CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY

TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

CAO/C acting for and on behalf of The President of India invites E-Tenders against Tender No CEC-BSP-21-22-07 Closing Date/Time
06/09/2021 15:00 Hrs. Bidders will be able to submit their original/revised bids upto closing date and time only. Manual offers are not
allowed against this tender, and any such manual offer received shall be ignored.

Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through only
payment modes available on IREPS portal like net banking, debit card, credit card etc. Manual payments through Demand draft, Banker
cheque, Deposit receipts, FDR etc. are not allowed.

1. NIT HEADER

Construction of P.Way office & store, quarters, retaining wall, compound wall, drainage, etc.,
at different locations between Chhindwara and Nainpur, second entry building, circulating
area, drainage, etc., at Seoni including allied works like internal electrical works, and
Name of Work
execution of miscellaneous works for compliance of CRS observations between Chhindwara
and Nainpur stations in connection with Gauge Conversion between Chhindwara - Nainpur
of Nagpur Division of SEC Railway
Bidding type Normal Tender
Tender Type Open Bidding System Two Packet System
Tender Closing Date Time 06/09/2021 15:00 Date Time Of Uploading Tender 06/08/2021 17:49
Pre-Bid Conference
No Pre-Bid Conference Date Time Not Applicable
Required
Advertised Value 314838996.49 Tendering Section CE/CON/I
Bidding Style Single Rate for Each Schedule Bidding Unit
Earnest Money /Bid Security
0.00 Validity of Offer ( Days) 60
(Rs.)
Obtain Bid Security Declaration in lieu of Bid Security Yes
Tender Doc. Cost (Rs.) 0.00 Period of Completion 8 Months
Contract Type Works Contract Category Expenditure
Are Joint Venture (JV) firms
Bidding Start Date 23/08/2021 Yes
allowed to bid
Ranking Order For Bids Lowest to Highest Expenditure Type Capital (Works)

2. SCHEDULE

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Code
Schedule 1-Execution of All Works As Detailed In Schedule '1' (Design & Drwaing - NS Above/
766360.00
Items) Below/Par
1 1.00 Lumpsum 476000.00 476000.00 AT Par 476000.00
1 Description:- Providing and submission of Architectural plan and drawing for second entry building and its
circulating area at Seoni, including incidental works like retaining wall, drainage, etc
2 1.00 Lumpsum 238000.00 238000.00 AT Par 238000.00
2 Description:- Providing and submissionn of Structural design and drawing for second entry building and its
circulating area at Seoni, including incidental works like retaining wall, drainage, etc
3 1.00 Lumpsum 52360.00 52360.00 AT Par 52360.00
3
Description:- Proof Checking of drawings from IIT/ NIT/ Govt Engg. Colleges and to be approved by Railway

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule 2-Execution of All Works As Detailed In Schedule '2' (Works under chapter-19 Above/
9760603.95
of USSOR-10) Below/Par
192011 2400.00 cum 190.93 458232.00 50.00 687348.00
Description:- Earth work in excavation for foundations and floors of the bridges, retaining walls etc., including
1 setting out, dressing of sides, ramming of bottom, getting out the excavated material, back filling in layers with
approved material and consolidation of the layers by ramming and watering etc. incl. all lift, disposal of surplus
soil upto a lead of 300 M, all types of shoring and strutting with all labour and material complete as per drawing
and technical specification as directed by Engineer in charge All kinds of soils
192030 178.00 cum 1373.17 244424.26 50.00 366636.39
Description:- Providing and laying Plain Cement Concrete 1:3:6 with graded stone aggregate of 40 mm nominal
2 size, in foundation and floors, retaining walls of bridges including mechanical mixing, vibrating, pumping and
bailing out water where ever required with all materials and labour complete but excluding the cost of cement and
shuttering as per drawings and technical specifications as directed by Engineer

Pa g e 1 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

192050 1748.00 cum 1592.73 2784092.04 50.00 4176138.06

Description:- Providing and laying in position machine mixed, machine vibrated and machine batched Design
3 Mix Cement Concrete M20 grade (Cast - in Situ) using 20 mm graded crushed stone aggregate and coarse sand
of approved quality in Abutment, pier, wing walls and return walls of Mass cement concrete above RCC raft
Including finishing complete as per specifications and direction of the Engineer in charge. Payment for cement,
reinforcement and shuttering shall be paid extra
194010 800.00 cum 1592.73 1274184.00 50.00 1911276.00
Description:- Providing and laying in position machine mixed, machine vibrated and machine batched Design
Mix Cement Concrete M35 grade (Cast - in Situ) In Bottom/top slab, side walls, toe wall and sumps haunch filling
head walls or any other component using 20 mm graded crushed stone aggregate and coarse sand of approved
4 quality of cast-in-situ RCC box of size upto 5 M (bigger inside dimension) including finishing, Admixtures in
recommended proportions (as per IS 9103), if approved in Mix design, to accelerate, retard setting of concrete,
improve workability without impairing strength and durability, complete as per drawings and technical
specifications as directed by Engineer in charge. Payment for cement, reinforcement and shuttering shall be paid
extra
195031 3235.00 Sqm 120.70 390464.50 50.00 585696.75
5 Description:- Centring and shuttering including strutting, propping etc. and removal of form for : RCC raft
foundation & Pile cap
195032 6565.00 Sqm 206.50 1355672.50 50.00 2033508.75
6 Description:- Centring and shuttering including strutting, propping etc. and removal of form for : Abutment, pier,
wing walls and return walls

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule 3-Execution of All Works As Detailed In Schedule '3' (Misc works -USSOR-10) 148564138.86
Below/Par
011011 12000.00 cum 88.16 1057920.00 25.00 1322400.00
Description:- Earth work in excavation as per approved drawings and dumping at embankment site or spoil
1 heap, within railway land, including 50m lead and 1.5m lift, the lead to be measured from the centre of gravity of
excavation to centre of gravity of spoil heap: the lift to be measured from natural ground level and paid for in
layers of 1.5m each, including incidental work, as per specifications-in All kinds of soils
012010 12000.00 cum 9.20 110400.00 25.00 138000.00

2 Description:- Extra over item 011010 for excavation in foundations for buildings and bridges to cover dressing to
neat dimension and plumbing sides etc. Note : Dressing under this item is payable for the total quantity of
excavation in foundation and not partly
012040 1800.00 cum 19.60 35280.00 25.00 44100.00
3 Description:- Filling, watering and ramming earth in 15 cm layers in floors and foundations with surplus earth
from foundations including 50m lead and 1.5m lift
012050 1500.00 cum 612.39 918585.00 25.00 1148231.25
4 Description:- Supplying and filling sand in plinth and under floors including watering, ramming, consolidating and
dressing complete
031012 3000.00 cum 1539.01 4617030.00 25.00 5771287.50

5 Description:- Providing and laying in position cement concrete of specified proportion excluding cost of cement,
centering and shuttering - All works upto Plinth level : 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm
nominal size)
031051 5250.00 cum 1730.80 9086700.00 25.00 11358375.00
6 Description:- Providing and laying in position cement concrete of M 20 grade, excluding the cost of cement and
of centering and shuttering, as per direction of the Engineer in charge : All works upto Plinth level
032032 200.00 cum 2326.93 465386.00 25.00 581732.50
Description:- Providing and fixing at or near ground level, Precast M 20 grade cement concrete as per approved
7 design and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including the cost of required
centering and shuttering complete but excluding the cost of cement.(cast at site) in ash pit stones, platform coping
stones etc.
041011 3200.00 cum 1974.71 6319072.00 25.00 7898840.00
Description:- Providing and laying in position M 20 Grade concrete for reinforced concrete structural elements
but excluding cost of centering, shuttering, reinforcement and Admixtures in recommended proportion (as per
8 IS:9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as
per direction of Engineer in charge All work upto plinth level, including raft foundation of washable aprons, HS
tank, pile cap, footings of FOB, and Platform shelter etc.

