Gate, Globe & Check Valves

Forged Steel

ASME Class 150 - 2500, 8mm - 50mm (1/4” - 2”), API 6D

API 602 | BS 5352 | BS 6364 | ASME B16.34 | MSS SP 84
Pressure testing as per API 598 - for ASTM A105 and LF2* - for other materials

Technical Information
H Y D R O S T A T I C A I R Working Pressure (in psi)
Seat Closure ASME F304,
Valve ASME Shell Back Seat Seat F5,F9 F304L,
Class F316,
Type Class High Pressure Low Pressure F11,F22 F321, F316L
psi kg/cm2 psi kg/cm2 psi kg/cm2 psi kg/cm2 psi kg/cm2 F347
150 450 32 315 22 - - - - 90 6.3 Shell 450 425 350
300 1125 79 815 57 - - - - 90 6.3 150
Seat 320 305 255
Gate 600 2225 156 1630 115 - - - - 90 6.3 Shell 1125 1100 900
800 3000 211 2200 155 - - - - 90 6.3 300
Seat 825 795 660
1500 5575 392 4080 287 - - - - 90 6.3
Shell 2250 2175 1800
150 450 32 315 22 315 22 - - 90 6.3 600
Seat 1650 1585 1320
300 1125 79 815 57 815 57 - - 90 6.3
Globe Shell 3000 2900 2400
600 2225 156 1630 115 1630 115 - - 90 6.3 800
800 3000 211 2200 155 2200 155 - - 90 6.3 Seat 2200 2115 1760
150 450 32 - - 315 22 80 6 - - Shell 5625 5400 4500
1500
300 1125 79 - - 815 57 210 15 - - Seat 4125 3960 3300
Check
600 2225 156 - - 1630 115 410 29 - -
800 3000 211 - - 2200 155 550 39 - -
B’Sealed 800 3000 211 2200 155 - - - - 90 6.3
Gate
B’Sealed 800 3000 211 2200 155 2200 155 - - 90 6.3
Globe

* Test pressure values are for ASTM A105 and LF2 materials of construction.
For other materials, substitute corresponding figures from the table alongside. For
check valves, low pressure hydrostatic closure test is carried out at 25% of the high
pressure closure test.

Compliance Standards
Face-to-face Pressure / Temp. Valve inspection
Valve Type Valve Design dimension End Connection rating** and testing

API 602* ASME B1.20.1 (NPT) • BS 21 / ISO 7 API 602 API 598
Gate Valves L&T Standard (screwed - taper)
BS 5352 (screwed/socket-weld/
ASME B16.34 BS 5352
butt-weld)
BS 2779 / ISO 228 • BS 21 / ISO 7
Globe and (screwed - parallel) BS 5352 API 598
Check Valves BS 5352* ASME B16.10 ASME B16.11 ASME B16.34 BS 5352
BS 2080 (socket-weld)
Cryo Gate & (flanged) BS 6364
BS 6364 ASME B16.5 RF 125-250 Ra BS 6364
Globe Valves (flanged) API 598 BS 5352
Y-Globe and ASME B16.34 see page 10
L&T Standard ASME 16.34 API 598
Check Valves MSS SP 84
For Class 150 valves, the flange drilling dimensions will be as per Class 150 and all other dimensions as per Class 300.
End flanges are welded onto the body.
Bellows-Sealed Gate and Globe valves conform to BS 5352.
Socket-weld Class 800 Reduced Bore valves conform to Class 3000 (or Sch.80/Sch.XS) fit tings of ASME B16.11.
Socket-weld Class 800 Full Bore valves conform to Class 6000 (or Sch.160) fit tings of ASME B16.11.
Socket-weld Class 1500 Standard Port valves conform to Class 9000 (or Sch.X XS) fit tings of ASME B16.11.
*Full Bore design also conforms to ASME B16.34 ** API 602/BS 5352 for Class 800 and ASME B16.34 for Class 150/300/600/1500/2500.

