Scribd
Upload
81 views4 pages

DC2687 Double Block & Bleed Technical Specifications

This document provides technical specifications for double block bleed valves in pipe sizes ranging from 3/4" to 6". It includes the part numbers, dimensions, material specifications and weights for each size and pressure class. Key dimensions listed are plug outer diameter, shaft dimensions, distance between seals, seal thickness and overall length. Notes provide additional information on standard seal materials, maximum pressures and gauge exclusion.

Uploaded by

Bruno Pacheco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views4 pages

DC2687 Double Block & Bleed Technical Specifications

This document provides technical specifications for double block bleed valves in pipe sizes ranging from 3/4" to 6". It includes the part numbers, dimensions, material specifications and weights for each size and pressure class. Key dimensions listed are plug outer diameter, shaft dimensions, distance between seals, seal thickness and overall length. Notes provide additional information on standard seal materials, maximum pressures and gauge exclusion.

Uploaded by

Bruno Pacheco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

EXPANSION SEAL TECHNOLOGIES DC2687 11/05

PAGE 1 OF 4
Double Block Bleed (3/4"-1 1/4") - Technical Specifications

Shaft Hex Hex Nut


Seal to Pipe Distance Between L2 - Seal Approx. Shipping
Pipe Pipe Plug OD Shaft OD Shaft ID Wrench Wrench Length L1
Part Number Clearance Seals Thickness Weight
Size Schedule Size (4) Size

(in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (in) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lb) (kg)
160 DBB-1PXXS / 75P160 0.56 14.2 0.05 1.3 1/4 6.4 0.12 3.0 N/A 7/16 21 1/2 546.1 1 1/4 31.8 12 304.8 1/4 6.4 2 0.9
80 DBB-75P80 0.67 17.0 0.07 1.8 5/16 8.0 0.07 1.9 N/A 7/16 23 1/2 596.9 1 1/2 38.1 12 3/8 314.3 1/2 12.7 3 1.4
3/4"
40 DBB-1P160 / 75P40 0.75 19.1 0.07 1.8 5/16 8.0 0.07 1.9 N/A 7/16 23 1/2 596.9 1 1/2 38.1 12 3/8 314.3 1/2 12.7 3 1.4
10 DBB-75P10 0.81 20.6 0.07 1.8 5/16 8.0 0.07 1.9 N/A 7/16 23 1/2 596.9 1 1/2 38.1 12 3/8 314.3 1/2 12.7 3 1.4
XXS DBB-1PXXS / 75P160 0.56 14.2 0.04 1.0 1/4 6.4 0.12 3.0 N/A 7/16 21 1/2 546.1 1 1/4 31.8 12 304.8 1/4 6.4 2 0.9
160 DBB-1P160 / 75P40 0.75 19.1 0.07 1.8 5/16 8.0 0.07 1.9 N/A 7/16 23 1/2 596.9 1 1/2 38.1 12 3/8 314.3 1/2 12.7 3 1.4
1" 80 DBB-1P80 0.87 22.1 0.09 2.3 5/16 8.0 0.07 1.9 N/A 7/16 23 1/2 596.9 1 1/2 38.1 12 3/8 314.3 1/2 12.7 4 1.8
40 DBB-1P40 0.96 24.4 0.09 2.3 5/16 8.0 0.07 1.9 N/A 7/16 23 1/2 596.9 1 1/2 38.1 12 3/8 314.3 1/2 12.7 4 1.8
10 DBB-1P10 1.01 25.7 0.09 2.3 5/16 8.0 0.07 1.9 N/A 7/16 23 1/2 596.9 1 1/2 38.1 12 3/8 314.3 1/2 12.7 4 1.8
160 DBB-125P160 1.06 26.9 0.10 2.5 3/8 9.5 0.11 2.7 N/A 1/2 24 3/4 628.7 1 1/2 38.1 12 1/2 317.5 1 25.4 6 2.7
80 DBB-125P80 1.18 30.0 0.10 2.5 3/8 9.5 0.11 2.7 N/A 1/2 24 3/4 628.7 1 1/2 38.1 12 1/2 317.5 1 25.4 7 3.2
1-1/4"
40 DBB-125P40 1.28 32.5 0.10 2.5 3/8 9.5 0.11 2.7 N/A 1/2 24 3/4 628.7 1 1/2 38.1 12 1/2 317.5 1 25.4 7 3.2
10 DBB-125P10 1.34 34.0 0.10 2.5 3/8 9.5 0.11 2.7 N/A 1/2 24 3/4 628.7 1 1/2 38.1 12 1/2 317.5 1 25.4 7 3.2

