Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents

here and specially disclaims any implied warranties of merchantability or fitness
for any purpose. Further the vendor reserves the right to revise this publication
and to make changes to the contents here without obligation to notify any party
beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we
will not be responsible for any mistakes found in this user’s manual. All the brand
and product names are trademarks of their respective companies.

Dichiarazione di conformità Short Declaration of conformity

sintetica We declare this product is complying
Ai sensi dell’art. 2 comma 3 del D.M. with the laws in force and meeting all
275 del 30/10/2002 the essential requirements as specified
Si dichiara che questo prodotto è by the directives
conforme alle normative vigenti e 2004/108/CE, 2006/95/CE and
soddisfa i requisiti essenziali richiesti 1999/05/CE
dalle direttive whenever these laws may be applied
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili

Downloaded from www.Manualslib.com manuals search engine

 Table of Contents
Chapter 1: Introduction ...............................................................1
1.1 Before You Start......................................................................... 1
1.2 Package Checklist ..................................................................... 1
1.3 Motherboard Specifications ....................................................... 2
1.4 Rear Panel Connectors ............................................................. 4
1.5 Motherboard Layout .................................................................. 5
Chapter 2: Hardware Installation ................................................7
2.1 Install Central Processing Unit (CPU) ....................................... 7
2.2 Install a Heatsink ....................................................................... 8
2.3 Connect Cooling Fans ............................................................... 9
2.4 Install System Memory ............................................................ 10
2.5 Expansion Slots ....................................................................... 12
2.6 Jumper Setting ........................................................................ 13
2.7 Headers & Connectors ............................................................ 14
Chapter 3: UEFI BIOS & Software.............................................19
3.1 UEFI BIOS Setup .................................................................... 19
3.2 BIOS Update ........................................................................... 19
3.3 Software................................................................................... 24
Chapter 4: Useful Help ..............................................................27
4.1 Driver Installation..................................................................... 27
4.2 AMI BIOS Beep Code.............................................................. 28
4.3 Troubleshooting ....................................................................... 28
4.4 RAID Functions ....................................................................... 30
4.5 AMD Dual Graphics Technology ............................................. 34
Appendix: Specifications In Other Languages .......................36
Arabic ......................................................................................................... 36
French ........................................................................................................ 38
German....................................................................................................... 40
Italian .......................................................................................................... 42
Japanese .................................................................................................... 44
Polish.......................................................................................................... 46
Portuguese ................................................................................................. 48
Russian....................................................................................................... 50
Spanish....................................................................................................... 52

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

CHAPTER 1: INTRODUCTION
1.1 Before You Start
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„ Prepare a dry and stable working environment with
sufficient lighting.
„ Always disconnect the computer from power outlet before
operation.
„ Before you take the motherboard out from anti-static bag,
ground yourself properly by touching any safely grounded
appliance, or use grounded wrist strap to remove the static
charge.
„ Avoid touching the components on motherboard or the rear
side of the board unless necessary. Hold the board on the
edge, do not try to bend or flex the board.
„ Do not leave any unfastened small parts inside the case
after installation. Loose parts will cause short circuits which
may damage the equipment.
„ Keep the computer from dangerous area, such as heat
source, humid air and water.
„ The operating temperatures of the computer should be 0 to
45 degrees Celsius.
„ To avoid injury, be careful of:
Sharp pins on headers and connectors
Rough edges and sharp corners on the chassis
Damage to wires that could cause a short circuit

1.2 Package Checklist

; Serial ATA Cable x2
; Rear I/O Panel for ATX Case x1
; Installation Guide x1
; Fully Setup Driver DVD x1
Note: The package contents may be different due to the sales region or models in which it was
sold. For more information about the standard package in your region, please contact your dealer
or sales representative.

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

1.3 Motherboard Specifications

Specifications
Socket FM2 for AMD A-series processor
CPU Support Maximum CPU TDP (Thermal Design Power): 100Watt
* Please refer to www.biostar.com.tw for CPU support list.
AMD A85 FCH (Hi-Fi A85S3)
Chipset AMD A75 FCH (Hi-Fi A75S3)
AMD A55 FCH (Hi-Fi A55S3)
Supports Dual Channel DDR3 800/ 1066/ 1333/ 1600/ 1866
2 x DDR3 DIMM Memory Slot, Max. Supports up to 32 GB Memory
Memory
Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 module
* Please refer to www.biostar.com.tw for Memory support list.
AMD A85/A75/A55 FCH
Storage Supports RAID 0,1,10, 5 & AHCI (AMD A85 FCH)
Supports RAID 0,1,10, & AHCI (AMD A75/A55 FCH),
Realtek RTL 8111F
LAN
10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability
ALC662
Audio Codec
5.1 Channels, High Definition Audio, Biostar Hi-Fi
AMD A85/A75 FCH:
6x USB 2.0 port (2 on rear I/Os and 4 via internal headers)
USB 4x USB 3.0 port (2 on rear I/Os and 2 via internal headers)
AMD A55 FCH:
8x USB 2.0 port (4 on rear I/Os and 4 via internal headers)
1x PCI Slot
Expansion Slots 1x PCIe 2.0 x1 Slot
1x PCIe 2.0 x16 Slot
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
1x PS/2 Mouse 1x PS/2 Mouse 1x PS/2 Mouse
1x PS/2 Keyboard 1x PS/2 Keyboard 1x PS/2 Keyboard
1x VGA Port 1x VGA Port 1x VGA Port
Rear I/Os 1x HDMI Port 1x DVI Port 1x DVI Port
1x LAN port 1x LAN port 1x LAN port
2x USB 2.0 Port 2x USB 2.0 Port 4x USB 2.0 Port
2x USB 3.0 Port 2x USB 3.0 Port 3x Audio Jack
3x Audio Jack 3x Audio Jack

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
Specifications
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
6x SATA 6.0Gb/s Connector 6x SATA 6.0Gb/s Connector 6x SATA 3.0Gb/s Connector
2x USB 2.0 Header 2x USB 2.0 Header 2x USB 2.0 Header
1x USB 3.0 Header 1x USB 3.0 Header 1x 4-Pin Power Connector
1x 4-Pin Power Connector 1x 4-Pin Power Connector 1x 24-Pin Power Connector
1x 24-Pin Power Connector 1x 24-Pin Power Connector 1x CPU Fan Connector
Internal I/Os 1x CPU Fan Connector 1x CPU Fan Connector 1x System Fan Connector
1x System Fan Connector 1x System Fan Connector 1x Front Panel Header
1x Front Panel Header 1x Front Panel Header 1x Front Audio Header
1x Front Audio Header 1x Front Audio Header 1x Clear CMOS Header
1x Clear CMOS Header 1x Clear CMOS Header 1x Printer Port Header
1x Printer Port Header 1x Printer Port Header 1x Serial Port Header
1x Serial Port Header 1x Serial Port Header
Form Factor microATX Form Factor, 244 mm x 191 mm
Windows XP / Vista / 7/ 8
OS Support Biostar reserves the right to add or remove support for any OS with or without
notice.

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

1.4 Rear Panel Connectors

Hi-Fi A85S3

Hi-Fi A75S3

Hi-Fi A55S3

Note 1: HDMI / DVI-D / VGA Output require an AMD family processor with intedrated graphics.
Note 2: The mainboard supports two independent display outputs.
Note 3: Since the audio chip supports High Definition Audio Specification, the function of each
audio jack can be defined by software. The input / output function of each audio jack
listed above represents the default setting. However, when connecting external
microphone to the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.
Note 4: Maximum resolution:
Outputs Maximum resolution Bit Depth
1920 x 1080 @60Hz 24, 30, 36 bpp
HDMI
1920 x 1200 @60Hz 24 bpp
1920 x 1200 @60Hz 30 bpp
DVI-D
2560 x 1600 @60Hz 24 bpp
VGA 1920 x 1600 @60Hz --

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

1.5 Motherboard Layout

Hi-Fi A85S3

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual
Hi-Fi A75S3/Hi-Fi A55S3

Note1: ■ represents the 1st pin.

Note2: HDMI connector is for Hi-Fi A85S3. DVI connector is for Hi-Fi A75S3 & Hi-Fi A55S3.
Note3: The USB 3.0 header is only for Hi-Fi A85S3 and Hi-Fi A75S3

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

CHAPTER 2: HARDWARE INSTALLATION

2.1 Install Central Processing Unit (CPU)
Step 1: Locate the CPU socket on the motherboard

Step 2: Pull the socket locking out from the socket and then raise the lever up to
a 90-degree angel.

Step 3: Look for the white triangle on socket, and the gold triangle on CPU
should point towards this white triangle. The CPU will fit only in the
correct orientation.

Note: The CPU fits only in one correct orientation. Do not force the CPU into the socket to
prevent damaging the CPU.

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual
Step 4: Hold the CPU down firmly, and then close the lever to locked the position

2.2 Install a Heatsink

Step 1: Place the heatsink and fan assembly onto the retention frame. Match the
heatsink clip with the socket mounting-lug. Hook the spring clip to the
mounting-lug.

Step 2: On the other side, push the retention clip straight down to lock into the
plastic lug on the retention frame, and then press down the locker until it
stops.

Note1: Do not forget to connect the CPU fan connector.

Note2: For proper installation, please kindly refer to the installation manual of your CPU
heatsink.

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

2.3 Connect Cooling Fans

These fan headers support cooling-fans built in the computer. The fan cable and
connector may be different according to the fan manufacturer. Connect the fan
cable to the connector while matching the black wire to pin#1.

