Scribd
Upload
370 views3 pages

Polymer Technology Engineering MCQ Test Questions

This document contains 13 multiple choice questions about polymer technology and engineering. The questions cover topics like identifying copolymers such as nylon-66, the purpose of adding peptizers to rubber, the type of bonds between chains in nylon-66, processes for making thin plastic articles, properties of polypropylene that make it preferable to polyethylene, reasons for adding plasticizers to synthetic plastics, common uses of polystyrene, which polymer products cannot be produced using an extrusion machine, the type of rubber used in tubeless tires, the repeating units of PTFE, the name for the polymerization process involving two or more chemically different monomers, and which listed polymer is not manufactured using condensation

Uploaded by

Surendra Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
370 views3 pages

Polymer Technology Engineering MCQ Test Questions

This document contains 13 multiple choice questions about polymer technology and engineering. The questions cover topics like identifying copolymers such as nylon-66, the purpose of adding peptizers to rubber, the type of bonds between chains in nylon-66, processes for making thin plastic articles, properties of polypropylene that make it preferable to polyethylene, reasons for adding plasticizers to synthetic plastics, common uses of polystyrene, which polymer products cannot be produced using an extrusion machine, the type of rubber used in tubeless tires, the repeating units of PTFE, the name for the polymerization process involving two or more chemically different monomers, and which listed polymer is not manufactured using condensation

Uploaded by

Surendra Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Polymer Technology

Engineering MCQ Test


Questions

1. _________ is a copolymer.
(A) Nylon-66
(B) Polypropylene
(C) PVC
(D) Poly tetra fluoro ethylene

2. Peptizers like aromatic mercaptans (e.g. thiophenes) are added in rubber


to
(A) Protect rubber goods from attack by oxygen & ozone present in the atmosphere
(B) Reduce its viscosity to permit easier processing
(C) Reduce the time of vulcanization and quantity of vulcanizing agent
(D) Increase its viscosity

3. The inter particle forces between linear chains in nylon-66 are __________
bonds.
(A) Hydrogen
(B) Covalent
(C) Ionic
(D) None of these

4. Paper like thin plastic articles can be produced by


(A) Blow moulding
(B) Vacuum thermo forming
(C) Injection moulding
(D) None of these
5. Polypropylene is preferred to polythene, because the former is
(A) Non-inflammable
(B) Harder
(C) Stronger
(D) Both (b) & (c)

6. Plasticizers are added to synthetic plastics to


(A) Impart flexibility
(B) Improve workability during fabrication
(C) Develop new improved properties not present in the original resin
(D) All (a), (b) and (c)

7. Polystyrene is a light, transparent, thermoplastic material used for making

(A) Toys and combs


(B) Packaging bags
(C) Non-sticking utensils
(D) Electrical insulation

8. All thermoplastic, thermosetting & elastic materials can be processed in a


extrusion machine, however it cannot be used for the production of plastic
(A) Filaments
(B) Pipes
(C) Buckets
(D) Tubings

9.. Tubeless tyres are made of __________ rubber, which is a co-polymer of


isoprene & isobutylene.
(A) Nitrile
(B) Silicone
(C) Neoprene
(D) Butyl

10. The repeating units of PTFE are


(A) Cl2CH-CH3
(B) F2 C = CF2
(C) F3 C-CF3
(D) FClC = CF2

11. Polymerization process in which two or more monomers of chemically


different nature take part is called
(A) Copolymerization
(B) Addition polymerization
(C) Chain polymerization
(D) None of these

12. Condensation polymerization is not involved in the manufacture of


(A) Teflon
(B) Polythene
(C) Terylene
(D) Nylon

13. Linear polymers are normally


(A) Thermosetting
(B) Thermoplastic
(C) Elastometric
(D) Having extremely high softening point

You might also like