01

02
Australia & New Zealand Catalogue

Products and technologies for all 03

your application needs,
today and tomorrow 04
REFRIGERATION & AIR CONDITIONING
Flow Controls | Electronic Controllers | Compressors | IR Products

05

06

07

Easy
selection of future-
08

proof solutions and 09

components.

10

11

12

13

www.danfoss.com.au 14
Quick Selection Catalogue 1
Table of contents
01 - Thermostatic expansion valves 4
T2 / TE2, Thermostatic expansion valves 4
TUA / TUAE, Thermostatic expansion valves 8
TE 5 – TE 55, Thermostatic expansion valves 10
TGE, Thermostatic expansion valve 14
02 - Electric expansion valves 16
AKV, Electric expansion valve 16
ETS 6, Electric expansion valve 18
ETS 12.5 – ETS 400, Electric expansion valves 20
03 - Solenoid valves 22
EVR version 2, Solenoid valve 22
EV220B, Solenoid valves 26
04 - Pressure switches and Thermostats 28
KP, Pressure switch 28
KP, Thermostat 30
077B, Thermostat 32
05 - Pressure and temperature regulating valves 34
KVR / NRD, Condensing pressure regulator / Differential pressure valve 34
KVP, Evaporator pressure regulator 36
KVL, Crankcase pressure regulator 38
06 - Filter driers 40
DML, Hermetic filter drier 40
DAS, Hermetic burn-out filter drier 42
DMB, Hermetic bi-flow filter drier 44
DCR, Filter drier with replaceable solid core 46
07 - Sight glasses 48
SGP, Sight glass (high pressure) 48
08 - Shut-off valves 50
GBC version 2, Shut-off ball valve 50
BML, Shut-off diaphragm valves 52
09 - Check valves 54
NRV / NRVH, Check valves 54
10 - Electronic controllers 56
ERC 211 / ERC 213 / ERC 214, Refrigeration controllers 56
EKC 315A, Refrigeration control 58
LP-ETS kit and ETS, Superheat controller 60
AK-CC 250A, Universal refrigeration controller 62
AK-CC 550A, Controller for appliance control 64
AK-PC 351, Capacity controller 66
AK-PC 551, Capacity controller 68
AK-PC 651, Capacity controllerAK-PC 651, Capacity controller 70
AK-SM 800 series, System manager 72
Optyma™ Control, Single / Three-phase 74
11 - Sensors and Transmittors 78
MBS 3000, Compact pressure transmitter 78
MBS 3100, Compact pressure transmitter 80
MBS 5100, Pressure transmitter 82
AKS, Pressure transmitters 84
EKS / AKS, Temperature sensors 86
DGS, Gas sensors 88

2 Quick Selection Catalogue

12 - Compressors 90
Secop reciprocating compressors produced for Danfoss - Direct current 90
Secop reciprocating compressors produced for Danfoss- Light commercial 92
MTZ / NTZ, Reciprocating compressors 96
MLZ / LLZ, Scroll compressors for refrigeration 98
H-Series, Scroll compressor 100
SH / SY / SZ, S-Series, Scroll compressors 102
Overview of lubricant / oil types 104
Spare parts and accessories 106
13 - Industrial refrigeration 108
Industrial refrigeration product overview 108
14 - Danfoss Infogram 112
Danfoss Infogram 112

Quick Selection Catalogue 3

T2 / TE2, Thermostatic expansion valves
T2 / TE2 thermostatic expansion valves are used for liquid injection T2 / TE2 valves are supplied as a parts programme, with separate
into evaporators on both refrigeration and air conditioning systems thermostatic element/valve body and orifice assembly. Available as
using fluorinated refrigerants e.g. R407C / R22, R134a, R404A / R507, angleway valves with flare x flare or flare x solder connection, with
R407C, R407F and R407A. internal and external equalisation.

Features
T2 / TE2

Laser-welded power element

in stainless steel Stainless steel capillary tube
• long diaphragm life and bulb:
• high pressure tolerance • high corrosion resistance
and working pressure • high strength and vibration
• high corrosion resistance resistance

Laser-engraved label
Flare or solder outlet

Flare or solder
pressure equalization
Easy adjustment of
superheat setting

Interchangeable
orifice assembly with
dirt protection strainer
Flare inlet
Solder adaptor available
as an option

Facts

Applications: Refrigerants: Benefit:

• Traditional refrigeration • R22 • Interchangeable orifice assembly
• Heat pump systems • R134a • Easy stocking
• Air conditioning units • R513A • Easy capacity matching
• Liquid coolers • R448A • Better service
• Transport refrigeration • R449A • Can be supplied with MOP(Max. Operating
• R404A Pressure)
Maximum working temperature: • R507 • Protects the compressor motor against
• -60 to 10 °C / -76 to 50°F excessive evaporating pressure during
Capacity range: normal operation
• 0.18 – 6.51 TR / 0.64 – 22.9 kW

4 Quick Selection Catalogue

 01
Technical data and ordering
02

03
Thermostatic element + Orifice
TE2 - External T2 - Internal
equalization equalization

T2 / TE2
Thermostatic element with: bulb strap, without: orifice, strainer cone and nuts
Flare × flare connection
04
Code no.
Connection
Pressure Range N Range NL Range B
Capillary Tube Inlet × outlet
Refrigerant Valve type equalization
Flare
(m)
-40 to +10°C -40 to -15°C -60 to -25°C 05
in. × in. mm × mm Without MOP MOP +15°C MOP -10°C MOP -20°C

T2 Int. 068Z3206 068Z3208 - -

R22
TE 2 Ext. 068Z3209 068Z3211 068Z3227 068Z3229

R134a
T2 Int. 068Z3346 068Z3347 - - 06
TE 2 Ext. 068Z3348 068Z3349 - -
1.5 3
/8 × 1/2 10 × 12
T2 Int. 068Z3400 068Z3402 068Z3408 068Z3410
R404A / R507
TE 2 Ext. 068Z3403 068Z3405 068Z3409 -

R448A / R449A
T2 Int. 068Z3727 - - -
07
T2 Ext. 068Z3728 - - -

TE2 - External T2 - Internal

08
equalization equalization
T2 / TE2
Thermostatic element with: bulb strap, without: orifice, strainer cone and nuts
Flare × solder connection
Code no.

Connection Range N Range NL Range B 09

Pressure
Capillary Tube
Refrigerant Valve type equalization
(m) -40 to +10°C -40 to -15°C -60 to -25°C
Solder
Outlet MOP -10°C MOP -20°C
Inlet Flare Without MOP MOP +15°C
ODFsolder

R22
T2 - 068Z3281 - - - 10
TE 2 1/4 in. 068Z3284 - - -
T2 - 068Z3383 068Z3387 - -
R134a
TE 2 1/4 in. 068Z3385 068Z3389 - -
1.5 3/8 in. 1/2 in.
R404A / R507
T2 - 068Z3414 068Z3416 - 068Z3420
11
TE 2 1/4 in. 068Z3415 068Z3417 068Z3430 -
T2 - 068Z3729 - - -
R448A / R449A
TE 2 1/4 in. 068Z3730 - - -

12

13

Quick Selection Catalogue 5

14
Technical data and ordering Flare
version
Solder adapter
version

T2 / TE2
Orifice assembly (Flare version)
Rated capacity in kW
Orifice no. Code no.
R22 R407C R134a R404A/R507 R407A R407F R448A R449A

MT LT MT LT MT LT MT LT MT LT MT LT MT LT MT LT

0X 0.95 0.9 0.95 0.86 0.7 0.6 0.67 0.59 0.89 0.81 1.04 0.96 0.93 0.86 0.92 0.84 068-2002
0 1.79 1.37 1.76 1.32 1.14 0.78 1.3 0.95 1.65 1.24 1.96 1.5 1.75 1.36 1.71 1.34 068-2003
1 3.23 2.08 3.2 2.04 1.83 1.1 2.48 1.5 2.99 0.9 3.65 2.34 3.23 2.13 3.14 2.11 068-2010
2 4.11 2.43 4.04 2.36 2.17 1.25 3.28 1.76 3.78 2.21 4.7 2.73 4.12 2.49 4.02 2.47 068-2015
3 6.96 4.12 6.86 3.98 3.65 2.1 5.61 2.98 6.34 3.71 8.01 4.59 7.01 4.19 6.82 4.16 068-2006
4 10.52 6.06 10.15 5.83 5.37 3.1 8.61 4.38 9.5 5.44 11.88 6.72 10.47 6.15 10.22 6.12 068-2007
5 14.17 7.92 13.43 7.62 7.08 4 11.36 5.76 12.58 7.12 15.75 8.81 13.69 8.05 13.35 8.02 068-2008
6 16.53 9.25 16.07 9 8.46 4.84 13.58 6.82 15.05 8.39 18.87 10.4 16.58 9.57 16.16 9.53 068-2009

Rated capacity at:

MT rated condition: Evaporating Temp. te = -5 °C, Condensing Temp. tc = +40 °C, superheat=8K , Subcooling=4K
LT rated condition: Evaporating Temp. te = -25 °C, Condensing Temp. tc = +40 °C, superheat=8K , Subcooling=4K

Out of the box, factory settings:

On systems charged with R134a; SSH = 5.0 °C (9.0 °F)
On systems charged with R513A; SSH = 6.1 °C (11 °F)

Note: For capacity of other refrigerant please refer datasheet of the valve or Coolselector.

6 Quick Selection Catalogue

 Quick Selection Notes:
01

02

03

04

05

06

07

08

09

10

11

12

13

Quick Selection Catalogue 7

14
TUA / TUAE, Thermostatic expansion valves
TUA / TUAE stainless steel thermostatic expansion valves are TUA / TUAE valves are supplied as parts programme, with separate
used for liquid injection into evaporators on both refrigeration and air thermostatic element / valve body, and orifice assembly. TUA has
conditioning systems using flourinated refrigerants e.g. R134a, R404A, internal equalization, TUAE external equalization. TUA / TUAE are
R407C, R22, R507 and R410A. TUA / TUAE valves are compact in straightway valves, and have adjustable superheat setting.
design, light weight and have steel / copper bi-metal connections for
fast soldering.

Features
TUA / TUAE

Stainless steel capillary

tube and bulb:
• high corrosion resistance
• high strength and
vibration resistance
Laser welded stainless steel
thermostatic element for Laser-engraved label
unsurpassed joint strength
and operational lifetime

Bi-metal connections
Stainless steel with rolled
on copper cladding for
safe, fast and convenient
Separate strainer, mounted copper-to-copper
on the orifice assembly for easy soldering
maintenance and cleaning

Orifice assembly with an

unmatched hermetic seal

Facts

Applications: Refrigerants: Benefit:

• Traditional refrigeration • R22 • The use of stainless steel makes the valves
• Heat pump systems • R134a light and strong
• Air conditioning units • R513A • Bi-metal connections for safe, fast and
• Liquid coolers • R404A convenient soldering
• Ice cube machines • R507 • Bi-flow function (TUAE: only orifice 1 – 8 )
• Transport refrigeration • R407C
• R410A
Maximum working temperature:
• -40 to 10 °C / -40 to 50°F Capacity range:
• 0.11 – 6.56 TR / 0.42 – 23.1 kW

8 Quick Selection Catalogue

 01
Technical data and ordering TUAE external
equalization
TUA internal
equalization

TUA / TUAE
02
Thermostatic element, without orifice or strainer, with bulb strap
Code no.
Connections
Range N Range
Pressure Capillary Tube Inlet × outlet
Refrigerant Type
equalization (m)
-40 to +10°C -40 to 03
in. Without MOP MOP +15°C MOP 0°C

TUA Int. 068U2235 - -

R22
TUAE Ext. 068U2237 - -
TUA Int. 068U2205 - - 04
R134A/R513A
TUAE Ext. 068U2207 - -
TUA Int. 1.5 3/8 × 1/2 068U2285 - -
R404/R507
TUAE Ext. 068U2287 068U2295 068U2303

R407C
TUA Int. 068U2325 - - 05
TUAE Ext. 068U2327 - -
R410A TUAE Ext. 1/4 in. 068U1714 - -

06
TUA / TUAE
Orifice assembly with filter and gasket
R134A R404A/R507 R407C R22 R410A
Valve type/
Orifice
Code no. 07
MT LT MT LT MT LT MT LT MT LT

TU Orif. 0 0.36 0.21 0.43 0.25 0.58 0.36 0.57 0.36 0.94 0.61 068U1030
TU Orif. 1 0.53 0.31 0.64 0.37 0.82 0.51 0.84 0.53 1.25 0.81 068U1031
TU Orif. 2 0.61 0.35 0.75 0.42 0.96 0.57 0.98 0.6 1.52 0.93 068U1032
TU Orif. 3 0.81 0.47 0.99 0.57 1.27 0.78 1.29 0.81 1.95 1.25 068U1033
08
TU Orif. 4 1.34 0.75 1.7 0.92 2.13 1.24 2.18 1.3 3.51 2.02 068U1034
TU Orif. 5 1.79 1.01 2.27 1.24 2.85 1.67 2.91 1.75 4.67 2.72 068U1035
TU Orif. 6 2.79 1.58 3.55 1.92 4.43 2.59 4.54 2.72 7.34 4.21 068U1036
TU Orif. 7 3.69 2.09 4.69 2.53 5.85 3.42 6 3.59 9.68 5.56 068U1037 09
TU Orif. 8 5.47 3.1 6.86 3.73 8.6 5.03 8.82 5.29 13.99 8.17 068U1038
TU Orif. 9* 7.48 4.32 9.37 5 11.6 6.72 11.98 7.21 19.37 10.85 068U1039

Rated capacity at:

MT rated condition: Evaporating Temp. te = -5 °C, Condensing Temp. tc = +40 °C, superheat=8K , Subcooling=4K 10
LT rated condition: Evaporating Temp. te = -25 °C, Condensing Temp. tc = +40 °C, superheat=8K , Subcooling=4K

*TUAE with orifice no. 9 can't be used for Biflow operation.

Out of the box, factory settings:

On systems charged with R134a; SSH = 5.0 °C (9.0 °F)
11
On systems charged with R513A; SSH = 6.1 °C (11 °F)

Note: For capacity of other refrigerant please refer datasheet of the valve or Coolselector.

12

13

Quick Selection Catalogue 9

14
TE 5 - TE 55, Thermostatic expansion valves
TE 5 - TE 55 thermostatic expansion valves regulate the injection of TE 5 - TE 55 valves are supplied as parts programme, built up of three
refrigerant liquid into evaporators for medium sized plants. Injection main components - thermostatic element, orifice assembly, and valve
is controlled by the refrigerant superheat. Therefore the valves are body with connections, and have external pressure equalization.
especially suitable for liquid injection in "dry" evaporators where the Refrigerants: R22, R134a, R404A, R507, R407A, R407F and R407C.
superheat at the evaporator outlet should always be kept constant.

Features
TE 5 - TE 55

Stainless steel capillary tube

and bulb
• high corrosion resistance
Laser-welded power element • high strength and vibration
in stainless steel resistance
• longer diaphragm life
• high pressure tolerance
and working pressure
• high corrosion resistance

Large parts programme

ensures minimal stocks

To ensure long operating life, Easy adjustment of

the valve cone and seat superheat setting
are made of a special alloy
with particularly good wear
qualities

More connection possibilities

• solder × solder
• flare × flare
• flanges
• straightway or angleway

Facts

Applications: Refrigerants: Capacity range:

• Traditional refrigeration • R410A • 2.3 – 71 TR / 8.17 – 250 kW
• Air coinditioning units • R22
• Water chillers • R134a Benefit:
• R407F • Balance port design
Maximum working pressure: • R407A • Biflow with expansion in both directions
• 46 bar / 667 psig • R404A • Cylindrical bulb and patented bulb strap
• R507 design
• R407C
• R32
• R290

10 Quick Selection Catalogue

 01
Technical data and ordering
02

03
Thermostatic element + Orifice + Valve body

TE5 - TE 55
Thermostatic element - including bulb strap, Capillary Tube - 3M 04
Code no.
Valve type Refrigerant
Range N -40 to +10°C Without MOP

TE 5
TE 12 R407C
067B3278
067B3366
05
TE 55 067G3240
TE 5 067B3297
R134a
TE 12 067B3232
TE 5 067B3342 06
TE 12 067B3347
R404A / R507
TE 20 067B3352
TE 55 067G3302
TE 5 067B3250 07
TE 12 067B3210
R22
TE 20 067B3274
TE 55 067G3205
TE 5
TE 12
067B3252
067B2512
08
R448 / R449
TE 20 067B3294
TE 55 067G3219

09
TE5 - TE 55
Body selection

Type
Connection Inlet × Outlet Code no.
10
in. Flare angleway Solder angleway Solder straightway

1/2 × 5/8 067B4013 067B4009 1) 067B4007 1)

1/2 × 7/8 - 067B4010 1) 067B4008 1)
TE 5
5/8 × 7/8 - 067B4011 -
11
1)

7/8 × 1 1/8 - 067B4034 2) -

TE 12 7/8 × 1 1/8 - 067B4023 2) 067B4021 2)
TE 20 7/8 × 1 1/8 - 067B4023 2) -
TE 55 1 1/8 × 1 3/8 - 067G4004 3)
067G4003 3)

1) ODF X ODF, 2) ODF x ODM, 3) ODM X ODM

12
ODF = Internal Diameter, ODM - External Diameter

13

Quick Selection Catalogue 11

14
Technical data and ordering
TE5 - TE 55
Orifice assembly
(kW)

Valve type Orifice no. R407F R407A R448A / R449A R404A / R507 R22 R134a R407C Code no.

MT LT MT LT MT LT MT LT MT LT MT LT MT LT

0.5 10.02 6.67 9.03 5.94 9.37 6.14 7.57 4.95 9.71 10.4 6.02 3.88 9.6 6.36 067B2788
1 18.47 12.27 16.61 10.93 17.26 11.31 13.9 9.12 17.85 19.1 11.05 7.14 17.7 11.71 067B2789
TE 5 2 25.88 17.24 23.21 15.36 24.18 15.9 19.3 12.82 24.88 26.3 15.43 10.02 24.7 16.46 067B2790
3 32.54 21.65 29.39 19.19 30.47 19.86 24.52 16.03 31.65 33.8 19.73 12.74 31.37 20.57 067B2791
4 44.54 29.01 40.06 25.75 41.7 26.61 33.43 21.64 43.19 46 26.83 17.14 42.77 27.6 067B2792
5 60.72 37.55 44.89 27.39 47.71 30.46 45.07 27.35 51.8 57.2 33.52 21.7 47.93 29.35 067B2708
TE 12 6 80.02 47.55 58.72 34.85 62.77 38.89 56.41 33.33 68.54 76.3 44.12 28.02 62.69 37.35 067B2709
7 100.3 64.15 73.4 43.2 77.82 48.85 69.42 40.2 86.17 97.8 57.36 36.63 78.3 46.31 067B2710
8 122 75.12 96.9 61.23 109.4 68.52 78.59 48.04 118.2 128 69.13 43.88 103.6 65.63 067B2771
TE 20
9 134.6 79.47 108.5 65.92 120.9 72.53 88.81 51.89 133.9 150 80.09 49.39 115.8 70.65 067B2773
10 149.6 90.13 128.1 77.23 133.1 77.9 110.3 62.84 149.2 169 95.09 56.9 136.8 82.77 067G2701
11 163 98.43 139.4 84.21 144.7 84.83 119.4 68.22 162.5 184 104.7 62.75 148.8 90.25 067G2704
TE 55
12 174 103 150.5 89.88 155.9 90.23 129.2 72.72 176.7 202 114.2 67.71 160.7 96.33 067G2707
13 209.8 123.1 181.8 107.6 188.2 107.6 155.2 86.57 214.4 245 141 82.99 194 115.3 067G2710

Rated capacity at:

MT rated condition: Evaporating Temp. te = -5 °C, Condensing Temp. tc = +40 °C, superheat=8K , Subcooling=4K
LT rated condition: Evaporating Temp. te = -25 °C, Condensing Temp. tc = +40 °C, superheat=8K , Subcooling=4K

Note: For capacity of other refrigerant please refer datasheet of the valve or Coolselector.

12 Quick Selection Catalogue

 Quick Selection Notes:
01

02

03

04

05

06

07

08

09

10

11

12

13

Quick Selection Catalogue 13

14
TGE, Thermostatic expansion valve
TGE is an innovatively designed series of thermostatic expansion connection types such as solder, flare, MIO, and ORFS, and a wide
valves for fluorinated refrigerants. variety of connection sizes.
TGE has copper connections upgraded for high-pressure applications
with tight soldering, and is available with a wide variety of

Features
TGE

Bulb and capillary tube

in stainless steel

Laser-welded stainless steel

Cylindrical bulb thermostatic element and
double diaphragm

Furnace brazed
connections Fixed orifice assembly

Dual ball sealing

Solder ODF or
Flare / MIO / ORFS
connection types
Knife-edge seal
Adjustable static superheat
setting spindle

Facts

Applications: Refrigerants: Capacity range:

• Water chillers • R410A • 2.2 – 52 TR / 8 – 182 kW
• Bus A/C • R22
• Rooftop units • R134a Benefit:
• Heat pumps • R407F • Balance port design
• Refrigerated containers and others A/C • R407A • Biflow with expansion in both directions
and other refrigeration system • R404A • Cylindrical bulb and patented bulb strap
• R507 design
Maximum working pressure: • R407C
• 46 bar / 667 psig • R32
• R290

14 Quick Selection Catalogue

 01
Technical data and ordering
TGE
02
Thermostatic Expansion Valve with fixed Orifice
Nominal
capacity Inch version
Q nom.
Refrigerant Valve type no.
Connection Solder 03
MT LT ODF × ODF Code no.
(in.)

