MODEL 192CDLR

MEDIUM DUTY ROLL-TO-ROLL CHAIN DRIVEN LIVE ROLLER

Conveyor shown with

optional supports

Roach model 192CDLR is a medium duty chain

driven live roller conveyor. This conveyor is designed to
CHAIN DRIVEN LIVE ROLLERS

transport loads such as tote pans, castings, drums or pallet loads.

HP @
“A” “B” MAX
45FPM
1/3 13-1/8” 49-1/2”
1/2 13-1/8” 49-1/2”
3/4 13-1/2” 49-1/2”
1 13-3/4” 50-1/16”
1-1/2 14-5/8” 50-3/8”
2 15-1/2” 52-1/16”

SPECIFICATIONS
TREAD ROLLERS: 1.9” dia. x 12 ga. ROLLER CENTERS: 4”, 6”, 8” or 12” MOTOR DRIVE: 1/3 HP, 230/460/3,
steel, model 192S with sprockets. centers available. 60 cycle, ODP right angle gear motor.
CHAIN DRIVE: Roll-to-roll no. 40 SPEED: 45 FPM, constant. ELECTRICAL CONTROLS: Optional.
roller chain. BEARINGS: Removable type, zinc-plated,
CENTER DRIVE: Reversible drive either grease packed, labyrinth sealed.
side mounted or underside mounted BED: 5-1/2” x 1-1/2” x 10 ga.
(specify). Main drive roller is supported and 3-1/2” x 1-1/2” x 10 ga. formed
by precision, heavy duty, lubricated, ball steel channel frame.
bearing units.
CHAIN GUARD: The chain drive is
completely enclosed along the entire
length of the conveyor.

68
SPECIFICATION TABLE
24 hour shipment
UNIT WEIGHTS (FOR 4” AND 8” ROLLER CENTERS ONLY)
CONVEYOR LENGTH 5’ 10’ 20’ 30’ 40’ 50’ 60’ 70’ 80’
CONV. SURFACE BF 4” RC 8” RC 4” RC 8” RC 4” RC 8” RC 4” RC 8” RC 4” RC 8” RC 4” RC 8” RC 8” RC 8” RC 8” RC
12” 15” 334 291 509 431 859 703 1209 948 1659 1247 1909 1519 1790 2065 2340
18” 21” 372 319 572 474 969 773 1367 1073 1764 1372 2161 1671 1971 2276 2581
24” 27” 409 351 634 516 1079 843 1524 1170 1969 1497 2414 1824 2251 2476 2801
30” 33” 452 379 697 559 1190 914 1683 1269 2175 1623 2668 1978 2333 2688 3043
36” 39” 469 406 739 600 1278 950 1817 1340 2356 1720 2895 2100 2480 2865 3250
42” 45” 524 430 819 640 1407 1049 1994 1457 2581 1865 3169 2274 2684 3099 3514
48” 51” 562 463 882 683 1517 1119 2152 1555 2788 1992 3423 2428 2864 3299 3734

UNIT WEIGHTS (FOR 6” AND 12” ROLLER CENTERS ONLY)

CONVEYOR LENGTH 5’ 10’ 20’ 30’ 40’ 50’ 60’ 70’ 80’

CHAIN DRIVEN LIVE ROLLERS

CONV. SURFACE BF 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12”
RC RC RC RC RC RC RC RC RC
12” 15” 307 285 457 405 755 651 1053 897 1351 1143 1647 1389 1946 1634 2246 1884 2546 2134
18” 21” 341 301 506 441 837 707 1169 974 1500 1240 1831 1506 2163 1773 2493 2043 2823 2313
24” 27” 370 331 555 476 921 763 1287 1050 1653 1337 2019 1624 2385 1911 2755 2201 3125 2491
30” 33” 405 358 605 513 1006 822 1407 1131 1807 1439 2208 1748 2609 2057 3009 2367 3409 2677
36” 39” 418 363 633 528 1066 856 1499 1184 1932 1512 2365 1840 2798 2168 3228 2498 3658 2828
42” 45” 465 406 700 581 1169 931 1637 1280 2105 1629 2574 1979 3044 2330 3514 2680 3984 3030
48” 51” 499 432 749 617 1251 987 1753 1357 2256 1728 2753 2090 3260 2468 3760 2838 4260 3208

OPTIONAL EQUIPMENT
SPEED: Constant speed 1.5-100 FPM; UNDERTRUSSED BED: Available to CEILING HANGERS: 5/8” dia. threaded
DC variable speed; AC inverter variable provide clearance underneath unit at rod with hardware to attach rods to
speed. Other constant or variable bed joint locations. Specify location for conveyor. Provides 6’ clearance
speeds available. NOTE: CAPACITY undertrussing and desired clearance between ceiling and TOR (furnished in
CHANGES WITH SPEED. 100 FPM MAX. underneath unit. Consult factory. place of floor supports). See Conveyor
WITH ROLL-TO-ROLL CHAIN DRIVE. GUARD RAILS: 1-3/4” x 1” formed Accessories.
MOTORS: Available through 3 HP in channel (model GC), adjusts horizontally ELECTRICAL CONTROLS: Magnetic
TEFC, explosion proof, dirty duty, brake to 8” wider than roller and vertically to starter; one direction manual starter;
motor, 115/230/1, 575/3, etc. 6” above roller; formed steel fixed (model momentary start/stop push button
FLOOR SUPPORTS: Supports, knee FSG in 2”, 4” and 6” heights; fixed station; limit switch, photo relay; others
braces, casters and polytier supports channel (model FC); 1-1/2” angle available.
available. See Conveyor Accessories. (model GA1-1/2). See Conveyor
Accessories.

