Scribd
Upload
197 views

Max - RPM Curve No. Impeller Type: KW 152 D 60 DD 110 102 EE 225 E 120

The document provides specifications for a pump model including: 1) The maximum rpm is 1400 and the curve number is WPA64A03A. 2) The impeller type is closed, with an impeller diameter of 365mm and maximum solid diameter of 33mm. 3) Dynamic sealing reduces efficiency by up to 5% compared to packing seals, and different impeller structures can also cause efficiency discrepancies. 4) The manufacturer reserves the right to change performance curves without notice.

Uploaded by

Vf Mauro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
197 views

Max - RPM Curve No. Impeller Type: KW 152 D 60 DD 110 102 EE 225 E 120

The document provides specifications for a pump model including: 1) The maximum rpm is 1400 and the curve number is WPA64A03A. 2) The impeller type is closed, with an impeller diameter of 365mm and maximum solid diameter of 33mm. 3) Dynamic sealing reduces efficiency by up to 5% compared to packing seals, and different impeller structures can also cause efficiency discrepancies. 4) The manufacturer reserves the right to change performance curves without notice.

Uploaded by

Vf Mauro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Max.rpm 1400 Curve No.

WPA64A03A
Impeller Liner
POLIU Impeller Type
CLOSED
Impeller Dia. mm ALVES Max Solid Dia. mm
365 5 33

Pump Model Dia. mm Frame Type KW Max Impeller Dia. mm GLAND SEAL
D 60 400 In terms of different sealing types,the efficiency of pumps is different

100 Inlet 152


DD 110 Impeller Part No.
for dynamic sealing, the efficiency will reduce at most 5% comparing
with packing seal. Also, different structures of impellers cause to
efficiency discrepancy. We reserve the right to change the

E 120 E4147R performance curve without the advance notice.

INP Outlet 102


EE 225
The power marked above refers to the maximum power that the bearing assembly can transfer,rather than the fitted motor power.The speed corresponding to highest curve is the
maximum which the pump can bear. Please consult with the manufacturer if the pump you required is beyond the maximum speed.The capacity shown in the curve results from
experimental data in conformity to Standard GB3216 Class C(ISO2548 Grade C), using clear water as pumped medium. When the med ium is not clear water,please consider the
effect on capacity caused by medium density,viscosity and solid character. Please contact with manufacturer if necessary.

50
mtrs

40.0

50.0

45
57.0

1350
63.0

66.5

69.5

40
70.5
1250

71.0

70.5
35

67.0
1150

66.0
30

1050

25

950

20

850

15
750

10 650

1350

N
750
P
S
000 m3/hr H
0 50 100 150 200 250 300 350 400 450 500 r

You might also like