TGE 10 6 17.11 11.06 5/8 × 7/8 067N4155

TGE 10 8 22.86 14.82 5/8 × 7/8 067N4156
TGE 10 11 34.39 22.37 5/8 × 7/8 067N4157 04
TGE 20 12.5 36.98 22.64 5/8 × 7/8 067N4159
R407C
TGE 20 16 46.14 27.98 7/8 × 1 3/8 067N4162
TGE 20 20 55.13 34.13 7/8 × 1 3/8 067N4163
TGE 40 26 73.56 44.98 7/8 × 1 3/8 067N4165 05
TGE 40 40 103.2 60.68 7/8 × 1 3/8 067N4169
TGE 10 3 9.6 6.57 3/8 × 5/8 067N2150
TGE 10 4 13.1 8.8 1/2 × 7/8 067N2152
TGE 10
TGE 10
6
6
19.15
19.15
12.85
12.85
1/2 × 5/8
1/2 × 7/8
067N2153
067N2154
06
TGE 10 6 19.15 12.85 5/8 × 7/8 067N2155
R22 TGE 10 8 25.5 17.2 5/8 × 7/8 067N2156
TGE 10 11 37.78 26.13 5/8 × 7/8 067N2157
TGE 20 12.5 38.68 24.39 5/8 × 7/8 067N2159 07
TGE 20 16 48.54 30.13 7/8 × 1 1/8 067N2162
TGE 20 20 57.83 36.95 7/8 × 1 1/8 067N2163
TGE 40 26 81.63 49.81 7/8 × 1 3/8 067N2165
TGE 10 4 15.44 10.46 1/2 × 7/8 067N3152 08
TGE 10 6 22.51 15.2 1/2 × 7/8 067N3154
TGE 10 6 22.51 15.2 5/8 × 7/8 067N3155
R410A TGE 10 8 29.92 20.32 5/8 × 7/8 067N3156
TGE 10
TGE 20
11
20
44.52
72.55
30.92
46.89
5/8 × 7/8
7/8 × 1 1/8
067N3157
067N3163
09
TGE 40 30 110.6 68.25 7/8 × 1 3/8 067N3168
TGE 10 4 7.48 4.8 1/2 × 7/8 067N5152
TGE 10 6 11.13 7.15 1/2 × 5/8 067N5153
R134A
TGE 10 8 15.11 9.75 5/8 × 7/8 067N5156 10
TGE 10 11 22.39 14.45 5/8 × 7/8 067N5157
TGE 10 6 12.75 8.186 1/2 × 7/8 067N6151
TGE 10 8 17.03 10.99 5/8 × 7/8 067N6150
R404/R507 TGE 10 11 25.17 16.56 5/8 × 7/8 067N6154 11
TGE 20 12.5 27.86 16.96 5/8 × 7/8 067N6158
TGE 20 16 34.92 21.08 7/8 × 1 1/8 067N6155

Range N = –40 → +10°C OS = 4 K

12

13

Quick Selection Catalogue 15

14
AKV, Electric expansion valves
AKV are electrically operated expansion valves designed for The AKV valves are supplied as a parts programme with separate
refrigeration plants. valve body and coil (with terminal box, cable or DIN plug).
The AKV valves are designed for use with a controller from Danfoss’ AKV has an exchangeable orifice. Refrigerants: R744, R22 / R407C,
range of ADAP-KOOL® controllers. R404A / R507, R410A, R134a, R407A, R23.

Features
AKV

The orifice assembly

is replaceable
Available with ODF solder
connections (AKV 15 and Both expansion valve
AKV 20 – straightway, and solenoid valve

Facts

Applications: Refrigerants: Capacity range:

• Traditional refrigeration • R134a • R452A • 0.2 – 114 TR / 0.8 – 404 kW
• Cold rooms • R22 • R513A
• water chiller • R23 • R744 Benefit:
• R404A • R449B • The AKV valves are supplied as a parts
Maximum working pressure: • R507 • R450A programme, as follows:
• AKV 10–1–6 PS / MWP = 52 bar /754 psig • R407A • Separate valve incl. exchangeable orifice
• AKV 10–7 PS / MWP = 42 bar / 610 psig • R407F • Separate coil
• AKV 15–1,2,3 PS / MWP = 42 bar / 610 psig • R410A • The valve requires no adjustment
• AKV 15–4 PS / MWP = 28 bar / 400 psig • R422B
• AKV 20 PS / MWP = 28 bar / 400 psig • R422D
• R448A
• R449A

16 Quick Selection Catalogue

 01
Technical data and ordering
AKV
02
Valve excluded coil
Connections
Rated capacity kW kv value
Valve type Solder ODF

R22/ R407C R134a R404A/ R507 R407C m3/h Inlet × outlet (in.) Code no. 03
AKV 10-1 1 0.9 0.8 1.1 0.01 3/8 × 1/2 068F1161
AKV 10-2 1.6 1.4 1.3 1.7 0.017 3/8 × 1/2 068F1164
AKV 10-3 2.6 2.1 2 2.5 0.025 3/8 × 1/2 068F1167
AKV 10-4 4.1 3.4 3.1 4 0.046 3/8 × 1/2 068F1170 04
AKV 10-5 6.4 5.3 4.9 6.4 0.064 3/8 × 1/2 068F1173
AKV 10-6 10.2 8.5 7.8 10.1 0.114 3/8 × 1/2 068F1176
AKV 10-7 16.3 13.5 12.5 17 0.162 1/2 × 5/8 068F1179
AKV 15-1
AKV 15-2
25.5
40.8
21.2
33.8
19.6
31.4
25.2
40.4
0.25
0.4
3/4 × 3/4
3/4 × 3/4
068F5000
068F5005
05
AKV 15-3 64.3 53.3 49.4 63.7 0.63 7/8 × 7/8 068F5010
AKV 15-4 102 84.6 78.3 101 1 1 1/8 × 1 1/8 068F5015
AKV 20-1 102 84.6 78.3 101 1 1 3⁄8 × 1 3⁄8 042H2020
AKV 20-2 163 135 125 170 1.6 1 3⁄8 × 1 3⁄8 042H2022 06
AKV 20-3 255 212 196 252 2.5 1 5⁄8 × 1 5⁄8 042H2024
AKV 20-4 408 338 314 404 4 2 1⁄8 × 2 1⁄8 042H2027

Rated capacities are based on:

Condensing temperature tc = 32°C 07
Liquid temperature tl = 28°C
Evaporating temperature te = 5°C

AKV
08
Coil
Type Description Code no.

240 V a.c. 12 W, 50 Hz with Terminal Box 018F6802

Coil 230 V a.c. 10 W, 50 Hz with Terminal Box 018F6701 09
24 V a.c. 10 W, 50 Hz with Terminal Box 018F6707

AKV
Orifice kit 10
Type Description Code no.

Orific.kit AKV(H)10-0,1,2,3 multi 10/180 068F5283

Orifice kit Orifice Kit AKV(H) 10-4,5,6 multi 10/180 068F5284
Orifice kit AKV-10-7,8 multi 10/180 068F5285 11

12

13

Quick Selection Catalogue 17

14
ETS 6, Electric expansion valve
ETS 6 are compact and lightweight electric expansion valves. With a Danfoss EKE 1A, EKE 1B, EKE 1C and EIM 336 (current drivers)
Bi-flow operation is possible for heat pump systems. and an AKS sensor, an accuracy better than ± 0.5 K can be obtained.
The valve operation is by means of a unipolar motor, which can be
controlled by a number of controllers from Danfoss or third party
vendors.

Features
ETS 6

Permanent
magnet motor

Coil

Needle valve Inlet

Body

Outlet

Cross section diagram of ETS 6 series

* Refers to refrigerant flow in cooling mode

Facts

Applications: Refrigerants: Benefit:

• Heat pumps • R134a • Compact and lightweight hermetic design
• Modular air-cooled chillers • R22 with removable coil
• VRF • R407C • Bi-flow operation for reversible systems
• Multi split • R404A • Power saving design that enables energy
• Inverter mini split • R507 efficiency with precison flow control
• Bus air conditioning • R410A
• IT cooling
Capacity range:
Maximum working pressure: • 0.11 – 6.56 TR / 0.42 – 23.1 kW
• 47 bar / 681 psig

18 Quick Selection Catalogue

 01
Technical data and ordering
ETS 6
02
Valve excl. coil
Rated capacity (kW) Connection (ODF X ODF) Code no.
Type
R410A R407C R22 R134a R404A/ R507 in. mm Straight away

ETS 6-10 3.1 2.7 2.6 2 1.8 - 7.94 X 7.94 034G5005 03

ETS 6-14 6.8 5.9 5.8 4.5 4.1 - 7.94 X 7.94 034G5015
ETS 6-18 12.1 10.6 10.3 8.1 7.3 - 6.35 X 6.35 034G5026
ETS 6-25 23 20.1 19.6 15.3 13.8 - 7.94 X 7.94 034G5035
ETS 6-32 29.6 29.6 28.8 22.5 20.3 - 7.94 X 7.94 034G5055
04
ETS 6 rated capacity on:
Evaporating temperature te : 5°C (40°F), Condensing temperature tc : 38°C (90°F), Subcooling= 0°C, superheat= 0°C

ETS 6 05
Coil
Type Description Code no.

12 VDC (0.26A / phase) with JST XHP-6 connector 034G5105

Coil
12 VDC (0.26A / phase)with JST XHP-5 connector 034G5115 06

07

08

09

10

11

12

13

Quick Selection Catalogue 19

14
ETS 12.5 – ETS 400, Electric expansion valves
ETS 12.5 - ETS 400 are electric expansion valves for precise liquid ETS valves are operated with a current or voltage driver such as
injection in evaporators for air conditioning and refrigeration Danfoss Controllers EKE 1A, EKE 1B, EKE 1C.
applications. ETS valve is compatible with all common refrigerant such as R410A,
The valve piston and linear positioning design is fully balanced, R407C, R404A, R134a, R22 and R507.
providing bi-flow feature as well as solenoid tight shut function in Special ETS versions for systems with R744 (CO2) are available.
both flow directions.

Features
ETS 12.5 - 400

Actuator with low energy

consumption

Built-in sight glass

ETS 50 – ETS 400

Tight on shut-off,
Precise positioning for no solenoid valve
optimum control of needed
liquid injection
Balanced piston design
removes need to hold current
and prevents step loss.

Facts

Applications: Refrigerants: Capacity range:

• Heat pumps • R1234ze • R449A • 12.2 – 556 TR / 43 – 1933 kW
• Refrigeration • R134a • R450A
• Air conditioning • R22 • R452A Benefit:
• Chillers • R404A • R507 • Balanced design (ETS 12.5 - ETS 400)
• R407A • R513A providing bi-flow operation as well as
Maximum working pressure: • R407C solenoid tight shut-off function in both
• ETS 12.5, ETS 25, ETS 50, ETS 100: • R407F flow directions
45.5 bar / 660 psig • R410A • Precise positioning for optimum control of
• ETS 250, ETS 400: 34 bar / 493 psig • R422B liquid injection
• R422D • Equipped with M12 connector for
• R438A cable connection (cable and connector
• R448A assemblies as accessories)

20 Quick Selection Catalogue

 01
Technical data and ordering ETS 12.5 / ETS 25
without sight glass
ETS 50 / ETS 100
with sight glass
ETS 250 / ETS 400
with sight glass

ETS 12.5 - ETS 400

02
Valve included actuator
Rated capacity (kW) Connection (ODF X ODF) Code no.
Type
R410A R407C R22 R134a R404A/ R507 in. mm Straight away

70 63 57 45 43 1/2 x 1/2 - 034G4209 03

ETS 12.5 70 63 57 45 43 5/8 × 5/8 16 × 16 034G4210
70 63 57 45 43 7/8 × 7/8 22 × 22 034G4211
144 129 117 93 88 5/8 × 5/8 16 × 16 034G4202
ETS 25
144 129 117 93 88 7/8 × 7/8 22 × 22 034G4203
04
262.3 240.5 215 170 161.4 7/8 × 7/8 22 × 22 034G1708
262.3 240.5 215 170 161.4 7/8 × 7/8 22 × 28 034G1705
ETS 50
262.3 240.5 215 170 161.4 1 1/8 × 1 1/8 28 × 28 034G1706
262.3 240.5 215 170 161.4 1 1/8 × 1 3/8 28 × 35 034G1704
488.4 447.8 400.4 316.5 300.5 1 1/8 × 1 1/8 28 × 28 034G0507
05
ETS 100 488.4 447.8 400.4 316.5 300.5 1 3/8 × 1 3/8 35 × 35 034G0508
488.4 447.8 400.4 316.5 300.5 1 5/8 × 1 5/8 - 034G0505
- 1212 1106 874 828 1 1/8 × 1 1/8 28 × 28 034G2600
ETS 250 - 1212 1106 874 828 1 3/8 × 1 3/8 35 × 35 034G2601 06
- 1212 1106 874 828 1 5/8 × 1 5/8 - 034G2602
- 1933 1764 1394 1320 1 5/8 × 1 5/8 - 034G3500
ETS 400
- 1933 1764 1394 1320 2 1/8 × 2 1/8 54 × 54 034G3501

ETS 12.5 - ETS 400 Rated capacity is based on: 07

Evaporating temperature te : 5°C (40°F) , Liquid temperature tl : 28°C (82°F) , Condensing temperature tc : 32°C (90°F)
Full stroke opening in normal flow direction
ETS 50, 100, 250, 400 have integrated sight glass.

08
ETS 12.5 - ETS 400
Cable
Code no.
Temperature
09
Type Cable quality Cable length (L) Design
range
Single pack

2m 6.6 ft M12 actuator connector to 4 flying wires for driver 034G2201

Cable –50 / +80°C –50 / +80°C
8m 26.2 ft connection 034G2323

10

11

12

13

Quick Selection Catalogue 21

14
EVR version 2, Solenoid valves
EVR solenoid valves are direct ot servo operated solenoid valves for EVR 2 - EVR 22 with solder connections and without manual stem are
liquid, suction and hot gas lines with most refrigerants, inlcuding suitable for the flammable refrigerants R152A, R32, R290, R600, R600a,
flammable refrigerants. They are suitable for condensing units R1234yf and R1234ze.
and power packs in all refrigeration, freezing and air conditioning The valves can be delivered as normally open or normally closed
applications and are compatible with fluorinated refrigerants R22/ valves and with or without manual operation.
R407C, R134a, R404A/R507, R410A, R407A, R32, R290, R600, R600a, EVR valves are available with flare, solder or flange connections.
R1234yf, R1234ze, R404A, R407F, R152A, R448A, R449A, R452A and
R450A.

Features
EVR version 2

Drawn stainless steel tube

with internal armature top for
"Clip on" coil system for maximum external tightness
quick and easy mounting

Spring damping to increase

the lifetime of the seat plate
Coil with terminal box,
1 m cable or DIN plug

Stainless steel armature

Forged brass body for maximum

external tightness

Extended ends for soldering

make installation easy

Teflon seat plate with cardan effect to

secure maximum internal tightness

Facts

Applications: Refrigerants: Temperature range:

• Traditional refrigeration • R22 • R404A • -40 – 105 °C / -40 – 221 °F
• Heat pump systems • R407C • R407F
• Air conditioning units • R134a • R125 Benefit:
• Liquid coolers • R404A • R152A • High reliability and durability due to
• Transport refrigeration • R507 • R448A maximum internal and external tightness.
• R410A • R449A • MOPD up to 38 bar / 550 psi
Maximum working pressure: • R407A • R452A
• EVR solder and flare connections • R32 • R450A
45.2 bar / 655 psi • R290 • R1234yf
• R600 • R1234ze
• R600a

22 Quick Selection Catalogue

 01
Technical data and ordering Solder connection Flare connection

EVR version 2
02
Normally Closed (NC) - separate valve bodies
Code no. Code no.
Connection size Manual operation
Type Coil voltage Solder Kv value (m³/h) Flare
(in.) Solder
Normally Close
(NC)
Normally Close
(NC) 03
EVR 2 AC / DC 1⁄4 032F1201 No 0.15 032F8056
AC / DC 1⁄4 032F1206 No 0.26 032F8107
EVR 3
AC / DC 3⁄8 032F1204 No 0.26 032F8116
AC / DC 3⁄8 032L1212 No 1 032L8072 04
AC / DC – 032L1213 No 1 -
EVR 6
AC / DC – 032L1236 No 1 -
AC / DC 1⁄2 032L1209 No 1 032L8079
AC / DC 3⁄8 032L7125 No 1.47 -
05
AC / DC – 032L1218 No 2.2 -
EVR 10
AC / DC 1⁄2 032L1217 No 2.2 032L8095
AC / DC 5⁄8 032L1214 No 2.2 032L8098
AC / DC 5⁄8 032L1228 No 3.3 -
EVR 15 AC / DC 5⁄8 032L1227 Yes 3.3 032L8101
06
AC / DC 7⁄8 032L1225 No 3.3 -
AC / DC 7⁄8 032L1240 No 6 -
EVR 20 AC / DC 7⁄8 032L1254 Yes 6 -
AC / DC 1 1⁄8 032L1244 No 6 - 07
AC / DC 1 1⁄8 032L7145 No 6 -
EVR 22
AC / DC 1 3⁄8 032L3267 No 6 -
AC / DC 1 1⁄8 032L2200 Yes 9.8 -

EVR 25
AC / DC 1 1⁄8 032L2201 No 9.8 - 08
AC / DC 1 3⁄8 032L2207 Yes 9.8 -
AC / DC 1 3⁄8 032L2208 No 9.8 -
AC / DC 1 3⁄8 032L1105 Yes 16.7 -
AC / DC 1 3⁄8 032L1106 No 16.7 -
EVR 32 AC / DC 1 5⁄8 032L1103 Yes 16.7 -
09
AC / DC 1 5⁄8 032L1104 No 16.7 -
AC / DC 2 1⁄8 032L1181 Yes 16.7 -
AC / DC 1 5⁄8 032L1109 Yes 24.2 -

EVR 40
AC / DC 1 5⁄8 032L1110 No 24.2 - 10
AC / DC 2 1⁄8 032L1111 Yes 24.2 -
AC / DC 2 1⁄8 032L1112 No 24.2 -

11

12

13

Quick Selection Catalogue 23

14
Technical data and ordering
Solenoid coils
BE solenoid coil with terminal box IP67
Power consumption
Supply Voltage
Tambient Frequency
Type Valve type voltage variation Code no.
(°C) (Hz)
(V) (%) W VA

BE012AS -40T80 12 -15, +10 50 10 18 018F6706

BE024AS -40T80 24 -15, +10 50 12 21 018F6707
BE042AS -40T80 42 -15, +10 50 10 21 018F6708
EVR 2 – EVR 40 (NC)
BE048AS EVR 6 – EVR 22 (NO) -40T80 48 -15, +10 50 10 21 018F6709
EVRH 10 – EVRH 40
BE115AS EVRC -40T80 115 -15, +10 50 11 19 018F6711
BE230AS EVRA -40T80 230 -15, +10 50 12 22 018F6701
EVRAT
BE230AS EVRS / EVRST -40T80 220 -15, +10 50 11 19 018F6701
EVM (NC)
BE240AS -40T80 240 -15, +10 50 11 19 018F6702
BE440CS -40T80 380 - 400 -15, +10 50 13 23 018F6703
BE440CS -40T80 380 - 400 -15, +10 50 / 60 14 24 018F6703

24 Quick Selection Catalogue

 Quick Selection Notes:
01

02

03

04

05

06

07

08

09

10

11

12

13

Quick Selection Catalogue 25

14
EV220B, Solenoid valves
EV220B 15 – EV220B 50 is a universal indirect servo-operated 2/2-way Built-in pilot filter as standard, adjustable closing time and enclosures
solenoid valve program. Valve body in brass, dezincification resistant up to IP67 ensures optimal performance even under critical working
brass and stainless steel ensures that a broad variety of application conditions.
can be covered.

Features
EV220B

Wide coil range up

to IP67

Effective against
water hammer

High capacity across the

entire pressure range
High capacity across the
entire pressure range

Broad temperature
and material range

Insensitive to dirt

Facts

Benefit: • Built in filter for protection of pilot system

• 2/2-way • Water hammer damped
• Servo-operated • Adjustable closing time available
• DN 15 – DN 50 • Nominal pressure PN 16
• Valve body available in brass, DZR brass, • Wetted parts: brass, stainless steel, copper,
gun metal or stainless steel tin, EPDM, FKM or NBR rubber
• NC and NO versions
• ISO 228/1 or NPT thread connection (EVSI
and EVSI-U)

26 Quick Selection Catalogue

 01
Technical data and ordering
EV220B 02
Servo-operated 2/2-way solenoid valves
Connection ISO228/1 Seal material Orifice size Kv - value (m³/h) Differential pressure Media temperature Code no.

EPDM 10 1.5 0.1 - 20 -30 - 100 032U1251

G½
EPDM 12 2.5 0.3 - 10 -30 - 100 032U1256 03
EPDM 15 4 0.3 -16 -30 - 120 032U7115
NBR 15 4 0.3 -16 -10 - 90 032U7170
EPDM 20 8 0.3 -16 -30 - 120 032U7120
G¾

04
NBR 20 7.5 0.3 -16 -10 - 90 032U7171
G1 EPDM 25 11 0.3 -16 -30 - 120 032U7125
G1¼ EPDM 32 18 0.3 -16 -30 - 120 032U7132
G1½ EPDM 40 24 0.3 -16 -30 - 120 032U7140
G2 EPDM 50 40 0.3 -16 -30 - 120 032U7150
05
EPDM is recommended for water.
NBR is suitable for oil, water and air.

EV220B
Coils & accessories 06
Type Description Code no.

BA024A 24V 50HZ 042N7508

Coil
BB024D 24V DC
BB230CS 230V 50/60HZ
042N7457
018F7363
07
BA024D 24V DC 042N7551
BA240A 240V 50HZ 042N7502
Cable Plug PG11 042N0156
08
EV220B
Spares
Type Seal Material Code no.
09
EV220B 15 EPDM 032U1071
EV220B 15 FKM 032U1072
EV220B 25 EPDM 032U1075

Contents for Kit: 10

Locking button and nut for the coil
Armature with valve plate and spring
O-ring for the armature tube
2 O-rings for the equalizing orifice
Spring and diaphragm
2 O-rings for the pilot system
11

12

13

Quick Selection Catalogue 27

14
KP, Pressure switch
KP pressure switches are designed to protect refrigeration systems The enhanced contact system for 16 A makes it possible to operate
from excessively high discharge pressures, excessively low suction electrical motors up to 2 kW directly, without the use of contactors.
pressures, to start / stop compressors or to operate fans of aircooled KP pressure switches are available in IP30 and IP44 enclosures.
condensers. Versions of KP are available for applications with HCFC and
non-flammable HFC refrigerants, ammonia or hydrocarbons.

Features
KP

Available with manual and

automatic reset

Compact design

Vibration proof

Range and differential High contact rating:

easily adjustable with AC-1 / AC-3: 16 A @ 400 V
screwdriver AC-15: 10 A @ 400 V

Manual trip function Reliable and fully visible

SPDT contact system

Bellows without any welding points.