ROLLER TO ROLLER CHAIN DRIVE OPTIONAL TOP ROLLER GUARD MOUNTED DRIVE
(guard removed for clarity)
®

69
 MODEL 192CDLRC
MEDIUM DUTY CHAIN DRIVEN LIVE ROLLER CURVE
SPECIFY MODEL NUMBER PER EXAMPLE
192CDLRC-27-45-L
192CDLRC-(between frames)-(degree)-(left or right)

Conveyor shown with

optional supports

Roach 192CDLRC is a medium duty chain driven live roller curve, designed to transport
medium duty loads such as castings or drums. NOTE: When conveying medium duty pallet
loads, use model 254TCDLRC, opposite page, to maintain product orientation.
CHAIN DRIVEN LIVE ROLLERS

UNIT 90° 45°

CONV. OUTSIDE QTY. QTY.
BF WT (lbs.) WT. (lbs.)
SURFACE RADIUS RLRS. RLRS.
15” 12” 4’-10-3/4” 18 339 9 265
21” 18” 4’-10-3/4” 18 374 9 277
27” 24” 4’-10-3/4” 18 409 9 292
33” 30” 8’-15/16” 30 543 15 313
39” 36” 8’-15/16” 30 586 15 337
45” 42” 8’-15/16” 30 633 15 364
51” 48” 8’-15/16” 30 681 15 391

OPTIONAL EQUIPMENT
SPEED: Constant speed 1.5-60
SPECIFICATIONS
FPM; DC variable speed; AC
TREAD ROLLERS: 1.9” dia. x 12 ga. steel, DRIVE LOCATION: Drive located on outside inverter variable speed. Other con-
model 192S with sprockets.* of curve. Specify right hand drive or left
stant or variable speeds available.
CHAIN DRIVE: Roller to roller with No. 40 hand drive (drive hand determined with
NOTE: CAPACITY CHANGES WITH
circular roller chain. reference point located at outside of curve).
SPEED. 100 FPM MAX. WITH
ROLLER CENTERS: 5” RC measured at ROLLER-TO-ROLLER CHAIN DRIVE.
END DRIVE: Reversible drive either side
outside radius of curve.
mounted or underside (specify). Main drive MOTORS: Available through 3 HP
roller is supported by precision, heavy duty, ELECTRICAL CONTROLS: Optional.
in TEFC, explosion proof, dirty duty,
lubricated, ball bearing units.
115/230/1, 575/3, etc.
CHAIN GUARD: Chain drive is enclosed, top HP @
“C” FLOOR SUPPORTS: Supports, knee
and bottom, along entire length of conveyor. 45FPM
braces, casters, ceiling hangers and
BED: 5-1/2” x 1-1/2” x 10 ga. and 1/3, 1/2 13-1/8”
polytier supports available. See
3-1/2” x 1-1/2” x 10 ga. formed steel 3/4 13-1/2” Conveyor Accessories.
channel frame. 1 13-3/4”
ELECTRICAL CONTROLS: Magnetic
BEARINGS: Removable type, heavy duty 1-1/2 14-5/8” or manual starter; limit switch;
bearings, zinc plated, grease packed, laby- 2 15-1/2”
rinth sealed. others available.

MOTOR DRIVE: 1/3 HP, 230/460/3, 60

cycle, ODP right angle gear motor. *NOTE: Orientation of product may be affected
because of straight rollers in curve. To maintain
SPEED: 45 FPM, constant. orientation, use tapered roller curve.

®
4 week shipment
70
MODEL 254TCDLRC
MEDIUM DUTY TAPERED ROLLER CHAIN DRIVEN LIVE ROLLER CURVE
Conveyor shown with SPECIFY MODEL NUMBER PER EXAMPLE
optional supports 254TCDLRC-39-90-R
254TCDLRC-(between frames)-(degree)-(left or right)

Model 254TCDLRC is a medium duty

TAPERED ROLLER chain driven live roller
curve, designed to transport medium duty
loads such as castings, drums or pallet loads.
Orientation of pallet loads are maintained when
using this chain driven live roller curve.

