Scribd
Upload
62 views1 page

Flexible Discharge Hose DN20, Included Check Valve: SNS IG-100 Fire Suppression System

Uploaded by

Nguyễn Minh Thiệu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views1 page

Flexible Discharge Hose DN20, Included Check Valve: SNS IG-100 Fire Suppression System

Uploaded by

Nguyễn Minh Thiệu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SNS IG-100 Fire Suppression System

System Component Datasheet

DT-SNS-FC20E Rev 1.1


Flexible discharge hose DN20, Effective: July 2019
included check valve
P/N SNS-FC20

FEATURES
 Check valve integrated  Easy for installation
 Provide with welded adaptor

DESCRIPTION
Flexible discharge hose is used to connect the 84L IG-100
cylinders to discharge piping or cylinders manifold. The
hose has a thread fitting at both ends.

The flexible discharge hose DN20 has welded with check


valve. Check valve is mandatory requirement as item
6.2.4.4 TCVN 7161-1 when two or more cylinders are
connected to the same manifold. Check valves shall
prevent extinguishant loss from the manifold if the system
is operated when any containers are removed for
maintenance.
INSTALLATION
The flexible discharge hose connects directly to cylinder
valve, the other end has check valve provide with welded
adaptor for welding to cylinder manifold.

SPECIFICATION

Working pressure 80 bar


Hydrostatic test
250 bar
pressure
Leak test pressure 158 bar

Hose material Nitrile Butadiene Rubber

Fitting material SM20C

Cylinder connection ¾” 14PF


Pipe/manifold PT ¾” (Welded adaptor will
connection be provided included)
ORDERING INFORMATION
The part number for ordering the flexible discharge hose
DN20 is SNS-FC20.

DIMENSIONS

The SNS IG-100 system are designed and manufactured under


license from S-TEC SYSTEM (Trademark AnyFire(IG-100)TM).
Address 82, Sangdeok-ro, Jiksan-eup, Seobuk-Gu, Chaonan-si,
Chungnam 31038, KOREA. The calculation software use
AnyFire(IG-100)TM logo.
This literature is provided for informational purposes only. S-TECVINA
Ltd., assumes no responsibility for the product’s suitability for a particular
application. The product must be properly applied to work correctly. If
you need more information on this product, or if you have a particular S-TECVINA Ltd.,
problem or question, contact S-TECVINA Ltd.,
Dong Van IV IZ, Ha Nam, Vietnam
Phone: (+084) 0226 2460 114
© 2019 S-TECVINA Ltd.,    www.stecvina.com 

You might also like