BPG Range
BPG Range
42
The BPG range comprises 16 sizes of enclosure
manufactured in glass reinforced polyester
(GRP). This material is highly resistant to
Glass Reinforced Polyester Enclosures
ABTECH mould the BPG range from SMC material The BPG range is also available carbon loaded
rather than DMC which is the most common form (BPGC) which helps to reduce the surface
of GRP. In this method the glass reinforcement resistance of the material and consequently
takes the form of sheets rather than short strands. reduce the risk of spark from static build up.
This gives much greater mechanical strength and
also in the event of the enclosure being exposed Earthing can be accomplished by various
to fire conditions the structure holds together means. Internal / external earth stud which in
even if the resin is depleted due to the elevated turn can be connected to the terminal mounting
temperatures. This is demonstrated by the fact rail or component mounting plate, an earth
that the BPG range when fitted with ceramic continuity plate (ECP) can be fitted around the
terminals meets the requirements of IEC 331 inner walls to provide continuity for cable glands
(750°C (1382°F) for 3 hours) and also BS6387/1983 and various rail mounted earth terminals or
(950°C (1742°F) for 3 hours - flame only). Further proprietary earth bars can be fitted inside the
information about this testing procedure can be enclosure.
found in Section 6 of this catalogue.
43
The BPG range is suitable for a wide range of
ambient conditions. Hazardous Area certified BPG Range Features
enclosures are suitable for -65°C to + 130°C. Non-
The BPG and BPGC enclosures are suitable for • Fire Resistant to IEC331
use in hazardous areas and can be supplied with
a number of certificates, specifically ATEX EEx'e' • Impact Resistant > 7Nm
to BS EN 50019 (zone 1 & 2) EEx'nA' to BS EN50021
(zone 2) and NEMA 4X (CSA, UL & FM class 1, div • UV Resistant
2).
• Can be drilled and tapped to
accommodate most thread forms
(NPT for example)
Ex e ∙ ∙ ∙ ∙
Ex ai ∙ ∙ ∙ ∙ ∙ ∙
The BPG range can be supplied fitted with any Ex ab ∙ ∙ ∙ ∙
component approved terminal to apparatus
level or can be supplied empty as component
Ex nA ∙ ∙
approved for the clients own certification Ex nR ∙ ∙
requirements.
Available with Apparatus or Component certification
44
Accessories and Options
The following table is a list of the available accessories suitable for particular standard sizes of BPG
Glass Reinforced Polyester Enclosures
enclosures. Care should be taken when ordering accessories for use with enclosures intended for
hazardous areas to ensure that compliance with certification is retained.
EH - External Hinges
MR - DIN Standard
RF - RFI Protection
MP - Component
EX - Ex Certified
Mounting Plate
ES - Earth Stud
Mounting Rail
Part Number
Height (mm)
Depth (mm)
(see note 1)
(see note 2)
(see note 4)
Width (mm)
Screws
Plate
Feet
BPG1 80 75 55
● ● ● ● ● ● ● ● ●
BPG2 110 75 55
● ● ● ● ● ● ● ● ●
BPG3 160 75 55
● ● ● ● ● ● ● ● ●
BPG4 190 75 55
● ● ● ● ● ● ● ● ●
BPG4.5 190 75 75
● ● ● ● ● ● ● ● ●
BPG5 230 75 55
● ● ● ● ● ● ● ● ●
BPG6 122 120 90
● ● ● ● ● ● ● ● ● ● ● ●
BPG7 220 120 90
● ● ● ● ● ● ● ● ● ● ● ●
BPG8 160 160 90
● ● ● ● ● ● ● ● ● ● ● ●
BPG9 260 160 90
● ● ● ● ● ● ● ● ● ● ● ●
BPG10 360 160 90
● ● ● ● ● ● ● ● ● ● ● ●
BPG11 560 160 90
● ● ● ● ● ● ● ● ● ● ● ●
BPG12 255 250 120
● ● ● ● ● ● ● ● ● ● ● ●
BPG13 400 250 120
● ● ● ● ● ● ● ● ● ● ● ●
BPG13.5 400 250 160
● ● ● ● ● ● ● ● ● ● ● ●
BPG14 600 250 120
● ● ● ● ● ● ● ● ● ● ● ●
BPG15 400 405 120
● ● ● ● ● ● ● ● ● ● ● ●
Ordering Example;
BPG8 EX EC EB MR
(BPG8 EX Certified with Earth Continuity Plate, Internal Earthing Bar and DIN standard Mounting Rail)