CPU_FAN1: CPU Fan Header

Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate sense
4 Smart Fan Control
(By Fan)

SYS_FAN1: System Fan Header

Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate sense

Note: CPU_FAN1, SYS_FAN1 support 4-pin and 3-pin head connectors. When connecting
with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual
2.4 Install System Memory
A. DDR3 Modules

Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM
on the slot such that the notch on the DIMM matches the break on the slot.

Step 2: Insert the DIMM vertically and firmly into the slot until the retaining chip
snap back in place and the DIMM is properly seated.

Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.

10

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

B. Memory Capacity
DIMM Socket Location DDR3 Module Total Memory Size
DDR3_A1 512MB/1GB/2GB/4GB/8GB/16GB
Max is 32GB.
DDR3_B1 512MB/1GB/2GB/4GB/8GB/16GB

C. Dual Channel Memory Installation

Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status DDR3_A1 DDR3_B1
Disabled O X
Disabled X O
Enabled O O
(O means memory installed, X means memory not installed.)
Note: The DRAM bus width of the memory module must be the same (x8 or x16)

11

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual
2.5 Expansion Slots

PEX16_1: PCI-Express Gen2 x16 Slot

- PCI-Express 2.0 compliant.
- Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
- PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.

PEX1_1: PCI-Express Gen2 x1 Slot

- PCI-Express 2.0 compliant.
- Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total

PCI1: Peripheral Component Interconnect Slot

This motherboard is equipped with 1 standard PCI slot. PCI stands for Peripheral
Component Interconnect, and it is a bus standard for expansion cards.

Install an Expansion Card

You can install your expansion card by following steps:
1. Read the related expansion card's instruction document before install the
expansion card into the computer.
2. Remove your computer's chassis cover, screws and slot bracket from the
computer.
3. Place a card in the expansion slot and press down on the card until it is
completely seated in the slot.
4. Secure the card’s metal bracket to the chassis back panel with a screw.
5. Replace your computer's chassis cover.
6. Power on the computer, if necessary, change BIOS settings for the
expansion card.
7. Install related driver for the expansion card.

12

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

2.6 Jumper Setting

The illustration shows how to set up jumpers. When the jumper cap is placed on
pins, the jumper is “close”, if not, that means the jumper is “open”.

Pin opened Pin closed Pin1-2 closed

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

1 3
Pin 1-2 Close:
Normal Operation (default).

1 3
Pin 2-3 Close:
Clear CMOS data.

※ Clear CMOS Procedures:

1. Remove AC power line.
2. Set the jumper to “Pin 2-3 close”.
3. Wait for five seconds.
4. Set the jumper to “Pin 1-2 close”.
5. Power on the AC.
6. Load Optimal Defaults and save settings in CMOS.

13

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

2.7 Headers & Connectors

ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX power
supply.

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

ATXPWR2: ATX Power Source Connector

This connector will provide +12V to CPU power circuit.

Pin Assignment
1 +12V
2 +12V
3 Ground
4 Ground

Note1: Before you power on the system, please make sure that both ATXPWR1 and
ATXPWR2 connectors have been plugged-in.
Note2: Insufficient power supplied to the system may result in instability or the
peripherals not functioning properly. Use of a PSU with a higher power output is
recommended when configuring a system with more power-consuming devices.

14

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.

Pin Assignment Function Pin Assignment Function

1 +5V 9 N/A
N/A
2 N/A Speaker 10 N/A
3 N/A Connector 11 N/A N/A
4 Speaker 12 Power LED (+)
5 HDD LED (+) 13 Power LED (+) Power LED
Hard drive LED
6 HDD LED (-) 14 Power LED (-)
7 Ground 15 Power button
Reset button Power-on button
8 Reset control 16 Ground

SATA1~SATA6: Serial ATA Connectors

These connectors connect to SATA hard disk drives via SATA cables.
„ Hi-Fi A85S3 & Hi-Fi A75S3 satisfy the SATA 3.0 spec and with transfer rate of 6.0Gb/s.
„ Hi-Fi A55S3 satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Pin Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
7 Ground

15

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

JFRONT_USB3_1: Header for USB 3.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with a wide range of simultaneously accessible
external Plug and Play peripherals.

Pin Assignment Pin Assignment

1 VBUS0 11 D2+
2 SSRX1- 12 D2-
3 SSRX1+ 13 Ground
4 Ground 14 SSTX2+
5 SSTX1- 15 SSTX2-
6 SSTX1+ 16 Ground
7 Ground 17 SSRX2+
8 D1- 18 SSRX2-
9 D1+ 19 VBUS1
10 ID 20 Key
Note: The USB 3.0 header is only for Hi-Fi A85S3 and Hi-Fi A75S3

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with a wide range of simultaneously accessible
external Plug and Play peripherals.

Pin Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
7 Ground
8 Ground
9 NC
10 Key

16

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front
panel. This header supports HD and AC’97 audio front panel connector.

HD Audio AC’97
Pin Assignment Pin Assignment
1 Mic Left in 1 Mic In
2 Ground 2 Ground
3 Mic Right in 3 Mic Power
4 GPIO 4 Audio Power
5 Right line in 5 RT Line Out
6 Jack Sense 6 RT Line Out
7 Front Sense 7 Reserved
8 Key 8 Key
9 Left line in 9 LFT Line Out
10 Jack Sense 10 LFT Line Out
Note1: It is recommended that you connect a high-definition front panel audio module
to this connector to avail of the motherboard's high definition audio capability.
Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an
AC'97 front audio output cable. The function can be found via O.S. Audio Utility.

J_COM1: Serial Port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin Assignment
1 Carrier detect
2 Received data
3 Transmitted data
4 Data terminal ready
5 Signal ground
6 Data set ready
7 Request to send
8 Clear to send
9 Ring indicator
10 NC

17

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

J_PRINT1: Printer Port Connector

This header allows you to connector printer on the PC.

Pin Assignment Pin Assignment

1 -Strobe 14 Ground
2 -ALF 15 Data 6
3 Data 0 16 Ground
4 -Error 17 Data 7
5 Data 1 18 Ground
6 -Init 19 -ACK
7 Data 2 20 Ground
8 -Scltin 21 Busy
9 Data 3 22 Ground
10 Ground 23 PE
11 Data 4 24 Ground
12 Ground 25 SCLT
13 Data 5 26 Key

18

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

CHAPTER 3: UEFI BIOS & SOFTWARE

3.1 UEFI BIOS Setup
„ For better system performance, the UEFI BIOS firmware is being
continuously updated. The UEFI BIOS information described below in this
manual is for your reference only and the actual UEFI BIOS information
and settings on board may be different from this manual
„ For further information of setting up the UEFI BIOS, please refer to the
UEFI BIOS Manual in the Setup DVD.

3.2 BIOS Update

There are three ways to update the BIOS:
BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher.

1. BIOS Update Utility

1. Installing BIOS Update Utility from the DVD Driver.
2. Download the proper BIOS from www.biostar.com.tw .

3. Open BIOS Update Utility and

click the Update BIOS button on
the main screen.

4. A warning message will show

up to request your agreement to
start the BIOS update. Click OK to
start the update procedure.

5. Choose the location for your

BIOS file in the system. Please
select the proper BIOS file, and
then click on Open. It will take
several minutes, please be
patient.

19

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

6. After the BIOS Update process is

finished, click on OK to reboot the
system.

7. While the system boots up and the full screen logo shows up, please press

the <Delete> key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

Backup BIOS
Click the Backup BIOS button on the
main screen for the backup of BIOS,
and select a proper location for your
backup BIOS file in the system, and
click Save.

20

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
2. Online Update Utility
1. Installing BIOS Update Utility from the DVD Driver.
2. Please make sure the system is connected to the internet before using this
function.

3. Open BIOS Update Utility and

click the Online Update button
on the main screen.

4. An open dialog will show up to

request your agreement to
start the BIOS update. Click
Yes to start the online update
procedure.

5. If there is a new BIOS version,

the utility will ask you to
download it. Click Yes to
proceed.

6. After the download is

completed, you will be asked
to program (update) the BIOS
or not. Click Yes to proceed.

7. After the updating process is

finished, you will be asked you
to reboot the system. Click OK
to reboot.

21

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

8. While the system boots up and the full screen logo shows up, press
<Delete> key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

3. BIOSTAR BIOS Flasher

BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and
simple way to update your BIOS via USB pen drive.
Note1: This utility only allows storage device with FAT32/16 format and single partition.
Note2: Shutting down or resetting the system while updating the BIOS will lead to system
boot failure.

The BIOSTAR BIOS Flasher is built in the BIOS ROM. To enter the utility, press
<F12> during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIOSTAR BIOS Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, copy and save the BIOS file into a USB flash (pen) drive.

3. Insert the USB pen drive that contains the BIOS file to the USB port.

4. Power on or reset the computer and then press <F12> during the POST process.

5. After entering the POST

screen, the BIOS-FLASHER
utility pops out. Choose [fs0] to
search for the BIOS file.

22

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

6. Select the proper BIOS file,

and a message asking if you
are sure to flash the BIOS file.
Click Yes to start updating
BIOS.

7. A dialog pops out after BIOS

flash is completed, asking you
to restart the system. Press the
[Y] key to restart system.

8. While the system boots up and the full screen logo shows up, press
<Delete> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

23

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

3.3 Software
Installing Software
1. Insert the Setup DVD to the optical drive. The driver installation program would
appear if the Autorun function has been enabled.
2. Select Software Installation, and then click on the respective software title.
3. Follow the on-screen instructions to complete the installation.
Note1: All the information and content about following software are subject to be changed
without notice. For better performance, the software is being continuously updated.
Note2: The information and pictures described below are for your reference only. The actual
information and settings on board may be slightly different from this manual.

