1.Which period of time does preliminary application of wireless networks begin?

A During the First World War

B During World War II
C. ln the late 20th century
D. After 2000

2. IEEE is the standards organization responsible for United States radio frequency use.
A.True
B. False

3. Which of the following wireless protocol is set by IEEE 802.11 standard(Multiple)?

A 802.11a/b/g/n

B. 802.11i

C. 802.11x

D. 802.11ac

4. Which of the following standards organization for the WLAN device is certified to achieve
interoperability of WLAN technology?

A. WiFi Alliance

B. IEEE

C. IETF

D. FCC

5. Which of the following standard is set by WiFi Alliance?(Multiple)

A. 802.11a/b/g/n
B. WPA
C. WPA2
D. D. 802.11i

6. CAPWAP protocol is proposed as a WLAN standard by IEEE standard organization in April 2009,
used for communication between the AC and the AP

A. True

B. False

7.The following protocols which support 2.4 GHz frequency band()?

(Multiple)
A. 802.11a

B. 802.11b

C. 802.11g

D. 802.11n

8.How many channels do China support in 2.4 GHz frequency band()?

A. 11

B. 13

C. 10

D. 5

9. In the following options which frequency band range belong to China supported 5 GHZ frequency
band()?

A.5.15~5.25 GHz

B.5.25~5.35 GHz

C. 5.725~5.825 GHz

D. 5.735~5,835 GHz

10. According to the different parameters of the control signal, what can be divided into by
modulation mode?(Multiple)

A. AM
B. FM
C. PM
D. SM

11.What is the name of wireless communication network based on the first packet type
technology()?

A. INTERNET

B. ARPANet

C. ALOHANET

D. NSFnet

12.What WLAN operating frequency includes?()?

(Multiple)
 A. 2 GHz
B. 5 GHz
C. 5.4 GHz
D. 2.4 GHz

13.How many channels can be at maximum divided into by 2.4 GHz frequency band()?

A. 14
B. 13
C. 11
D. 3

15. What is the 2.4 GHz frequency band non-overlapping channels()?

A. 2,7,12
B. 3,8,13
C. 1,6,11
D. 3,7,13

16.How much bandwidth each 802.11g frequency band channel()?

A. 25 MHz
B. 20 MHz
C. 50 MHz
D. 22 MHz

17.How long is the distance between adjacent channel center frequency of 2.4 GHz frequency
band()?

A. 20 MHz
B. 22 MHz
C. 5 MHz
D. 10 MHz

18.Which protocol can support both 2.4 GHz frequency band and 5 GHz frequency band()?

A. 802.11a
B. 802.11b
C. 802.11g
D. 802.11n

19.What kind of work does the following technologies in the 5 GHz()?

(Multiple)
A. Radar
B. Bluetooth
C. Infrared
D. digital satellite

20.What is the working frequency of 2.4 GHz spectrum Chinese regulations()?

A. 2.4 GHz-2,4835 GHz
B. 2.471 GHz-2.497 GHz
C. 2.4465 GHz-2.4835 GHz
D. 2.445 GHz-2.475 GHz
21.Basic service set (BSS) is the basic component of 802.11 network, consists of a set of workstations
communicate with each other
A.True
B.False

22.BSSID is the MAC address of the AP actually used to identify a BSS managed AP
A.True
B.False

23.Which of the following is wireless LAN standards originally formulated by IEEE()?

A.IEEE 802.11

B.IEEE 802.10

C.IEEE 802.12

D.IEEE 802.16

24.Huawei AP products can only support configuration of one SSID

A.True

B.False

25.WDS technique improves the flexibility and convenience of the whole network structure, but can
only support the working mode of point to point

A.True

B.False

26.What is the English name of SSID()?

A.Basic Service Set

B.Basic Service Area

C.Extended Service Set

D.Service Set identifier

27.Which of the following AP mode does not belong to WDS network?

A. Root AP
B. Middle AP
C. Bridge AP
 D. Leaf AP

28.What is called of the network composed by a wireless AP and associated wireless client()?

A. IBSS (ad-hoc)
B. BSS
C. ESS
D. NSS

29.Mesh networking is defined in which of the following protocols?

A. 802.11a

B. 802.11g

C. 802.11e

D. 802.11s

30.What is called of the area of single AP coverage()?

