FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT

08744886600 WE WORK WITH THE STUDENT!!!!!!!

Q1.If ( 3/2 +i√3/2)48=324(x+iy) then ordered pair b) 5/3

(x,y) is c) 5/4
d) None of these
a) (0,2)
b) (0,1) Q7. Limx=1 x2-√x/√x-1=
c) (1,0)
a) 0
d) (1,1)
b) ½
Q2. The number of terms in the expansion of c) 2
[1+3x+3x2+x3]6 is d) 3

a) 8 Q8. Re(z-8i/z+6) =0 , then z lies on the curve

b) 9
a) x2+y26x-8y=0
c) 19
b) 4x-3y+24=0
d) 24
c) x2+y2-8=0
Q3. ∫x51(tan-1x+cot-1x)dx d) none of these

a) x2/52 (tan-1x+cot-1x)+C Q9. The value of a if the curves x2/a2 +y2/4 =1

b) x2/52 (tan-1x-cot-1x)+C and y3=16x cuts orthogonally
c) ∏x2/104 +∏/2 +C
a) ±1/2
d) x2/52 +∏/2+C
b) ±2/√3
Q4. A bag contain a black 7 white and 4 gren c) ±√3/4
balls . If three balls are drawn randomly then d) ±√3
the probability of getting 3 balls of different Q10. If the coefficent of x7 in (ax2+1/bx)11 is
colour equal to the cofficent of x-7 in (ax-1/bx2)11, then
a) 7/95 ab =
b) 14/95
a) 1
c) 21/95
b) ½
d) 7/228
c) 2
Q5. Y=√sinx+√sinx+√sinx+………………∞ then d) 3
dy/dx is Q11. The value of limx=∏/2 x
∏/2∫ t dt/ sin(2x-∏)
is

a) 2y-1/cosx a) ∞
b) Cosx/2y-1 b) ∏/2
c) 2x-1/cosy c) ∏/4
d) Cosy/2y-1 d) ∏/8

Q6. The area between the curves y=x3 and y=√x Q12. If 2sinx-cos2x=1, then cos2+cos4x is equal
is to

a) 5/12 a) 1
b) -1
GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC
Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT
08744886600 WE WORK WITH THE STUDENT!!!!!!!

c) -√5 d) 485
d) √5
Q17. If A= 1 1 then A100 is equal to
Q13. IF A = 5 -6
1 1
1 -1

Then determinant of A1003-5A1002 is

a) 100A
a) 1 b) 299A
b) 2 c) 2100A
c) 4 d) 99A
d) 6 Q18.IF y=1/1+x+x2 then dy/dx is

a) Y2(1+2x)
Q14. Let a = 1 2 and b= a b b) –(1+2x)/y2
c) –y2(1+2x)
3 4 c d d) (1+2x)/y2

Are two matrices such that AB=BA and c=0, Q19. Five dice are tossed what is the probability
then the value of a-d/3b-c is that five number shown will be different

a) 0 a) 5/54
b) 2 b) 5/18
c) -2 c) 5/27
d) -1 d) 5/81

Q15. If cos Ѳ = a cos ф+b/a+bcosф then tanѲ/2 Q20. If P= 2 -2 -4

is equal to
-1 3 4
a) √(a-b)/(a+b) tanф/2
1 -2 -3
b) √(a+b)/(a-b) cosф/2
c) √(a-b)/(a+b) sinф/2 Then P5 equals
d) None of these
a) P
Q16. A man has seven relatives 4 of them are
b) 2P
ladies and 3 gentlemen his wife has 7
c) –P
relatatives out which 3 are ladies and 4 d) -2P
gentlemen. The number of ways in which they
can invite a dinner party of 3 ladies and 3 Q21. If m and n denotes espectively the order
genltemen so that there are 3 of man’s relative and degree of a differential equation
and 3 of wife’s relative are
[a+(dy/dx)6]7/5 = b d2y/dx2 then the value of
a) 144 (m,n) will be
b) 340
a) (1,7)
c) 484
b) (1,6)
GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC
Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT
08744886600 WE WORK WITH THE STUDENT!!!!!!!

