barriers

traffic
ACCESS
CONTROL
Hi-tech.
Advanced.
Multifaceted.
These are some of the terms that best describe
our diverse range of access control offerings.
 SYSTEMs
ACCESS CONTROL
SOLO
Standalone Proximity Access Control System Technical Specifications
Product Code: SOLO0001V1

Technical Data SOLO

SOLO is designed for small standalone access control applications where security, cost and simplicity are important. This reader Input voltage 10V – 12V AC or 11V – 15V DC
allows for easy programming of up to 50 user tags as well as selective, easy adding and deleting of users thanks to the reader’s Current draw
exceptionally user-friendly LED-based interface. Quiescent 110mA
Maximum 150mA
Tag frequency 13.56MHz
Read range 80 – 100mm
Main Features Reader dimensions (mm)
Surface-mount Width: 90mm x Depth: 30mm x Height:129mm
Mechanical Features • Free-exit input Flush-mount Width: 86mm x Depth: 15mm x Height:124mm
• Optional secure link (SmartSwitch II) – additional security • Door Sense input Weight 0.1kg
measure to prevent unauthorised access even if the unit is Temperature range -20°C to 50°C
• Output for external alarm – alarm is generated under the
tampered with Humidity 0 – 90% (non-condensing)
following conditions:
• Weatherproof reader Degree of protection IP55
• Door Held Open for an extended period of time Number of tags (including Masters) 51
• Optional anti-knock shield for reader
• Door Forced Open Number of Master tags 2
Electronic Features Voltage-free relay output √
• 50 user tag memory – ideal for basic proximity access Relay time configurable (off/1 - 254s/latching) √
applications Door Open Timer (0 - 254s/continuous) √
Door Open Pre-warn Timer (0 - 254s/continuous) √
• Tags are encrypted and cannot be cloned
Door Open Alarm (Off/1 - 254s/continuous) √
• Excellent read range Door Forced Alarm (Off/1 - 254s/continuous) √
• 13.56MHz operating frequency User interface 5 LEDs
Door Sense Input √
• Output is configurable as follows:
Free-exit input √
• Pulsed output configurable from 1 - 254 seconds Onboard buzzer √
• Latched output Output for optional external alarm √
SmartSwitch II compatible √
Anti-tamper switch facility √
Networkable -
Anti Passback -
Firmware upgrade facility √

TM

10mm

125mm
85mm 29mm 25mm

Standalone
Proximity Access
www.CentSys.com Control System page 131
 SYSTEMs
ACCESS CONTROL
Lattice
Networked Proximity Access Control System
Product Code: Lattice Controller: LATC0003V1, Lattice Slave Head: LATS0001V1

Technical Specifications
Start as a standalone proximity unit and expand into a powerful networked system with up to 32 readers. A handy three-digit LED
display allows for easy programming of user tags and Lattice’s user-friendly interface makes selective adding and deleting of tags Lattice L1000 LSH
veritable child’s play. For added functionality and even simpler administration, the system can be interfaced with the LatticeWARE Input voltage 9V - 12V AC or 12V - 15V DC
computer software package. Lattice allows for the addition of up to 1000 user tags. Current draw:
Standby 110mA 110mA
Operating 170mA 150mA
Main Features Tag frequency 13.56MHz
Read range 80 - 100mm
Mechanical Features • Dual outputs on the controller and a single output on the Reader dimensions
Slave Heads – configurable as follows: Surface-mount Width: 85mm x Depth: 29mm x Height:125mm
• Weatherproof reader
Flush-mount Width: 85mm x Depth: 10mm (visible) x Height:125mm
• Optional anti-knock shield for reader • Pulsed output configurable from 1 - 254 seconds
Weight 0.1kg
• Optional secure link (SmartSwitch II) • Latched output Temperature range -10 to +50°C
• Free-exit input Humidity 0- 90% (non-condensing)
• Choose from either surface-mount or flush-mount fascias
Standalone capability √ -
(included in kit) • Door Sense input
Dipswitch configurable network address - √
Electronic Features • Output for external alarm – alarm is generated under the Relay time configuration (Off/1 -254s/Latch) √ √
• 1000 user tag memory – perfect for larger applications with following conditions: Open collector output time configuration (Off/1 - 254s/latch) √ √
many users • Door Held Open for an extended period of time Door Open Timer (0 - 255s) √ √
Door Open Pre-warn Timer (0 - 254s/infinite) √ √
• Tags are encrypted and cannot be cloned • Door Forced Open
Door Open Alarm (Off/1 - 254s/infinite) √ √
• 13.56MHz operating frequency • Anti-passback for improved security Door Forced Alarm (Off/1 - 254s/infinite) √ √
• Start with a standalone controller and add up to 31 • Limited Uses support – useful in pay-per-use and security Reduced power consumption √ √
Slave Heads – great versatility applications Functional tags in off-line situation 1000 40
Output channels 2 1
• Excellent read range • Backup Memory Module available
Voltage-free relay output (Potential-free) √ √
Open collector output (SmartSwitch II enabled) √ √1
Free-exit input (Potential free normally open contact - FRX) √ √
Door Sense input (Potential free normally closed contact - DOOR SEN) √ √
Output for optional external alarm (Potential free normally closed contact -
√ √
Optional extra)
Anti-tamper Indication √ √
User interface - 3 digit display + 3 LEDs √ -
User interface - 5 LEDs - √
Hardware link to TUH (Lattice Take-up Head) √ -
Alarm output time(s) increments 0 - 254 sec; adjustable in 1 sec increments

1. Jumper on Slave Head selects between relay or open collector output.

TM

10mm

125mm
85mm 29mm 25mm

networked
Proximity Access
www.CentSys.com Control System page 133
 SYSTEMs
ACCESS CONTROL
LatticeWARE SOLO and Lattice
Networked Proximity Access Control System Accessories
Product Code: Take-up head: LATTUH01V2

SmartSwitch II SOLO and Lattice Anti-knock Shield

The LatticeWARE software is intuitive, easy to use and greatly enhances the functionality of the Lattice system. Product Code: SMARTSW2V1 Product Code: SOLOAKS0V1

The Lattice system, whether a standalone reader or networked system, can be further scaled by adding a PC. The PC or laptop
becomes the Lattice server, which will now behave as the brains of the operation. The PC links to the controller via the Lattice
Take-up Head (TUH). The TUH provides the system with a convenient tag reader for initial tag take-up and administration
The LatticeWARE software makes the task of modifying and managing the system far simpler.

Main Features

Electronic Features
• Interface with the Lattice system at any stage The SmartSwitch II serves as an interface board that A Grade 304 stainless steel enclosure with a stylish and
provides for an additional security measure, effectively durable brushed finish for protecting your SOLO and
• Complete and easy setup guarding your system against any unwarranted triggers. Lattice reader from getting knocked and damaged.
It relies upon the receipt of a coded signal from the
• Full management of the system
controller, which will then respond to the trigger.
• Integrated time-barring support
• Multiple operating reports with export capability
SOLO and Lattice Tamper Indication Backup Memory Module – Lattice
• LatticeWARE accessible from any PC in a networked system Switch Controller
Product Code: SOLOTAMP01 Product Code: PCA11667V1

A useful ancillary micro-switch that can be connected to Effortlessly create a backup of all tags and settings saved
the reader’s onboard buzzer or a third party alarm system to a Lattice controller’s memory for superior data security.
and provides an output whenever the reader is removed
from its enclosure.

TM

networked
Proximity Access
www.CentSys.com Control System page 135
 SYSTEMs
ACCESS CONTROL
SAFLEC
Comprehensive Access Control System
Various kit combinations available - refer to Price List

Example of a Typical System Configuration

An excellent access control system for small, medium and large networked installations. Besides the proximity access control
readers, the system can cater for many different components such as biometric readers, Time and Attendance-compliant readers,
and keypad access control.

The network integrates with various protocols such as Wiegand; RS-485 and RS-232 allowing for network flexibility.

Main Features

• Networked, scalable access control system

• Easy user-friendly installation and administration
• Anti-passback, timed Anti-passback and Zone Control
• Flexible Time & Attendance exporting
• Site-based configuration and hardware filtering
• Graphical event and alert monitoring and control
• PC-based actions for controlling third party devices such as
CCTV, intrusion and fire systems

Comprehensive
Access Control
www.CentSys.com System page 137
 SYSTEMs
ACCESS CONTROL
SAFLEC Door Controllers
Comprehensive Proximity Access Control System
Various kit combinations available - refer to Price List

The Multiple Door Controllers can cater for, as a standard, five doors with a reader on both sides of each door for access control Proximity Readers
in both directions, and up to 3200 tag-holders. The tag holder capacity is expandable up to 30 000, depending on the expansion Comprehensive Proximity Access Control System
boards utilised. Using remote I/O boards the system can be expanded for a further three doors, totalling eight off the same Various kit combinations available - refer to Price List
controller. A total of 16 controllers can be networked together to handle up to 256 readers or 128 doors.
However, multiple 16-controller networks can be linked together via a PC to create an ever-expanding access control mega- SAFLEC readers cover the majority of proximity access control needs, with the Wiegand Reader SSR-202 connecting to
network. Wiegand-compatible controllers

Multiple door Multiple door SDC-220 Two-door

controller SDC-550 controller SDC-520 controller Wiegand Reader Proximity Reader USB Take-on Reader
SSR-202 SSR-201 SSR-221
Maximum door capacity 1 8 8 2
High-bright, tri-colour LED √ √ √
Tag holder capacity 2 3200 30 000 1000
Audible buzzer with different sounds for allowing
Robust RS-485 reader connection 16 3 16 3 4 (isolated) 3 √ √ -
and denying access
Relay outputs - can be potential-free or powered 5 2 2 Industry standard 125khz operational frequency √ √ √
Digital inputs 4 8 4 4 Reads Hitag1, Hitag 2, EM4102 card technologies √ √ √
Wiegand interface connections - 2 2 Rotary-coded address switch for easy addressing √ √ -
Events and actions on controller √ √ - Configurable bitmasking for limiting card number
√ √ √
Controller offline transaction buffer capacity 6000 40 000 100 000 length from 16 to 40 bits
Robust isolated RS-485 bus between controllers Wiegand standard connection √ - -
√ √ -
with high stability and surge protection 5 USB Connectivity - - √
Onboard communication port Optional TCP/IP TCP/IP TCP/IP
Weatherproof enclosure with lockable hinged
√ √ √
access door
Integrated power supply 6 4.5A 2.6A 2.6A
Battery backup 7Ah 7Ah 7Ah
Mains monitoring with a battery charging circuit
√ √ √
and a low-voltage cut off
Rotary coded address switch for easy addressing √ √ -
Diagnostic LEDs for easy testing √ √ √

1. Additional expansion modules required 4. 2 inputs may be configured to Automatic Fire and Tamper Control
2. Expandable to 30,000 via SEB-700 TCP/IP module 5. Maximum 16 controllers per device network (unlimited device networks)
3. Either isolated or networked topology 6. Maximum controller output 3A

Comprehensive
Access Control
www.CentSys.com System page 139
 SYSTEMs
ACCESS CONTROL
SMARTGUARD
High-Security Keyless Access Control Technical Specifications
Product Code: SK/1BLK (SMARTGUARD), SK/AIRBLK (SMARTGUARDair)

Technical Data SMARTGUARD SMARTGUARDair

The CENTURION SMARTGUARD range provides efficient, secure keyless access control by enabling users to store up to 1000 Input voltage 12V - 24V AC/DC 2 x AA Alkaline batteries (included)
unique codes comprising one to ten digits in its non-volatile memory. A variety of electrical devices can be activated (including gate Current 32mA (standby) – 180mA (max) NA
operators, alarm panels, water pumps, etc.) by making use of one or more of the outputs provided. Operating temperature -20oC – +60oC -18oC – +55oC
Operating range NA Up to 30m
Operating frequency NA 433MHz
Models Available Outputs
3 (1 Relay output, 2 open collector
Up to 15 individual channels
outputs)
SMARTGUARD: Multi-function, high-security, wired, keypad access-control. Output pulse time range 1 – 255 sec (adjustable) or latched NA
Memory 1000 user codes 1000 user codes
SMARTGUARDair: High-security, wireless, keypad access control.
Dimensions Width:80mm x Depth: 38mm x Height: 132mm
Housing material Polycarbonate
Degree of protection IP55
Main Features

SMARTGUARD SMARTGUARDair
• SMARTGUARD for hard-wired installations – compatible with • Wireless for quick and easy installations
almost any access control device • 1000 unique codes using one to ten digits – for greater
• 1000 unique codes using one to ten digits – for greater security and versatility in a multi-user application
security and versatility in a multi-user application • 15 channel output – activate up to 15 compatible devices
• Three channel output – activate up to three devices • Selectively add and delete user codes – convenient and
• Selectively add and delete user codes – convenient and secure management of the system
secure management of the system • Backup Memory Module – guarantees data security
• Backup Memory Module – guarantees data security • Limited-uses counter – grant access to armed response,
• Limited Uses Counter – grant access to armed response, garden services, etc. - codes are automatically rendered
garden services, etc. - codes are automatically rendered invalid after use
invalid after pre-set number of uses • Operates on two AA Alkaline batteries (included), or a
separate 12V power supply
• Up to two years of battery life with up to 300 uses per day
• Wireless operating range of up to 30 metres (line of sight)
• Compatible with CENTURION’s code-hopping receivers

TM

TM

132mm
80mm 38mm

networked
Proximity Access
SMARTGUARD SMARTGUARDair

www.CentSys.com Control System page 141

 SYSTEMs
ACCESS CONTROL
SMARTGUARD and SMARTGUARDair Access Control Kits
Accessories
SOLO Standalone System Kit Lattice Controller Kit
Memory Module Anti-tamper Switch
Product Code: CP108 Product Code: CP19 Product Code: SOLO0001V1 Product Code: LATC0003V1
• 1 x SOLO reader – Surface or Flush-Mount 1 • 1 x Lattice controller – Surface or Flush-Mount 2
• Order tags as needed • Order tags as needed

Lattice Slave Kit Lattice Take-up Head Kit

Create a backup of all users and settings stored in your An optional independent tamper switch can be fitted to Product Code: LATS0001V1 Product Code: LATTUH01V2
keypad’s memory using this compact and useful memory provide a contact indicating if the unit has been forced open, • 1 x Lattice Slave Head – Surface or Flush-Mount 2 • 1 x Lattice Take-up Head, USB-type 3
module. or removed from its mountings.
• 1 x Software package

Anti-knock Shield SmartSwitch II

Product Code: SK/AKS Product Code: SMARTSW2V1 SAFLEC SDC-220 Door Controller Kit SAFLEC SDC-520 Door Controller Kit

Product Code: SFSDC22000 Product Code: SFSDC52000

• 1 x Controller 5 • 1 x Controller 5
• 1 x Lockable enclosure 5 • 1 x Lockable enclosure 5
• 1 x Power supply 5 • 1 x Power supply 5
• 1 x Battery 5 • 1 x Battery 5

SAFLEC SDC-550 Door Controller Kit SMARTGUARDair kit

An anti-knock shield constructed from brushed Grade 304 An interface board that provides additional security. It will
stainless steel. Also available in mild steel. only respond to a coded signal from the SMARTGUARD
Product Code: SFSDC55000 Product Code: SK/AIR_R1B
keypad. This ensures that - unauthorised person can operate
the device by simply opening the keypad and shorting wires • 1 x Controller 5 • 1 x SMARTGUARDair keypad 4
to trigger the device. • 1 x Lockable enclosure 5 • 2 x AA Alkaline batteries B
• 1 x Power supply 5 • 1 x Single-channel CENTURION receiver C
• 1 x Battery 5
Relay Switch Nova Single- and Multichannel Receivers
Product Code: CP106 Various products available - refer to Price List

This optional controller interfaces with the open collector SMARTGUARDair interfaces with high-security NOVA code-
output of the SMARTGUARD hard-wired keypad to provide a hopping receivers. 2 3 4
1 5
potential-free contact (normally-open/normally-closed). Lattice
SOLO Lattice SMARTGUARDair SAFLEC SDC-220
It can be used to operate a door lock, gate operator, Reader Reader Take-up Head Keypad
roller-shutter operator, traffic barrier, etc. SAFLEC SDC-520
SAFLEC SDC-550

A B C
Access Tag AA Alkaline Batteries Single-channel
CENTURION Receiver

networked
Proximity Access
www.CentSys.com Control System page 143
 SYSTEMs
ACCESS CONTROL
SAFLEC Software SAFLEC Expansion Boards
Comprehensive Access Control System Comprehensive Access Control System
Various kit combinations available - refer to Price List Various kit combinations available - refer to Price List

SAFLEC software is available in three different levels to suit the needs of any installation, - matter how large and sophisticated, or Expansion boards offer a seemingly never-ending list of additional functionality to the SAFLEC system. From adding
small and simple. additional inputs and outputs and increasing memory to converting the interface protocol, virtually all potential user
requirements are catered for.
The Corporate Edition is the most comprehensive package, followed closely by the Professional Edition.
The Standard Edition, included free with the purchase of a SDC-550 Multiple Door Controller, is a good solution for smaller
installations where the full functionality of the SAFLEC system is not required. SEB 720 Remote I/O Expansion Board SEB-722 Remote I/O Expansion Board
Product Code: SFSSEB72000 Product Code: SFSSEB72200

Main Features • 2 x Outputs (potential-free/powered) • 2 x Outputs (potential-free/powered)

• 4 x Digital inputs • 4 x Digital/analogue inputs
• Easy user-friendly installation and administration • Quick search filters, low bandwidth setting and on-the-fly
configuration • Support for 1 x Wiegand device or 4 x RS-485 readers • Support for 2 x Wiegand device or 4 x RS-485 readers
• Anti-passback, Timed Anti-passback and Zone Control for
greater security • Random search and tag-holder counters for scripting • Connects to SDC-550 and SDC-520 on reader network • Connects to SDC-550 and SDC-520 on reader
network
• Flexible Time & Accumulation exporting • Software plug-in for PC-based overrides or custom
extensions • Lockable enclosure
• Site-based configuration and hardware filtering
• Power supply
• Graphical event and alert monitoring and control
• Battery
• PC-based actions for controlling third party devices such as
CCTV, intrusion and fire systems
• Tag-holder sequencing tasks (enforcing Time & Attendance
clockings) SEB 721 Remote I/O Expansion Board SEB 700 TCP/IP & Memory
with Onboard Receiver Expansion Board for SDC-550
Product Code: SFSSEB72100 Product Code: SFSEB70000

Corporate Edition Professional Edition Standard Edition

SSS-110 SSS-130 SSS-100 • 4 x receiver channels; each receiver can control up to • Increase tag holder capacity to 30 000
Product Code: SFSSS11000 Product Code: SFSSS13000 Product Code: SFSSS10000 four buttons • Provides native TCP/IP connectivity
Flexible Time & Accumulation exporting √ √ √
• Each transmitter will have a unique number that will be • Connects to Expansion Head on SDC-550.
Extremely flexible event-based action mode on
Across all Local only Local only linked as a card holder
controllers
Multiple companies and departments √ √ √ • Connects to SDC-550 and SDC-520 on reader network
Mantrap (Booth) and turnstile operation supported √ √ √
16 powerful schedules per controller √ √ √
32 public holidays integrated into schedules √ √ √
Maximum number of doors supported √ √ √
Timed Anti-passback, Anti-passback and Zone Control √ √ √
SSI-301-W Wiegand to RS-485 SEB710 I/O
Converter Board Expansion Board
Card capture/drop-box function available √ √ √ Product Code: SFSSI300WO Product Code: SFSEB71000
Biometric reader integration √ √ √
Supports Personal Assistant Software SSS-120 √ √ √ • Converts Wiegand data into the RS-485 used by the • Extends the I/O capabilities of the SDC-550 Multiple
Supports Remote Client Software SSS-101 √ √ - SDC-550 Multiple Door Controller, the SDC-520 Door Controller
64 event controlled Counters or Timers per Controller √ - - Ethernet Controller and the SEB-720 remote I/O board • 8 x Relay outputs (configure as either powered or
Configurable extra data fields with automatic lists, • Small, space-saving board for unobtrusive installation potential-free contacts)
√ - -
dropdown lists, photographs or notes fields
behind a device, or within the controller cabinet • 8 x Programmable digital inputs
Tag-holder sequencing tasks (enforcing Time &
√ - -
Attendance clockings) • In-circuit programming for easy product updates • 8 x Multi-purpose I/O points
Site-based configuration and hardware filtering √ - -
• Rotary-coded address switch for easy addressing (set as either inputs or outputs)
Site-based configuration and hardware filtering √ - -
Graphical event and alert monitoring and control √ - - • Requires 12V DC power source
PC-based actions for controlling third party devices √ - -
Quick search filters, low bandwidth setting and on-the-
√ - -
fly configuration
Random search and tag holder counters for scripting √ - -

1. Personal Assistant Software SSS-120 is a visitor management, data capture

solution which is ideal for picture capturing, card design and biometric reader
take-on. Includes card printer capability - supports Windows drivers
2. Remote Client Software SSS-101 provides additional administrators full use of the
master software from remote computer terminals

Comprehensive
Access Control
www.CentSys.com System page 145
 SYSTEMs
ACCESS CONTROL
Biometric Components Virdi AC4000 RF Virdi AC5000 RF
Biometric Fingerprint Readers Biometric Reader Biometric Reader
Various kit combinations available - refer to Price List Product Code: VIRDAC4000 Product Code: VIRDAC5000

The Virdi AC4000 RF system offers an award-winning The Virdi AC5000 RF Fingerprint Reader incorporates
Adding a biometric reader significantly increases the security of any access control installation by providing a formidable biometric Fingerprint, PIN and RF/SC cards authentication. state-of-the-art design, elegant looks and a robust
identification system that is very difficult to circumvent. IP65-rated housing, designed to withstand any weather
New-generation technology, convenience and design with conditions.
Centurion Systems is a proud stockist of the award-winning Virdi range of biometric and general access control devices. LCD, LED and motion sensor technology.
It has a customisable colour LCD screen, with an LED touch
keypad (i.e. - plastic/rubber buttons which can wear out).
Virdi AC2100 Reader Virdi AC2100H RF Reader
Biometric Reader Biometric Reader
Product Code: VIRDA2100 Product Code: VIRDAC2500

The Virdi AC2100 is a practical and affordable fingerprint Virdi’s patented fingerprint authentication technology taken
reader with Fake Fingerprint Detection technology. to the next level with network compatibility and an even
larger user template capacity.

Main Features Main Features

• 22 000-user and 22 000 fingerprint template capacity • IP65-rated Outdoor Fingerprint Reader – use in any
environment
• Patented Virdi Fake Fingerprint Detection – can detect
fingerprints made from paper, silicone, wax, etc. • 20 000 user and 20 000 fingerprint template storage
capacity
• Fast authentication speed (1:1 < 0.5 seconds; 1:N
[1000] <1 seconds) • Patented Virdi Fake Fingerprint Detection – can detect
fingerprints made from silicone, wax, etc.
• Can operate in a standalone mode or on a TCP/IP
network, RS-232, RS-485, Wiegand • High-performance processor/CPU – fast operating and
processing speeds
Main Features Main Features • Interphone integration for Visitor Control with
enhanced security • Can operate in Standalone Mode or on a TCP/IP
• 100 user and 200 fingerprint template capacity • 1500 user and 1500 fingerprint template capacity network, RS-232, RS-485, Wiegand
• Access Control, Time & Attendance and Meal Control
• Patented Virdi Fake Fingerprint Detection – can detect • Patented Virdi Fake Fingerprint Detection – can detect • Built-in Smartcard/RF card module for added security
fingerprints made from paper, silicone, wax, etc. fingerprints made from paper, silicone, wax, etc and to facilitate 1:1 searches