Ordering Information - Straight-pattern Valves

Size Valve Type Pressure Class End Connection Trim Body Material Options
1/4” 2 - Gate 1 - Class 150 1 -
Screwed NPT 01 - 13% Cr. NIL - A105 NIL - Reduced / Standard Bore
3/8” 5 - Globe 3 - Class 300 2 -
Socket-weld 05 - HF LF2 FB - Full Bore
1/2” 8 - Check 5 - Class 1500 3 -
Flanged 08 - 13% Cr. HF F5 WB - Welded Bonnet
3/4” 6 - Class 600 4 -
Screwed BSP F11 LA - Locking Arrangement
1” 8 - Class 800 parallel F22 E - Electrical Actuator
API Trim Nos.
11/4” 5 - Screwed BSP
10, 12, etc., F304 / F304L BS - Bellows-Sealed
11/2” taper
also available F316 / F316L CR - Cryogenic
2” F347
Monel
Ordering Information - Y-pattern Valves
Size Valve type Pressure Class End Connection Trim Body material Options
15 - 15mm GLOBE 15- Class 1500 3 - Butt-weld U - Hardfaced NIL - A105 NIL - Standard
F316
6 - Scr. Bonnet 25- Class 2500 4 - Screwed NPT seating F11 IBR - IBR-certified
20 - 20mm F316L
7 - Seal-welded 5 - Socket-weld surface F22 F347
25 - 25mm Bonnet
40 - 40mm CHECK Familiarity with our catalogue numbering is not necessary when specif ying or ordering our valves. A full
50 - 50mm 8 - Scr. Cap description of the valve provided by you is translated into a catalogue number as per the system shown.
9 - Seal-welded
Cap For any other special requirement, add SPL to the catalogue number and provide details. 03
L&T Straight-pattern Valves Straight-pat tern Gate/Globe/Check Valves
Salient features
• Bolted body-bonnet design for valves up to Class 800.
Valves with welded bonnet also available on request
• Screwed with seal-welded body-bonnet design
for valves of Class 1500
• Bellows-sealed Gate and Globe valves available in Class
800
• Bolted body-bonnet joints provided with spiral-wound
stainless steel gasket and graphite filler for maximum
protection against leaks
• Die-formed graphite inner packing rings and braided
graphite end rings with Inconel wire reinforcement and
corrosion inhibitor
• T-head stem-disc connection of gate valve fully meets
strength requirements of API 602 and API 598
• Rolled ACME thread on stem for smooth operation
• Tapered shoulder on the stem for back seating
• Self-aligning type gland assembly with stud-and-nut
tightening
• Integral hard-faced body seat for globe and check valves
• Spring-loaded disc on check valves suitable for non-
horizontal applications too
• Gate and globe valves can be of fered with electrical
actuators
• Austenitic SS forging for body and bonnet of Cryogenic
valves, resulting in excellent impact strength, minimal heat
loss and resistance to corrosion
• Valves can be of fered to NACE MR-0175 and other special
NACE requirements
• Valves can be supplied with IBR certification

Body and Trim Combinations

Body & Bonnet/Cover Trim numbers
ASTM A105 01 / 08 / 05
ASTM A182 Gr. F5 08 / 05
ASTM A182 Gr. F9 08 / 05
ASTM A182 Gr. F11 08 / 05
ASTM A182 Gr. F22 08 / 05
ASTM A182 Gr. F304 02 / 15
ASTM A182 Gr. F316 10 / 12 / 16
ASTM A350 Gr. LF2 08 / 16
Other materials of construction such as F316L / F304L also available.

Trim Materials
L&T Forged Steel Valves are of fered with trims shown below, to suit a variety of services.
Trim No. Stem Seating Surfaces
Valve Type
(API 602) Material Disc Body Seat
01 Gate Valves ASTM A479 Type 410 13% Cr. Steel 13% Cr. Steel
05 Gate, Globe and Check Valves ASTM A479 Type 410 HF HF

08 Gate, Globe and Check Valves ASTM A479 Type 410 13% Cr. Steel HF

02 Gate Valves ASTM A479 Type 304 SS 304 SS 304

10 Gate Valves ASTM A479 Type 316 SS 316 SS 316

12 Gate, Globe and Check Valves ASTM A479 Type 316 SS 316 HF

15 Gate, Globe and Check Valves ASTM A479 Type 304 SS 304 + HF HF

16 Gate, Globe and Check Valves ASTM A479 Type 316 SS 316 + HF HF

04 HF - Hard Faced with Cobalt-Chromium-Tungsten alloy (Stellite #6)

Gate Valves Material Specification (Typical for Fig No. 28101)