Launching Software
After the installation process is completed, you will see the software icon showing on
the desktop. Double-click the icon to launch it.
eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our Tech-Support
system. This utility will collect the system information which is useful for analyzing the
problem you may have encountered, and then send these information to our
tech-support department to help you fix the problem.
Note: Before you use this utility, please set Outlook Express as your default e-mail client application
program.

represents important
*
information that you
This block will show
must provide. Without
this information, you may
the information which *Describe condition
of your system.
would be collected in
not be able to send out the mail.
the mail.

*Select your area or

the area close to you.

Provide the e-mail

address that you would
like to send the copy to.

*Provide the name of

the memory module
manufacturer.

Provide the name of

the power supply
manufacturer and the
model no.

Send the mail out. Exit this dialog.

Save these information to a .txt file

24

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

After filling up this information, click “Send”

to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you will
see a saving dialog appears asking you to enter file name.

Enter the file name and then click “Save”.

Your system information will be saved to
a .txt file.

Open the saved .txt file, you will see

your system information including
motherboard/BIOS/CPU/video/
device/OS information. This information
is also concluded in the sent mail.

Note1: We will not share customer’s data with any other third parties, so please feel free to
provide your system information while using eHot-Line service.
Note2: If you are not using Outlook Express as your default e-mail client application, you may
need to save the system information to a .txt file and send the file to our tech support with other
e-mail application. Go to the following web http://www.biostar.com.tw/app/en/about/contact.php
for getting our contact information.

25

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

Smart EAR
Smart EAR is a windows-based audio utility which allows you to easily
adjust system volume. With its user-friendly GUI, you can also adjust
impedance setting (Low/High Gain) to optimize your headphone
performance.

z High/Low Gain Switch: Keep the gain switch to low for low impedance
headphone and set to high for high impedance headphone.
z Mute Button: To disable system sound
z Volume Control Knob: The volume can be finely adjusted by turning the
knob either clockwise or anti-clockwise to increase or decrease system
volume accordingly.
z Information Button: Get information of the application
z Minimize Button: Minimize the application window to the taskbar
z Exit Button: Exit the application
Note:
1. Smart EAR is only supported by Windows 7/8 and BIOSTAR Hi-Fi series motherboards.
2. High/Low Gain Switch is only for “Front Panel Audio Header”, please make sure you are
connecting your headphone to the front panel I/O.

26

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
CHAPTER 4: USEFUL HELP
4.1 Driver Installation
After you installed your operating system, please insert the Fully Setup Driver
DVD into your optical drive and install the driver for better system performance.

You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.
Note: If this window didn’t show up after you insert the Driver DVD, please use file
browser to locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will list the
compatible driver for your motherboard and operating system. Click on each
device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide will
list the software available for your system, click on each software title to launch
the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver DVD.
Click on the Manual icon to browse for available manual.
Note: You will need Acrobat Reader to open the manual file. Please download the latest
version of Acrobat Reader software from http://get.adobe.com/reader/

27

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

4.2 AMI BIOS Beep Code

Boot Block Beep Codes
Number of Beeps Description
Continuing Memory sizing error or Memory module not found

POST BIOS Beep Codes

Number of Beeps Description
1 Success booting.
8 Display memory error (system video adapter)

4.3 Troubleshooting
Probable Solution
1. There is no power in the system. 1. Make sure power cable is securely
Power LED does not shine; the fan plugged in.
of the power supply does not work 2. Replace cable.
2. Indicator light on keyboard does 3. Contact technical support.
not shine.
System is inoperative. Keyboard lights Using even pressure on both ends of the
are on, power indicator lights are lit, DIMM, press down firmly until the module
and hard drives are running. snaps into place.
System does not boot from a hard disk 1. Check cable running from disk to
drive, but can be booted from optical disk controller board. Make sure
drive. both ends are securely plugged in;
check the drive type in the standard
CMOS setup.
2. Backing up the hard drive is
extremely important. All hard disks
are capable of breaking down at any
time.
System only boots from an optical 1. Back up data and applications files.
drive. Hard disks can be read, 2. Reformat the hard drive. Re-install
applications can be used, but system applications and data using backup
fails to boot from a hard disk. disks.
Screen message shows “Invalid Review system’s equipment. Make sure
Configuration” or “CMOS Failure.” correct information is in setup.
System cannot boot after user installs 1. Set master/slave jumpers correctly.
a second hard drive. 2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility with
other drives.

28

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

CPU Overheated
If the system shutdown automatically after power on system for seconds,
that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically
to avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.

Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.

29

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual
4.4 RAID Functions
Operating System
Supports Windows Vista , Windows 7 and Windows 8.
Raid Arrays
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write
times for many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.
RAID Definitions
RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It
breaks up a large file into smaller blocks and performs disk reads and writes
across multiple drives in parallel. The size of each block is determined by the
stripe size parameter, which you set during the creation of the RAID set based
on the system environment. This technique reduces overall disk access time
and offers high bandwidth.
Features and Benefits
­ Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
­ Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
­ Benefits: provides increased data throughput, especially for large files. No
capacity loss penalty for parity.
­ Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
­ Fault Tolerance: No.
­ Total Capacity: (Minimal. HDD Capacity) x (Connected HDDs Amount)

Block 1 Block 2
Block 3 Block 4
Block 5 Block 6

30

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a
RAID 1 array system. The mirrored (backup) copy of the data can reside on the
same disk or on a second redundant drive in the array. RAID 1 provides a
hot-standby copy of data if the active volume or drive is corrupted or becomes
unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of
automatic backup that eliminates tedious manual backups to more expensive
and less reliable media.
Features and Benefits
­ Drives: Minimum 2, and maximum is 2.
­ Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
­ Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
­ Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
­ Fault Tolerance: Yes.

Block 1 Block 1
Block 2 Block 2
Block 3 Block 3

31

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual
RAID 10:
RAID 1 drives can be stripped using RAID 0 techniques.Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.
Features and Benefits
­ Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
­ Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.
­ Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
­ Fault Tolerance: Yes.

Block 1 Block 1 Block 2 Block 2

Block 3 Block 3 Block 4 Block 4
Block 5 Block 5 Block 6 Block 6

32

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It
writes data and parity blocks across all the drives in the array. Fault tolerance is
maintained by ensuring that the parity information for any given block of data is
placed on a different drive from those used to store the data itself.

Note: The RAID 5 function is only supported by A85 chipset.

Features and Benefits

­ Drives: Minimum 3.
­ Uses: RAID 5 is recommended for transaction processing and general
purpose service.
­ Benefits: An ideal combination of good performance, good fault tolerance,
and high capacity and storage efficiency.
­ Drawbacks: Individual block data transfer rate same as a single disk. Write
performance can be CPU intensive.
­ Fault Tolerance: Yes.

Disk 1

DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY

Disk 2

DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11

Disk 3

PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12

33

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual
4.5 AMD Dual Graphics Technology
AMD Dual Graphics Technology Introduction
When user adds a PCIE display adapter, it can be integrated with IGD to
show better performance. To make the two video devices work
simultaneously and normally, please refer to the following setting.
AMD Dual Graphics Requirement
„ Operating System: Windows Vista / Windows 7 / Windows 8
„ Supported Dual Graphics Combinations:

A10-Series A8-Series A6-Series

AMD Radeon™ Graphics Card
HD 7660D HD7560D HD 7540D
HD 6670 ● ●
HD 6570 ● ● ●
HD 6450 ●
● Recommended graphics cards for AMD dual-graphics

Note 1: A4-Series products do not support Dual Graphics.

Note 2: The information described above in this manual is for your reference only and the
actual information and settings on board may be different from this manual. For further AMD
Dual Graphics information, please visit the following website: http://www.amd.com

34

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3

AMD Dual Graphics Setup

Step 1: Insert Dual Graphics-Ready graphics card into PEX16_1 slot.

Step 2: Set the BIOS setting as follows:

[Chipset]→[North Bridge]→[GFX Configuration]
→[Surround View]→[Enabled]

Step 3: Install Driver DVD Chipset Driver, and reboot the system. Activate
AMD VISION Engine Control Center to make sure CrossFire has
been enabled.