CHAIN DRIVEN LIVE ROLLERS

UNIT 90° 45°
CONV. OUTSIDE QTY. QTY.
BF WT (lbs.) WT. (lbs.)
SURFACE RADIUS RLRS. RLRS.
15” 12” 5’-2-1/2” 16 344 8 208
21” 18” 5’-2-1/2” 16 372 8 225
27” 24” 5’-2-1/2” 16 403 8 243
33” 30” 7’-9-1/4” 24 447 12 263
39” 36” 7’-9-1/4” 24 486 12 310
45” 42” 7’-9-1/4” 24 528 12 334
51” 48” 7’-9-1/4” 24 559 12 359

OPTIONAL EQUIPMENT
SPECIFICATIONS SPEED: Constant speed 1.5-60
TREAD ROLLERS: 2-1/2” dia. to 1-11/16” SPEED: 45 FPM, constant. FPM; DC variable speed; AC
dia. x 14 ga. steel tapered rollers, model
DRIVE LOCATION: Drive located on outside
inverter variable speed. Other con-
254T with sprockets.
of curve. Specify right hand drive or left stant or variable speeds available.
CHAIN DRIVE: Roller to roller with No. 60 hand drive (drive hand determined with NOTE: CAPACITY CHANGES WITH
circular roller chain. reference point located at outside of curve). SPEED. 100 FPM MAX. WITH
ROLLER-TO-ROLLER CHAIN DRIVE.
END DRIVE: Reversible drive, side mounted ELECTRICAL CONTROLS: Optional.
or underside (specify). Main drive roller MOTORS: Available through 3 HP
is supported by precision, heavy duty, in TEFC, explosion proof, dirty duty,
lubricated, ball bearing units. HP @ 115/230/1, 575/3, etc.
“C”
ROLLER CENTERS: 6” RC measured at 45FPM FLOOR SUPPORTS: Supports, knee
outside radius of curve. 1/3, 1/2 13-5/8” braces, casters, ceiling hangers and
CHAIN GUARD: Chain drive is enclosed, top 3/4 14” polytier supports available. See
and bottom, along entire length of conveyor. 1 14-1/4” Conveyor Accessories.
BEARINGS: Removable type, heavy duty 1-1/2 15-1/8” ELECTRICAL CONTROLS: Magnetic
bearings, zinc plated, grease packed, laby- 2 16” or manual starter; limit switch;
rinth sealed. others available.
MOTOR DRIVE: 3/4 HP, 230/460/3,
60 cycle, ODP right angle gear motor.
BED: 6” x 1-1/2” x 10 ga. and
4” x 1-1/2” x 10 ga. formed steel
4 week shipment
channel frame. ®

71
 MODEL 251CDLR
HEAVY DUTY CHAIN DRIVEN LIVE ROLLER
24 HOUR SHIPMENTS INCLUDE LENGTHS 5’-0” TO 80’-0” AS DETAILED BELOW
OVERALL WIDTH

1 1/2" BETWEEN FRAMES 1 1/2"

3" CONVEYING SURFACE

1/4"

6"
4"

"A"

Conveyor shown with

optional supports 3"

10 1/4" OVERALL WIDTH

1 1/2" BETWEEN FRAMES 1 1/2"

Model 251CDLR is a heavy duty chain driven live roller conveyor, 3" CONVEYING SURFACE

specifically designed to transport heavy loads such as tote pans, 1/4"

castings, drums, pallet loads, etc. It is especially suited for carrying

CHAIN DRIVEN LIVE ROLLERS

loads in the presence of oil and other such contaminates. 6 3/4"

HP @
“A” MAX “B” MAX
35FPM
3/4 13” 38-13/16”
1 13-1/4” 39-1/8”
1-1/2 14-1/8” 39-1/8”
2 15” 40-13/16”

SPECIFICATIONS
TREAD ROLLERS: 2-1/2” dia. x 11 ga. BEARINGS: Precision ABEC bearings. BED LENGTHS (6” or 12” RC): Intermediate
steel rollers, model 251S with sprockets. bed section lengths are
CHAIN GUARD: The chain drive is
CHAIN DRIVE: Roller to roller with No. 60 available in 1’-0” increments. Minimum
completely enclosed along the entire length
roller chain. overall conveyor length with drive 5’-0”.
of the conveyor.
Maximum overall conveyor length 80’-0”.
ROLLER CENTERS: 3”, 4-1/2”, 6”, BED LENGTHS (4-1/2” or 9” RC):
9” or 12”. (SEE NOTE FOR 3” RC) ELECTRICAL CONTROLS: Optional.
Intermediate bed section lengths 3’-0”,
CENTER DRIVE: Reversible drive either side 3’-9”, 4’-6”, 5’-3”, 6’-0”, 6’-9”, 7’-6”, SPEED: 35 FPM, constant.
mounted or underside mounted (specify). 8’-3”, 9’-0” and 9’-9” increments.
Main drive roller is supported by precision, Minimum overall conveyor length with
heavy duty, lubricated, ball bearing units. drive 5’-3”. Maximum overall conveyor
length: 58’-6” with 4-1/2” RC; 78’-0” *NOTE 3” RC: 3” RC are available
BED: 6” x 1-1/2” x 7 ga. and 4” x with 9” RC. with #40 chain on 40-14 double single
1-1/2” x 7 ga. formed steel channel frame. sprocket sleeves.
Bed sections attached with couplings and
floor supports.
MOTOR DRIVE: 3/4 HP, 230/460/3,
60 cycle, ODP right angle gear motor.