L&T Straight-pattern Valves

Sl. No. Part Description Specification
1 Body ASTM A105
2 Bonnet ASTM A105
3 Stem ASTM A479 Type 410
4 Wedge Disc ASTM A217 Gr. CA15
5 Body Seat Ring ASTM A276 Type 410
Graphite moulded rings with
6 Stem packing
braided top / bottom rings
Spiral-wound SS type 304
7 Gasket
with graphite filler
8 Cap Screws ASTM A193 Gr. B7
9 Gland Bush ASTM A276 Type 410
10 Gland Flange ASTM A105
ASTM A276 Type 410 /
11 Gland Stud / Nut ASTM A194 Gr. 2H
12 Yoke Sleeve ASTM A582 Type 416
13 Identification Plate Aluminium (anodised)
14 Handwheel SG Iron / Steel
15 Handwheel Nut Steel

Screwed/Socket-weld ends (in inches, unless specified)

Class Valve size C L
B
A S S
C
8 0 0 G A T E
F
V A L
G
V E S
App. Wt. (kg)
A D (min) E
800 inch (mm) RB FB RB FB RB FB RB FB RB FB
1/4 (8)** 3.15 6.0 - 1/4 - 0.555 0.38 3.25 - 0.25 - 1.6 -
3/8 (10) 3.15 6.0 6.0 3/8 0.690 0.38 3.25 3.25 0.25 0.38 1.6 1.6
1/2 (15) 3.15 6.0 6.2 1/2 0.855 0.38 3.25 3.25 0.38 0.50 1.6 2.0
3/4 (20) 3.35 6.2 7.5 3/4 1.065 0.50 3.25 4.00 0.50 0.71 2.0 3.1
1 (25) 3.94 7.5 10.0 1 1.330 0.50 4.00 5.50 0.71 0.94 3.1 6.1
11/4 (32) 4.70 10.0 10.0 11/4 1.675 0.50 5.50 5.50 0.94 1.19 6.1 6.0
11/2 (40) 4.70 10.0 11.4 11/2 1.915 0.50 5.50 7.25 1.19 1.44 6.0 9.1
2 (50)** 5.12 11.4 - 2 - 2.406 0.62 7.25 - 1.44 - 9.1 -

Flanged ends (in inches, unless specified)

C L A S S 6 0 0 G A T E V A L V E S
Class 600 Valve size
B øD øF App. Wt. (kg)
inch (mm) A C E
RB FB RB FB RB FB RB FB
1/2 (15) 6.5 6.0 6.2 3.75 0.50 0.62 0.56 3.25 3.25 3.5 5.1
3/4 (20) 7.5 6.2 7.5 4.62 0.75 0.82 0.62 3.25 4.00 5.1 7.1
1 (25) 8.5 7.5 10.0 4.88 1.00 1.05 0.69 4.00 5.50 7.1 11.3
11/4 (32) 9.0 10.0 10.0 5.25 1.25 1.38 0.81 5.50 5.50 11.3 13.5
11/2 (40) 9.5 10.0 11.4 6.12 1.50 1.61 0.88 5.50 7.25 13.5 19.2
2 (50) 11.5 11.4 - 6.50 2.00 - 1.00 7.25 - 19.2 -

Flanged ends (in inches, unless specified)

Class 150/300 Valve size
C L A S S
B
1 5 0 / 3 0 0
C
G A T E V A L V E S
øF
inch (mm) A øD E
RB FB Class 150 Class 300 RB FB
1/2 (15) 5.5 6.0 6.2 3.50 3.75 0.62 0.56 3.25 3.25
3/4 (20) 6.0 6.2 7.5 3.88 4.62 0.82 0.62 3.25 4.00
1 (25) 6.5 7.5 10.0 4.25 4.88 1.05 0.69 4.00 5.50
11/4 (32) 7.0 10.0 10.0 4.62 5.25 1.38 0.75 5.50 5.50
11/2 (40) 7.5 10.0 11.4 5.00 6.12 1.61 0.81 5.50 7.25
2 (50) 8.5 11.4 - 6.00 6.50 2.07 0.88 7.25 -
05
 Gate Valves Material Specification (Typical for Fig No. 25101)
L&T Straight-pattern Valves
Sl. No. Part Description Specification

1 Body ASTM A105

2 Bonnet ASTM A105
3 Stem ASTM A479 Type 410
4 Wedge Disc ASTM A217 Gr. CA15
5 Body Seat Ring ASTM A276 Type 410
Spiral-wound SS type 304
6 Gasket
with graphite filler
Graphite moulded rings with
7 Stem packing
braided top/bottom rings
8 Gland Bush ASTM A276 Type 410
9 Gland Flange ASTM A105
ASTM A276 Type 410 /
10 Gland Stud / Nut
ASTM A194 Gr. 2H
11 Yoke Sleeve ASTM A582 Type 416
12 Identification Plate Aluminium (anodised)
13 Handwheel SG Iron / Steel
14 Handwheel Nut Steel