A.BSA

B.ESA

C.SSA

D.JSA

31.lf a completely composed of STA in BSS, the BSS is also called()?

A. IBSS
B. ESS
C. SSID
D. BSA

32.What kind of technology belongs to Wireless MAN in the following()?

A. Zigbee
B. WLAN
C. Bluetooth
D. WiMAX

33.lf a Wireless client want to connect to the WLAN via AP, then it is connected to the wireless
network by what()?

A. SSID
B. IBSS
C. ESSID
D. BSA
34.BSS is the Basic Service Set, there are 2 types of BSS: independent BSS and infrastructure BSS.

A. True
B. False

35.ln WLAN, AP works in half duplex

A. True
B. False

36. In 1999, the IEEE 802.11a standard setting is complete, it rules that the Wireless Local Area
Network working frequency in 5.15 ~ 5.825GHz, data transfer rate reached 11 Mbps

A.True

B.False

37. Different from 802.11a/b/g standards, 802.11n protocol is for dual—band work mode (can
support both 2.4GHz and 5GHz two working frequency band)

A. True
B. False

38. 802.11b support () channels in the United States, there are () channels not overlap?
A. 14 3
B. 11 3
C. 11 6
D. 14 6

39 .What is the working frequency band used by original 802.11 protocoI?

A. 2.4 GHz
B. 900 MHz
C. 2.0 GHz
D. 5 GHz

40.What the maximum rate of Mbps do the original 802.11 protocol support?

A. 1
B. 2
C. 5.5
D. 11

41.Which channels are not overlapped with each other in 802.11b protocol? (Multiple)
A. 1
B. 3
C. 6
D. 11

42.Wireless client is passive scanning by receiving what frame to acquire the surrounding
wireless network information ?
A. Beacon frame
B. Probe Request frame
 C. Authentication frame
D. Association Request frame

43.Wireless client is active scanning by receiving what frame to acquire the surrounding
wireless network information ?
A. Beacon frame
B. Probe Request frame
C. Authentication frame
D. Association Request frame

44.What are the WLAN standard supporting 5 GHz frequency band()?

(Multiple)
A. 802.11a
B. 802.11i
C. 802.11g
D. 802.11n

45.What is the China WLAN security mandatory standard()?

A.WiFi
B.WAPI
C.WLAN
D WiMAX

46.CAPWAP protocol is proposed by which of the following standards organizations()?

A. FCC
B. IETF
C. IEEE
D. ETSI

47.Which country or region standard organization is ETSl()?

A. China
B. USA
C. Japan
D. Europe

48.Point-to-point wireless bridge can be used to connect two separate network located in different
sites, in wireless backhaul connection, Root AP and Leaf AP should set different channels.
A. True
B. False

49. A Root AP can connect to multiple Leaf AP, but a Leaf AP only can connect a Root AP.
A. True
B. False

50.In WDS network, AP through cable connected to AC, which is called?

A. LeafAP
B. Middle AP
C. Master AP
D. Root AP
51. 802.11b is based on Orthogonal Frequency Division Multiplexing (OFDM) technology.
A. True
B. False

52.The standard of 802.11n use double band (2.4 GHz and 5 GHz), the maximum theoretical
transmission rate can reach to 300Mbps, actual test rate can reach more than 100Mbps.
A. True
B. False

53.The method of DSSS modulation are BPSK and QPSK.

A. True
B. False

54.Spread spectrum technology is the foundation of using ISM band wireless data transmission.
A. True
B. False

55.Radio frequency mainly use spread spectrum technology, which of the following technology does
belong to spread spectrum technology?

(Multiple)

A. FHSS
B. DSSS
C. QPSK
D. OFDM

56.MIMO antenna configuration is usually expressed as "M ” N", what M and N each means?
(Multiple)

A. M means the number of transmitting antennas

B. N means the number of transmitting antennas

C. N means the number of receiving antennas

D. M means the number of receiving antennas

57.In point to multi-point network environment, one device used as a center device, all other
devices are only set up a wireless bridge with center device, implement multiple network
interconnection. The disadvantage is that multiple branch network communication can data
forwarding through the centre bridge device.

A. True
B. False
58.Which of the following options belong to the differences between 802.11b/g protocol?
A. different capacity
B. two protocols use different technology
C. support different data rates
D. work of different frequency bands

59 .The technology of 802.11n compared to 802.11a/b/g, which of the following advantages

include?