• IPX3 rating – IPX is an international waterproofing • IPX3 rating – IPX is an international waterproofing • Auto-sensing – saving energy and reducing battery
standard; it can be installed in virtually any location standard; it can be installed in virtually any location usage during power failures

• Built-in Smartcard/RF card module for added security or to • High-performance processor – fast operating and
facilitate 1:1 searches processing speeds
• Auto-sensing – saving energy and reducing battery usage • Can operate in Standalone Mode or on a TCP/IP network,
during power failures RS485, Wiegand
• Voice prompting – easy operation for first time users • Built-in Smartcard/RF card module for added security or to
facilitate 1:1 searches
• High-performance processor
• Auto-sensing – saving energy and reducing battery usage
during power failures

Biometric
fingerprint
www.CentSys.com readers page 147
 SYSTEMs
ACCESS CONTROL
Virdi AC6000 High-End Virdi USB Enrolment Virdi ACF100
Biometric Reader
Product Code: VIRDAC6000
Device Biometric Reader
Product Code: VIRDACF100
Biometric Reader
Product Code: VIRDFOHO2
This state-of-the-art terminal embraces the latest technology The ACF100 is a robust access control terminal which is aesthetically pleasing and simple to install, configure and operate.
with a large, colour, touch-screen LCD, embedded digital It is not only designed for access control applications, but for time and attendance monitoring as well. The ACF100
Award-winning USB Fingerprint Reader with Live and Fake supports DDNS, which creates a secure link for each device to a central communication server. Simply put, this means that
camera and extremely fast processor.
Fingerprint Detection Technology incorporating an RFID an ACF100 installed at a site on an ADSL network in New York can be controlled by a Smartphone in London on a 3G
Reader. connection provided both devices are connected to the internet, without the need for a VPN (Virtual Private Network).

Main Features Main Features

• 100 000 user and 60 000 fingerprint template storage • 125KHz Proximity Card and Fingerprint Enrolment Support
capacity
• Detecting fake fingerprint materials such as paper, file,
• Patented Virdi Fake Fingerprint Detection – can detect silicon, rubber, etc.
fingerprints made from silicone, wax, etc.
• It is convenient to use as it does not require users to carry
• 4.8” colour TFT LCD touch screen – intuitive user interface special tools for verification
simplifies operation
• It is a high-tech fingerprint recognition system that Main Features
• Embedded 1.3 megapixel camera – takes a photo at the uses fingerprints which carry - risk of replication or
time of each transaction for added security unauthorised use
Mechanical Features • Lock control (relay) via RS485 – built into the power
• High quality sound • Uses 500DPI high-capacity fingerprint recognition sensors supply
• IP65 degree of protection
for fast and accurate verification
• Ultra-fast authentication speed (1:1 < 0.5 seconds, 1:N • Supports magnetic lock (EM), dead bolt and striker
• Die-cast aluminium housing
[7000] < 1 seconds) • Insert into PC’s USB terminal for easy recognition and
• Standalone option – device managed by Smartphone
installation • Sapphire crystal (hardened) fingerprint sensor
• USB memory slot for convenient configuration, firmware
• Network option – connects to UNIS via LAN (wireless);
upgrades, Database backups, user info, etc • Battery backup device is managed by Server/PC
• Optional face detection Electronic Features • Remote option – connects to DDNS server via internet-
• Fingerprint sensor with live and fake finger detection enabled LAN (wireless); device is controlled by
technology Smartphone

• Integrated card reader (either 125KHz RFID or 13.65MHz • Can be used for both access control and Time &
Attendance
Virdi Template Mifare)

Management Software • 1000 user, fingerprint template and card capacity • Wi-fi Direct-enabled – does not require a separate
wireless access point to connect to Smartphone
Biometric Software • 1 000 000 transaction memory
Product Code: VIRDUNISTD
• Embedded 1.3 megapixel camera

Sophisticated device and template management application

with powerful access control functionality and optional Time &
Attendance and Meal Management modules.

Main Features

• Multiple terminal management

• Client/Server environment
• TCP/IP communication
• ERP and Groupware System Interface
• Firmware upgrade functionality
• Database backup
• Multi-language support
Biometric
fingerprint
www.CentSys.com readers page 149