Class 1500 Standard Port (in inches)

Valve size SCREWED / SOCKET-WELD ENDS F L A N G E D E N D S

inch (mm) A B C D (min) E F G A B C D E F G

3/8 (10) 3.70 7.32 3/8 0.690 0.38 4.00 0.250 - - - - - - -

1/2 (15) 3.70 7.32 1/2 0.855 0.38 4.00 0.375 8.50 7.32 4.75 0.50 0.88 4.00 0.375

For weights, refer to L&T

3/4 (20) 3.70 7.32 3/4 1.065 0.50 4.00 0.500 9.00 7.32 5.12 0.75 1.00 4.00 0.500
1 (25) 4.40 7.50 1 1.330 0.50 5.50 0.625 10.00 7.50 5.88 1.00 1.12 5.50 0.625
11/4 (32) 5.12 10.92 11/4 1.675 0.50 7.25 1.102 11.00 10.92 6.25 1.25 1.12 7.25 1.102
11/2 (40) 5.12 10.92 11/2 1.915 0.50 7.25 1.102 12.00 10.92 7.00 1.50 1.25 7.25 1.102
2 (50) 7.82 19.10 2 2.406 0.62 14.00 1.500 14.50 19.10 8.50 2.00 1.50 14.00 1.500

Bellows-Sealed Gate and Globe Valves

Class 800 - Reduced Bore and Full Bore (for dimensions, refer to L&T)
Material Specification (Standard)
Sl. No. Part Description Specification
1 Body ASTM A105, in-situ stellited seat
2 Pipe (top/bottom) ASTM A105
3 Stem ASTM A479 Type 316
ASTM A351 Gr. CF8M,
4 Disc seat face stellited
ASTM A276 Type 316,
5 Seat Ring seat face stellited
Spiral-wound SS 316
6 Gasket with graphite filler
7 Bellows SS 316L
8 Cap Screw ASTM A193 Gr. B7
9 Guide ASTM A276 Type 316
10 Bonnet ASTM A105
11 Packing Graphite rings with braided end rings
12 Gland ASTM A276 Type 316
13 Gland Flange ASTM A105
14 Stud ASTM A276 Type 410
15 Nut ASTM A194 Gr. 2H
16 Yoke Sleeve ASTM A582 Type 416
17 Handwheel SG Iron / Mall. Iron
18 Plug (1/16 NPT) Carbon Steel
Note : Valves are available with screwed and socket-weld ends.
06 For dimensions, refer to L&T
Globe Valves Material Specification (Typical for Fig No. 58108)

L&T Straight-pattern Valves

Sl. No. Part Description Specification

1 Body ASTM A105, in-situ stellited seat

2 Bonnet ASTM A105
3 Stem ASTM A479 Type 410
4 Plug Disc ASTM A217 Gr. CA15
Graphite moulded rings with
5 Stem packing
braided top / bottom rings
Spiral-wound SS type 304
6 Gasket
with graphite filler
7 Cap Screws ASTM A193 Gr. B7
8 Gland Bush ASTM A276 Type 410
9 Gland Flange ASTM A105
ASTM A276 Type 410 /
10 Gland Stud / Nut
ASTM A194 Gr. 2H
11 Yoke Bush ASTM A582 Type 416
12 Identification Plate Aluminium (anodised)
13 Handwheel SG Iron / Steel
14 Handwheel Nut Steel

Screwed/Socket-weld ends (in inches, unless specified)

Class Valve size
C L
B
A S S
C
8 0 0 G L O B
F
E V A
G
L V E S
App. Wt. (kg)
A D (min) E
800 inch (mm) RB FB RB FB RB FB RB FB RB FB
1/4 (8) 3.20 5.8 - 1/4 - 0.555 0.38 3.25 - 0.25 - 1.7 -
3/8 (10) 3.20 5.8 5.8 3 /8 0.690 0.38 3.25 3.25 0.25 0.38 1.7 1.7
1/2 (15) 3.20 5.8 6.4 1 /2 0.855 0.38 3.25 4.00 0.38 0.50 1.7 2.4
3/4 (20) 4.00 6.4 7.7 3 /4 1.065 0.50 4.00 4.00 0.50 0.69 2.4 3.6
1 (25) 4.85 7.7 9.6 1 1.330 0.50 4.00 5.50 0.69 0.94 3.6 6.8
11/4 (32) 6.40 9.6 9.6 11/4 1.675 0.50 5.50 5.50 0.94 1.17 6.8 6.7
11/2 (40) 6.40 9.6 11.6 11/2 1.915 0.50 5.50 7.25 1.17 1.44 6.7 10.8
2 (50) 8.80 11.6 - 2 - 2.406 0.62 7.25 - 1.44 - 10.8 -