A. the maximum theoretical transmission rate up to 600 Mbps

B. backward compatible with 802.11a/b/g protocols

C. support MIMO technology

D. All the above are correct

60.Because the maximum support rate of 802.11a is the same as 802.11g, so the protocol of 802.11a
is backwards compatible with 802.11g protocol.

A. True

B. False

61. One company want to deploy WLAN, and this company purchase a batch of wireless AP that
support 802.11n , when WLAN deployed, can only support 802.11n wireless client can connect to
the WLAN.
A. True
B. False

62. In frame 802.11, which of the value is used to record network allocation vector(NAV)?
A. Frame Control
B. Duration
C. address
D. order control

63. In the frame of 802.11, which Address bits represent the frame Address at the receiving end()?
A.Address 1
B.Address 2
C.Address 3
D.Address 4

64.In the frame of 802.11, what is the right corresponding relation between Frame Control of the
Type and Frame format()?
A. Type 01 said the data frames (10)
B. Type 10 said the control frame (01)
C. Type 00 said in reserve to use
D. Type 00 said the management frame
65.ln the frames of 802.11, the STA association and certification request belong to which type of
frame()?

A. Data frame

B. Control frame

C. Management frame

D. Data frame, control frame, management frame has this function

66. In the frames of 802.11, when the wireless station sends a signal to wireless AP, what are the
wines of To DS and From DS?
A. 0,0
B. 0,1
C. 1,0
D. 1,1

67.Which two kinds of Basic Service Set are included in BSS()?

(Multiple)
A. independent Basic Service Set
B. infrastructure Structure Pattern Basic Service Set
C. Extend Basic Service Set
D. Extension Structure Pattern Basic Service Set

68.ln the frame of 802.11, when Network employs WDS Model to improve the signal, what are the
values of To DS and From Ds()?
A. 0,1
B. 0,1
C. 1,0
D. 1,1

69. In Wireless LAN 802.11, which contents are included in CSMA/CA Mechanism?
(Multiple)
A. Carrier sense
B. Multiple access
C. Collision detection
D. Collision avoidance

70.Which is the longest interval in the frame of 802.11?

A.SIFS
B.IFS
C.DIFS
D.PIFS

71. In the deployment of WDS, the bridge network model including()?

(Multiple)
A. Point to point mode
B. Point to multi point
C. Relay bridge
 D. Multi point to multi point

72.Which is correct of the following statement()? (Multiple)

A. WDS can transmit the Cable Network Information by the architecture of wireless networks. Take
this the Network Information can be transferred to another wireless network environment or
another cable network.

B. Wireless network bridge' function usually refers to the one-to-one, but WDS architecture can do
one-to-many

C. WDS can bridge (relay) between the Wireless AP through Wireless, but the wireless AP bridge
cannot provide the cover function at the same time.

D. Because through the Wireless Network to form a «dual network fine. so the WDS also known as
the wireless network bridge function

73.Which of the following equipment are belonged to the Huawei dual-band wireless AP(Access
Point)?
(Multiple)
A. AP501ODN
B. AP501OSN
C. AP601OSN
D. AP601ODN

74. lf the AP work is in infrastructure mode, then at this time, AP working condition is full duplex
mode.
A. True
B. False

75. lf AP Client which connect the same SSID want to surf from one AP to another AP, so the
overlapping area between two AP signal()?
A. 80%
B. Don't need to overlap
C. 100%
D. 10%-15%
76.What is the correct statement of following options()? (Multiple)

A. A wireless LAN can be divided into several sub-network which require different authentication by
SSID Technology. Each sub-network needs independent of the authentication. Only authenticated
users can enter the corresponding segment, to prevent unauthorized users to access the network

B. Actually BSSID is MAC address of the AP, which used to identify the AP management of BSSID and
SSID are one-to-one mapping within the same AP

C. The user can implement roaming under different SSID.

D. In one ESS, the SSID are the same, but each AP with the matching BSSID in one ESS is not the
same. lf one AP can support many SSID, then AP can distribute different BSSID to correspond these
SSID

77. In the frames of 802.11, if the terminal to get access to the wireless medium, what kind of
Control Message should be sent()?
A. RTS
B. CTS
C. ACK
D. PS-Poll

