Scribd
Upload
469 views1 page

Bemodeadp1 Schematic V1: External Power Supply I/O Terminal DB-9 Connector

This schematic shows the connections between an external power supply and an engine control unit (ECU) using a DB-9 connector and various communication lines. Power of +12V and ground is provided from the external supply to the ECU along with connections from the I/O terminal to the ECU's KLINE, CANL, and CANH communication buses and a ground connection.

Uploaded by

soportenacional nacional
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
469 views1 page

Bemodeadp1 Schematic V1: External Power Supply I/O Terminal DB-9 Connector

This schematic shows the connections between an external power supply and an engine control unit (ECU) using a DB-9 connector and various communication lines. Power of +12V and ground is provided from the external supply to the ECU along with connections from the I/O terminal to the ECU's KLINE, CANL, and CANH communication buses and a ground connection.

Uploaded by

soportenacional nacional
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BEMODEADP1 SCHEMATIC v1

+12V GND External power supply

I/O Terminal DB-9 connector

TO ECU KLINE

TO ECU CANL

TO ECU CANH
TO ECU GND
TO ECU POWER LINES +12V

You might also like