achieved by adding the GB suffix or using the EFS back box. See part number instructions for the item required.
• Group B ratings may already be achieved when used in Class I, Division 2 applications. See Certifications and Compliances for item required.
• Additional control station configurations available through the FlexStation Component Series.

540 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
EDS / EFS Series Cl. I, Div. 1 & 2, Groups B*, C, D Explosionproof 4C
Cl. II, Div. 1, Groups E, F, G Dust-Ignitionproof
Control Stations Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Fully Assembled EFS and NEMA 3, 7B*CD, 9EFG
EDS Factory Sealed Devices
Applications: Certifications and Compliances:
Factory sealed enclosures are installed in a rigid metallic conduit • NEC/CEC:
system for surface mounting adjacent to or remote from equipment Class I, Division 1 & 2, Groups B*, C, D
being controlled and are used: Class II, Division 1, Groups E, F, G
• To prevent arcing of enclosed device from causing ignition of a Class II, Division 2, Groups F, G
specific hazardous atmosphere or atmospheres external to the
enclosure Class III
• In industrial areas such as chemical plants, oil and gas refineries, • NEMA/EEMAC: 3, 7B*CD, 9EFG
paint and varnish manufacturing plants, gasoline bulk loading • UL Standard: 1203
terminals, grain elevators, grain processing industries, coal • CSA Standard: C22.2 No. 30
processing or handling areas, or metal handling or finishing areas
where atmosphere may contain hazardous gases and/or dust Standard Materials:
• In non-hazardous areas where sturdy, durable enclosures are
• Bodies – Feraloy® iron alloy; copper-free aluminum
required
• Front operated pushbutton and pilot light covers – Feraloy iron
• In conjunction with magnetic starters or contactors for remote
alloy
control of motors

4C
• Side operated type pushbutton covers – copper-free aluminum
Manual motor starting switch enclosures are used:
• Shafts – stainless steel
• For manual starting of small AC or DC motors
• Shaft bushings – stainless steel
• To provide manual starting and stopping and, in the case of units
with heaters, motor running protection • Rocker handle and pushbutton guards – type 6 / 6 nylon
• Sealing enclosures – copper-free aluminum

Features: Standard Finishes:

Factory sealed devices have many distinct advantages:
• Feraloy iron alloy – electrogalvanized and aluminum acrylic paint
• Reduce installation problems
• Copper-free aluminum – natural
• Eliminate external seals
• Type 6 / 6 nylon – black
• Lower installation costs
• Stainless steel – natural
• Improve safety
• Are used with general purpose snap and pushbutton type switches
• Standard neoprene covers for front operated pushbuttons. Prevents
Options:
accumulation of dirt and entrance of water around operating shafts The following special options are available from the factory by
adding suffix to Cat. #:
Description Suffix
• Mounting lugs and taper tapped hubs with integral bushings
• Momentary red emergency “STOP” button – front operated
• Large machine screws for fastening covers to bodies mushroom button, breaks normally closed contacts only...... S111
• Lockout provisions on front operated pushbutton (marked "STOP" • Lockout provision on front operated pushbutton cover
and "OFF") and selector switch covers (standard on buttons marked "OFF" and "STOP").................. S153
• Lockout hole for padlock having 1/ 4" hasp is provided when used • For 24 VDC operation on pilot lights ....................................... S300
with covers for front lever and side rocker type operation • Three-position selector switches with modified operation:
• Close tolerances in machining of wide, mating flanges and Momentary contact clockwise operation, spring return to
journalled shafts and bearings for front button operation, produces center, maintained contact counter-clockwise operation S634
flametightness of enclosure joints Momentary contact counter-clockwise operation, spring
return to center, maintained contact clockwise operation.... S635
• On enclosures with front lever and side rocker type operating • Bodies and covers (single and two gang units) – copper-free
handles, threaded type shafts and bushings are used to ensure aluminum.................................................................................. SA
flametightness • Where indicated in the catalog listings, EDS units suitable
• Dead end (EFS or EDS) or through feed (EFSC or EDSC) hubs – 1/2" for Class I, Division 1, Group B usage can be supplied, add
to 1" sizes suffix -GB, EFS units are suitable for Class I, Division 1,
• When STOP is indicated, button is automatically red. When START Group B as standard ............................................................... GB
is indicated, button is automatically green. Otherwise, black • Maintained red emergency “STOP” button with lockout –
buttons are standard. front operated mushroom button breaks normally closed
and makes normally open contacts (push to stop), lockout
standard (will not fit with a pilot light if transformer is
required) .................................................................................. S769
• Spring return to center from right and left............................... S842
EDS bodies and factory sealed cover and device sub-assemblies are
available for field assembly (see page 521).

*See suffix GB in Options section.

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2016 Eaton

526-527.qxp 12/16/2013 4:16 PM Page 526

4C EDS / EFS Series Cl. I, Div. 1 & 2, Groups B*, C, D

Cl. II, Div. 1, Groups E, F, G
Explosionproof
Dust-Ignitionproof
Control Stations Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Fully Assembled EFS and NEMA 3, 7B*CD, 9EFG
EDS Factory Sealed Devices
Methods of Factory Sealing
EFS/EDS Series EDS Series
4C

EDS factory sealed snap switches or manual motor starting switches

Factory sealed EDS and EFS pilot light, pushbutton and selector do not need external sealing. The switches are enclosed in a unique
switch control stations do not need external sealing. Device contacts sealing well with double flanges which mate with the cover and the
are factory sealed in explosionproof ESWP contact blocks. Small, body. Small, compact enclosures have accurately ground wide
compact enclosures have accurately ground wide flanges on both flanges on body, cover and sealing well for flame-tight joints. Wiring
the body and cover for a flame-tight joint. pigtails are factory sealed from under the sealing well. Reliable
pouring of seals at the factory ensures safe sealing.
Dimensions (Inches) ‡
Bodies Covers†

Hub Dim. Dim.

Size "h" "i"
1
/2 /4
3 13
/16
3
/4 /8
7 13
/16
1 1 15
/16

General use snap switch Pushbutton switch rocker type

front operated and manual side operated
Side View motor starting switch

Pushbutton switch front Selector switch

Front View - Single gang Front View - Two gang operated

*See suffix GB in Options section.

‡Dimensions are approximate, not for construction purposes.
† Surface covers have same length and width as bodies.

526 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
526-527.qxp 12/16/2013 4:16 PM Page 527

EDS / EFS Series Control Stations Cl. I, Div. 1 & 2, Groups B*, C, D Explosionproof 4C
Cl. II, Div. 1, Groups E, F, G Dust-Ignitionproof
Cl. II, Div. 2, Groups F, G Raintight
Fully Assembled EDS Factory Sealed Cl. III Wet Locations
Pushbutton Stations NEMA 3, 7B*CD, 9EFG
Front Operated, 600VAC Heavy Duty
Ordering Information - Single Gang
Normal Pos. 1 Circuit 2 Circuits 2 Circuits■ 2 Circuits 2 Circuits■
Universal Universal Universal
START-
STOP
Marking Specify Specify unless Specify Specify
otherwise
specified

Diagram
EDS2184 S769 EDS215
Replacement Pushbutton Contacts - see page 571 Maintained
Mushroom Head

Enclosure with Pushbuttons

4C
Hub Size Cat. # Cat. # Cat. # Cat. #§ Cat. #§
Dead End
1
/2 EDS1184 ➀ EDS115 ➀ EDS1155 ➀
3
/4 EDS2184 ➀ EDS2190 ➀ EDS215 ➀ EDS2192 ➀ EDS2155 ➀
1 EDS3184 ➀ EDS3190 ➀ EDS315 ➀ EDS3192 ➀ EDS3155 ➀
Through Feed
1
/2 EDSC1184 ➀ EDSC1190 ➀ EDSC115 ➀ EDSC1192 ➀ EDSC1155 ➀
3
/4 EDSC2184 ➀ EDSC2190 ➀ EDSC215 ➀ EDSC2192 ➀ EDSC2155 ➀
1 EDSC3184 ➀ EDSC3190 ➀ EDSC315 ➀ EDSC3192 ➀ EDSC3155 ➀ EDSC225