78. ln the frames of 802.11, which messages are used to collect the packet to the terminal in the
power saving mode?
A. RTS
B. CTS
C. ACK
D. PS-Poll

79.In the frames of 802.11, what is the interframe spacing between the RTS and CTS()?
A. SIFS
B. IFS
C. DIFS
D. PIFS

80.When completed to transfer one data frame and confirmed, what is the time interval need to
wait before sending the next data frame()?
A. SIFS
B. IFS
C. DIFS
D. PIFS

1.Users will be able to realize L3 level roaming, which precondition include? (Multiple)

A user roaming switch two AP must have the same SSID

B user roaming switch two AP must have the same VLAN

C user roaming switch two AP signal coverage overlap area

D user roaming switch two AP release the SSID must have the same authentication

2.The standard of eSight can support how many management node?

A 60

B 2000

C 5000

E 20000

3. A large number of equipment meet AP and AC mismatch, how to deal with?

A. Upgrade version and make it match with each other

B. change AP equipment

C. rep|ace the switch

D. check POE power supply, if it is normal

4. Which of the following can use to judge equipment manufacturers?

A.SSlD

B.MAC address

C.encryption

D.channel

5.The command “display ap all” can check MAC, Type and running of AP.

A True

B False

6.|n Huawei eSight, which method include can add the WLAN device?

(Multiple)

A. add manually
B. add automatically
 C. add batch
D. add script

7.What kind of configuration mode that wireless controller support?

(Multiple)

A.telnet configuration

B.console port configuration

C.eSight configuration

D.LLDP configuration

8.Which reason can result AP could not be online?

(Multiple)

A.DHCP address pool incorrect configuration lead to AP unable to get the address

B.AP use static IP configuration, but the IP of AC configure incorrect

C.the version of AP do not match with AC

D.contro|ler adopted the no-auth authentication mode

9.Which command can check the current AC configurations?

A.display interface

B.display current-configuration

C.disp|ay ap all

D.disp|ay version

10 .Which command can check the current version information?

A.display interface

B.display current-configuration

C.disp|ay ap all

D.display version
11.Which of the following statement are correct about the classification of the antenna?

(Multiple)

A.according to the classification of direction: omni-directional antenna, directional antenna

B.according to the shape classification: linear antenna, planar antenna, etc

C.according to use classification: shortwave antenna, ultra-short wave antenna and

microwave antenna, etc

D.according to the working frequency band classification: communication antenna, TV

antenna, radar antenna, etc

12. For outdoor long distance point-to-point back, which antenna need to choose?

A.high gain, small lobe width

B.high gain, large lobe width

C.omni-directiona|

D.low gain, large lobe width

13. AP transmission power 20dBm, antenna gain 4dBi, cable and device loss 1 dB, terminal
receiving antenna gain 2dBi, space transmission loss 80 dB, terminal reception level RSSI
is? TxP+ TX Gain – Cable Loss + RX Gain – Space Loss=RxP

A.-57

B.-56

C.-55

D.-54

14.When wireless network engineer process WLAN network planning, what is the purpose of
using the RF simulation?

(Multiple)

A. coverage effect of analog signal, find out the blind spot

B. get field intensity distribution at different locations
C. get current SNR situation at different locations
D. get the available bandwidth at different locations
15.For the area which has roaming demand, coverage area of adjacent AP keep more than
50% of the overlap, to ensure the smooth transition of the terminal between AP.

A. True

B. False

16.Process WLAN planning in single area, which of the following factors affect the number of
AP?

(Multiple)

A.The number of people which access to area

B.The size of the area

C.Field intensity and bandwidth requirements

D.The number of the network port

17.What factors are related to AP coverage area?

(Multiple)

A. AP transmit power

B. antenna gain

C. AP volume size

D. Transmission loss

18 .The electrical performance indicators of Antenna include?

(Multiple)

A. gain
B. lobe width
C. power size
D. polarization mode

19.For dBm,dB and dBi, which of the following description is correct?