Pa g e 2 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

041012 3200.00 cum 2185.37 6993184.00 25.00 8741480.00

Description:- Providing and laying in position M 20 Grade concrete for reinforced concrete structural elements
9 but excluding cost of centering, shuttering, reinforcement and Admixtures in recommended proportion (as per
IS:9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as
per direction of Engineer in charge All work in buildings above plinth level upto floor two level.
042011 2150.00 Sqm 120.70 259505.00 25.00 324381.25
10 Description:- Centering and shuttering including strutting, propping etc. and removal of form for : Foundations,
footings, bases of columns, raft foundation of washable aprons, Pile caps, Footings of FOB etc.
042012 9000.00 Sqm 206.50 1858500.00 25.00 2323125.00
11 Description:- Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any
thickness) including attached plasters, buttresses, plinth and string courses etc.
042013 6000.00 Sqm 211.62 1269720.00 25.00 1587150.00
12 Description:- Centering and shuttering including strutting, propping etc. and removal of form for : Suspended
floors, roofs, landings, balconies, FOB slabs, walkway slabs and access platform
042014 5938.00 Sqm 186.30 1106249.40 25.00 1382811.75
13 Description:- Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams,
plinth beams, bed blocks, girders, bressumers and cantilevers
042015 3900.00 Sqm 256.80 1001520.00 25.00 1251900.00
14 Description:- Centering and shuttering including strutting, propping etc. and removal of form for : Columns,
pillars, , posts and struts
042016 76.00 Sqm 229.40 17434.40 25.00 21793.00
15 Description:- Centering and shuttering including strutting, propping etc. and removal of form for : Stairs
(excluding landings) except spiral-staircases
042022 4000.00 Sqm 273.10 1092400.00 25.00 1365500.00
16 Description:- Centering and shuttering including strutting, propping etc. and removal of form for special shapes
Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
042025 3300.00 Metre 67.10 221430.00 25.00 276787.50
17 Description:- Centering and shuttering including strutting, propping etc. and removal of form for special shapes
Edges of slabs and beams in floors and walls under 20 cm wide
042029 704.00 Sqm 311.88 219563.52 25.00 274454.40
18 Description:- Centering and shuttering including strutting, propping etc. and removal of form for special shapes
Weather shade, Chajjas, corbels etc. including edges
046010 1620.00 cum 309.72 501746.40 25.00 627183.00
19
Description:- Extra for RCC work in superstructure above floor two level for every floor or part thereof.
048070 12960.00 Sqm 7.21 93441.60 25.00 116802.00
Description:- Vacuum dewatering of all types & grade concrete by mechanical means including draining out the
20 sucked excess water from concrete & then finishing the surface smooth with mechanical trowelling with suitable
equipment etc. complete. The methodology to be adopted will be as per user manual of dewatering & trawling
machine and as directed by Engineer.
051182 2869.00 Sqm 248.91 714122.79 25.00 892653.49
21 Description:- Half brick masonry with bricks of class designation 7.5 in foundations and plinth in : Cement mortar
1:4 (1 Cement : 4 coarse sand)
055074 2400.00 cum 2336.22 5606928.00 25.00 7008660.00
22 Description:- Brickwork with clay fly ash FPS bricks of class designation 75 in superstructure above plinth level
upto floor two level. In: Cement mortar 1:6 (1 cement: 6 fine sand).
072152 292.00 Sqm 1148.37 335324.04 25.00 419155.05
Description:- Providing and fixing flush door shutters to IS: 2202 Part-I non-decorative type, core of block board
23 construction with frame of 1st class hard wood and well matched commercial 3ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters 30mm thick including ISI marked stainless steel butt
hinges with necessary screws
074232 12000.00 Kg 75.02 900240.00 25.00 1125300.00
24 Description:- Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square
or round bars etc. all complete Fixed to opening/ wooden frames with rawl plugs screws etc.
074280 287.00 Each 63.57 18244.59 25.00 22805.74
Description:- Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts,
25 nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1cement: 3coarse
sand: 6graded stone aggregate 20mm nominal size)

Pa g e 3 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

077061 164.00 Each 218.77 35878.28 25.00 44847.85

26 Description:- Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc.
complete 250x10mm
077071 119.00 Each 152.74 18176.06 25.00 22720.08
27
Description:- Providing and fixing bright finished brass handles - with screws etc. complete - of size 125 mm
077072 135.00 Each 105.98 14307.30 25.00 17884.13
28
Description:- Providing and fixing bright finished brass handles - with screws etc. complete - of size 100mm
077090 18.00 Each 637.65 11477.70 25.00 14347.13
29 Description:- Providing and fixing bright finished brass 100mm mortice latch and lock with 6 levers and a pair of
lever handles with necessary screws etc. complete (best make of approved quality)
077140 18.00 Each 85.26 1534.68 25.00 1918.35
30 Description:- Providing and fixing bright finished brass hanging type floor door stopper with necessary screws
etc. complete
078072 45.00 Each 76.59 3446.55 25.00 4308.19

31 Description:- Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not
less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws
etc. complete Twin rubber stopper
078130 299.00 Metre 439.79 131497.21 25.00 164371.51
Description:- Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm,
made out of extruded 5mm rigid PVC foam sheet mitered at corners and joined with 2 Nos. of 150mm long
32 brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square
tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be
fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of
Engineer-in-Charge
078140 261.00 Sqm 2478.31 646838.91 25.00 808548.64
Description:- Providing and fixing to existing door frames 30mm thick factory made panel PVC door shutter
33 consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and
15x15mm for top & bottom rails. M.S .frame shall have a coat of steel primers. M.S. frame covered with 5mm thick
heat moulded PVC Foam sheet 'C channel as per drawing given in IR Standard Specifications complete in all
respect
081011 800.00 Kg 58.15 46520.00 25.00 58150.00
Description:- Structural steel work in single section including cutting, bending, straightening, drilling, rivetting,
34
bolting, hoisting, fixing in position, including applying a priming coat of approved steel primer, complete - upto 6m
height above GL In RSJ, tees, angles and channels
081031 107100.00 Kg 81.67 8746857.00 25.00 10933571.25

35 Description:- Structural steel work welded in built up sections, trusses and framed work, girders, stagings, racks,
etc including cutting, bending, straightening, hoisting, fixing in position, including applying a priming coat of
approved steel primer, complete - upto 6m height above GL In RSJ, tees, angles and channels
081032 106011.00 Kg 79.20 8396071.20 25.00 10495089.00
Description:- Structural steel work welded in built up sections, trusses and framed work, girders, stagings, racks,
36
etc including cutting, bending, straightening, hoisting, fixing in position, including applying a priming coat of
approved steel primer, complete - upto 6m height above GL In flats, plates , round or square bars
081180 76.00 Sqm 2890.17 219652.92 25.00 274566.15
Description:- Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and
37 braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel
pulleys complete with bolts, nuts, locking arrangement, stoppers, handles and hold fasts including applying a
priming coat of approved steel primer
081211 50.00 Sqm 1744.79 87239.50 25.00 109049.38
Description:- Supplying and fixing rolling shutters of approved make as per IS 6248, made of required size M.S.
laths interlocked together through their entire length and jointed together at the end by end locks mounted on
38 specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push
and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire spring grade
No.2 and M.S. top cover of required thickness for rolling shutters 80x1.25mm M.S. laths with 1.25mm thick top
cover
081291 10404.00 Kg 81.00 842724.00 25.00 1053405.00
Description:- Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a
39
priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete Hot
finished welded type tubes
081360 1724.00 Kg 75.07 129420.68 25.00 161775.85
40

Pa g e 4 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

40
Description:- Providing and fixing M.S. round holding down bolts with nuts and washer plates complete
082011 76.00 Kg 374.11 28432.36 25.00 35540.45
Description:- Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with
extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285,
anodised transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15),
41 fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up
of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be
smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle. Aluminium
snap beading for glazing/ panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings
and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) For fixed portion
082012 315.00 Kg 381.04 120027.60 25.00 150034.50
Description:- Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with
extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285,
anodised transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15),
fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up
42 of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be
smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle. Aluminium
snap beading for glazing/ panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings
and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) For openable/sliding
portions and fixing hinges / pivots, PVC/ neoprene gasket required and making provision for fixing of fittings.
(Fittings shall be paid for separately)
082031 72.00 Sqm 722.26 52002.72 25.00 65003.40
Description:- Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with
43 PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.
(Cost of aluminium snap beading shall be paid in basic item) With float/frosted glass panes of 4mm thickness
(weight not less than 10.0 kg/sqm)
083020 72.00 Sqm 647.79 46640.88 25.00 58301.10
44 Description:- Providing and fixing Aluminium round/ square bars / flats or grill in frame of windows and cleastory
windows
083050 558.00 Kg 684.45 381923.10 25.00 477403.88
Description:- Fabricating, supplying & installing stainless steel railings for staircases, balconies, FOBs,
Enquiry/Reservation complex etc., made of SS 304 grade stainless steel, laser cut / water jet cut (no shearing),
45 polished with Automatic round/flat polishing machine to get a uniform hairline finish. All parts shall be connected to
each other with the help of prescribed size CNC made solid connectors, countersunk screws. Welding should be
finished ensuring that no welding marks are visible and assembly is mounted on floor with the help of dash
fasteners. Railings shall be fabricated as per approved drawings by engineer-in-charge. Manufacturer shall submit
maintenance manual and basic material test report for grade certification.
092012 675.00 Sqm 113.80 76815.00 25.00 96018.75
Description:- Cement concrete flooring 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate) finished with a
46
floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 40mm
thick with 20mm nominal size stone aggregate
094062 1080.00 Sqm 595.51 643150.80 25.00 803938.50
Description:- Providing & fixing Precast Chequered tiles conforming to IS:13801:1993, manufactured under
mechanical vibration & hydraulic pressing machine in double layer; top layer of 10 to 12 mm thickness of Dolomite
47 Powder, graded chips, fibre and UV stabilised iron oxide Lanexess colour and bottom layer of 1:3 CC mixed with
galvanised steel fibre of approved quality, jointed with neat cement slurry mixed with pigment to match shade of
tiles including rubbing and cleaning etc. complete on 20mm thick bed of cement mortar 1:4 of sizes : 300mm x
300mm x 30mm thick
095013 495.00 Sqm 723.32 358043.40 25.00 447554.25
Description:- Providing and fixing Ist quality ceramic tiles conforming to Group B-III (Ceramic Wall Tiles) of
48 IS:15622 of manufacturers approved by railway in all colours, shades, and design as approved by the Engineer-
in-Charge in skirting, risers of steps and dado over 12mm thick bed of cement mortar 1:3 (1cement: 3coarse
sand) including pointing in white cement mixed with pigment of matching shade complete 300x450 mm and above
095021 234.00 Sqm 533.30 124792.20 25.00 155990.25
Description:- Providing and fixing ceramic tiles conforming to IS:15622 of manufacturers approved by railway in
49 all colours, shades, design and abrasion resistance class as approved by the Engineer-in-Charge in floors and
landings over 20mm thick bed of cement mortar 1:4 (1cement: 3coarse sand) including pointing in white cement
mixed with pigment of matching shade complete Of Group B-II Clause 5.1 (for abrasion resistance) of IS:15622
(Ceramic Floor Tiles) of size 300x300mm
095022 29.00 Sqm 606.90 17600.10 25.00 22000.13

