Manual Linx CJ 400
Manual Linx CJ 400
The information in this Parts List is to provide a distributor of Linx products with
sufficient information to identify and order spare parts for the Linx CJ400 range of 1. Where prices are shown:
Continuous Ink Jet Printers.
●● ‘Price D’ is the price charged by Linx to a Distributor. Any general or specific discounts
Products and component parts described in this document are subject to continuous
to this price are not shown.
development, and reviews will be made periodically in further issues and amendments.
●● Where shown, ‘Price L’ is the recommended List Price (advisory end user price).
To assist in identifying the relevant part number, numbered illustrations are provided where
possible. ●● Packaging of spare parts is included in the price.
For further information or help with Linx spare parts please contact:
2. All Distributor prices quoted are ex-works Linx factory, St Ives, UK.
Linx Printing Technologies Ltd
Burrel Road
St Ives 3. Availability, as quoted in the price list, is defined here:
Cambridgeshire
Ex-stock: Items will be available for despatch within 3 working days of receipt of
PE27 3LA
order.
UK
X Weeks: Items will be available for despatch within X weeks of receipt of order.
Tel: ++ 44 (0) 1480 302100
Fax: ++ 44 (0) 1480 302116 Enquire: Please contact Linx Sales office for advice on availability terms.
www.linxglobal.com Last Stock: Stocks of these spare parts are limited; supply is subject to
availability.
Linx will be pleased to receive any correspondence relating to this Parts List and the parts
described herein.
Orders for large quantities of single items may be subject to scheduled deliveries. If this
Disclaimer and Copyright happens, the first part delivery of any order will be despatched according to the terms defined
Information of a technical nature and particulars of the spare parts and their use are given by above.
Linx in good faith.
At all times, Linx Continuous Ink Jet Printers must be operated with Linx-approved spares.
Linx cannot accept liability for any loss or damage caused by the fitting or use of unauthorized
spare parts.
The Parts List is intended to assist the distributor to maintain Linx products, and every care
has been taken to be precise and accurate. However, Linx shall not be liable for any loss or
damage arising from the use of any information herein, errors or omissions, or any incorrect
use of the spare parts and products whatsoever.
Neither whole nor part of the information contained in this manual, nor the products described,
may be adapted or reproduced in any material form without prior written consent of Linx
Printing Technologies Ltd.
This Edition published 07 August 2013
© 2013 Linx Printing Technologies Ltd
LINX is a registered trademark of Linx Printing Technologies Ltd.
Unauthorized use of the LINX trademark is strictly forbidden.
T551
M121
T583
M163
10 8
12
13
1
3 7
4 5 6
Section 1 - Parts - Front Left View - Covers Removed
13
M121
T583
M163
11
9
14
10
10
1
7
9
3 8
5
7
9
8
Section 1 - Parts - IPM power, Pump & IPM to PCB interface cables
Section 1 - Parts - Solvent Priming Unit & Printhead to Ink Interface Cables
4
3
2
8
10
9
2
4
7
ries
1
2
10
4 7
5
6
Easypacks
Contain five individual boxes, each containing two 0.5-litre bottles of the same
ink type, packaged in one outer carton. Easypacks are not available for
solvents.
Production packs
Contain two 0.5-litre bottles of ink with eight 0.5-litre bottles of suitable
solvent.
Solvent Pack
Contain 5 litres of one solvent type, in ten 0.5-litre bottles.
Combipacks
Contain 2 litres of ink and 3 litres of the recommended solvent, in ten 0.5-litre
bottles.