35

Downloaded from www.Manualslib.com manuals search engine

 ‫‪Motherboard Manual‬‬

‫‪APPENDIX: Specifications In Other Languages‬‬

‫‪Arabic‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫اﻟﻤﺄﺧﺬ ‪ FM 2‬ﻟﻤﻌﺎﻟﺞ اﻳﻪ إم دى ‪ AMD‬ﺗﺴﻠﺴﻞ ‪A‬‬ ‫ﻗﺎﻋﺪة وﺣﺪة‬
‫اﻟﺤﺪ اﻷﻗﺼﻰ ﻟﻠﻄﺎﻗﺔ اﻟﺤﺮارﻳﺔ ﻓﻲ ﺗﺼﻤﻴﻢ اﻟﻤﻌﺎﻟﺞ ) ‪ 100 :( thermal design power – TDP‬واط‪.‬‬ ‫اﻟﻤﻌﺎﻟﺠﺔ‬
‫* ﻳﺮﺟﻰ اﻟﺮﺟﻮع إﻟﻰ اﻟﻤﻮﻗﻊ‪ www.biostar.com.tw‬ﻟﻘﺎﺋﻤﺔ دﻋﻢ اﻟﻤﻌﺎﻟﺞ ‪.CPU‬‬ ‫اﻟﻤﺮآﺰﻳﺔ‬
‫)‪AMD A85 FCH (Hi-Fi A85S3‬‬
‫ﻣﺠﻤﻮﻋﺔ‬
‫)‪AMD A75 FCH (Hi-Fi A75S3‬‬
‫اﻟﺸﺮاﺋﺢ‬
‫)‪AMD A55 FCH (Hi-Fi A55S3‬‬
‫ﺗﺪﻋﻢ ﻗﻨﺎة ﻣﺰدوﺟﺔ دي‪ .‬دي‪ .‬ار‪1866 / 1600 / 1333 / 1066 / 800 DDR3 .‬‬
‫‪ x2‬دي‪ .‬دي‪ .‬ار‪ DDR3 .‬ﻓﺘﺤﺎت اﻟﺬاآﺮة اﻟﻤﺰدوﺟﺔ ‪ ،DIMM‬ﺗﺘﺤﻤﻞ آﺤﺪ أﻗﺼﻰ ‪ 32‬ﺟﻴﺠﺎﺑﺎﻳﺖ ذاآﺮة‬
‫اﻟﺬاآﺮة‬
‫آﻞ ﻓﺘﺤﺔ ﻣﺰدوﺟﺔ ‪ DIMM‬ﺗﺘﺤﻤﻞ دون ‪ 512 ECC‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ ‪ 16/8/4/2/1/‬ﺟﻴﺠﺎﺑﺎﻳﺖ دي‪ .‬دي‪ .‬ار ‪DDR3‬‬
‫* ﻳﺮﺟﻰ اﻟﺮﺟﻮع إﻟﻰ اﻟﻤﻮﻗﻊ‪ www.biostar.com.tw‬ﻟﻘﺎﺋﻤﺔ دﻋﻢ اﻟﺬاآﺮة‪.‬‬
‫اﻳﻪ إم دى ‪FCH A85/A75/A55 AMD‬‬
‫ﺗﺘﺤﻤﻞ راﻳﺪ ‪(FCH A85)AHCI / 10 / 1 / 0 / 5 RAID‬‬ ‫اﻟﺘﺨﺰﻳﻦ‬
‫ﺗﺘﺤﻤﻞ راﻳﺪ ‪(FCH A75/A55)AHCI / 10 / 1 / 0 RAID‬‬
‫رﻳﻴﺎﻟﺘﻴﻚ رت ل ‪REALTEK RTL 8111F‬‬ ‫ﺷﺒﻜﺔ ﻣﺤﻠﻴﺔ‬
‫‪ 1000 / 100 / 10‬ﻣﻴﺠﺎﺑﺎﻳﺖ ‪ /‬اﻟﺜﺎﻧﻴﺔ ‪ ،‬ﺗﺤﺪﻳﺪ ﺗﻠﻘﺎﺋﻲ ‪ ،‬اﻟﻨﺼﻒ ‪ /‬اﻟﻘﺪرة اﻟﻘﺼﻮى اﻟﻤﺰدوﺟﺔ‬ ‫‪LAN‬‬
‫‪ALC662‬‬
‫اﻟﺘﺮﻣﻴﺰ اﻟﺼﻮﺗﻲ‬
‫‪ 5.1‬ﻗﻨﻮات ﻋﺎﻟﻴﺔ اﻟﺪﻗﺔ‪Biostar Hi-Fi,‬‬
‫ﻳﻪ إم دى ‪FCH AMD A85/A75‬‬
‫ﻣﻨﺎﻓﺬ ‪ 6 x‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ 2 ) 2.0 USB‬ﻓﻲ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ و ‪ 4‬ﻣﻦ ﺧﻼل اﻟﻤﻮزع اﻟﺪاﺧﻠﻲ (‬
‫ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ‬
‫ﻣﻨﺎﻓﺬ ‪ 4 x‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ 2 ) 3.0 USB‬ﻓﻲ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ و ‪ 2‬ﻣﻦ ﺧﻼل اﻟﻤﻮزع اﻟﺪاﺧﻠﻲ (‬
‫ﻋﺎم ‪USB‬‬
‫ﻳﻪ إم دى ‪FCH AMD A55‬‬
‫ﻣﻨﺎﻓﺬ ‪ 8 x‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ 4 ) 2.0 USB‬ﻓﻲ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ و ‪ 4‬ﻣﻦ ﺧﻼل اﻟﻤﻮزع اﻟﺪاﺧﻠﻲ (‬
‫‪ x 1‬ﻓﺘﺤﺔ ﻣﻨﻔﺬ اﻟﻤﻠﺤﻘﺎت اﻹﺿﺎﻓﻴﺔ ‪PCI‬‬
‫‪ x 1‬ﻓﺘﺤﺔ ﻣﻨﻔﺬ اﻟﻤﻠﺤﻘﺎت اﻹﺿﺎﻓﻴﺔ ‪1 x2.0 PCIe‬‬ ‫ﻓﺘﺤﺎت اﻟﺘﻮﺳﻊ‬
‫‪ x 1‬ﻓﺘﺤﺔ ﻣﻨﻔﺬ اﻟﻤﻠﺤﻘﺎت اﻹﺿﺎﻓﻴﺔ ‪16 x2.0 PCIe‬‬
‫‪Hi-Fi A55S3‬‬ ‫‪Hi-Fi A75S3‬‬ ‫‪Hi-Fi A85S3‬‬
‫‪ PS/2 x 1‬اﻟﻔﺎرة‬ ‫‪ PS/2 x 1‬اﻟﻔﺎرة‬ ‫‪ PS/2 x 1‬اﻟﻔﺎرة‬
‫‪ PS/2 x 1‬ﻟﻮﺣﺔ اﻟﻤﻔﺎﺗﻴﺢ ﻟﻠﻜﻤﺒﻴﻮت‬ ‫‪ PS/2 x 1‬ﻟﻮﺣﺔ اﻟﻤﻔﺎﺗﻴﺢ ﻟﻠﻜﻤﺒﻴﻮت‬ ‫‪ PS/2 x 1‬ﻟﻮﺣﺔ اﻟﻤﻔﺎﺗﻴﺢ ﻟﻠﻜﻤﺒﻴﻮت‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 1‬ﻣﻨﻈﻮﻣﺔ اﻟﻌﺮض‬ ‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 1‬ﻣﻨﻈﻮﻣﺔ اﻟﻌﺮض‬ ‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 1‬ﻣﻨﻈﻮﻣﺔ اﻟﻌﺮض‬
‫اﻟﻤﺮﺋﻲ ‪VGA‬‬ ‫اﻟﻤﺮﺋﻲ ‪VGA‬‬ ‫اﻟﻤﺮﺋﻲ ‪VGA‬‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 1‬واﺟﻬﺔ ﻣﺮﺋﻴﺔ رﻗﻤﻴﺔ‬ ‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 1‬واﺟﻬﺔ ﻣﺮﺋﻴﺔ رﻗﻤﻴﺔ‬ ‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 1‬واﺟﻬﺔ ﻣﺮﺋﻴﺔ رﻗﻤﻴﺔ‬ ‫اﻟﻤﺪاﺧﻞ‬
‫‪DVI‬‬ ‫‪DVI‬‬ ‫‪HDMI‬‬ ‫واﻟﻤﺨﺎرج‬
‫ﻓﺘﺤﺔ ﻟﺘﻮﺻﻴﻞ ﻋﺪد ‪ x 1‬اﻟﺸﺒﻜﺔ اﻟﻤﺤﻠﻴﺔ ‪LAN‬‬ ‫ﻓﺘﺤﺔ ﻟﺘﻮﺻﻴﻞ ﻋﺪد ‪ x 1‬اﻟﺸﺒﻜﺔ اﻟﻤﺤﻠﻴﺔ ‪LAN‬‬ ‫ﻓﺘﺤﺔ ﻟﺘﻮﺻﻴﻞ ﻋﺪد ‪ x 1‬اﻟﺸﺒﻜﺔ اﻟﻤﺤﻠﻴﺔ ‪LAN‬‬ ‫اﻟﺨﻠﻔﻴﺔ‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 4‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم‬ ‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 2‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم‬ ‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 2‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم‬
‫‪2.0 USB‬‬ ‫‪2.0 USB‬‬ ‫‪2.0 USB‬‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 3‬ﺟﺎك ﻟﻠﺼﻮت‬ ‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 2‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم‬ ‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 2‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم‬
‫‪3.0 USB‬‬ ‫‪3.0 USB‬‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 3‬ﺟﺎك ﻟﻠﺼﻮت‬ ‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 3‬ﺟﺎك ﻟﻠﺼﻮت‬