Pa g e 5 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

50 Description:- Providing and fixing ceramic tiles conforming to IS:15622 of manufacturers approved by railway in
all colours, shades, design and abrasion resistance class as approved by the Engineer-in-Charge in floors and
landings over 20mm thick bed of cement mortar 1:4 (1cement: 3coarse sand) including pointing in white cement
mixed with pigment of matching shade complete Of Group B-II Clause 5.1 (for abrasion resistance) of IS:15622
(Ceramic Floor Tiles) of size 400x400mm and above
095023 405.00 Sqm 661.04 267721.20 25.00 334651.50
Description:- Providing and fixing ceramic tiles conforming to IS:15622 of manufacturers approved by railway in
51 all colours, shades, design and abrasion resistance class as approved by the Engineer-in-Charge in floors and
landings over 20mm thick bed of cement mortar 1:4 (1cement: 3coarse sand) including pointing in white cement
mixed with pigment of matching shade complete Of Group B-I-b of IS : 15622 (Ceramic Tiles) of size 200x200mm
to 400x400mm
095026 1319.00 Sqm 930.11 1226815.09 25.00 1533518.86
Description:- Providing and fixing ceramic tiles conforming to IS:15622 of manufacturers approved by railway in
52 all colours, shades, design and abrasion resistance class as approved by the Engineer-in-Charge in floors and
landings over 20mm thick bed of cement mortar 1:4 (1cement: 3coarse sand) including pointing in white cement
mixed with pigment of matching shade complete Of Group B-I-a of IS : 15622 (Vitrified tiles) of size above
400x400mm upto 600x600 mm
096062 800.00 Sqm 882.71 706168.00 25.00 882710.00

53 Description:- Kota stone slab flooring of size up to 30x30cm over 20mm (average) thick base of 1:4 cement
mortar (1cement: 4coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the
slab including rubbing and polishing complete 25mm thick
096074 10500.00 Sqm 1148.88 12063240.00 25.00 15079050.00

54 Description:- Kota stone slab flooring of size up to 60x60cm over 20mm (average) thick base of 1:4 cement
mortar (1cement: 4coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the
slab including rubbing and polishing complete 40mm thick
098022 1620.00 Sqm 465.17 753575.40 25.00 941969.25
Description:- Supplying and laying interlocking pre-cast CC block pavers of approved design factory
55 manufactured of specified grade cement concrete on passenger platform, foot paths, circulating area etc.
including setting in position over 25mm thick bedding layer of fine sand, filling the joints with fine sand, leveling
including compaction as per IS:15658 80mm thick blocks of M35 grade for medium traffic
098030 1620.00 Sqm 60.84 98560.80 25.00 123201.00
56
Description:- Extra over items for using plastic moulds if specifically ordered
098040 1620.00 Sqm 73.75 119475.00 25.00 149343.75
57
Description:- Extra over items for lacquer finish
098050 1620.00 Sqm 24.43 39576.60 25.00 49470.75
58
Description:- Extra over Item 098010 for addition of pigment in concrete of paver blocks
099045 1639.00 Sqm 2571.75 4215098.25 25.00 5268872.81
Description:- Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters
59 facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over
20mm thick base cement mortar 1:4 (1cement: 4coarse sand) with joints treated with white cement, mixed with
matching pigment, epoxy touchups, including rubbing, curing. etc .complete at all levels Granite Pink. Area of slab
over 1.0 Sqm but upto 2.0 Sqm Or larger
099034 90.00 Sqm 2490.61 224154.90 25.00 280193.63
Description:- Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters
60 facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over
20mm thick base cement mortar 1:4 (1cement: 4coarse sand) with joints treated with white cement, mixed with
matching pigment, epoxy touchups, including rubbing, curing. etc. complete at all levels Granite Black. Area of
slab over 0.5 Sqm but upto 1.0 Sqm
099035 288.00 Sqm 2761.49 795309.12 25.00 994136.40
Description:- Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters
61 facias, dados and skirtings and similar locations of required size of approved shade, colour and texture laid over
20mm thick base cement mortar 1:4 (1cement: 4coarse sand) with joints treated with white cement, mixed with
matching pigment, epoxy touchups, including rubbing, curing. etc. complete at all levels Granite Black. Area of
slab over 1.0 Sqm but upto 2.0 Sqm or larger
105010 2638.00 Sqm 295.77 780241.26 25.00 975301.58

62

Pa g e 6 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

62
Description:- Providing & laying water-proof treatment on roof slabs by applying after preparation, cement slurry
mixed with Tapecrete acrylic based polymer water proofing compound (having solid content 30% ± 2, pH >7) in a
ratio of 2:1 (2 cement : 1 water proofing compound), followed by laying of fibre glass cloth; 2nd coat of cement
slurry mixed with acrylic based polymer water proofing compound and a final coat of water proofing compound
brush topping having water proofing compound, cement and c/sand @ 1:2:2 by weight. Complete job to be carried
out as per specifications
108162 315.00 Metre 205.53 64741.95 25.00 80927.44
Description:- Providing and fixing on wall face unplasticised - Rigid PVC single socketed rain water pipes
63
conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for
thermal expansion. 110mm dia.
109190 1080.00 Sqm 1094.56 1182124.80 25.00 1477656.00
Description:- Water proofing Surface treatment inside walls and floors of water reservoirs, swimming pools,
sunken slabs/toilet floors and inside of basements, etc by cleaning the surface; preparing the surface by acid
etching; treating the surface with a two layer plaster; the first layer shall be 7/6 mm thick with octadecanoic acid
based cementitious waterproofing compound and cement in the weight ratio of 3:50 for waterproofing compound
64 and cement; cement-sand (1:2 on floors of basements and tunnels, 1:3 elsewhere) plaster (12 mm thick on floor,
8 mm thick on vertical surfaces and at ceiling) and curing the plastered surface Providing and fixing PVC false
ceiling tiles of required size in true horizontal levels suspended on interlocking MS tube grid of section
25mmx25mmx1.2mm. PVC ceiling tiles should have a section size of 6mmx250mm with wall thickness of 0.8mm.
Perimeter edge of tiles shall be covered by extruded PVC corner beeding of size 9mm x 8mm x1 mm. MS tube
section grid should be properly secured with walls and anchored to roof with the help of suitable clamps with
complete work
109200 1695.00 Sqm 655.53 1111123.35 25.00 1388904.19
Description:- Providing and fixing permanently colour coated trapezoidal profiled sheet of depth 28-30mm at
195-205mm pitch distance with precisely engineered "Rib & Flute" design. Profiled sheets shall be min. 0.5mm
TCT/0.45mm BMT high tensile zinc aluminium alloy coated zincalume / galvalume steel sheet (550 mpa yield
65 strength) having a coating of mass of 150 gsm zinc-aluminium coating AZ-150 total on both sides as per, AS
1397:1993 finished with 20 microns approved colour coating of Silicon Modified Polyester (SMP) / Super Polyester
paint coat on exposed surface over a primer coat of 5 microns and a back coat of 5 microns on reverse side over
a 5 microns primer coat. There shall be 2 small ribs/square flutes between profiles for providing additional
strength. The sheet to be fixed over the purlins with hexagonal head self drilling suitable fasteners with neoprene /
EPDM washer on crests of the sheet
111011 370.00 Sqm 60.32 22318.40 25.00 27898.00
66
Description:- 12 mm cement plaster of mix - 1:4 (1cement: 4 fine sand)
111012 13300.00 Sqm 60.32 802256.00 25.00 1002820.00
67
Description:- 12 mm cement plaster of mix - 1:6 (1cement: 6fine sand)
111022 10164.00 Sqm 69.37 705076.68 25.00 881345.85
68 Description:- 15 mm cement plaster on the rough side of single or half brick wall of mix - 1:6 (1cement: 6 fine
sand)
111151 4933.00 Sqm 52.25 257749.25 25.00 322186.56
69
Description:- Cement plaster to ceiling of mix - 6 mm thick 1:3 (1cement: 3 fine sand)
115050 7155.00 Sqm 34.95 250067.25 25.00 312584.06
70 Description:- Distempering two or more coats on new work with 1st quality acrylic washable distemper (ready
mixed) of approved manufacturer and of required shade and colour complete as per manufacturer's specification
112040 7053.00 Sqm 72.86 513881.58 25.00 642351.98
71 Description:- Providing and applying plaster of Paris putty of 2mm average thickness over plastered surface to
prepare the surface even and smooth complete
115110 5058.00 Sqm 38.30 193721.40 25.00 242151.75
72 Description:- Finishing walls with water proofing cement paint of required shade two or more coats on new work
applied @ 3.84 Kg/10 sqm
115150 450.00 Sqm 75.72 34074.00 25.00 42592.50
73 Description:- Finishing walls with textured Interior paint of required shade on new work (Two or more coats
applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm
115160 5513.00 Sqm 81.91 451569.83 25.00 564462.29

74 Description:- Finishing walls with Acrylic Smooth exterior paint with Silicone additives of required shade on new
work (Two or more coats applied @ 1.67ltr/10 sqm over and including one coat of water proofing cement paint
applied @ 2.20 kg/10sqm
115170 15720.00 Sqm 78.86 1239679.20 25.00 1549599.00