(Multiple)

A. dBm: characterize absolute power value

B. dBi and dBd: characterize the relative value of the gain

C. dB: characterize the relative power value

D. if antenna A is 12 dBi, antenna B is 14 dBi, which can say that A is smaller than B for 2
dBi.

E. if antenna A is 12 dBi, antenna B is 14 dBi, which can say that A is smaller than B for 2
dB.

F. if antenna A is 12 dBi and we add 2 dB of gain, the new value is 14 dBi

20. The gain of antenna A is 11dBi, the gain of antenna B is 8 dBi, then it can say that the
gain of antenna A is bigger than antenna B for ? 11 dBi – 8 dBi = 3 dB

A. 3 dB

B. 3 dBi

C. 3 dBd

D. Not sure

21.20dBm is equal to ()mW. 10dBm + 10dBm = 10mWx10mW

A. 100

B. 200

C. 500

D. 1000

22.Which of the following factors are the AP capacity planning needs to consider? (Multiple)

A.equipment performance

B.the number of concurrent users

C.bandwidth requirements

D.Power supply type

23.Choice of WLAN covering antenna, for long and narrow area, we suggest (); for open and
short area, we suggest ().

A.omni-directional antennas; Omni-directional antenna

B.omni-directiona| antennas; Directional antenna

C.directional antenna; Omni-directional antenna

D.directional antenna; Directional antenna

24.WLAN AP may power by way of ().(Multiple)

A.POE switches

B.POE adapter

C.independent power adapter

D.radio frequency cable

25.If the coverage area has a higher demand on WLAN capacity, it should consider the
construction mode of a?

A.distribute system indoor

B.distribute system outdoor

C.indoor

D.AP + directional antenna outdoor

26.AP and the antenna can connect by ?

A.lnternet cable

B.CATV coaxial cable

C.the powerline

D. coaxial cable of the 50 ohm radio frequency

27.Capacity planning mainly from the equipment performance, users, bandwidth

requirements, and wireless environment to estimate the number of AP to meet business
needs.

A.True

B.False

28.Which of the following obstacles have the largest loss on the wireless signal?
A. wood

B. g|ass

C.120 mm brick wall

D. 200 mm concrete wall

29.The coverage area size of AP is controlled by way of ().(Multiple?)

A.adjust the angle of AP antenna

B.adjust the transmission power of AP

C. adjust the power supply of AP

D.adjust the access bandwidth of AP

30.Which of the following option is a prerequisite for starting Huawei load balancing
function?

A.AP belong to the same type

B.AP under the management of same AC, and signal has overlap between AP

C.STA can scan AP which can process load balancing each other

D.accord the setting of AP's output power

31.Which of the following options are common WLAN interference source? (Multiple)

A.the microwave

B.the remote control

C.cordless phone

D.the bluetooth transmission equipment

32.According to the directionality, antenna can be divided in ()antenna and ()

antenna.(Multiple)

A.linear

B.parabolic

C.omni-directional
D. directional

33.Meta| items have great influence on the attenuation of wireless signal, the AP or antenna
should avoid to place behind the metal ceiling, etc.

A.True

B.False

34.Lobe width is an important parameter which directional antenna commonly used.it is the
width of the Angle below peak () dB place in the antenna's radiation pattern.

A. 3

B. 4

C. 5

D. 2

35.Omnidirectional antenna in the horizontal directional diagram shows () degree.

A.90

B.180

C.360

D.0

36.Deploy 3 AP in the first loor, from left to right, the channel respectively are 1, 6, 11; at this
point, deploy 3 AP in the second floor, channel should be divided into ()

A. 1, 6, 11

B. 2, 7, 12

C. 6, 11, 1

D. 1, 6, 1

37.What 802.11 protocol is to define the quality of service in the WLAN?

A.802.11f

B.802.11i

C.802.11e

D.802.11n

38.For the convenience of management and maintenance, AP power supply general

preference for () power supply.

A.independent power adapter

B.POE switches

C.POE adapter

D.AC power supply

39.CAPWAP tunnel encapsulation AC side data message port number is 5246, control
message port number is 5247

A.True

B.False

40.Terminals in different VLAN roaming belongs to?

A. seamless roaming AP

B. roaming on the second floor

C. three layers of roaming

D. four |ayers roaming

41.What is used to define roaming in the IEEE 802.11 standard().

A.lEEE 802.11c

B.IEEE 802.11h

C.IEEE 802.11i

D.lEEE 802.11r
42.Which of the following statement is correct about WDS?

(Multiple)

A.Two independent local area network (LAN) in a wireless bridge connection, and provides
data transmission between them

B.WDS default use 2.4 GHz frequency band as bridge frequency band

C.Good extensibility, and without laying a new cable connection to deploy more AP

D.Huawei indoor AP does not support function of WDS

43.TKIP encryption is higher than WEP encryption in security, because ?