Flanged ends (in inches, unless specified)

Class 600 Valve size
A
C L A S S
B
6 0 0 G L O B E
øD
V A L V E S
øF App. Wt. (kg)
inch (mm) C E
RB FB RB FB RB FB RB FB RB FB
1/2 (15) 6.5 6.5 5.8 6.4 3.75 0.50 0.62 0.56 3.25 4.00 3.6 5.4
3/4 (20) 7.5 7.5 6.4 7.7 4.62 0.75 0.82 0.62 4.00 4.00 5.4 7.4
1 (25) 8.5 8.5 7.7 9.6 4.88 1.00 1.05 0.69 4.00 5.50 7.4 11.4
11/4 (32) 9.0 9.0 9.6 9.6 5.25 1.25 1.38 0.81 5.50 5.50 11.4 13.5
11/2 (40) 9.5 11.5* 9.6 11.6 6.12 1.50 1.61 0.88 5.50 7.25 13.5 19.1
* Greater than 2 (50) 11.5 - 11.6 - 6.50 2.00 - 1.00 7.25 - 19.1 -
ASME B16.10 / BS 2080
Flanged ends (in inches, unless specified)
Class Valve size
A
C L A S S
B
1 5 0 / 3 0 0
C
G L O B E V A L V E S
øF
inch (mm) øD E
150/300 RB FB RB FB Class 150 Class 300 RB FB
1/2 (15) 6.0 6.0 5.80 6.35 3.50 3.75 0.62 0.56 3.25 4.00
3/4 (20) 7.0 7.0 6.35 7.70 3.88 4.62 0.82 0.62 4.00 4.00
1 (25) 8.0 8.0 7.70 9.55 4.25 4.88 1.05 0.69 4.00 5.50
11/4 (32) 8.5 8.5 9.55 9.55 4.62 5.25 1.38 0.75 5.50 5.50
11/2 (40) 9.0 11.5* 9.55 11.60 5.00 6.12 1.61 0.81 5.50 7.25
* Greater than 2 (50) 10.5 - 11.60 - 6.00 6.50 2.07 0.88 7.25 -
ASME B16.10 / BS 2080 07
L&T Straight-pattern Valves Material Specification (Typical for Fig No. 88108)
Check Valves Sl. No. Part Description Specification

1 Body ASTM A105, in-situ stellited seat

2 Cover ASTM A105
3 Piston Disc ASTM A276 Type 410
4 Spring SS 302
Spiral-wound SS type 304
5 Gasket
with graphite filler
6 Cap Screws ASTM A193 Gr. B7
7 Identification Plate Aluminium (anodised)

Minimum differential pressure of 1 bar required for operating the valve.

Screwed/Socket-weld ends (in inches, unless specified)

C L A S S 8 0 0 C H E C K V A L V E S
Valve size
A B G App. Wt. (kg) Class
inch (mm) C D (min) E

1/4 (8)
RB FB RB FB
1/4
RB FB RB FB
800
3.20 - 2.1 - 0.555 0.38 0.25 - 1.1 -
3/8 (10) 3.20 3.20 2.1 2.1 3/8 0.690 0.38 0.25 0.38 1.1 1.1
1/2 (15) 3.20 4.00 2.1 2.3 1/2 0.855 0.38 0.38 0.50 1.1 1.5
3/4 (20) 4.00 4.85 2.3 2.6 3/4 1.065 0.50 0.50 0.69 1.5 2.4
1 (25) 4.85 6.40 2.6 3.5 1 1.330 0.50 0.69 0.94 2.4 4.4
11/4 (32) 6.40 6.40 3.5 3.5 11/4 1.675 0.50 0.94 1.17 4.4 4.4
11/2 (40) 6.40 8.80 3.5 4.1 11/2 1.915 0.50 1.17 1.44 4.3 6.8
2 (50) 8.80 - 4.1 - 2 2.406 0.62 1.44 - 6.8 -