Fail safe bellows versions available

Various pressure
connections

Facts

Applications: Refrigerants: Benefit:

• Food Retail • R All HCFC and non-flammable HFC • High reliability both electrically and
• Heavy Commercial Refrigeration refrigerants mechanically-a KP switch can be
• Light Commercial Refrigeration connected directly to a single-phase
• Commercial Air Conditioning AC motor of up to approximately 2 kW
• Food Processing Working range: or installed in the control circuit of DC
• Storage • -0.9 – 46.5 bar / -1.3 – 674 psi motors and large AC motors
• Versions with IP30 enclosure rating can be
updated to IP44 or IP55 enclosure rating
using top plate (IP44) or IP55 enclosure
(IP55), available as accessories

28 Quick Selection Catalogue

 01
Technical data and ordering
KP 02
Pressure Control for Fluorinated refrigerants
Low pressure (LP) High pressure (HP) Reset Code no.
Contact
Pressure Type
Regulating Differential Regulating Differential Low pressure High pressure system 1/4 in.
range (bar) Δp (bar) range (bar) Δp (bar) (LP) (HP) 6 mm Flare 03
Low KP 1 –0.2 - 7.5 0.7 - 4 - - Aut. - SPDT 060-110191
Low KP 1 –0.9 - 7 0.7 - - Man. - SPDT 060-110366
High KP 5 - - 8 - 32 1.8 - 6.0 - Aut. SPDT 060-117191
High KP 5 - - 8 - 32 3 - Man. SPDT 060-117391 04
Dual KP 15 –0.2 - 7.5 0.7 - 4 8 - 32 4 Aut. Aut. SPDT + LP 060-124191
Dual KP 15 –0.2 - 7.5 0.7 - 4 8 - 32 4 Aut. Man. SPDT + LP 060-124391
Dual KP 15 –0.2 - 7.5 0.7 - 4 8 - 32 4 Aut. Man. SPDT + LP+HP 060-126491
Dual KP 15 –0.2 - 7.5 0.7 - 4 8 - 32 4 Conv. Conv. SPDT + LP+HP 060-115491
05
KP
Parts & accessories
Type Description Code no. 06
Wall Bracket Flat 060-105566
Mounting Brackets
Angle Bracket 060-105666
Capillary (inc 1/4" flare nuts) 1 metre capillary with flare nuts 060-019166

IP55 Enclosure
Single for KP1, KP5, KPR5 060-033066
07
Double for KP15, KP17 060-035066
KP1 Auto incl. capillary and angle bracket 060-110566

OEM KP Controls KP5 Auto incl. capillary and angle bracket 060-001891
(including capillary and bracket) KP15 A/Auto incl. capillary and angle bracket 060-119991
KP15 A/Auto incl. capillary and angle bracket 060-000791
08
KPR5 HP Control (condensor fan control) KPR5 Auto 1/4 flare 060-117466
KP6W Auto 1/4 flare 8 – 42 bar, IP44 060-519091
KP6W 8- 42 bar range (CO2 & R410A)
KP6B Manual 1/4 flare 8 – 42 bar, IP30 060-519191
09

10

11

12

13

Quick Selection Catalogue 29

14
KP, Thermostat
KP thermostats are single-pole, double-throw (SPDT) KP thermostats are used primarily for regulation, but also for safety
temperature-operated electric switches. monitoring systems, and are available with vapour charge or with
KP thermostats can be connected directly to a single-phase AC adsorption charge. With vapour charge the differential is very small.
motor of up to approximately 2 kW or installed in the control circuit KP thermostats with adsorption charge are widely used to give frost
of DC motors and large AC motors. protection.

Features
KP

Sensor

Available with manual

and automatic reset

Vibration proof
Setting knob
High contact rating:
AC-1 / AC-3: 16 A at 400 V
AC-15: 10 A at 400 V

Compact design

Reliable and fully visible SPDT

Bellows without any contact system
welding points

Facts

Applications: Benefit:
• Frost protection • Available with capillary sensor, air sensor
• Defrost control or cylindrical pocket sensor
• Case and Room control • Different sensing elements - As experts
in charging technologies Danfoss offers
temperature switches that operate in a
wide temperature range
• Available with vapour charge or with
adsorption charge

30 Quick Selection Catalogue

 01
Technical data and ordering
KP 02
Temperature Control - Thermostats
Differential Δt
Max. Sensor Capillary tube
Setting range temp. HP length
Charge Type Sensor type Reset Code no.
(°C ) Lowest temp. Highest temp.
(°C ) (°C )
(°C ) (m) 03
KP 61 A -30 – 15 5.5 – 23 1.5 – 7 Aut. 120 2 060L110066
KP 63 B -50 – -10 10 – 70 2.7 – 8 Aut. 120 2 060L110866
Vapour
KP 68 C1 -5 – 35 4.5 – 25 1.8 – 7 Aut. 120 - 060L111166
KP 69 B -5 – 35 4.5 – 25 1.8 – 7 Aut. 120 2 060L111266 04
KP 71 E2 -5 – 20 3 – 10 2.2 – 9 Aut. 80 2 060L111366
KP 73 E1 -25 – 15 12 – 70 8 – 25 Aut. 80 2 060L111766
Absorbtion KP 73 D1 -25 – 15 3.5 – 20 3.25 – 18 Aut. 80 2 060L114366
KP 75
KP 77
F
E3
0 – 35
20 – 60
3.5 – 16
3.5 – 10
2.5 – 12
3.5 – 10
Aut.
Aut.
110
130
2
2
060L112066
060L112166
05

KP
Thermostat sensor types
A B C D E F
06

D1: ø10 × 85 mm
07
double contact remote E1: ø6.4 × 95 mm
sensor remote sensor
C1: ø40 × 30 mm air coil
ø9.5 × 70 mm D2: ø16 × 170 mm E2: ø9.5 × 115 mm ø25×125 mm
Straight capillary tube C2: ø25 × 67 mm air coil
remote air coil double contact remote remote sensor remote duct coil
(integral with thermostat)
sensor E3: ø9.5 × 85 mm
Note! Cannot be used
in sensor pocket
remote sensor 08

09

10

11

12

13

Quick Selection Catalogue 31

14
077B, Thermostat
077B thermostats have NC (Normally Closed) main contacts; i.e. they reinforced product performance by metering over 1,000,000
cut out the compressor current circuit on decreasing temperature. cycles. 077B thermostats are designed for temperature control in
077B thermostats are designed to operate at least 300,000 cycles refrigerators and freezers and can be used as an evaporator or a room
at full load (6/36A and 8/40A respectively); internal quality audits thermostat.

Features Capillary tube / sensor

077B Thermostat

Spindle for setting knob

Connector for central

mounting w/nut

Earth tabs: 6.3 × 0.8 mm

and 4.8 × 0.8 mm
Welded bellows element

Positive force contact

system: 6 (36)A / 8 (40)A

Connection tabs:
6.3 × 0.8 mm / 4.8 × 0.8 mm / mix

Cover plate for laser marking: Type ID / code numbers / manu-

facturing date / temperature settings / data matrix

Facts

Application: • World class quality with high CpK values specific applications and geographical
• Refrigerators that ensures a long and trouble-free markets
• Upright and chest freezers lifetime • Danfoss Appliance Controls are certified
• Liquid and bottle coolers • Available with Enclosed Brake Device by Bureau Veritas in ISO14001, ISO9001 and
• Small commercial refrigeration (EBD) for use in household appliances OHSAS18001
charged with hydrocarbon gases such as
R600a or R290
• Available with a wide range of standard
functions, various extra functions and
accessories
• Available with 6.3 × 0.8 mm, 4.8 × 0.8 mm
terminals or a combination
• Approved by recognized authorities for

32 Quick Selection Catalogue

 01
Technical data and ordering
077B 02
Service thermostats
Temperatures (°C) Accessories Capillary
Warm pos. Cold pos. tube
Application No. Small Push- Mounting Seal Small Remarks Code no.
cut-in / cut cut-in / cut Signal Defrosting Washer length
knob button bracket cap parts (m)
Refrigerators 1
out
2 / -5.5
out
-13.5 / -25 *) – – x x – x – x 1.3 – 077B7001 1) 03
Refrigerators
with
2 0 / -7.5 *) -11 / -21 – 6 x x x x – x 1.3 – 077B7002
pushbutton
defrost
Refrigerators
with
automatic
3 3.5 / -11 3.5 / -27.5 *) – – x x – x – x 1.6
With
auxillary 077B7003 1) 04
switch
defrost
With
Absorption
4 3.5 / -1 *) -5 / -11 – – x x – x – x 1.5 auxillary 077B7004 1)
refrigerators
switch
Ice-cream
cabinets
5 -7.5 / -15 -21 / -32.5 *) – – – x – x x x 2.3 – 077B7005 1)
05
and freezers
without signal
With
Freezers with
6 -10 / -17 *) -24 / -34.5 -6 *) – – x – x x x 2.3 active 077B7006 1)
active signal
signal

Freezers with
7 -10 / -17 *) -24 / -34.5 -6 *) – – x – x x x 2.3
With
passive 077B7007
06
passive signal
signal
Bottle and
8 11.5 / 6 *) -1 / -8.5 – – x x – x x x 2.0 – 077B7008 1)
liquid coolers

*) Adjustment position
1
) With EBD (from January 2017) 07

08

09

10

11

12

13

Quick Selection Catalogue 33

14
KVR / NRD, Condensing pressure regulator /
Differential pressure valve
KVR condensing pressure regulator valves can be mounted on They are used to maintain a constant and sufficiently high
either the gas or liquid side of the condenser in refrigeration and air condensing pressure with systems using air-cooled condensers.
conditioning systems. KVR condensing pressure regulators can also be used with valve
types NRD or KVD to assure that adequate pressure is maintained on
the receiver.

Features
KVR / NRD

Accurate, adjustable pressure

regulation with allen key

"Hermetic" brazed construction

Stainless steel bellows

Compact angle design for easy

installation in any position

Pulsation damping design

1
⁄4 in Schrader valve to
set the pressure

Available with flare and

ODF solder connections

Facts

Applications: Refrigerants: Capacity range:

• Traditional refrigeration • R1270 • R448A • 3.4 – 40 TR /12 - 140 kW based on liquid or
• Air conditioning units • R134a • R449A hot gas
• transport refigeration • R22 • R450A
• R290 • R452A Benefit:
Maximum working pressure: • R404A • R507A • The regulators are the most compact on
• KVR: PS / MWP = 28 bar / 406 psig • R407A • R513A the market
• NRD: PS / MWP = 46 bar / 667 psig • R407C • R600 • Reliable design and very easy to adjust
• R407F • R600a • KVR can be installed either in discharge
• R422B • R1234ze line or liquid line
• R422D

34 Quick Selection Catalogue

 01
Technical data and ordering
KVR / NRD 02
Condensing pressure regulator / Differential pressure valve
Evaporator capacity
Solder,
ODF connection 3)
Rated liquid capacity in kW 1) Rated hot gas capacity in kW 1)
Type Code no.

R22 R134a
R404A /
R407C R22 R134a
R404A /
R407C in. mm
03
R507 R507

KVR 12 50.4 47.3 36.6 54.4 13.2 11.6 12 14.3 1/2 - 034L0093
KVR 15 50.4 47.3 36.6 54.4 13.2 11.6 12 14.3 5⁄8 16 034L0097
KVR 22 50.4 47.3 36.6 54.4 13.2 11.6 12 14.3 7⁄8 22 034L0094
04
KVR 28 129 121 93.7 139.3 34.9 30.6 34.9 37.7 1 1⁄8 - 034L0095
KVR 35 129 121 93.7 139.3 34.9 30.6 34.9 37.7 1 3⁄8 35 034L0100
NRD - - - - - - - - 1/2 - 020-1132

1) Rated capacity is based on:

– evaporating temperature te = -10 °C / 14 °F
05
– condensing temperature tc = 30 °C / 110 °F
– pressure drop across the valve Δp = 0.2 bar / 3 psi for liquid capacity, Δp = 0.4 bar / 6 psi for hot gas capacity, offset = 3 bar / 45 psi
2) KVR are delivered without flare nuts. Separate flare nuts can be supplied: 1⁄2 in / 12 mm - code no. 011L1103, 5⁄8 in / 16 mm – code no. 011L1167. 3
3) The connection dimensions chosen must not be too small, as gas velocities in excess of 130 ft/s at the inlet of the regulator can give flow noise.
To select the product for other conditions or refrigerants, use Danfoss Coolselector®2. 06

Application example
Application example 07

08

09

10

11

12

13

Quick Selection Catalogue 35

14
KVP, Evaporator pressure regulator
KVP evaporating pressure regulators are mounted in the suction line They also protect against too low an evaporating pressure by
of refrigeration and air conditioning systems. throttling down when the pressure falls below the set value.
They are used to maintain a constant pressure corresponding to
a constant temperature on the evaporator.

Features
KVP

Accurate, adjustable pressure

regulation with allen key

"Hermetic" brazed construction

Stainless steel bellows

Compact angle design for easy

installation in any position

Pulsation damping design

1
⁄4 in Schraeder valve
for setting the pressure

Available with flare and

ODF solder connections

Facts

Applications: Refrigerants: Capacity range:

• Traditional refrigeration • R1270 • R449A • 0.9 – 2.6 TR /2.8 – 7.9 kW
• Air conditioning units • R134a • R450A
• Cold rooms • R22 • R452A Benefit:
• Display cabinets • R290 • R507A • Wide capacity and operating range.
• R404A • R513A • Protection against a too low evaporating
Maximum working pressure: • R407A • R600 pressure: the regulator closes when the
• 18 bar / 260 psig • R407C • R600a pressure in the evaporator falls below the
• R407F • R1234ze set value
• R422B • The KVP can be used to differentiate
• R422D the evaporating pressures in two or
• R448A more evaporators in systems with one
compressor

36 Quick Selection Catalogue

 01
Technical data and ordering
KVP 02
Evaporator pressure regulator
Rated hot gas capacity in Solder,
Rated capacity in kW 1)
kW 1) ODF connection
Type Code no. Code no.

R22 R134a R404A/R507 R407C in. mm in. mm 03

4 2.8 3.6 3.7 1/2 12 034L0021 1/2 - 034L0023
KVP 12
4 2.8 3.6 3.7 - - - - 12 034L0028
KVP 15 4 2.8 3.6 3.7 5⁄8 16 034L0022 5⁄8 16 034L0029
KVP 22 4 2.8 3.6 3.7 - - - 7⁄8 22 034L0025
04
KVP 28 8.6 6.1 7.7 7.9 - - - 1 1/8 034L0026
KVP 35 8.6 6.1 7.7 7.9 - - - 1 3/8 35 034L0032

1) Rated capacity is the capacity of the regulator at

– Evaporating temperature te = –10 °C,
05
– Condensing temperature tc = +25 °C
– Pressure drop in regulator Δp = 0.2 bar, offset = 0.6 bar
2) Supplied without flare nuts. Separate flare nuts can be supplied:
½ in./12 mm, code no. 011L1103, 5⁄8 in./16 mm, code no. 011L1167.
06

Application example

07

08

09

10

11

12

13

Quick Selection Catalogue 37

14
KVL, Crankcase pressure regulator
KVL crankcase pressure regulators valves are installed in the suction KVL protects the compressor motor against overload during start-up
line ahead of the compressor. after long standstill periods or after defrost periods
(high pressure in evaporator).

Features
KVL

Accurate, adjustable pressure

regulation with allen key

"Hermetic" brazed construction

Stainless steel bellows

Pulsation damping design

Compact angle design for easy

installation in any position

Available with flare and

ODF solder connections

Facts

Applications: Refrigerants: Capacity range:

• Traditional refrigeration • R1270 • R449B • 5.3 – 16.4 kW
• Air conditioning units • R134a • R450A
• Transport refrigeration • R22 • R452A Benefit:
• R290 • R507A • Wide capacity and operating range
Maximum working pressure: • R404A • R513A • Protects the compressor against electrical
• 18 bar / 260 psig • R407A • R600 mootr overloading
• R407C • R600a
• R407F • R1234ze
• R407H • R454C
• R422B • R455A
• R422D • R515B
• R448A • R516A
• R449A

38 Quick Selection Catalogue

 01
Technical data and ordering
KVL 02
Crankcase pressure regulator
Flare Solder,
Rated capacity in kW 1)
connection 2) ODF connection
Type Code no. Code no.

R22 R134a R404A/R507 R407C in. in. 03

KVL 12 7.1 5.3 6.3 6.4 1/2 034L0041 1/2 034L0043
KVL 15 7.1 5.3 6.3 6.5 5⁄8 034L0042 5⁄8 034L0049
KVL 22 7.1 5.3 6.3 6.5 - - 7⁄8 034L0045
KVL 28 17.8 13.2 15.9 16.4 - - 1 1/8 034L0046
04
KVL 35 17.8 13.2 15.9 16.4 - - 1 3/8 034L0052

1) Rated capacity is the capacity of the regulator at

– Evaporating temperature te = –10 °C,
– Condensing temperature tc = +25 °C 05
– Pressure drop in regulator Δp = 0.2 bar, offset = 0.6 bar
2) Supplied without flare nuts. Separate flare nuts can be supplied:
½ in. /12 mm, code no. 011L1103, 5⁄8 in. /16 mm, code no. 011L1167.

06
Application example
Application example

07

08

09

10

11

12

13

Quick Selection Catalogue 39

14
DML, Hermetic filter drier (Liquid line filter)
DML hermetic filter driers are optimised for refrigerants with mineral The filter driers are delivered with flare or copper / copper plated
or benzene oils. steel connections.
The filter driers are hermetic and approved for up to 46 bar,
depending on type.

Features
DML

One piece plasma welded Spring to keep core

shell– less risk of refrigerant loss in fixed position

Inlet
Powder painted surface
to prevent corrosion High dirt retention, down to
25 µm particles, with minimal
pressure drop

Perforated plate – to keep

internal parts in position ELIMINATOR® core for
optimal drying capacity

Pure copper, copper plated steel,

flare and face seal connectors Polyester mat protecting core
available from breaking up due to vibration

Outlet

Facts

Applications: Refrigerants: Connections:

• Traditional refrigeration • R22 • R1234ze • Available in flare, solder
• Air conditioning units • R32 • R407f
• R134a • R290 Benefit:
Maximum working pressure: • R404A • R452A • Corrosion reistant powder-painted finish
• Up to 46 bar / 667 psig • R410A • R444B
• R407C • R449A
Size: • R23 • R448A
• Wide range from 1.5 - 75 cubic inches • R600 • R450A
• R600a
• R744
• R1234yf

40 Quick Selection Catalogue

 01
Technical data and ordering
Flare Solder (pure copper)
02
DML
Hermetic filter drier
Liquid capacity (kW) Code no.
Size Size
Type
(in.) (mm)
R134a R404A R507 R22 R407C R410A R32 Flare Solder 03
DML 032/032s 1⁄4 6 6.7 5.01 4.86 7.45 7.09 7.43 10.86 023Z503591 023Z504891
DML 033/033s 3⁄8 10 12.85 9.86 9.57 14.46 13.84 14.67 21.4 023Z503691 023Z505091
DML 052/052s 1⁄4 6 7.67 5.62 5.45 8.45 8.02 8.32 12.18 023Z503791 023Z505391
DML 053/053s 3⁄8 10 12.87 9.81 9.52 14.44 13.8 14.58 21.28 023Z503891 023Z505491 04
DML 082/082s 1⁄4 6 7.68 5.44 5.27 8.32 7.85 8.02 11.77 023Z503991 023Z505791
DML 083/083s 3⁄8 10 14.19 10.98 10.66 16.03 15.37 16.35 23.85 023Z504091 023Z505891
DML 084/084s 1⁄2 12 28.61 21.33 20.68 31.76 30.24 31.63 46.24 023Z504191 023Z506191
DML 085/085s 5⁄8 16 43.81 35.32 34.33 50.47 48.71 52.83 76.81 023Z507391 023Z507291
DML 162/162s 1⁄4 6 7.68 5.43 5.26 8.31 7.85 8.01 11.75 023Z504291 023Z506391
05
DML 163/163s 3⁄8 10 16.33 11.18 10.82 17.41 16.33 16.43 24.16 023Z504391 023Z506491
DML 164/164s 1⁄2 12 32.19 23.54 22.81 35.4 33.6 34.83 50.99 023Z504491 023Z506791
DML 165/165s 5⁄8 16 44.64 36.59 35.59 51.82 50.16 54.83 79.63 023Z504591 023Z506891
DML 166/166s 3⁄4 19 45.53 37.37 36.35 52.89 51.2 56.01 81.33 023Z504691 023Z507191 06
DML 303/303s 3⁄8 10 15.7 10.56 10.2 16.59 15.52 15.48 22.79 023Z0049 023Z0067
DML 304/304s 1⁄2 12 32.51 25 24.26 36.63 35.06 37.19 54.26 023Z0050 023Z0068
DML 305/305s 5⁄8 16 45.71 36.96 35.93 52.72 50.91 55.29 80.38 023Z0051 023Z0069
DML 306/306s 3⁄4 19 43.73 39.89 38.95 53.22 52.49 60.57 87.22 023Z0193 023Z0070
07
DML 414/414s 1⁄2 12 33.39 26.45 25.7 38.15 36.7 39.48 57.48 023Z0109 023Z0111
DML 415/415s 5⁄8 16 55.48 41.84 40.58 61.92 59.08 62.11 90.74 023Z0110 023Z0112

08

09

10

11

12

13

Quick Selection Catalogue 41

14
DAS, Hermetic burn-out filter drier
DAS ELIMINATOR® hermetic burn-out filter driers are used in the The solid core, which is composed of 70% activated alumina and
suction line to clean up refrigeration and air conditioning systems 30% Molecular Sieve, adsorbs harmful acids as well as moisture,
with flourinated refrigerants after a compressor motor burn-out. in order to protect the new compressor against failure.

Features
DAS

2 Schrader access valves

to measure pressure
drop across the drier

Solid core with 70% activated Inlet

alumina and 30% Molecular Flare or solder
Sieve for adsorption of acid and connections (pure copper)
moisture

120 μm (0.001 in) wire mesh

provides solid particle retention
with minimal pressure drop
Corrosion resistant
powder-painted finish

Felt pad protecting core from

Outlet breaking up due to vibrations

Facts

Applications: Refrigerants: Connections:

• Traditional refrigeration • R22 • Available in flare, solder
• Air conditioning units • R407C
• R410A Benefit:
Maximum working pressure: • R134a • Corrosion reistant powder-painted finish
• Up to 35 bar / 500 psig • R404A
• R507
Size:
• Wide range from 8 - 60 cubic inches

42 Quick Selection Catalogue

 01
Technical data and ordering
Flare Solder (pure copper)

02
DAS
Hermetic burn-out filter drier
Rated capacity Max
Acid
Working Code no.
Type
Size
(in.)
R22/R407C/R410A R134a R404A / R507
capacity
Pressure PS 03
(kW) (g) (bar) Flare Solder

DAS 083 3⁄8 6 3.5 4.5 3.8 35 023Z1001 023Z1003

DAS 084 1⁄2 10 5.5 8 3.8 35 023Z1002 023Z1004
DAS 085 5⁄8 14.5 9 12.5 3.8 35 - 023Z1005 04
DAS 086 3⁄4 19 11.5 16.5 3.8 35 - 023Z1006
DAS 164 1⁄2 10.5 6 8.5 8.6 35 023Z1007 023Z1009
DAS 165 5⁄8 15 9.5 13 8.6 35 023Z1008 023Z1010
DAS 166 3⁄4 20 12 17 8.6 35 - 023Z1011
05
DAS 167 7⁄8 22 13.5 19 8.6 35 - 023Z1012
DAS 305 5⁄8 18 11 15 18.2 35 - 023Z1013
DAS 306 3⁄4 22 14 19 18.2 35 - 023Z1014
DAS 307 7⁄8 26 16 22 18.2 35 - 023Z1015
DAS 309 1 1⁄8 31 20 27 18.2 35 - 023Z1016 06
DAS 417 7⁄8 30 18 25 24.3 35 - 023Z1017
DAS 419 1 1⁄8 35 22 30 24.3 35 - 023Z1018
DAS 607 7⁄8 20 12 17 36.5 35 - 023Z1019
DAS 609 1 1⁄8 - - - - 35 - 023Z1020 07

08

09

10

11

12

13

Quick Selection Catalogue 43

14
DMB, Hermetic bi-flow filter drier
DMB ELIMINATOR® hermetic bi-flow filter drier series are for use DMB hermetic bi-flow filter driers contain a solid core consisting of
in liquid lines on heat pumps, and have built-in check valves to 100% 3 Å Molecular Sieve, and are especially suitable for heat pumps
ensure that refrigerant liquid flows through the filter drier from the with HFC refrigerants and polyolester oil with additives.
outer side of the filter core towards the center.
They ensure fast and effective adsorption of moisture as well as
organic and inorganic acids, and all dirt particles are retained
irrespective of flow direction.