(Multiple)

A.adopt longer IV

B.joined the key distribution mechanism, instead of using a singe key

C.adopt the more complicated the encryption algorithm

D.adopt the stronger data validation algorithm

44.Which of the following statements are correct?

(Multiple)

A.When the user is in the process of web authentication, which is before obtaining IP
address successfully, triggered by the user's HTTP message; at this time, forced to redirect
to the portal server, carries on the authentication process

B.When the user is in the process of web authentication, which is after obtaining IP address
successfully. triggered by the user's HTTP message: at this time, forced to redirect to the
portal server. carries on the authentication process

C.WPA2 adopted authentication of 802.1X

D.WPA only support TKIP encryption technology

45. Currently, security strategy based on user authentication which is used in great
quantities in the enterprise network is ?

(Multiple)

A.WPA2 PSK+TKIP/CCMP

B.WPA 802.1x+TKlP/CCMP

C.WPA2 PSK+TKIP/CCMP

D.WPA2 802.1x+TK|P/CCMP

46.WIDS attack detection contains?

(Multiple)

A.Flood attack detection

B.Weak IV attack detection

C.Spoof attack detection

D.The microwave interference detection

47.For AC6605, whether the following command () can be used to view the AP online.

A.display ap online all

B.display ap all

C.display ap-type all

D.display ap-run-info all

48.Originally only support TKIP wireless network card can drive upgrade to support AES
encryption.

A. True

B.False

49.The security level of CCMP encryption is higher than TKIP encryption security, because?

A.use the longer IV

B.add the key distribution mechanism, instead of using a single key

C.use the more complicated encryption algorithm

D.add the message integrity checking mechanism

50 .Which of the following port belongs to only one VLAN()

A.access

B.hybrid

C.trunk

D.eth-trunk (LAG)

51.|n TKIP encryption, What bit is the length of IV vector?

A.12

B.24

C.48

D.64

52.What does the algorithm that CCMP Encryption use?()

A.RC4

B.AES

C. CRC

D.Michael

53.In terms of PoE, AP belong to()?

A.PSE

B.PD

C.PI

D.PSU

54.The same user VLAN and the same SSID wireless users can both access the Internet,
but they cannot visit each other, what is the proper reason that causes this situation?
A.it configures ACL on user's gateway equipment, prevents the mutual visit between users

B.it configured ACL on ACL, preventing the mutual visit between users

C.the configured port isolate on the access AP switch that prevent the mutual visit between
user

D.it configures user isolation on wireless service-set that prevent the mutual visit between
users

1.There are three frame types of 802.11 (Multiple)

A Data Frame

B Control Frame

C Business Frame

D Management frames

2.Parameter which used to check the integrity of the received frame in 802.11 frame is

A Frame Control

B Duration

C FCS

D Sequence control bit

3.Barker code is a sequence of bits 11 (e.g., 10110111000), there is advantage in wireless

transmission, can effectively reduce the interference, but reduces the efficiency.

A True

B False

4.In the frames of 802.11, what is the inter-frame spacing between the RTS and CTS?

A SIFS

B IFS

C DIFS

D PIFS
5.In 20MHz Mode, how many subcarriers of 802.11a can be used to transfer data()?

A 48

B 52

C 54

D 56

6.If one AP of 802.11n support 2x2 MIMO technology, the theoretical rate of this AP is?

A 150 Mbit/s No MIMO

B 300 Mbit/s (2x2)

C 450 Mbit/s (3x3)

D 600 Mbit/s (4x4)

7.In 20MHz Mode, how many subcarriers of 802.11n can be used to transfer data?

A 48

B 52

C 54

D 108

8.In the process of FIT AP find out of AC, the first step is AP check for preconfigured AC static IP list.

A True

B False

9.What are the function of AC in wireless network?

A Centralized management of AP

B Implement roaming function

C Send a beacon frames

D Intrusion Detection Systems

10.Port MEth0/0/1 of AC6605 is used to in-band networking, the default address is 192.168.110.4,
and cannot be modified.

A True
B False

11.Telnet is one of the ways in which the remote management of AP, can be configured to achieve
the Telnet based on user name password authentication.

A True

B False

12.What is the command of checking online users on the AC?