Flanged ends (in inches, unless specified)

Valve size
A
C L A S S
B
6 0 0 C H E C K
øD
V A L V E S
App. Wt. (kg) Class 600
inch (mm) C E
RB FB RB FB RB FB RB FB
1/2 (15) 6.5 6.5 2.1 2.3 3.75 0.50 0.62 0.56 3.0 4.6
3/4 (20) 7.5 7.5 2.3 2.6 4.62 0.75 0.82 0.62 4.6 6.2
1 (25) 8.5 8.5 2.6 3.5 4.88 1.00 1.05 0.69 6.2 9.1
11/4 (32) 9.0 9.0 3.5 3.5 5.25 1.25 1.38 0.81 9.1 11.2
11/2 (40) 9.5 11.5* 3.5 4.1 6.12 1.50 1.61 0.88 11.2 15.2
2 (50) 11.5 - 4.1 - 6.50 2.00 - 1.00 15.2 - * Greater than
ASME B16.10 / BS 2080
Flanged ends (in inches, unless specified)
Valve size CL A SS
A
1 5 0 / 3 0 0
B
CH ECK
C
V ALV ES
Class
inch (mm) øD E
RB FB RB FB Class 150 Class 300 150/300
1/2 (15) 6.0 6.0 2.10 2.30 3.50 3.75 0.62 0.56
3/4 (20) 7.0 7.0 2.30 2.60 3.88 4.62 0.82 0.62
1 (25) 8.0 8.0 2.60 3.50 4.25 4.88 1.05 0.69
11/4 (32) 8.5 8.5 3.50 3.50 4.62 5.25 1.38 0.75
11/2 (40) 9.0 11.5* 3.50 4.10 5.00 6.12 1.61 0.81
* Greater than
2 (50) 10.5 - 4.10 - 6.00 6.50 2.07 0.88
08 ASME B16.10 / BS 2080
Cryogenic Gate Valves Material Specification (Standard)

L&T Straight-pattern Valves

Sl. No. Part Description Specification
1 Body ASTM A182 Gr. F304/F316
2 Cover Flange ASTM A182 Gr. F304/F316
3 Extension Column ASTM A312 Gr. TP304L/316L
4 Bonnet ASTM A182 Gr. F304/F316
5 Cap Screw ASTM A320 Gr. B8 Cl. 2
6 Stem ASTM A479 Gr. 304/316
ASTM A351 Gr. CF8/CF8M with
7 Wedge Disc suitable seating surface
Type 304/316 with
8 Body Seat Ring suitable seating surface
Spiral-wound SS type 304
9 Gasket with graphite filler
Graphite moulded rings with
10 Stem packing braided top/bottom rings
11 Gland Bush Type 304/316 SS
12 Gland Flange ASTM A182 Gr. F304/F316
ASTM A320 Gr. B8 Cl. 2/
13 Gland, Stud and Nut ASTM A194 Gr. 8
14 Yoke Sleeve Type 416 SS
Sintered Bronze/SS-backed PTFE/
15 Thrust Washer CS-backed PTFE
16 Identification Plate Aluminium (anodised)
17 Handwheel SG Iron / Steel
18 Handwheel Nut Steel

Cryogenic Globe Valves Material Specification (Standard)

Sl. No. Part Description Specification
ASTM A182 Gr. F304/F316,
1 Body
in-situ stellited seat
2 Cover Flange ASTM A182 Gr. F304/F316
3 Extension Column ASTM A312 Gr. TP304L/316L
4 Bonnet ASTM A182 Gr. F304/F316
5 Cap Screw ASTM A320 Gr. B8 Cl. 2
6 Stem ASTM A479 Gr. 304/316
ASTM A351 Gr. CF8/CF8M with
7 Plug Disc suitable seating surface
Spiral-wound SS type 304
8 Gasket with graphite filler
Graphite moulded rings with
9 Stem packing braided top/bottom rings
10 Gland Bush Type 304/316 SS
11 Gland Flange ASTM A182 Gr. F304/F316
ASTM A320 Gr. B8 Cl. 2/
12 Gland, Stud and Nut ASTM A194 Gr. 8
13 Yoke Bush Type 416 SS
14 Identification Plate Aluminium (anodised)
15 Handwheel SG Iron / Steel
16 Handwheel Nut Steel

Class 800 Screwed/Socket-weld ends (in inches, unless specified)