Notes:
1 - Standard Seal Material = Urethane
Alternate Seal materials are available upon request
2 - Maximum Pressure between seals = 1125 psi / 77.6 bar
3 - Maximum Upstream Pressure = 10 psi / 0.7 bar
4 - If Shaft Hex Wrench size is not specified, shaft is designed accomodate a pipe wrench
5 - Pressure Gauge not included

[email protected] www.estgrp.com
EXPANSION SEAL TECHNOLOGIES DC2687 11/05
PAGE 2 OF 4
Double Block Bleed (1 1/2"-6") - Technical Specifications

Shaft Hex Hex Nut


Seal to Pipe Distance Between L2 - Seal Approx. Shipping
Pipe Pipe Plug OD Shaft OD Shaft ID Wrench Wrench Length L1
Part Number Clearance Seals Thickness Weight
Size Schedule Size (4) Size
(in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (in) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lb) (kg)
160 DBB-15P160 1.24 31.5 0.10 2.5 1/2 12.7 1/8 3.2 N/A 3/4 27 685.8 2 1/2 63.5 13 330.2 1 25.4 4 1.8
80 DBB-2PXXS / 15P80 1.40 35.6 0.10 2.5 1/2 12.7 1/8 3.2 N/A 3/4 27 685.8 2 1/2 63.5 13 330.2 1 25.4 4 1.8
1-1/2"
40 DBB-15P40 1.51 38.4 0.10 2.5 1/2 12.7 1/8 3.2 N/A 3/4 27 685.8 2 1/2 63.5 13 330.2 1 25.4 4 1.8
10 DBB-2P160 / 15P10 1.58 40.1 0.10 2.5 1/2 12.7 1/8 3.2 N/A 3/4 27 685.8 2 1/2 63.5 13 330.2 1 25.4 4 1.8
XXS DBB-2PXXS / 15P80 1.40 35.6 0.10 2.5 1/2 12.7 1/8 3.2 N/A 3/4 27 685.8 2 1/2 63.5 13 330.2 1 25.4 4 1.8
160 DBB-2P160 / 15P10 1.58 40.1 0.11 2.8 1/2 12.7 1/8 3.2 N/A 3/4 27 685.8 2 1/2 63.5 13 330.2 1 25.4 4 1.8
2" 80 DBB-2P80 1.84 46.7 0.10 2.5 5/8 15.9 1/4 6.4 N/A 7/8 28 1/2 723.9 2 1/2 63.5 14 1/5 360.4 1 25.4 5 2.3
40 DBB-2P40 1.97 50.0 0.10 2.5 5/8 15.9 1/4 6.4 N/A 7/8 28 1/2 723.9 2 1/2 63.5 14 3/16 360.4 1 25.4 5 2.3
10 DBB-2P10 2.06 52.3 0.10 2.5 5/8 15.9 1/4 6.4 N/A 7/8 28 1/2 723.9 2 1/2 63.5 14 3/16 360.4 1 25.4 6 2.7
160 DBB-25P160 2.03 51.6 0.10 2.5 5/8 15.9 1/4 6.4 N/A 7/8 28 1/2 723.9 2 1/2 63.5 14 3/16 360.4 1 25.4 6 2.7
80 DBB-3PXXS / 25P80 2.20 55.9 0.12 3.0 7/8 22.2 3/8 9.5 N/A 1 1/4 29 736.6 2 1/2 63.5 14 3/16 360.4 1 25.4 8 3.6
2-1/2"
40 DBB-25P40 2.37 60.2 0.10 2.5 7/8 22.2 3/8 9.5 N/A 1 1/4 29 736.6 2 1/2 63.5 14 3/16 360.4 1 25.4 9 4.1
10 DBB-3P160 / 25P10 2.53 64.3 0.11 2.8 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 17 431.8 1 25.4 17 7.7