‫‪36‬‬

‫‪Downloaded from www.Manualslib.com manuals search engine‬‬

 ‫‪Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫‪Hi-Fi A55S3‬‬ ‫‪Hi-Fi A75S3‬‬ ‫‪Hi-Fi A85S3‬‬
‫وﺻﻠﺔ ‪ 3 x SATA 6‬ﺟﻴﺠﺎﺑﺎﻳﺖ ‪/‬‬ ‫وﺻﻠﺔ ‪ 6 x SATA 6‬ﺟﻴﺠﺎﺑﺎﻳﺖ ‪/‬‬ ‫وﺻﻠﺔ ‪ 6 x SATA 6‬ﺟﻴﺠﺎﺑﺎﻳﺖ ‪/‬‬
‫اﻟﺜﺎﻧﻴﺔ‬ ‫اﻟﺜﺎﻧﻴﺔ‬ ‫اﻟﺜﺎﻧﻴﺔ‬
‫ﻣﻮزع ‪ x2‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪USB‬‬ ‫ﻣﻮزع ‪ x2‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪USB‬‬ ‫ﻣﻮزع ‪ x2‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪USB‬‬
‫‪2.0‬‬ ‫‪2.0‬‬ ‫‪2.0‬‬
‫ﻣﻮﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 4 x 1‬دﺑﺎﺑﻴﺲ‬ ‫ﻣﻮزع ‪ x1‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪USB‬‬ ‫ﻣﻮزع ‪ x1‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪USB‬‬
‫وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 24 x1‬دﺑﻮس‬ ‫‪3.0‬‬ ‫‪3.0‬‬
‫وﺻﻠﺔ ‪ x 1‬ﻣﺮوﺣﺔ ﺗﺒﺮﻳﺪ وﺣﺪة‬ ‫ﻣﻮﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 4 x 1‬دﺑﺎﺑﻴﺲ‬ ‫ﻣﻮﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 4 x 1‬دﺑﺎﺑﻴﺲ‬ ‫اﻟﻤﺪاﺧﻞ‬
‫اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬ ‫وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 24 x1‬دﺑﻮس‬ ‫وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 24 x1‬دﺑﻮس‬ ‫واﻟﻤﺨﺎرج‬
‫وﺻﻠﺔ ‪ x1‬ﻣﺮاوح ﺗﺒﺮﻳﺪ اﻟﻤﻨﻈﻮﻣﺔ‬ ‫وﺻﻠﺔ ‪ x 1‬ﻣﺮوﺣﺔ ﺗﺒﺮﻳﺪ وﺣﺪة‬ ‫وﺻﻠﺔ ‪ x 1‬ﻣﺮوﺣﺔ ﺗﺒﺮﻳﺪ وﺣﺪة‬ ‫اﻟﺪاﺧﻠﻴﺔ‬
‫ﻣﻮزع ‪ x 1‬اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬ ‫اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬ ‫اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫ﻣﻮزع ‪ x1‬اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬ ‫وﺻﻠﺔ ‪ x1‬ﻣﺮاوح ﺗﺒﺮﻳﺪ اﻟﻤﻨﻈﻮﻣﺔ‬ ‫وﺻﻠﺔ ‪ x1‬ﻣﺮاوح ﺗﺒﺮﻳﺪ اﻟﻤﻨﻈﻮﻣﺔ‬
‫ﻣﻮزع ‪ x1‬ﺳﻴﻤﻮس ﻣﺒﺎﺷﺮ‬ ‫ﻣﻮزع ‪ x 1‬اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬ ‫ﻣﻮزع ‪ x 1‬اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻣﻮزع ‪ x1‬ﻓﺘﺤﺔ ﻟﻠﻄﺎﺑﻌﺔ‬ ‫ﻣﻮزع ‪ x1‬اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬ ‫ﻣﻮزع ‪ x1‬اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫ﻣﻮزع ‪ x1‬ﻓﺘﺤﺔ ﺗﺴﻠﺴﻠﻴﺔ‬ ‫ﻣﻮزع ‪ x1‬ﺳﻴﻤﻮس ﻣﺒﺎﺷﺮ‬ ‫ﻣﻮزع ‪ x1‬ﺳﻴﻤﻮس ﻣﺒﺎﺷﺮ‬
‫ﻣﻮزع ‪ x1‬ﻓﺘﺤﺔ ﻟﻠﻄﺎﺑﻌﺔ‬ ‫ﻣﻮزع ‪ x1‬ﻓﺘﺤﺔ ﻟﻠﻄﺎﺑﻌﺔ‬
‫ﻣﻮزع ‪ x1‬ﻓﺘﺤﺔ ﺗﺴﻠﺴﻠﻴﺔ‬ ‫ﻣﻮزع ‪ x1‬ﻓﺘﺤﺔ ﺗﺴﻠﺴﻠﻴﺔ‬
‫ﻋﺎﻣﻞ ﺷﻜﻞ ﻣﺪد اﻟﺘﻜﻨﻮﻟﻮﺟﻴﺎ اﻟﻤﺘﻘﺪﻣﺔ ‪ 244 ، microATX‬ﻣﻢ ‪ 191 x‬ﻣﻢ‬ ‫ﻋﺎﻣﻞ اﻟﺸﻜﻞ‬
‫وﻳﻨﺪوز إآﺲ ﺑﻲ ‪ / windows xp‬وﻳﻨﺪوز ﻓﻴﺴﺘﺎ ‪ /‬وﻳﻨﺪوز ‪ / 7‬وﻳﻨﺪوز ‪8‬‬ ‫أﻧﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫ﺑﻴﻮﺳﺘﺎر ‪ BIOSTAR‬ﺗﺤﺘﻔﻆ ﺑﺤﻖ إﺿﺎﻓﺔ أو أزﻟﺔ اﻟﺪﻋﻢ ﻷي ﻧﻈﺎم ﺗﺸﻐﻴﻞ ﻣﻊ أو ﺑﺪون أﻧﻈﺎر‪.‬‬ ‫اﻟﻤﺪﻋﻮﻣﺔ‬

‫‪37‬‬

‫‪Downloaded from www.Manualslib.com manuals search engine‬‬

 Motherboard Manual

French
Spécifications
Interface de connexion FM2 pour série A AMD processeur
Support Unité Enveloppe thermique Unité Centrale maximum : 100Watt
Centrale * Veuillez vous reporter à www.biostar.com.tw pour la liste des supports modèles
d'Unité Centrale.
AMD A85 FCH (Hi-Fi A85S3)
Jeu de puces AMD A75 FCH (Hi-Fi A75S3)
AMD A55 FCH (Hi-Fi A55S3)
Supporte mémoire DDR3 double canal 800/ 1066/ 1333/ 1600/ 1866
Banc de mémoire 2 x DDR3 DIMM, Supporte max. jusqu’à une mémoire de 32 GB
Mémoire Chaque module DIMM supporte module DDR3 non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB
* Veuillez vous reporter à www.biostar.com.tw pour la liste des soutien de la
mémoire.
AMD A85/A75/A55 FCH
Stockage Supporte système RAID 0,1,10, 5 & AHCI (A85 FCH)
Supporte système RAID 0,1,10 & AHCI (A75/A55 FCH)
Realtek RTL 8111F
Réseau local 10/ 100/ 1000 Mb/s auto négociation, capacité bidirectionnelle à l'alternat /
bidirectionnelle simultanée
ALC662
Codec audio
Canaux 5.1, écoute audio de haute définition, Biostar Hi-Fi
AMD A85/A75 FCH
Port 6x USB 2.0 (2 sur les I/O arrières et 4 en interne)
USB Port 4x USB 3.0 (2 sur les I/O arrières et 2 en interne)
AMD A55 FCH
Port 8x USB 2.0 (4 sur les I/O arrières et 4 en interne)
1x Fente PCI
Connecteur
1x PCIe 2.0 x1 Fente
d’extension
1x PCIe 2.0 x16 Fente
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
1x PS/2 Clavier 1x PS/2 Clavier 1x PS/2 Clavier
1x PS/2 Souris 1x PS/2 Souris 1x PS/2 Souris
1x Port VGA 1x Port VGA 1x Port VGA
1x Port HDMI 1x Port DVI 1x Port DVI
I/O arrirèes
1x port LAN 1x port LAN 1x port LAN
2x Port USB 2.0 2x Port USB 2.0 4x Port USB 2.0
2x Port USB 3.0 2x Port USB 3.0 3x entrées audio
3x entrées audio 3x entrées audio

38

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
Spécifications
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
6x Connecteur SATA 6.0Gb/s 6x Connecteur SATA 6.0Gb/s 6x Connecteur SATA 3.0Gb/s
2x embases USB 2.0 2x embases USB 2.0 2x embases USB 2.0
1x embases USB 3.0 1x embases USB 3.0 1x 4-Broche de carte
1x 4-Broche de carte 1x 4-Broche de carte 1x 24-Broche de carte
1x 24-Broche de carte 1x 24-Broche de carte 1x Connecteur ventilateur unité
1x Connecteur ventilateur unité 1x Connecteur ventilateur unité centrale
centrale centrale 1x Connecteur ventilateur
I/O en interne
1x Connecteur ventilateur 1x Connecteur ventilateur système
système système 1x Fiche panneau avant
1x Fiche panneau avant 1x Fiche panneau avant 1x Fiche audio avant
1x Fiche audio avant 1x Fiche audio avant 1x Fiche mémoire CMOS vide
1x Fiche mémoire CMOS vide 1x Fiche mémoire CMOS vide 1x Embase port imprimante
1x Embase port imprimante 1x Embase port imprimante 1x Embase port série
1x Embase port série 1x Embase port série
Facteur
Facteur d'encombrement microATX, 244 mm x 191 mm
d'encombrement
Windows XP / Vista / 7/ 8
Support SE Biostar se réserve le droit d’ajouter ou d'enlever le support pour toute SE avec ou sans
préavis.