® OPTIONAL 3” RC NOW AVAILABLE

(guard removed for clarity)
72
SPECIFICATION TABLE
24 hour shipment
UNIT WEIGHTS (FOR 4-1/2” AND 9” ROLLER CENTERS ONLY)
CONVEYOR 5’-3” 9’-9” 19’-6” 29’-3” 39’ 48’-9” 58’-6” 68’-3” 78’
LENGTH
CONV. BF 4-1/2” 9” RC 4-1/2” 9” RC 4-1/2” 9” RC 4-1/2” 9” RC 4-1/2” 9” RC 4-1/2” 9” RC 4-1/2” 9” RC 9” RC 9” RC
SURFACE RC RC RC RC RC RC RC
12” 15” 317 282 522 452 928 788 1304 1099 1699 1427 2105 1763 2511 2099 2503 2844
18” 21” 347 307 577 497 1033 873 1455 1221 1899 1588 2355 1964 2811 2340 2753 3129
24” 27” 377 330 632 537 1138 948 1606 1328 2099 1729 2605 2140 3110 2551 3003 3414
30” 33” 407 352 687 577 1243 1023 1757 1435 2299 1870 2855 2316 3412 2762 3253 3699
36” 39” 443 373 753 613 1368 1088 1938 1528 2538 1993 3104 2419 3770 2945 3468 3944
42” 45” 472 395 807 652 1473 1163 2090 1636 2738 2134 3404 2645 4070 3156 3718 4229
48” 51” 500 415 862 692 1578 1238 2240 1743 2938 2275 3654 2821 4370 3367 3968 4514
51” 54” 516 428 890 713 1631 1277 2317 1799 3039 2348 3780 2913 4521 3477 4094 4657
54” 57” 532 440 917 732 1683 1313 2391 1850 3139 2418 3904 2998 4670 3579 4218 4799

CHAIN DRIVEN LIVE ROLLERS

60” 63” 567 460 982 767 1808 1378 2571 1943 3377 2539 4203 3150 5029 3761 4433 5044

UNIT WEIGHTS (FOR 6” AND 12” ROLLER CENTERS ONLY)

CONVEYOR 5’ 10’ 20’ 30’ 40’ 50’ 60’ 70’ 80’
LENGTH
CONV. BF 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12”
SURFACE RC RC RC RC RC RC RC RC RC
12” 15” 299 287 482 432 848 728 1214 1064 1580 1380 1946 1699 2312 2012 2678 2328 3044 2644
18” 21” 324 297 527 467 933 813 1339 1159 1745 1505 2151 1851 2557 2197 2963 2543 3369 2889
24” 27” 349 312 572 502 1018 878 1464 1254 1910 1630 2356 2006 2802 2382 3248 2758 3694 3134
30” 33” 374 332 617 537 1103 943 1589 1349 2075 1755 2561 2161 3047 2567 3533 2973 4019 3379
36” 39” 399 348 662 563 1188 988 1714 1429 2240 1840 2766 2266 3292 2692 3818 3118 4344 3544
42” 45” 424 367 707 597 1273 1053 1839 1509 2405 1965 2971 2421 3537 2877 4103 3333 4669 3789
48” 51” 449 387 752 632 1358 1118 1964 1604 2570 2090 3176 2576 3782 3062 4388 3548 4994 4034
51” 54” 462 400 775 650 1401 1151 2027 1652 2653 2153 3279 2654 3905 3155 4531 3656 5157 4157
54” 57” 474 407 797 667 1443 1183 2089 1699 2736 2216 3381 2731 4027 3247 4673 3763 5319 4279
60” 63” 499 422 842 692 1528 1228 2214 1764 2900 2300 3586 2836 4272 3372 4958 3908 5644 4444

OPTIONAL EQUIPMENT
SPEED: Constant speed 1.5-100 FPM; ELECTRICAL CONTROLS: Magnetic BED: 4” at 5.4 lb. and 6” at 8.2 lb.
DC variable speed; AC inverter variable starter (one direction or reversible); one structural steel channel frame.
speed. Other constant or variable speeds direction manual starter; momentary MOTORS: Available through 3 HP in
available. NOTE: CAPACITY CHANGES start/stop push button station; for-ward/ TEFC, explosion proof, dirty duty, brake
WITH SPEED. 100 FPM MAX. WITH reversing/stop push button motor, 115/230/1, 575/3, etc.
ROLL-TO-ROLL CHAIN DRIVE. station; mounting and pre-wiring for
FLOOR SUPPORTS: Supports, knee units 12’-0” long and under; limit switch,
braces, casters and polytier supports photo relay; others available.
available. See Conveyor Accessories.

ROLLER TO ROLLER CHAIN DRIVE ® OPTIONAL TOP ROLLER GUARD MOUNTED DRIVE
(guard removed for clarity)
73
 MODEL 297CDLR
HEAVY DUTY CHAIN DRIVEN LIVE ROLLER

Conveyor shown with

optional supports

Model 297CDLR is specifically designed to transport heavy loads

such as tote pans, castings, drums, pallet loads, etc. It is especial-
ly suited for carrying loads in the presence of oil and other such
contaminates. This chain driven live roller includes 7 gauge tread
rollers and structural steel frame as standard unit features.
CHAIN DRIVEN LIVE ROLLERS

HP @
“A” MAX “B” MAX
35FPM
3/4 13” 38-13/16”
1 13-1/4” 39-1/8”
1-1/2 14-1/8” 39-1/8”
2 15” 40-13/16”