c) (2,5) d) 14∏
d) (2,6)
Q28. Find the equation of the set of points
Q22. tanѲ+secѲ-1 /tanѲ-secѲ+1 = equidistant from (-1,-1) and (4,2)

a) 1-sinѲ/cosѲ a) 5x+3y-9=0
b) 1+sinѲ/cosѲ b) 5x-3y+9=0
c) cosѲ/1+sinѲ c) 2x-5y+3=0
d) none of these d) 2x+5y-3=0
Q23. 0∫∞ (√x2+1 +x)-3 dx\ Q29. The equation 2x-3/x-2 =4- 3/x-2 has

a) 1/8 a) No root
b) 2/8 b) One root
c) 3/8 c) Two equal root
d) 4/8 d) None of these
Q24. Which term of the series 7+11+15+…….. is Q30.if f(x) =1/x2∫x2 cos√t dt then f’(1) is equal to
403
a) Cos 1
a) 95 b) 2 cos 1
b) 100 c) 4 cos 1
c) 105 d) None of these
d) 120
Q31. The inflection point on the graph of the
2 2 2
Q25. The number of real roots of (x +2) +8x = function
6x(x2+2) is
Y=0∫x(t-10(t-2)2 dt are
a) 0
b) 2 a) X=-1
c) 4 b) X=3/2
d) None c) X=4/3
d) X=1
Q26. The simplest value of
Q32. The vectors a =i^+y^+mk , b=i^+y^
2/√2+√2+√2+cos4x +(m+1)k^

a) Sec x/2 c=i^-y^ +mk^ are coplaner if m is equal to

b) Sec x
c) Cosec x a) 1
d) 1 b) 4
c) 3
Q27. Find the area of the circle whose centre is d) None of these
(-3,2) and (2,5) is a point on the circle
Q33. IF a and b are row unit vectors such that
a) 24∏ (a+2b) and (5a-4b) are perpendicular to each
b) 34∏ other then the angle between a and b is
c) 44∏
GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC
Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT
08744886600 WE WORK WITH THE STUDENT!!!!!!!

a) 450 39. One watt is equal to

b) 600 (a) 0.1 J/s (b) 1 J/s (c) 10 J/s (d) 100 J/s
c) Cos-1(1/√3) 40. Two forces of 100 N and 150 N are acting
d) Cos-1(2/7) simultaneously at a point. What isthe
Q34. For what value of x, the line joining (-5,7) resultant of these two forces, if the angle
and (0,-2) is perpendicular to the line joining (1,- between them is 45°
3) and (4,x) (A) 100N
(B) 232N
a) 3/ (C) 250N
b) 4/3 (D) 332N
c) -4/3 41. Two forces act at an angle of 120°. The
d) -3/4 bigger force is of 40 N and theresultant is
Q35. The axis of the parabola x2+2xy+y2-5x+5y- perpendicular to the smaller one. Find the
5=0 is smaller force.
(A) 20N
a) X+y=0 (B) 40N
b) X+y-1=0 (C) 25N
c) X-y+1=0 (D) 15N
d) X-y=1/√2 42. A machine component 1.5 m long and
Q36. The line segement joining the foci of the weight 1000 N is supported by tworopes AB
hyperbola x2-y+1=0 is one of the diameters of and CD Calculate the tensions T1 and T2 in
the circle. The equation of the circle is the ropes AB and CD.
(A) 732N 518N
a) X2+y2=4 (B) 518N 732N
b) X2+y2=√2 (C) 800N 500N
c) X2+y2=2
(D) 500N 800N
d) X2+y2=2√2

Q37. The equation of the line passing through (-

3,5) and perpendicular to the through (1,0) and
(-4,1) is

a) 5x+y+10=0 43. If this force is applied at an angle of 60° to

b) 5x-y+20=0
the edge of the same door,find the moment
c) 5x-y-10=0
of this force.
d) 5x+y+20=0
(A) 15Nm
2017
Q38. 2016∫ √x/√x +√4033-x dx (B) 12Nm
(C) 10.4Nm
a) ¼
(D) 13.5Nm
b) 3/2
c) 2017/2
d) ½

GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC

Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT
08744886600 WE WORK WITH THE STUDENT!!!!!!!