Ordering Information - Two Gang Dimensions

Normal 1 Circuit 2 Circuits see page 526
2 Circuits■
Pos. Universal Universal
START-STOP
unless
Marking Specify Specify
otherwise
specified

Diagram

Replacement
ED11 ED12 ED12■
Pushbuttons‡

Enclosure with Pushbuttons

Hub Size Cat. # Cat. # Cat. #
Dead End
/4
3
EDS2284 ➀ EDS2290 ➀ EDS225 ➀
1 EDS3284 ➀ EDS3290 ➀ EDS325 ➀
Through Feed
1
/2 EDSC1284 ➀ EDSC1290 ➀ EDSC125 ➀
3
/4 EDSC2284 ➀ EDSC2290 ➀ EDSC225 ➀
1 EDSC3284 ➀ EDSC3290 ➀ EDSC325 ➀

➀ If desired, markings on indicating plates may be added to catalog number. Select from the list of standard markings below:
START OFF RESET LIGHT ON EMERGENCY OPEN DOWN RAISE
STOP RUN TRIP HAND FORWARD CLOSE IN LOWER
ON JOG TEST AUTOMATIC REVERSE UP OUT

* Class I, Group B: Consider using EFS series pushbuttons, see page 528. All enclosures listed above can be modified for Class I, Group B, Div. 1 usage. Add suffix GB to the Cat. No. Seals
must be installed within 11/ 2" of each conduit opening in Division 1. These products are suitable for Group B, Div. 2 as listed, without external seals. In Canada, for Group B applications
consult factory.
■Two universal contact blocks, must be wired as two circuits, with one normally open and one normally closed.
§Single external button operates both inner buttons simultaneously.

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 527
528-529.qxp 12/16/2013 4:16 PM Page 528

4C EDS / EFS Series Control Stations Cl. I, Div. 1 & 2, Groups B*, C, D Explosionproof
Cl. II, Div. 1, Groups E, F, G Dust-Ignitionproof
Fully Assembled EFS Factory Sealed Cl. II, Div. 2, Groups F, G Raintight
Pushbutton Stations Cl. III Wet Locations
Front Operated, 600VAC Heavy Duty NEMA 3, 7B*CD, 9EFG

Ordering Information
Normal Pos. 1 Circuit 2 Circuits 2 Circuits■ 2 Circuits
2 Circuits■
Universal Universal Universal
Marking
START-
STOP
Specify Specify unless Specify Specify
otherwise
specified
Diagram

Replacement
ED11 ED12 ED12■ ED12 ED12■
Pushbuttons‡ EFS2184 START EFS215
Standard black
Enclosure with Pushbuttons pushbutton
4C

Hub Size Cat. # Cat. # Cat. # Cat. #§ Cat. #§

Dead End
/2
1
EFS1184 ➀ EFS115 ➀ EFS1155 ➀ Dimensions
/4
3
EFS2184 ➀ EFS2190 ➀ EFS215 ➀ EFS2192 ➀ EFS2155 ➀ see page 526
1 EFS3184 ➀ EFS3190 ➀ EFS315 ➀ EFS3192 ➀ EFS3155 ➀
Through Feed
1
/2 EFSC1184 ➀ EFSC1190 ➀ EFSC115 ➀ EFSC1192 ➀ EFSC1155 ➀
3
/4 EFSC2184 ➀ EFSC2190 ➀ EFSC215 ➀ EFSC2192 ➀ EFSC2155 ➀
1 EFSC3184 ➀ EFSC3190 ➀ EFSC315 ➀ EFSC3192 ➀ EFSC3155 ➀

➀ If desired, markings on indicating plates may be added to catalog number. Select from the list of standard markings below:

START OFF RESET LIGHT ON EMERGENCY OPEN DOWN RAISE

STOP RUN TRIP HAND FORWARD CLOSE IN LOWER
ON JOG TEST AUTOMATIC REVERSE UP OUT

*Class I, Group B: All enclosures listed above are suitable for Class I, Group B, Div. 1 usage. Seals only have to be installed on 1 inch conduit within 5 ft. in Division 1.
‡For replacement contact blocks, see page 571.
■Two universal contact blocks, must be wired as two circuits, with one normally open and one normally closed.
§Single external button operates both inner buttons simultaneously.

528 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
528-529.qxp 12/16/2013 4:16 PM Page 529

EDS / EFS Series Control Stations Cl. I, Div. 1 & 2, Groups B*, C, D
Cl. II, Div. 1, Groups E, F, G
Explosionproof
Dust-Ignitionproof
4C
Fully Assembled EDS Factory Sealed Cl. II, Div. 2, Groups F, G Raintight
Pushbutton Stations Cl. III Wet Locations
Side Rocker Handle, 600VAC Heavy Duty NEMA 3, 7B*CD, 9EFG

Dimensions
see page 526
EDSC2162 EDS2696

Ordering Information - Single Gang Two Gang

1 Circuit 2 Circuits 1 Circuit 2 Circuits
Normal Pos. 2 Circuits■ Normal Pos. 2 Circuits
Universal Universal Universal Universal

4C
START-STOP START-STOP
unless unless
Marking Specify Specify Marking Specify Specify
otherwise otherwise
specified specified

Diagram Diagram

Replacement Replacement
ED11 ED12 ED12■ ED11 ED12 ED12■
Pushbuttons‡ Pushbuttons‡

Enclosure with Pushbuttons Enclosure with Pushbuttons

Hub Size Cat. # Cat. # Cat. # Hub Size Cat. # Cat. # Cat. #
Dead End Dead End
/2
1
EDS1596 ➀ EDS1162 ➀ 3
/4 EDS2696 ➀ EDS2294 ➀ EDS2262 ➀
/4
3
EDS2596 ➀ EDS2194 ➀ EDS2162 ➀ 1 EDS3696 ➀ EDS3294 ➀ EDS3262 ➀
1 EDS3596 ➀ EDS3194 ➀ EDS3162 ➀ Through Feed
Through Feed 1
/2 EDSC1696 ➀ EDSC1294 ➀ EDSC1262 ➀
/2
1
EDSC1596 ➀ EDSC1194 ➀ EDSC1162 ➀ 3
/4 EDSC2696 ➀ EDSC2294 ➀ EDSC2262 ➀
/4
3
EDSC2596 ➀ EDSC2194 ➀ EDSC2162 ➀ 1 EDSC3696 ➀ EDSC3294 ➀ EDSC3262 ➀
1 EDSC3596 ➀ EDSC3194 ➀ EDSC3162 ➀

➀ If desired, markings on indicating plates may be added to catalog number. Select from the list of standard markings below:

START OFF RESET LIGHT ON EMERGENCY OPEN DOWN RAISE

STOP RUN TRIP HAND FORWARD CLOSE IN LOWER
ON JOG TEST AUTOMATIC REVERSE UP OUT
*Class I, Group B: All enclosures listed above can be modified for Class I, Group B, Div. 1 usage. Add suffix GB to the Cat. No. Seals must be installed within 11/ 2" of each conduit opening in
Division 1. These products are suitable for Group B, Div. 2 as listed, without external seals.
‡For replacement contact blocks, see page 571.
■Two universal contact blocks, must be wired as two circuits, with one normally open and one normally closed.

