hw5 Macroa
hw5 Macroa
Macroeconomic Analysis
Econ 301-Spring 2019
Homework 5
Due: April 30th in class
(5*K^1/3)*(L^2/3).
a. Derive the equation describing labor demand in this economy as a function of the real
that factor prices adjust to equilibrate supply and demand, calculate the real wage, total output,
Total Output
Y = 5 * (27,000)^1/3 * (1,000)^2/3
= 5 * 30 * 100
Y = 15,000
Real Wage
10 * (K/L)^1/3 = 3W
10 * (27,000/1,000)^1/3 = 3W
10 * 3 = 3W
W=10
law setting a minimum wage that is 10 percent above the equilibrium wage you derived in part
(b). Assuming that Congress cannot dictate how many workers are hired at the mandated wage,
what are the effects of this law? Specifically, calculate what happens to the real wage,
Real Wage
10 * 1.1 = 11
Employment
3 * 10 * 1.1 = 10 * (K/L)^1/3
3.3 = (K/L)^1/3
(K/L) = 35.937
L = K / 35.937
= 27,000 / 35.937
= 751.31
Total Output
Y = 5 * (27,000)^1/3 * (751.31)^2/3
= 5 * 30 * 82.64
= 12,396.69
Total Amount Earned By Workers
W * L = 11 * 751.31
= 8,264.41
The raise in minimum wage causes employment to fall, total output to fall, and total
amount earned by workers to fall.
d. Does Congress succeed in its goal of helping the working class? Explain.
Although the lesser amount of people employed will be earning 10% more, the
working class overall will suffer because the total amount earned by all workers decreases
significantly.
e. Do you think that this analysis provides a good way of thinking about a minimum
Yes, I think this analysis provides a meaningful way to think about the minimum
wage law because even though a slight increase or decrease in the wage might not seem like
much, it can have drastic change on the total output and total amount earned by workers.
Country A and country B both have the production function Y = F(K, L) = K^1/3*L^2/3.
Yes, this production function does provide constant returns to scale because when
capital and labor are multiplied by lambda, the output is also multiplied by the same
lambda. Given the same proportion increases, the function provides constant returns to
scale.
Y = K^1/3*L^2/3
Y/L = (K^1/3*L^2/3)/L
Y/L = (K^1/3)/L^1-2/3
Y/L = (K^1/3)/L^1/3
Y=K^1/3
c. Assume that neither country experiences population growth or technological progress
and that 20 percent of capital depreciates each year. Assume further that country A saves 10
percent of output each year and country B saves 30 percent of output each year. Using your
answer from part (b) and the steady-state condition that investment equals depreciation, find the
steady-state level of capital per worker for each country. Then find the steady-state levels of
k*A = k*B = 1
sA = .1
sB = .3
o= .2
Steady state income per worker
y*= (k*)^1/3
Country A steady state income
y*A = (1)^1/3
=1
Country B steady state income
y*B = (1)^1/3
=1
Steady state consumption per worker
c*= (1-s)•y*
Country A steady state consumption
c*A= (1-0.1)*(1)
=0.9
Country B steady state consumption
c*B= (1-0.3)*(1)
=0.7
e. Remembering that the change in the capital stock is investment less depreciation, use a
calculator (or, better yet, a computer spreadsheet) to show how the capital stock per worker will
evolve over time in both countries. For each year, calculate income per worker and consumption
per worker. How many years will it be before the consumption in country B is higher than the
consumption in country A?
Country A
Y = K^.4*L^.6
Y/L = (K^.4*L^.6)/L
Y/L = (K^.4)/L^1-.6
Y/L = (K^.4)/L^.4
Y=K^.4
b. Assuming no population growth or technological progress, find the steady-state capital stock
per worker, output per worker, and consumption per worker as a function of the saving rate and
capital per worker, output per worker, and consumption per worker for saving rates of 0 percent,
10 percent, 20 percent, 30 percent, and so on. (You might find it easiest to use a computer
spreadsheet.) What saving rate maximizes output per worker? What saving rate maximizes
s k y c
0 0 0 0
0.1 0.509 0.763 0.687
0.2 1.615 1.211 0.969
0.3 3.175 1.587 1.111
0.4 5.128 1.923 1.154
0.5 7.438 2.231 1.116
0.6 10.080 2.520 1.008
0.7 13.033 2.793 0.838
0.8 16.281 3.053 0.611
0.9 19.813 3.302 0.330
1 23.616 3.542 0.000
The output per worker (y) is maximized when the savings rate is 100%. The consumption
d. Use information from Chapter 3 to find the marginal product of capital. Add to your table
from part (c) the marginal product of capital net of depreciation for each of the saving rates.
What does your table show about the relationship between the net marginal product of capital
s k y c MPK
0 0 0 0
0.1 0.509 0.763 0.687 0.450
0.2 1.615 1.211 0.969 0.150
0.3 3.175 1.587 1.111 0.050
0.4 5.128 1.923 1.154 0.000
0.5 7.438 2.231 1.116 -0.030
0.6 10.080 2.520 1.008 -0.050
0.7 13.033 2.793 0.838 -0.064
0.8 16.281 3.053 0.611 -0.075
0.9 19.813 3.302 0.330 -0.083
1 23.616 3.542 0.000 -0.090
When the savings rate is at 40%, the marginal product of capital is at 0 which means it is at
maximum efficiency. The consumption per worker is also maximized at the savings rate of
40%.
Draw a well-labeled graph that illustrates the steady state of the Solow model with population
growth. Use the graph to find what happens to steady-state capital per worker and income per
d. A one-time, permanent improvement in technology increases the amount of output that can be
Suppose an economy described by the Solow model has the following production function: Y =
K^½*(LE)^1/2.
o.
Δk= sy-(o+n+g)k
0= sk^½-(o+n+g)k
sk^½= (o+n+g)k
S/(o+n+g)=k/k^½
k^1//2= s/(o+n+g)
y= s/(o+n+g)
c. Two neighboring economies have the above production function, but they have different
parameter values. Atlantis has a saving rate of 28 percent and a population growth rate of 1
percent per year. Xanadu has a saving rate of 10 percent and a population growth rate of 4
percent per year. In both countries, g = 0.02 and o = 0.04. Find the steady-state value of y for
each country.