75

Pa g e 7 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

75
Description:- Finishing walls with Acrylic Smooth Interior paint of required shade on new work (Two or more
coats applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20
kg/10sqm
121051 1125.00 Sqm 47.68 53640.00 25.00 67050.00
76 Description:- Painting with synthetic enamel paint of approved brand and manufacture to give an even shade
Two or more coats on new work
121091 873.00 Sqm 40.71 35539.83 25.00 44424.79
77 Description:- Painting with aluminium paint of approved brand and manufacture to give an even shade Two or
more coats on new work
131101 1200.00 Metre 108.06 129672.00 25.00 162090.00
Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &
78 cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with
one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-
Charge. External work 15mm nominal outer dia. Pipes
131102 600.00 Metre 125.47 75282.00 25.00 94102.50
Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &
79 cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with
one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-
Charge. External work 20mm nominal outer dia. Pipes
131103 350.00 Metre 158.57 55499.50 25.00 69374.38
Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &
80 cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with
one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-
Charge. External work 25mm nominal outer dia. Pipes
131106 400.00 Metre 460.65 184260.00 25.00 230325.00
Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &
81 cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with
one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-
Charge. External work 50mm nominal outer dia. Pipes
131141 81.00 Metre 186.96 15143.76 25.00 18929.70

82 Description:- Providing and fixing medium grade G.I. pipes complete with G.I. fittings and clamps, including
cutting and making good the wall etc. Concealed pipe including painting with anti corrosive bitumestic paint,
cutting chase and making good the wall 15 mm dia. nominal bore
131153 183.00 Metre 230.26 42137.58 25.00 52671.98
83 Description:- Providing and fixing medium grade G.I. pipes complete with G.I. fittings including trenching and
refilling etc. External Work 25 mm dia. nominal bore
131156 855.00 Metre 397.76 340084.80 25.00 425106.00
84 Description:- Providing and fixing medium grade G.I. pipes complete with G.I. fittings including trenching and
refilling etc. External Work 50 mm dia. nominal bore
132011 67.00 Each 199.65 13376.55 25.00 16720.69
85
Description:- Providing and fixing brass bib cock of approved quality 15 mm nominal bore
132021 14.00 Each 199.02 2786.28 25.00 3482.85
86
Description:- Providing and fixing brass stop cock of approved quality 15 mm nominal bore
142044 435.00 Metre 3596.39 1564429.65 25.00 1955537.06

87 Description:- Providing and laying non-pressure NP3 class (medium duty ) R.C.C. pipes including bends etc with
collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement: 2fine sand) including testing of
joints etc. complete above 800mm dia. 1200mm dia. R.C.C. pipe
143271 2.00 Each 10958.40 21916.80 25.00 27396.00

88 Description:- Making soak pit 2.5m diameter 3.0m deep with 45x45cm dry brick honey comb shaft with bricks of
class designation 7.5 and S.W. drain pipes 100mm diameter, 1.8m long complete as per standard design,
including excavation complete With F.P.S. bricks
151011 32.00 Each 2826.52 90448.64 25.00 113060.80
Description:- Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P
89 or S trap, 10litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming
to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever
required White Vitreous China Orissa pattern W.C. pan of size 580x440-mm with integral type foot rests
151021 37.00 Each 2589.28 95803.36 25.00 119754.20

90
Pa g e 8 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15
 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

90 Description:- Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with
seat and lid, 10litre low level white, P.V.C. flushing cistern with manually controlled device (handle lever)
conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and
floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
151041 9.00 Each 2468.26 22214.34 25.00 27767.93
Description:- Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of
91 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern , with standard flush
pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and
brackets, cutting and making good the walls and floors wherever required One urinal basin with 5litre white P.V.C.
automatic flushing cistern
151074 60.00 Each 1377.54 82652.40 25.00 103315.50
Description:- Providing and fixing wash basin with C.I./ M.S. brackets, 15mm C.P. brass pillar taps, 32mm C.P.
92 brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls
wherever required white vitreous china flat back wash basin size 550x400mm with single 15mm C.P. brass pillar
tap
152110 64.00 Each 762.23 48782.72 25.00 60978.40

93 Description:- Providing and fixing 600x450mm bevelled edge mirror , 5.5 mm thick of float glass (of approved
quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers
complete
161020 166.00 cum 242.92 40324.72 25.00 50405.90
94 Description:- Supplying and stacking of good earth at site including royalty (earth measured in stacks will be
reduced by 20% for payment)
161041 45.00 cum 103.09 4639.05 25.00 5798.81
Description:- Supplying and stacking at site dump manure / farm manure / animal dung manure from approved
95
source; including all lead and lift etc. (manure measured in stacks will be reduced by 8% for payment) Screened
through sieve of I.S. designation 20mm
161042 45.00 cum 120.34 5415.30 25.00 6769.13

96 Description:- Supplying and stacking at site dump manure / farm manure / animal dung manure from approved
source; including all lead and lift etc. (manure measured in stacks will be reduced by 8% for payment) Screened
through sieve of I.S. designation 4.75mm
161113 45000.00 100 Sqm 460.51 207229.50 25.00 259036.88

97 Description:- Supplying & Grassing with grass in rows 7.5cm apart in either direction including watering and
maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing
including supplying good earth if needed (the good earth shall be paid for separately) Mexican Grass
162062 90.00 Each 214.45 19300.50 25.00 24125.63
98
Description:- Avenue Plants Alstonia scholaris of height above 180 cm in earthen pots of size 25 cm
162066 90.00 Each 129.27 11634.30 25.00 14542.88
99
Description:- Avenue Plants Bottle palm of height 150-165 cm in earthen pots of size 30 cm
162070 90.00 Each 71.53 6437.70 25.00 8047.13
100
Description:- Avenue Plants Cassia fistula (Amaltash) of height 120-135cm in big polybag of size 25-30cm
162080 90.00 Each 70.16 6314.40 25.00 7893.00
101
Description:- Avenue Plants Delonix regia (Gulmohar) of height 135-150 cm in big each polybag of size 25-30cm
162120 90.00 Each 175.39 15785.10 25.00 19731.38
102 Description:- Avenue Plants Polyalthia pendula (Ashoka Pendula) of height 150-165 cm earthen pots of size 25
cm
171100 126.00 Each 140.81 17742.06 25.00 22177.58
Description:- Providing and fixing 16mm MS Fan clamps of standard shape and size in existing R.C.C. slab
103
including cutting chase and making good with 1:2 C:S mortar and painting (Two coats) exposed portion of the
clamps complete
171690 1485.00 Sqm 80.61 119705.85 25.00 149632.31
Description:- Providing & applying Pre-Construction Anti-Termite treatment to proposed structure, with
104 application of Imidacloprid 30.5% SC @ o.075% concentration mixed with water in ratio of 1:475, as per detailed
specifications given in Indian Railways Standard Specifications, so as to create a chemical barrier below and
around the structure by an approved agency. (Plinth Area/Basement floor area shall be considered for Payment)
231041 3380.00 cum 984.88 3328894.40 25.00 4161118.00

105

Pa g e 9 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

Description:- Providing and laying water bound macadam with specified stone aggregate, stone screening and
binding material including screening, sorting, spreading to template and consolidation with power road roller of 8
to 10 tonne capacity etc. complete. Sub-base with stone aggregate 90mm to 45mm including stone screening
13.2mm size
231042 2010.00 cum 1072.49 2155704.90 25.00 2694631.13

106 Description:- Providing and laying water bound macadam with specified stone aggregate, stone screening and
binding material including screening, sorting, spreading to template and consolidation with power road roller of 8
to 10 tonne capacity etc. complete. Base course with 63mm to 45mm size including stone screening 13.2mm size
231043 162.00 cum 1114.45 180540.90 25.00 225676.13
Description:- Providing and laying water bound macadam with specified stone aggregate, stone screening and
107 binding material including screening, sorting, spreading to template and consolidation with power road roller of 8
to 10 tonne capacity etc. complete. Base course with 53mm to 22.4mm size including stone screening 11.2mm
size
233011 5355.00 Sqm 23.19 124182.45 25.00 155228.06