Features
DMB

Felt pad protecting

core from breaking
up due to vibrations

Check valves to secure

ELIMINATOR® core for the flow through the
optimal drying capacity filter in both directions

Perforated plate - to keep

internal parts in position
Effective dirt removal
down to 25 µm

Powder painted surface

Flare, copper plated to prevent corrosion
steel or pure copper
solder connections

Facts

Applications: Refrigerants: Benefit:

• Traditional refrigeration • R1234yf • R438A • No dirt released by reversing the flow
• Heat pumps • R1234ze • R444B direction
• Air conditioning units • R125 • R448A • The check valves are not sensitive to dirt
• R134a • R449A and give minimum restriction, irrespective
Maximum working pressure: • R22 • R449B of flow direction
• 46bar • R407C • R450A • Use of hermetic bi-flow filter driers can
• R23 • R452A save up to ten solder connections in heat
Capacity range: • R290 • R452B pump systems. This reduces production
• 0.7 – 13.3 TR / 2.8 – 47 kW • R32 • R454B costs and the number of potential leakage
• R404A • R455A points
• R407A • R507A
• R407F • R513A
• R410A • R600
• R422B
• R422D

44 Quick Selection Catalogue

 01
Technical data and ordering
Flare Solder (pure copper) 02
DMB
Hermetic bi-flow filter drier
Size Liquid capacity (kW) Code no.
Type
in. mm R134a R404A R507 R22 R407C R410A Flare Solder 03
DMB 082 / 82s 1/4 6 3.9 2.8 2.8 4.3 4.3 4.3 023Z1412 023Z1443
DMB 083 / 83s 3/8 10 7.4 5.3 5.3 8.2 8.2 8.2 023Z1411 023Z1442
DMB 084 / 84s 1/2 12 8.3 6 6 9.2 9.2 9.2 023Z1410 023Z1441
DMB 163 / 163s 3/8 10 18 13 13 20 20 20 023Z1415 023Z1446
04
DMB 164 / 164s 1/2 12 28 20 20 32 32 32 023Z1414 023Z1445
DMB 165 / 165s 5/8 16 37 29 29 40 40 40 023Z1413 023Z1444
DMB 304 / 304s 1/2 12 28 20 20 31 31 31 - 023Z1449
DMB 305 / 305s 5/8 16 38 28 28 42 42 42 023Z1417 023Z1448
DMB 307s 7/8 - 43 32 32 47 47 47 - 023Z1447
05

06

07

08

09

10

11

12

13

Quick Selection Catalogue 45

14
DCR, Filter drier with replaceable solid core
DCR ELIMINATOR® filter driers with replaceable solid core protect Core types:
refrigeration, freezing and air conditioning systems from moisture, • 48-DC for HFC, HCFC systems and mineral or AB oils
acids and solid particles. • 48-DM for HFC, HCFC systems and POE or PAG oils
Besides being able to meet the demanding requirements of high • 48 DA for acid adsorption after burnout
working pressure levels when operating with R410A thanks to • 48-F strainer for retaining dirt
replaceable solid cores the DCR programme offers flexibility with Cores / inserts are ordered separately.
respect to different applications.

Features
DCR

The welding version allows

soldering into copper tubes

Filter to catch possible

loose particles

Core holder for fixing

the core in position.

Corrosion-resistant powder-paint
finish including zinc-phosphate
Housings for 1 – 4 cores pre-treatment

Three different core Connections for soldering

types available. (copper / steel) or
Strainer is an option welding (steel)

Top cover with or without

external access port

Standard program for max.

working pressures PS / MWP
up to 46 bar / 667 psig

Facts

Applications: Refrigerants: Connections:

• Traditional refrigeration • R22 • R1234ze • Solder
• Air conditioning units • R32 • R407f
• R134a • R290 Benefit:
Maximum working pressure: • R404A • R452A • Highly efficient dirt retaining capabilities
• 35 / 46 bar (reciever / drier application) • R410A • R444B on both the suction and the liquid line
• R407C • R449A
• R23 • R448A
• R600 • R450A depedning on
• R600a the core
• R1234yf

46 Quick Selection Catalogue

 01
Technical data and ordering
DCR 02
Filter drier with replaceable solid core
Size Code no.
Max. working pressure
Type Number of core
PS (bar)
in. mm Solder

DCR 0485 1 5⁄8 16 46 023U7250 03

DCR 0487 1 7⁄8 22 46 023U7251
DCR 0489 1 7⁄8 22 46 023U7253
DCR 04811 1 – 28 46 023U7254
DCR 04813 1 1 1⁄8 – 46 023U7255 04
DCR 04817 1 – 28 46 023U7257
DCR 04821 1 1 3⁄8 35 46 023U7276
DCR 0969 2 – 42 46 023U7459
DCR 09611 2 – 42 46 023U7461
DCR 09617 2 2 5⁄₈ – 46 023U7464
05
DCR 1449 3 7⁄8 22 35 / 46 023U7066

Solid Core Strainer

06
DCR
Inserts with gasket
Type Material / Description Code no.

48-DM solid core 100% molecular sieve 023U1392

07
48-DC solid core 80% molecular sieve & 20% Al3 O2 023U4381
48-DA solid core 30% molecular sieve & 70% Al3 O2 023U5381
48-F strainer Felt-gasket, 15 µm 023U1921
08

09

10

11

12

13

Quick Selection Catalogue 47

14
SGP, Sight glass (high pressure)
SGP are sight glasses for high pressure applications SGP N equipped with sensitive indicators that reflects a changes
(Max Working Pressure PS / MWP: 52 bar / 754 psi). colour, depending on the moisture content in the refrigerant.
SGP is available with flare, solder and socket connections, and with
and without moisture indicators.

Features
SGP

Teflon sealing gasket

Reliable due to minimal

dependancy on temperature

Max. working pressure:

52 bar / 754 psi

Working temperature range:

-50 – 80 °C / -58 – 175 °F

Indicator
• green for dry
• yellow for wet

Facts

Applications: Refrigerants: Benefits:

• Traditional refrigeration • R22 • R452A • Indicates too high moisture content in the
• Heat pump systems • R32 • R452B refrigeration system
• Air conditioning units • R134a • R454B • Indicates lack of subcooling
• Liquid coolers • R404A • R513A • Indicates refrigerant deficiency
• Transport refrigeration • R407C • R1234ze
• R507 • R744(CO2 ) Connection:
• R410A • Solder ODF x ODF
• R1270 • Solder ODF x ODM
• R407A • Flare ext. x ext.
• R407F • Flare int. x ext.
• R448A
• R449A Connection size:
• R450A • From 6 to 22 mm or 1⁄4 to 7⁄8 in.

48 Quick Selection Catalogue

 01
Technical data and ordering
SGP N 02
Sight glass (high pressure)
Type Connection type Connection (in.) Connection (mm) Code no.

SGP 6 N Flare ext. × ext. 1/4 × 1/4 6×6 014L0161

SGP 10 N Flare ext. × ext. 3/8 × 3/8 10 × 10 014L0162 03
SGP 12 N Flare ext. × ext. 1/2 × 1/2 12 × 12 014L0163
SGP 16 N Flare ext. × ext. 5/8 × 5/8 16 × 16 014L0165
SGP 19 N Flare ext. × ext. 3/4 × 3/4 19 × 19 014L0166
SGP 6 N
SGP 10 N
Flare int. × ext.
Flare int. × ext.
1/4 × 1/4
3/8 × 3/8
6×6
10 × 10
014L0171
014L0172
04
SGP 12 N Flare int. × ext. 1/2 × 1/2 12 × 12 014L0173
SGP 16 N Flare int. × ext. 5/8 × 5/8 16 × 16 014L0174
SGP 19 N Flare int. × ext. 3/4 × 3/4 19 × 19 014L0175
SGP 6s N ODF × ODF solder 1/4 × 1/4 – 014L0181 05
SGP 10s N ODF × ODF solder 3/8 × 3/8 – 014L0182
SGP 12s N ODF × ODF solder 1/2 × 1/2 – 014L0183
SGP 16s N ODF × ODF solder 5/8 × 5/8 16 × 16 014L0184
SGP 19s N ODF × ODF solder 3/4 × 3/4 19 × 19 014L0185
06
SGP 22s N ODF × ODF solder 7/8 × 7/8 22 × 22 014L0186
SGP 22s N ODF × ODF solder 1 1/8 × 1 1/8 – 014L0187
SGP 6s N ODF × ODM solder 1/4 × 1/4 – 014L0201
SGP 10s N ODF × ODM solder 3/8 × 3/8 – 014L0202
SGP 12s N ODF × ODM solder 1/2 × 1/2 – 014L0203
07
SGP 16s N ODF × ODM solder 5/8 × 5/8 16 × 16 014L0204
SGP 22s N ODF × ODM solder 7/8 × 7/8 22 × 22 014L0206

Note
08

09

10

11

12

13

Quick Selection Catalogue 49

14
GBC version 2, Shut-off ball valve
SGP are sight glasses for high pressure applications SGP N equipped with sensitive indicators that reflects a changes
(Max Working Pressure PS / MWP: 52 bar / 754 psi). colour, depending on the moisture content in the refrigerant.
SGP is available with flare, solder and socket connections, and with
and without moisture indicators.

Features
GBC version 2

Operation by wrench,
1
⁄4 turn from fully open
to fully closed valve
Valves with access
port available

One-piece seal cap for safety

purpose (EN 378) Rotation stop for fully open
Cap seal of PTFE and fully closed valve
Burst proof spindle design
High precision laser welding
Valve seat of modified teflon

Fixing holes for panel

mounting

Bi-flow valve

Facts

Applications: Refrigerants: Benefits:

• Liquid, suction and hot gas lines in all • R134a • GBC 6s – GBC 28s • Full flow with minimum pressure drop
refrigeration and air-conditioning systems • R22 can be used with • Bi-directional flow
with fluorinated refrigerants • R407C • R32 • ¼ turn from fully open to fully closed
• R404A • R454B • Burst proof spindle design
• R507 • R452B • Selected Teflon and O-ring material to
• R407A • R290 secure the best tightness and long lifetime
• R407F • Versions with access port helps in reducing
• R410A cost if service of the system is necessary
• R448A • One-piece seal cap for safety purpose
• R449A Complies with European Safety Directive
• R450A EN 378
• R452A • Ball status indicator on spindle top
• R513A indicating open or closed position
• R1234ze • Laser welded construction
• Drilled and tapped for panel mounting
• Double O-ring stem seal design
• Customized brass material ensures
consistent performance under aggressive
environment

50 Quick Selection Catalogue

 01
Technical data and ordering
Without access port With access port
02
GBC version 2
Shut-off ball valve
Size Code no.
Type Kv Value (m3/h) 03
in. mm Without Access Port With Access Port

GBC 6s 1⁄4 6 1.96 009L7020 009L7050

GBC 10s 3⁄8 10 5.68 009L7021 009L7051
GBC 12s 1⁄2 12 10.58 009L7022 009L7052
GBC 16s 5⁄8 16 14.11 009L7023 009L7053
04
GBC 18s 3⁄4 18 20.42 009L7024 009L7054
GBC 22s 7⁄8 22 28.17 009L7025 009L7055
GBC 28s 1 1⁄8 28 51.95 009L7026 009L7056
GBC 35s 1 3⁄8 35 80.89 009L7027 009L7057 05
GBC 42s 1 5⁄8 42 121.07 009L7028 009L7058
GBC 54s 2 1⁄8 54 224.96 009L7029 009L7059
GBC 67s RP 2 5⁄8 67 310 009L7036 009L7066

06

07

08

09

10

11

12

13

Quick Selection Catalogue 51

14
BML, Shut-off diaphragm valves
BML are manual shut-off diaphragm valves designed for installation In the same product category, BMT 6 is a three-way manual shut-off
in the liquid, suction and hot gas lines of refrigeration plants. valve with similar characteristics.
BML valves can be delivered with flare, ODF solder or ODF solder with BML valve can be used for HCFC, HFC and HC refrigerants.
extended ends.

Features
BML

No leakage - fitted with three

stainless steel diaphragms
Complete shut-off with
minimum torque due to valve
plate in nylon

Available with solder brass or

copper connections and flare Ready for mounting - delivered
with mounting bracket

Connections: 6 mm (1⁄4 in)

up to 22 mm (7⁄8 in)

Facts

Applications: Refrigerants: Benefits:

• Traditional refrigeration • R134a • Fitted with three stainless steel
• R22 diaphragms which ensure long
Temperature range: • R407C • operating life
• -55 – 100 °C / -67 – 212 °F • R404A • Valve plate of polyamide nylon to give
• R507 complete shut-off with minimum torque
Maximum working pressure: • R290 • Valve cover with counter-seat to prevent
• 28 bar / 406 psig • R600 the ingress of moisture in fully open
• R600a position
Working range: • R1270
• -1 – 21 bar / -14 – 304 psig • R513A
• R450A
• R1234ze
• R1234yf

52 Quick Selection Catalogue

 01
Technical data and ordering
Flare ODF solder ODF solder extended
connections
02
BML
Shut-off diaphragm valves, with hand wheel

Type Connection (in.) kv-value (m3/h)

Code no.
03
Flare ODF solder ODF extended ends

BML 6 1⁄4 0.3 009G0101 009G0102 009G0202

BML 10 3⁄8 0.84 009G0127 009G0122 009G0222
BML 12
BML 15
1⁄2
5⁄8
1.5
2.2
009G0141
009G0168
009G0142
-
009G0242
-
04
BML 22 7⁄8 2.9 - 009G0191 009G0291

05

06

07

08

09

10

11

12

13

Quick Selection Catalogue 53

14
NRV / NRVH, Check valves
NRV and NRVH check valves can be used in liquid, suction and hot The valves ensure the correct flow direction and prevent back-
gas lines in refrigeration and air conditioning plants with HCFC, HFC condensation from a warm part of the system to the cold evaporator.
and HC flammable refrigerants. Special versions, with a max. working A built-in damping piston makes the valves suitable for installation in
pressure of 90 bar / 1305 psig are available for CO2 applications. lines where pulsation can occur, e. g. in the discharge line from the
compressor.

Features
NRV / NRVH

Standard or oversize
solder connections
Min. pressure drop
NRV 0.04 – 0.07 bar / 0.58 – 1.01psig
NRVH 0.3 bar / 4.35 psig

Max. working pressure

PS / MWP 46 bar / 667 psig
Built-in damping
piston

Flare and solder version

NRV 6 – 19
NRV 6s – 35s
NRVH 6s – 35s

Facts

Applications: Refrigerants: Benefits:

• Traditional refrigeration • R134a • R449A • Hermetic tight design for solder versions
• Heat pump systems • R22 • R450A • Built-in damping piston that makes the
• Air conditioning units • R407C • R452A valves suitable for installation in lines
• Liquid coolers • R404A • R452B where pulsation can occur, e.g. in the
• Transport refrigeration • R507 • R454B discharge line from the compressor
• R407A • R513A • Available in both straightway and
• R407F • R1234ze angleway versions
• R410A • R1234yf • Solder versions are compliant with ATEX
• R32 hazard zone 2
• R290 • NRVH type check valve is with stronger
• R600, spring and it’s recommended to use for
• R600a compressors in parallel (i.e. power packs)
• R1270 where higher level of pulsation and
• R448A vibration are expected

54 Quick Selection Catalogue

 01
Technical data and ordering
Straight-way Straight-way Angle-way
Flare Solder ODF Solder ODF
02
NRV / NRVH
Check valves

Pressure drop across kv-value 2)

Connection
03
Type Version Size
valve ∆p bar 1) m3/h
in. Code no.

NRV6 Straight - way Flare 0.07 0.56 1/4 020-1040

NRV 10 Straight - way Flare 0.07 1.43 3/8 020-1041
04
NRV 12 Straight - way Flare 0.05 2.05 1/2 020-1042
NRV 16 Straight - way Flare 0.05 3.6 5/8 020-1043
NRV 6s Straight - way Solder ODF 0.07 0.56 1/4 020-1010
NRVH 6s 3) Straight - way Solder ODF 0.3 0.56 3/8 020-1069
NRV 10s Straight - way Solder ODF 0.07 1.43 3/8 020-1011
05
NRV 10sH Straight - way Solder ODF 1 0.9 3/8 020-4000
NRV 12s Straight - way Solder ODF 0.05 2.05 1/2 020-1012
NRV 16s Straight - way Solder ODF 0.05 3.6 5/8 020-1018
NRVH 16s Straight - way Solder ODF 0.3 3.6 5/8 020-1038 06
NRV 19s Straight - way Solder ODF 0.05 5.5 3/4 020-1019
NRVH 19s Straight - way Solder ODF 0.3 5.5 3/4 020-1023
NRV 19s 3) Straight - way Solder ODF 0.05 5.5 7/8 020-1054
NRVH 19s
NRV 22s
Straight - way
Angle - way
Solder ODF
Solder ODF 0.04
0.3 5.5
8.5
7/8
7/8
020-1066
020-1020
07
NRVH 22s Angle - way Solder ODF 0.3 8.5 7/8 020-1032
NRV 22s 3) Angle - way Solder ODF 0.04 8.5 1 1/8 020-1060
NRVH 22s 3)
Angle - way Solder ODF 0.3 8.5 1 1/8 020-1072
NRV 28s Angle - way Solder ODF 0.04 19 1 1/8 020-1021 08
NRV 28s 3) Angle - way Solder ODF 0.04 19 1 3/8 020-1056
NRV 35s Angle - way Solder ODF 0.04 29 1 3/8 020-1026
NRVH 35s Angle - way Solder ODF 0.3 29 1 3/8 020-1034
NRV 35s 3)
Angle - way Solder ODF 0.04 29 1 5/8 020-1061
09
1) ∆p = the minimum pressure at which the valve is completely open.
The NRVH with a stronger spring is used in the discharge line from compressors connected in parallel.
2) The Kv value is the flow of water in m3/h at a pressure drop across valve of 1 bar, ρ = 1000 kg/m3.
3) Oversize connections.
Max operating pressure is 90 bar. 10

11

12

13

Quick Selection Catalogue 55

14
ERC 211 / ERC 213 / ERC 214, Refrigeration controllers
ERC 21X is a smart multipurpose refrigeration controller with The controller has been designed to fulfill today’s requirements of
temperature and defrost management. advanced commercial Refrigeration applications.

Features
ERC 211 / 213 / 214

1. Thermostatic expansion valve type TU

2. Temperature controller ERC 21X
3. Temperature sensor NTC
M +2∞ M
4. Compressor

Facts

Thermostat: Compressor: Multi-purpose DI input:

• ON / OFF thermostat • Voltage protection • Two multipurpose DI input for defrost
• Day / Night, continuous cycle, emergency • Anti-cycle timers for optimum compressor start, Day / night control, main switch,
mode protection reference displacement and continuous
• Pre-installed applications • High-effect 16 A relays for connection of cycle control
• Compatible with wide range of compressors
sensors(NTC 5 K and 10 K, Pt1000, PTC) Display & programming:
Evaporator Fan: • Bigger and High efficient LED Display
Defrost: • Fan delay function • Display temperatures in °C / °F
• Natural, electrical and hot gas defrost • Smart evaporator fan management for • Parameter settings/readouts and alarm
• Defrost on demand energy saving conditions can be read on the display
• Start via push button, DI input or time • Fan stop at high evaporator temperature
interval Other functions:
• Stop on time, temperature or push button Alarms: • Zero cross switching in all relays
• High and low temperature alarm • Three levels password protection
• Sensor failure alarm • Door function with alarm monitoring
• High and low voltage alarm • Delay of outputs at power up
• Condenser cleaning alarm • Keypad lock and unlock feature
• Door open alarm • Galvanic Isolation
• External alarm input

56 Quick Selection Catalogue

 01
Technical data and ordering
ERC 211 / ERC 213 / ERC 214 02
Refrigeration controllers
Type Description Code no.

ERC211 KIT - ERC 211,RED LED,230V. Supplied with 1 NTC10K Temp. Probe 1.5m 080G3263
ERC213 KIT - ERC 211,RED LED,230V. Supplied with 2 NTC10K Temp. Probe 1.5m 080G3263 03
ERC214 ERC 214,Controller, RED LED, 230V. Temp Probe ordered separately 080G3295

Accessories such as temperature probes and covers available. Three phase Optyma Controller available in four sizes

04

05

06

07

08

09

10

11

12

13

Quick Selection Catalogue 57

14
EKC 315A, Refrigeration control
The controller and valve can be used where there are requirements • Cold store (air coolers)
to accurate control of superheat and temperature in connection with • Processing plant (water chillers)
refrigeration: • A/C plant

Features
EKC 315A

1. Superheat controller EKC 315A

2. Electric expansion valve AKV/P
3. Temperature sensor ACCPBT, NTC
4. Pressure transmitter AKS 32R

M M

Facts

Benefits: • Exact temperature control - the • The superheating is regulated to the

• The evaporator is charged optimally - even combination of adaptive evaporator lowest possible value at the same time as
when there are great variations of load and temperature control ensures great the media temperature is controlled by
and suction pressure temperature accuracy for the media the thermostat function
• Energy savings - the adaptive regulation of
the refrigerant injection ensures optimum
utilisation of the evaporator and hence a
high suction pressure

58 Quick Selection Catalogue

 01
Technical data and ordering
EKC 315A 02
Refrigeration control
Features Description
Supply voltage 24 V AC ± 15%, 50 / 60 Hz, 80 V A (the supply voltage is galvanically separated from the input and output signals)

Power consumption
Controller: 5 V A
AKV coil: 55 V A
03
Current signal: 4 – 20 mA or 0 – 20 mA
Input signal Pressure transmitter: 4-20 mA from AKS 33
Digital input from external contact function
Sensor input 2 pcs. Pt 1000 ohm

Output signal
Current signal: 4 – 20 mA or 0 – 20 mA 04
Load: Max. 200 ohm
Relay output 1 pcs. SPST: AC-1: 4 A (ohmic)
Alarm relay 1 pcs. SPST: AC-15: 3 A (inductive)
ICAD mounted on ICM
ICAD
Current signal: 4 – 20 mA or 0 – 20 mA
Data communication Possible to connect a data communication module 05
-10 – 55 °C, during operations
-40 – 70 °C, during transport
Environments
20 – 80% Rh, not condensed
No shock influence / vibrations
Enclosure
Weight
IP20
300 g
06
Mounting DIN rail
Display LED, 3 digits
Terminals max. 2.5 mm2 multicore
EU Low Voltage Directive and EMC demands re CE-marking complied with
Approvals LVD-tested acc. to EN 60730-1 and EN 60730-2-9 07
EMC-tested acc. to EN50081-1 and EN 50082-2

The installation of data communications must comply with the requirements described in literature sheet no. RC8AC

Ordering 08
Description Code no. PSC

Superheat controller, EKC 315A 084B7086 1

Pressure transmitter, AKS 33 (1/4” flare -1 to 12 bar) 060G2049 1
Temperature sensor, AKS 11 (3.5 m cable, -50 to 100°C) 084N0003 2 09
Electric Expansion Valve, AKV Refer Data Sheet for AKV Selection 1

10

11

12

13

Quick Selection Catalogue 59

14
LP-ETS kit and ETS, Superheat controller
Superheat control in Cold stores, processing plants or A/C plants with
Stepper Valve

Features
LP-ETS kit & ETS

1. Superheat controller EKE 1B

2. Solenoid valve EVR V2
3. Temperature sensor ACCPBT, NTC
4. Pressure transmitter AKS 32R
5. Stepper valve ETS
6. MMIGRS2 Display

M M

DescriptionC ode Number

Facts

Benefits: Functions: Energy Saving:

• The evaporator is charged optimally even • Regulation of superheat • The adaptive regulation of the refrigerant
when there are great variations of load • Temperature control injection ensures optimum utilization of
and suction pressure • MOP function the evaporator and hence a high suction
• Energy savings • ON/OFF input for start/stop of regulation pressure
• The superheating is regulated to the • Input signal that can displace the
lowest possible value at the same time as superheat reference or the temperature
the media temperature is controlled by reference
the thermostat function • Alarm if the set alarm limits are exceeded
• Relay output for solenoid valve
• PID regulation

60 Quick Selection Catalogue

 01
Technical data and ordering
Ordering Code: LP-ETS-KIT 02
Kit Includes the following codes
Description Code no. PSC

Superheat Controller, EKE 1B 080G5350 1

Pressure transmitter, AKS 32R (1/4” flare 1- 34 bar) 060G0090 1 03
ACCPBT, NTC Temperature probe, IP68 6X20, 3m Cable 080G0202 2
Din Plug 060G0008 1
120 Ohm Resistors LP-RR0550 2
Solenoid Valve, EVR V2
Stepper Valve, ETS
Refer to Data Sheet for selection of EVR. Not Included in the kit Refer to Data
Refer to Data Sheet of ETS. Not Included in the kit
1
1
04
Control Panel (MMGIRS2) 080G0294 1
ACCCBI Cable, Telephone U.I. 1.5m 080G0075 1

05

06

07

08

09

10

11

12

13

Quick Selection Catalogue 61

14
AK-CC 250A, Universal refrigeration controller
The controller is used for evaporator control refrigeration appliances offer you many options. Flexibility has been planned both for new
in supermarkets. With many predefined applications one unit will installations and for service in the refrigeration trade.