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 529
538-539.qxp 12/16/2013 4:20 PM Page 539

EDS / EFS Series For a complete list of components for EDS & 4C
EFS Control Stations, see page 514 for
Control Stations FlexStation™ Series
Sub-assembly Reference Guide

Control Stations and their Sub-assemblies

Complete Control Sub-assembly
Station Cover & Device Cast Back Box Notes and Requirements
PUSHBUTTONS
EDS2184 DSD918 EDS271
EDSC2184 DSD918 EDSC271
EDS215 DSD922 EDS271 Start/ Stop Legend included
EDSC215 DSD922 EDSC271 Start/ Stop Legend included
EDS2190 DSD921 EDS271
EDSC2190 DSD921 EDSC271
EDS2184-S769-EM-SP DSD918-S769-EM-SP EDS271 Emergency Stop Legend included
EDSC2184-S769-EM-SP DSD918-S769-EM-SP EDSC271 Emergency Stop Legend included
EDS2284 (2) DSD918 EDS272
EDSC2284 (2) DSD918 EDSC272

4C
EDS225 (2) DSD922 EDS272 Start/ Stop Legend included
EDSC225 (2) DSD922 EDSC272 Start/ Stop Legend included
EDS2290 (2) DSD921 EDS272
EDSC2290 (2) DSD921 EDSC272
PILOT LIGHTS
EFS21524-J* DSD948-J* EDS271 †
* Insert pilot light color
EFSC21524-J* DSD948-J* EDSC271 †
† When using the EFS Series pilot light in Cl. I, Div. 1, Group B
EFS21561-J*-J* DSD947-J*-J* EDS271 †
applications, the EFS back box is required in place of the EDS.
EFSC21561-J*-J* DSD947-J*-J* EDSC271 †
PUSHBUTTON / PILOT LIGHT COMBINATIONS
EDS21473-J* DSD958-J* EDS271 * Insert pilot light color
EDSC21473-J* DSD958-J* EDSC271 * Insert pilot light color
EDS22471-J* DSD948-J* & DSD921 EDS272 * Insert pilot light color
EDSC22471-J* DSD948-J* & DSD921 EDSC272 * Insert pilot light color
EDS22868-J*-J* DSD947-J*-J* & DSD921 EDS272 * Insert pilot light color
EDSC22868-J*-J* DSD947-J*-J* & DSD921 EDSC272 * Insert pilot light color
SELECTOR SWITCHES
EDS21271 DSD923 EDS271
EDSC21271 DSD923 EDSC271
EDS21272 DSD924 EDS271
EDSC21272 DSD924 EDSC271
EDS21273 DSD925 EDS271
EDSC21273 DSD925 EDSC271
EDS21274 DSD926 EDS271
EDSC21274 DSD926 EDSC271
EDS21275 DSD927 EDS271
EDSC21275 DSD927 EDSC271
MANUAL MOTOR STARTER WITH O/L
EDS21101 DS415A & SW13 EDS271 "-W * " for heater, or "-0" distributor provided
EDSC21101 DS415A & SW13 EDSC271 "-W * " for heater, or "-0" distributor provided
EDS21102 DS415A & SW14 EDS271 "-W * " for heater, or "-0" distributor provided
EDSC21102 DS415A & SW14 EDSC271 "-W * " for heater, or "-0" distributor provided
EDS21093 DS415A & SW11 EDS271 "-G * " for heater, or "-0" distributor provided
EDSC21093 DS415A & SW11 EDSC271 "-G * " for heater, or "-0" distributor provided
EDS21094 DS415A & SW12 EDS271 "-G * " for heater, or "-0" distributor provided
EDSC21094 DS415A & SW12 EDSC271 "-G * " for heater, or "-0" distributor provided
EDS2199 DS415A & SW9 EDS271 "-P * " for heater, or "-0" distributor provided
EDSC2199 DS415A & SW9 EDSC271 "-P * " for heater, or "-0" distributor provided
EDS21100 DS415A & SW10 EDS271 "-P * " for heater, or "-0" distributor provided
EDSC21100 DS415A & SW10 EDSC271 "-P * " for heater, or "-0" distributor provided

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 539
540-541.qxp 12/16/2013 4:20 PM Page 540

4C EDS / EFS Series Control Stations For a complete list of components for
EDS & EFS Control Stations, see page 514
for FlexStation™ Series
Sub-assembly
Reference Guide

Control Stations and their Sub-assemblies

Sub-assembly
Complete Control Station Cover & Device Cast Back Box Notes and Requirements
MANUAL MOTOR STARTER
EFD218-T8 DSD916 EDS271
Alternative DS415A & SQ D 2510 KO-1 EDS271 SQ D switch provided by distributor
EFDC218-T8 DSD916 EDSC271
Alternative DS415A & SQ D 2510 KO-1 EDSC271 SQ D switch provided by distributor
EFD2419 DSD917 EDS271
Alternative DS415A & GE 2368S EDS271 GE switch provided by distributor
EFDC2419 DSD917 EDSC271
Alternative DS415A & GE 2368S EDSC271 GE switch provided by distributor
SNAP SWITCHES
EDS2129 DS652 & SW5 EDS271
Alternative DSD933 EDS271 External Sealing Fitting Required
4C

EDSC2129 DS652 & SW5 EDSC271

Alternative DSD933 EDSC271 External Sealing Fitting Required
EDS218 DS652 & SW6 EDS271
Alternative DSD634 EDS271 External Sealing Fitting Required
EDSC218 DS652 & SW6 EDSC271
Alternative DSD634 EDSC271 External Sealing Fitting Required
EDS2130 DS652 & SW7 EDS271
Alternative DSD936 EDS271 External Sealing Fitting Required
EDSC2130 DS652 & SW7 EDSC271
Alternative DSD936 EDSC271 External Sealing Fitting Required
EDS2140 DS652 & SW8 EDS271
Alternative DSD937 EDS271 External Sealing Fitting Required
EDSC2140 DS652 & SW8 EDSC271
Alternative DSD937 EDSC271 External Sealing Fitting Required
EDS2229 (2) DS652 & (2) SW5 EDS272
Alternative (2) DSD933 EDS272 External Sealing Fitting Required
EDSC2229 (2) DS652 & (2) SW5 EDSC272
Alternative (2) DSD933 EDSC272 External Sealing Fitting Required
EDSC228 (2) DS652 & (2) SW6 EDSC272
Alternative (2) DSD634 EDSC272 External Sealing Fitting Required
EDS2230 (2) DS652 & (2) SW7 EDS272
Alternative (2) DSD936 EDS272 External Sealing Fitting Required
EDSC2230 (2) DS652 & (2) SW7 EDSC272
Alternative (2) DSD936 EDSC272 External Sealing Fitting Required
EDSC2240 (2) DS652 & (2) SW8 EDSC272
Alternative (2) DSD937 EDSC272 External Sealing Fitting Required
ROCKER SWITCHES
EDS2596 DSD949 EDS271
EDSC2596 DSD949 EDSC271
EDS2162 DSD951 EDS271 Start/ Stop Legend included
EDSC2162 DSD951 EDSC271 Start/ Stop Legend included
EDS2194 DSD950 EDS271
EDSC2194 DSD950 EDSC271
EDS2696 (2) DSD949 EDS272 Start/ Stop Legend included
EDSC2696 (2) DSD949 EDSC272 Start/ Stop Legend included
EDS2262 (2) DSD951 EDS272
EDSC2262 (2) DSD951 EDSC272
EDS2294 (2) DSD950 EDS272
EDSC2294 (2) DSD950 EDSC272
Additional notes:
• See Eaton's Crouse-Hinds' installation instructions for any possible additional sealing requirements.
• Part numbers listed with 3/ 4" hub in back box (Ex. EDS2184). For 1/ 2" hub, change the "2" to "1" (EDS1184). For 1" hub, change the "2" to "3" (EDS3184).
• Control Stations with "Stop" legend have lockout provided as standard.
• Pilot Light Colors J*-- J1= Red, J3= Green, J6= Amber, J10= Clear, J11= Blue. LED pilot lights are available with LED suffix.
• Pilot Light Transformers for voltages over 125V. Suffix T2= 240/220 - 110V, T4= 480/440 - 110V, T5= 600/500 - 110V (not available on double pilot cover).
• Standard legend plate markings are available by adding nomenclature after the part number (EDS2184-Run).
• Selector switch nameplate kits available. 2-Pos = "SS2KIT", 3-Pos = "SS3KIT". See Replacement Parts book for additional information.
• Copper-free aluminum bodies and covers available with SA suffix.
• Additional control station options may be found in Section 4C.
• Group B ratings may be achieved by adding the GB suffix or using the EFS back box. See part number instructions for the item required.
• Group B ratings may already be achieved when used in Class I, Division 2 applications. See Certifications and Compliances for item required.
• Additional control station configurations available through the FlexStation Component Series.

