Scribd
Upload
34 views

Match Data: Cableeye Wiring Report

Use this female-to-female cable in any application where you wish to connect two DTE devices (for example, two computers). A male-to-male equivalent of this cable would be used to connect two DCE devices.

Uploaded by

Relu Garban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views

Match Data: Cableeye Wiring Report

Use this female-to-female cable in any application where you wish to connect two DTE devices (for example, two computers). A male-to-male equivalent of this cable would be used to connect two DCE devices.

Uploaded by

Relu Garban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CableEye Wiring Report MATCH DATA 7-6-03 12:18 PM

Name: 3 DB9F-DB9F-S7X DB9 NULL MODEM

Print your company information here. Set up in Preferences / Print Options.


Socket L Socket R
DB9 Female DB9 Female
SH SH
1 1
6 6
2 2
7 7
3 3
8 8
4 4
5 5

NETLIST NOTES
L-SH R-SH DB9 NULL MODEM
L-1 L-7 R-8 Use this female-to-female cable in any
L-2 R-3 application where you wish to connect two
L-3 R-2 DTE devices (for example, two computers). A
L-4 R-6 male-to-male equivalent of this cable would be
L-5 R-5 used to connect two DCE devices.
L-6 R-4
L-8 R-1 R-7 The cable shown below is intended for RS232
asynchronous communications (most
PC-based systems). If you are using
synchronous communications, the null modem
will have additional connections for timing
signals, and a DB25 connector would be
necessary.

NOTE: Not all null modem cables connect


handshaking lines the same way. In this cable,
Request-to-Send (RTS, pin 7) asserts the
Carrier Detect (pin 1) on the same side and the
Clear-to-Send (CTS, pin 8) on the other side of
the cable.

This device may also be available in the form


of an adapter.

CableEyeTM by CAMI Research Inc. Conductivity Threshold: 2 Ω Isolation Threshold: 5 MΩ

You might also like