Scribd
Upload
403 views2 pages

DDR - 3 Specifications

The DDR-3 Resistivity Meter is designed for resistivity surveys up to 150m depth using rechargeable batteries. It sends stabilized currents up to 200mA and measures potential with 100 micro volt resolution or resistance with 50 micro ohm resolution. Housed in a sturdy briefcase, it provides reliable outputs for groundwater exploration, dam investigations, and other geological studies.

Uploaded by

Ramakrishna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
403 views2 pages

DDR - 3 Specifications

The DDR-3 Resistivity Meter is designed for resistivity surveys up to 150m depth using rechargeable batteries. It sends stabilized currents up to 200mA and measures potential with 100 micro volt resolution or resistance with 50 micro ohm resolution. Housed in a sturdy briefcase, it provides reliable outputs for groundwater exploration, dam investigations, and other geological studies.

Uploaded by

Ramakrishna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

RESISTIVITY METER MODEL DDR-3

The DDR-3 Resistivity Meter is a specialized version of IGIS resistivity meters


designed for use in resistivity surveys upto about 150m depth under geophysical
favourable field conditions. It utilizes rechargeable batteries as power source to
energize the ground thus eliminating the necessity of using the relatively
expensive dry cells. The equipment consists of two separate comportments-one
for reading the current (G.Unit) and the other for directly reading the
resistance/the potential (P-Unit), both housed in a single box.

The equipment, powered by a 24V rechargeable battery can send highly stabilized
currents upto 200mA and read the resulting potential with a 100 micro volts
resolution or ground resistance directly with 50 micro ohms resolution.

Housed in sturdy Aluminum box fixed in a briefcase, the instrument provides


highly reliable digital outputs of ground resistance during field surveys and finds
extensive use in ground water exploration, dam site investigation, delineation of
geological structural features and in several other related problems.

Ground Water Exploration, investigation


of shallow as well as deeper aquifers.

Bed rock investigations for dam


construction tunnel alignment and
powerhouse construction etc,

APPLICATIONS: Mineral exploration

Study of geological structural features.

Sand and gravel deposit location.

Geophysical field training.


FEATURES: With special circuit elements, the instrument can
energize the ground with a maximum power
output of 80 Watts.

* Highly stabilized current output With special circuit design the instrument can
send highly stabilized currents.

* Current output indicator 3½ digit LCD display helps monitor the stability
of the output current.

* Potential Measurements 3½ digit LCD display Can measure potential with


high accuracy of 100 Micro volts.

Cancellation of S.P. is simple and fast.

*Highly portable and Rugged Rugged and compact housing provides the
required portability during the operations.

SPECIFICATIONS:

G UNIT: Input Power source 24V D.C. Rechargeable Batteries.

Power Output range Upto 200 Watts maximum


Stabilized Currents
200mA, 100mA, 50mA, 10mA and
Upto 2A in non-stabilized mode.
Voltage setting 25,50,100,200,300,400V
Input impedance 1 mega ohm

P. UNIT : 0-1999 mV in two steps with resolution of 1mV,


Potential measuring 0.1mV

Self Potential cancellation Upto ± 450 mV

Resistance Range 0.0005 to 400 ohms in constant current mode;


0.0005 to 10 K ohms in non-stabilized mode.

Instrument power supply Three 9V disposable Batteries.

 Specifications are likely to change with R & D


 IGIS also custom build resistivity meters to individual specifications and undertake repairs.
 IGIS instruments carry one-year guarantee against manufacturing defects.

Specifications are likely to change with R&D.


IGIS also makes custom-build resistivity meters to individual specifications and under take repairs
IGIS Instruments carry one-year guarantee against manufacturing defects.
__________________________________________________________________
INTEGRATED GEO INSTRUMENTS
& SERVICES PVT.LTD
12-13-382, Street No.18, Tarnaka, Hyderabad-500 017.
Ph.No.27018456, 42218456
Website: www.igisindia.com Email: [email protected]

You might also like