8-Port Antenna R1 R2 B1 B2

Frequency Range 790–960 790–960 1710–2180 1710–2180

Dual Polarization X X X X
HPBW 65° 65° 60° 60°
Adjust. Electr. DT 0°–10° 0°–10° 0°–6° 0°–6°
set by hand or by optional RCU (Remote Control Unit)

8-Port Antenna 790–960/790–960/1710–2180/1710–2180 65°/65°/60°/60° 16/16/18.5/18.5dBi

0°–10°/0°–10°/0°–6°/0°–6°T
Type No. 80010825
Left side, lowband R1, connector 1– 2
790 – 960
Frequency Range MHz 790 – 862 824 – 894 880 – 960
Gain at mid Tilt dBi 15.7 16.0 16.1
Gain over all Tilts dBi 15.6 ± 0.4 15.8 ± 0.4 15.9 ± 0.4
Horizontal Pattern:
Azimuth Beamwidth ° 66 ± 2.2 64 ± 2.3 62 ± 3.1
Front-to-Back Ratio, dB > 27 > 28 > 27
Total Power, ± 30°
Cross Polar Discrimination dB > 24 > 24 > 22
at Boresight
Cross Polar Discrimination dB > 11.5 > 10.5 > 10.0
over Sector
Vertical Pattern:
Elevation Beamwidth ° 11.2 ± 0.6 10.7 ± 0.7 10.0 ± 0.7
Electrical Downtilt ° 0.0 – 10.0
continuously adjustable
Tilt Accuracy ° < 0.2 < 0.3 < 0.4
First Upper Side Lobe dB > 19 > 19 > 15
­Suppression
Cross Polar Isolation dB > 30
Port to Port Isolation dB > 30 (R1 // R2, B1, B2)
Max. Effective Power W 400 (at 50 °C ambient temperature)
per Port
Max. Effective Power W 800 (at 50 °C ambient temperature)
Port 1–2
Values based on NGMN-P-BASTA (version 9.6) requirements.
936.4864/c ngmn 04.19.02.04 Subject to alteration.

All specifications are subject to change without notice.

The latest specifications are available at www.kathreinusa.com 80010825 Page 1 of 5
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]
8-Port Antenna

Right side, lowband R2, connector 3 – 4

790 – 960
Frequency Range MHz 790 – 862 824 – 894 880 – 960
Gain at mid Tilt dBi 15.7 15.9 16.1
Gain over all Tilts dBi 15.5 ± 0.4 15.7 ± 0.3 15.9 ± 0.4
Horizontal Pattern:
Azimuth Beamwidth ° 66 ± 2.1 65 ± 1.6 62 ± 3.0
Front-to-Back Ratio, dB > 26 > 27 > 27
Total Power, ± 30°
Cross Polar Discrimination dB > 28 > 26 > 25
at Boresight
Cross Polar Discrimination dB > 11.5 > 11.5 > 10.0
over Sector
Vertical Pattern:
Elevation Beamwidth ° 11.3 ± 0.6 10.8 ± 0.7 10.0 ± 0.7
Electrical Downtilt ° 0.0 – 10.0
continuously adjustable
Tilt Accuracy ° < 0.3 < 0.2 < 0.4
First Upper Side Lobe
­Suppression dB > 18 > 20 > 15

Cross Polar Isolation dB > 30

Port to Port Isolation dB > 30 (R2 // R1, B1, B2)
Max. Effective Power W 400 (at 50 °C ambient temperature)
per Port
Max. Effective Power W 800 (at 50 °C ambient temperature)
Port 3–4
Values based on NGMN-P-BASTA (version 9.6) requirements.

936.4864/c ngmn 04.19.02.04 Subject to alteration.

All specifications are subject to change without notice.

Page 2 of 5 80010825 The latest specifications are available at www.kathreinusa.com
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]
 8-Port Antenna

Left side, highband B1, connector 5 – 6

1710 – 2180
Frequency Range MHz 1710 – 1880 1850 – 1990 1920 – 2180
Gain at mid Tilt dBi 18.6 18.8 18.6
Gain over all Tilts dBi 18.5 ± 0.3 18.7 ± 0.3 18.5 ± 0.5
Horizontal Pattern:
Azimuth Beamwidth ° 59 ± 2.4 57 ± 1.9 60 ± 5.4
Front-to-Back Ratio, dB > 27 > 26 > 26
Total Power, ± 30°
Cross Polar Discrimination dB > 27 > 27 > 25
at Boresight
Cross Polar Discrimination dB > 14.5 > 16.5 > 11.0
over Sector
Vertical Pattern:
Elevation Beamwidth ° 4.9 ± 0.2 4.7 ± 0.2 4.5 ± 0.3
Electrical Downtilt ° 0.0 – 6.0
continuously adjustable
Tilt Accuracy ° < 0.3 < 0.2 < 0.3
First Upper Side Lobe
­Suppression dB > 12 > 17 > 19

Cross Polar Isolation dB > 30

Port to Port Isolation dB > 30 (B1 // R1, R2, B2)
Max. Effective Power W 250 (at 50 °C ambient temperature)
per Port
Max. Effective Power W 500 (at 50 °C ambient temperature)
Port 5–6
Values based on NGMN-P-BASTA (version 9.6) requirements.

Right side, highband B2, connector 7– 8

1710 – 2180
Frequency Range MHz 1710 – 1880 1850 – 1990 1920 – 2180
Gain at mid Tilt dBi 18.5 18.8 18.8
Gain over all Tilts dBi 18.4 ± 0.4 18.7 ± 0.3 18.6 ± 0.5
Horizontal Pattern:
Azimuth Beamwidth ° 60 ± 2.9 57 ± 2.2 59 ± 4.7
Front-to-Back Ratio, dB > 27 > 26 > 26
Total Power, ± 30°
Cross Polar Discrimination dB > 25 > 27 > 26
936.4864/c ngmn 04.19.02.04 Subject to alteration.

at Boresight
Cross Polar Discrimination dB > 15.5 > 15.5 > 10.5
over Sector
Vertical Pattern:
Elevation Beamwidth ° 5.0 ± 0.2 4.7 ± 0.2 4.5 ± 0.3
Electrical Downtilt ° 0.0 – 6.0
continuously adjustable
Tilt Accuracy ° < 0.2 < 0.3 < 0.3
First Upper Side Lobe dB > 12 > 17 > 18
­Suppression
Cross Polar Isolation dB > 30
Port to Port Isolation dB > 30 (B2 // R1, R2, B1)
Max. Effective Power W 250 (at 50 °C ambient temperature)
per Port
Max. Effective Power W 500 (at 50 °C ambient temperature)
Port 7–8
Values based on NGMN-P-BASTA (version 9.6) requirements.

All specifications are subject to change without notice.

The latest specifications are available at www.kathreinusa.com 80010825 Page 3 of 5

Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]
8-Port Antenna

Electrical specifications, all systems Mechanical specifications

Impedance Ω 50 Input 8 x 7-16 female
VSWR < 1.5 Connector Position bottom
Return Loss dB > 14 Adjustment Mechanism 4x, Position bottom
Interband Isolation dB > 30 ­continuously adjustable
Passive Intermodulation dBc < –150 (2 x 43 dBm carrier) Wind load (at Rated N | lbf Frontal: 1230 | 277
Polarization ° –45, +45 Wind Speed: 150 km/h) Maximal: 1355 | 305
Max. Effective Power 1200 (at 50 °C ambient Max. Wind Velocity km/h 200
W ­temperature) mph 124
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements. Height / Width / Depth mm 1934 / 576 / 133
inches 76.1 / 22.7 / 5.2
Category of H (Heavy)
Mounting ­Hardware
Weight kg 32.0 / 34.2 (clamps incl.)
lb 70.5 / 75.3 (clamps incl.)
Packing Size mm 2202 / 634 / 159
inches 86.7 / 25.0 / 6.3
Scope of Supply Panel and 2 units of clamps
for 42 – 115 mm |
1.7– 4.5 inches diameter

Accessories (order separately if required) 1) 2) 1) ∅ 9 | 0.4

2) 72 | 2.8
Remarks Weight approx. Units per
Type No. Description
mm | inches kg | lb antenna

85010002 1 clamp Mast diameter: 110 – 220 | 4.3 – 8.7 2.7 | 6.0 2
85010003 1 clamp Mast diameter: 210 – 380 | 8.3 – 15.0 4.8 | 10.6 2
85010008 1 downtilt kit Downtilt angle: 0° – 11° 6.5 | 14.3 1
Accessories (included in the scope of supply)
738546 1 clamp Mast diameter:   42 – 115 | 1.7 – 4.5 1.1 | 2.4 2
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
936.4864/c ngmn 04.19.02.04 Subject to alteration.
Wall mounting with two half clamps 738546 (included in the scope of supply).
1934 | 76.1
1966 | 77.4
2006 | 79.0

Material: Reflector screen: Weather-proof aluminum.

Fiberglass radome: The grey fiberglass radomes of these ­antennas
are very stable and e­ xtraordinarily stiff. They are resistant to ultraviolet
­radiation and can also be painted to match their surroundings.
All screws and nuts: Stainless steel

Grounding: The metal parts of the antenna including the mounting and the inner
­conductors are DC grounded.

Adjustment mechanism
with integrated scale

All dimensions in mm | inches

All specifications are subject to change without notice.