Features
AK-CC 250A

1. Case controller AK-CC 250

2. System manager AK-SM 800
3. Solenoid valve EVR V2
4. Thermostatic expansion valve type TU
5. Temperature sensor AKS 11
6. Compressor

Facts

Benefits: • Buttons and seal imbedded in the front • HACCP

• Many applications in the same unit • Can control two compressors (Hazard Analysis and Critical Control
• The controller has integrated • Fixed MODBUS data communication Points):
refrigeration-technical functions, so • Easy to remount data communication -- temperature monitoring and registration
that it can replace a whole collection of • Quick setup of period with too high temperature
thermostats and timers • Two temperature references -- factory calibration that will guarantee a
better measuring accuracy than stated
in the standard EN 441-13 without
subsequent calibration
(Pt 1000 ohm sensor)
• Digital inputs for various functions
• Clock function with backup

62 Quick Selection Catalogue

 01
Technical data and ordering
AK-CC 250A 02
Universal refrigeration controller
Features Description
Supply voltage 230 V AC 10 – 15%. 2.5 V A

03
Pt 1000 ohm (0 °C) PTC (1000 ohm / 25 °C)
Sensors for AK-CC 250A, 3 pcs off either
NTC-M2020 (5000 ohm / 25 °C)
Measuring range: -60 – 99 °C
Accuracy Controller: ± 1 K below -35 °C, ± 0.5 K between -35 – 25 °C, ± 1 K above +25 °C
Pt 1000 sensor: ± 0.3 K at 0 °C, ± 0.005 K per grad
External display EKA 163 A (only in stand alone)
Signal from contact functions 04
Requirements to contacts: Gold plating
Digital inputs
Cable length must be max. 15 m
Use auxiliary relays when the cable is longer
Electrical connection cable Max. 1.5 mm2 multi-core cable

05
CE (250 V AC) UL *** (240 V AC)
10 A Resistive
DO1. Refrigeration 8 (6) A
5 FLA, 30 LRA
10 A Resistive
DO2. Defrost 8 (6) A
Relays *) 5 FLA, 30 LRA
6 A Resistive
DO3. Fan 6 (3) A
3 FLA, 18 LRA - 131 VA Pilot duty

DO4. Alarm 4 (1) A Min. 100 mA **)

4 A Resistive 06
131 VA Pilot duty
0 – 55 °C, During operations
-40 – 70 °C, During transport
Environments
20 – 80% Rh, not condensed

Enclosure
No shock influence / vibrations
IP65 from front 07
Buttons and packing are embedded in the front
Escapement reserve for the clock 4 hours
EU Low Voltage Directive and EMC demands re CE-marking complied with
Approvals LVD tested acc. EN 60730-1 og EN 60730-2-9, A1, A2
EMC tested acc. EN50082-1 og EN 60730-2-9, A2
08
*) DO1 and DO2 are 16 A relays. DO3 and DO4 are 8 A relays. Max. load must be keept
**) Gold plating ensures make function wiht small contact loads
***) UL-approval based on 30000 couplings

Ordering 09
Description Code no. PSC

Case Controller, AK-CC 250 084B8528 1

Sensor AKS 12 1.5m PT1000 084N0036 2
Thermostatic Expansion Valve, TU Refer to data sheet for selection 1 10
Solenoid Valve, EVR Refer to data sheet for selection 1
Scroll Compressor Refer to data sheet for selection

11

12

13

Quick Selection Catalogue 63

14
AK-CC 550A, Controller for appliance control
AK-CC 550A is a complete refrigeration appliance control with great
flexibility to adapt to all types of refrigeration appliances and cold
storage rooms.

Features
AK-CC 550A

1. Temperature display EKA 163B

2. Case controller AK-CC 550A
3. System manager AK-SM 800
4. Electric expansion valve AK V
5. Temperature sensor AKS 11
6. Pressure transmitter AKS 32R
7. Scroll compressor

Facts

Benefits: • One controller for several different • Quick set-up with predefined settings
• Energy optimisation of the whole refrigeration appliances • Built-in data communication
refrigeration appliance • Integrated display at the front of the • Built-in clock function with power reserve
controller • Can be used on CO2 systems

64 Quick Selection Catalogue

 01
Technical data and ordering
AK-CC 550A 02
Controller for appliance control
Features Description
Supply voltage 230 V AC 10 – 15%. 5 V A, 50 / 60 Hz
Sensor S2 Pt 1000
Pt 1000
03
Sensor S3, S4, S5, S6
PTC 1000 ohm / 25 °C (All 4 must be of the same type)
Measuring range: -60 – 120 °C
Accuracy Controller: ± 1 K below -35 °C, ± 0.5 K between -35 – 25 °C, ± 1 K above 25 °C
Pt 1000 sensor: ± 0.3 K at 0 °C, ± 0.005 K per grad
Measuring of Pe Pressure transmitter: AKS 32R 04
Display LED, 3-digits
External display EKA 163B or 164B. (any EKA 163A or 164A)
Signal from contact functions
Requirements to contacts: Gold plating
Digital inputs DI1, D2
Cable length must be max. 15 m
Use auxiliary relays when the cable is longer
05
Digital input DI3 230 V AC
Electrical connection cable Max.1.5 mm2 multi-core cable
Max. 240 V AC, Min. 28 V AC
Max. 0.5 A
Solid state output DO1 (for AKV coil)
Leak < 1 mA 06
Max. 1 pcs. AKV
CE (250 V AC)
Relays *) DO3, DO4 4 (3) A
DO2, DO5, DO6 4 (3) A
0 – 55 °C, During operations
-40 – 70 °C, During transport
07
Environments
20 – 80% Rh, not condensed
No shock influence / vibrations
Enclosure IP20
Mounting DIN-rail or wall
Weight 0.4 Kg 08
Fixed: MODBUS
Extension options:
Data
LON RS485 / DANBUSS /
communication
TCP / IP(OEM) / MODBUS
The controller cannot be hooked up with a monitoring unit type m2
Power reserve for the clock 4 hours 09
EU Low Voltage Directive and EMC demands re CE-marking complied with
Approvals
LVD tested acc. EN 60730-1 and EN 60730-2-9, A1, A2 - EMC tested acc. EN50082-1 and EN 60730-2-9, A2

*) DO3 and DO4 are 16 A relays. DO2, DO5 and DO6 are 8 A relays. Max. load must be observed

Ordering
10
Description Code no. PSC

Case controller with MODBUS Data Communication, AK-CC 550A, CO2 version 084B8030 1
Case-Controller, Std.ver.230V
Temperature sensor, AKS 11 (3.5 m cable, -50 to 100°C)
084B8020
084N0003
1
5
11
Pressure transmitter, AKS 32R (1/4” flare -1 to 12 bar) 060G1036 1
Electric Expansion Valve, AKV/AKVP Refer Data Sheet for Selection 1

12

13

Quick Selection Catalogue 65

14
AK-PC 351, Capacity controller
AK-PC 351 is used for capacity regulation of compressors and • One suction group + one condenser group, max. 6 steps
condensers in small refrigeration applications. • One compressor group, max. 4 steps
A maximum of 4 compressors and one condenser can be regulated: • One condenser group, max. 4 steps

Features
AK-PC 351
1. AK-PC 351 Pack controller
2. System manager AK-SM 800
3. VLT® Frequency converter FC 103
4. Pressure transmitter AKS 32R
5. Scroll compressor
6. Temperature Sensor
7. Remote graphical display MMIGRS2

Facts

Benefits:
• Energy savings via:
-- optimisation of suction pressure
-- night time increase
-- floating condensing pressure

66 Quick Selection Catalogue

 01
Technical data and ordering
AK-PC 351 02
Capacity controller
Features Description
24 V AC ± 15%, 50 / 60 Hz, 17 V A
Supply voltage
24 V DC (20 – 60 V), 17 V A
Pressure measuring:
03
Ratiometric pressure transmitter type AKS 32R
1 – 5 volt pressure transmitter type AKS 32
4 analog Input 0 – 20 (4 – 20) mA pressure transmitter type AKS 33
Temperature measurement
Pt 1000 ohm / 0 °C
NTC - 86 K from digital scroll / stream 04
From contact function
E.g. to:
8 digital input Start / stop of regulation
Monitoring of safety circuits
General alarm function
5 pcs. SPST (5 A): AC-1: 5 A (ohmic)
5 pcs. SPST (5 A): AC-15: 2 (inductive)
05
Relay output to capacity control Imax. = 0.5 A
1 pc. Solid State
Imin. = 50 mA
PWM for scroll -unload
Leak<1.5 mA
2 Voltage output 0-10 V DC Ri = 1 kohm
Display output For type MMIGRS2 06
Data communication Modbus for AK-SM 850
-20 – 60 °C, During operations
-40 – 70 °C, During transport
Environments
20 – 80% Rh, not condensed

Enclosure
No shock influence / vibrations
IP40
07
Weight 0.2 kg
Mounting DIN-rail
Connection terminals max. 2.5 mm2 multi core
EU Low Voltage Directive and EMC demands re
Approvals
CE-marking complied with
LVD tested acc. EN 60730-1 and EN 60730-2-9
08
EMC-tested acc. EN61000-6-2 and 3

Ordering
Description Code no. PSC
09
Pack Controller AK-PC 351 (24 V) 080G0289 1
Pressure transmitter AKS 32R for suction (1/4” flare -1 to 12 bar) 060G1036 1
Pressure transmitter AKS 32R for discharge (1/4” flare -1 to 34 bar) 060G0090 1
Plug with 5 m cable 060G1034 2 10
Temperature sensor AKS 11 for suction (3.5 m cable, -50 to 100°C) 084N0003 1
Temperature sensor AKS 21A for discharge (5 m cable, -70 to 180°C) 084N0008 1
Speed drive FC-103 for lead compressor and condenser consult FC-103 configuration tool(drives.danfoss.com)
Scroll Compressors, third party compressors
11

12

13

Quick Selection Catalogue 67

14
AK-PC 551, Capacity controller
AK-PC 551 is used for capacity regulation of compressors and • One suction group + one condenser group
condensers in small refrigeration applications. • Two suction groups + one shared condenser, max. 4 + 4 steps
A maximum of 8 compressors and one condenser can be regulated: • One compressor group, max. 8 steps
• One condenser group, max. 8 steps

Features 1. Pack controller AK-PC 551

AK-PC 551 2. Remote graphical display
MMIGRS2
3. System Manager AK-SM 800
4. VLT® Frequency converter FC 103
5. Pressure transmitter AKS 32R
6. Temperature sensor AKS 11
7. Scroll compressor

One Suction

Two Suction

Facts

Benefits: -- night time increase

• Energy savings via: -- floating condensing pressure
-- optimisation of suction pressure -- load limitation

68 Quick Selection Catalogue

 01
Technical data and ordering
AK-PC 551 02
Capacity controller
Features Description
24 V AC ± 15%, 50 / 60 Hz, 17 V A
Supply voltage 24 V DC (20 – 60 V), 17 V A
230 V AC (85 – 265 V) 50 / 60 Hz, 20 V A
03
Pressure measuring:
Ratiometric pressure transmitter type AKS 32R
1 – 5 volt pressure transmitter type AKS 32
8 analog Input 0 – 20 (4 – 20) mA pressure transmitter type AKS 33
Temperature measurement
Pt 1000 ohm / 0 °C
NTC - 86 K from digital scroll / stream
04
From contact function
E.g. to:
8 digital input Start / stop of regulation
Monitoring of safety circuits
General alarm function
4 pcs. SPDT (8 A): AC-1: 6 A (ohmic) 05
4 pcs. SPDT (8 A): AC-15: 4 A (inductive)
2 pcs. SPST (16 A): AC-1: 10 A (ohmic)
Relay output to capacity control 2 pcs. SPST (16 A): AC-15: 3.5 A (inductive)
Imax. = 0.5 A
2 pcs. Solid State.
PWM for scroll -unload
Imin. = 50 mA 06
Leak<1.5 mA
2 Voltage output 0-10 V DC Ri = 1kohm, Separate 24 V supply required
Display output For type MMIGRS2
Data communication Modbus for AK-SM 850
-20 – 60 °C, During operations

Environments
-40 – 70 °C, During transport 07
20 – 80% Rh, not condensed
No shock influence / vibrations
Enclosure IP20
Weight 0.4 kg
Mounting
Connection terminals
DIN-rail
max. 2.5 mm2 multi core
08
EU Low Voltage Directive and EMC demands re
CE-marking complied with
Approvals
LVD tested acc. EN 60730-1 and EN 60730-2-9
EMC-tested acc. EN61000-6-2 and 3

09
Ordering
Description Code no. PSC

Pack Controller AK-PC 551 with built-in display 080G0281 (230 V) or 080G0283 (24 V) 1
Remote Display MMIGRS2 080G0294 1
10
Wire for Display 080G0076 (3 m) 1
Pressure transmitter AKS 32R for suction (1/4” flare -1 to 12 bar) 060G1036 1
Pressure transmitter AKS 32R for discharge (1/4” flare -1 to 34 bar) 060G0090 1
Plug with 5 m cable 060G1034 2 11
Temperature sensor AKS 11 for suction (3.5 m cable, -50 to 100°C) 084N0003 1
Temperature sensor AKS 21A for discharge (5 m cable, -70 to 180°C) 084N0008 1
Variable Speed drive FC-103 for lead compressor and condenser Consult FC-103 configuration tool (drives.danfoss.com)
Scroll Compressor
12

13

Quick Selection Catalogue 69

14
AK-PC 651, Capacity controller
AK-PC 651 is used for capacity regulation of compressors and • One suction group + one condenser group
condensers in small refrigeration applications. • One compressor group, max. 10 steps
A maximum of 10 compressors and one condenser can be regulated: • One condenser group, max. 8 steps

Features
AK-PC 651

1. Pack controller AK-PC 651

2. Remote graphical display
MMIGRS2
3. System Manager AK-SM 800
4. VLT® Frequency converter FC 103
5. Pressure transmitter AKS 32R
6. Temperature sensor AKS 11
7. Scroll compressor

Facts

Benefits:
• Energy savings via:
-- optimisation of suction pressure
-- night time increase
-- floating condensing pressure
-- load limitation

70 Quick Selection Catalogue

 01
Technical data and ordering
AK-PC 651 02
Capacity controller
Features Description
Supply voltage 230 V AC (85 – 265 V) 50 / 60 Hz, 26 V A
Pressure measuring:
Ratiometric pressure transmitter type AKS 32R 03
1 – 5 volt pressure transmitter type AKS 32
10 analog Input 0 – 20 (4 – 20) mA pressure transmitter type AKS 33
Temperature measurement
Pt 1000 ohm / 0 °C
NTC - 86 K from digital scroll / stream

18 digital input
From contact function
E.g. to:
04
(14 for low voltage + 4 for high voltage or Start / stop of regulation
low voltage) Monitoring of safety circuits
General alarm function
7 pcs. SPST (8 A): AC-1: 6 A (ohmic), AC-15: 4 A (inductive)
4 pcs. SPDT (8 A): AC-1: 6 A (ohmic), AC-15: 4 A (inductive)
2 pcs. SPDT (16 A): AC-1: 7 A (ohmic), AC-15: 3.5 A (inductive)
05
Relay output to capacity control
Imax. = 0.5 A
2 pcs. Solid State.
Imin. = 50 mA
PWM for scroll -unload
Leak<1.5 mA
4 Voltage output 0-10 V DC Ri = 1 kohm, Separate 24 V supply required
Display output For type MMIGRS2 06
Data communication Modbus for AK-SM 850
-20 – 60 °C, During operations
-40 – 70 °C, During transport
Environments
20 – 80% Rh, not condensed

Enclosure
No shock influence/vibrations
IP20 07
Weight 0.8 kg
Mounting DIN-rail
Connection terminals max. 2.5 mm2 multi core
EU Low Voltage Directive and EMC demands re
Approvals
CE-marking complied with
LVD tested acc. EN 60730-1 and EN 60730-2-9
08
EMC-tested acc. EN61000-6-2 and 3

Ordering
Description Code no. PSC
09
Pack Controller AK-PC 651 with built-in display 080G0312 1
Remote Display MMIGRS2 080G0294 1
Wire for Display 080G0076 (3 m) 1
Pressure transmitter AKS 32R for suction (1/4” flare -1 to 12 bar) 060G1036 2 10
Pressure transmitter AKS 32R for discharge (1/4” flare -1 to 34 bar) 060G0090 1
Plug with 5 m cable 060G1034 3
Temperature sensor AKS 11 for suction (3.5 m cable, -50 to 100°C) 084N0003 1
Temperature sensor AKS 21A for discharge (5 m cable, -70 to 180°C)
Variable Speed drive FC-103 for lead compressor and condenser
084N0008
Consult FC-103 configuration tool (drives.danfoss.com)
1
11
Scroll Compressor

12

13

Quick Selection Catalogue 71

14
AK-SM 800 series, System manager
The System Manager controller from Danfoss is the global control Designed specifically for the food retail and food
and supervisory solution for the food retail industry. processing / handling market, the System Manager provides
The System Manager uses the latest technology to provide the comprehensive functionality and support tools to cover small to
maximum benefit to the end user, both in terms of energy saving large stores.
optimization, control options and full web useraccess.

3 main versions
AK-SM 820 (C-Store), Configuration
web based wizards to
Features AK-SM 850 (Refrigeration)
and AK-SM 880 (Full store) assist in initial setup
AK-SM 800

Available support tool

Remote Management Tool
(RMT) that facilitates full
Full offline programming, remote
web browser software updating and
navigation graphical screen creation

Custom graphic screen SVGA 800x600

(seen in web and local screen) local color screen

Support of Service Tool

via tunnelling over IP (AK2 only)

Site Service App Seamless view

for Remote access from of multiple System Manager
tablet or smart phone units that are interconnected
for service technitians (host network)

All new hardware casing

Automatically created plant providing easy access to power and field
view screens showing main bus connections, designed for wall or
refrigeration systems in one screen panel door mounting

Facts

Benefits: Design features: Hardware capability features:

• Direct support to EM-800 • Active TFT SVGA color screen 800x600 • Built in web server
(AKM not supported / needed) • Front alarm status LED • No back up battery required
• Supports centralized and decentralized • Removable keyboard panel • RS485 LonWorks®
control strategy; compatible with Danfoss (revealing connections) • Ethernet
case and pack controllers and Danfoss I/O • Easy access to USB flash drive • EKC Modbus
• Open XML data transfer allowing remote • Wall and panel mounting options • USB
access to key system parameters • Built in alarm relay output

72 Quick Selection Catalogue

 01
Technical data and ordering
AK-SM 800 series 02
System manager
SM800 version comparison AK-SM 810, SM820 - C-Store Version SM850 - Refrig version SM880 - Full version

Refrigeration Control
All SM800 variants come with Centralized
I/O and Pack / Case control options. 03
EKC
Max 32 generic device support Max 120 generic support Max 120 generic support
AK2
SLV
FC102
Lighting Control
All SM800 variants come with built in 04
lighting control via I/O modules. 10 30 30
The number of zones differ
HVAC
Only the SM820 and SM880 support built in
10 n/a 45
HVAC control via I/O
Alarms 05
Capacity 250 250 250
Miscellaneous points (via IO modules)
Relay (R), Sensor (S), ON / OFF (O / F),
R=20, S=20, O / F=20, V=20 R=70, S=80, O / F=70, V=70 R=70, S=80, O / F=70, V=70
Variable (V)
Master control 06
Po Optimization, Master Schedules, AKC ON
Note: Adaptive Defrost not currently X X X
supported
Misc Calculations
Boolean Logic statements 96 96 96
History 07
The SM800 has the ability to record
600 points 600 points 600 points
datapoints for history and view
Leak Detectors
Refrigerant gas detectors
10 50 50
(connected via AK I/O)
Energy Meters 08
Pulse Input (via I/O module), Carlo Garvazi,
Wattnode, Wattnode Plus Modbus, 32 80 80
Veris Modbus
Service Tool Support
Tunneling via front end (IP connection only) X X X
09
Ordering
Type Description Options Code no.
AK-SM 810
AK-SM 820
C-Store Refrigeration/HVAC/Lightning,No display, No buttons
C-Store (Refrigertion / HVAC / Lighting)
Convienience Store with 32 device capacity
Convienience Store version with 32 device capacity
080Z4006
080Z4004
10
AK-SM 850 Refrigeration (including lighting) Refrigeration version with 120 device capacity 080Z4001
AK-SM 880 Full (Refrigertion / HVAC / Lighting) Full store version with 120 device capacity 080Z4008
AK-SM 800AL Alarm logger AK-SM 8xx accessory 080Z4014

11

12

13

Quick Selection Catalogue 73

14
Optyma™ Control, Single / Three-phase
The Optyma™ Control is particularly suitable for the Optyma™ and It offers both control and protection in a single unit, thanks to the
Optyma™ Plus condensing units from Danfoss but is also compatible unique built-in differential magnetothermic circuit breaker, which
with other condensing units on the market. guarantees safety by cutting the general power supply.
The control features an attractive new design and simple flexible
programming.