A display users all

B display user-interface console 0

C display local-user

D display access-user

13.Huawei wireless controller AC6605 support through security template for user access security
management, and support the WEP, WPA, WPA2 and WAPI four security policy.

A True

B False

14. What is the VLAN which is used to establish CAPWAP tunnel between AP and AC?

A Management VLAN

B Service VLAN

C User VLAN

D Certified VLAN

15. eSight is Huawei special network management platform, but could only manage Huawei
equipment.

A True

B False

16. Configuration of the AP authentication mode, what kinds of AP authentication support? (multiple
answers)
A mac-auth

B sn-auth

C no-auth

D mac-sn-auth

17. According to the network architecture between AP and AC, the networking can be divided into
two layer network mode and three layer network mode.

A True

B False

18. The following description of AP is correct?

A Fit AP is also known as wireless router

B Fit AP due to the function, is gradually replaced by fat AP

C Fit AP cannot be configured alone, must be used together with the wireless controller

D Fit AP can achieve 802.1X authentication, encryption, and other functions, the roaming function,
they are all implemented on the wireless controller

19. If an enterprise wireless networking mode is forwarding directly, the AP can translate 802.11
data packet into Ethernet packets, and then make CAPWAP message encapsulation, through this
datagram CAPWAP tunnel is transmitted to the AC.

A True

B False

20. For the CAPWAP protocol, described below is wrong:

A Transport protocol between AC and FIT AP

B The transport protocol between FIT AP and wireless client

C Set by the CAPWAP working group

D Set by the working group on CAPWAP protocol formulation learned from other useful features

21. If the switch opens the PoE function, can no longer access traditional equipment on these
interfaces.
A True

B False

22. In the WLAN configuration, how many types that related to VLAN type?( Multiple answers)

A Management VLAN

B Service VLAN

C User VLAN

D Certify VLAN

23. Which two of the following are PoE power supply standard? (Multiple answers)

A IEEE 802.3ae

B IEEE 802.3af

C IEEE 802.3as

D IEEE 802.3at

24. What 802.11 protocol is to define the quality of service in the WLAN?

A 802.11f

B 802.11i

C 802.11e

D 802.11n

25. Metal items have great influence on the attenuation of wireless signal, the AP or antenna should
avoid to place behind the metal ceiling, etc.

A True

B False

27. In WDS peer-to-peer network, the backbone link between Root AP and Leaf AP connected by 5
GHz frequency band, the frequency band of Root AP is channel 149, so which frequency band should
be picked of Leaf AP?

A 149
B 153

C 157

D All of them except 149

28. How much bandwidth each 802.11b frequency band channel?

A 25 MHz

B 20 MHz

C 50 MHz

D 22 MHz

29. In 20MHz Mode, how many subcarriers of 802.11n can be used to transfer data()?

A 48

B 52

C 54

D 56

30. What kinds of AP authentication is the default?

A mac-auth

B sn-auth

C no-auth

D mac-sn-auth

33. About the two standards of PoE, which following statement is not correct. (Multiple answers)

A 802.3at standards were made in 2009, the maximum output power is 30W

B 802.3af support four power levels

C 802.3at is also called PoE+, can be compatible with 802.af equipment

D 802.3af is also called PoE+, can be compatible with 802.at device

34.WEP encryption' data algorithm using the algorithm:

A RC4

B AES

C CCMP

D asymmetric encryption

35. AAA is a kind of management framework, which agreement does it use to realize?

A RADIUS

B CAPWAP

C 802.11a/b/g/n

D 802.1x

37. In the following several kinds of encryption, which has the best security

A Plaintext encryption

B WEP encryption

C TKIP encryption

D CCMP encryption

38. In the FIT AP network, which of the following authentication doesn’t need AC participation in the
process of authentication?

A Shared key authentication

B 802.1X authentication

C PSK authentication

D Portal authentication

40. AP radio resource management systematic process is.

A Collecting > Decision > Analysis > implementation

B Analysis > Collecting > Decision > implementation

C Collecting > Analysis > implementation > Decision

D Collecting > Analysis > Decision >implementation

41. Which of the following options, is not the main purpose of roaming.

A avoid roaming in the process of certification time is too long lead to packet loss and even business
interruption

B ensure that the user authorization information remains the same

C ensure that the user IP address remains the same

D ensure that the user's network rate unchanged