540 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
EDS / EFS Series Cl. I, Div. 1 & 2, Groups B*, C, D Explosionproof 4C
Cl. II, Div. 1, Groups E, F, G Dust-Ignitionproof
Control Stations Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Fully Assembled EFS and NEMA 3, 7B*CD, 9EFG
EDS Factory Sealed Devices
Applications: Certifications and Compliances:
Factory sealed enclosures are installed in a rigid metallic conduit • NEC/CEC:
system for surface mounting adjacent to or remote from equipment Class I, Division 1 & 2, Groups B*, C, D
being controlled and are used: Class II, Division 1, Groups E, F, G
• To prevent arcing of enclosed device from causing ignition of a Class II, Division 2, Groups F, G
specific hazardous atmosphere or atmospheres external to the
enclosure Class III
• In industrial areas such as chemical plants, oil and gas refineries, • NEMA/EEMAC: 3, 7B*CD, 9EFG
paint and varnish manufacturing plants, gasoline bulk loading • UL Standard: 1203
terminals, grain elevators, grain processing industries, coal • CSA Standard: C22.2 No. 30
processing or handling areas, or metal handling or finishing areas
where atmosphere may contain hazardous gases and/or dust Standard Materials:
• In non-hazardous areas where sturdy, durable enclosures are
• Bodies – Feraloy® iron alloy; copper-free aluminum
required
• Front operated pushbutton and pilot light covers – Feraloy iron
• In conjunction with magnetic starters or contactors for remote
alloy
control of motors

4C
• Side operated type pushbutton covers – copper-free aluminum
Manual motor starting switch enclosures are used:
• Shafts – stainless steel
• For manual starting of small AC or DC motors
• Shaft bushings – stainless steel
• To provide manual starting and stopping and, in the case of units
with heaters, motor running protection • Rocker handle and pushbutton guards – type 6 / 6 nylon
• Sealing enclosures – copper-free aluminum

Features: Standard Finishes:

Factory sealed devices have many distinct advantages:
• Feraloy iron alloy – electrogalvanized and aluminum acrylic paint
• Reduce installation problems
• Copper-free aluminum – natural
• Eliminate external seals
• Type 6 / 6 nylon – black
• Lower installation costs
• Stainless steel – natural
• Improve safety
• Are used with general purpose snap and pushbutton type switches
• Standard neoprene covers for front operated pushbuttons. Prevents
Options:
accumulation of dirt and entrance of water around operating shafts The following special options are available from the factory by
adding suffix to Cat. #:
Description Suffix
• Mounting lugs and taper tapped hubs with integral bushings
• Momentary red emergency “STOP” button – front operated
• Large machine screws for fastening covers to bodies mushroom button, breaks normally closed contacts only...... S111
• Lockout provisions on front operated pushbutton (marked "STOP" • Lockout provision on front operated pushbutton cover
and "OFF") and selector switch covers (standard on buttons marked "OFF" and "STOP").................. S153
• Lockout hole for padlock having 1/ 4" hasp is provided when used • For 24 VDC operation on pilot lights ....................................... S300
with covers for front lever and side rocker type operation • Three-position selector switches with modified operation:
• Close tolerances in machining of wide, mating flanges and Momentary contact clockwise operation, spring return to
journalled shafts and bearings for front button operation, produces center, maintained contact counter-clockwise operation S634
flametightness of enclosure joints Momentary contact counter-clockwise operation, spring
return to center, maintained contact clockwise operation.... S635
• On enclosures with front lever and side rocker type operating • Bodies and covers (single and two gang units) – copper-free
handles, threaded type shafts and bushings are used to ensure aluminum.................................................................................. SA
flametightness • Where indicated in the catalog listings, EDS units suitable
• Dead end (EFS or EDS) or through feed (EFSC or EDSC) hubs – 1/2" for Class I, Division 1, Group B usage can be supplied, add
to 1" sizes suffix -GB, EFS units are suitable for Class I, Division 1,
• When STOP is indicated, button is automatically red. When START Group B as standard ............................................................... GB
is indicated, button is automatically green. Otherwise, black • Maintained red emergency “STOP” button with lockout –
buttons are standard. front operated mushroom button breaks normally closed
and makes normally open contacts (push to stop), lockout
standard (will not fit with a pilot light if transformer is
required) .................................................................................. S769
• Spring return to center from right and left............................... S842
EDS bodies and factory sealed cover and device sub-assemblies are
available for field assembly (see page 521).

*See suffix GB in Options section.

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2016 Eaton

526-527.qxp 12/16/2013 4:16 PM Page 526

4C EDS / EFS Series Cl. I, Div. 1 & 2, Groups B*, C, D

Cl. II, Div. 1, Groups E, F, G
Explosionproof
Dust-Ignitionproof
Control Stations Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Fully Assembled EFS and NEMA 3, 7B*CD, 9EFG
EDS Factory Sealed Devices
Methods of Factory Sealing
EFS/EDS Series EDS Series
4C

EDS factory sealed snap switches or manual motor starting switches

Factory sealed EDS and EFS pilot light, pushbutton and selector do not need external sealing. The switches are enclosed in a unique
switch control stations do not need external sealing. Device contacts sealing well with double flanges which mate with the cover and the
are factory sealed in explosionproof ESWP contact blocks. Small, body. Small, compact enclosures have accurately ground wide
compact enclosures have accurately ground wide flanges on both flanges on body, cover and sealing well for flame-tight joints. Wiring
the body and cover for a flame-tight joint. pigtails are factory sealed from under the sealing well. Reliable
pouring of seals at the factory ensures safe sealing.
Dimensions (Inches) ‡
Bodies Covers†

Hub Dim. Dim.

Size "h" "i"
1
/2 /4
3 13
/16
3
/4 /8
7 13
/16
1 1 15
/16

General use snap switch Pushbutton switch rocker type

front operated and manual side operated
Side View motor starting switch

Pushbutton switch front Selector switch

Front View - Single gang Front View - Two gang operated

*See suffix GB in Options section.

‡Dimensions are approximate, not for construction purposes.
† Surface covers have same length and width as bodies.

526 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
532-533.qxp 12/16/2013 4:17 PM Page 533

EDS / EFS Series Control Stations Cl. I, Div. 1 & 2, Groups B*, C, D
Cl. II, Div. 1, Groups E, F, G
Explosionproof
Dust-Ignitionproof
4C
Fully Assembled EDS Factory Sealed Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Selector Switches NEMA 3, 7B*CD, 9EFG
Maintained Contact, 600VAC Heavy Duty
Furnished with pushbuttons, cam actuated by a maintained contact selector mechanism to operate in the sequences shown in the diagrams
below. Specify indicating plate markings. See table
below listings.

Dimensions
see page 526

4C
EDS11273

Ordering Information - Single Gang

Enclosure with Switch
Replacement
Contact Hub Dead End Through Feed
Style Position 1 Position 2 Position 3 Blocks† Size Cat. # Cat. #

/2
1
EDS11271 ➀ EDSC11271 ➀
Two-Position, ED11 /4
3
EDS21271 ➀ EDSC21271 ➀
Two-Circuit 1 EDS31271 ➀ EDSC31271 ➀

/2
1
EDS11272 ➀ EDSC11272 ➀
Two-Position, ED12 /4
3
EDS21272 ➀ EDSC21272 ➀
Four-Circuit 1 EDS31272 ➀ EDSC31272 ➀

/2
1
EDS11273 ➀ EDSC11273 ➀
Three-Position, ED11 /4
3
EDS21273 ➀ EDSC21273 ➀
Two-Circuit ‡ 1 EDS31273 ➀ EDSC31273 ➀

/2
1
EDS11274 ➀ EDSC11274 ➀
ED12 /4
3
EDS21274 ➀ EDSC21274 ➀
1 EDS31274 ➀ EDSC31274 ➀
Three-Position,
Four-Circuit ‡ /2
1
EDS11275 ➀ EDSC11275 ➀
ED12 /4
3
EDS21275 ➀ EDSC21275 ➀
1 EDS31275 ➀ EDSC31275 ➀

➀ If desired, markings on indicating plates may be added to catalog

number. Select from the list of standard markings below:
Two-Position Three-Position
RUN, JOG FAST, SLOW IN, OUT RUN, OFF, JOG 1, OFF, 2
HAND, AUTOMATIC OPEN, CLOSE RAISE, LOWER HAND, OFF, AUTOMATIC OPEN, OFF, CLOSE
FORWARD, REVERSE UP, DOWN START, STOP FORWARD, OFF, REVERSE UP, OFF, DOWN
ON, OFF FAST, OFF, SLOW

*For Class I, Group B: Consider using EFS series selector switches, see page 534. All enclosures listed above can be modified for Class I, Group B, Div. 1 usage. Add suffix GB
to the Cat. No. Seals must be installed within 11/ 2" of each conduit opening in Division 1. These products are suitable for Group B, Div. 2 as listed, without external seals. In Canada, for
Group B applications consult factory.
† For replacement contact blocks, see page 571.
‡ Suffixes S634 or S635 may be used on these catalog numbers. See page 525 for explanation of options.