SPECIFICATIONS
TREAD ROLLERS: 2-9/16” dia. x 7 ga. BEARINGS: Precision ABEC bearings. BED LENGTHS (6” or 12” RC):
steel rollers, model 297S with sprockets. Intermediate bed section lengths are
CHAIN GUARD: The chain drive is
available in 1’-0” increments. Minimum
CHAIN DRIVE: Roller to roller with No. completely enclosed along the entire
overall conveyor length with drive 5’-0”.
60 roller chain. length of the conveyor.
Maximum overall conveyor length 80’-0”.
CENTER DRIVE: Reversible drive either BED LENGTHS (4-1/2” or 9” RC):
MOTOR DRIVE: 3/4 HP, 230/460/3,
side mounted or underside mounted Intermediate bed section lengths 3’-0”,
60 cycle, ODP right angle gear motor.
(specify). Main drive roller is supported 3’-9”, 4’-6”, 5’-3”, 6’-0”, 6’-9”, 7’-6”,
by precision, heavy duty, lubricated, ball 8’-3”, 9’-0” and 9’-9” increments. ELECTRICAL CONTROLS: Optional.
bearing units. Minimum overall conveyor length with
ROLLER CENTERS: 3”, 4-1/2”, 6”, drive 5’-3”. Maximum overall conveyor
length: 58’-6” with 4-1/2” RC; 78’-0” *NOTE 3” RC: 3” RC are available
9”and 12”. with #40 chain on 40-14 double single
with 9” RC.
BED: 4” at 5.4 lbs. and 6” at 8.2 lbs. sprocket sleeves.
structural steel channel frame. Bed
sections attached with couplings and floor
supports.
SPEED: 35 FPM, constant.

® OPTIONAL 3” RC NOW AVAILABLE

(guard removed for clarity)
74
SPECIFICATION TABLE
4 week shipment
UNIT WEIGHTS (FOR 4-1/2” AND 9” ROLLER CENTERS ONLY)
CONVEYOR 5’-3” 9’-9” 19’-6” 29’-3” 39’ 48’-9” 58’-6” 68’-3” 78’
LENGTH
CONV. BF 4-1/2” 9” RC 4-1/2” 9” RC 4-1/2” 9” RC 4-1/2” 9” RC 4-1/2” 9” RC 4-1/2” 9” RC 4-1/2” 9” RC 9” RC 9” RC
SURFACE RC RC RC RC RC RC RC
12” 15” 389 299 629 494 1142 876 1635 1257 2093 1639 2603 2020 3102 2402 2783 3300
18” 21” 414 333 709 553 1297 987 1872 1420 2401 1854 2989 2287 3564 2721 3154 3588
24” 27” 454 354 789 609 1452 1093 2100 1577 2696 2061 3359 3287 4007 3029 3513 3997
30” 33” 492 388 857 653 1583 1177 2292 1700 2945 2224 3671 2747 4380 3271 3794 4318
36” 39” 536 418 936 708 1736 1282 2517 1855 3237 2430 4037 3002 4818 3576 4149 4723
42” 45” 573 446 1013 761 1885 1384 2736 2006 3520 2630 4392 3251 5243 3874 4496 5119
48” 51” 620 479 1090 814 2034 1481 2955 2147 3805 2814 4749 3480 5670 4147 4813 5480
51” 54” 640 491 1130 841 2109 1532 3065 2223 3948 2914 4927 3605 5883 4296 4987 5678
54” 57” 662 507 1167 867 2183 1583 3174 2298 4090 3014 5105 3729 6096 4445 5160 5876

CHAIN DRIVEN LIVE ROLLERS

60” 63” 701 537 1246 922 2336 1688 3399 2453 4380 3219 5470 3984 6532 4750 5530 6281

UNIT WEIGHTS (FOR 6” AND 12” ROLLER CENTERS ONLY)

CONVEYOR 5’ 10’ 20’ 30’ 40’ 50’ 60’ 70’ 80’
LENGTH
CONV. BF 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12” 6” RC 12”
SURFACE RC RC RC RC RC RC RC RC RC
12” 15” 333 278 549 439 982 769 1415 1099 1848 1429 2281 1759 2714 2039 3147 2419 3850 2749
18” 21” 370 315 618 488 1115 859 1612 1228 2109 1598 2606 1968 3103 2338 3600 2708 4097 3078
24” 27” 405 350 684 534 1242 944 1800 1354 2358 1764 2916 2174 3474 2584 4032 2994 4590 3404
30” 33” 435 380 738 568 1345 1008 1952 1448 2559 1888 3166 2328 3773 2768 4380 3208 4987 3648
36” 39” 470 415 803 613 1470 1093 2137 1573 2804 2053 3471 2533 4138 3013 4805 3493 5472 3973
42” 45” 504 449 866 656 1591 1176 2316 1696 3041 2216 3766 2736 4491 3256 5216 3776 5941 4296
48” 51” 538 483 929 699 1712 1249 2495 1799 3278 2349 4061 2899 4844 3449 5627 3999 6410 4549
51” 54” 554 499 961 721 1773 1291 2585 1861 3397 2431 4209 3001 5021 3571 5833 4141 6645 4711
54” 57” 572 517 992 742 1833 1332 2674 1922 3516 2512 4356 3102 5197 3692 6038 4282 6879 4872
60” 63” 607 552 1057 787 1958 1417 2859 2047 3760 2677 4661 3307 5562 3937 6463 4567 7364 5197