108 Description:- Providing and applying tack coat using bitumen emulsion (Rapid setting) complying with IS: 8887-
1995, spraying the bitumen emulsion with mechanically operated spray unit, cleaning and preparing the existing
road surface as per specification On W.B.M. @ 0.4kg/ sqm
233012 5354.00 Sqm 15.90 85128.60 25.00 106410.75
Description:- Providing and applying tack coat using bitumen emulsion (Rapid setting) complying with IS: 8887-
109
1995, spraying the bitumen emulsion with mechanically operated spray unit, cleaning and preparing the existing
road surface as per specification On bituminous surface @ 0.25kg/ sqm
238021 260.00 cum 8145.53 2117837.80 25.00 2647297.25
Description:- Providing and laying Dense Bituminous concrete on prepared surface with specified graded stone
aggregate for wearing course, mixing of bitumen, filler & stone aggregate in hot mix plant, transporting the mixed
110 material and laying with mechanical paver finisher fitted with electronic sensing device to the required level and
grade and rolling with road rollers, as per specification, to achieve the desired density and compaction but
excluding cost of primer / tack coat 40 mm / 50mm compacted thickness with bitumen of grade 60/70 @ 6.5% and
lime @ 3% by weight of total mix
238050 585.00 Sqm 639.45 374078.25 25.00 467597.81
Description:- Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ colour
using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile
111 shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on
road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and
foreign material etc. complete as per direction of Engineer-in-charge and in accordance with applicable
specifications
257050 34200.00 Litre 6.67 228114.00 25.00 285142.50
112
Description:- Polyethylene Vinyl Chloride water storage tank with cover and suitable locking arrangement
082041 4.00 Each 1866.14 7464.56 25.00 9330.70
Description:- Providing and fixing double action hydraulic floor spring of approved brand and manufacture
113 IS:6315 including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and
single piece M.S. Sheet outer box with slide plate etc. complete as per the direction of Engineer-incharge With
Stainless Steel cover plate
082080 90.00 Sqm 2258.87 203298.30 25.00 254122.88
Description:- Aluminium Composite Cladding - Providing and fixing Aluminium Composite Panels having total
thickness of 4mm (with 0.5mm thick aluminium foil skin on both sides) alongwith minimum 25 micron PVdF
Coating on top coil and Polymer/epoxy coating on Back coil (4-7 microns) fixed on aluminium substructure of
114 50mm x 25mm x 3mm or 38mm x 38mm x 4mm (IS Grade Aluminium Extrusion) with stainless steel fastening
system of Hilti/Fischer Dash Fasteners on facade, horizontal / vertical surfaces of columns, suspended ceiling,
sills, jambs, canopies etc. and making 25mm grooves and applying non staining and non streaking sealant 789 or
991 HP with Baker Rod complete as per approved shop drawings and as per specifications (straight and curved).
Only exposed surfaces to be measured and paid.
082050 90.00 Kg 473.82 42643.80 25.00 53304.75
Description:- Providing and fixing anodised aluminium work (with minimum 15 micron uniform anodic coating)
consisting of tee/angle sections, of approved make conforming to IS:733 in frames of false ceiling including
115 aluminium angle cleats with necessary C.P. brass/stainless steel sunk screws, aluminium perimeter angles fixed to
wall with rawl plugs @ 450 mm centre to centre and fixing the frame work to level adjusting hangers (6mm dia.
M.S. rods) with necessary cadmium plated machine screws all complete as per approved architectural drawings
and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be
paid for separately)
252020 12650.00 cum 293.14 3708221.00 25.00 4635276.25
116
Description:- Moorum

Pa g e 10 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

013150 5765.00 cum 60.31 347687.15 25.00 434608.94

Description:- Laying and spreading blanketing materials (Natural or Mechanically prepared as per GE-1 or
G.E.IRS-2) over new / old embankment / cutting in layers of 30 cm in loose state to make the embankment of
designed profile as per specifications. The rate is inclusive of initial site clearance, cutting of shrubs, removal of
117 roots of vegetation growth & heavy grass, surfacing and leveling to give required slope, benching if required on
existing bank slope, dressing and finishing of bank, all lead & lift, ascent, descent, crossing of nallahs/ other
obstructions, spreading the material and final dressing of slopes and top surface as per specified camber using
contractor's own machinery, equipment, T&P labour etc., as a complete job. Note - The rate does not include
supply / compaction of blanketing material at site which shall be paid separately.
Lump Sum 8500000.00 25.00 10625000.00
118
Description :- Lumpsum provision under USSOR-2010 for any other items not covered above

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule 4-Execution of All Works As Detailed In Schedule '4' (Misc works - NS items) 17636278.60
Below/Par
1 1650.00 cum 3730.00 6154500.00 AT Par 6154500.00
1 Description:- Brick work with Fly Ash lime of desig 7.5 in foundation & plinth in CM(1:6) with contractor's bricks,
sand, labour etc. Complete. Cost of cement actually used will be paid separately under relevent schedule.
2 350.00 Sqm 4246.00 1486100.00 AT Par 1486100.00
2 Description:- Fabricating,supplying and fixing pressed steel door, window shutter with contractors pressed steel
1.25mm (18 Gauge) thick confirming to IS:4351/1976
3 6.00 Each 1318.00 7908.00 AT Par 7908.00
3
Description:- Conductig ground resistivity survey for assurance of water availability and selection of bore well.
4 6.00 Each 4029.00 24174.00 AT Par 24174.00
4
Description:- Development of bore well and developing yield and yield testing by V-notch
5 6.00 Each 83338.00 500028.00 AT Par 500028.00
Description:- Supplying and installation of submersible pump of duty 8000 liters/hour against total head of 80m-
5
5 HP (including supply of starter single phase preventer, dry running preventer and 50 mm dia GI class- B pipe
line with in the bore well, wet type power cable from panel board up to
Running
6 855.00 858.00 733590.00 AT Par 733590.00
Metre
6
Description:- Drilling of perfectely vertical bore well to suit 200 mm inner dia casing pipe using neumatic rig in all
kind of soil soft and hard rock.
Running
7 415.00 1141.00 473515.00 AT Par 473515.00
7 Metre
Description:- Supplying providing & lowering 200mm dia 3 mm casing pipe
8 30.00 Sqm 4906.00 147180.00 AT Par 147180.00
8
Description:- Providing & installing 12 mm clear float glass as per required sizes
Running
9 305.00 172.00 52460.00 AT Par 52460.00
9 Metre
Description:- Supplying and fixing of 75/100mm dia PVC pipe as weep holes
10 15.00 Each 845.00 12675.00 AT Par 12675.00
10 Description:- Providing & fixing C P brass angle cock of Jaguar make model no CP(053)or equivalent approved
by engineer in charge with all fitting inciuding all labour, taxes/charges etc complete
11 25.00 Each 1000.00 25000.00 AT Par 25000.00
11
Description:- Providing & fixing bib cock of approved quality of sige 15mm(Model no -037 of jaguar make)
12 4.00 Each 1997.00 7988.00 AT Par 7988.00
12
Description:- Providing and fixing wall mixer(hot and cold water system)(model no 219 of Jaguar make)
13 4.00 Each 1885.00 7540.00 AT Par 7540.00
13
Description:- Providing and fixing shower 15mmsize with shower arm (model no 483 & 489 of jaguar make
14 8.00 Each 1091.00 8728.00 AT Par 8728.00
14 Description:- Providing & fixing towel rail 600x20mm complete with bracket fixing to wooden cleat with screw
(Model no 1111 of jaguar make)
15 4.00 Each 1110.00 4440.00 AT Par 4440.00
15 Description:- Providing & fixing (600x120mm class shelf supported on aluminium angle frame with cp brass
bracket with guard rail complete fixed to wooden cleats with screw and washers(model no 1171 of jaguar make)

Pa g e 11 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

16 4.00 Each 3135.00 12540.00 AT Par 12540.00

16 Description:- Providing & fixing (600x450mm Bevelled edge mirror of superior glasswith 6mm hard board ground
and fixing to wooden cleats with cp screw,washer etc.complete.
17 4.00 Each 774.00 3096.00 AT Par 3096.00
17
Description:- Providing & fixing soapdish with bracket (Model no 1131 of jaguar make)
18 4.00 Each 588.00 2352.00 AT Par 2352.00
18
Description:- Providing & fixing toilet paper holder(Model no 1151 of jaguar make)
19 4.00 Each 3580.00 14320.00 AT Par 14320.00
Description:- Providing & fixing round wash basin of size550x 400mm dia (parryware/ hindware make) with 1 no
19 of pillar cock long neck (Model no 021 of jaguar make) 1no of 32mm waste coupling (Model no 709 of jaguar
make) 1no of 32mm size with 190mm long wall connection pipe bottle trap european model no 767 of jaguar
make) angular stop cock model no 053 of jaguar make) includig fixing of brackets cutting and making good the
wall whenever required.
20 5.00 Each 16336.00 81680.00 AT Par 81680.00
Description:- Supplying and fixing coloured WC with flushing cistern fitting acessories complete set model no -
20
20032 of hindware of equivalent as approved by Engineer in charge including an contractor material, labour,toois
and plants lead, lift, taxes/ charges etc complete
21 200.00 Sqm 4125.00 825000.00 AT Par 825000.00
21
Description:- Supplying and fixing 6mm wide multiwall poli carbonate sheet
22 80.00 Sqm 1059.00 84720.00 AT Par 84720.00
22
Description:- Supplying and fixing stainless steel mosquito net
23 900.00 Sqm 1025.00 922500.00 AT Par 922500.00
Description:- Construction of reinforced earth retaining wall including excavation for foundation (including sheet
pilling , refilling of trench, disposal of surplus earth with all lead and lift dewatering) foundation concrete and
23 cement concrete grooved and placment assembling joining and laying of reinforcing element complete. The
above item shall be payable only after back filling behind the wall is completed by granular material duly watered
rolled and compacted. (back filling behind the facing shall be paid separately.) Providing of precast facia element
of M-35 RCC (steel and cement shall be paid separately in relevant schedule)
24 4500.00 Sqm 278.00 1251000.00 AT Par 1251000.00
Description:- Construction of reinforced earth retaining wall including excavation for foundation (including sheet
pilling , refilling of trench, disposal of surplus earth with all lead and lift dewatering) foundation concrete and
24 cement concrete grooved and placment assembling joining and laying of reinforcing element complete. The
above item shall be payable only after back filling behind the wall is completed by granular material duly watered
rolled and compacted. (back filling behind the facing shall be paid separately.) Assembling, joining and laying of
reinforcing elements of synthetic geogrids of reputed firm like techfab, parawev, Z - Tech, Tenax, Ailil, or as
approved by engineer in charge
25 300.00 Metre 694.00 208200.00 AT Par 208200.00
Description:- Narrow filter sub - surface drain (construction of a narrow filter sub - surface drain consisting of
25
paras or perforated pipe laid in narrow trench surrounded by a geotextile filter fabric, with a minimum of 450 mm
overlap of fabric and installed as per clause 2.3 including excavation and backfilling
26 1220.00 Kg 152.00 185440.00 AT Par 185440.00
26 Description:- Fabricating,supplying and fixing pressed steel door,window framwe with contractor pressed steel
CR sheet 1.25mm thick( 18gauge) confirming to IS:4351/1976
27 5560.00 Sqm 260.00 1445600.00 AT Par 1445600.00
Description:- Providing and applying texture plaster/ grid finish with finishing texture material of approved make
27
in 3mm thichness on previously plaster surface including groves including preparing of surface scaffolding etc.(
Make Heritage or equivalent.)
28 5560.00 Sqm 232.00 1289920.00 AT Par 1289920.00
28 Description:- Finishing wall on texture surface/ exterior surface with paint of required shades of Ultima grade of
make Nerolac, Asian or similar as approved by engineer incharge.
29 500.00 Sqm 128.00 64000.00 AT Par 64000.00