1. Carbon loading gives a surface tracking value of between 10MΩ and 10GΩ. Surface colour is black.
2. EEx'e' certification may be component or apparatus certified - please specify your requirements.
3. Radio Frequency Interference (RF) gasket may reduce IP rating. Enclosure may also be internally coated with RFI material.
45
Glass Reinforced Polyester Enclosures
Copper earth continuity plate Earth Stud Allen Head fixing screws
(must also be fitted with earth stud) (either brass or stainless steel) (grade 316)
External mounting feet Internal Earthing bar DIN standard mounting rail
(stainless steel 316) (can be fitted with clamps) (TS15, TS32 or TS35)
46
BPG1 / BPGc1 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
8.390W
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG1 GRP 80 75 55 230
BPGC1 Carbon Loaded GRP 80 75 55 230
47
BPG1 / BPGc1
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
48
BPG2 / BPGc2 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
8.551W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 80 26
Weidmuller Entrelec Wago Height 36 30
BK4 (4 way) 2 MA2.5/5 0 280-992 0
BK6 (6 way) 1 M4/6 0 280-999 0
BK12 (12 way) 1 M6/8 0 281-691 0
MK 6/3 1 M10/10 0 281-992 0
MK 6/4 1 M16/12 0 281-993 0
MK 6/6 1 M35/16 0 282-691 0
SAK 2.5 0 284-691 0
SAK 4 0 283-691 0 Gland Entry Matrix *
SAK 6N 0 285-691 0
SAK 10 0 280-998 0 Size Side A - C Side B - D
SAK 16 0 281-998 0 M16 2 0
SAK 35 0 264-120 12 M20 0 0
264-220 7 M25 0 0
264-132(2) 2 M32 0 0
264-134(4) 1 M40 0 0
262-132(2) 2
* Using standard gland clearances
264-134(4) 1
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG2 GRP 110 75 55 230
BPGC2 Carbon Loaded GRP 110 75 55 230
49
BPG2 / BPGc2
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
50
BPG3 / BPGc3 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
8.833W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 130 27
Weidmuller Entrelec Wago Height 36 29
BK4 (4 way) 3 MA2.5/5 0 280-992 0
BK6 (6 way) 2 M4/6 0 280-999 0
BK12 (12 way) 1 M6/8 0 281-691 0
MK 6/3 2 M10/10 0 281-992 0
MK 6/4 2 M16/12 0 281-993 0
MK 6/6 1 M35/16 0 282-691 0
SAK 2.5 0 284-691 0
SAK 4 0 283-691 0 Gland Entry Matrix *
SAK 6N 0 285-691 0
SAK 10 0 280-998 0 Size Side A - C Side B - D
SAK 16 0 281-998 0 M16 4 0
SAK 35 0 264-120 19 M20 0 0
264-220 11 M25 0 0
264-132(2) 4 M32 0 0
264-134(4) 3 M40 0 0
262-132(2) 4
* Using standard gland clearances
264-134(4) 3
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG3 GRP 160 75 55 405
BPGC3 Carbon Loaded GRP 160 75 55 405
51
BPG3 / BPGc3
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
52
BPG4 / BPGc4 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
9.012W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 160 27
Weidmuller Entrelec Wago Height 36 30
BK4 (4 way) 4 MA2.5/5 0 280-992 0
BK6 (6 way) 2 M4/6 0 280-999 0
BK12 (12 way) 1 M6/8 0 281-691 0
MK 6/3 3 M10/10 0 281-992 0
MK 6/4 3 M16/12 0 281-993 0
MK 6/6 2 M35/16 0 282-691 0
SAK 2.5 0 284-691 0
SAK 4 0 283-691 0 Gland Entry Matrix *
SAK 6N 0 285-691 0
SAK 10 0 280-998 0 Size Side A - C Side B - D
SAK 16 0 281-998 0 M16 5 0
SAK 35 0 264-120 25 M20 0 0
264-220 15 M25 0 0
264-132(2) 5 M32 0 0
264-134(4) 3 M40 0 0
262-132(2) 5