OPTIONAL EQUIPMENT
SPEED: Constant speed 1.5-100 FPM; MOTORS: Available through 3 HP in ELECTRICAL CONTROLS: Magnetic
DC variable speed; AC inverter variable TEFC, explosion proof, dirty duty, brake starter (one direction or reversible); one
speed. Other constant or variable speeds motor, 115/230/1, 575/3, etc. direction manual starter; momentary
available. NOTE: CAPACITY CHANGES FLOOR SUPPORTS: Supports, knee start/stop push button station; forward/
WITH SPEED. 100 FPM MAX. WITH braces, casters and polytier supports reversing/stop push button
ROLL-TO-ROLL CHAIN DRIVE. available. See Conveyor Accessories. station; mounting and pre-wiring for
units 12’-0” long and under; limit switch,
photo relay; others available.

ROLLER TO ROLLER CHAIN DRIVE ® OPTIONAL TOP ROLLER GUARD MOUNTED DRIVE
(guard removed for clarity)
75
 MODEL 3530CDLR
HEAVY DUTY CHAIN DRIVEN LIVE ROLLER

Conveyor shown with

optional supports

Roach model 3530CDLR is ideal for transporting very heavy unit

loads. This heavy duty chain driven live roller is designed with
heavy .300 wall steel rollers, larger size roller chain and heavy
duty structural frame and supports for applications demanding
ultra-durable construction for longevity and durability.
CHAIN DRIVEN LIVE ROLLERS

HP @
“A” “B” MAX
35FPM
3/4 16” 38-13/16”
1 16-1/4” 39-1/8”
1-1/2 17-1/8” 39-1/8”
2, 3 18-1/2” 40-13/16”
2 18-1/2” 41-13/16”

SPECIFICATIONS
TREAD ROLLERS: 3-1/2” dia. x .300 wall BED LENGTHS (7-1/2” RC, #80 CHAIN): BED: 6” at 8.2 lbs. and 8” at 11.5 lbs.
steel, model 3530S with sprockets. Intermediate bed section lengths 3’-1-1/2”, structural steel frame. Bed sections
CHAIN GUARD: The chain drive is 3’-9”, 4’-4-1/2”, 5’-0”, 5’-7-1/2”, 6’-3”, attached with couplings and floor supports.
completely enclosed along the entire length 6’-10-1/2”, 7’-6”, 8’-1-1/2”, 8’-9”, MOTOR DRIVE: 3/4 HP, 230/460/3,
of the conveyor. 9’-4-1/2” and 10’-0”. Minimum overall 60 cycle, ODP right angle gear motor.
conveyor length with drive 5’-0”.
CENTER DRIVE: Reversible drive either side Maximum overall conveyor length 80’-0”. ROLLER CAPACITY: 2500 lbs. per roller.
mounted or underneath mounted (specify). ELECTRICAL CONTROLS: Optional.
Main drive roller is supported by precision, ROLLER CENTERS: 6” with No. 60 chain;
heavy duty, lubricated, ball bearing units. 7-1/2” and 12” with No. 80 chain.
CHAIN DRIVE: Roller to roller with No. 60
BEARINGS: Precision ABEC bearings.
or No. 80 roller chain.
BED LENGTHS (6” RC, #60 CHAIN AND
SPEED: 35 FPM constant.
12” RC, #80 CHAIN): Intermediate bed
section lengths 3’-0”, 4’-0”, 5’-0”, 6’-0”,
7’-0”, 8’-0”, 9’-0” and 10’-0” increments.
Minimum overall conveyor length with
drive 5’-0”. Maximum overall conveyor
length 80’-0”.

76
SPECIFICATION TABLE
4 week shipment
CONVEYOR LENGTH 10’ 20’ 30’ 40’ 50’ 60’ 70’ 80’
CONV. CHAIN
BF RC UNIT WEIGHTS (lbs.)
SERFACE SIZE
6” 60 1453 2873 4293 5713 7133 8553 9973 11393
35” 39” 7-1/2” 80 1337 2950 4563 6176 7789 9402 11015 12628
12” 80 990 1950 2910 3870 4830 5790 6750 7710
6” 60 1605 3179 4753 6327 7901 9475 11049 12623
41” 45” 7-1/2” 80 1472 3165 4858 6551 8244 9937 11630 13323
12” 80 1074 2104 3134 4164 5194 6224 7254 8284
6” 60 1757 3485 5213 6941 8669 10397 12125 13853
47” 51” 7-1/2” 80 1607 3380 5153 6926 8699 10472 12245 14018
12” 80 1159 2269 3379 4489 5599 6709 7819 8929

CHAIN DRIVEN LIVE ROLLERS

6” 60 1909 3791 5673 7555 9437 11319 13201 15083
53” 57” 7-1/2” 80 1743 3596 5449 7302 9155 11008 12861 14714
12” 80 1243 2423 3603 4783 5963 7143 8323 9503

OPTIONAL EQUIPMENT
SPEED: Constant speed 1.5-100 FPM; ELECTRICAL CONTROLS: Magnetic MOTORS: Available through 5 HP in
DC variable speed; AC inverter variable starter (one direction or reversible); one TEFC, explosion proof, dirty duty, brake
speed. Other constant or variable speeds direction manual starter; momentary motor, 115/230/1, 575/3, etc.
available. NOTE: CAPACITY CHANGES start/stop push button station; forward/
WITH SPEED. 100 FPM MAX. WITH reversing/stop push button
ROLL-TO-ROLL CHAIN DRIVE. station; mounting and pre-wiring for
units 12’-0” long and under; limit switch,
FLOOR SUPPORTS: Supports and
photo relay; others available.
knee braces available. See Conveyor
Accessories.