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 533
534-535.qxp 12/16/2013 4:18 PM Page 534

4C EDS / EFS Series Control Stations Cl. I, Div. 1 & 2, Groups B*, C, D
Cl. II, Div. 1, Groups E, F, G
Explosionproof
Dust-Ignitionproof
Fully Assembled EFS Factory Sealed Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Selector Switches NEMA 3, 7B*CD, 9EFG
Maintained Contact, 600VAC Heavy Duty
Furnished with pushbuttons, cam actuated by a maintained contact selector mechanism to operate in the sequences shown in the
diagrams below. Specify indicating plate markings. See table below listings.

Dimensions
see page 526

EFS11273
4C

Ordering Information - Single Gang

Enclosure with Switch
Replacement
Contact Hub Dead End Through Feed
Style Position 1 Position 2 Position 3 Blocks† Size Cat. # Cat. #
/2
1
EFS11271 ➀ EFSC11271 ➀
Two-Position, ED11 /4
3
EFS21271 ➀ EFSC21271 ➀
Two-Circuit 1 EFS31271 ➀ EFSC31271 ➀

/2
1
EFS11272 ➀ EFSC11272 ➀
Two-Position, ED12 /4
3
EFS21272 ➀ EFSC21272 ➀
Four-Circuit 1 EFS31272 ➀ EFSC31272 ➀

/2
1
EFS11273 ➀ EFSC11273 ➀
Three-Position, ED11 /4
3
EFS21273 ➀ EFSC21273 ➀
Two-Circuit ‡ 1 EFS31273 ➀ EFSC31273 ➀

/2
1
EFS11274 ➀ EFSC11274 ➀
ED12 /4
3
EFS21274 ➀ EFSC21274 ➀
1 EFS31274 ➀ EFSC31274 ➀
Three-Position,
Four-Circuit ‡ /2
1
EFS11275 ➀ EFSC11275 ➀
ED12 /4
3
EFS21275 ➀ EFSC21275 ➀
1 EFS31275 ➀ EFSC31275 ➀

➀If desired, markings on indicating plates may be added to catalog

number. Select from the list of standard markings below:
Two-Position Three-Position
RUN, JOG FAST, SLOW IN, OUT RUN, OFF, JOG 1, OFF, 2
HAND, AUTOMATIC OPEN, CLOSE RAISE, LOWER HAND, OFF, AUTOMATIC OPEN, OFF, CLOSE
FORWARD, REVERSE UP, DOWN START, STOP FORWARD, OFF, REVERSE UP, OFF, DOWN
ON, OFF FAST, OFF, SLOW

*Class I, Group B: All enclosures listed above are suitable for Class I, Group B, Div. 1 usage. Seals only have to be installed on 1 inch conduit within 5 ft. in Division 1.
† For replacement contact blocks, see page 571.
‡ Suffixes S634 or S635 may be used on these catalog numbers. See page 525 for explanation of options.

534 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
538-539.qxp 12/16/2013 4:20 PM Page 539

EDS / EFS Series For a complete list of components for EDS & 4C
EFS Control Stations, see page 514 for
Control Stations FlexStation™ Series
Sub-assembly Reference Guide

Control Stations and their Sub-assemblies

Complete Control Sub-assembly
Station Cover & Device Cast Back Box Notes and Requirements
PUSHBUTTONS
EDS2184 DSD918 EDS271
EDSC2184 DSD918 EDSC271
EDS215 DSD922 EDS271 Start/ Stop Legend included
EDSC215 DSD922 EDSC271 Start/ Stop Legend included
EDS2190 DSD921 EDS271
EDSC2190 DSD921 EDSC271
EDS2184-S769-EM-SP DSD918-S769-EM-SP EDS271 Emergency Stop Legend included
EDSC2184-S769-EM-SP DSD918-S769-EM-SP EDSC271 Emergency Stop Legend included
EDS2284 (2) DSD918 EDS272
EDSC2284 (2) DSD918 EDSC272

4C
EDS225 (2) DSD922 EDS272 Start/ Stop Legend included
EDSC225 (2) DSD922 EDSC272 Start/ Stop Legend included
EDS2290 (2) DSD921 EDS272
EDSC2290 (2) DSD921 EDSC272
PILOT LIGHTS
EFS21524-J* DSD948-J* EDS271 †
* Insert pilot light color
EFSC21524-J* DSD948-J* EDSC271 †
† When using the EFS Series pilot light in Cl. I, Div. 1, Group B
EFS21561-J*-J* DSD947-J*-J* EDS271 †
applications, the EFS back box is required in place of the EDS.
EFSC21561-J*-J* DSD947-J*-J* EDSC271 †
PUSHBUTTON / PILOT LIGHT COMBINATIONS
EDS21473-J* DSD958-J* EDS271 * Insert pilot light color
EDSC21473-J* DSD958-J* EDSC271 * Insert pilot light color
EDS22471-J* DSD948-J* & DSD921 EDS272 * Insert pilot light color
EDSC22471-J* DSD948-J* & DSD921 EDSC272 * Insert pilot light color
EDS22868-J*-J* DSD947-J*-J* & DSD921 EDS272 * Insert pilot light color
EDSC22868-J*-J* DSD947-J*-J* & DSD921 EDSC272 * Insert pilot light color
SELECTOR SWITCHES
EDS21271 DSD923 EDS271
EDSC21271 DSD923 EDSC271
EDS21272 DSD924 EDS271
EDSC21272 DSD924 EDSC271
EDS21273 DSD925 EDS271
EDSC21273 DSD925 EDSC271
EDS21274 DSD926 EDS271
EDSC21274 DSD926 EDSC271
EDS21275 DSD927 EDS271
EDSC21275 DSD927 EDSC271
MANUAL MOTOR STARTER WITH O/L
EDS21101 DS415A & SW13 EDS271 "-W * " for heater, or "-0" distributor provided
EDSC21101 DS415A & SW13 EDSC271 "-W * " for heater, or "-0" distributor provided
EDS21102 DS415A & SW14 EDS271 "-W * " for heater, or "-0" distributor provided
EDSC21102 DS415A & SW14 EDSC271 "-W * " for heater, or "-0" distributor provided
EDS21093 DS415A & SW11 EDS271 "-G * " for heater, or "-0" distributor provided
EDSC21093 DS415A & SW11 EDSC271 "-G * " for heater, or "-0" distributor provided
EDS21094 DS415A & SW12 EDS271 "-G * " for heater, or "-0" distributor provided
EDSC21094 DS415A & SW12 EDSC271 "-G * " for heater, or "-0" distributor provided
EDS2199 DS415A & SW9 EDS271 "-P * " for heater, or "-0" distributor provided
EDSC2199 DS415A & SW9 EDSC271 "-P * " for heater, or "-0" distributor provided
EDS21100 DS415A & SW10 EDS271 "-P * " for heater, or "-0" distributor provided
EDSC21100 DS415A & SW10 EDSC271 "-P * " for heater, or "-0" distributor provided

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 539
540-541.qxp 12/16/2013 4:20 PM Page 540