Features
Optyma™

1. Optyma control - AK-RC 101/103

2. System manager AK-SM 800
3. Solenoid valve EVR V2
4. Thermostatic expansion valve TU
5. Temperature sensor AKS 11
6. Condensing unit - Optyma plus

Facts

Benefits: Display & programming: Protection:

• Direct control of defrosting elements, • LED indicators and large display show • Automatic fuse protect the refrigeration
evaporator fans, room light with outputs system status unit
directly connectable to the various units • User-friendly keypad • Stylish ABS housing with transparent cover
• Standard and ADAP-KOOL® compatible • Display resolution to 0.1 °C for access to the automatic fuse, all with an
Modbus data communication IP65 protection rating so that panel can be
used outside the room

74 Quick Selection Catalogue

 01
Technical data and ordering
Optyma™ Control, Single phase 02
Electronic controller
Features Description

Voltage 230 V AC ± 10%, 50 / 60 Hz

Power supply
Max absorbed power (electronic control) ~7VA 03
Operating temperature -5 – 50 °C
Ambient conditions Storage temperature -30 – 70 °C
Relative humidity < 90% RH
Connectable sensor types NTC 10 K 1%
Resolution 0.1 °K
04
General characteristics
Probe read precision ± 0.5 °K
Read range -45 – 45 °C
Compressor 1500 W (AC3)

Output characteristics
Defrost 3000 W (AC1) 05
max. applicable load Fans 500 W (AC 3)
(230 V AC)
Room light 800 W (AC1)
Configurable alarm contact / aux (voltage-free contact) 100 W
General electric protection Bipolar differential magnetothermic circuit breaker
Cover protection
16 A Id = 300 mA switching power 4.5 kA, Id = 30 mA (on request)
Rating IP65
06
Insulation and mechanical Cover material Self-extinguishing ABS
characteristics Type of insulation Class II
Box dimensions 262 x 168 x 97
07

08

09

10

11

12

13

Quick Selection Catalogue 75

14
Technical data and ordering
Optyma™ Control, three phase
Electronic controller
Features Optyma™ Control AK-RC 103, three-phase (3 kW) Optyma™ Control AK-RC 103, three-phase (5 kW)

Case dimensions 400 × 300 × 135 mm 400 × 300 × 135 mm

Protection rating IP65 IP65
Power supply (3F + N + T) 400 V AC ± 10% 50 / 60 Hz 400 V AC ± 10% 50 / 60 Hz
Load type three-phase three-phase
Operating temperature -5 – 40 °C -5 – 40 °C
Storage temperature -25 – 55 °C -25 – 55 °C
Relative ambient humidity < 90% RH < 90% RH
Main switch / general 4 poles magnetothermic 16 A 4 poles magnetothermic 25 A
Compressor protection motor circuit breaker motor circuit breaker
Defrosting electrical electrical
Status indicators LED + display LED + display
Alarm signals LED + buzzer LED + buzzer
Ambient probe NTC 10 K 1% NTC 10 K 1%
Evaporator probe NTC 10 K 1% NTC 10 K 1%
Door switch present present
High/low pressure switch present present
Kriwan® connection present present
Compressor functioning mode pump-down / thermostat pump-down / thermostat
Compressor 370 W – 3000 W 3000 W – 5500 W
Condenser fans output 1 800 W (1 ph) 800 W (1 ph)
Condenser fans output 2 total (1 ph)
Evaporator fans 500 W (1 ph) 2000 W (1 ph/3 ph)
Defrosting heaters 6000 W 9000 W
Room light 800 W (AC1) resistive load 800 W (AC1) resistive load
Solenoid valve present present
Compressor oil heater present present
Alarm relay 100 W 100 W

Ordering
Type Description Psc Code no.

AK-RC 101 Optyma™ Control, single-phase 1 080Z3200

AK-RC 103 Optyma™ Control, three-phase (3 kW) 4.5-6.3 A 1 080Z3201
AK-RC 103 Optyma™ Control, three-phase (3 kW) 7-10 A 1 080Z3202
AK-RC 103 Optyma™ Control, three-phase (5 kW) 11-16 A 1 080Z3206
AK-RC 103 Optyma™ Control, three-phase (5 kW) 14-20 A 1 080Z3207

76 Quick Selection Catalogue

 Quick Selection Notes:
01

02

03

04

05

06

07

08

09

10

11

12

13

Quick Selection Catalogue 77

14
MBS 3000, Compact pressure transmitter
The compact pressure transmitter MBS 3000 is designed for use ranges from 0 – 1 to 0 – 600 bar and a wide range of pressureand
in almost all industrial applications, and offers a reliable pressure electrical connections.
measurement, even under harsh environmental conditions. Excellent vibration stability, robust construction, and a high
The flexible pressure transmitter programme covers a 4 – 20 mA degree of EMC/EMI protection equip the pressure transmitter to
output signal, absolute and gauge (relative) versions, measuring meet the most stringent industrial requirements.

Features
MBS 3000

Facts

Benefits:
• 4 – 20 mA output signal
• Operating temperature: -40 – 85 °C
• Measuring range: 0 – 600 bar
• Standard pressure connection G ¼ A
• For use in severe industrial environments
such as pumps, compressors, pneumatics
and water treatment
• Wetted parts: stainless steel (AISI 316)

78 Quick Selection Catalogue

 01
Technical data and ordering
MBS 3000 02
Compact pressure transmitter
Pressure connection Output signal
Measuring range
Code no.
Pe (bar) 1)
G ¼ EN 837 M20 x 1.5 4 – 20mA 0 – 10V

0–1 • • 060G1113 03
0 – 2.5 • • 060G1122
0–4 • • 060G1123
0–6 • • 060G1124
0 – 10 • • 060G1125
04
0 – 10 • • 060G1650
0 – 16 • • 060G1133
0 – 25 • • 060G1430
0 – 40 • • 060G1105
0 – 100 • • 060G1107
05
0 – 160 • • 060G1112
0 – 250 • • 060G1111
0 – 400 • • 060G1109

1) Gauge / relative
06

MBS 3000
Spare parts & accessories
Type Description Code no.
07
EN 175301-803-A, Pg 9 plug 060G0008
Plug
EN 175301-803-A, plug with 5 m cable 060G1034

08

Dimensions & weight

09

10

11

12
Weight: 0.17 kg All dimensions in millimetres

13

Quick Selection Catalogue 79

14
MBS 3100, Compact pressure transmitter
The compact ship approved pressure transmitter MBS 3100 is transmitter MBS 3100 is designed for use in almost all marine
designed for use in almost all marine applications, and offers a applications, and offers a reliable pressure measurement, even under
reliable pressure measurement, even under harsh environmental harsh environmental conditions.
conditions. The flexible pressure transmitter programme covers a 4 – 20 mA
The flexible pressure transmitter programme covers a 4 – 20 mA output signal, absolute and gauge (relative) versions, measuring
output signal, absolute and gauge (relative) versions, measuring ranges from 0 – 1 to 0 – 600 bar, plug and cable connections
ranges from 0 – 1 to 0 – 600 bar, plug and cable connections and a wide range of pressure connections.
and a wide range of pressure connections. Excellent vibration stability, robust construction, and a high
Excellent vibration stability, robust construction, and a high degree of degree of EMC/EMI protection equip the pressure transmitter to
EMC/EMI protection equip the pressure transmitter to meet the most meet the most stringent marine requirements.
stringent marine requirements. The compact ship approved pressure

Features
MBS 3100

Facts

Benefits:
• 4 – 20 mA output signal
• Operating temperature: -40 – 85 °C
• Measuring range: 0 – 600 bar
• Standard pressure connection G ¼ A EN
837, G ¼ A, O-ring DIN 3852 G ½ A EN 837
• Available with all relevant marine
approvals
• Suited for marine applications
• Wetted parts: stainless steel (AISI 316)

80 Quick Selection Catalogue

 01
Technical data and ordering
MBS 3100 02
Compact pressure transmitter
Pressure connection
Measuring range
Code no.
Pe (bar) 1)
G ¼ EN 837 G ¼ A, O-ring DIN 3852 G ½ A EN 837

0–4 • 060G1367 03
0–6 • 060G1368
0 – 10 • 060G1369
0 – 40 • 060G1372
0–4 • 060G1463
04
0–6 • 060G1464
0 – 10 • 060G1465
0 – 40 • 060G1468
0 – 10 • 060G1471
0 – 16 • 060G1472
05
1) Gauge / relative
2) Sealed gauge

06

MBS 3100
Spare parts & accessories
Type Description Code no.
07
EN 175301-803-A, Pg 9 plug 060G0008
Plug
EN 175301-803-A, plug with 5 m cable 060G1034
Adapters G ½ female – ¼ flare male 060G1024
08

Dimensions & weight

09

10

11

12
Weight: 0.2 kg All dimensions in millimetres

13

Quick Selection Catalogue 81

14
MBS 5100, Pressure transmitter
The ship approved high accuracy pressure transmitter MBS 5100 measuring ranges from 0 – 1 to 0 – 600 bar, zero point and span
is designed for use in almost all marine applications, and offers a adjustment, plug connection and female/flange pressure
reliable pressure measurement, even under harsh environmental connections.
conditions. Excellent vibration stability, robust construction, and a high
The pressure transmitter programme in block design covers a degree of EMC/EMI protection equip the pressure transmitter to
4 – 20 mA output signal, absolute and gauge (relative) versions, meet the most stringent industrial requirements.

Features
MBS 5100

Facts

Benefits:
• 4 – 20 mA output signal
• Operating temperature: -40 – 85 °C
• Measuring range: 0 – 600 bar
• Pressure connection G ¼ female
• Available with all relevant marine
approvals
• Designed to meet the strict demands in
marine equipment
• Wetted parts: stainless steel (AISI 316)

82 Quick Selection Catalogue

 01
Technical data and ordering
MBS 5100 02
Pressure transmitter
Pressure connection
Measuring range
Code no.
Pe (bar) 1)
G ¼ with flange

0 – 2.5 • 060N1033 03
0–4 • 060N1034
0–6 • 060N1035
0 – 10 • 060N1036
0 – 16 • 060N1037
04
0 – 25 • 060N1038
0 – 40 • 060N1039

1) Gauge / relative

05

06

MBS 5100
Spare parts & accessories
Type Description Code no.
07
EN 175301-803-A, Pg 9 plug 060G0008
Plug
EN 175301-803-A, plug with 5 m cable 060G1034

08

Dimensions & weight

09

10

11

12
Weight: 0.4 kg All dimensions in millimetres

13

Quick Selection Catalogue 83

14
AKS, Pressure transmitters
AKS pressure transmitters are used for commercial air-conditioning AKS pressure transmitters utilize temperature calibrations methods
and for commercial and industrial refrigeration applications. and sensing technologies optimized for the refrigeration and
They are made in stainless steel to be compatible with fluorinated air-conditioning segments.
and natural refrigerants and laser welding with no soft seals ensure
hermetic tightness for decades.

Features
AKS
Compact AKS 32R; AKS 3000 with solder
or female flare pressure ports

Dedicated temperature
calibration to increase
accuracy when used for
suction or discharge pressure
regulation

Parts in touch with

refrigerants are all
laserwelded, free
of soft gaskets

Facts

Benefits: • •
• Designed for precise and energy • Pressure ranges up to 159 bar • Available with a variety of pressure
optimized control • High test pressure, ≥ 33 bar connection, incl. 1⁄4 inch female flare
• Robust design optimized for • Available with 4 – 20 mA, 1 – 5 V DC or with valve depressor and 3⁄8 inch solder
-- air-conditioning 10 – 90% Vs ratiometric signals connection, ensuring a 100% hermetic
-- refrigeration plant installation
-- supermarket installation
-- natural refrigerants like CO2 and R717

84 Quick Selection Catalogue

 01
Technical data and ordering
AKS 32R and AKS 2050 - With 10 – 90% ratiometric output signal 02
Pressure transmitters

Pressure range Max. overload pressure

Type Electrical connection Pressure connection Code no.
(bar) (bar)

-1 – 12 33 EN 175301-803-A without plug 7

⁄16 – 20 UNF flare 1⁄4 in 060G1036 03
AKS 32R
-1 – 34 55 EN 175301-803-A without plug 7
⁄16 – 20 UNF flare 1⁄4 in 060G0090
-1 – 59 100 EN 175301-803-A without plug Thread ISO 228/1 – G 3⁄8 A (BSP) 060G5750 ¹⁾
-1 – 99 150 EN 175301-803-A without plug Thread ISO 228/1 – G 3⁄8 A (BSP) 060G5751 ¹⁾
AKS 2050 -1 – 159 250 EN 175301-803-A without plug Thread ISO 228/1 – G ⁄8 A (BSP)
3
060G5752 ¹⁾
04
-1 – 59 100 EN 175301-803-A without plug 1/4 –18 NPT 060G6342
-1 – 159 250 EN 175301-803-A without plug 1/4 –18 NPT 060G6344

1) With pulse-snubber

AKS 32 and AKS 2050 05

Accessory
Type Electrical connection Comments Code no.
Cable with plug Plug 3 + E (female) 5 m cable 060G1034
Plug EN 175301-803-A Pg 9 060G0008 06
AKS 32 with 1 – 5 V output signal
Pressure transmitters
9 – 30 V DC supply voltage, accuracy 0.3% FS (typical), pressure reference gauge (relative)
07
Pressure range Max. overload pressure
Type Electrical connection Pressure connection Code no.
(bar) (bar)

-1 – 12 33 EN175301-803-A Pg9 plug 7

⁄16 – 20 UNF flare 1⁄4 in 060G2069
AKS 32
-1 – 34 40 EN175301-803-A Pg9 plug 7
⁄16 – 20 UNF flare ⁄4 in1
060G2071 08
AKS 33 with 4 – 20 mA output signal
Pressure transmitters
10 – 30 V DC supply voltage, accuracy 0.3% FS (typical), pressure reference gauge (relative)
09
Pressure range Max. overload pressure
Type Electrical connection Pressure connection Code no.
(bar) (bar)

-1 – 12 33 EN175301-803-A Pg9 plug ⁄16 – 20 UNF flare 1⁄4 in

7
060G2049
-1 – 12 33 EN175301-803-A Pg 9 plug G ⁄8 EN 837
3
060G2105
10
AKS 33 -1 – 12 33 EN175301-803-A Pg9 plug 1/4 –18 NPT 060G2101
-1 – 20 40 EN175301-803-A Pg9 plug 1/4 –18 NPT 060G2102
0 – 25 40 EN175301-803-A Pg9 plug 1/4 –18 NPT 060G2115

AKS 33 with 4 – 20 mA output signal 11

Pressure transmitters
10 – 30 V DC supply voltage, accuracy 1% FS (typical), pressure reference gauge (relative)

Type
Pressure range
(bar)
Max. overload pressure
(bar)
Electrical connection Pressure connection Code no. 12
-1 – 12 33 EN175301-803-A Pg9 plug 7
⁄16 – 20 UNF flare 1⁄4 in 060G1323
0 – 30 55 EN175301-803-A Pg9 plug 7
⁄16 – 20 UNF flare ⁄4 in1
060G1327
AKS 3000
0 – 40 100 EN175301-803-A Pg9 plug 7
⁄16 – 20 UNF flare 1⁄4 in 060G1328
0 – 60 200 EN175301-803-A Pg9 plug 1⁄4 – 20 NPT flare 1⁄4 in 060G1083 13

Quick Selection Catalogue 85

14
EKS / AKS, Temperature sensors
AKS temperature sensors are used for exacting applications within EKS temperature sensors are a family of cost efficient temperature
air-conditioning as well as commercial and industrial refrigeration sensors based on thermistors with NTC or PTC characteristics which
applications. are used with Danfoss EKC controllers.
The Pt 1000 sensor element meets the DIN/EN 60751 class B
requirements and ensures an accurate and reliable temperature
signal applicable for regulation, safety and data logging.

Features
EKS / AKS

EN441 certified
AK-HS 1000
HACCP sensors

AKS21 sensor system for

controlling extreme high and
low temperatures

AKS 11 temperature sensor for

reliable super heat control to
optimize accuracy and process
efficiency

Facts

Benefits: • •
• AKS 11 is designed for easy installation • AKS 21 is the ultimate sensor for • EKS comes with PTC 1000 Ω (EKS 111),
and optimized for demanding control -70 – 180 °C anywhere in the refrigeration NTC 5000 Ω (EKS 211), or
functions like liquid injection control in plant and is available in various designs NTC 1000 Ω (EKS 221) with various cable
evaporators where a reliable sensor is a (cable and B-head) and with various lengths
must accessories like sensor pockets
• AKS 12 is the all-round cable temperature • AK-HS 1000 is the first choice for a
sensor to be used for plain temperature temperature sensor for monitoring and
monitoring and control purposes HACCP data logging. The sensor design
makes it simulate a refrigerated product
what enable a realistic temperature signal
is transmitted to a HACCP data logger

86 Quick Selection Catalogue

 01
Technical data and ordering
AK-HS - For monitoring and data logging in HACCP systems 02
Temperature sensors
Temperature range Measuring Cable length
Type Signal Enclosure Code no.
(°C) accuracy (m)

AK-HS 1000 Pt 1000 -30 – 50 EN 60751 Class B IP 54 5.5 084N1007

03

EKS - For measuring air temperatures

Temperature sensors
PTC characteristics matches controllers types EKC 101, EKC 201, EKC 301, CC and AK. 04
NTC characteristics matches controllers, types EKC and CC.

Temperature range Electrical Cable length

Type Signal Sensor tube Code no.
(°C) connection (m)

PTC 1000 -55 – 100 Round Cable with pins 1.5 084N1178 05
EKS 111 PTC 1000 -55 – 100 Round Cable with pins 3.5 084N1179
PTC 1000 -55 – 150 Round Cable with pins 8.5 084N1168
EKS 211 NTC 5000 -40 – 80 Round Cable 3.5 084N1221

06
EKS - For measuring temperatures
Temperature sensors
The sensor characteristics matches to OPTYMA room controllers and MCX unit controllers.

Temperature range Electrical Cable length

07
Type Signal Sensor tube Code no.
(°C) connection (m)

EKS 221 NTC 10000 -50 – 120 Round Cable 3.5 084N3210

08
AKS - For measuring temperature
Temperature sensors
Recommended for accurate temperature measurement in
superheating, food safety logs and other important applications
09
Measure range Electrical Cable length
Type Signal Sensor tube Code no.
[°C] connection [m]

AKS 12 Pt 1000 -40 – 80 Round AMP plug 3.5 084N0039

Pt 1000 -50 – 100 Concave Cable 1.5 084N0036
AKS 11
Pt 1000 -50 – 100 Concave Cable 8.5 084N0008 10
AKS 21A Pt 1000 -70 – 180 Round Cable 3.5 084N2007
AKS 21W Pt 1000 -70 – 180 Sensor pipe Cable 2.5 084N2017

11

12

13

Quick Selection Catalogue 87

14
DGS, Gas sensor
DGS helps to comply to environmental F-Gas Regulations and / or • Supermarkets
Health and Safety requirements, on new or existing systems in: • Process refrigeration plants
• Refrigerated storage and warehousing
• Special applications areas / zones

Features
DGS

RS485 Modbus
for data communication and
integration into a complete
ADAP-KOOL® system

Utilizing
either Semi Conductor
(SC) or Infrared (IR)
technologies
Gives
quick and immediate
response in detecting a
wide range of different
gases typically applied
Can be used in Refrigeration and Air
in stand-alone or integrated Conditioning systems
systems, where continuous
real-time, automatic
monitoring with Danfoss
ADAP-KOOL® Refrigeration
Control and Monitoring System
and / or Building Management
Systems is applied

Facts

Typical Refrigerant gas applications • Sensing technology varies to make the

include: best detection for a given gas, in terms
• Halocarbons: HFC’s, HCFC’s, CFCs. of performance and cost. DGS IR is based
• Carbon Dioxide (CO₂/R744) on Infra-Red sensor technology, DGS SC is
• Hydrocarbons (e.g. R290) based on Semi-Conductor and DGS-PE is
• Other special application gases to based on Pellistor
customer request

88 Quick Selection Catalogue

 01
Technical data and ordering
DGS 02
Gas sensors
Features Description

24 V DC ± 20 % ; reverse polarity protected

Supply voltage
24 V AC - 10 % / + 15 %
03
Power Consumption (24V DC) Max. 250 mA (5 VA)

Digital input Potential-free contact

- Alarm acknowledge and test alarm 40 V AC/DC, 0.5 A, change-over contact (SPDT)
- Alarm relay /fault relay Critical relay: Normally Closed (SIL II compliant), Warning relay: Normally Open

Proportional, overload and short-circuit proof, load ≤ 500 Ohm

04
Analoge output signal
Measuring range: 0-10 V / 2-10V /0-20mA / 4-20mA

Modbus Physical 5 V DC, 250 mA max. overload, short-circuit and reverse-polarity protected
Enclosure rate IP 65
Humidity range 15 - 90 % RH not-condensing 05
Burning behaviour UL 94 V2
Housing colour Black
Dimensions (W x H x D in mm) 94 x 130 x 57
Installation
Cable entry
Wall mounting
2 x M12 / 3 x M20
06
Wire connection: Screw-type terminals 0.25 to 2.5 mm2
Power supply, Modbus Analog output, Screw-type terminals 0.25 to 1.3 mm2
Digital input Sensor head 3-pin plug connector

Sensor information DGS-IR (CO2) DGS-SC (HFC) DGS-PE (Propane)

07
Temperature range -35 to +40°C -30 to +50°C -30 to +50°C
Response time T90 <120s <40s <10s
Recovery time, T0 90s 180s 120s
Maximum calibration interval 60 months 12 months 6 months
Measuring range 0 – 20,000ppm 20 – 2,000ppm 0 – 5,000ppm 08
Default alarm threshold 5,000ppm 500ppm 800ppm

Compliance IEC61010-1 ANSI/UL CAN/CSA-C22.2 No61010-1 RoHS

Light (LED) 20 – 80% Rh, not condensed 09

Buzzer >85 dB (A) (0.1 distance ) 2300 Hz

Ordering
Type Description Code no.
10
DGS-SC HFC gr.1* + B&L 080Z2809
DGS-SC HFC gr.2* + B&L 080Z2810
DGS-SC HFC gr.3* + B&L 080Z2811
DGS Sensors
DGS-PE Propane + B&L 080Z2812 11
DGS-IR CO2 + B&L 080Z2807
DGS-IR-CO2 5 m + B&L 080Z2808

*HFC gr.1:: R1234ze, R454c, R1234yf , R454a, R452A, R454b, R513a

HFC gr.2: R407F, R416a, R417a, R407A, R422a, R427a, R449A, R437a, R134A , R438a, R422D 12
HFC gr.3: R448A, R125, R404A, R32, R507A, R434a, R410A, R452b, R407C , R143b

Bold = calibration gas

13

Quick Selection Catalogue 89

14
Secop reciprocating compressors produced forDanfoss -
Direct current
BD range is the leading and widest AC / DC compressor range The excellent performance of the BD series safeguards food, medical
tailored for cooling on the move. and telecommunication.