44. A uniform plank ABC of weight 30 N and 2 (D) 10N 13N

m long is supported at one end Aand at a
point B 1.4 m from AFind the maximum
weight W, that can be placed at C, so that
the plank does not topple.
(A) 30N
(B) 25N
(C) 10N 48. The Lami’s Theorem is applicable only for
(D) 20N (a) Coplanar forces (b) Concurrent forces
(c) Coplanar and concurrent forces (d) Any
type of forces
49. Find the centre of gravity of a semicircular
section having outer and inner diameters of
45. Determine the tension developed in the 200 mm and 160 mm
spring, when a load of 100 N is applied at A (A) 67.5mm
(A) 30N (B) 57.5mm
(B) 24N (C) 47.5mm
(C) 33N (D) 37.4mm
(D) 28N

50. A right circular cone of 30 mm diameter and

60 mm height is cut from a cylinder of 50
mm diameter at 120 mm height Find the
46. A couple consists of position of the centre of gravity of the body
(a) two like parallel forces of same from its base.
magnitude. (A) 60mm
(b) two like parallel forces of different (B) 65mm
magnitudes. (C) 62.5mm
(c) two unlike parallel forces of same (D) 60.7mm
magnitude.
(d) two unlike parallel forces of
different magnitudes.
47. An electric light fixture weighting 15 N
hangs from a point C, by two stringsAC and
BC. The string AC is inclined at 60° to the 51. The centre of gravity of a right circular cone
horizontal and BC at 45° to the of diameter (d) and height (h) lies at a
horizontal(Assume Cos(75)=0.25 distance of ...... from the base measured
(A) 11N 7.7N along the vertical radius.
(B) 7.7N 11N
(C) 13N 10N

GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC

Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT
08744886600 WE WORK WITH THE STUDENT!!!!!!!

52. Find the moment of inertia of a rectangular

section 30 mm wide and 40 mmdeep about
X-X axis and Y-Y axis at CG.
(A) 160*10^3 mm490*10^3 mm4
(B) 150*10^3 mm490*10^3 mm4 57. The force of friction between two bodies in
(C) 160*10^3 mm4190*10^3 mm4 contact
(D) 150*10^3 mm4190*10^3 mm (a) Depends upon the area of their contact
53. Find the moment of inertia of the section (b) Depends upon the relative velocity
about the base BC. between them
(A) 15.6*106mm4 (c) Is always normal to the surface of their
(B) 12.8*106mm4 contact
(C) 14.9*106mm4 (d) All of the above
(D) 18.6*106mm4 58. A uniform ladder of length 3.25 m and
weighing 250 N is placed against asmooth
vertical wall with its lower end 1.25 m from
the wall. The coefficient of friction between
theladder and floor is 0.3. What is the
frictional force acting on the ladder at the
54. If the area of a section is in mm2 and the point of contact between the ladder andthe
distance of the centre of area from a lines is floor?
in mm, then units of the moment of inertia (A) 52N
of the section about the line is expressed in (B) 55N
(a) mm2 (b) mm3 (c) mm4 (d) mm5 (C) 62N
55. The moment of inertia of a triangular (D) 65N
section of base (b) and height (h) about an
axis passing through its vertex and parallel
to the base is ... as that passing through its
C.G. and parallel to the base.
(a) twelve times (b) nine times
(c) six times (d) four times
56. A body of weight 300 N is lying on a rough 59. A certain weight lifting machine of velocity
horizontal plane having a coefficientof ratio 30 can lift a load of 1500N with the
friction as 0.3. Find the magnitude of the help of 125 N effort. Determine if the
force, which can move the body, while machine is reversible.
acting at an angleof 25’ with the horizontal. (A) Yes
Take Cos(25)= 0.9 (B) No
(A) 100N (C) Cannot be determined
(B) 90N 60. A load of 120 N is raised by means of a
(C) 85N certain weight lifting machine through a
(D) 87N distance of 200 mm. If the effort applied is

GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC

Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT
08744886600 WE WORK WITH THE STUDENT!!!!!!!

