0% found this document useful (0 votes)
134 views20 pages

Grove GMK4100B: Product Guide

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
134 views20 pages

Grove GMK4100B: Product Guide

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

Grove GMK4100B

Product Guide

Features
• 11,0 m – 51 m (36 ft – 167 ft) six-section full power
MEGAFORMTM boom with TWIN-LOCKTM pinning

• 8,7 m – 15 m (29 ft – 49 ft) hydraulic offset


bi-fold swingaway

• 1 x 6 m (20 ft) intermediate lattice insert

• 19,3 t (42,500 lb) counterweight with hydraulic


removal system

• Mercedes-Benz OM 501 LA, 300 kW (402 bhp) at 1800 rpm,


max. torque 2000 Nm (1475 ft-lb) at 1300 rpm

• MEGATRAKTM independent hydro-pneumatic suspension


Features
TWIN-LOCK™
Boom pinning mechanism automatically pins the
sections in position using two horizontal pins.

CraneSTAR is an exclusive
and innovative crane asset
management system that helps
improve your profitability
and reduce costs by remotely
monitoring critical crane data.
Visit www.cranestar.com for
more information.

MEGATRAK™ EKS 5 Light


The MEGATRAK™ suspension system is the best off road driveline Monitoring the lifting
available on the market today. The system’s versatility and performance condition of the crane
allows the GMK4100B to operate as a true all-terrain crane. The at all times EKS works
MEGATRAK™ independent suspension and all-wheel steer system together with, but
allows wheels to remain on the ground at all times so stresses and independently of the
weight are not continually transferred between axles. MEGATRAK™ ECOS as a complete
provides true ground clearance where others just raise the chassis. command and control
Other benefits of the MEGATRAK™ system are: system or separately as a
• A reliable suspension system load moment indicator.
• Excellent job site maneuverability with all-wheel steering
• Commonality among almost all models
• A driveline that remains aligned at all times
• A steering linkage system that is protected against damage
• Constant tire contact for equal tire wear ECOS
• Reduced maintenance Electronic Crane Operating System -
ECOS enables control of the entire crane's
principle operations. Simple programming
eases lift planning and a supply of essential
information allows full concentration on
the lift itself.
Contents

Specifications 4

Dimensions 7

Weights 8

Counterweight 9

Working range (Main boom) 10

Load charts (Main boom) 11

Working range (Swingaway and extension) 13

Load charts (Swingaway and extension) 14

Working range (Heavy duty jib) 16

Load charts (Heavy duty jib) 17

Symbols glossary 18
Specifications

Superstructure
Cab

Boom All aluminum constructed cab with acoustical lining,


hydraulic tilted to 20°. Includes tinted safety glass, adjustable
11,0 m – 51 m (36 ft – 167 ft) six section, full power operator’s seat, opening windows at side and rear, hinged
MEGAFORM™ boom with TWIN-LOCK™ pinning. windshield with wiper, sun visor and window shade. Other
Maximum tip height: 54 m (177 ft). features include diesel heater/defroster, armrest integrated
crane controls, drive/steer controls and ergonomically
arranged instrumentation.
Boom nose

Crane control system


Six nylatron sheaves, mounted on heavy-duty tapered roller
bearings with removable pin-type rope guards. Quick reeve
boom nose. Removable auxiliary boom nose with removable Full electronic control of crane functions using control levers
pin type rope guard. with automatic reset to zero. Integrated with the LMI and
engine management systems by CAN-BUS. ECOS system
with graphic display.
Boom elevation
Swing
Single lift cylinder with safety valve provides boom angle
from ‑3° to +82°.
Two axial piston planetary gear boxes with fixed displacement
motors. Infinitely variable to 1.8 rpm. Free swing with
Hydraulic offsettable lattice extension holding (rocker switch) and service (foot pedal) brake.