4C EDS / EFS Series Control Stations For a complete list of components for
EDS & EFS Control Stations, see page 514
for FlexStation™ Series
Sub-assembly
Reference Guide

Control Stations and their Sub-assemblies

Sub-assembly
Complete Control Station Cover & Device Cast Back Box Notes and Requirements
MANUAL MOTOR STARTER
EFD218-T8 DSD916 EDS271
Alternative DS415A & SQ D 2510 KO-1 EDS271 SQ D switch provided by distributor
EFDC218-T8 DSD916 EDSC271
Alternative DS415A & SQ D 2510 KO-1 EDSC271 SQ D switch provided by distributor
EFD2419 DSD917 EDS271
Alternative DS415A & GE 2368S EDS271 GE switch provided by distributor
EFDC2419 DSD917 EDSC271
Alternative DS415A & GE 2368S EDSC271 GE switch provided by distributor
SNAP SWITCHES
EDS2129 DS652 & SW5 EDS271
Alternative DSD933 EDS271 External Sealing Fitting Required
4C

EDSC2129 DS652 & SW5 EDSC271

Alternative DSD933 EDSC271 External Sealing Fitting Required
EDS218 DS652 & SW6 EDS271
Alternative DSD634 EDS271 External Sealing Fitting Required
EDSC218 DS652 & SW6 EDSC271
Alternative DSD634 EDSC271 External Sealing Fitting Required
EDS2130 DS652 & SW7 EDS271
Alternative DSD936 EDS271 External Sealing Fitting Required
EDSC2130 DS652 & SW7 EDSC271
Alternative DSD936 EDSC271 External Sealing Fitting Required
EDS2140 DS652 & SW8 EDS271
Alternative DSD937 EDS271 External Sealing Fitting Required
EDSC2140 DS652 & SW8 EDSC271
Alternative DSD937 EDSC271 External Sealing Fitting Required
EDS2229 (2) DS652 & (2) SW5 EDS272
Alternative (2) DSD933 EDS272 External Sealing Fitting Required
EDSC2229 (2) DS652 & (2) SW5 EDSC272
Alternative (2) DSD933 EDSC272 External Sealing Fitting Required
EDSC228 (2) DS652 & (2) SW6 EDSC272
Alternative (2) DSD634 EDSC272 External Sealing Fitting Required
EDS2230 (2) DS652 & (2) SW7 EDS272
Alternative (2) DSD936 EDS272 External Sealing Fitting Required
EDSC2230 (2) DS652 & (2) SW7 EDSC272
Alternative (2) DSD936 EDSC272 External Sealing Fitting Required
EDSC2240 (2) DS652 & (2) SW8 EDSC272
Alternative (2) DSD937 EDSC272 External Sealing Fitting Required
ROCKER SWITCHES
EDS2596 DSD949 EDS271
EDSC2596 DSD949 EDSC271
EDS2162 DSD951 EDS271 Start/ Stop Legend included
EDSC2162 DSD951 EDSC271 Start/ Stop Legend included
EDS2194 DSD950 EDS271
EDSC2194 DSD950 EDSC271
EDS2696 (2) DSD949 EDS272 Start/ Stop Legend included
EDSC2696 (2) DSD949 EDSC272 Start/ Stop Legend included
EDS2262 (2) DSD951 EDS272
EDSC2262 (2) DSD951 EDSC272
EDS2294 (2) DSD950 EDS272
EDSC2294 (2) DSD950 EDSC272
Additional notes:
• See Eaton's Crouse-Hinds' installation instructions for any possible additional sealing requirements.
• Part numbers listed with 3/ 4" hub in back box (Ex. EDS2184). For 1/ 2" hub, change the "2" to "1" (EDS1184). For 1" hub, change the "2" to "3" (EDS3184).
• Control Stations with "Stop" legend have lockout provided as standard.
• Pilot Light Colors J*-- J1= Red, J3= Green, J6= Amber, J10= Clear, J11= Blue. LED pilot lights are available with LED suffix.
• Pilot Light Transformers for voltages over 125V. Suffix T2= 240/220 - 110V, T4= 480/440 - 110V, T5= 600/500 - 110V (not available on double pilot cover).
• Standard legend plate markings are available by adding nomenclature after the part number (EDS2184-Run).
• Selector switch nameplate kits available. 2-Pos = "SS2KIT", 3-Pos = "SS3KIT". See Replacement Parts book for additional information.
• Copper-free aluminum bodies and covers available with SA suffix.
• Additional control station options may be found in Section 4C.
• Group B ratings may be achieved by adding the GB suffix or using the EFS back box. See part number instructions for the item required.
• Group B ratings may already be achieved when used in Class I, Division 2 applications. See Certifications and Compliances for item required.
• Additional control station configurations available through the FlexStation Component Series.

540 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
EDS / EFS Series Cl. I, Div. 1 & 2, Groups B*, C, D Explosionproof 4C
Cl. II, Div. 1, Groups E, F, G Dust-Ignitionproof
Control Stations Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Fully Assembled EFS and NEMA 3, 7B*CD, 9EFG
EDS Factory Sealed Devices
Applications: Certifications and Compliances:
Factory sealed enclosures are installed in a rigid metallic conduit • NEC/CEC:
system for surface mounting adjacent to or remote from equipment Class I, Division 1 & 2, Groups B*, C, D
being controlled and are used: Class II, Division 1, Groups E, F, G
• To prevent arcing of enclosed device from causing ignition of a Class II, Division 2, Groups F, G
specific hazardous atmosphere or atmospheres external to the
enclosure Class III
• In industrial areas such as chemical plants, oil and gas refineries, • NEMA/EEMAC: 3, 7B*CD, 9EFG
paint and varnish manufacturing plants, gasoline bulk loading • UL Standard: 1203
terminals, grain elevators, grain processing industries, coal • CSA Standard: C22.2 No. 30
processing or handling areas, or metal handling or finishing areas
where atmosphere may contain hazardous gases and/or dust Standard Materials:
• In non-hazardous areas where sturdy, durable enclosures are
• Bodies – Feraloy® iron alloy; copper-free aluminum
required
• Front operated pushbutton and pilot light covers – Feraloy iron
• In conjunction with magnetic starters or contactors for remote
alloy
control of motors

4C
• Side operated type pushbutton covers – copper-free aluminum
Manual motor starting switch enclosures are used:
• Shafts – stainless steel
• For manual starting of small AC or DC motors
• Shaft bushings – stainless steel
• To provide manual starting and stopping and, in the case of units
with heaters, motor running protection • Rocker handle and pushbutton guards – type 6 / 6 nylon
• Sealing enclosures – copper-free aluminum

Features: Standard Finishes:

Factory sealed devices have many distinct advantages:
• Feraloy iron alloy – electrogalvanized and aluminum acrylic paint
• Reduce installation problems
• Copper-free aluminum – natural
• Eliminate external seals
• Type 6 / 6 nylon – black
• Lower installation costs
• Stainless steel – natural
• Improve safety
• Are used with general purpose snap and pushbutton type switches
• Standard neoprene covers for front operated pushbuttons. Prevents
Options:
accumulation of dirt and entrance of water around operating shafts The following special options are available from the factory by
adding suffix to Cat. #:
Description Suffix
• Mounting lugs and taper tapped hubs with integral bushings
• Momentary red emergency “STOP” button – front operated
• Large machine screws for fastening covers to bodies mushroom button, breaks normally closed contacts only...... S111
• Lockout provisions on front operated pushbutton (marked "STOP" • Lockout provision on front operated pushbutton cover
and "OFF") and selector switch covers (standard on buttons marked "OFF" and "STOP").................. S153
• Lockout hole for padlock having 1/ 4" hasp is provided when used • For 24 VDC operation on pilot lights ....................................... S300
with covers for front lever and side rocker type operation • Three-position selector switches with modified operation:
• Close tolerances in machining of wide, mating flanges and Momentary contact clockwise operation, spring return to
journalled shafts and bearings for front button operation, produces center, maintained contact counter-clockwise operation S634
flametightness of enclosure joints Momentary contact counter-clockwise operation, spring
return to center, maintained contact clockwise operation.... S635
• On enclosures with front lever and side rocker type operating • Bodies and covers (single and two gang units) – copper-free
handles, threaded type shafts and bushings are used to ensure aluminum.................................................................................. SA
flametightness • Where indicated in the catalog listings, EDS units suitable
• Dead end (EFS or EDS) or through feed (EFSC or EDSC) hubs – 1/2" for Class I, Division 1, Group B usage can be supplied, add
to 1" sizes suffix -GB, EFS units are suitable for Class I, Division 1,
• When STOP is indicated, button is automatically red. When START Group B as standard ............................................................... GB
is indicated, button is automatically green. Otherwise, black • Maintained red emergency “STOP” button with lockout –
buttons are standard. front operated mushroom button breaks normally closed
and makes normally open contacts (push to stop), lockout
standard (will not fit with a pilot light if transformer is
required) .................................................................................. S769
• Spring return to center from right and left............................... S842
EDS bodies and factory sealed cover and device sub-assemblies are
available for field assembly (see page 521).