20 N and has moved through a distance of

1.5 m, find the efficiency of the machine.
(A) 40%
(B) 60%
(C) 80% (A) 6KN 6KN
(D) 100% (B) 4.4KN 7.6KN
61. The efficiency of a lifting machine is the (C) 7.6 KN 4.4KN
ratio of (D) 10KN 3KN
(a) Its output to input
(b) Work done by it to the work done on it 67. Find reactions at C.
(c) Its mechanical advantage to its velocity
ratio
(d) All of the above.
62. The maximum mechanical advantage of a
lifting machine is
(a) 1 + m(b) 1 – m (c) 1/ m (d) m (A) 20KN
63. In a system of pulleys of the first type, there
(B) 10KN
are three pulleys, and a weightof 320 N can
(C) 9KN
be lifted by an effort of 50 N.Find the (D) 8KN
efficiency of the machine 68. find the force P, which can hold the weight
(A) 40% 5KN in equilibrium
(B) 60%
(C) 80%
(D) 100%
64. A screw jack has a thread of 10 mm pitch.
What effort applied at the end ofa handle
400 mm long will be required to lift a load
of 2 kN, if the efficiency at this load is 45%.
(A) 17.7N
(A) 2.5KN
(B) 20.7N
(B) 5KN
(C) 25.7N
(C) 1.25KN
(D) 35.7N
(D) 10KN
65. The velocity ratio of a single purchase crab
69. On turning a corner, a motorist rushing at
winch can be increased by
20 m/s, finds a child on the road50 m
(a) increasing the length of the handle
ahead. He instantly stops the engine and
(b) increasing the radius of the load drum
applies brakes, so as to stop the car within
(c) increasing the number of teeth on the
10 m ofthe child. Calculate retardation,
pinion
(A) -5m/sec2
(d) all of the above
(B) 5m/sec2
66. Find the reactions at A and B.
(C) 15m/sec2

GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC

Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT
08744886600 WE WORK WITH THE STUDENT!!!!!!!

(D) -15m/sec2 action. This is known as

70. Which of the following statement is wrong (a) Law of Conservation of Momentum
(a) A body falling freely under the force of (b) Newton’s Law of Collision of Elastic
gravity is an example of motion under Bodies
variable acceleration. (c) both (a) and (b)
(b) A bus going down the valley may have (d) none of them
variable acceleration. 75. The loss of kinetic energy due to direct
(c) A lift going down in a gold mine cannot impact of two bodies depends
have constant acceleration in the entire (a) the mass of two bodies
journey. (b) the initial velocities of two bodies
(d) In a cricket match, the ball does not (c) the final velocities of two bodies
move with constant acceleration. (d) Both (a) and (b) D
71. In a factory, an elevator is required to carry 76. The work done is said to be zero, when
a body of mass 100 kg. Whatwill be the (a) some force acts on a body, but
force exerted by the body on the floor of displacement is zero.
the lift, when (a) the lift is moving upwards (b) no force acts on the body, but
withretardation of 0.8 m/s2 displacement takes place,
(A) 1000N (c) either (a) or (b)
(B) 900N 77. Forces are called concurrent when their
(C) 1100N lines of action meet in
(D) 1200N (a) one point
72. A ball of mass 1 kg moving with a velocity of (b) two points
2 m/s impinges directly on aball of mass 2 (c) plane
kg at rest. The first ball, after impinging, (d) perpendicular planes
comes to rest. Find the velocity of the 78. On a ladder resting on smooth ground and
secondball after the impact and the leaning against vertical wall, the force of
coefficient of restitution. friction will be
(A) 1m/sec, 1 (a) towards the wall at its upper end
(B) 0.5m/sec, 0.5 (b) away from the wall at its upper end
(C) 1m/sec, 0.5 (c) upwards at its upper end
(D) 1m/sec, 1.5 (d) downwards at its upper end
73. A ball is dropped from a height of 25 metres 79. Which of the following is the example of
upon a horizontal floor. Find the coefficient lever of first order
of restitution between the floor and the (a) arm of man
ball, if it rebounds to a height of 16 metres. (b) pair of scissors
(A) 0.2 (c) pair of clinical tongs
(B) 0.4 (d) all of the above
(C) 0.6 80. When trying to turn a key into a lock,
(D) 0.8 following is applied
74. The total momentum of two bodies remains (a) coplanar force
constant after collision or any other mutual (b) lever
GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC
Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT
08744886600 WE WORK WITH THE STUDENT!!!!!!!