C L A S S 8 0 0 C R Y O G A T E / G L O B E V A L V E S
Valve size A B GATE GLOBE
inch (mm) GLOBE GATE GLOBE C D (min) E F G F G
GATE FB FB FB
RB RB RB RB FB RB FB RB FB RB FB
1/2 (15) 3.94 3.20 4.00 17.1 17.1 16.2 16.7 1/2 0.855 0.38 3.25 3.25 0.38 0.50 3.25 4.00 0.38 0.50
3/4 (20) 3.94 4.00 4.85 17.1 17.1 16.7 17.0 3/4 1.065 0.50 3.25 4.00 0.50 0.71 4.00 4.00 0.50 0.69
1 (25) 3.94 4.85 6.40 17.1 20.7 17.0 20.0 1 1.330 0.50 4.00 5.50 0.71 0.94 4.00 5.50 0.69 0.94
11/4 (32) 4.70 6.40 6.40 20.7 20.7 20.0 20.0 11/4 1.675 0.50 5.50 5.50 0.94 1.19 5.50 5.50 0.94 1.17
11/2 (40) 4.70 6.40 8.80 20.7 22.1 20.0 21.8 11/2 1.915 0.50 5.50 7.25 1.19 1.44 5.50 7.25 1.17 1.44
2 (50) 5.12 8.80 - 22.1 - 21.8 - 2 2.406 0.62 7.25 - 1.44 - 7.25 - 1.44 -
Cryogenic valves are also available in Class 150, 300, 600 and 1500, with dimensions generally as per
corresponding gate/globe valves in pages 5 - 7. For detailed dimensions, refer to L&T 09
L&T Y-pattern Valves Y-pat tern Globe/Check Valves
L&T Forged Steel Y-pat tern Globe and Check
Valves have established themselves in the industry
for their rugged and compact design, and reliable
service. These valves are of fered in Carbon Steel
and Alloy Steel. They are available in a range of sizes
starting from 1/4” to 2” (in reduced-bore design) and
from 3/8” to 11/2” (in full-bore design).

The rugged construction ensures an ideal body

and bonnet, suited to handle high pressure and
temperatures - up to 4250C in carbon steel and 5400C
in alloy steel.

The Y-pattern design ensures a near-perfect straight

flow which significantly reduces pressure drop
and turbulence when compared to conventional
designs.

As a standard, valves are supplied with screwed

body-bonnet joint, which ensures ease of inspection
and in-line maintenance, thus minimising downtime.

L&T Y-pattern valves can be of fered to NACE MR-0175

and other special NACE requirements. They can also be
supplied with IBR certification.

Y-pat tern Globe Valves

Disc and Seat
Gland Arrangement
The disc is provided with two integral rings to guide it throughout
The two-piece ball-type gland flange arrangement
its travel in the body. This minimises side thrust on the disc
ensures uniform loading on the packing even in
and eliminates bending of the stem even at high flow velocities.
case the gland is unevenly tightened.
Body and disc seats are hard-faced to ensure a long, trouble-
free life cycle.
Installation
Globe valves can be installed, either with the flow
Disc-Stem Connection
over or under the disc, depending on the service
The unique joint at the disc
condition. However, in the case of steam and
and the stem provides for a
other such hot services that include drain lines,
flexible yet strong connection
globe valves ought to be installed with flow over
that enables the disc to freely
the disc to avert unseating caused as an ef fect
float on the stem. This results
of dif ferential thermal expansion that would
in per fect alignment of the
otherwise result in leakage and consequent wire
disc with the stem.
drawing.
End Connection
Socket-weld ends to ASME B16.11
Body-Bonnet Joint But t-weld ends to BS 5352 Annexure D
The bonnet is screwed to the body with ACME threads to ensure Screwed ends (NPT) to ASME B1.20.1
ease of dismantling and resistance to galling. A graphite gasket
is provided for tight sealing. This joint is tack-welded to prevent Bore Diameter
loosening while in service. The bonnet can be easily removed Both Class 1500 and Class 2500 valves have bore
for inspection and maintenance of inner parts. The joint can diameters conforming to Class 1500-Standard
also be seal-welded on request. Bore of BS 5352, with the exception of 15mm
Class 2500 valve which has a bore diameter of
Packing 14.5mm.
Die-moulded graphite rings are used as packing to provide for
optimal performance at high pressures and temperatures. Two
filament rings provided at the top and bot tom of the graphite
packing rings act as anti-ex trusion rings. Moreover, a smooth
surface finish on the stuf fing box along with a precision-machined Y-pat tern Check Valves
stem ensure optimum sealing and packing life. Y-pat tern Check Valves incorporate the same
design and construction features as their globe
Stem valve counterpar ts. The spring-loaded disc
The stem is ACME-threaded and is ground for smo oth minimises chat tering and enables the valve
operation. to be installed either in a horizontal or ver tical
position.