*See suffix GB in Options section.

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2016 Eaton

526-527.qxp 12/16/2013 4:16 PM Page 526

4C EDS / EFS Series Cl. I, Div. 1 & 2, Groups B*, C, D

Cl. II, Div. 1, Groups E, F, G
Explosionproof
Dust-Ignitionproof
Control Stations Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Fully Assembled EFS and NEMA 3, 7B*CD, 9EFG
EDS Factory Sealed Devices
Methods of Factory Sealing
EFS/EDS Series EDS Series
4C

EDS factory sealed snap switches or manual motor starting switches

Factory sealed EDS and EFS pilot light, pushbutton and selector do not need external sealing. The switches are enclosed in a unique
switch control stations do not need external sealing. Device contacts sealing well with double flanges which mate with the cover and the
are factory sealed in explosionproof ESWP contact blocks. Small, body. Small, compact enclosures have accurately ground wide
compact enclosures have accurately ground wide flanges on both flanges on body, cover and sealing well for flame-tight joints. Wiring
the body and cover for a flame-tight joint. pigtails are factory sealed from under the sealing well. Reliable
pouring of seals at the factory ensures safe sealing.
Dimensions (Inches) ‡
Bodies Covers†

Hub Dim. Dim.

Size "h" "i"
1
/2 /4
3 13
/16
3
/4 /8
7 13
/16
1 1 15
/16

General use snap switch Pushbutton switch rocker type

front operated and manual side operated
Side View motor starting switch

Pushbutton switch front Selector switch

Front View - Single gang Front View - Two gang operated

*See suffix GB in Options section.

‡Dimensions are approximate, not for construction purposes.
† Surface covers have same length and width as bodies.

526 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
530-531.qxp 12/16/2013 4:16 PM Page 530

4C EDS / EFS Series Cl. I, Div. 1 & 2, Groups B*, C, D Explosionproof

Cl. II, Div. 1, Groups E, F, G Dust-Ignitionproof
Control Stations Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Fully Assembled EFS Pilot Lights
NEMA 3, 7B*CD, 9EFG

Applications:
EFS pilot lights are used:
• In areas which are hazardous due to the presence of flammable
vapors, gases or highly combustible dusts
• For installation at petroleum refineries, chemical and
petrochemical plants and other process industry facilities where
similar hazards exist
• To visually indicate at a remote location that the desired function
is being performed

Features:
• Small, compact enclosures with accurately ground flange on both
body and cover for flame-tight joint
• Pilot lights are factory sealed. Conventional external seals
are not required
4C

• Dead end (EFS) or through feed (EFSC) hubs – 1/2" to 1" sizes Options:
The following special options are available from factory by adding
suffix to Cat. #:
Certifications and Compliances: Description Suffix
• NEC/CEC: Pilot lights for circuit voltages up to 600 volts maximum
Class I, Groups B*, C, D (standard voltage range 110–125) – See Listings
Class II, Groups E, F, G
LED pilot lights in place of standard incandescent pilot lamps LED
Class III
• NEMA/EEMAC: 3, 7B*CD, 9EFG Bodies and covers – copper-free aluminum SA
• UL Standard: 1203
24 VDC operation on pilot lights S300
• CSA Standard: C22.2

Standard Materials:
• Bodies – Feraloy® iron alloy (U.S.) and copper-free aluminum
(Canada)
• Pilot light covers – Feraloy iron alloy
• Operating shafts – stainless steel

Standard Finishes:
• Feraloy iron alloy – electrogalvanized with aluminum acrylic paint
• Copper-free aluminum – natural
• Stainless steel – natural

Electrical Rating Range:

• Pilot lights – 110 to 600VAC
* External conduit seal required for 1 inch hub size in Division 1, Group B
within 5 feet (1.5 meters) of enclosure.

530 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business
530-531.qxp 12/16/2013 4:16 PM Page 531

EDS / EFS Series Cl. I, Div. 1 & 2, Groups B*, C, D Explosionproof 4C

Cl. II, Div. 1, Groups E, F, G Dust-Ignitionproof
Control Stations Cl. II, Div. 2, Groups F, G Raintight
Cl. III Wet Locations
Fully Assembled EFS Pilot Lights
NEMA 3, 7B*CD, 9EFG

Pilot lights listed below are factory sealed and do not require external Transformer Voltages Above 125
seals*. Lamps are 6 watt, miniature bayonets, incandescent lamps
Nominal Volts Primary
for use on 110–125 volt circuits. 50–60 Hertz Voltage Cat. #
LED pilot lights can be provided in place of standard incandescent Transformer Range Suffix
lamps by adding suffix LED after the color symbols. For Options 220 / 110 220–240 T2
see pages 530–531. 440 / 110 440–480 T4
Enclosures with single pilot covers only can be equipped with a 550 / 110 550–600 T5
transformer for each lamp for high voltages as shown.

Ordering Information
Enclosure with Single Pilot Light‡
Hub Size Dead End Cat. # Through Feed Cat. #
1
/2 EFS11524 ➀ EFSC11524 ➀
3
/4 EFS21524 ➀ EFSC21524 ➀
1 EFS31524 ➀ EFSC31524 ➀

4C
Enclosure with Double Pilot Lights‡
Hub Size Dead End Cat. # Through Feed Cat. #
1
/2 EFS11561 ➀ EFSC11561 ➀
3
/4 EFS21561 ➀ EFSC21561 ➀
1 EFS31561 ➀ EFSC31561 ➀

➀ Add color symbol for each pilot light from table below. Example: EFS11561 with red and green lights is EFS11561-J1-J3
Color Symbol Color Symbol Color Symbol
Red J1 Amber J6 Blue J11
Green J3 Clear J10

Dimensions
In Inches:

Typical body side view Front view Cover †

Dimensions are approximate, not for construction purposes.

Hub Size Dim. "h" Dim. "i"

1
/2 3
/4 13
/16
3
/4 7
/8 13
/16
1 1 15
/16
* External conduit seal required for 1 inch hub size in Division 1, Group B within 5 feet
(1.5 meters) of enclosure.
‡ LED pilot lights can be furnished in place of standard incandescent pilot lamps.
Add suffix LED to catalog number after color symbol.
† Surface covers have same length and width dimensions as bodies.

