Scribd
Upload
42 views

4 Nand-Function: Status Leds

The document discusses a NAND logic function using a LOGO!Learn training device. It provides function block diagrams and ladder diagrams of the NAND logic circuit and has students build and test the circuit to verify the output states.

Uploaded by

Industrial It
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
42 views

4 Nand-Function: Status Leds

The document discusses a NAND logic function using a LOGO!Learn training device. It provides function block diagrams and ladder diagrams of the NAND logic circuit and has students build and test the circuit to verify the output states.

Uploaded by

Industrial It
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

1 Solution sheet: NAND-function with LOGO!

Learn

v
4 NAND-function
The learning card shows the NAND-function as a function block diagram (FBD) and as a
circuit diagram.
If an AND-function and a NOT-function are interconnected, all output states at the
output Q are reversed (negated). At output Q of a NAND-function state H exists if state H
is not present on any of the inputs.

Status LEDs

Circuit diagram
Function block diagram

Switch

Button

Figure 1: Learning card 4 - NAND-function

Correlation list 1
Symbol absolute Comment
S1 I1 Switch
S2 I3 Switch
P1 Q1 Status LED

Correlation list 2
Symbol absolute Comment
S3 I7 Switch
S4 I8 Switch
P2 Q4 Status LED
Author: Jürgen Kaftan © 2010
2 Solution sheet: NAND-function with LOGO!Learn

v
Exercise with correlation list 1

❏ Enter the program according to function block diagram (FBD) into the programming
unit (PC) and transfer into the LOGO!.

❏ Test the circuit with the training device LOGO!Learn according to function table.

❏ Read-off the signal states at the Status LEDs of the training device LOGO!Learn and
enter them into the right column of the function table:

Function table
I1 I3 Q1
H H L
H L H
L H H
L L H

❏ Draw the function block diagram together with the respective parameters into the
solution field 1.
Solution field 1

Figure 2: Logic circuit for NAND-function (Function block diagram)

Author: Jürgen Kaftan © 2010


3 Solution sheet: NAND-function with LOGO!Learn

v
Exercise with correlation list 2

❏ Enter the program according to ladder diagram (LAD) into the programming unit
(PC) and transfer into the LOGO!.

❏ Test the circuit with the training device LOGO!Learn according to function table.

❏ Read-off the signal states at the Status LEDs of the training device LOGO!Learn and
enter them into the right column of the function table:

Function table
I7 I8 Q4
H H L
H L H
L H H
L L H

❏ Draw the ladder diagram together with the respective parameters into the solution
field 2.
Solution field 2

Figure 3: Logic circuit for NAND-function (Ladder diagram)

Author: Jürgen Kaftan © 2010

You might also like