39

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

German
Spezifikationen
Anschluss-FM2 für AMD A-Serie Prozessor
CPU-Unterstütz
Maximale CPU TDP (Thermal Design Power): 100 Watt
ung
* Bitte konsultieren Sie www.biostar.com.tw für CPU-Unterstützungsliste
AMD A85 FCH (Hi-Fi A85S3)
Chipset AMD A75 FCH (Hi-Fi A75S3)
AMD A55 FCH (Hi-Fi A55S3)
Unterstützt zweikanaliges DDR3 800/ 1066/ 1333/ 1600/ 1866

Festplattenspeic 2 x DDR3 DIMM-SpeicherSlot, Max. Uterstützung bis zu 32 GB-Speicher

her Jedes DIMM unterstützt nicht-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3-Module
* Bitte konsultieren Sie www.biostar.com.tw für für Speicherunterstützung Liste.
AMD A85/A75/A55 FCH
Arbeitsspeicher Unterstützt RAID 0,1,10, 5 & AHCI (A85 FCH)
Unterstützt RAID 0,1,10 & AHCI (A75/A55 FCH)
Realtek RTL 8111F
LAN
10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig
ALC662
Audio-Codec
5.1 Kanäle, HD-Audio, Biostar Hi-Fi
AMD A85/A75 FCH:
6x USB 2.0-Port (2 hintere I/Os und 4 via interne Header)
USB 4x USB 3.0-Port (2 hintere I/Os und 2 via interne Header)
AMD A55 FCH:
8x USB 2.0-Port (4 hintere I/Os und 4 via interne Header)
1x PCI-Slot
Erweiterungsan
1x PCIe 2.0 x1-Slot
schlüsse
1x PCIe 2.0 x16-Slot
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
1x PS/2-Maus 1x PS/2-Maus 1x PS/2-Maus
1x PS/2-Keyboard 1x PS/2-Keyboard 1x PS/2-Keyboard
1x VGA-Port 1x VGA-Port 1x VGA-Port
Hintere I/Os 1x HDMI -Port 1x DVI-Port 1x DVI-Port
1x LAN-Port 1x LAN-Port 1x LAN-Port
2x USB 2.0-Port 2x USB 2.0-Port 4x USB 2.0-Port
2x USB 3.0-Port 2x USB 3.0-Port 3x Audio Jack
3x Audio Jack 3x Audio Jack

40

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
Spezifikationen
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
6x SATA 6.0Gb/s-Verbinung 6x SATA 6.0Gb/s-Verbinung 6x SATA 3.0Gb/s-Verbinung
2x USB 2.0-Header 2x USB 2.0-Header 2x USB 2.0-Header
1x USB 3.0-Header 1x USB 3.0-Header 1x 4-Pin-Stromverbindung
1x 4-Pin-Stromverbindung 1x 4-Pin-Stromverbindung 1x 24-Pin-Stromverbindung
1x 24-Pin-Stromverbindung 1x 24-Pin-Stromverbindung 1x CPU-Ventilatorverbindung
Interne I/Os 1x CPU-Ventilatorverbindung 1x CPU-Ventilatorverbindung 1x System-Ventilatorverbindung
1x System-Ventilatorverbindung 1x System-Ventilatorverbindung 1x Header für Frontpanel
1x Header für Frontpanel 1x Header für Frontpanel 1x Header für Frontaudio
1x Header für Frontaudio 1x Header für Frontaudio 1x Header für klares CMOS
1x Header für klares CMOS 1x Header für klares CMOS 1x Header für Druckerport
1x Header für Druckerport 1x Header für Druckerport 1x Serieller Port-Header
1x Serieller Port-Header 1x Serieller Port-Header
Formfaktor microATX Formfaktor, 244 mm x 191 mm

OS-Unterstützu Windows XP / Vista / 7/ 8

ng Biostar reserves the right to add or remove support for any OS with or without notice.

41

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

Italian
Specificazioni
Slot FM2 per processore AMD serie-A
Supporto Alimentazione di Proiezione Termico (TDP – Thermal Design Power): 100Watt
processore * Si prega di consultare www.biostar.com.tw per la lista di supporto del
processore.
AMD A85 FCH (Hi-Fi A85S3)
Tipo scheda AMD A75 FCH (Hi-Fi A75S3)
AMD A55 FCH (Hi-Fi A55S3)
Supporta DDR3 800/ 1066/ 1333/ 1600/ 1866 Doppio Canale
2 x DDR3 DIMM Slot di Memoria Supporta fino a 32 GB Memoria
Memoria
Ogni DIMM supporta non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 moduli
* Si prega di consultare www.biostar.com.tw per la lista di supporto del memoria.
AMD A85/A75/A55 FCH
Memorizzazione Supporta RAID 0,1,10, 5 & AHCI (A85 FCH)
Supporta RAID 0,1,10 & AHCI (A75/A55 FCH)
Realtek RTL 8111F
Catena
10/ 100/ 1000 Mb auto negoziazione, capacita di duplex Meta / Completo
ALC662
Codec Audio
Canali Audio di Alta Definizione 5.1, Biostar Hi-Fi
Piattaforma AMD A85/A75 FCH:
Slot 6x USB 2.0 (2 nei ingressi/ uscite posteriore e 4 da distributori interni)
USB Slot 4x USB 3.0 (2 nei ingressi/ uscite posteriore e 2 da distributori interni)
Piattaforma AMD A55 FCH:
Slot 8x USB 2.0 (4 nei ingressi/ uscite posteriore e 4 da distributori interni)
Slot 1x PCI
Slot di espansione Slot 1x PCIe 2.0 x1
Slot 1x PCIe 2.0 x16
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
Mouse 1x PS/2 Mouse 1x PS/2 Mouse 1x PS/2
Tastiera 1x PS/2 Tastiera 1x PS/2 Tastiera 1x PS/2
Slot 1x VGA Slot 1x VGA Slot 1x VGA
Ingressi/ Uscite
Slot 1x HDMI Slot 1x DVI Slot 1x DVI
Posteriore
Slot 1x LAN Slot 1x LAN Slot 1x LAN
Slot 2x USB 2.0 Slot 2x USB 2.0 Slot 4x USB 2.0
Slot 2x USB 3.0 Slot 2x USB 3.0 Jack audio 3x
Jack audio 3x Jack audio 3x

42

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
Specificazioni
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
Connettore 6x SATA 6.0Gb/s Connettore 6x SATA 6.0Gb/s Connettore 6x SATA 3.0Gb/s
Distributore 2x USB 2.0 Distributore 2x USB 2.0 Distributore 2x USB 2.0
Distributore 1x USB 3.0 Distributore 1x USB 3.0 Connettore con 4 pin x1
Connettore con 4 pin x1 Connettore con 4 pin x1 Connettore con 24 pin x1
Connettore con 24 pin x1 Connettore con 24 pin x1 Connettore Ventilatore
Connettore Ventilatore Connettore Ventilatore processore x1
Ingressi/ Uscite processore x1 processore x1 Connettore Ventilatore
Interni Connettore Ventilatore Connettore Ventilatore Sistema x1
Sistema x1 Sistema x1 Distributore Pannello Frontale
Distributore Pannello Frontale Distributore Pannello Frontale x1
x1 x1 Distributore Audio Frontale x1
Distributore Audio Frontale x1 Distributore Audio Frontale x1 Distributore CMOS Diretto x1
Distributore CMOS Diretto x1 Distributore CMOS Diretto x1 Distributore Slot Stampante x1
Distributore Slot Stampante x1 Distributore Slot Stampante x1 Distributore Slot Serie x1
Distributore Slot Serie x1 Distributore Slot Serie x1
Fattore di Forma Fattore di Forma microATX, 244 mm x 191 mm
Windows XP / Vista / 7/ 8
Supporto SO Biostar si riserva il diritto di aggiungere o ritirare il supporto per qualsiasi SO con o
senza preavviso.

43

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

Japanese
仕様
AMD A-シリーズ プロセッサの Socket FM2
CPU サポート 最大 CPU TDP （Thermal Design Power 最大放熱量）:100 W
*CPU サポート リストについては、www.biostar.com.twを参照してください。
AMD A85 FCH (Hi-Fi A85S3)
チップセット AMD A75 FCH (Hi-Fi A75S3)
AMD A55 FCH (Hi-Fi A55S3)
デュアルチャンネル DDR3 800/ 1066/ 1333/ 1600/ 1866 をサポート
2 x DDR3 DIMM メモリ スロット、 最大 32 GB メモリまでサポート
各 DIMM は、 非-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 モジュールをサポートしてい
メモリ
ます
*サポートされているメモリのリストについては、www.biostar.com.twを参照してく
ださい。
AMD A85/A75/A55 FCH
保存スペース RAID 0,1,10, 5 & AHCI のサポート (A85 FCH)
RAID 0,1,10 & AHCI のサポート (A75/A55 FCH)
Realtek RTL 8111F
LAN
10/ 100/ 1000 Mb/s オートネゴーシエーション、半/全 二重通信

オーディオ コーデ ALC662

ック 5.1 チャンネル, ハイ デフィニション オーディオ, Biostar Hi-Fi
AMD A85/A75 FCH:
6x USB 2.0 ポート (後部 I/O に2つ 及び 内蔵ヘッダー経由に4つ)
USB 4x USB 3.0 ポート (後部 I/O に2つ 及び 内蔵ヘッダー経由に2つ)
AMD A55 FCH:
8x USB 2.0 ポート (後部 I/O に4つ 及び 内蔵ヘッダー経由に4つ)
1x PCI スロット
拡張スロット 1x PCIe 2.0 x1 スロット
1x PCIe 2.0 x16 スロット
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
1x PS/2 キーボード 1x PS/2 キーボード 1x PS/2 キーボード
1x PS/2 マウス 1x PS/2 マウス 1x PS/2 マウス
1x VGA ポート 1x VGA ポート 1x VGA ポート
後部 I/O 1x HDMI ポート 1x DVI ポート 1x DVI ポート
1x LAN ポート 1x LAN ポート 1x LAN ポート
2x USB 2.0 ポート 2x USB 2.0 ポート 4x USB 2.0 ポート
2x USB 3.0 ポート 2x USB 3.0 ポート 3x オーディオ ジャック
3x オーディオ ジャック 3x オーディオ ジャック