10
Y-pat tern Globe Valves

L&T Y-pattern Valves

Material Specification
Sl. No. Part Description Specification
Carbon Steel Alloy Steel
1&2 Body & Bonnet ASTM A105, ASTM A182 Gr.F22,
in-situ stellited seat in-situ stellited seat
3 Yoke Bush ASTM A439 Type D2
4 Disc Type 410 SS, in-situ stellited seat
5 Stem Type 410 SS
6 Stem packing Graphite with braided end rings
7 Handwheel SG Iron
8 Gland Type 410 SS
9 Gland Flange BS 970 : 709M40 COND R
10 Handwheel Nut Steel
11 Gland Stud ASTM A193 Gr. B7
12 Gland Stud Nut ASTM A194 Gr. 2H
13 Gasket Graphite

Dimensional details (in mm, unless specified)

Class 1500 Class 2500
Valve
Size App.Wt. App.Wt.
A B C D E F (kg) A B C D E F (kg)
21.72 21.72
15 97.5 220 9.7 128 1/2”-14NPT 6 115 245 9.7 135 1/2”-14NPT 7
22.23 22.23
27.05 27.05
20 115 245 12.7 135 3/4”-14NPT 7 115 245 12.7 135 3/4”-14NPT 7
27.56 27.56
33.78 33.78
25 138 295 12.7 165 1”-11.1/2NPT 10 138 295 12.7 165 1”-11.1/2NPT 10
34.29 34.29
48.64 48.64
40 185 392 12.7 238 11/2”-11.1/2NPT 19 202 415 12.7 255 11/2”-11.1/2NPT 25
49.15 49.15
61.11 61.11
50 185 392 16.0 238 2”-11.1/2NPT 19 202 415 16.0 255 2”-11.1/2NPT 25
61.62 61.62
Note : 40mm valves can be of fered with butt-weld and socket-weld ends to suit 32mm pipe. 50mm valves can be of fered with butt-
weld ends to suit 65mm pipe. Class 900 valves available on request.

Y-pat tern Check Valves

Material Specification
Sl. No. Part Description Specification

1 Body & Bonnet Carbon Steel Alloy Steel

ASTM A105, ASTM A182 Gr.F22,
in-situ stellited seat in-situ stellited seat
2 Cap ASTM A105 or ASTM A182
IS 1875 Cl. 2 Gr. F22
3 Disc Type 410 SS, in-situ stellited seat
4 Spring Nimonic 90 / Inconel X 750
5 Gasket Graphite

Dimensional details (in mm, unless specified)

Class 1500 Class 2500
Valve
Size App.Wt. App.Wt.
A B C D E (kg) A B C D E (kg)
21.72 21.72
15 97.5 71 9.7 1/2”-14NPT 2 115 85 9.7 1/2”-14NPT 2.5
22.23 22.23
27.05 27.05
20 115 85 12.7 3/4”-14NPT 2.5 115 85 12.7 3/4”-14NPT 2.5
27.56 27.56
33.78 33.78
25 138 95 12.7 1”-11.1/2NPT 5 138 95 12.7 1”-11.1/2NPT 5
34.29 34.29
48.64 48.64
40 185 120 12.7 11/2”-11.1/2NPT 9 202 135 12.7 11/2”-11.1/2NPT 9
49.15 49.15
61.11 61.11
50 185 120 16.0 2”-11.1/2NPT 9 202 135 16.0 2”-11.1/2NPT 9
61.62 61.62
End dimensions of 50mm valves can be machined to suit 65mm pipe. For details, refer to L&T
Class 900 valves available on request. For dimensions, refer to L&T 11
L&T Valves Limited
Mount - Poonamallee Road, Manapakkam, Chennai 600 089, INDIA.
Tel. : + 91 44 22498201 Fax: +91 44 22492794
[email protected] www.Lntvalves.com

Publication Number: VC006-2/0715

As we continuously endeavour to improve our products, the data given herein is subject to change. Please refer www.Lntvalves.com for the latest catalogue.