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 531
538-539.qxp 12/16/2013 4:20 PM Page 539

EDS / EFS Series For a complete list of components for EDS & 4C
EFS Control Stations, see page 514 for
Control Stations FlexStation™ Series
Sub-assembly Reference Guide

Control Stations and their Sub-assemblies

Complete Control Sub-assembly
Station Cover & Device Cast Back Box Notes and Requirements
PUSHBUTTONS
EDS2184 DSD918 EDS271
EDSC2184 DSD918 EDSC271
EDS215 DSD922 EDS271 Start/ Stop Legend included
EDSC215 DSD922 EDSC271 Start/ Stop Legend included
EDS2190 DSD921 EDS271
EDSC2190 DSD921 EDSC271
EDS2184-S769-EM-SP DSD918-S769-EM-SP EDS271 Emergency Stop Legend included
EDSC2184-S769-EM-SP DSD918-S769-EM-SP EDSC271 Emergency Stop Legend included
EDS2284 (2) DSD918 EDS272
EDSC2284 (2) DSD918 EDSC272

4C
EDS225 (2) DSD922 EDS272 Start/ Stop Legend included
EDSC225 (2) DSD922 EDSC272 Start/ Stop Legend included
EDS2290 (2) DSD921 EDS272
EDSC2290 (2) DSD921 EDSC272
PILOT LIGHTS
EFS21524-J* DSD948-J* EDS271 †
* Insert pilot light color
EFSC21524-J* DSD948-J* EDSC271 †
† When using the EFS Series pilot light in Cl. I, Div. 1, Group B
EFS21561-J*-J* DSD947-J*-J* EDS271 †
applications, the EFS back box is required in place of the EDS.
EFSC21561-J*-J* DSD947-J*-J* EDSC271 †
PUSHBUTTON / PILOT LIGHT COMBINATIONS
EDS21473-J* DSD958-J* EDS271 * Insert pilot light color
EDSC21473-J* DSD958-J* EDSC271 * Insert pilot light color
EDS22471-J* DSD948-J* & DSD921 EDS272 * Insert pilot light color
EDSC22471-J* DSD948-J* & DSD921 EDSC272 * Insert pilot light color
EDS22868-J*-J* DSD947-J*-J* & DSD921 EDS272 * Insert pilot light color
EDSC22868-J*-J* DSD947-J*-J* & DSD921 EDSC272 * Insert pilot light color
SELECTOR SWITCHES
EDS21271 DSD923 EDS271
EDSC21271 DSD923 EDSC271
EDS21272 DSD924 EDS271
EDSC21272 DSD924 EDSC271
EDS21273 DSD925 EDS271
EDSC21273 DSD925 EDSC271
EDS21274 DSD926 EDS271
EDSC21274 DSD926 EDSC271
EDS21275 DSD927 EDS271
EDSC21275 DSD927 EDSC271
MANUAL MOTOR STARTER WITH O/L
EDS21101 DS415A & SW13 EDS271 "-W * " for heater, or "-0" distributor provided
EDSC21101 DS415A & SW13 EDSC271 "-W * " for heater, or "-0" distributor provided
EDS21102 DS415A & SW14 EDS271 "-W * " for heater, or "-0" distributor provided
EDSC21102 DS415A & SW14 EDSC271 "-W * " for heater, or "-0" distributor provided
EDS21093 DS415A & SW11 EDS271 "-G * " for heater, or "-0" distributor provided
EDSC21093 DS415A & SW11 EDSC271 "-G * " for heater, or "-0" distributor provided
EDS21094 DS415A & SW12 EDS271 "-G * " for heater, or "-0" distributor provided
EDSC21094 DS415A & SW12 EDSC271 "-G * " for heater, or "-0" distributor provided
EDS2199 DS415A & SW9 EDS271 "-P * " for heater, or "-0" distributor provided
EDSC2199 DS415A & SW9 EDSC271 "-P * " for heater, or "-0" distributor provided
EDS21100 DS415A & SW10 EDS271 "-P * " for heater, or "-0" distributor provided
EDSC21100 DS415A & SW10 EDSC271 "-P * " for heater, or "-0" distributor provided

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 539
540-541.qxp 12/16/2013 4:20 PM Page 540

4C EDS / EFS Series Control Stations For a complete list of components for
EDS & EFS Control Stations, see page 514
for FlexStation™ Series
Sub-assembly
Reference Guide

Control Stations and their Sub-assemblies

Sub-assembly
Complete Control Station Cover & Device Cast Back Box Notes and Requirements
MANUAL MOTOR STARTER
EFD218-T8 DSD916 EDS271
Alternative DS415A & SQ D 2510 KO-1 EDS271 SQ D switch provided by distributor
EFDC218-T8 DSD916 EDSC271
Alternative DS415A & SQ D 2510 KO-1 EDSC271 SQ D switch provided by distributor
EFD2419 DSD917 EDS271
Alternative DS415A & GE 2368S EDS271 GE switch provided by distributor
EFDC2419 DSD917 EDSC271
Alternative DS415A & GE 2368S EDSC271 GE switch provided by distributor
SNAP SWITCHES
EDS2129 DS652 & SW5 EDS271
Alternative DSD933 EDS271 External Sealing Fitting Required
4C

EDSC2129 DS652 & SW5 EDSC271

Alternative DSD933 EDSC271 External Sealing Fitting Required
EDS218 DS652 & SW6 EDS271
Alternative DSD634 EDS271 External Sealing Fitting Required
EDSC218 DS652 & SW6 EDSC271
Alternative DSD634 EDSC271 External Sealing Fitting Required
EDS2130 DS652 & SW7 EDS271
Alternative DSD936 EDS271 External Sealing Fitting Required
EDSC2130 DS652 & SW7 EDSC271
Alternative DSD936 EDSC271 External Sealing Fitting Required
EDS2140 DS652 & SW8 EDS271
Alternative DSD937 EDS271 External Sealing Fitting Required
EDSC2140 DS652 & SW8 EDSC271
Alternative DSD937 EDSC271 External Sealing Fitting Required
EDS2229 (2) DS652 & (2) SW5 EDS272
Alternative (2) DSD933 EDS272 External Sealing Fitting Required
EDSC2229 (2) DS652 & (2) SW5 EDSC272
Alternative (2) DSD933 EDSC272 External Sealing Fitting Required
EDSC228 (2) DS652 & (2) SW6 EDSC272
Alternative (2) DSD634 EDSC272 External Sealing Fitting Required
EDS2230 (2) DS652 & (2) SW7 EDS272
Alternative (2) DSD936 EDS272 External Sealing Fitting Required
EDSC2230 (2) DS652 & (2) SW7 EDSC272
Alternative (2) DSD936 EDSC272 External Sealing Fitting Required
EDSC2240 (2) DS652 & (2) SW8 EDSC272
Alternative (2) DSD937 EDSC272 External Sealing Fitting Required
ROCKER SWITCHES
EDS2596 DSD949 EDS271
EDSC2596 DSD949 EDSC271
EDS2162 DSD951 EDS271 Start/ Stop Legend included
EDSC2162 DSD951 EDSC271 Start/ Stop Legend included
EDS2194 DSD950 EDS271
EDSC2194 DSD950 EDSC271
EDS2696 (2) DSD949 EDS272 Start/ Stop Legend included
EDSC2696 (2) DSD949 EDSC272 Start/ Stop Legend included
EDS2262 (2) DSD951 EDS272
EDSC2262 (2) DSD951 EDSC272
EDS2294 (2) DSD950 EDS272
EDSC2294 (2) DSD950 EDSC272
Additional notes:
• See Eaton's Crouse-Hinds' installation instructions for any possible additional sealing requirements.
• Part numbers listed with 3/ 4" hub in back box (Ex. EDS2184). For 1/ 2" hub, change the "2" to "1" (EDS1184). For 1" hub, change the "2" to "3" (EDS3184).
• Control Stations with "Stop" legend have lockout provided as standard.
• Pilot Light Colors J*-- J1= Red, J3= Green, J6= Amber, J10= Clear, J11= Blue. LED pilot lights are available with LED suffix.
• Pilot Light Transformers for voltages over 125V. Suffix T2= 240/220 - 110V, T4= 480/440 - 110V, T5= 600/500 - 110V (not available on double pilot cover).
• Standard legend plate markings are available by adding nomenclature after the part number (EDS2184-Run).
• Selector switch nameplate kits available. 2-Pos = "SS2KIT", 3-Pos = "SS3KIT". See Replacement Parts book for additional information.
• Copper-free aluminum bodies and covers available with SA suffix.
• Additional control station options may be found in Section 4C.
• Group B ratings may be achieved by adding the GB suffix or using the EFS back box. See part number instructions for the item required.
• Group B ratings may already be achieved when used in Class I, Division 2 applications. See Certifications and Compliances for item required.
• Additional control station configurations available through the FlexStation Component Series.

540 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business