WDM9000 Energy Power Control Application
WDM9000 Energy Power Control Application
Antenna
Ideal to turn on/off the wind
turbines or the solar panels if
generating to much electricity!!!
Ethernet
PC/PLC/Controller
Wind turbines
Office building
Solar panels
Wir
ele W
ss ire
le
ss
Antenna
Wire in mast
less
Office
Professional Radio Communication
The WDM9000 Wireless Data Modem is built into a robust metal housing, which can be mounted on a flat surface.
The BNC connector of the WDM9000 gives the option to mount the antenna either directly on the modem or using an
external antenna. (We recommend that you use an antenna that have a VSWR better than 2.0)
The WDM9000 is a unique digital radio modem with high data speed and longer range.
Ideal for transmitting and receiving data information.
Specifications:
Transceiver UHF
*EXAMPLE OF A POINT-TO-POINT OR POINT-TO-MULTIPOINT SETUP
Frequency Range 406-470 MHz
Channel spacing 25 KHz
RF-bandwidth 64 MHz
Mode of operation Simplex / Semi-duplex
RX/TX delay 2 ms simplex/semi-duplex
Receiver
Sensitivity @ 80% @ 32Kb/s -111 dBm (4QAM)
succesfull message ratio @ 64Kb/s -104 dBm (16QAM) UP TO
50 KM
Transmitter RANGE
Output power @ 4QAM High: 15 Watt peak power @ 13,2V
Low: 2 Watt peak power @ 13,2V
Modulation 4QAM or 16QAM
CONTROL CONTROL
UNIT UNIT
Data modem
Interface RJ45 Ethernet (10/100 Mbps)
Buffer size 16Kbytes
These specifications are in conformity with the European R&TTE Directive 1999/5/EC and meets the harmonized Standard EN 302 561 and CE approved.
Dealer:
TPRADIO
Agenavej 37, DK - 2670 Greve
Phone: +45 43 90 60 48, Fax: +45 43 90 52 07
Mail: [email protected], Web: www.tpradio.dk
TP Radio reserve the right to amend specifications without prior notice.*
13.11.2018