* Using standard gland clearances
264-134(4) 3
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG4 GRP 190 75 55 450
BPGC4 Carbon Loaded GRP 190 75 55 450
53
BPG4 / BPGc4
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
54
BPG4.5/BPGc4.5 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
9.260W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 55 52
Weidmuller Entrelec Wago Height 160 19
BK4 (4 way) 4 MA2.5/5 0 280-992 0
BK6 (6 way) 3 M4/6 0 280-999 0
BK12 (12 way) 1 M6/8 0 281-691 0
MK 6/3 3 M10/10 0 281-992 0
MK 6/4 3 M16/12 0 281-993 0
MK 6/6 2 M35/16 0 282-691 0
SAK 2.5 0 284-691 0
SAK 4 0 283-691 0 Gland Entry Matrix *
SAK 6N 0 285-691 0
SAK 10 0 280-998 28 Size Side A - C Side B - D
SAK 16 0 281-998 24 M16 6 0
SAK 35 0 264-120 25 M20 4 0
264-220 15 M25 3 0
264-132(2) 6 M32 0 0
264-134(4) 4 M40 0 0
262-132(2) 6
* Using standard gland clearances
264-134(4) 4
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG4.5 GRP 190 75 75 529
BPGC4.5 Carbon Loaded GRP 190 75 75 529
55
BPG4.5/BPGc4.5
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
56
BPG5 / BPGc5 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
9.260W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 90 23
Weidmuller Entrelec Wago Height 30 28
BK4 (4 way) 0 MA2.5/5 0 280-992 0
BK6 (6 way) 4 M4/6 0 280-999 0
BK12 (12 way) 2 M6/8 0 281-691 0
MK 6/3 4 M10/10 0 281-992 0
MK 6/4 4 M16/12 0 281-993 0
MK 6/6 2 M35/16 0 282-691 0
SAK 2.5 0 284-691 0
SAK 4 0 283-691 0 Gland Entry Matrix *
SAK 6N 0 285-691 0
SAK 10 0 280-998 0 Size Side A - C Side B - D
SAK 16 0 281-998 0 M16 0 0
SAK 35 0 264-120 32 M20 0 0
264-220 19 M25 0 0
264-132(2) 6 M32 0 0
264-134(4) 4 M40 0 0
262-132(2) 6
* Using standard gland clearances
264-134(4) 4
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG5 GRP 230 75 55 529
BPGC5 Carbon Loaded GRP 230 75 55 529
57
BPG5 / BPGc5
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
58
BPG6 / BPGc6 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
9.378W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 75 54
Weidmuller Entrelec Wago Height 60 53
BK4 (4 way) 2 MA2.5/5 17 280-992 15
BK6 (6 way) 2 M4/6 14 280-999 15
BK12 (12 way) 1 M6/8 8 281-691 13
MK 6/3 1 M10/10 8 281-992 13
MK 6/4 1 M16/12 7 281-993 13
MK 6/6 1 M35/16 5 282-691 10
SAK 2.5 14 284-691 8
SAK 4 13 283-691 6 Gland Entry Matrix *
SAK 6N 10 285-691 0
SAK 10 8 280-998 15 Size Side A - C Side B - D
SAK 16 7 281-998 13 M16 2 1
SAK 35 5 264-120 13 M20 1 1
264-220 8 M25 1 1
264-132(2) 3 M32 1 0
264-134(4) 2 M40 0 0
262-132(2) 3
* Using standard gland clearances
264-134(4) 2
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG6 GRP 122 120 90 750
BPGC6 Carbon Loaded GRP 122 120 90 750
59
BPG6 / BPGc6
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
60
BPG7 / BPGc7 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
10.500W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 180 56
Weidmuller Entrelec Wago Height 60 53
BK4 (4 way) 5 MA2.5/5 36 280-992 34
BK6 (6 way) 3 M4/6 30 280-999 34
BK12 (12 way) 2 M6/8 22 281-691 29
MK 6/3 4 M10/10 18 281-992 29
MK 6/4 4 M16/12 15 281-993 29
MK 6/6 2 M35/16 11 282-691 22
SAK 2.5 30 284-691 18
SAK 4 28 283-691 15 Gland Entry Matrix *
