Scribd
Upload
76 views2 pages

Seplite MC295

Resina cationica

Uploaded by

Yesid Tapiero Martínez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views2 pages

Seplite MC295

Resina cationica

Uploaded by

Yesid Tapiero Martínez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

We Do Nothing Except Professional Separation

SEPLITE® MC295
SEPLITE® Water Treatment Resin
Macroporous Weak Acid Cation

Descriptions

SEPLITE® MC295 is a high purity macroporous weak acid cation resin with carboxylic functional group

The resin is bead-shaped and has a special bead size distribution for removal of bicarbonate alkalinity.
With its high working capacity, excellent mechanical and chemical stability and osmotic properties,
SEPLITE®MC295 resin is most commonly used in water purification, like decarbonisation and softening
of water.

Key Features and Benefits Applications

 High operating capacity  Water dealkalization and softening


 Good kinetic performance
 High temperature resistance

Physical and Chemical Characteristics

SEPLITE® MC 295
Matrix Structure Polystyrene Crosslinked with DVB

Ionic Form as shipped H+

Physical Appearance Light yellow spherical beads


Particle size mm 0.315-1.25
Moisture content % 45-60
Bulk Density g/l 720-800
Density g/l 1140-1200
Total capacity eq/L ≥4.0
Fine beads (%) % ≥95

ADD: 135 Jinye Road, Xi’an Hi-Tech Industrial Development Zone, Shaanxi 710076 China
TEL: +86 29 89182091 FAX: +86 29 88453538 www.sunresin.com
We Do Nothing Except Professional Separation

Recommended Operating Conditions

Maximum Operating Temperature 120℃

Service Flow Rate BV/h 5-50

Regenerants HCl
Concentration % 4--6
Regenerants Consumption BV 2
Flow Rate BV/h 2---7
Minimum Contact Time 30 Minutes
Slow Rinse 2 BV at regeneration flow rate
Fast Rinse 2 to 4 BV at service flow rate
PH Range 5-14

Precautions

 Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without
exposure to direct sunlight。
 Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
 In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
 Material and samples must be disposed according to local regulations.
 Dry polymers will expand when become wetted and may cause an exothermic reaction.
 Spilled materials may be slippery.

SUNRESIN and SEPLITE are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an

For more information about SEPLITE® resins, please contact SUNRESIN directly.

ADD: 135 Jinye Road, Xi’an Hi-Tech Industrial Development Zone, Shaanxi 710076 China
TEL: +86 29 89182091 FAX: +86 29 88453538 www.sunresin.com

You might also like