Scribd
Upload
67 views3 pages

EEE (ELT-112 & - 110) /EEE (ECT-110) (For BE-CE, PE, CHEM, BIO-TECH, CSE, ECE)

The document contains 25 questions related to electrical circuits and components. The questions cover a range of topics including resistance of wires, power calculations for circuits, inductors, capacitors, resistors, transformers, and Kirchhoff's laws. Sample questions include calculating the resistance of a wire stretched to double its length, determining the power consumed by two light bulbs in series, and finding the current through an inductor given the applied voltage.

Uploaded by

Santosh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
67 views3 pages

EEE (ELT-112 & - 110) /EEE (ECT-110) (For BE-CE, PE, CHEM, BIO-TECH, CSE, ECE)

The document contains 25 questions related to electrical circuits and components. The questions cover a range of topics including resistance of wires, power calculations for circuits, inductors, capacitors, resistors, transformers, and Kirchhoff's laws. Sample questions include calculating the resistance of a wire stretched to double its length, determining the power consumed by two light bulbs in series, and finding the current through an inductor given the applied voltage.

Uploaded by

Santosh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

BEEE(ELT-112 & -110) /EEE (ECT-110)

(for BE-CE,PE,CHEM,BIO-TECH,CSE,ECE)

 Q1) Resistance of a wire is ‘r’ ohms. The wire is stretched to double its length,
and then its resistance in ohms is ____?
Q2) Two bulbs rated 100 W, 220 V and 200 W, 220 V are joined in series to 220
V supply. Determine the power consumed in circuit.
Q3 ) Find the power delivered to an element at t=3ms if the current entering its
positive terminal is i=10cos50πt A and the voltage is v=6di/dt.
Q4) Calculate the maximum current that a 4W, 50KΩ resistor can safely conduct .

 Q5) Draw an electrical circuit and in it label for all possible nodes, branches and
loops.
  Q6) An electric heater draws 9A from a 220 V line. Determine the resistance of
the heater .
Q7) Two resistances of equal values when placed in parallel gives an effective
resistance equal to R. Analyse the possible value of the effective resistance if the
two resistances are connecting in series?
 Q8) If the current through a 3 mH inductor is i(t)=80 cos150t mA , find the
terminal voltage and the energy stored.
Q9) Find the amplitude , phase, period and frequency of the sinusoid
v(t)=15cos(60t +300)
Q 10) Analyse the below circuit for obtaining the current in each branch of the
circuit shown in Fig.1

Fig.1
Q 11) A voltage source of 50 V is connected across a 10 KΩ resistor. Find the
current, the conductance and the power.
Q 12) Evaluate the voltage drop across a 3.0 KW toaster that draws 15 A of
current .
Q 13) In the network given in Fig.2, determine current i .
Fig. 2

Q 14) If the voltage v=25 sin(150t + 20 0) is applied to an inductor of 50mH ,


analyse the circuit to find current through the inductor.
 Q 15 ) Design an electrical circuit so that 50V voltage source supplies a current of
15 Amperes. You can use series or parallel connected resistors of any value.
Q 16) Using Kirchhoff’s laws find the current through branch AB as shown in
Fig. 4.

Fig. 4

Q 17 )Judge the location of V-I characteristics of a variable resistor and draw


these on V-I plane when the value of resistance has been fixed at 10 ohms, 15
ohms and 20 ohms.
Q 18) Find the effective resistance between L & M of the circuit shown in Fig.
5.

Fig. 5
Q 19) You have to make an inductance of high value. How will you proceed?

Q 20) A balanced delta connected load takes 20 KVA at 0.8 power factor when
connected to a 415 V, 3-Φ system. Calculate the resistance of each branch of a
balanced star connected non-reactive load which when connected to the same
supply coil takes the same power?
Q 21) Three inductive coils each with a resistance of 25 Ω and an inductive
reactance of 0.15 Ω are connected in star across 400 V, 3 – φ, 50 Hz supply.
Calculate:
1. Phase current
2.Line current and
3.Total power absorbed.
Q 22) A series RLC circuit has R=50 Ω , X C=30 Ω and XL=60 Ω .Calculate the
impedance and the power factor of the circuit.
Q 23) For an ideal transformer if N2/N1 =10 , the ratio of I2/I1 is _____________
and the ratio of V2/V1 is __________________
Q 24) A series RC circuit has │Vr│=15 V and │Vc│= 10 V. Evaluate the
magnitude of the applied voltage.
Q 25) Two coils connected in series–aiding fashion have a total inductance of
600mH. When connected in a series-opposing configuration, the coils have a total
inductance of 400mH. If the inductance of one coil is three times the other , Find
L1,L2 ,M and the value of coupling coefficient.

You might also like