Scribd
Upload
28 views

DB9 Loopback Connector

A loopback connector usually consists of a connector without a cable and includes internal wiring to reroute signals back to the sender. This DB9 female connector would attach to a DTE device such as a personal computer. When the computer receives data, it will not know whether the signals it receives come from a remote DCE device set to echo characters, or from a loopback connector. Use loopback connectors to confirm proper operation of the computer's serial port.

Uploaded by

Relu Garban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views

DB9 Loopback Connector

A loopback connector usually consists of a connector without a cable and includes internal wiring to reroute signals back to the sender. This DB9 female connector would attach to a DTE device such as a personal computer. When the computer receives data, it will not know whether the signals it receives come from a remote DCE device set to echo characters, or from a loopback connector. Use loopback connectors to confirm proper operation of the computer's serial port.

Uploaded by

Relu Garban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CableEye Wiring Report MATCH DATA 7-6-03 12:18 PM

Name: 2 DB9F-DB9M-NS3X DB9 LOOPBACK CONNECTOR

Print your company information here. Set up in Preferences / Print Options.


Socket L Socket R
DB9 Female DB9 Male

1
6
2
7
3
8
4

NETLIST NOTES
L-1 L-4 L-6 DB9 LOOPBACK CONNECTOR
L-2 L-3 A loopback connector usually consists of a
L-7 L-8 connector without a cable and includes
internal wiring to reroute signals back to the
sender. This DB9 female connector would
attach to a DTE device such as a personal
computer. When the computer receives data, it
will not know whether the signals it receives
come from a remote DCE device set to echo
characters, or from a loopback connector. Use
loopback connectors to confirm proper
operation of the computer's serial port. Once
confirmed, insert the serial cable you plan to
use and attach the loopback to the end of the
serial cable to verify the cable.

In this case, Transmit Data joins to Received


Data, Request-to-Send joins to Clear-to-Send,
and DTE-Ready joins to DCE-Ready and
Received Line Signal Detect.

LABEL
DB9 LOOPBACK

CableEyeTM by CAMI Research Inc. Conductivity Threshold: 2 Ω Isolation Threshold: 5 MΩ

You might also like