29 Description:- Providing and fixing chicken mesh of 22 guage with about 30 cm width at the jucnction of R.C.C.
members and brick work , of approved quality including fixing mesh in position by necessary drilling in concrete /
B.B masonary and or typing by binding wire etc. complete (Including Staging) Ground floor
30 500.00 Sqm 129.28 64640.00 AT Par 64640.00
Description:- Providing and fixing chicken mesh of 22 guage with about 30 cm width at the jucnction of R.C.C.
30 members and brick work , of approved quality including fixing mesh in position by necessary drilling in concrete /
B.B masonary and or typing by binding wire etc. complete (Including Staging) First floor

Pa g e 12 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

31 500.00 Sqm 130.56 65280.00 AT Par 65280.00

Description:- Providing and fixing chicken mesh of 22 guage with about 30 cm width at the jucnction of R.C.C.
31
members and brick work , of approved quality including fixing mesh in position by necessary drilling in concrete /
B.B masonary and or typing by binding wire etc. complete (Including Staging) Second floor
32 18.00 Sqm 5284.45 95120.10 AT Par 95120.10
Description:- Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm
thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro
reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters,
borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade,
pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure
32 conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of
suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well
as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of
epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate
includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and
erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.
(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be
measured for payment. Overhead informatory road signage
33 500.00 Metre 512.30 256150.00 AT Par 256150.00
Description:- Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in
33 IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log,
including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete
as per direction of Engineer-in-charge, upto 90 metre depth below ground level All types of soil 300 mm dia
34 50.00 Metre 597.65 29882.50 AT Par 29882.50
Description:- Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in
34 IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log,
including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete
as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of
soil 300 mm dia
35 500.00 Metre 1066.05 533025.00 AT Par 533025.00
Description:- Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC
35 medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour
charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge 200 mm
nominal size dia
36 60.00 Metre 1326.55 79593.00 AT Par 79593.00
36 Description:- Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit,
in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge
37 30.00 Metre 1326.55 39796.50 AT Par 39796.50

37 Description:- Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit,
over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of
Engineer-in-charge.
38 20.00 Metre 1326.55 26531.00 AT Par 26531.00
38 Description:- Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit,
in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
39 10.00 Sqm 4447.90 44479.00 AT Par 44479.00
Description:- Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and
39 manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing
arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of
Engineer-incharge (Door handle, lock and stopper etc.to be paid separately
40 250.00 Sqm 1462.35 365587.50 AT Par 365587.50
Description:- Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with
40 EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-
charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 8 mm thickness
(weight not less than 20 kg/ sqm)

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Above/
Schedule 5-Execution of All Works As Detailed In Schedule '5' (Sewage treatment plant) 1235000.00
Below/Par
1 1.00 Lumpsum 1235000.00 1235000.00 AT Par 1235000.00

Pa g e 13 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

1 Description:- Design supervision and commissioning with providing special filter media, Bio Culture media, Bio
additives etc complete as per detailed specification in Annexure-1. Annexure -1 is available in tender
schedule/tender document.

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Unit
Schedule 6-Execution of All Works As Detailed In Schedule '6' (Supply of steel- USSOR- Above/
77765976.58
10) Below/Par
045016 1234851.00 Kg 52.48 64804980.48 20.00 77765976.58
1 Description:- Supplying Reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete. Thermo-Mechanically Treated bars

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Unit
Schedule 7-Execution of All Works As Detailed In Schedule '7' (Supply of cement- Above/
46333787.50
USSOR-10) Below/Par
033063 7150.00 Tonne 5635.00 40290250.00 15.00 46333787.50
1
Description:- Supply and using cement at worksite : PPC

S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding
Code Unit
Schedule 8-Execution of All Works As Detailed In Schedule '8' (Electrical works - NS Above/
12776851.00
Items) Below/Par
1 4.00 Numbers 1169.00 4676.00 AT Par 4676.00
1
Description:- Survey, design, preparation of layout plan and as erected'/ completion drawings (for all works).
2 1.00 Numbers 6739.00 6739.00 AT Par 6739.00
2
Description:- Supply & fixing of Cu. Bus bar chamber 200 A TPN 6 way for cable termination & distribution
3 30.00 Numbers 10293.00 308790.00 AT Par 308790.00
3
Description:- Supply of GI octagonal type 5 meter street light poles with double arm bracket & all accessories
4 28.00 Numbers 2130.00 59640.00 AT Par 59640.00
4
Description:- Supply of 10 A, 240 V Electronic energy mtr single phase.
5 28.00 Numbers 3500.00 98000.00 AT Par 98000.00
5
Description:- Supply & erection of meter box with 2x16 A Kit-Kat fuse
6 170.00 Numbers 135.00 22950.00 AT Par 22950.00
6
Description:- Supply and erection of 9 W LED lamp
7 52.00 Numbers 2010.00 104520.00 AT Par 104520.00
7
Description:- Supply of 25 W outdoor LED fittings with lamp
8 60.00 Numbers 4117.00 247020.00 AT Par 247020.00
8 Description:- Supply of 45 W outdoor LED street light fitting with all accessories with top cover toughned
glass:IP65
9 48.00 Numbers 14201.00 681648.00 AT Par 681648.00
9
Description:- Supply of Street light fittings suitable for 150W LED flood light with lamps
10 350.00 Numbers 1081.00 378350.00 AT Par 378350.00
10 Description:- Supply of LED 20 W, 6000K box type 4' tube light fitting with tube for service building and platform
lighting
11 40.00 Numbers 2288.00 91520.00 AT Par 91520.00
11 Description:- Supply of 40 W LED 6000K, with IP 65 surface mounting with decorative luminaires 4' fitting with
tube for platform lighting.
12 100.00 Numbers 4800.00 480000.00 AT Par 480000.00
12
Description:- Supply of 18 W LED, 6000K recess mounting type down lighters.
13 40.00 Numbers 3500.00 140000.00 AT Par 140000.00
13 Description:- Supply of Recess mounted back-lit LED 2'x2' size , 34/36 W, rated CCT 6000K with highly
transulate opal diffuser and suitable for 600x600 mm.
14 200.00 Numbers 2050.00 410000.00 AT Par 410000.00
14
Description:- Supply of Ceiling fan 1200 mm sweep