SAK 6N 22 285-691 0
SAK 10 18 280-998 34 Size Side A - C Side B - D
SAK 16 15 281-998 29 M16 10 1
SAK 35 11 264-120 30 M20 4 1
264-220 18 M25 3 1
264-132(2) 6 M32 3 0
264-134(4) 4 M40 0 0
262-132(2) 6
* Using standard gland clearances
264-134(4) 4
* Check that this enclosure can accommodate the cable bending radius
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG7 GRP 220 120 90 1060
BPGC7 Carbon Loaded GRP 220 120 90 1060
61
BPG7 / BPGc7
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
62
BPG8 / BPGc8 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
10.348W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 108 78
Weidmuller Entrelec Wago Height 65 58
BK4 (4 way) 3 MA2.5/5 24 280-992 22
BK6 (6 way) 2 M4/6 20 280-999 22
BK12 (12 way) 1 M6/8 15 281-691 19
MK 6/3 2 M10/10 12 281-992 19
MK 6/4 2 M16/12 10 281-993 19
MK 6/6 1 M35/16 7 282-691 15
SAK 2.5 20 284-691 12
SAK 4 19 283-691 10 Gland Entry Matrix *
SAK 6N 15 285-691 0
SAK 10 12 280-998 22 Size Side A - C Side B - D
SAK 16 10 281-998 19 M16 6 2
SAK 35 7 264-120 20 M20 2 2
264-220 12 M25 2 1
264-132(2) 4 M32 1 1
264-134(4) 3 M40 0 0
262-132(2) 4
* Using standard gland clearances
264-134(4) 2
* Check that this enclosure can accommodate the cable bending radius
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG8 GRP 160 160 90 1060
BPGC8 Carbon Loaded GRP 160 160 90 1060
63
BPG8 / BPGc8
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
64
BPG9 / BPGc9 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
11.933W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 210 80
Weidmuller Entrelec Wago Height 65 60
BK4 (4 way) 6 MA2.5/5 43 280-992 40
BK6 (6 way) 4 M4/6 36 280-999 40
BK12 (12 way) 2 M6/8 27 281-691 34
MK 6/3 4 M10/10 22 281-992 34
MK 6/4 4 M16/12 18 281-993 34
MK 6/6 3 M35/16 14 282-691 27
SAK 2.5 36 284-691 21
SAK 4 34 283-691 18 Gland Entry Matrix *
SAK 6N 27 285-691 0
SAK 10 22 280-998 40 Size Side A - C Side B - D
SAK 16 18 281-998 34 M16 12 4
SAK 35 14 264-120 36 M20 6 2
264-220 21 M25 4 1
264-132(2) 7 M32 3 1
264-134(4) 5 M40 0 0
262-132(2) 7
* Using standard gland clearances
264-134(4) 5
* Check that this enclosure can accommodate the cable bending radius
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG9 GRP 260 160 90 1170
BPGC9 Carbon Loaded GRP 260 160 90 1170
65
BPG9 / BPGc9
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
66
BPG10 / BPGc10 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
13.793W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 312 82
Weidmuller Entrelec Wago Height 65 60
BK4 (4 way) 9 MA2.5/5 63 280-992 58
BK6 (6 way) 6 M4/6 52 280-999 58
BK12 (12 way) 3 M6/8 40 281-691 50
MK 6/3 6 M10/10 32 281-992 50
MK 6/4 6 M16/12 26 281-993 50
MK 6/6 4 M35/16 20 282-691 39
SAK 2.5 52 284-691 31
SAK 4 48 283-691 26 Gland Entry Matrix *
SAK 6N 40 285-691 0
SAK 10 32 280-998 58 Size Side A - C Side B - D
SAK 16 26 281-998 50 M16 18 4
SAK 35 20 264-120 52 M20 8 2
264-220 31 M25 6 1
264-132(2) 11 M32 5 1
264-134(4) 7 M40 0 0
262-132(2) 10
* Using standard gland clearances
264-134(4) 7
* Check that this enclosure can accommodate the cable bending radius
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG10 GRP 360 160 90 2150