44

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
仕様
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
6x SATA 6.0Gb/s コネクタ 6x SATA 6.0Gb/s コネクタ 6x SATA 3.0Gb/s コネクタ
2x USB 2.0 ヘッダー 2x USB 2.0 ヘッダー 2x USB 2.0 ヘッダー
1x USB 3.0 ヘッダー 1x USB 3.0 ヘッダー 1x 4-Pin パワー コネクタ
1x 4-Pin パワー コネクタ 1x 4-Pin パワー コネクタ 1x 24-Pin パワー コネクタ
1x 24-Pin パワー コネクタ 1x 24-Pin パワー コネクタ 1x CPU ファン コネクタ
1x CPU ファン コネクタ 1x CPU ファン コネクタ 2x システム ファン コネクタ
内蔵 I/O 1x システム ファン コネクタ 1x システム ファン コネクタ 1x フロント パネル ヘッダー
1x フロント パネル ヘッダー 1x フロント パネル ヘッダー 1x フロント オーディオ ヘッ
1x フロント オーディオ ヘッ 1x フロント オーディオ ヘッ ダー
ダー ダー 1x クリア CMOS ヘッダー
1x クリア CMOS ヘッダー 1x クリア CMOS ヘッダー 1x プリンター ポート ヘッダ
1x プリンター ポート ヘッダ 1x プリンター ポート ヘッダ ー
ー ー 1x シリアル ポート ヘッダー
1x シリアル ポート ヘッダー 1x シリアル ポート ヘッダー
フォーム ファクタ microATX フォーム ファクタ、244 mm x 191 mm
Windows XP / Vista / 7/ 8
サポート OS
Biostar には、通知なしでサポート OS を変更する権限があります。

45

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

Polish
Specyfikacje techniczne
Gniazdo procesora (Socket) FM2 dla procesorów AMD seria-A
Moc Wydzielanego Ciepła (TDP - Thermal Design Power): 100Watt
Obsługa procesora
* Proszę sprawdzić listę obsługiwanych procesorów na stronie internetowej
www.biostar.com.tw
AMD A85 FCH (Hi-Fi A85S3)
Rodzaj płyty AMD A75 FCH (Hi-Fi A75S3)
AMD A55 FCH (Hi-Fi A55S3)
Obsługa pamięci DDR3 800/ 1066/ 1333/ 1600/ 1866 Dwukanałowa
2 x DDR3 DIMM Pamięć Gniazda procesora (Slot), Maksymalna wielkość pamięci 32
GB
Pamięć
Każdy DIMM obsługuje jeden moduł non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3
* Proszę sprawdzić listę obsługiwanych pamięć na stronie internetowej
www.biostar.com.tw
AMD A85/A75/A55 FCH
Przechowywanie Obsługa RAID 0,1,10, 5 & AHCI (A85 FCH)
Obsługa RAID 0,1,10 & AHCI (A75/A55 FCH)
Układ RTL 8111F
LAN
10/ 100/ 1000 Mb auto negocjacja, pojemność dupleks Połowe / Pełny
ALC662
Codec Audio
Kanały Audio wysokiej Definicji 5.1, Biostar Hi-Fi
Płyta AMD A85/A75 FCH:
6 x złącza USB 2.0 (2 przez tylne porty wejścia/ wyjścia oraz 4 przez wewnętrzne porty)
USB 4 x złącza USB 3.0 (2 przez tylne porty wejścia/ wyjścia oraz 2 przez wewnętrzne porty)
Płyta AMD A55 FCH:
8 x złącza USB 2.0 (4 przez tylne porty wejścia/ wyjścia oraz 4 przez wewnętrzne porty)
złącza 1x PCI (Slot)
Złącza rozszerzeń złącza 1x PCIe 2.0 x1 (Slot)
złącza 1x PCIe 2.0 x16 (Slot)
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
Myszka 1x PS/2 Myszka 1x PS/2 Myszka 1x PS/2
Klawiatura 1x PS/2 Klawiatura 1x PS/2 Klawiatura 1x PS/2
Port 1x VGA Port 1x VGA Port 1x VGA
Tylne porty wejścia/
Port 1x HDMI Port 1x DVI Port 1x DVI
wyjścia
Port 1x LAN Port 1x LAN Port 1x LAN
Porty 2x USB 2.0 Porty 2x USB 2.0 Porty 4x USB 2.0
Porty 2x USB 3.0 Porty 2x USB 3.0 Porty audio 3x
Porty audio 3x Porty audio 3x

46

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
Specyfikacje techniczne
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
Złącza 6x SATA 6.0Gb/s Złącza 6x SATA 6.0Gb/s Złącza 6x SATA3.0Gb/s
Złącza 2x USB 2.0 Złącza 2x USB 2.0 Złącza 2x USB 2.0
Złącza 1x USB 3.0 Złącza 1x USB 3.0 Złącza 4 pionowe x 1
Złącza 4 pionowe x 1 Złącza 4 pionowe x 1 Złącza 24 pionowe x 1
Złącza 24 pionowe x 1 Złącza 24 pionowe x 1 Złącze wentylatora CPU x 1
Złącze wentylatora CPU x 1 Złącze wentylatora CPU x 1 Złącze wentylatora obudowy x
Wewnętrzne porty
Złącze wentylatora obudowy x Złącze wentylatora obudowy x 1
wejścia/ wyjścia 1 1 Złącze przedniego panelu x1
Złącze przedniego panelu x1 Złącze przedniego panelu x1 Złącze audio przedniego
Złącze audio przedniego Złącze audio przedniego panelu x1
panelu x1 panelu x1 Złącze bezpośrednie CMOS
Złącze bezpośrednie CMOS Złącze bezpośrednie CMOS x1
x1 x1 Złącze port drukarki x1
Złącze port drukarki x1 Złącze port drukarki x1 Port szeregowy x1
Port szeregowy x1 Port szeregowy x1
Obudowa Obudowa microATX, 244 mm x 191 mm
Windows XP / Vista / 7/ 8
Obsługa OS Biostar zastrzega sobie prawo do dodania lub wycofania obsługi dla OS, z
wypowiedzeniem lub bez wypowiedzenia.

47

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

Portuguese
Especificações
Porta FM2 para processador AMD série-A
Suporte Alimentação de Design Térmico (TDP – Thermal Design Power): 100Watt
Processador * Por favor consulte www.biostar.com.tw para obter uma lista de suporte do
processador.
AMD A85 FCH (Hi-Fi A85S3)
Tipo Placa Mãe AMD A75 FCH (Hi-Fi A75S3)
AMD A55 FCH (Hi-Fi A55S3)
Suporta DDR3 800/ 1066/ 1333/ 1600/ 1866 Canal Duplo
2 x DDR3 DIMM Slot de memória Suporta até 32 GB Memória
Memória
Cada DIMM suporta non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 módulo
* Por favor consulte www.biostar.com.tw para obter uma lista de suporte do memória.
AMD A85/A75/A55 FCH
Armazenamento Suporta RAID 0,1,10, 5 & AHCI (A85 FCH)
Suporta RAID 0,1,10 & AHCI (A75/A55 FCH)
Realtek RTL 8111F
LAN
10/ 100/ 1000 Mb auto negociação, capacidade duplex Metade / Cheio
ALC662
Codec de Audio
Canais de Áudio de Alta Definição 5.1, Biostar Hi-Fi
Plataforma AMD A85/A75 FCH:
Porta 6x USB 2.0 (2 nas entradas/saídas traseiras e 4 pelos Dispositivos internos)
USB Porta 4x USB 3.0 (2 nas entradas/saídas traseiras e 2 pelos Dispositivos internos)
Plataforma AMD A55 FCH:
Porta 8x USB 2.0 (4 nas entradas/saídas traseiras e 4 pelos Dispositivos internos)
Porta 1x PCI
Slots de
Porta 1x PCIe 2.0 x1
expansão
Porta 1x PCIe 2.0 x16
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
Mouse 1x PS/2 Mouse 1x PS/2 Mouse 1x PS/2
Teclado 1x PS/2 Teclado 1x PS/2 Teclado 1x PS/2

Entradas/Saída Porta 1x VGA Porta 1x VGA Porta 1x VGA

s no painel Porta 1x HDMI Porta 1x DVI Porta 1x DVI
traseiro Porta 1x LAN Porta 1x LAN Porta 1x LAN
Porta 2x USB 2.0 Porta 2x USB 2.0 Porta 4x USB 2.0
Porta 2x USB 3.0 Porta 2x USB 3.0 Soquete audio 3x
Soquete audio 3x Soquete audio 3x

48

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
Especificações
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
Conector 6x SATA 6.0Gb/s Conector 6x SATA 6.0Gb/s Conector 6x SATA 3.0Gb/s
Dispositivo 2x USB 2.0 Dispositivo 2x USB 2.0 Dispositivo 2x USB 2.0
Dispositivo 1x USB 3.0 Dispositivo 1x USB 3.0 Conector de 4 pinos x1
Conector de 4 pinos x1 Conector de 4 pinos x1 Conector de 24 pinos x1
Conector de 24 pinos x1 Conector de 24 pinos x1 Conector de Ventoinha
Conector de Ventoinha Conector de Ventoinha processador x1
Conectores na
processador x1 processador x1 Conector de Ventoinha Sistema
placa
Conector de Ventoinha Sistema Conector de Ventoinha Sistema x1
x1 x1 Dispositivo Painel Frontal x1
Dispositivo Painel Frontal x1 Dispositivo Painel Frontal x1 Dispositivo de Audio Frontal x1
Dispositivo de Audio Frontal x1 Dispositivo de Audio Frontal x1 Dispositivo CMOS Direct x1
Dispositivo CMOS Direct x1 Dispositivo CMOS Direct x1 Dispositivo Porta Impressora x1
Dispositivo Porta Impressora x1 Dispositivo Porta Impressora x1 Dispositivo Porta Série x1
Dispositivo Porta Série x1 Dispositivo Porta Série x1
Fator de Fôrma Fator de Fôrma microATX, 244 mm x 191 mm
Windows XP / Vista / 7/ 8
Suporte OS Biostar reserva seu direito de adicionar ou retirar o suporte para qualquer OS com ou
sem notificação.