8,7 m – 15 m (29 ft – 49 ft) bi-fold lattice swingaway Counterweight


extension, hydraulically offsettable and luffing under load
from 0° - 40°. 19,3 t (42,500 lb) consisting of various sections with
Maximum tip height: 69 m (226 ft). hydraulic installation/removal system controlled from the
superstructure cab.
*Offsettable lattice extension
Hydraulic system
8,7 m – 15 m (29 ft – 49 ft) bi-fold lattice swingaway
extension, manually offsettable at 0˚, 20˚ and 40˚. 2 separate circuits, 1 axial piston variable displacement pump
Maximum tip height: 69 m (226 ft). (load sensing) with electronic power limiting control and 1
gear pump for swing. Thermostatically controlled oil coolers
*Lattice extensions keep oil at optimum operating temperature.
Tank capacity: 680 L (180 gal).
(1) 6 m (20 ft) insert for use with lattice swingaway extension
to increase length to 21 m (69 ft). Hoist
Maximum tip height: 75 m (246 ft).
Main and auxiliary hoist are powered by axial piston
Load moment and anti-two motor with planetary gear and brake. “Thumb-
block system thumper” hoist drum rotation indicator alerts operator
of hoist movement.
Load moment and anti-two block system with audio/visual Main Auxiliary
warning and control lever lockout provides electronic display
of boom angle, length, radius, tip height, relative load Line length: 220 m 220 m
(720 ft) (720 ft)
moment, maximum permissible load, load indication and
warning of impending two-block condition. Rope diameter: 16 mm 16 mm
Line speed: 125 m/min 125 m/min
(410 fpm) (410 fpm)
Line pull: 50 kN 50 kN
(11,240 lb) (11,240 lb)

4 *Denotes optional equipment


Specifications

Superstructure continued Carrier

*Optional hookblocks Chassis

Lifting
Sheaves Weight
Parts of Possible load Box-type, torsion resistant frame is fabricated from
capacity line with the crane* high-strength steel.
80 t 800 kg 58 t/74 t▪
7
(88 USt) (1770 lb) 2-▪15 (63.9 USt/81.6 USt▪) Outrigger system
63 t 650 kg 54 t
5
(69 USt) (1430 lb) 2-11 (59.5 USt) Four hydraulic single-stage outrigger beams with
40 t
3
450 kg 35 t vertical cylinders and outrigger pads 500 mm (19.7 in)
(44 USt) (1000 lb) 1-7 (35.6 USt) square. Outriggers can be set in four positions:
16 t 300 kg 15 t Full 7 m (23 ft)
1
(18 USt) (660 lb) 1-3 (16.5 USt)
Partial 6 m (19.7 ft)
8t 200 kg 5t
H/B Partial 5 m (16.4 ft)
(9 USt) (440 lb) 1 (5.5 USt)
Retracted 2,3 m (7.6 ft)
Independent horizontal and vertical movement

Requires additional boom nose sheave controlled from each side of carrier and the
*Varies depending on national regulations superstructure cab. Electronic crane level indicators.
Includes outrigger monitoring system.

*Optional equipment Engine

Work lights, mounted on boom base section Mercedes-Benz OM 501 LA, 6-cylinder, water cooled,
Boom mounted aircraft warning light turbo-charged, with 300 kW (402 bhp) at 1800 rpm.
Radio/CD player for superstructure cab
Air-conditioning Max. Torque 2000 Nm (1475 ftlb) at 1300 rpm.
Hook blocks/headache ball Compression and exhaust brakes.
Additional strobe light Engine emissions: EUROMOT/EPA/CARB Tier 4i
Data logger (non-road)
EKS 5 with graphic display in lieu of EKS 5 Light
Turntable mounted toolbox
360° positive swing lock (NYC requirement) Fuel tank capacity
Working range limiter
400 L (106 gal).

Transmission

ZF AS Tronic, 12 speeds forward, 2 reverse. 2 speed


transfer case.

Drive/steer

8x6x8

Grove GMK4100B *Denotes optional equipment 5


Specifications

Carrier continued
Electrical system

Axles 24 V system with three-phase alternator 28 V/100A,


2 batteries 12 V/170 Ah.
1st axle line - drive/steer
2nd axle line - steer (optional drive)
Maximum speed
3rd axle line - drive/steer (connects for all-wheel steer)
4th axle line - drive/steer 85 km/h (53 mph).
Drive axles with planetary hub reduction and center
mounted gearing. Inter-axle and cross axle differential locks.
Gradeability (theoretical)

Suspension 70% with 14.00 tires.


63% with 16.00/20.5 tires.
Grove’s exclusive MEGATRAK™ suspension.
Independent hydro-pneumatic system acting on all
wheels with hydraulic lockout. Suspension can be Miscellaneous standard equipment
raised 170 mm (6.7 in) or lowered 130 mm (5.1 in)
both longitudinally and transversely. Features an Work lights; tool kit; fire extinguishers; auxiliary
automatic leveling system for highway travel. boom nose; radio/CD player in carrier cab, heated rear
view mirrors, wind speed indicator, CraneSTAR asset
management system.
Tires

8 tires, 385/95 R25 (16.00 R25) *Optional equipment


(Vehicle width – 2,75 m [9.0 ft])
Stainless steel exhaust system with spark arrestor
Air-conditioning - combined system
Steering 385/95 R25 tires (14.00 R25)
(vehicle width 2,55 m [8.4 ft])
Dual circuit, hydraulic power assisted steering 525/80 R25 tires (20.5R25) tires
system. Transfer case mounted, ground driven (vehicle width 2,88 m [9.5 ft])
emergency steering pump. Axles 1, 2, and 4 steer on 8x8x8 drive/steer
highway. Separate steering of the 3rd and 4th axles
Electric driveline retarder
for all wheel steer and crab-steering, controlled by an
electronic rocker switch. Engine-independent diesel cab heater, with engine
pre-heater
Timer for diesel heater
Brakes Strobe light
Spare tire and wheel with carry bracket
Service brakes: pneumatic dual circuit acting on all Rear mounted stowage box
wheels. Standard anti-lock brake system (ABS).
Outrigger pad load indicator
Parking brake: pneumatically operated spring loaded Tool box
brake acting on axle lines 2 and 4. Engine shut down valve
Air dryer. Tiltable carrier cab
Optional engine: Tier III Mercedes-Benz OM
Cab 501 LA 290 kW (389 bhp) at 1800 rpm. Max.
torque 1850 at 1300 rpm (non-road)
Two-man, aluminum construction includes the
following features: safety glass; driver seat with
pneumatic suspension, passenger seat, engine-dependent
hot water heater, complete instrumentation and driving
controls.

6 *Denotes optional equipment


Dimensions
12 530 mm
(41.1') (42.1' with auxiliary hoist)

3525 mm (11.6')

3160 mm (10.4')
11 000 mm
(36.1')

(*)
19°

21°
*14.00 tires - 3845 mm (12.6')
425 mm 16.00/20.5 - 3901 mm (12.8')
(1.4 ft)
1812 mm 1770 mm 1250 mm 1650 mm 2100 mm 1650 mm 1450 mm 438 mm
(5.9') (5.8') (4.1') (5.4') (6.9') (5.4 ft) (4.8') (1.4')

10 308 mm (33.8')

12 120 mm (39.8')

8100 mm (26.6')

5570 mm (18.3') 2530 mm (8.3')


R
10

(26 mm
Ra

R
(24.0 mm
56

Ra 11
96

5m m

13
Ra 73 .9')

10 5
')
0
82

m
25
m ( 31

R 820

19
m

7m m
( 3 .8')

m (36
4.
7')

(3 .5')
3.
5')
7000 mm (23.0')
5000 mm (16.4')
6000 mm (19.7')
2540 mm (8.3')
*

R
Ra 9925
89 m
00 m R3
mm (32. 525
(29 6')
mm 15.7')

mm
')
(11.8

.2' (11.
) 6')
(
Ra 3 775 mm

*14.00 tires - 2540 mm (8.3')


16.00 tires - 2750 mm (9.0')
600

20.5 tires - 2880 mm (9.4')


R4

2820 mm (9.3')

Grove GMK4100B 7
Weights

Trailing boom

16 154 mm
(53')
9357 mm (30.7')

4832 mm 1650 mm 2100 mm 1650 mm 1888 mm 4968 mm 1372 mm


(9.9') (5.4') (6.9') (5.4') (6.2') (16.3') (4.5')

Basic Weights - kg (lb) Axles 1 and 2 Axles 3 and 4 Dolly Total


Mercedes-Benz Tier 4i power, 16.00 tires, 8x6x8 drive/steer,
outrigger pads stowed, auxiliary hoist, 49 ft swingaway stowed,
additional oil cooler, 1300 kg (2866 lb) counterweight slab bolted to 23 098 (50,922) 12 670 (27,933) 9759 (21,515) 45 571 (100,467
superstructure and 2500 kg (5511 lb) counterweight slab clamped to
the superstructure and 6000 lb dolly.
Additions:
14.00R25 tires -240 (-529) -240 (-529) – – -480 (-1058)
20.5R25 tires 168 (370) 168 (370) – – 336 (740)
8x8x8 drive/steer 265 (584) 75 (165) – – 340 (750)
Counterweight in place of auxiliary hoist -154 (-340) 62 (137) – – -92 (-203)
Removals:
Hydraulic hose reel 2 (4) 0 (0) -62 (-137) -60 (-132)
Brackets for swingaway -10 (-22) -5 (-11) -50 (-110) -65 (-143)
12 m – 21 m (29.5 ft – 49 ft) swingaway -183 (-403) -81 (-179) -621 (-1369) -885 (-1951)
Front and rear outrigger floats -66 (-146) -74 (-163) – – -140 (-309)
2500 kg (5511 lb) counterweight slab -2245 (-4949) -255 (-562) – – -2500 (-5511)
Weight effect:
Telescope section 1 extended 1 ft -165 (-364) -73 (-161) 238 (525) – –

Boom over front


Basic Weights - kg (lb) Axles 1 and 2 Axles 3 and 4 Total
Mercedes-Benz Tier 4i power, 28.5 ft – 49.2 ft hydraulic offset
swingaway including brackets and hose reel, 16.00R25 tires, 8x6x8
drive/steer, 2nd oil cooler, outrigger pads, auxiliary hoist, 1300 kg 22 277 (49,112) 20 543 (45,287) 42 820 (94,401)
(2866 lb) counterweight bolted and 2500 kg (5511 lb) counterweight
clamped to superstructure, driver and tanks filled.
Additions:
8x8x8 drive/steer 265 (585) 75 (165) 340 (750)
Electric driveline retarder -33 (-73) 293 (646) 260 (573)
Spare wheel 14.00 R25 XGC steel rim with stowage -205 (-452) 470 (1036) 265 (584)
Spare wheel 16.00 R25 XGC steel rim with stowage -254 (-559) 579 (1275) 325 (716)
Spare wheel 20.5 R25 XGC steel rim with stowage -291 (-641) 658 (1450) 367 (809)
2500 kg (5511 lb) counterweight slab clamped to superstructure -1657 (-3653) 4077 (8989) 2420 (5335)
5000 kg (11,023 lb) counterweight slab clamped to superstructure -3328 (-7337) 8188 (80,052) 4860 (10,714)
2500 kg (5511 lb) counterweight slab on carrier deck (base plate) 2281 (5029) 259 (570) 2540 (5600)
5000 kg (11,023 lb) counterweight slab on carrier deck 4365 (9623) 495 (1091) 4860 (10,714)
Substitutions:
14.00R25 tires -265 (-584) -265 (-584) -530 (-1168)
20.5R25 tires 168 (370) 168 (370) 36 (741)
Removals:
Brackets for hydraulic swingaway -93 (-206) 28 (63) -65 (-143)
Hose reel for hydraulic swingaway -125 (-275) 65 (143) -60 (-132)
10 m – 17 m (33 ft – 56 ft) hydraulic swingaway -1245 (-2744) 360 (793) -885 (-1951)
Auxiliary boom nose -142 (-314) 82 (182) -60 (-132)
Outrigger floats front -109 (-240) 39 (85) -70 (-154)
Outrigger floats rear 42 (94) -112 (-248) -70 (-154)

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
8 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Counterweight

500 kg
(1100 lb) 1

1300 kg
(2866 lb) 2
2500 kg
(5512 lb) 3
1198 mm
(3.9')
5000 kg
(11,023 lb) 4

2500 kg
(5512 lb) 5
2600 mm (8.5')

3535 mm (11.6')

1190 mm
(3.9')

2530 mm
(8.3')

Counterweight configurations
kg (lb) 1 2 3 4 5
1800 (3900) x x
4300 (9400) x x x
6800 (14,900) x x x x
9300 (20,500) x x x x
11 800 (26,000) x x x x x
14 300 (31,500) x x 2x x
16 800 (37,000) x x x 2x x
19 300 (42,500) x x 2x 2x x

Grove GMK4100B 9
Working range

36 ft – 167 ft main boom

180 167.3'

154.9'

160
142.1'

128.8'
140

115.3'

120
101.7'
Height from the ground in feet

89.3'
100

76.4'

80
63.2'

49.7'
60

36.1'

40

20
82 o

0
160 140 120 100 80 60 40 20 0

Operating radius in feet from axis of rotation R [ft]

Hook block H
80 USt, 7 sheave quick-reeving 3200 mm (10.5 ft)
55 USt, 5 sheave quick-reeving 3000 mm (9.8 ft)
35 USt, 3 sheave quick-reeving 2900 mm (9.5 ft)
15 USt, 1 sheave quick-reeving 2800 mm (9.2 ft)
6 USt, 7 single headache ball 2350 mm (7.7 ft)

Tip heights shown in the working range diagram do not consider loaded boom deflection.

10
Load charts
Main boom

Boom Counterweight Outriggers Rotation

11,0 m – 51 m 19 300 kg 26.6 ft x 23.0 ft 360˚


(36 ft – 167 ft) (42,500 lb) (100%)

Boom
Radius Pounds x 1000
Boom Extension

Feet 36.1 49.7 63.2 76.4 89.3 101.7 115.3 128.8 142.1 154.9 167.3

8 * 200.0
10 154.0 132.0 123.0 109.0
15 114.0 109.0 102.0 95.0 80.0
20 92.0 90.0 87.0 81.0 76.0 61.0 45.0
25 71.0 73.0 73.0 67.0 66.0 58.0 45.0 33.8
30 59.0 56.0 56.0 52.0 51.0 41.8 33.8 25.4 19.6
35 47.0 48.0 45.0 45.0 42.2 37.8 33.0 25.4 19.6 15.8
40 38.8 38.0 38.0 35.6 33.4 30.4 25.4 19.6 15.8
45 32.4 32.6 32.6 30.4 28.6 27.6 25.4 19.6 15.8
50 27.4 28.8 28.4 26.4 25.2 23.8 23.6 19.6 15.8
55 24.8 24.4 23.0 23.6 20.8 20.6 19.4 15.8
60 21.6 21.4 20.4 20.8 18.2 18.2 18.2 15.8
65 19.2 18.8 19.0 18.6 16.6 16.0 16.2 15.6
70 16.6 17.4 16.6 15.6 14.6 14.4 14.8
75 14.6 15.6 14.6 14.8 13.6 13.4 13.2
80 14.0 13.0 13.4 12.8 12.4 11.8
85 12.4 11.6 12.0 12.0 11.4 10.8
90 9.4 10.4 10.8 10.8 10.6 9.6
95 9.2 9.8 9.8 9.6 8.8
100 8.4 9.0 8.8 8.6 7.8
105 8.4 8.0 7.8 7.0
110 7.8 7.4 7.0 6.4
115 4.2 6.8 6.2 5.6
120 6.0 5.6 5.0
125 3.4 5.0 4.4
130 2.8 4.4 3.8
135 4.0 3.4
140 2.8
145 2.4
150 2.0
* 0° over rear with special equipment
Loads above 130,000 lb require additional equipment

Boom Counterweight Outriggers Rotation

11,0 m – 51 m 16 800 kg 26.6 ft x 23.0 ft 360˚


(36 ft – 167 ft) (37,000 lb) (100%)

Boom
Radius Pounds x 1000
Boom Extension

Feet 36.1 49.7 63.2 76.4 89.3 101.7 115.3 128.8 142.1 154.9 167.3

10 154.0 132.0 123.0 109.0


15 114.0 109.0 102.0 95.0 80.0
20 92.0 90.0 87.0 81.0 76.0 61.0 45.0
25 71.0 72.0 68.0 65.0 62.0 58.0 45.0 33.8
30 57.0 54.0 52.0 51.0 48.0 41.8 33.8 25.4 19.6
35 44.0 45.0 42.6 42.4 39.6 37.2 33.0 25.4 19.6 15.8
40 36.4 36.0 35.6 33.2 31.2 30.0 25.4 19.6 15.8
45 30.2 31.6 30.6 28.4 27.0 25.6 25.2 19.6 15.8
50 25.6 26.8 26.4 24.4 25.0 22.0 21.8 19.6 15.8
55 23.2 22.8 21.4 21.8 19.2 19.0 19.2 15.8
60 20.2 19.8 20.2 19.4 17.6 16.6 16.8 15.8
65 17.8 17.4 18.2 17.2 16.6 15.6 15.4 15.2
70 15.2 16.2 15.2 15.4 14.6 14.4 13.4
75 13.4 14.4 13.4 13.8 13.6 13.0 12.0
80 12.8 12.0 12.4 12.2 11.8 10.8
85 11.4 10.6 11.0 11.0 10.6 9.6
90 8.6 9.4 10.2 10.0 9.6 8.6
95 8.4 9.4 9.0 8.6 7.8
100 7.4 8.6 8.2 7.8 7.0
105 7.8 7.4 7.0 6.2
110 7.2 6.6 6.2 5.6
115 3.4 6.0 5.6 4.8
120 5.4 4.8 4.2
125 2.6 4.4 3.6
130 2.2 3.8 3.2
135 3.4 2.6
140 2.2
145 1.8
Loads above 130,000 lb require additional equipment
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GMK4100B The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 11
Load charts
Main boom

Boom Counterweight Outriggers Rotation

11,0 m – 51 m 9300 kg 26.6 ft x 23.0 ft 360˚


(36 ft – 167 ft) (20,500 lb) (100%)

Boom
Radius Pounds x 1000
Boom Extension

Feet 36.1 49.7 63.2 76.4 89.3 101.7 115.3 128.8 142.1 154.9 167.3

10 154.0 132.0 123.0 109.0


15 114.0 109.0 102.0 95.0 80.0
20 85.0 80.0 74.0 67.0 65.0 61.0 45.0
25 60.0 58.0 56.0 53.0 52.0 48.0 44.0 33.8
30 45.0 43.6 43.2 40.8 37.6 35.0 33.4 25.4 19.6
35 34.6 36.6 35.2 33.2 30.8 30.8 27.4 25.4 19.6 15.8
40 29.6 29.4 27.6 27.2 25.8 23.6 22.4 19.6 15.8
45 24.4 24.8 23.4 23.8 22.0 21.8 20.4 19.0 15.8
50 20.6 20.8 20.2 20.6 19.0 18.8 18.6 17.6 15.8
55 17.8 17.4 18.0 16.4 16.8 16.4 15.4 14.2
60 15.8 14.8 15.8 14.4 15.2 14.4 13.4 12.4
65 14.0 12.8 13.6 13.2 13.6 12.8 11.8 10.8
70 11.0 12.0 12.2 12.0 11.2 10.4 9.4
75 9.6 10.4 11.0 10.8 10.0 9.2 8.2
80 9.6 9.8 9.6 9.0 8.2 7.2
85 8.8 8.6 8.4 8.0 7.2 6.2
90 5.2 7.6 7.4 7.0 6.4 5.4
95 6.8 6.6 6.2 5.6 4.6
100 4.6 5.8 5.4 4.8 4.0
105 5.2 4.6 4.2 3.4
110 4.4 4.0 3.6 2.8
115 3.4 3.0 2.2
120 3.0 2.4 1.8
125 2.0
Loads above 130,000 lb require additional equipment

Boom Counterweight Outriggers Rotation

11,0 m – 51 m 1800 kg 26.6 ft x 23.0 ft 360˚


(36 ft – 167 ft) (3900 lb) (100%)

Boom
Radius Pounds x 1000
Boom Extension

Feet 36.1 49.7 63.2 76.4 89.3 101.7 115.3 128.8 142.1 154.9 167.3

10 154.0 132.0 123.0 109.0


15 108.0 98.0 87.0 77.0 72.0
20 65.0 60.0 58.0 56.0 52.0 47.0 43.4
25 44.0 44.0 44.0 41.8 38.8 35.4 32.6 30.8
30 34.0 33.8 32.2 30.2 30.2 27.6 27.0 23.4 19.6
35 25.8 27.0 26.0 24.2 24.4 22.6 23.0 21.2 18.4 15.8
40 21.6 21.8 19.6 20.0 20.0 19.0 17.8 16.4 15.0
45 17.4 18.6 16.0 17.0 16.8 15.8 14.8 13.6 12.4
50 14.2 15.4 13.8 15.0 14.2 13.4 12.4 11.4 10.2
55 12.8 12.4 12.8 12.0 11.4 10.6 9.6 8.4
60 10.6 11.0 11.0 10.4 9.8 9.0 8.0 7.0
65 9.0 9.2 9.6 9.0 8.4 7.6 6.8 5.8
70 7.8 8.0 7.8 7.2 6.4 5.6 4.6
75 6.6 6.8 6.6 6.2 5.4 4.8 3.8
80 5.8 5.6 5.2 4.6 3.8 3.0
85 5.0 4.8 4.6 3.8 3.2 2.2
90 4.0 3.8 3.2 2.6
95 3.4 3.0 2.6 2.0
100 2.6 2.0
105 2.0
Loads above 130,000 lb require additional equipment

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
12 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Working range

167.3 ft main boom with hydraulic luffing 28.5 ft and 49.2 ft swingaway and 1 x 19.7 ft insert


20°

+68.9'
240
40°

+49.2'
220

+28.5'
200

180 167.3'

160
Height from the ground in feet

140

120

100

80

60

40

20
°
82

180 160 140 120 100 80 60 40 20 0

Operating radius in feet from axis of rotation R [ft]

Tip heights shown in the working range diagram do not consider loaded boom deflection.

Grove GMK4100B 13
Load charts
Hydraulic offsettable swingaway

Intermediate angle
Boom Extension Counterweight Outriggers Rotation

51 m 8,7-15-21 m 19 300 kg 26.6 ft x 23.0 ft 360˚


(167 ft) (29-49-69 ft) (42,500 lb) (100%) 100%
Hydraulic luffing
Boom
Radius Pounds x 1000
Boom Extension

Feet 167.3 ft + 28.5 ft 167.3 ft + 49.2 ft 167.3 ft + 68.9 ft


0° 0°-20° 20°-40° 0° 0°-20° 20°-40° 0° 0°-20° 20°-40°

35 8.6 5.0
40 8.6 8.6 5.0 4.2
45 8.6 8.6 5.0 4.2
50 8.6 8.6 7.4 5.0 4.2
55 8.6 8.4 7.4 5.0 5.0 4.2
60 8.6 8.4 7.2 5.0 4.8 4.2 4.2
65 8.6 8.2 7.2 5.0 4.6 4.2 4.2
70 8.6 8.0 7.0 5.0 4.6 3.8 4.2 4.2
75 8.6 7.8 7.0 5.0 4.4 3.8 4.2 4.2 3.6
80 8.6 7.8 7.0 5.0 4.4 3.6 4.2 4.2 3.6
85 8.6 7.6 6.8 5.0 4.2 3.6 4.2 4.2 3.6
90 8.6 7.4 6.8 5.0 4.2 3.6 4.2 4.0 3.6
95 8.4 7.4 6.8 5.0 4.0 3.6 4.2 4.0 3.4
100 7.6 7.2 6.8 5.0 4.0 3.4 4.2 4.0 3.4
105 6.8 6.8 6.8 4.8 3.8 3.4 4.2 3.8 3.4
110 6.0 6.0 6.6 4.6 3.8 3.4 4.2 3.8 3.4
115 5.4 5.4 5.8 4.6 3.8 3.4 4.2 3.8 3.4
120 4.8 4.8 5.2 4.4 3.6 3.4 4.2 3.6 3.4
125 4.4 4.4 4.6 4.4 3.6 3.4 4.2 3.6 3.4
130 3.8 3.8 4.2 4.2 3.6 3.4 4.2 3.6 3.4
135 3.4 3.4 3.6 3.8 3.6 3.4 3.8 3.6 3.2
140 2.8 2.8 3.4 3.4 3.4 3.2 3.2 3.2
145 2.4 2.4 3.0 3.0 3.4 3.0 3.0 3.2
150 2.0 2.0 2.6 2.6 3.2 2.6 2.6 3.0
155 1.6 1.6 2.2 2.2 2.8 2.2 2.2 2.6
160 1.4 1.4 1.8 1.8 1.8 1.8 2.4
165 1.6 1.6 1.6 1.6 2.0
170 1.6
Intermediate angle
Boom Extension Counterweight Outriggers Rotation

51 m 8,7-15-21 m 16 800 kg 26.6 ft x 23.0 ft 360˚


(167 ft) (29-49-69 ft) (37,000 lb) (100%) 100%
Hydraulic luffing
Boom
Radius Pounds x 1000
Boom Extension