Page 4 of 5 80010825 The latest specifications are available at www.kathreinusa.com
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]
 8-Port Antenna

Layout of interface:

790-960 -2180 Til ilt

790-96 1710-218
10

0
T

0
Tilt

t
17

99 | 3.9
110 | 4.3
Tilt

133 | 5.2 *
4)
56 | 2.2

34 | 1.3
1) 2)

270 | 10.6 3)
1) 33.5 | 1.3
476 | 18.7 2) 35.5 | 1.4
3) 50 | 2.0
576 | 22.7 * 4) 45 | 1.8
Bottom view
* Dimensions refer to radome
All dimensions in mm | inches

Correlation Table
Frequency range Array Connector
936.4864/c ngmn 04.19.02.04 Subject to alteration.

790 – 960 MHz R1 1–2

790 – 960 MHz R2 3–4
1710 – 2180 MHz B1 5–6
1710 – 2180 MHz B2 7–8

B1 B2
R1 R2
Left Right

Any previous data sheet issues have now become ­invalid.

All specifications are subject to change without notice.

The latest specifications are available at www.kathreinusa.com 80010825 Page 5 of 5
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]
 Mounting Hardware
Clamp Included in the Scope of Supply

Suitable for mast diameter (mm) 42 – 115

[inches] [1.65 – 4.53]
Antenna – mast distance (mm) 20 – 25
[inches] [0.79 – 0.98]
Material of clamp and screws Hot-dip galvanized steel / stainless steel
Weight (kg) 1.1
[lb] [2.43]

152 [5.98]

100 [3.94]

[0.79–0.98]
40 [1.57]
72 [2.83]

20–25
40 [1.57]

15
2–1
’ 4 4.53]
5–
[1.6

M10 ‰MA = 25 Nm

M8 ‰MA = 20 Nm
35 [1.38]
64 [2.52]
125 [4.92]

20–25
[0.79–0.98]
Subject to alteration.
936.3920/c

Please note: Kathrein does not recommend to use counter nuts. All dimensions in mm and [inches]
The additional nuts supplied are only meant as spares.

All specifications are subject to change without notice.

The latest specifications are available at www.kathreinusa.com 738546 Page 1 of 1
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]
 General Instructions
for Adjustment Mechanism

Description of the adjustment mechanism (protective cap removed):

1
2

2
➀ Twist protection. ➀ Thread for fixing the protective To set the downtilt angle exactly,
➁ Downtilt spindle with integrated cap or the RCU (Remote Control you must look horizontally at the
scale. Unit). scale. The lower edge of the gear-
➁ Gearwheel for RCU power drive. wheel must be used for alignment.

Manual adjustment procedure:

0° – max.°

0° – max.°

Remove the protective cap and the Set downtilt angle by rotating the Screw on the twist protection and
twist protection completely. gearwheel. the protective cap again.

Optional: RCU (Remote Control Unit) for remote-controlled downtilt adjustment:

Subject to alteration.
936.4037/a

For a description of RCU installation please refer to the respective data sheet.
All specifications are subject to change without notice.
The latest specifications are available at www.kathreinusa.com Page 1 of 2
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]
General Instructions
for Feederline and RCU Installation
for Antennas
Please note: In order not to damage the interfaces, please make sure that only the right tools are used.
Tighten the feederline connector interfaces solely by using a common torque-wrench with a suitable wrench
width.

Description of bottom end cap (exemplary picture):

Adjustment mechanism
(protective cap removed) Ventilation hole

Spindle with tilting scale

Colour coding:
Correlation of each RF input to:
– the corresponding adjustment mechanism
7-16 female (long neck) – the frequency range
– the polarization

Installation of the feederline connector and RCU (optional):

In order to protect the adjustment mechanism, the protective caps have to be attached during
feederline installation!
Kathrein installation set: Type No. 85010077
Set has to be ordered separately!
Set consists of three spanners of divers width
27, 32 and 41 mm | 1.1, 1.3 and 1.6 inches
1/2˝ square actuation
according to
DIN 3120 Form C

32 | 1.3
Subject to alteration.

Carefully place the connector and After feederline installation, the

fix the nut using a torque-wrench optional remote control units
(according to the manufacturers (RCUs) can be mounted. .6
|1
27

guidelines). 41
| 1.
1

All dimensions in mm | inches

936.4037/a

These tools are suitable for 7-16 connectors with a wrench size of
27 or 32 mm | 1.1 or 1.3 inches, and the RCU attachment nut with a
wrench size of 41 mm | 1.6 inches.
Tighten nuts within a torque range of 25 – 33 Nm depending on
connector manufacturers’ specifications, respectively the RCU nut
with a torque range of 15 – 18 Nm.

All specifications are subject to change without notice.

Page 2 of 2 The latest specifications are available at www.kathreinusa.com
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]