ROLLER TO ROLLER CHAIN DRIVE OPTIONAL TOP ROLLER GUARD MOUNTED DRIVE
(guard removed for clarity)

77
 MODEL 251CDLRC
HEAVY DUTY CHAIN DRIVEN LIVE ROLLER CURVE
SPECIFY MODEL NUMBER PER EXAMPLE
251CDLRC-39-90-L
251CDLRC-(between frames)-(degree)-(left or right)

Conveyor shown with

optional supports

251CDLRC, heavy duty chain driven live roller curve, transports heavy unit loads. Heavy castings, drums
and other loads not requiring product orientation may be effectively conveyed on this conveyor.
CHAIN DRIVEN LIVE ROLLERS

UNIT 90° 45°

CONV. OUTSIDE
BF QTY. RLRS. WT (lbs.) QTY. RLRS. WT (lbs.)
SURFACE RADIUS
15” 12” 7’-1-1/2” 22 624 11 347
21” 18” 7’-1-1/2” 22 672 11 374
27” 24” 7’1-1/2” 22 721 11 401
33” 30” 7’-1-1/2” 22 769 11 428
39” 36” 7’-1-1/2” 22 815 11 454
45” 42’ 10’-3-3/4” 32 1244 16 672
51” 48” 10’-3-3/4” 32 1383 16 744
57” 54” 10’-3-3/4” 32 1531 16 827
63” 60” 10’-3-3/4” 32 1680 16 909

SPECIFICATIONS OPTIONAL EQUIPMENT

TREAD ROLLERS: 2-1/2” dia. x 11 ga. CHAIN GUARD: The chain drive is enclosed, BED: Rollers on 4-1/2” centers on
steel, model 251S with sprockets. top and bottom, along the entire length of the outside radius.
CHAIN DRIVE: Roller to roller with No. 60 conveyor. SPEED: Constant speed 1.5-60
circular roller chain. DRIVE LOCATION: Drive located on outside FPM; DC variable speed; AC
END DRIVE: Reversible drive either side of curve. Specify right hand drive or left inverter variable speed. Other con-
mounted or underside (specify). Main drive hand drive (drive hand determined with stant or variable speeds available.
roller is supported by precision, heavy duty, reference point located at outside of curve). NOTE: CAPACITY CHANGES WITH
lubricated, ball bearing units. ELECTRICAL CONTROLS: Optional. SPEED. 100 FPM MAX. WITH
ROLLER-TO-ROLLER CHAIN DRIVE.
BEARINGS: Precision ABEC bearings.
ROLLER CENTERS: 6” RC measured at HP @ MOTORS: Available through 3 HP
“C”
outside radius of curve. 35FPM in TEFC, explosion proof, dirty duty,
3/4 13” 115/230/1, 575/3, etc.
MOTOR DRIVE: 3/4 HP, 230/460/3,
60 cycle, ODP right angle gear motor. 1 13-1/4” FLOOR SUPPORTS: Supports,
1-1/2 14-1/8” knee braces, casters, and polytier
SPEED: 35 FPM, constant.
2 15 supports available. See Conveyor
BED: 6” x 1-1/2” x 7 ga. and 4” x 1-1/2” x Accessories.
7 ga. formed steel channel frame.
*NOTE: Orientation of product may be affected
because of straight rollers in curve. To maintain
orientation, use tapered roller curve.

®
4 week shipment
78
MODEL 297CDLRC
HEAVY DUTY CHAIN DRIVEN LIVE ROLLER CURVE
SPECIFY MODEL NUMBER PER EXAMPLE
297CDLRC-57-45-R
297CDLRC-(between frames)-(degree)-(left or right)

Conveyor shown with

optional supports

Model 297CDLRC features structural steel channel frames for conveying heavy unit loads. Heavy cast-
ings, drums and numerous other loads not requiring product orientation may be transported on this
heavy duty chain driven live roller curve.

