Scribd
Upload
43 views3 pages

XANEOXYC

The document provides specifications for an AirSep QuietLife 5 oxygen concentrator including: - It separates oxygen from ambient air and delivers purified oxygen at 5 liters per minute at up to 93% concentration. - It has dimensions of 41.9x36.8x69.9cm, weighs 26kg, and operates on 220-240V power supply. - It includes various filters to purify the oxygen and an oxygen sensing device to continuously monitor oxygen concentration and trigger an alarm if it drops below 80%.

Uploaded by

james
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views3 pages

XANEOXYC

The document provides specifications for an AirSep QuietLife 5 oxygen concentrator including: - It separates oxygen from ambient air and delivers purified oxygen at 5 liters per minute at up to 93% concentration. - It has dimensions of 41.9x36.8x69.9cm, weighs 26kg, and operates on 220-240V power supply. - It includes various filters to purify the oxygen and an oxygen sensing device to continuously monitor oxygen concentration and trigger an alarm if it drops below 80%.

Uploaded by

james
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Specifications

An oxygen concentrator is an electrically-operated device intended to provide supplemental


low-flow oxygen therapy. The unit separates oxygen from the ambient air, delivering high-
quality purified oxygen to patients.

Oxygen Sensing Device (OSD): measures the concentration of oxygen produced by the
concentrator.

Note: Features indicated below are for the model AirSep QuietLife 5 with OSD.
For information on the DeVilbiss series 515K with OSD, refer to 2004 edition of the
catalogue.

Specifications: Casing with vertical layout and handle, and 4 wheels.


Overall dimensions: WDH 41.9x36.8x69.9cm.
Weight: 26kg
Adjustable flow meter.
Power requirement : 220 to 240V-50Hz, 2.0 amps, 115V-60HZ
230V-60HZ
Power consumption: 285W, protected by a 2.5A circuit breaker switch (230V).
Oxygen delivery: O2 delivery rate: 5 litres per minute (LMP).
Maximum recommended flow: 5 LPM.
Outlet pressure: 9.7psig (68.6kPa).
Oxygen percentage: 1-5 LPM equivalent to 93% ±3%.
Operating altitude: 0-1500m no degradation in performance.
1500-3000m:
- 1-3 LPM 95% ±3%
- 4 LPM 92% ±3%
- 5 LPM 90% ±3%
3000-4000m - not recommended.
Operating environment range: temperature 10 to 40°C with humidity
range >35%.
OSD continuous monitoring of O2 concentration.
Audible alarm, activates when O2 drops to ±80%.
- Sound level: overall average <40 decibels.
- Operating system: time cycle and pressure swing.
Pressure relief valve: 44psig ±3psig (303kPa with ±21kPa).
Storage conditions: Temperature 0 to 50°C.
Relative humidity from 0 to 95%, including condensation.

Three types of filters:


1. Foam pre-filter for dust, rectangular (XANEOXYCAQFG) for large dust particles.
- Located at the rear of the device.
2. Bacterial and product filters (XANEOXYCAQFB): captures particles up to 0.5µ.
- Located in front of the oxygen outlet.
3. Felt filter for fine dust, round (XANEOXYCAQFD).
Unit presentation: 1 oxygen concentrator,1 service set and 1 dust filter.
Supplied with user and maintenance manuals, multilingual: English,
French and Spanish, others when available.
Labelling: Reference number, serial number, manufacturer’s name, and
CE mark and reference number of notifying body.
Packaging: Supplied in reinforced box.
Handle with care, respecting the "top-bottom" markings.
Labelling: item description, reference number, serial umber,
manufacturer’s name, and CE mark and reference number of notifying
body.
Quality: Complies with Medical Device Directive of 93/42/EEC
EN 60-601-1-2: Electromagnetic compatibility of electro-medical devices.
ISO 8359: Oxygen concentrators for medical use

Accessories

The set is composed of :


- 6 OXYGENE nasal cannula, dbl prong,
adult, + conn.tube, (MCTDCANNOA2S)
- 1 FILTER, gross particle, set of 6
- 1 HUMIDIFIER, 300 ml , multiple use
- 1 OXYGEN TUBE, diam 5 x 8 mm, 15 m
- 1 CONNECTOR, for O2 tube Ø 4-8 mm
XANEOXYCAQ5SS

FILTER DUST, round


The nternal Felt/ fine particles filter requires
changing every 6 months or 5000 hours of use

XANEOXYCAQ5FD

FILTER GROSS PARTICLES, 6 pcs, 205663


Dust filter/ gross particles. Need to be washed
with soap water after every 100 hours of use.
XANEOXYCAQ5FG

Must be replace after every 25’.000 hours of use.

XANEOXYCAQ5FB

XANEOXYCAQ5S To connect oxygen Tube and oxygen cannula

HUMIDIFIER, 300ml, E 7100

Can be sterelised
XANEOXYCDC5H
NIPPLE NUT, for connecting O2 tube

XANEOXYCDC5TOS

You might also like