(c) moment d) Enter

(d) couple
81. -A scanner scans Q87- Any data or instruction entered into the
a) Pictures memory of a computer of a the memory
b) Text of a computer is considered as
c) Both a) Storage
d) Neither picture nor text b) Output
Q82- Computer gathers data, which means that c) Input
they allow users to.................... data d) Information

a) Present Q88- Which part of the computer helps to

b) Input stores information
c) Output a) Disk drive
d) Store b) Keyboard
c) Monitor
Q83- Which of the following is an example of an
input device d) Printer

a) Scanner Q89- CDs are of which shape

b) Speaker a) Square
c) CD b) Rectangular
d) Printer c) Round
Q84- Pointing device includes the following d) hexagonal
except Q90- A nibbles equal to ......................... bits
a) Mouse a) 4
b) Pen input b) 8
c) Trackball c) 16
d) Keyboard d) 32
Q85- What type of device is a computer printer

a) Input
b) Input/output
c) Software
d) Output

Q86- To move to the beginning of a line of text,

press the.............. key

a) Page up
b) Shift
c) Home
GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC
Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT
08744886600 WE WORK WITH THE STUDENT!!!!!!!

121. An aircraft, moving horizontally at 108 125. The linear velocity of a rotating body is
km/hr at an altitude of 1000 m given by the relation
towards a target on the ground, releases a
bomb which hits it. Estimate the horizontal (a) v=r ω
distance of theaircraft from the target. (b) v=r/ω
(c) v = ω/r
A. 129m (d) v = ω2/r
B. 229m
C. 329m 126.The piston of a steam engine moves
D. 429m with simple harmonic motion. The
crankrotates at 120 r.p.m. and the stroke
122. Which of the equation is projectile length is 2 meters. Find the velocity and
motion equation of trajectory acceleration of the
piston, when it is at a distance of 0.75
meter from the centre.

A. 7.3m/sec
B. 8.3m/sec
C. 9.3m/sec
D. 10.3m/sec

127. A weight of 100 N is attached to two

springs of stiffness 400 N/m and 500 N/m
connected together vertically. Determine
123. A ball is projected upwards with a the period of oscillation of the weight.
velocity of 15 m/s at an angle of 25° withthe
A. 3.35 s
horizontal. What is the horizontal range of
B. 2.35 s
the ball?take Sin(50) = 0.76
C. 1.35 s
A. 10.6m D. 0.35 s
B. 17.6m
128. The work done is said to be zero,
C. 22.6m
(a) some force acts on a body, but displacement
D. 27.6m
is zero.
124. A flywheel starts from rest and revolves
(b) No force acts on the body, but
with an acceleration of 0.5 rad/sec2. What will
displacement takes place
be its angular velocity
(c) either (a) or (b)
1. 15 rad/sec (d) None of the above
2. 25 rad/sec
129. Find dimensional formula for universal
3. 5 rad/sec
constant of gravity (G).
4. 35rad/sec
A. M1 L3 T-2

GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC

Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT
08744886600 WE WORK WITH THE STUDENT!!!!!!!