UNIT 90° 45°

CHAIN DRIVEN LIVE ROLLERS

CONV. OUTSIDE
BF QTY. RLRS. WT (lbs.) QTY. RLRS. WT (lbs.)
SURFACE RADIUS
15” 12” 7’-1-1/2” 22 736 11 421
21” 18” 7’-1-1/2” 22 846 11 495
27” 24” 7’1-1/2” 22 956 11 540
33” 30” 7’-1-1/2” 22 1066 11 750
39” 36” 7’-1-1/2” 22 1176 11 811
45” 42’ 10’-3-3/4” 32 1625 16 872
51” 48” 10’-3-3/4” 32 1735 16 965
57” 54” 10’-3-3/4” 32 1845 16 1026

OPTIONAL EQUIPMENT
BED: Rollers on 4-1/2” centers on
SPECIFICATIONS outside radius.
TREAD ROLLERS: 2-9/16” dia. x 7 ga. SPEED: 35 FPM, constant. SPEED: Constant speed 1.5-60
steel, model 297S with sprockets.* FPM; DC variable speed; AC
DRIVE LOCATION: Drive located on outside
CHAIN DRIVE: Roller to roller with No. 60 of curve. Specify right hand drive or left inverter variable speed. Other con-
circular roller chain. hand drive (drive hand determined with stant or variable speeds available.
END DRIVE: Reversible drive, either side reference point located at outside of curve). NOTE: CAPACITY CHANGES WITH
mounted or underside (specify). Main drive ELECTRICAL CONTROLS: Optional. SPEED. 100 FPM MAX. WITH
roller is supported by precision, heavy duty, ROLLER-TO-ROLLER CHAIN DRIVE.
lubricated, ball bearing units. MOTORS: Available through 3 HP
CHAIN GUARD: Chain drive is enclosed, top HP @ in TEFC, explosion proof, dirty duty,
“C”
and bottom, along entire length of conveyor. 35FPM 115/230/1, 575/3, etc.
ROLLER CENTERS: 6” RC measured at 3/4 13” FLOOR SUPPORTS: Supports,
outside radius of curve. 1 13-1/4” knee braces, casters, and polytier
BED: 4” at 5.4 lbs. and 6” at 8.2 lbs. 1-1/2 14-1/8” supports available. See Conveyor
structural steel channel frame. 2 15 Accessories.
BEARINGS: Precision ABEC bearings.
MOTOR DRIVE: 3/4 HP, 230/460/3, *NOTE: Orientation of product may be affected
60 cycle, ODP right angle gear motor. because of straight rollers in curve. To maintain
orientation, use tapered roller curve.

®
4 week shipment
79
 MODEL 351TCDLRC
HEAVY DUTY TAPERED ROLLER CHAIN DRIVEN LIVE ROLLER CURVE
SPECIFY MODEL NUMBER PER EXAMPLE
351TCDLRC-51-90-R
351TCDLRC-(between frames)-(degree)-(left or right)

Conveyor shown with side mounted

drive and optional supports

351TCDLRC is a true taper heavy duty chain driven live roller curve. Ideal for conveying pallets
or other heavy unit loads, this conveyor features “true taper” to maintain product orientation
throughout the curve.
CHAIN DRIVEN LIVE ROLLERS

UNIT 90° 45°

LARGE SMALL OUTSIDE QTY. WT QTY. WT
BF
O.D. O.D. RADIUS RLRS. (lbs.) RLRS. (lbs.)
21” 3-1/4” 2-1/2” 6-6” 20 778 10 423
27” 3-1/2” 2-1/2” 7’-1-1/2” 22 966 11 524
33” 3-3/4” 2-1/2” 7’-9-1/4” 24 1192 12 644
39” 4” 2-1/2” 8’-4-3/4” 26 1460 13 787
45” 4-1/4” 2-1/2” 8’-4-3/4” 26 1523 13 801
51” 4-1/2” 2-1/2” 9-1/2” 28 1889 14 990
57” 4-3/4” 2-1/2” 9’8” 30 2307 15 1210
63” 5” 2-1/2” 10-3-3/4” 32 2789 16 1464

OPTIONAL EQUIPMENT
SPECIFICATIONS
TREAD ROLLERS: Heavy duty 11 ga. CHAIN GUARD: The chain drive is BED: Rollers on 4-1/2” centers on
tapered rollers, model 351T with enclosed, top and bottom, along the outside radius for 21”-39” BF.
sprockets, for true taper effect. See chart, entire length of the conveyor. FLOOR SUPPORTS: Supports avail-
upper right corner for roller dia. MOTOR DRIVE: 3/4 HP, 230/460/3, able. See Conveyor Accessories.
CHAIN DRIVE: Roller to roller with 60 cycle, ODP right angle gear motor.
SPEED: Constant speed 1.5-60
No. 60 circular roller chain. DRIVE LOCATION: Drive located on FPM; DC variable speed; AC
END DRIVE: Reversible drive either side outside of curve. Specify right hand drive
inverter variable speed. Other con-
mounted or underside (specify). Main or left hand drive (drive hand
drive roller is supported by precision, determined with reference point located stant or variable speeds available.
heavy duty, lubricated, ball bearing units. at outside of curve). NOTE: CAPACITY CHANGES WITH
SPEED. 100 FPM MAX. WITH
ROLLER CENTERS: 6” RC measured at ELECTRICAL CONTROLS: Optional.
outside radius of curve. ROLLER-TO-ROLLER CHAIN DRIVE.
HP @
“C”
35FPM MOTORS: Available through 3
SPEED: 35 FPM, constant.
3/4 15”
BED: 5” at 6.7 lbs. and 7” at 9.8 lbs. HP in TEFC, explosion proof, dirty
1 15-1/4”
structural steel channel frame. duty, 115/230/1, 575/3, etc.
1-1/2 16-1/8”
BEARINGS: Precision ABEC bearings. 2 17

®
6 week shipment
80