Pa g e 14 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

15 200.00 Numbers 252.00 50400.00 AT Par 50400.00

15
Description:- Supply of Modular type electronic fan regulators, (1 Module)
16 50.00 Numbers 1580.00 79000.00 AT Par 79000.00
16
Description:- Supply of Exhaust fan 300 mm sweep.
17 6.00 Numbers 2473.00 14838.00 AT Par 14838.00
Description:- Supply of Distribution Board suitable for 3 phase 440 V AC supply and complete with din bar,
17
neutral link, earthing, terminal and copper links for shorting the MCB's terminals of approved make similar to
standard KSS-6, 6 Way Double Door TPN economy type
18 46.00 Numbers 1820.00 83720.00 AT Par 83720.00
18 Description:- Supply of Distribution Board suitable for 1 phase 230 V AC complete with din bar, neutral link,
earthing, terminal and copper links for shorting the MCB's terminals 4 Way Double Door economy type.
19 34.00 Numbers 3669.00 124746.00 AT Par 124746.00
19
Description:- Supply of ELCB 32 A DP
20 6.00 Numbers 2030.00 12180.00 AT Par 12180.00
20
Description:- Supply of 63 A FP (TPN) MCB 10KA breaking capacity
21 54.00 Numbers 511.00 27594.00 AT Par 27594.00
21
Description:- Supply of 32 A DP MCB. with metallic enclouser.
22 54.00 Numbers 506.00 27324.00 AT Par 27324.00
22
Description:- Supply of 16 A DP MCB. with metallic enclouser
23 164.00 Numbers 156.00 25584.00 AT Par 25584.00
23
Description:- Supply of 6-32 A SP MCB. with metallic enclouser.
24 2.00 Numbers 15933.00 31866.00 AT Par 31866.00
24 Description:- Supply of Feeder pillar box out door type 3 phase 415 volts with bus bar arrangement comprising
1x200 A, FP, MCCB for incoming & 4x63 A FP MCCB as out going complete with metering arrangement.
25 3.00 Numbers 16139.00 48417.00 AT Par 48417.00
25 Description:- Supply of LT panel board consisting 1 x100 A, FP MCCB incoming, 4x63 A FP MCCB and 4x32 A
FP MCCB's outgoing etc. complete with metering arrangement.
26 4.00 Numbers 9226.00 36904.00 AT Par 36904.00
26 Description:- Supply of LT distribution board comprising of 1x32 A TPN MCB incoming & 4x16 A DP MCB
outgoing.
27 200.00 Metre 474.00 94800.00 AT Par 94800.00
27
Description:- Supply of GI pipe 50 mm for cable laying on wall and other puposes
28 52.00 Numbers 1349.00 70148.00 AT Par 70148.00
28
Description:- Supply of Earth cone 60.2mm dia with clamps.
29 6.00 Numbers 400000.00 2400000.00 AT Par 2400000.00
Description:- Supply of 12.5 M High mast lighting system with 6 Nos. 250 Watt LED flood lights along with its all
accessories. Mast shaft having top 150 mm Bottom 360 mm shall be in 2 sections and hot deep galvanized from
29 inside & outside and suitable for wind velocity as per IS 875 part 3. It shall also include accessories for High Mast
including head frame, 2 rope steel wire rope, trailling cables, galvanized lantern carriage suitable for luminaries
and its control gear box and lighting finial. It also includes suitable SGDD Winch. Power Tool, including Aviation
light-GLS. This also include control panel housing contractors, single dial timer, MCB for auto switching ON & OFF
on preset time. Suitable size of foundation bolt also included
30 6.00 Numbers 34498.00 206988.00 AT Par 206988.00
30
Description:- Supply of 1.5 capacity Split AC energy efficient type with 3 to 5 star rating. (4500kCL/HR)
31 3.00 Numbers 1320000.00 3960000.00 AT Par 3960000.00
Description:- Design, supply, erection, testing & commissioning of Electric Traction Elevator (lift) for 13 persons
about 884 Kgs, confirming to RDSO specification No. RDSO/2013/ EM/SPEC/0016 (Rev '0') amdt-1 or latest
31 version, (G+4) with 5 stops, central opening on same side with Automatic Rescue Device. This includes sevice tax
of 14 % on 20% of contract value or as per the prevailing rates at the time of execution of work. The contractor
shall make his own arrangements for loading or unloading of all materials at depot or at worksite. (For supply of
lift, as per Railway Board's letter No. 2015/Elect(G)/150/2 Dt. 07.04.2015, approved lift manufacturers are i) M/s
OTIS ii) M/s Kone iii) M/s Mitsubishi iv) M/s Schindler v) M/s Johnson Lifts Pvt. Ltd. Chennai).
32 3.00 Numbers 74448.00 223344.00 AT Par 223344.00
32 Description:- Supply, erection, testing & commissioning of Automatic Rescue device for Elevator with all
accessories
33 3.00 Job 53930.00 161790.00 AT Par 161790.00

33
Pa g e 15 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15
 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

33
Description:- Civil work for installation of new lift and all its associated accessories including doors, indication
lights on each floor, reflooring etc
34 1.00 Numbers 7853.00 7853.00 AT Par 7853.00
Description:- Supply of DOL starter for 3 phase, 5 HP submersible pump with control panel with provision of
34
protection like phasefailure, phase imbalance, phase reversal, short circuit etc; with metering arrangement,
ON/OFF & Trip indication with enclosure
35 1.00 Numbers 34733.00 34733.00 AT Par 34733.00
35
Description:- Supply of 3 Ph 5 HP submersible pump
36 10.00 Job 8082.00 80820.00 AT Par 80820.00
36 Description:- Supply, design, fixing, testing & commissioning of LED based station name boards (English & Hindi)
for stations with all accessories. Note: Unit of this item 'Job' stands for 'Letter'.
Square
37 160.00 1161.00 185760.00 AT Par 185760.00
37 Foot
Description:- Supply, fixing testing and commissioning of LED back lit signage board with IP-65.
38 100.00 Numbers 114.00 11400.00 AT Par 11400.00
38
Description:- Erection of SST poles / Rail poles/RSJ pole/GI octagonal pole etc.
39 70.00 Numbers 1607.00 112490.00 AT Par 112490.00
39
Description:- Painting of electric pole
40 115.00 cum 1607.00 184805.00 AT Par 184805.00
40 Description:- Concrete foundation for 4-pole structure, plinth for transformer, upright for fencing, Rail poles, guy
post, sst pole, poles for battery charging facility, etc.
41 150.00 Numbers 162.00 24300.00 AT Par 24300.00
41
Description:- Erection, testing and commissioning of outdoor light fitting
42 1000.00 Point 249.00 249000.00 AT Par 249000.00
Description:- Point Wiring for C/Fan/T.Liftings/ Exh.Fan/ Bulk head fitting/Lamp/Call bell etc; & Erection, testing
42
and commissioning of 3/5 pin, 10 Amps capacity plug socket with modular switches modular switch plates and
modular switch box with 4 sq.mm copper wire including supply of all materials.
43 400.00 Point 42.00 16800.00 AT Par 16800.00
43 Description:- Point wiring concealed with PVC pipe / casing capping with 2.5 sq.mm FRLS copper conductor for
3/5 pin 10A plug socket modular type on separate board. (rate per socket)
44 200.00 Point 242.00 48400.00 AT Par 48400.00
44 Description:- Point wiring concealed with PVC pipe / casing capping with 4 sq. mm FRLS copper conductor for
3/5 pin 10/20A plug socket modular type with modular plate & switches on separate board.
45 910.00 Numbers 12.00 10920.00 AT Par 10920.00
45 Description:- Fixing & testing of TFL fittings / C/Fan/fan regulator / Ex.Fan /wall mounting fan/ Bulk head fitting /
Lamp/Call bell/energy meter etc
46 40.00 Numbers 28.00 1120.00 AT Par 1120.00
46
Description:- Erection, testing and commissioning of Exhaust Fan 300mm / Geyser
47 40.00 Numbers 23.00 920.00 AT Par 920.00
47 Description:- Fixing of Distribution Board suitable for 1 phase 230 V AC complete with din bar, neutral link,
earthing, terminal and copper links for shorting the MCB's terminals 4 Way Double Door economy type
48 6.00 Numbers 37.00 222.00 AT Par 222.00
48
Description:- Erection of 63 A FP (TPN) MCB 10KA breaking capacity with Metalic enclosure
49 272.00 Numbers 17.00 4624.00 AT Par 4624.00
49
Description:- Erection of MCB 32 A DP/16A DP,6-10 A SP MCB with metallic enclouser
50 2.00 Set 351.00 702.00 AT Par 702.00
50 Description:- Erection of feeder pillar box out door type 3 phase 415 volts comprising 1x200 A, FP MCCB for
incoming & 4x63 A FP MCCB as out going complete with metering arrangement
51 3.00 Numbers 51.00 153.00 AT Par 153.00
51 Description:- Erection of LT panel board consisting 1 x100 A, FP MCCB incoming, 4x63 A FP MCCB and 4x32 A
FP MCCB's outgoing etc. complete with metering arrangement.
52 4.00 Numbers 266.00 1064.00 AT Par 1064.00
52 Description:- Erection of LT distribution board comprising of 1x32 A TPN MCB incoming & 4x16 A DP MCB
outgoing
53 200.00 Metre 17.00 3400.00 AT Par 3400.00
53

Pa g e 16 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

Description:- Fixing of GI pipe 50 mm

54 52.00 Numbers 227.00 11804.00 AT Par 11804.00
54
Description:- Erection of Earth cone 60.2mm dia with clamps.
55 6.00 Numbers 1004.00 6024.00 AT Par 6024.00
55
Description:- Erection. Testing & commitioning of split AC
56 6.00 Point 835.00 5010.00 AT Par 5010.00
56 Description:- Concealed wiring for 1.5/2 ton split AC point with 6 sq.mm. insulated copper conductor including
with supply of Ray-roll socket with 30/32A SP MCB and all materials (Modular type).
57 6.00 Numbers 15955.00 95730.00 AT Par 95730.00
57
Description:- Erection & commissioning of highmast, feeder pillar & earthing of highmast
58 6.00 Numbers 31911.00 191466.00 AT Par 191466.00
58
Description:- Construction of shallow foundation with M-25 grade concrete for High mast tower light system
59 5300.00 Metre 51.00 270300.00 AT Par 270300.00
Description:- Excavation of cable trench one mtr. Deep, laying of semi circular RCC pipe 150 mm dia., laying of
59
50 mm thick sand under the pipe and re-filling of excavated earth including supply of RCC pipe 150 mm inside
dia.,30 mm thick & sand (along the road/track/drain).
60 800.00 Metre 75.00 60000.00 AT Par 60000.00

60 Description:- Excavation of cable trench one mtr. Deep, laying of 150 mm dia. circular RCC pipe, and re-filling of
excavated earth including supply of RCC pipe 150 mm inside dia.,30 mm thick & sand (across the
road/track/drain).
61 10600.00 Metre 10.00 106000.00 AT Par 106000.00
61 Description:- Laying of LT PVC cable 1.1 KV grade in 150 mm semicircular RCC pipe (along the road / track /
drain) (Rate per cable)
62 1600.00 Metre 10.00 16000.00 AT Par 16000.00
62 Description:- Laying of LT PVC cable 1.1 KV grade in 150 mm circular RCC pipe (across the road / track / drain)
(Rate per cable)
63 536.00 Metre 200.00 107200.00 AT Par 107200.00
63 Description:- Laying of cables on Structure / Rail / Wall through 50 mm dia. GI pipe with MS flat clamps including
supply of pipes, clamps etc.
64 1020.00 Metre 10.00 10200.00 AT Par 10200.00
64
Description:- Laying of HT/LT PVC cables on Structure / Rail / Wall in air with MS flat clamps.
65 400.00 Metre 38.00 15200.00 AT Par 15200.00
65 Description:- Excavation of cable trench, brick troughing, sand filling and laying of two loops of HT/LT cable near
the supporting structures and re-filling the excavated earth
66 32.00 Numbers 5789.00 185248.00 AT Par 185248.00
66
Description:- Sub-service connection to service building
67 1.00 Numbers 3687.00 3687.00 AT Par 3687.00
Description:- Transportation, Installation, Testing & Commissioning of 5 HP Vertical submersible pump set /
67
Horizontal open well pump & control panel including electric connection from the nearby supply point, earthing,
MS Clamp, MS chain etc. as per details

3. ITEM BREAKUP

No item break up added

4. ELIGIBILITY CONDITIONS

Important : All documents uploaded and remarks / confirmation entered by the bidders against any eligibility condition
shall be opened as part of technical bid only

Special Technical Criteria

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading

Pa g e 17 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

Technical criterion: The tenderer must have successfully completed any of the following
during last 07 (seven) years, ending last day of month previous to the one in which
tender is invited: Three similar works each costing not less than the amount equal to
30% of advertised value of the tender. OR Two similar works each costing not less than
the amount equal to 40% of advertised value of the tender, OR One similar work each
costing not less than the amount equal to 60% of advertised value of the tender, (i)
Similar work for the purpose of eligibility criteria under (a) above shall mean
"Construction of any Civil Engineering work involving building works". (ii) Work
experience certificate from private individual shall not be considered. However, in
addition to work experience certificates issued by any Government Organisation, work
Allowed
1 experience certificate issued by Public Listed Company having average annual turnover No No
(Mandatory)
of Rs. 500 Crore and above in last three financial years excluding the current financial
year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/
registered at least 5 years prior to the date of opening of tender, shall also be considered
provided the work experience certificate has been issued by a person authorized by the
Public listed Company to issue such certificates. In case tenderer submits work
experience certificate issued by public listed company, the tenderer shall also submit
along with work experience certificate, the relevant copy of work order, bill of quantities,
bill wise details of payment received duly certified by Chartered Accountant, TDS
certificates for all payments received and copy of final/last bill paid by company in
support of above work experience certificate.

Special Technical Criteria

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Financial criterion: The tenderer must have received contractual payments in the
previous three financial years and the current financial year upto the date of inviting of
tender, at least 150% of the advertised value of the tender. The tenderers shall submit
Certificates to this effect which may be an attested Certificate from the concerned Allowed
1 No No
department / client and/or Audited Balance Sheet duly certified by the Chartered (Mandatory)
Accountant/Certificate from Accountant duly supported by Audited Balance sheet. Note :
Client Certificate from other than Government Organization should be duly supported by
16A/26AS generated through TRACES of Income Tax Department of India

Special Financial Criteria

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula
detailed as below: For works costing more than 20 Cr wherein eligibility criteria includes
bid capacity also, the tenderer will be qualified only if its available bid capacity is equal
to or more than the total bid value of the present tender. The available bid capacity shall
be calculated as under: Available Bid Capacity = [A x N x 2] - B Where A = Maximum
value of construction works executed and payment received in any one of the previous
three financial years or the current financial year (up to date of inviting of tender) taking
into account the completed as well as works in progress. N= Number of years prescribed
for completion of work for which bids has been invited. B = Value of existing
commitments and balance amount of ongoing works with the tenderer to be completed in
next 'N' years. Note: (a)The Tenderer(s) shall furnish the details of existing commitments
and balance amount of ongoing works with tenderer as per the prescribed proforma as
Annexure-III for statement of all works in progress and also the works which are awarded
to tenderer but yet not started upto the date of inviting of tender. In case of no works in
hand, a 'NIL' statement should be furnished. This statement should be submitted duly
verified by Chartered Accountant. (b)In case of JV, the tenderer(s) must furnish the Allowed
1 No No
details of existing commitments and balance amount of ongoing works with each (Mandatory)
member of JV as per the prescribed proforma as Annexure - III for statement of all works
in progress and also the works which are awarded to tenderer but yet not started upto the
date of inviting of tender. In case of no works in hand, a 'NIL' statement should be
furnished. This statement should be submitted duly verified by Chartered Accountant.
(c)Value of a completed work/work in progress/work awarded but yet not started for a
Member in an earlier JV shall be reckoned only to the extent of the concerned member's
share in that JV for the purpose of satisfying his/her compliance to the above mentioned
bid capacity in the tender under consideration. (d)The arithmetic sum of individual "bid
capacity" of all the members shall be taken as JV's "bid capacity". (e)In case, the
tenderer/s failed to submit the above statement along with offer, their/his offer shall be
considered as incomplete and will be rejected summarily. (f)The available bid capacity of
tenderer shall be assessed based on the details submitted by the tenderer. In case, the
available bid capacity is lesser than estimated cost of work put to tender, his offer shall
not be considered even if he has been found eligible in other eligibility criteria/tender
requirement.

Pa g e 18 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

Special Technical Criteria

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Offers submitted by Joint Venture are permitted. Technical Eligibility Criteria: The
technical eligibility for the work as per para 1.1 of detailed NIT provided in the tender
document , shall be satisfied by either the 'JV in its own name & style' or 'any member
having minimum 26% share'. Each other member of JV shall have technical capacity of
minimum 10% of the cost of work i.e., each JV member must have satisfactorily
Allowed
1 completed during the last 07 (seven) years, ending last of month previous to the one in No No
(Mandatory)
which tender is invited, one similar single work for a minimum of 10% of advertised value
of the tender. Note:-Value of a completed work done by a Member in an earlier JV shall
be reckoned only to the extent of the concerned member's share in that JV for the
purpose of satisfying his/her compliance to the above mentioned technical eligibility
criteria in the tender under consideration

Special Financial Criteria

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Financial Eligibility Criteria(For JV ): The JV shall satisfy the requirement of "Financial
Eligibility" mentioned at para 1.2 OF detailed NIT provided in tender document. The
"financial capacity" of the lead partner of JV shall not be less than 51% of the financial
eligibility criteria mentioned at para 1.2 OF detailed NIT provided in tender document.
Allowed
1 The arithmetic sum of individual "financial capacity" of all the members shall be taken as No No
(Mandatory)
JV's "financial capacity" to satisfy this requirement. Note: Contractual payment received
by a Member in an earlier JV shall be reckoned only to the extent of the concerned
member's share in that JV for the purpose of satisfying compliance of the
abovementioned financial eligibility criteria in the tender under consideration.

Special Financial Criteria

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Bid Capacity(For JV): The JV shall satisfy the requirement of "Bid Capacity" requirement
mentioned at para 1.3 of detailed NIT provided in the tender document. The arithmetic Allowed
1 No No
sum of individual "Bid capacity" of all the members shall be taken as JV's "Bid capacity" (Mandatory)
to satisfy this requirement.

Special Technical Criteria

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Earnest Money and cost of tender document = NIL. The tenderer(s) have to submit the
BID SECURITY DECLARATION in this regard in lieu of earnest money deposit as per Allowed
1 No No
the form annexed vide "Annexure-V" in tender documents, otherwise offer will be (Mandatory)
'summarily rejected' Annexure 'V' is uploaded

Submission of Document Verification Certificate

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Please submit a certificate in the prescribed format (please download the format from the
link given below) for verification / confirmation of the documents submitted for
compliance of eligibility / qualifying criteria. Non submission of the certificate, or Allowed
1 No No
submission of certificate either not properly filled in, or in a format other than the (Mandatory)
prescribed format shall lead to summary rejection of your offer.
( Click here to download the Format of Self Certificatio)

5. COMPLIANCE

Important : All documents uploaded and remarks / confirmation entered by the bidders against any compliance
condition shall be opened as part of technical bid only.

Check Lst

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
1 Whether cost of tender document deposited. No No Not Allowed

Pa g e 19 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15

 CAO-C-HQ-ENGINEERING/SOUTH EAST CENTRAL RLY
TENDER DOCUMENT
Tender No: CEC-BSP-21-22-07 Closing Date/Time: 06/09/2021 15:00

2 Whether cost of Earnest Money deposited. No No Not Allowed

Commercial-Compliance

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
Please enter the percentage of local content in the material being offered.
Please enter 0 for fully imported items, and 100 for fully indigenous items. The Allowed
1 No Yes
definition and calculation of local content shall be in accordance with the Make (Optional)
in India policy as incorporated in the tender conditions.

Undertakings

S.No. Description Confirmation Remarks Documents

Required Allowed Uploading
I/ We have visited the works site and I / We am / are aware of the site
1 No No Not Allowed
conditions.

6. Documents attached with tender

S.No. Document Name Document Description

1 Tenderdoc21-22-07.pdf Tender doc CEC BSP 21 22 07
2 ANNUXUREV.pdf annexure V

This tender complies with Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by
Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no.
2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017 and amendments/ revisions thereof.

As a Tender Inviting Authority, the undersigned has ensured that the issue of this tender does not violate provisions of
GFR regarding procurement through GeM.

Signed By: RAM NARESH

Designation : XENCon/T S

Pa g e 2 0 o f 2 0 Ru n Da te/Time: 0 6 /0 8 /2 0 2 1 17:5 0 :15