B. M-1 L2 T-2 Q135)An electron has a speed of 600 m/s with

C. M-1 L3 T-1 an accuracy of 0.005%. The certainty with which
D. M-1 L3 T-2 the position of the electron can be located is

130. What is the value of reflectivity for (a) 1.058x10-3

Black Body? (b) 1.96x10-3
(c) 2.69x10-3
A. 1 (d) 3.85x10-3
B. 0
C. Between 0 to 1 Q136)The number of nodal planes 4d orbital
D. Greater than 1 has is

131. A water tank is constructed on top of (a) 0

building with what speed water will come (b) 1
out of a tap 6m below water level in tank. (c) 2
(d) 3
A. 19m/sec
B. 17m/sec Q137)The number of orbitals in the second
C. 15m/sec principal energy level of an atom (n=2) is
D. 11m/sec
(a) 2
132. Value of critical Reynolds number for flow (b) 4
field is (c) 6
(d) 10
A. 2000
B. 4000 Q138) Which of the following elements is the
C. Between 2000 to 4000 most electronegative
D. Less than 2000
(a) C
133. Pick out the isoelectronic structures from (b) N
the following: (c) O
(d) F
CH3+ 2.H3O+ 3.NH3 4.CH3
(a) 1 and 2 Q139)Which of the following statements is
(b) 3 and 4 false?
(c) 1 and 3
(d) 2,3 and 4 (a) alkali metals usually have a+1 oxidation
state
Q134) The electronic configuration of element (b) alkali metals forms oxides that act as
of atomic number 24 is basic anhydrides
(c) alkali metals form covalent bonds with
(a) 1s2 2s2 2p6 3s2 3p6 4s1 3d5 oxygen
(b) 1s2 2s2 2p6 3s2 3p6 4s1 3d6 (d) alkali metals have relatively low first
(c) 1s2 2s2 2p6 3s2 3p6 4s2 3d4 ionization energies
(d) 1s2 2s2 2p6 3s2 3p4 4s2 3d6
GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC
Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
FOR MORE CALL: 07503776600 WE JUST DON’T WORK FOR STUDENT
08744886600 WE WORK WITH THE STUDENT!!!!!!!

Q140)Haemattitie ore is concentrated by d) Cu & Zn

a) Hydraulic washing Q146) A metal ‘M’ occurs in earth’s crust as its

b) Froth-flotation process oxide ore , M2O3 . The alloy of this metal is used
c) Magnetic separation in making air craft [parts. The metal ‘M’ is :
d) Chemical separation
a) Copper
Q141)In the extraction of iron, smelting of the b) Aluminium
ore is carried out in c) Iron
d) Chromium
a) Electric furnace
b) Blast furnace 147) Which one is not an output device?
c) Muffle furnace a) Printer
d) Reverberatory furnace b) Monitor
c) Keyboard
Q142)Name of the element present as impurity d) Modem
in the haematite ore and gets removed as
148) Which one works as an output and input
slag in the smelting process is
device?
a) Carbon a) Modem
b) Scanner
b) Sulphur
c) Mouse
c) Phosphorous d) Monitor
d) Silicon
149) All computers must have:
Q143)The form of iron obtained from blast a) Word processing software
furnace during the extraction of iron is b) An operating system
c) A printer attached
a) Pig iron d) A virus checking program
b) Cast iron
c) Wrought iron 150) The brain of the computer is called:
d) Steel a) Random Access Memory or RAM
b) Central Processing Unit or CPU
Q144)An Alloy which does not Contain Copper c) Read Only Memory or ROM
is: d) BIOS

a) Brass
b) Bronze
c) Bell Metal
d) Solder

Q145)Rolled gold is Formed by alloying:

a) Cu& Au
b) Cu & Ag
c) Cu & AI
GCC THE BEST FOR LEET Subscribe us on Youtube/leetcoaching in GCC
Follow us on Facebook.com/leetcoaching/ FOR MORE VISIT: www.leetcoaching .com
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner