Scribd
Upload
1K views

Technical - Data - Sheet - Catalyst - HR 538

HR 538 is a nickel-molybdenum catalyst manufactured by Axens for deep hydrorefining of petroleum cuts. It has very high activity for denitrification, aromatic hydrogenation, and desulfurization. This makes it well-suited for treating feedstocks from thermal and catalytic conversion processes as well as FCC feed pretreatment. HR 538 demonstrates Axens' advanced catalyst engineering capabilities. It can be used alone or with other NiMo or CoMo catalysts.

Uploaded by

mohsen ranjbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Technical - Data - Sheet - Catalyst - HR 538

HR 538 is a nickel-molybdenum catalyst manufactured by Axens for deep hydrorefining of petroleum cuts. It has very high activity for denitrification, aromatic hydrogenation, and desulfurization. This makes it well-suited for treating feedstocks from thermal and catalytic conversion processes as well as FCC feed pretreatment. HR 538 demonstrates Axens' advanced catalyst engineering capabilities. It can be used alone or with other NiMo or CoMo catalysts.

Uploaded by

mohsen ranjbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TECHNICAL DATA SHEET

Procatalyse Catalysts & Adsorbents

HR 538
Deep hydrorefining of petroleum cuts
HR 538 is the latest generation of NiMo type catalysts manufactured by Axens.
It presents very high denitrification and aromatic hydrogenation activities, as well as a
superior desulfurization activity.
These features are particularly interesting in the treatment of feedstocks originated
from thermal and catalytic conversion processes as well as for FCC feed pretreatment.
HR 538 is a very illustrative example of the Avanced Catalyst Engineering knowhow of
Axens.
It can be used in association with other NiMo type or CoMo type catalysts where
specific objectives are required.
HR 538 is delivered under oxide form. It can be sulfided in-situ by injection of a sulfur
compound.
HR 538 is available with a diameter of 1.2 mm or 1.6 mm or 2.5 mm.

TYPICAL PROPERTIES

‰ Nickel and molybdenum oxides on very high purity alumina

Trilobe extrudates

Nickel (NiO) 3.5 wt%


Molybdenum (MoO3) 17.0 wt%
Surface area 210 m2/g
Total pore volume 0.47 cm3/g
Diameter 1.2 1.6 2.5 mm
Sock loading density 0.67 0.70 0.70 kg/l
Dense loading density 0.77 0.79 0.79 kg/l
Bulk crushing strength 1.49 MPa

Shipping information

PACKAGING : 1500 l. big bags (Net 800 kg). MANUFACTURING : Salindres plant
30340 SALINDRES (France)

HR 538/04.1
Axens se réserve le droit de modifier à sa seule discrétion et sans préavis tout ou partie des Axens reserves the right to change at its sole discretion, and without prior notice, all or part of
informations contenues dans cette fiche technique. the information contained in this Technical Data Sheet.
Les informations contenues dans la présente fiche technique n'ont qu'une valeur indicative et Technical information regarding the compositions, properties, or use of the product described
ne sauraient en aucun cas constituer un quelconque engagement contractuel de la part de in this Technical Data Sheet is believed to be reliable. However, no representation or warranty
Axens. is made with respect thereto except as made by Axens in writing at the time of sale.
89, Boulevard Franklin Roosevelt - B.P.50802 - F 92508 Rueil Malmaison - France
Tél. +33 (0)1 47 14 21 00 - Télécopieur +33 (0)1 47 51 87 95 - Télex 631091 F

You might also like