Features
Reciprocating
compressors

Models available for

Efficient and reliable
solar supply

Lasting performance Compact design

Low weight Energy optimisation

Built in speed control,

Silent operation thermostat signal,
thermal protection

Facts

Applications: Refrigerants: Benefit:

• 12 / 24 V DC mobile refrigerators and • R134a • Operation under extreme conditions
freezers • Minimal energy consumption
• 12 V DC LBP / MBP van cooling boxes Capacity range: • Portable beyond traditional limits
• 12 / 24 V DC HBP telecommunication • 32 - 274 W • Application possible at extreme voltage
systems rate
Segment usage:
• Refrigeration MT

90 Quick Selection Catalogue

 01
Technical data and ordering
R134a
02
Kit ordering code Electrical equipment

Compressors Cooling capacity

Application with with AC / DC DC Electronic
model (W) 1) AC / DC electronic
DC electronic electronic module module (spare)
module module (spare - EMI)
03
BD35F 195B0722 195B0744 35.9 101N0212 101N0510
BD50F 195B0723 - 52.5 101N0212 101N0510
LBP / MBP
BD80F 195B0742 - 78 101N0390 -
BD250GH 195B0748 - 78 101N0390 - 04
AC plug for BD compressor - 105N9531
BD Remote kit with 75cm. Cable - 105N9100

1) Condesning temperature : 55, Evaporating temp: -25, Suction gas temp: 32, Liquid temperature: 55 gas temp: 32, Liquid temperature: 55
05

06

07

08

09

10

11

12

13

Quick Selection Catalogue 91

14
Secop reciprocating compressors produced for
Danfoss- Light commercial
Specially optimised for use in household and light commercial Compressor models are available for R134a, R290, R404A / R507A and
applictions, hermetic reciprocating compressors from Secop for R600a, for cooling needs from 20W to 6kW.
Danfoss provide high cooling capacity in an energy saving design.

Features
Reciprocating
compressors

Compact construction Wide voltage range

Low GWP
Durable housing refrigerant possible

Optimised motor Variable speed model

technology available

Facts

Applications: Refrigerants: Benefit:

• Laboratory and medical equipment • R134a • Easy installation
• Compressed air dryers • R290 • Low noise and high energy efficiency
• Glass door merchandisers • R404A • Robust in tough operating conditions
• Display cabinets • R507A • Immune to unstable power supply
• Fridges and freezers • R600a • Environmentally friendly solutionsPortable
• Ice cream cabinet beyond traditional limits
• Vending machines Capacity range: • Application possible at extreme voltage
• Drink dispensers • 20-6k W rate
• Ice making machines
• Bottle coolers Segment usage:
• Heat pumps • Household and light commercial
• Milk cooling tanks application

92 Quick Selection Catalogue

 01
Technical data and ordering
R134a 02
Electrical equipments

LST(RSIR) HST (CSIR) HST (CSR) LST / HST

Ordering
Compressor Capacity (W)
Compressors Displacement PTC Starting Starting
Application single pack condition a Starting relay Starting unit
model
with HST
equipment
listed
(cm3) device capacitor
Cord relief Cover
03
spades spades spades

6.3 mm 6.3 mm 6.3 mm 6.3 mm

PL35G 195B0245 28 2.00 103N0011 117U6021 117U5014 - 103N1010 -

TL3G 195B0006 41 3.13 103N0011 117U6009 117U5014 - 103N1010 103N2010 04
TL4G 195B0008 58 3.86 103N0011 117U6004 117U5014 - 103N1010 103N2010
TL5G 195B0011 79 5.08 103N0011 117U6000 117U5014 - 103N1010 103N2010
FR6G 195B0023 83 6.23 103N0011 117U6000 117U5015 - 103N1010 103N2010
FR7.5G
FR8.5G
195B0024
195B0026
99
123
6.93
7.95
103N0011
103N0011
117U6001
117U6015
117U5015
117U5015
-
-
103N1010
103N1010
103N2010
103N2010
05
HBP / MBP / FR10G 195B0027 136 9.05 103N0011 117U6010 117U5015 - 103N1010 103N2010
LBP 1)
FR11G 195B0028 170 11.15 103N0011 117U6010 117U5015 - 103N1010 103N2010
SC10G 195B0043 113 10.29 - 117U6002 117U5017 - - -
SC12G 195B0050 175 12.87 - 117U6003 117U5017 - - - 06
SC15G 195B0053 164 15.28 - 117U6005 117U5017 - - -
SC18G 195B0059 283 17.69 - 117U6019 117U5017 - - -
SC21G 195B0636 333 20.95 - - - 117-7029 - -
SC12/12G 195B0051 350 2 × 12.87 - 117U6003 117U5017 - - - 07
PL50F 195B0001 40 2.50 - 117U6021 117U5014 - 103N1010 -
TL3FX 195B0005 54 3.13 103N0011 117U6007 117U5014 - 103N1010 103N2010
TL5FX 195B0009 82 5.08 103N0011 117U6004 117U5014 - 103N1010 103N2010
TLS5FX 195B0010 98 5.08 103N0011 117U6004 117U5014 - 103N1010 103N2010
08
TLS6F 195B0012 104 5.70 103N0011 117U6004 117U5014 - 103N1010 103N2010
TLS7FX 195B0224 120 6.49 103N0011 117U6000 117U5014 - 103N1010 103N2010
NL6FX 195B0165 110 6.13 103N0011 117U6004 117U5015 - 103N1010 103N2010
LBP 2)
NL7FX 195B0176 136 7.27 103N0011 117U6000 117U5015 - 103N1010 103N2010
NL7FK 195B0091 136 7.27 103N0011 117U6000 117U5015 - 103N1010 103N2010
09
NL9FK 195B0092 155 8.35 103N0011 117U6001 117U5015 - 103N1010 103N2010
NL11FX 195B0093 200 11.15 103N0011 117U6002 117U5015 - 103N1010 103N2010
SC15FX 195B0052 230 15.28 - 117U6003 117U5017 - - -
SC18FX 195B0057 280 17.69 - 117U6005 117U5017 - - - 10
SC21FX 195B0047 335 20.95 - 117U6019 117U5017 - - -
NL7.3MF 195B0370 304 7.27 103N0011 117U6016 117U5015 - 103N1010 -
NL10MF 195B0275 441 10.10 103N0011 117U6022 117U5018 - 103N1010 -
MBP 3)
GS26MFX 195B0433 1266 26.30 - - - 117-7055 - -
11
GS34MFX 195B0435 1648 33.80 - - - 117-7056 - -
FR7GH 195B0167 525 6.93 - 117U6016 117U5015 - 103N1010 -
HBP 4)
SC10GH 195B0142 762 10.29 - 117U6005 - - - -
SC15GH 195B0144 1139 15.28 - 117U6011 - - - -
12
Note: LST- Low starting torque= PTC relay only
HST- high starting torque= starting relay + capacitor.

1)- Condesning temperature : 55, Evaporating temp: -25, Suction gas temp: 32, Liquid temperature: 55
2)- Condesning temperature : 55, Evaporating temp: -25, Suction gas temp: 32, Liquid temperature: 55
3)- Condesning temperature : 55, Evaporating temp: -10, Suction gas temp: 32, Liquid temperature: 55
13
4)- Condesning temperature : 55, Evaporating temp: 5, Suction gas temp: 32, Liquid temperature: 55

Quick Selection Catalogue 93

14
Technical data and ordering
R404A & R507
Electrical Equipment
Ordering
code HST (CSIR) HST (CSR) LST / HST
Displacement
Compressors Cooling Starting Starting
Application Starting relay
model Compressor capcity (W) capacitor device
Single package Cord relief Cover
with HST spades spades
equipement
cm3 6.3 mm 6.3 mm 6.3 mm

TL4CL 195B0021 142 3.86 117U6000 117U5014 - 103N1010 103N2010

FR6CL 195B0031 243 6.23 117U6015 117U5015 - 103N1010 103N2010
FR7.5CL 195B0398 262 6.93 117U6016 117U5015 - 103N1010 103N2010
FR8.5CL 195B0038 290 7.95 117U6010 117U5015 - 103N1010 103N2010
NL7CLX 195B0350 340 7.27 117U6002 117U5015 - 103N1010 103N2010
SC10CLX 195B0074 360 10.29 117U6005 117U5017 - 103N1004 103N2008
SC12CL 195B0076 637 12.87 117U6005 117U5017 - 103N1004 103N2009
LBP 1)
SC15CL 195B0088 780 12.87 - 117U5017 - 103N1004 103N2008
SC18CL 195B0066 995 17.68 117U6013 117U5012 - 103N1004 103N2009
SC21CLX 195B0640 813 20.95 - - 117-7027 103N1004 103N2009
GS26CLX 195B0427 1240 26.3 - - 117-7056 - -
GS34CLX 195B0439 1715 33.8 - - 117-7074 - -
SC15/15CL 195B0109 1230 2X15.28 117U6019 117U5017 - 103N1004 103N2009
SC21/21CL 195B0644 1636 2X20.95 - - 117-7027 103N1004 103N2009
NF7MLX 195B0443 635 7.27 117U4139 117U5018 - 2×117U0349 117U1021
SC10MLX 195B0345 855 10.29 117U6011 117U5017 - 103N1004 103N2008
SC12MLX 195B0323 1038 12.87 117U6011 117U5017 - 103N1004 103N2008
SC15MLX 195B0391 1285 15.28 117U6013 117U5012 - 103N1004 103N2009
MBP 2) SC18MLX 195B0652 1497 17.68 - - 117-7027 103N1004 103N2009
SC18MLX.3 195B0653 1557 17.68 - - 117-7027 103N1004 103N2009
GS21MLX 195B0436 1748 21.2 - - 117-7070 - -
GS26MLX 195B0437 2254 26.3 - - 117-7072 - -
GS34MLX 195B0438 2953 33.8 - - 117-7056 - -
TL4DL 195B0166 527 3.86 117U6001 117U5014 - 103N1010 103N2010
FR6DL 195B0032 840 6.23 117U6010 117U5015 - 103N1010 103N2010
SC10DL 195B0075 1450 10.29 117U6005 117U5017 - 103N1004 103N2009
HBP 3) SC12DL 195B0077 1890 12.87 117U6019 117U5017 - 103N1004 103N2009
SC15DLX 195B0641 2210 15.28 117U6019 117U5017 - 103N1004 103N2009
SC10/10DL 195B0111 2900 2X10.29 117U6005 117U5017 - 103N1004 103N2009
SC12/12DL 195B0112 3780 2X12.87 117U6019 117U5017 - 103N1004 103N2009

1)- Condesning temperature : 45, Evaporating temp: -25, Suction gas temp: 32, Liquid temperature: 45
2)- Condesning temperature : 45, Evaporating temp: -10, Suction gas temp: 32, Liquid temperature: 45
3)- Condesning temperature : 45, Evaporating temp: 5, Suction gas temp: 32, Liquid temperature: 45

94 Quick Selection Catalogue

 01
Technical data and ordering
R600a 02
Electrical Equipment

LST (RSIR) & (RSCR) Run capacitor LST / HST

Compressor
PTC device with Optional or
Compressors single pack Capacity Displacement PTC Starting
Application
model with HST
equipment
(W) 1) (cm3) device
run capacitor
connector
compulsary
(refer data sheet) 03
Cord relief Cover
spades

6.3 mm 4.8 mm 6.3 mm

LBP / MBP TLES9KK.2

NLX13KK.2
195B0228
195B0456
110
167
8.83
13.25
103N0011
-
103N0021
103N0021
117-7117
-
103N1010
103N1010
103N2010
103N2010
04
LBP NLX15KK.2 195B0506 192 14.65 - 103N0021 - 103N1010 103N2010
NLE15KK.4 195B0374 190 14.65 103N0011 103N0021 117-7117 103N1010 103N2010

1)- Condesning temperature : 45, Evaporating temp: -25, Suction gas temp: 32, Liquid temperature: 55
05
R290
Electrical Equipment

LST (RSIR) LST(RSCR) Run capacitor HST (CSIR) LST / HST 06

Dispalcement
Compressors
Application

Compressor PTC Starting PTC device

Capacity
model

single pack device w/o with run 1 optional Starting Starting

(W)1)

with HST run capacitor capacitor 2 compulsory relay capacitor

equipment connector connector
Cord relief Cover

cm3 07
cm3 6.3 mm 4.8 mm 6.3 mm 6.3 mm 6.3 mm

LBP / MBP DLE7.5CN 195B0728 290 0.27 103N0011 103N0021 117-7117 117U7002 117U5015 103N1010 103N2010
SC12CNX.2 195B0458 45 2.87 - - - - 117U5017 - -
LBP
SC18CNX.2 195B0489 689 7.69 - - - - 117U5017 - - 08
1)- Condesning temperature : 45, Evaporating temp: -25, Suction gas temp: 32, Liquid temperature: 45

Accesories
09
Descirption Code

Bolt joint (M6 metric) 118-1917

Snap on (Ø 7.3 mm) 118-1919
Clip
Steel Pin
118-3585
118-3586
10
Washer Ø 21 x Ø 8.1 mm x 0.9 mm 118-3588
Rubber grommet 16 mm 118-3661
Rubber grommet 19 mm 118-3666
11

12

13

Quick Selection Catalogue 95

14
MTZ / NTZ, Reciprocating compressors
Maneurop® MTZ series compressors are of the hermetic Available in a large variety of single and tandem models for
reciprocating type and are designed for medium and high refrigerants R404A, R134a, R407A/F, R407C, R448A, R449A, R452A and
evaporating temperature applications. R513A, the compressors fit in lots of different applications.
NTZ are designed for low evaporating temperature applications.

Features
MTZ / NTZ

High level suction inlet

Large internal volume,

large oil sump, sturdy
design
100% suction
gas-cooled motor
Internal pressure relief valve

Internal motor protection

Superstrong epoxy
coated motor winding

High efficiency
circular valve design

PTC crankcase heater

Discharge line
sump heater

Impact resistance valves

Oil sign glass

Facts

Applications: Segment usage:

• Walk-in freezers and cold rooms • Airconditioning Capacity range:
• Frozen food processing and storage • Refrigeration MT (NTZ) • 0.25 – 45 kW
• Ice cream machines • 1.4 – 9.150kW (NTZ)
• Display cabinets Refrigerants:
• Water chillers • R134a Benefit:
• Large packaged air conditioners • R407F • Operation under extreme conditions
• Process chillers • R407A • Versatile
• Industrial air-con • R404A (NTZ) • No need for air circulation around
• R452A (NTZ) thecompressor
• R507A • Long lifetime expectancy and reliability
• R407C
• R448A
• R449A
• R513A

96 Quick Selection Catalogue

 01
Technical data and ordering
MTZ
02
Reciprocating compressors
Cooling capapcity (W) Code no.

No of cylinders
Refrigeration 1) High temp 2) Oil Displacemnt
Compressor
Charge (m3/h)
model
R404A/
R407A R134a R407F
R448A/
R452A R513A R513A R407C R134a
(dm3) @2900
400 / 3 / 50 230 / 1 / 50
Volts / Phase / Hz Volts / Phase / Hz 03
R507 R449A

MTZ018 1910 1740 1075 1850 1840 2000 1181 2757 3470 2532 1 0.95 5.3 MTZ18-4VI MTZ18-5VI
MTZ022 2630 2390 1408 2540 2580 2810 1546 3526 4550 3335 1 0.95 6.6 MTZ22-4VI MTZ22-5VI
MTZ028 3430 3130 1823 3320 3180 3250 1949 4426 5890 4217 1 0.95 8.4 MTZ28-4VI MTZ28-5VI
04
MTZ032 3980 3640 2076 3860 3660 3790 2318 5107 6650 4907 1 0.95 9.4 MTZ32-4VI MTZ32-5VI
MTZ036 4670 4260 2753 4520 4250 4300 2670 6010 7510 6013 1 0.95 10.5 MTZ36-4VI MTZ36-5VI
MTZ040 5330 4890 2914 5170 4880 5090 3169 6888 8660 6342 1 0.95 11.8 MTZ40-4VI –
MTZ044 5370 4890 2926 5200 5010 5370 3183 7380 9130 6836 2 1.8 13.3 MTZ44-4VI –
MTZ050 6260 5700 3364 6060 5700 6110 3621 8085 10420 7956 2 1.8 14.9 MTZ50-4VI –
05
MTZ056 6710 6120 3526 6500 6340 6790 3822 8894 11680 8621 2 1.8 16.7 MTZ56-4VI –
MTZ064 7980 7270 4192 7730 7330 7840 4419 10141 13360 10057 2 1.8 18.7 MTZ64-4VI –
MTZ072 8920 8130 4873 8640 8440 9020 5037 11436 15320 11543 2 1.8 21 MTZ72-4VI –
MTZ080 10470 9540 5857 10140 10010 9680 5700 12963 17380 13262 2 1.8 23.6 MTZ80-4VI – 06
MTZ100 12280 11200 6617 11900 11310 12310 7150 15950 20480 15452 4 3.9 29.8 MTZ100-4VI –
MTZ125 15710 14330 8306 15220 15220 16070 9614 21058 26880 18941 4 3.9 37.5 MTZ125-4VI –
MTZ144 18490 16870 10732 17910 17560 17830 10999 23855 29770 23536 4 3.9 42.1 MTZ144-4VI –
MTZ160 20310 18520 11900 19670 20140 19880 12490 26641 34090 25779 4 3.9 47.3 MTZ160-4VI –
07
1) Refrigeration: 50 Hz, EN12900 ratings To = -10°C, Tc = 45°C, SC = 0K, SH = 10K
2) High temp : 50 Hz, EN12900 ratings To = 5°C, Tc = 50°C, SC = 0K, SH = 10K

NTZ 08
Reciprocating compressors
Cooling capapcity (W) Code no.
Compressor Oil
Refrigeration 1) No of cylinders
model Charge (dm3) 400 / 3 / 50 230 / 1 / 50
R404A R452A
Volts / Phase / Hz Volts / Phase / Hz 09
NTZ048 1493 1484 1 0.95 120F0226 120F0228
NTZ068 2446 2442 1 0.95 120F0230 120F0232
NTZ096 2955 3085 2 1.8 120F0234 –
NTZ108 3583 3761 2 1.8 120F0238 – 10
NTZ136 4565 4747 2 1.8 120F0236 –
NTZ215 7046 6942 4 3.9 120F0240 –
NTZ271 9701 9150 4 3.9 120F0242 –

1) Refrigeration: 50 Hz, EN12900 ratings To = -25°C, Tc = 45°C, SC = 0K, SH = 10K 11

12

13

Quick Selection Catalogue 97

14
MLZ / LLZ, Scroll compressors for refrigeration
MLZ and LLZ scroll compressors are dedicated to commercial and MLZ: medium-temperature scroll compressors
light commercial refrigeration applications with refrigerants R134a, R404 / R507A, R407A / F, R134a, R448A, R449A, R452A, R22
R404A / R507A, R22, R407A. Both brazed and rotolock connections LLZ: low-temperature scroll available with and without liquid
are available for most of the compressors. injection and operate with R404A, R507A, R452A.

Features
MLZ / LLZ

Optional sound jacket

attenuates sound levels

High efficiency motor

Multi-refrigerant scrolls
save on inventory

Optimised pressure ration for

refrigeration applications Suitable for transport of
refrigerated goods

Optimized scroll design

Vapor injection available
with optional economizer kit
increases LLZ efficiency and
HOOP overload protection cooling capacity
Rotalock or braze connections

MLZ LLZ

Facts

Applications: Refrigerants: Benefit:

• Walk-in freezers and cold rooms • R404A • Footprint up to 30% smaller than
• Frozen food processing and storage • R507A alternative reduces the logistics costs and
• Blast freezers • R407A/F frees up space in the system
• Low temperature racks • R448A • 30% fewer parts which improves the
• Ice cream machines • R449A reliability of the compressor
• Display cabinets • R452A • Optional vapor injection boosts the
• Water chillers • R134A cooling capacity and efficiency by more
• Large packaged air conditioners • R513A than 20% on LLZ
• Process chillers etc • Better reliabiltiy with improved overload
Capacity range: protection and oil injection
Segment usage: • 0.5 – 12.5 TR / 1.8 – 44 kW
• Refrigeration MT & LT

98 Quick Selection Catalogue

 01
Technical data and ordering
MLZ
02
Scroll compressors
Cooling capacity (W) 1) Code no.
Compressors
model 400 / 3 / 50 230 / 1 / 50
R404A / R507A R448A R407A/F R134a (2)
Volts / Phase / Hz Volts / Phase / Hz
03
MLZ015 3300 3200 3100 2000 121L8629 121L8631
MLZ019 4500 4200 4000 2500 121U8004 121U8026
MLZ021 4700 4400 4200 2700 121L8633 121L8635
MLZ026
MLZ030
5800
7100
5500
6600
5300
6500
3300
4000
121L8637
121L8641
121L8639
121L8643
04
MLZ038 8400 7800 7500 4700 121L8645 –
MLZ045 10200 9700 9100 5900 121L8649 –
MLZ048 11100 10400 10000 6200 121L8651 –
MLZ058 13000 12200 11500 7400 121L8653 – 05
MLZ066 15100 14200 13400 8600 121L8657 –
MLZ076 17300 15200 14700 9600 121L8655 –

1) at EN12900 conditions: Te= -10 °C, Tc= 45 °C, RGT= 20 °C, SC= 0K
06
LLZ
Scroll compressors
Cooling capacity (W) 1)

Code no.
07
With economizer /
Compressors Without economizer / no injection Liquid injection 2)
vapour injection
model

400 / 3 / 50
R404A R452A R448A/ R449A R448A/R449A R404A
Volts / Phase / Hz

LLZ013 3536 3295 3053 3053 5662 121L9535

08
LLZ015 4295 3993 3910 3910 6724 121L9537
LLZ018 5050 4745 4577 4577 8010 121L9539
LLZ024 6451 5876 5549 5549 10060 121L9541
LLZ034 8695 8615 7840 7840 13340 121L9543 09
1) At EN12900 conditions: Te= -25°C, Tc= 45 °C, SH= 10K, SC= 0K
2) Liquid injection will have same capacity as no injection but will have extended operating envelope

10

11

12

13

Quick Selection Catalogue 99

14
H-Series, Scroll compressor
Danfoss scrolls are designed for excellence in performance, silence Available in a large variety of single and tandem models for
and endurance. They feature compressors that are among the refrigerants R407C, R134a, R410A and R22, the compressors combine
quietest, most efficient, reliable and available on the market. high energy efficiency with low sound and minimal vibration.
Ranging from 2.5 – 10 TR, the universal dimension, footprint and
connections of the H series make it the natural choice for greater
comfort in existing or new residences.

Features
H-Series

Lifting lug for

models up to 7 TR
Discharge tube Check valve

Fixed scroll Orbiting scroll

Terminal cover Slider block

Counterweight
Electric terminal

Rotor

Stator

Eccentric shaft

Shell
Lower bearing
Magnet

Facts

Applications: Refrigerants: Benefit:

• Small to medium packaged air • R134a • Excellent reliability due to Patented
conditioners for commerial purpose • R407C internal protection combined with HOOP
• R410A (Hot Oil Over Protector) thermal valve
Segment usage: • R22 • Standard dimensions and tubing: ideal for
• Airconditioning both new installations and replacement
Capacity range: markets
• 0.25 – 20 TR / 1.07 – 34 kW • No startup and shutdown noise

100 Quick Selection Catalogue

 01
Technical data and ordering
H-Series
02
Scroll compressors
Cooling capacity (W) 1) Code no.
Compressors
Oil Charge (dm )
3
Net weight (kg)
model 400 / 3 / 50 230 / 1 / 50
R407C
Volts / Phase / Hz Volts / Phase / Hz
03
HRP025 5730 1.06 31 121L3088 -
HRP034 7 940 1.06 31 121L2024 120U2019
HRP038 8 840 1.06 31 120U1006 -
HRP040
HRP047
9 110
11 130
1.06
1.33
31
31
120U1016
120U1046
120U1929
120U0986
04
HRP058 13 470 1.57 37 - 120U1596
HRP060 13 860 1.57 37 121L1726 120U1606
HLP068 15 700 1.57 37 120U2014 120U1621
HLP072 16600 1.57 37 120U2072 - 05
HLP075 18000 1.57 37 120U1766 -
HLP081 19500 1.57 37 121L1781 120U1651
HCP094 21600 2.66 44 121L0601 -
HCP109 26000 2.66 45 121L0376 -
06
HCP120 28100 2.66 45 121L0401 -

1) Te= 7.2°C, Tc= 54.4 °C, SH= 11.1K, SC= 8.3K

Cooling capacity (W) 1) Code no.

07
Compressors
Oil Charge (dm3) Net weight (kg)
model 460 / 3 / 50 230 / 1 / 50
R410A
Volts / Phase / Hz Volts / Phase / Hz

HRH029 7100 1.06 31 120U2287 –

HRH032 7700 1.06 31 120U1196 120U1171
08
HRH036 8800 1.06 31 120U1201 120U1176
HRH038 9300 1.06 32 – 120U1181
HRH040 10200 1.33 32 – 120U1186
HRH041 10000 1.57 37 120U1356 – 09
HRH044 10800 1.57 37 120U1361 –
HRH049 12100 1.57 37 121L1366 –
HRH051 12900 1.57 37 121L1371 120U1326
HRH054
HRH056
13300
13800
1.57
1.57
37
37
–
120U1381
120U1331
–
10
HLH061 14800 1.57 37 121L2052 (2) 120U2047
HLH068 16900 1.57 37 121L1391 120U1341
HLJ072 17800 1.57 37 121L1396 –
HLJ083 20400 1.57 37 121L1401 – 11
HCJ091 22380 2.66 45 121L3113 –
HCJ105 26000 2.66 45 120U2578 –
HLJ106 26050 2.66 49 121L3115 –
HCJ120 29 610 2.66 49 120U2342 – 12
HCJ121 29 720 2.46 49 121L3117 –

All compressors have brazed connections, spade terminals

1) Te= 7.2°C, Tc= 54.4 °C, SH= 11.1K, SC= 8.3K

2) Brazed connections, screw terminals
13

Quick Selection Catalogue 101

14
SH / SY / SZ, S-Series, Scroll compressors
By combining an in-depth understanding of customer needs with Available in a large variety of single and manifold models for R410A,
continuous investment in product technology Danfoss is able to offer R407C, R134a and R22. The compressors combine high energy
you the SH / SY / SZ series, which comprise a 7-30TR industry- efficency with low sound and minimal vibration.
leading range of scroll compressors optimized for rooftop and chiller
applications.

Features
SH / SY / SZ

Heat shield that lowers

the heat transfer between
Heat shield that lowers discharge and suction gas
the heat transfer between and the acoustic level
discharge and suction gas
and the acoustic level Intermediate discharge
valves (SH485)
New PTFE spring seal
for even lower leaks
Integrated discharge gas
temperature protection
Patented motor cap (SH485)

Liquid slug protection per suction

fitting in upper position
Patented motor
centring spacer

Patented gas path flow

Improved lower (SH485)
bearing centring

Facts

Applications: Refrigerants: Benefit:

• Rooftop • R134a • Greater reliability with the internal non-
• Process chiller • R410A return valve, which avoids refrigerant
• Ducted split air-con • R407C migration from the high pressure side
• IT cooling • Highly efficient and reliable protection
• Chiller application Capacity range: against overheating, overloading, phase
• 7.5 – 40 TR / 26 – 140 kW loss and phase order with specific
Segment usage: electronic module protection
• Airconditioning & High temp. • Quieter and more efficient operation with
"no contact – no wear" scroll design for
reduced friction

102 Quick Selection Catalogue

 01
Technical data and ordering
SH
02
Scroll compressors
Nominal cooling capacity (W) 1) Code no.
Compressors Displacemnet m3/h
Oil charge (dm )
3
Net weight (kg)
model @ 2900 400 / 3 / 50
R410A Volts / Phase / Hz
03
SH090 22300 3 58 15.404 120H0003
SH105 26800 3.3 64 18.09 120H0211
SH120 30000 3.3 64 20.3 120H0013
SH140
SH161
34700
38800
3.3
3.3
67
69
23.1
26.39
120H0201
120H0023
04
SH184 44700 3.6 71.5 29.59 120H0361
SH180 44500 6.7 108 29.59 120H0275 4)
SH240 59700 6.7 108 39.58 120H0291 3)
SH295 2) 73200 6.7 111 48.11 120H0827 4) 05
SH380 90500 6.7 159 60 120H0255 4)

SH485 116400 6.7 175 77 120H1064 4)

1) Te= 7.2°C, Tc= 54.4 °C, SH= 11.1K, SC= 8.3K

2) SH295 replaces SH300. SH300 model remains available for after-market 06
3) Module 24V AC (Electronic motor protection module located in terminal box)
4) Module 110 - 240V (Electronic motor protection module located in terminal box)

SY / SZ
Scroll compressors
07
Nominal cooling capacity (W) 1) Code no.
Compressors Displacemnet m3/h
Oil charge (dm )
3
Net weight (kg)
model @ 2900 400 / 3 / 50
R407C R134a
Volts / Phase / Hz
08
SZ084 19300 13630 3.25 64 19.9 SZ084-4VI
SZ090 20400 14520 3.25 65 21 SZ090-4VI
SZ100 21600 15500 3.25 65 22.1 SZ100-4VI
SZ110 24600 17550 3.25 73 25.1 SZ110-4VI
SZ120 28600 20260 3.25 73 29 SZ120-4VI
09
SZ148 35100 24370 3.6 88 34.6 SZ148-4VAI
SZ161 38000 26060 3.6 88 37.7 SZ161-4VAI
43100 30440 6.2 100 43.5 SZ185-4CAI
SZ185
43100 30440 6.2 100 43.5 SZ185-4RI 3) 10
59100 40450 8 150 60.5 SY240A4PBI 3)

SY240 2)
59100 40450 8 150 60.5 SY240A4CBI
SY300 2) 72730 50410 8 157 76.1 SY300A4PBI 3)

SY380 2)
89540 63260 8.4 158 92.4 SY380A4CAI
11
89540 63260 8.4 158 92.4 SY380A4CBI

1) Te= 7.2°C, Tc= 54.4 °C, SH= 11.1K, SC= 8.3K

2) SY240-300-380 has replaced SZ240-300-380 compressors
3) Rotolock version
12

13

Quick Selection Catalogue 103

14
Overview of lubricant / oil types
Recommended to reduce friction, reduce abrasion of mobile pieces of compressors and protect them against corrosion.

Features
Lubricant / oil

Facts

Type: Features:
• Mineral • Obtained per distillation of the petroleum
• Synthetic • Produced from chemical and
• Semi-synthetic petrochemical compound
• Blend of different oil bases

104 Quick Selection Catalogue

 01
Technical data and ordering
Lubricant / oil types
02
Packaging
Type Description Application Code no.
Type Quantity

160P Mineral oil, 160P, 2 liter can SM, MT, MLM116 Multipack 8 7754001
160P Mineral oil, 160P, 2 liter can SM, MT, MLM116 Multipack 4 7754002 03
160SZ POE lubricant, 160SZ, 2.5 liter can SZ, SH, PSH, WSH, DSH, VZH088-117-170, VSH088-117-170 Multipack 4 120Z0571
320SZ POE lubricant, 320SZ, 2.5 liter can SY Multipack 4 120Z0572

DCJ, HRP, HLP, HCP, HRH, HLH, HLJ, HCJ, HHP, MLZ/LLZ,
320HV PVE lubricant, 320HV (FVC68D), 1 liter can Single pack 1 120Z5034
VZH028-035-044, VZH052-065**, MLZ116

175PZ POE lubricant 175PZ, 2.5 liter can MTZ, NTZ, VTZ Multipack 4 120Z0639
04
175PZ POE lubricant 175PZ, 1 liter can MTZ, NTZ, VTZ Multipack 12 120Z0638
215PZ POE lubricant 215PZ (RL46HB), 1 liter can MLZ evolution index A LLZ evolution index A VLZ028-035-044 Multipack 12 120Z0648

Attention:
Always use the original specific oil for each compressor model . The use of a different oil specified can lead to compressor failure .
Special attention should be given to the management of the polyolester oil as this is highly hygroscopic and when exposed, quickly
05
absorbs moisture from the air. Do not let the compressor or the oil packaging open to the atmosphere for a long period.

06

07

08

09

10

11

12

13

Quick Selection Catalogue 105

14
Spare parts and accessories

Discharge thermostat kit

Application Description Code no.

All models Discharge thermostat kit 7750009

Crankcase heater
Application Description Code no.

All MTZ/MT/NTZ/VTZ models PTC heater 27W 120Z0459

All recip 1 cyl Belt type crankcase heater, 54W, 230V, CE mark, UL 7773106
LLZ all models, VZH028-035-044 Belt type crankcase heater, 55/70W, 400/460V, CE mark, UL 120Z5041
MLZ/MLM 015-019-021-026 Belt type crankcase heater, 70W, 240V, CE mark, UL 120Z5040
HRM025-047, HRP025-047, HRH029-050 Belt type crankcase heater, 40W, 230V, CE mark, UL 120Z0055
VSH088.117 & VZH088.117 Belt type crankcase heater, 65W, 230V, CE mark, UL 120Z0038
SM/SZ175-185 & SH180-240 to 485, VSH170 & VZH170, All recip 4 cyl Belt type crankcase heater, 75W, 110V, CE mark, UL 7773110
SM/SZ175-185 & SH180-240 to 485, VSH170 & VZH170, All recip 4 cyl Belt type crankcase heater, 75W, 230V, CE mark, UL 7973005
SM/SZ175-185 & SH180-240 to 485, VSH170 & VZH170, All recip 4 cyl Belt type crankcase heater, 75W, 230V, CE mark, UL 7773108
SM/SZ175-185 & SH180-240 to 485, VSH170 & VZH170, All recip 4 cyl Belt type crankcase heater, 75W, 400V, CE mark, UL 7773118
SM/SZ084-161, VSH088.117 & VZH088.117, All recip 2 cyl Belt type crankcase heater, 65W, 400V, CE mark, UL 7773117
SM/SZ084-161, VSH088.117 & VZH088.117, All recip 2 cyl Belt type crankcase heater, 65W, 230V, CE mark, UL 7773107
SM/SZ084-161, VSH088.117 & VZH088.117, All recip 2 cyl Belt type crankcase heater, 65W, 230V, CE mark, UL 7973002
SY/SZ240-380 Belt type crankcase heater, 130W, 400V, CE mark, UL 7773123
SY/SZ240-380 Belt type crankcase heater, 130W, 230V, CE mark, UL 7773122

Accoustic hood
Application Description Code no.

MT(Z)18-40 & NTZ048-068 Single pack 1 Slim acoustic hood for 1 cyl 120Z0575
MT(Z)44-81 & NTZ096-136 Single pack 1 Slim acoustic hood for 2 cyl 120Z0576
MT(Z)100-160 & NTZ215-271 Single pack 1 Slim acoustic hood for 4 cyl 120Z0577
SM/SZ084.090.100 Single pack 1 Acoustic hood for scroll compressor 7755011
SM/SZ110.120 Acoustic hood for scroll compressor 7755010
SM/SZ148*.161* Acoustic hood for scroll compressor 7755017
SY/SZ240.300 Acoustic hood for scroll compressor 7755016
SM/SZ175.185 Acoustic hood for scroll compressor 7755007

106 Quick Selection Catalogue

 01
Spare parts and accessories

Capacitor & relay

02
Application Description Code no.

HRM032-047, HRP034-047, HRH029-040 all code 5, HHP015.019.021.026 Start capacitor 250V, 145-175 μF 120Z0399
HRM051-054, HRP051-054 all code 5, HHP030 Start capacitor 250V, 161-193 μF 120Z0400 03
HRM045-047, HRP045-047, HRH038-040 all code 5, HHP019-021 Run capacitor 440V, 60 μF 120Z0050
HRM054-060, HLM068-081, HRP054-060, HLP068-081, HRH051-056, HLH068,
Run capacitor 440V, 55 μF 8173234
HLJ072-083 all code 5, HHP038, MLZ/MLM038.042
HHP015 Run capacitor 440V, 40 μF 8173231
HRM032-042, HRP034-042, HRH029-036 all code 5, HHP026 Run capacitor 440V, 70 μF 120Z0051 04
MLZ/MLM038.042 Start capacitor 330V, 88-108 μF (98 μF) 8173001
MT(Z)18-81, SM/SZ084-110 & SH090 & WSH090 & PSH019 Electronic soft start kit, MCI 15 C 7705006
MT(Z)100-160, SM/SZ115-185 & SH105-184 & WSH105-184 &
Electronic soft start kit, MCI 25 C 7705007
PSH023.026.030.034.039

MT(Z)18-5, 22-5, 28-5 & NTZ 048-5, 068-5 Permanent capacitors 440V, 20 μF, 10 μF 7701026
05
MT(Z)32-5, 36-5 Relay + Capacitors: run (25 + 10 μF), start (140 μF) 7701023

06
Terminal box
Application Description Code no.

HRM, HLM, HCM, HRP, HLP, HCP, HRH, HLH, HLJ, HHP Square terminal box (C & Q version) 120Z5018
HRM, HLM, HCM, HRP, HLP, HCP, HRH, HLH, HLJ, HHP Round terminal box (P & T version) 120Z5015 07
HRM, HLM, HCM, HRP, HLP, HCP, HRH, HLH, HLJ, HHP, HHP030.038.045 IP54 upgrade kit for square terminal box 118U0057
SH180.240.295.300.380*.485*, SY/SZ240.300.380 - SY/SZ185 with module Terminal box 210 x 190 incl. cover 120Z0458

SM084.090.100.110.112.120.124.147.148*.161*
SZ084.090.100.110.120.148*.161*
SH090.105.120.140*.161*
Service kit for terminal box 96 x 115 mm, including 1 cover, 1 clamp 8156135
08
WSH090.105.120.140*.161*

SM/SZ148-3.161-3.175.185 Terminal box 186 x 198 mm, incl cover 8156139

MT/MTZ18-44(1),18-73(3), 18-81(4), 18-50(5), 18-40(6), 32-56(7), 22-80(9) &
Cover 80 x 96 mm ; clamp 8156134
NTZ048-136 (except 136-1)

09

Mounting kit
Application Description Code no. 10
MT/MTZ18-81 & NTZ048-136 Mounting kit 1 & 2 cyl; Ebox: 80 x 96 mm; Sleeves 5/8”- 1/2” 8156001
Mounting kit for 4 cylinder compressor & MS, including 4 grommets,
MT/MTZ100-160 & NTZ215-271 8156007
4 bolts Ebox: 96 x 115 mm; Sleeves 1” 1/8 - 3/4”

Mounting kit for 1 scroll compressor including 4 hexagonal rigid

SH180 - 240 to 485 in parallel installation, PSH051.064.077
spacers, 4 sleeves, 4 bolts, 4 washers
7777045
11

12

13

Quick Selection Catalogue 107

14
One Supplier Covers
your Industrial Refrigeration Needs
Danfoss has made a clear priority to be able to supply all types of Whether your industrial refrigeration plant is a manual system or a
components for industrial refrigeration. Having just one place to go highly-automated system, you will be sure to find a Danfoss solution
for industrial refrigeration is a significant benefit. Danfoss' that exactly matches your project needs in our wide range for
one-stop-shop concept makes constructing as well as servicing fast industrial refrigeration. With the support of our online tools and our
and easy and helps keep the part stock at a minimum. dedicated, local staff, we continuously strive to make your selection
of solutions safe and easy.

The FlexlineTM platform

The FlexlineTM platform is synonymous with flexibility within experience that each product features a variety of benefits, including
industrial refrigeration. Based on a modular design concept, you will easy selection, installation and maintenance.

ICF Flexline™ valve station ICFD Defrost Module SLV Flexline™ product platform
The Danfoss ICF FlexlineTM multi-ported control The liquid drain method is widely acknowledged The SVL Flexline™ product platform is targeted
solution offers you significant savings by as the most efficient hot gas defrost method to meet industrial refrigeration requirements
substituting a string of valves with just one within industrial refrigeration. The method worldwide. Using just two basic valve housings
valve station. Consisting of a valve housing and ensures that liquid condensate is drained at – a straightway and an angleway – the platform
a maximum of four or six function modules, the lowest possible pressure resulting in a reduction offers five different functions.
valve station is a true plug-and-play solution. of blow-by gas by up to 90%.

108 Quick Selection Catalogue

 01
ICV Flexline™ valves
The ICV product family consists of an ICS pilot operated control, ICM The modular concept greatly facilitates the building of a valve that
motor operated control and ICLX 2-step solenoid valve. All valve offers energy savings and reduction of down-time. All valves are
variants are based on one common valve body to offer outstanding designed for a maximum working pressure of 52 bar (754 psi) and 02
flexibility. efficiently handle CO₂ and other future high pressure refrigerants.

03

04

05
ICLX 2-step solenoid valve ICM motor operated valve ICS pilot operated servo valve
The ICLX valves are 2-step servo-operated main The ICM motor operated valves are very compact The ICS pilot operated servo valves are quick and
valves with pilot solenoid valves offering safe, and easy to handle. The ICM motor valve is simple to handle, install and service due to their
flexible and convenient installation, operation available as a complete valve and as parts low weight and compact design.
and service. programme.
06

07

08

ICSH, dual position solenoid valve New Danfoss Pilot Valve program

The ICSH dual position solenoid valve is designed

for ICS control valves
The new Danfoss Pilot Valve program for ICS
09
for gradual and safe opening of the hot gas flow control valves consist of just 4 fully backwards-
to the evaporator, featuring an extra-safety- compatible valves, which cover all regulation
configuration to prevent hydraulic shocks in the types and ranges needed in ammonia and CO2
system. applications.
10

11

12

13

Quick Selection Catalogue 109

14
Danfoss gas detection units for industrial refrigeration systems
The new Danfoss gas detectors are based on an intelligent The Danfoss gas detection portfolio enables you to
platform and intuitive user-interface, Danfoss’ complete line comply with regulations according to EN 378:2016, ISO
of fixed gas detectors range from basic to heavy duty models 5149:2014, IIAR 2-2017, and ASHRAE 15:2016 while providing
with sensor technology to match the specific refrigerant, comprehensive safety and easy-to-use features
application, and safety requirements of your system.

Evaporator control solution

The evaporator sub-system solution brings together Danfoss’ defrosting delivering improved energy efficiency and
efficient and reliable valves and controls to provide efficient reduced defrost cycle duration time. The system features a
and safe installation, operation & maintenance of the controller dedicated for industrial refrigeration requirements
evaporator sub-system. and applications which manages the steps in the defrost
The evaporator control solution is prepared for smart cycle. The solution offers a safe defrost process that meets
defrosting which provide an optimized hot gas defrost latest IIAR standards for hot gas defrost.
process to better schedule, control, start and terminate

Air purger
The Danfoss Intelligent Purger System is a new, stand-alone air system improving system efficiency and safety. With a compact, plug
purger solution for multi purging. The automatic purging function, & play design it provides fast and easy installation, saves space and
responds immediately to non-condensable gases in the refrigeration reduces overall cost.

110 Quick Selection Catalogue

 01
Complete industrial refrigeration solutions supplier for sensor, liquid level
regulating valves, safety valves, and switches.

02

03

AKS 4100 Liquid Level Sensor Liquid Level Control (AKS 38, HFI, SV, LLG) Safety Relief Valves (SFA, SFV, DSV,
04
BSV, POV)
Liquid Level Sensor with TDR Guided Radar Liquid level control is an important element in Danfoss Safety valves are designed to meet the
technology fully adapted to the Industrial the designing of industrial refrigeration systems. strict quality demands and safety requirements
Refrigeration segment – reliable and with high It controls the liquid injection to maintain a for refrigeration installations, specified by the
accuracy. constant liquid level. Danfoss offers Mechanical
and electro-mechanical solution suited for meet
international classification societies.
05
varying plant requirements.

06
Coming Soon

07
Switches and thermostats for Industrial Liquid Level Glasses Semi-welded plate heat exchanger
Refrigeration
Pressure controls and thermostats applicable
for industrial refrigeration applications including
LLG are liquid level glasses in ductile steel which
meets the strictest requirements on industrial
Danfoss semi-welded plate heat exchangers
are optimized for Ammonia industrial 08
ammonia as a refrigerant. and marine refrigeration installations applications systems such as Condensers,
flooded and pumped evaporators, Sub-coolers,
Desuperheaters, Superheaters, Economizers and
Oil coolers.

09

IR product information

10

11

12
IR products overview IR tools

13
If you need any further information, please email to [email protected]

Quick Selection Catalogue 111

14
Danfoss Infogram
Danfoss has created various of information graphics for you to visualise quickly on how to troubleshoot problems, tips and tricks for selecting
and installing products, working principal of products etc.

Cool Room Compressor Checkup

Tips

Overview of cold room Overview of compressor

types and products basic inspection

Compressor Danfos CoolApps

Replacement

What to remember when selecting Overview of Danfoss Cooling

a replacement compressor mobile app

Danfoss Learning Filter Driers and

Sight Glasses

Overview of number of cooling courses, Selection, troubleshooting, symptoms

registrations, training programs and of filter driers and sight glasses
benefits from Danfoss Learning

112 Quick Selection Catalogue

 01

02

03

04

ICF Valve Station Solenoid Valves 05

Troubleshooting

What's in it for contractors Troubleshooting, tips and tricks

06

07

08

KV Function Refrierant Trends

and Challenges 09
Danfoss KV valves overview Key drivers of the refrigerant agenda,
and how it works market observation related to refrigerant
prices and regulations
10

11

12

360° Solenoid Valve TXV Troubleshooting

Expansion valve troubleshooting,
tips and tricks
13
Selection and installation tips etc Expansion troubleshooting,
tips and tricks

Quick Selection Catalogue 113

14
 REFRIGERATION & AIR CONDITIONING
Automatic Controls | Electronic Controllers | Compressors

80 years
The industry’s widest
expertise at your
disposal.
We’ve been looking
ahead since 1933.

AF189286419730en-0301
AF189286419730en-AU0101 © Danfoss | DCS | 2019.07