XXS DBB-3PXXS / 25P80 2.20 55.9 0.10 2.5 7/8 22.2 3/8 9.5 N/A 1 1/4 29 736.6 2 1/2 63.5 14 3/16 360.4 1 25.4 8 3.6
160 DBB-3P160 / 25P10 2.53 64.3 0.10 2.5 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 17 431.8 1 25.4 17 7.7
3" 80 DBB-3P80 2.80 71.1 0.10 2.5 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 17 431.8 1 25.4 18 8.2
40 DBB-3P40 2.97 75.4 0.10 2.5 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 17 431.8 1 25.4 18 8.2
10 DBB-3P10 3.14 79.8 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 17 431.8 1 25.4 19 8.6
XXS DBB-4PXXS 3.03 77.0 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 17 431.8 1 25.4 18 8.2
160 DBB-4P160 3.32 84.3 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 15 381.0 1 3/4 44.5 22 10.0
120 DBB-4P120 3.51 89.2 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 15 381.0 1 3/4 44.5 23 10.4
4"
80 DBB-4P80 3.71 94.2 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 15 381.0 1 3/4 44.5 24 10.9
40 DBB-4P40 3.91 99.3 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 15 381.0 1 3/4 44.5 25 11.3
10 DBB-4P10 4.14 105.2 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 15 381.0 1 3/4 44.5 26 11.8
160 DBB-6P160 5.07 128.8 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 14 13/16 376.2 1 3/4 44.5 34 15.4
120 DBB-6P120 5.38 136.7 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 14 13/16 376.2 1 3/4 44.5 37 16.8
6" 80 DBB-6P80 5.64 143.3 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 14 13/16 376.2 1 3/4 44.5 39 17.7
40 DBB-6P40 5.95 151.1 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 14 13/16 376.2 1 3/4 44.5 42 19.1
10 DBB-6P10 6.24 158.5 0.12 3.0 1 1/4 31.8 1/2 12.7 13/16 1 13/16 33 5/8 854.1 2 1/2 63.5 14 13/16 376.2 1 3/4 44.5 44 20.0

Notes:
1 - Standard Seal Material = Urethane
Alternate Seal materials are available upon request
2 - Maximum Pressure between seals = 1125 psi / 77.6 bar
3 - Maximum Upstream Pressure = 10 psi / 0.7 bar
4 - If Shaft Hex Wrench size is not specified, shaft is designed accomodate a pipe wrench
5 - Pressure Gauge, 50FT hose, and T-fitting not included

[email protected] www.estgrp.com
EXPANSION SEAL TECHNOLOGIES DC2687 11/05
PAGE 3 OF 4
Double Block Bleed (8"-12") - Technical Specifications

Hex Nut Approx.


Seal to Pipe Distance L2 - Seal
Pipe Pipe Plug OD Shaft OD Wrench Length L1 Shipping
Part Number Clearance Between Seals Thickness
Size Schedule Size Weight

(in) (mm) (in) (mm) (in) (mm) (in) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lb) (kg)
160 DBB-8P160 6.56 166.6 0.25 6.4 7/8 22.2 1 7/16 11 1/4 285.8 4 101.6 3/4 19.1 1 3/4 44.5 29 13.2
XXS DBB-8PXXS 6.63 168.4 0.25 6.4 7/8 22.2 1 7/16 11 1/4 285.8 4 101.6 3/4 19.1 1 3/4 44.5 30 13.6
140 DBB-8P140 6.75 171.5 0.25 6.4 7/8 22.2 1 7/16 11 1/4 285.8 4 101.6 3/4 19.1 1 3/4 44.5 31 14.1
120 DBB-8P120 6.94 176.3 0.25 6.4 7/8 22.2 1 7/16 11 1/4 285.8 4 101.6 3/4 19.1 1 3/4 44.5 32 14.5
100 DBB-8P100 7.19 182.6 0.25 6.4 7/8 22.2 1 7/16 11 1/4 285.8 4 101.6 3/4 19.1 1 3/4 44.5 34 15.4
8"
80 DBB-8P80 7.38 187.5 0.25 6.4 7/8 22.2 1 7/16 11 1/4 285.8 4 101.6 3/4 19.1 1 3/4 44.5 36 16.3
60 DBB-8P60 7.56 192.0 0.25 6.4 1 25.4 1 5/8 11 1/2 292.1 4 101.6 3/4 19.1 1 3/4 44.5 39 17.7
40/STD DBB-8P40 7.73 196.3 0.25 6.4 1 25.4 1 5/8 11 1/2 292.1 4 101.6 3/4 19.1 1 3/4 44.5 40 18.1
20 DBB-8P20 7.88 200.2 0.25 6.4 1 25.4 1 5/8 11 1/2 292.1 4 101.6 3/4 19.1 1 3/4 44.5 41 18.6
10 DBB-8P10 8.08 205.2 0.25 6.4 1 25.4 1 5/8 11 1/2 292.1 4 101.6 3/4 19.1 1 3/4 44.5 43 19.5
100 DBB-10P100 9.06 230.1 0.25 6.4 1 25.4 1 5/8 11 1/2 292.1 4 101.6 3/4 19.1 1 3/4 44.5 52 23.6
80 DBB-10P80 9.31 236.5 0.25 6.4 1 25.4 1 5/8 11 1/2 292.1 4 101.6 3/4 19.1 1 3/4 44.5 54 24.5
10" 60/XS DBB-10PXS 9.50 241.3 0.25 6.4 1 25.4 1 5/8 11 1/2 292.1 4 101.6 3/4 19.1 1 3/4 44.5 56 25.4
40/STD DBB-10P40 9.77 248.2 0.25 6.4 1 25.4 1 5/8 11 1/2 292.1 4 101.6 3/4 19.1 1 3/4 44.5 58 26.3
10 DBB-10P10 10.17 258.3 0.25 6.4 1 25.4 1 5/8 11 1/2 292.1 4 101.6 3/4 19.1 1 3/4 44.5 62 28.1
80 DBB-12P80 11.00 279.4 0.38 9.7 1 25.4 1 5/8 11 1/2 292.1 4 101.6 3/4 19.1 1 3/4 44.5 75 34.0
12"
40/STD DBB-12P40 11.62 295.1 0.38 / 0.32 9.7 / 8.1 1 25.4 1 5/8 11 1/2 292.1 4 101.6 3/4 19.1 1 3/4 44.5 83 37.6

Notes:
1 - Standard Seal Material = Urethane
Alternate Seal materials are available upon request
2 - Maximum Pressure between seals = 1125 psi / 77.6 bar
3 - Maximum Upstream Pressure = 10 psi / 0.7 bar
4 - Pressure Gauge, 50FT hose, and T-fitting not included

[email protected] www.estgrp.com
EXPANSION SEAL TECHNOLOGIES DC2687 11/05
PAGE 4 OF 4
Double Block Bleed (14"-24") - Technical Specifications

Hex Nut
Seal to Pipe Distance L2 - Seal Approx.
Pipe Pipe Plug OD Shaft OD Wrench Length L1
Part Number Clearance Between Seals Thickness Shipping Weight
Size Schedule Size

(in) (mm) (in) (mm) (in) (mm) (in) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (lb) (kg)
80 DBB-14P80 12.12 307.8 0.38 9.7 1 25.4 1 5/8 12 304.8 4 1/2 114.3 3/4 19.1 1 3/4 44.5 91 41.3
14" 40 DBB-14P40 12.74 323.6 0.38 9.7 1 25.4 1 5/8 12 304.8 4 1/2 114.3 3/4 19.1 1 3/4 44.5 98 44.5
30/STD DBB-14PSTD 12.87 326.9 0.38 9.7 1 25.4 1 5/8 12 304.8 4 1/2 114.3 3/4 19.1 1 3/4 44.5 100 45.4
80 DBB-16P80 13.93 353.8 0.38 9.7 1 25.4 1 5/8 12 304.8 4 1/2 114.3 3/4 19.1 1 3/4 44.5 117 53.1
16" 40/XS DBB-16P40 14.62 371.3 0.38 9.7 1 25.4 1 5/8 12 304.8 4 1/2 114.3 3/4 19.1 1 3/4 44.5 126 57.2
30/STD DBB-16PSTD 14.87 377.7 0.38 9.7 1 25.4 1 5/8 12 304.8 4 1/2 114.3 3/4 19.1 1 3/4 44.5 131 59.4
80 DBB-18P80 15.74 399.8 0.38 9.7 1 25.4 1 5/8 12 304.8 4 1/2 114.3 3/4 19.1 1 3/4 44.5 145 65.8
18" 40 DBB-18P40 16.50 419.1 0.38 9.7 1 25.4 1 5/8 12 304.8 4 1/2 114.3 3/4 19.1 1 3/4 44.5 156 70.8
STD DBB-18PSTD 16.87 428.5 0.38 9.7 1 25.4 1 5/8 12 304.8 4 1/2 114.3 3/4 19.1 1 3/4 44.5 164 74.4
80 DBB-20P80 17.56 446.0 0.38 9.7 1 25.4 1 5/8 12 1/8 308.0 4 1/2 114.3 1 25.4 1 3/4 44.5 192 87.1
20" 40 DBB-20P40 18.43 468.1 0.38 9.7 1 25.4 1 5/8 12 1/8 308.0 4 1/2 114.3 1 25.4 1 3/4 44.5 209 94.8
20/STD DBB-20PSTD 18.87 479.3 0.38 9.7 1 25.4 1 5/8 12 1/8 308.0 4 1/2 114.3 1 25.4 1 3/4 44.5 215 97.5
22" 80 DBB-22P80 19.37 492.0 0.38 9.7 1 25.4 1 5/8 12 1/8 308.0 4 1/2 114.3 1 25.4 1 3/4 44.5 225 102.1
80 DBB-24P80 21.18 538.0 0.38 9.7 1 25.4 1 5/8 12 1/8 308.0 4 1/2 114.3 1 25.4 1 3/4 44.5 265 120.2
24" 40 DBB-24P40 22.24 564.9 0.38 9.7 1 25.4 1 5/8 12 1/8 308.0 4 1/2 114.3 1 25.4 1 3/4 44.5 287 130.2
20/STD DBB-24PSTD 22.87 580.9 0.38 9.7 1 25.4 1 5/8 12 1/8 308.0 4 1/2 114.3 1 25.4 1 3/4 44.5 302 137.0

Notes:
1 - Standard Seal Material = Urethane
Alternate Seal materials are available upon request
2 - Maximum Pressure between seals = 1125 psi / 77.6 bar
3 - Maximum Upstream Pressure = 10 psi / 0.7 bar
4 - Pressure Gauge, 50FT hose, and T-fitting not included

[email protected] www.estgrp.com

You might also like