BPGC10 Carbon Loaded GRP 360 160 90 2150
67
BPG10 / BPGc10
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
68
BPG11 / BPGc11 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
18.338W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 242 80
Weidmuller Entrelec Wago Height 65 (x2) 60
BK4 (4 way) 14 MA2.5/5 101 280-992 96
BK6 (6 way) 10 M4/6 85 280-999 96
BK12 (12 way) 5 M6/8 64 281-691 82
MK 6/3 11 M10/10 51 281-992 82
MK 6/4 11 M16/12 43 281-993 82
MK 6/6 7 M35/16 32 282-691 63
SAK 2.5 85 284-691 51
SAK 4 78 283-691 42 Gland Entry Matrix *
SAK 6N 64 285-691 0
SAK 10 51 280-998 96 Size Side A - C Side B - D
SAK 16 43 281-998 82 M16 28 4
SAK 35 32 264-120 85 M20 12 2
264-220 51 M25 10 1
264-132(2) 18 M32 8 1
264-134(4) 12 M40 0 0
262-132(2) 17
* Using standard gland clearances
264-134(4) 12
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG11 GRP 560 160 90 3200
BPGC11 Carbon Loaded GRP 560 160 90 3200
69
BPG11 / BPGc11
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
70
BPG12 / BPGc12 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
15.474W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 205 170
Weidmuller Entrelec Wago Height 90 85
BK4 (4 way) 12 MA2.5/5 84 280-992 78
BK6 (6 way) 8 M4/6 70 280-999 78
BK12 (12 way) 4 M6/8 54 281-691 66
MK 6/3 8 M10/10 42 281-992 66
MK 6/4 8 M16/12 36 281-993 66
MK 6/6 6 M35/16 26 282-691 52
SAK 2.5 70 284-691 42
SAK 4 66 283-691 17 Gland Entry Matrix *
SAK 6N 54 285-691 12
SAK 10 42 280-998 78 Size Side A - C Side B - D
SAK 16 36 281-998 66 M16 15 12
SAK 35 20 264-120 70 M20 10 8
264-220 42 M25 6 4
264-132(2) 14 M32 3 2
264-134(4) 10 M40 3 2
262-132(2) 14
* Using standard gland clearances
264-134(4) 8
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG12 GRP 255 250 120 3200
BPGC12 Carbon Loaded GRP 255 250 120 3200
71
BPG12 / BPGc12
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
72
BPG13 / BPGc13 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
20.867W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 350 170
Weidmuller Entrelec Wago Height 89 84
BK4 (4 way) 20 MA2.5/5 140 280-992 132
BK6 (6 way) 14 M4/6 118 280-999 132
BK12 (12 way) 6 M6/8 88 281-691 114
MK 6/3 14 M10/10 72 281-992 114
MK 6/4 14 M16/12 60 281-993 114
MK 6/6 10 M35/16 44 282-691 88
SAK 2.5 118 284-691 70
SAK 4 108 283-691 29 Gland Entry Matrix *
SAK 6N 88 285-691 20
SAK 10 72 280-998 132 Size Side A - C Side B - D
SAK 16 60 281-998 114 M16 30 12
SAK 35 36 264-120 118 M20 16 8
264-220 70 M25 14 4
264-132(2) 24 M32 6 2
264-134(4) 16 M40 5 2
262-132(2) 24
* Using standard gland clearances
264-134(4) 16
* Check that this enclosure can accommodate the cable bending radius
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG13 GRP 400 250 120 3650
BPGC13 Carbon Loaded GRP 400 250 120 3650
73
BPG13 / BPGc13
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
74
BPG13.5 / BPGc13.5 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
20.867W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 350 170
Weidmuller Entrelec Wago Height 89 84
BK4 (4 way) 20 MA2.5/5 140 280-992 132
BK6 (6 way) 14 M4/6 118 280-999 132
BK12 (12 way) 6 M6/8 88 281-691 114
MK 6/3 14 M10/10 72 281-992 114