49

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

Russian
Спецификации
Поддержка Сокет FM2 для процессоров AMD серии A
центрального Максимальный термопакет центрального процессора (TDP): 100 ватт
процессора * Перечень поддержки центрального процессора смотрите на www.biostar.com.tw.
AMD A85 FCH (Hi-Fi A85S3)
Набор
AMD A75 FCH (Hi-Fi A75S3)
микросхем
AMD A55 FCH (Hi-Fi A55S3)
Поддерживает двухканальный DDR3 800/ 1066/ 1333/ 1600/ 1866
2 гнезда платы памяти DDR3 DIMM, максимальная память до 32 Гб
Память
Каждый модуль DIMM поддерживает модуль не-ECC 512 Мб/ 1/ 2/ 4/ 8/ 16 Гб DDR3
* Перечень поддержки памяти смотрите на www.biostar.com.tw.
AMD A85/A75/A55 FCH
Накопитель Поддерживает RAID 0,1,10, 5 & AHCI (A85 FCH)
Поддерживает RAID 0,1,10 & AHCI (A75/A55 FCH)
Realtek RTL 8111F
Локальная сеть
Автосогласование 10/ 100/ 1000 Мб/с, работает в полно/полудуплексном режиме
ALC662
Аудиокодек
Каналы 5.1, высококачественное аудио, Biostar Hi-Fi
AMD A85/A75 FCH:
6 портов USB 2.0 (2 сзади ввода-вывода и 4 через внутренние контакты)
USB 4 портов USB 3.0 (2 сзади ввода-вывода и 2 через внутренние контакты)
AMD A55 FCH:
8 портов USB 2.0 (4 сзади ввода-вывода и 4 через внутренние контакты)
1x гнезда PCI
Гнезда расшир. 1x PCIe 2.0 x1 гнездо
1x PCIe 2.0 x16 гнездо
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
1 мышь PS/2 1 мышь PS/2 1 мышь PS/2
1 клавиатура PS/2 1 клавиатура PS/2 1 клавиатура PS/2
1 порт VGA 1 порт VGA 1 порт VGA
Задняя плата 1 порт HDMI 1 порт DVI 1 порт DVI
ввода-вывода 1 порт локальной сети 1 порт локальной сети 1 порт локальной сети
2 порта USB 2.0 2 порта USB 2.0 4 порта USB 2.0
2 порта USB 3.0 2 порта USB 3.0 3 гнезд для подключения
3 гнезд для подключения 3 гнезд для подключения наушников
наушников наушников

50

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
Спецификации
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
Соединитель 6x SATA 6 Гб/с Соединитель 6x SATA 6 Гб/с Соединитель 6x SATA 3 Гб/с
2 контакта USB 2.0 2 контакта USB 2.0 2 контакта USB 2.0
1 контакта USB 3.0 1 контакта USB 3.0 1 4-выводный разъем питания
1 4-выводный разъем питания 1 4-выводный разъем питания 1 24-выводный разъем
1 24-выводный разъем 1 24-выводный разъем питания
питания питания 1 разъем вентилятора ЦП
1 разъем вентилятора ЦП 1 разъем вентилятора ЦП 1 разъема вентилятора
1 разъема вентилятора 1 разъема вентилятора системы
Внутр. Плата системы системы 1 контакт передней панели
ввода-вывода
1 контакт передней панели 1 контакт передней панели 1 контакт передней
1 контакт передней 1 контакт передней аудиопанели
аудиопанели аудиопанели 1 контакт микросхемы Clear
1 контакт микросхемы Clear 1 контакт микросхемы Clear CMOS
CMOS CMOS 1 контакт порта принтера
1 контакт порта принтера 1 контакт порта принтера 1 инфракрасный
1 инфракрасный 1 инфракрасный пользовательский контакт
пользовательский контакт пользовательский контакт 1 контакт последовательного
1 контакт последовательного 1 контакт последовательного порта
порта порта
Конструктив Форм-фактор microATX, 244 мм x 191 мм
Windows XP / Vista / 7/ 8
Поддержка ОС Biostar оставляет за собой право добавлять или удалять поддержку любой ОС, с
уведомлением или без.

51

Downloaded from www.Manualslib.com manuals search engine

 Motherboard Manual

Spanish
Especificaciones
Ranura FM2 para procesador AMD serie - A
Compatibilidad
Alimentación de Proyección Térmica (TDP – Thermal Design Power): 100Watt
con el
procesador *Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el
procesador.
AMD A85 FCH (Hi-Fi A85S3)
Tipo de Placa AMD A75 FCH (Hi-Fi A75S3)
AMD A55 FCH (Hi-Fi A55S3)
Soporta DDR3 800/ 1066/ 1333/ 1600/ 1866 Doble Canal
2x DDR3 DIMM Ranura de memoria Soporta hasta 32 GB Memoria
Memoria Cada DIMM soporta un modulo non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3
*Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el
memoria.
AMD A85/A75/A55 FCH
Almacenamiento
Soporta RAID 0,1,10, 5 & AHCI (A85 FCH)
de información
Soporta RAID 0,1,10 & AHCI (A75/A55 FCH)
Realtek RTL 8111F
LAN
10/ 100/ 1000 Mb/s auto negociación, capacidad dúplex Mitad/Completo
ALC662
Códec Audio
Canales Audio de Alta Definición 5.1, Biostar Hi-Fi
Plataforma AMD A85/A75 FCH:
Ranura 6x USB 2.0 (2 en las entradas/salidas posteriores y 4 por los distribuidores internos)
USB Ranura 4x USB 3.0 (2 en las entradas/salidas posteriores y 2 por los distribuidores internos)
Plataforma AMD A55 FCH:
Ranura 8x USB 2.0 (4 en las entradas/salidas posteriores y 4 por los distribuidores internos)
Ranura 1x PCI
Ranuras de
Ranura 1x PCIe 2.0 x1
Extinción
Ranura 1x PCIe 2.0 x16
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
Ratón 1x PS/2 Ratón 1x PS/2 Ratón 1x PS/2
Teclado 1x PS/2 Teclado 1x PS/2 Teclado 1x PS/2
Ranura 1x VGA Ranura 1x VGA Ranura 1x VGA
Panel trasero de
Ranura 1x HDMI Ranura 1x DVI Ranura 1x DVI
E/S
Ranura 1x LAN Ranura 1x LAN Ranura 1x LAN
Ranura 2x USB 2.0 Ranura 2x USB 2.0 Ranura 4x USB 2.0
Ranura 2x USB 3.0 Ranura 2x USB 3.0 Socket audio 3x
Socket audio 3x Socket audio 3x

52

Downloaded from www.Manualslib.com manuals search engine

 Hi-Fi A85S3/Hi-Fi A75S3/Hi-Fi A55S3
Especificaciones
Hi-Fi A85S3: Hi-Fi A75S3: Hi-Fi A55S3:
Conector 6x SATA 6Gb’s Conector 6x SATA 6Gb’s Conector 6x SATA 3Gb’s
Distribuidor 2x USB 2.0 Distribuidor 2x USB 2.0 Distribuidor 2x USB 2.0
Distribuidor 1x USB 3.0 Distribuidor 1x USB 3.0 Conector con 4 patillas x1
Conector con 4 patillas x1 Conector con 4 patillas x1 Conector con 24 patillas x1
Conector con 24 patillas x1 Conector con 24 patillas x1 Conector Ventilador procesador
Conector Ventilador procesador Conector Ventilador procesador x1
Conectores en
x1 x1 Conector Ventilador Sistema x2
placa
Conector Ventilador Sistema x2 Conector Ventilador Sistema x2 Distribuidor Panel Frontal x1
Distribuidor Panel Frontal x1 Distribuidor Panel Frontal x1 Distribuidor Audio Frontal x1
Distribuidor Audio Frontal x1 Distribuidor Audio Frontal x1 Distribuidor CMOS Directo x1
Distribuidor CMOS Directo x1 Distribuidor CMOS Directo x1 Distribuidor Ranura Impresora
Distribuidor Ranura Impresora Distribuidor Ranura Impresora x1
x1 x1 Distribuidor Ranura Serie x1
Distribuidor Ranura Serie x1 Distribuidor Ranura Serie x1
Factor de Forma Factor de Forma microATX, 244 mm x 191 mm
Windows XP / Vista / 7/ 8
Soporte OS Biostar reserva su derecho de añadir o retirar el soporte para cada OS con o sin
notificación.
2012/12/12

53

Downloaded from www.Manualslib.com manuals search engine