MK 6/4 14 M16/12 60 281-993 114
MK 6/6 10 M35/16 44 282-691 88
SAK 2.5 118 284-691 70
SAK 4 108 283-691 29 Gland Entry Matrix *
SAK 6N 88 285-691 20
SAK 10 72 280-998 132 Size Side A - C Side B - D
SAK 16 60 281-998 114 M16 30 12
SAK 35 36 264-120 118 M20 16 8
264-220 70 M25 14 4
264-132(2) 24 M32 6 2
264-134(4) 16 M40 5 2
262-132(2) 24
* Using standard gland clearances
264-134(4) 16
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG13.5 GRP 400 250 160 4872
BPGC13.5 Carbon Loaded GRP 400 250 160 4872
75
BPG13.5 / BPGc13.5
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
76
BPG14 / BPGc14 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester
(Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
30.384W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 260 168
Weidmuller Entrelec Wago Height 90 (x2) 85
BK4 (4 way) 30 MA2.5/5 218 280-992 132
BK6 (6 way) 22 M4/6 182 280-999 132
BK12 (12 way) 12 M6/8 138 281-691 114
MK 6/3 22 M10/10 110 281-992 114
MK 6/4 22 M16/12 92 281-993 114
MK 6/6 14 M35/16 70 282-691 88
SAK 2.5 182 284-691 70
SAK 4 168 283-691 29 Gland Entry Matrix *
SAK 6N 138 285-691 20
SAK 10 110 280-998 132 Size Side A - C Side B - D
SAK 16 92 281-998 114 M16 42 12
SAK 35 70 264-120 118 M20 24 8
264-220 70 M25 20 4
264-132(2) 24 M32 8 2
264-134(4) 16 M40 6 2
262-132(2) 24
* Using standard gland clearances
264-134(4) 16
* Check that this enclosure can accommodate the cable bending radius
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG14 GRP 600 250 120 5235
BPGC14 Carbon Loaded GRP 600 250 120 5235
77
BPG14 / BPGc14
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
78
BPG15 / BPGc15 Glass Reinforced Polyester Enclosures IP66/7
Application
Hazardous and Industrial areas
Glass Reinforced Polyester Enclosures
Protection Degree
IP66 or 67
Certification
ATEX & IECEx (Zone 1 & 2; Zone 21 & 22)
TR CU
NEMA 4X (CSA, UL & FM) Class 1 Division 2
Material
Glass Reinforced Polyester (RAL7001 grey) or
Carbon Loaded Glass Reinforced Polyester (Black)
Temperature Rating
Hazardous Area: -65°C to +130°C
Non Hazardous: -70°C to +130°C
Power Rating
31.350W
Calculations do not include the use of end stops, end plates and separators. Check
that the enclosure can accommodate the cable bending radius and that the earth Side A - C Side B - D
stud and entry location will permit the required number of terminals to be fitted
Width 352 327
Weidmuller Entrelec Wago Height 89 84
BK4 (4 way) 30 MA2.5/5 210 280-992 198
BK6 (6 way) 21 M4/6 177 280-999 198
BK12 (12 way) 9 M6/8 132 281-691 171
MK 6/3 21 M10/10 108 281-992 171
MK 6/4 21 M16/12 90 281-993 171
MK 6/6 15 M35/16 66 282-691 132
SAK 2.5 177 284-691 105
SAK 4 162 283-691 58 Gland Entry Matrix *
SAK 6N 132 285-691 40
SAK 10 108 280-998 198 Size Side A - C Side B - D
SAK 16 90 281-998 171 M16 30 24
SAK 35 66 264-120 177 M20 18 16
264-220 101 M25 14 10
264-132(2) 36 M32 6 5
264-134(4) 24 M40 5 4
262-132(2) 36
* Using standard gland clearances
264-134(4) 24
Specifications
Part Number Material Width (mm) Length (mm) Depth (mm) Weight (g)
BPG15 GRP 400 405 120 5580
BPGC15 Carbon Loaded GRP 400 405 120 5580
79
BPG15 / BPGc15
Technical Drawing
All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)
80