Feet 167.3 ft + 28.5 ft 167.3 ft + 49.2 ft 167.3 ft + 68.9 ft


0° 0°-20° 20°-40° 0° 0°-20° 20°-40° 0° 0°-20° 20°-40°

35 8.6 5.0
40 8.6 8.6 5.0 4.2
45 8.6 8.6 5.0 4.2
50 8.6 8.6 7.4 5.0 4.2
55 8.6 8.4 7.4 5.0 5.0 4.2
60 8.6 8.4 7.2 5.0 4.8 4.2 4.2
65 8.6 8.2 7.2 5.0 4.6 4.2 4.2
70 8.6 8.0 7.0 5.0 4.6 3.8 4.2 4.2
75 8.6 7.8 7.0 5.0 4.4 3.8 4.2 4.2 3.6
80 8.6 7.8 7.0 5.0 4.4 3.6 4.2 4.2 3.6
85 8.6 7.6 6.8 5.0 4.2 3.6 4.2 4.2 3.6
90 8.2 7.4 6.8 5.0 4.2 3.6 4.2 4.0 3.6
95 7.4 7.4 6.8 5.0 4.0 3.6 4.2 4.0 3.4
100 6.6 6.6 6.8 5.0 4.0 3.4 4.2 4.0 3.4
105 6.0 6.0 6.4 4.8 3.8 3.4 4.2 3.8 3.4
110 5.2 5.2 5.8 4.6 3.8 3.4 4.2 3.8 3.4
115 4.6 4.6 5.0 4.6 3.8 3.4 4.2 3.8 3.4
120 4.2 4.2 4.6 4.4 3.6 3.4 4.2 3.6 3.4
125 3.6 3.6 4.0 4.0 3.6 3.4 4.0 3.6 3.4
130 3.2 3.2 3.4 3.6 3.6 3.4 3.4 3.4 3.4
135 2.6 2.6 3.0 3.2 3.2 3.4 3.0 3.0 3.2
140 2.2 2.2 2.8 2.8 3.4 2.6 2.6 3.2
145 1.8 1.8 2.4 2.4 3.0 2.2 2.2 2.8
150 1.4 1.4 2.0 2.0 2.6 2.0 2.0 2.4
155 1.6 1.6 2.2 1.6 1.6 2.2
160 1.4 1.4 1.4 1.4 1.8
165 1.4
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
14 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts
Manual offsettable swingaway

Fixed angle
Boom Extension Counterweight Outriggers Rotation

51 m 8,7-15-21 m 19 300 kg 26.6 ft x 23.0 ft 360˚


(167 ft) (29-49-69 ft) (42,500 lb) (100%) 100%

Boom
Radius Pounds x 1000
Boom Extension

Feet 167.3 ft + 28.5 ft 167.3 ft + 49.2 ft 167.3 ft + 68.9 ft


0° 20° 40° 0° 20° 40° 0° 20° 40°

35 8.6 5.0
40 8.6 8.6 5.0 4.2
45 8.6 8.6 5.0 4.2
50 8.6 8.6 7.4 5.0 4.2
55 8.6 8.4 7.4 5.0 5.0 4.2
60 8.6 8.4 7.2 5.0 4.8 4.2 4.2
65 8.6 8.2 7.2 5.0 4.6 4.2 4.2
70 8.6 8.0 7.0 5.0 4.6 3.8 4.2 4.2
75 8.6 7.8 7.0 5.0 4.4 3.8 4.2 4.2 3.6
80 8.6 7.8 7.0 5.0 4.4 3.6 4.2 4.2 3.6
85 8.6 7.6 6.8 5.0 4.2 3.6 4.2 4.2 3.6
90 8.6 7.4 6.8 5.0 4.2 3.6 4.2 4.0 3.6
95 8.4 7.4 6.8 5.0 4.0 3.6 4.2 4.0 3.4
100 7.6 7.2 6.8 5.0 4.0 3.4 4.2 4.0 3.4
105 6.8 7.2 6.8 4.8 3.8 3.4 4.2 3.8 3.4
110 6.0 6.6 6.8 4.6 3.8 3.4 4.2 3.8 3.4
115 5.4 5.8 6.2 4.6 3.8 3.4 4.2 3.8 3.4
120 4.8 5.2 5.4 4.4 3.6 3.4 4.2 3.6 3.4
125 4.4 4.6 4.8 4.4 3.6 3.4 4.2 3.6 3.4
130 3.8 4.2 4.4 4.2 3.6 3.4 4.2 3.6 3.4
135 3.4 3.6 3.8 3.8 3.6 3.4 3.8 3.6 3.2
140 2.8 3.2 3.4 3.4 3.4 3.2 3.4 3.2
145 2.4 2.6 3.0 3.4 3.4 3.0 3.4 3.2
150 2.0 2.2 2.6 3.2 3.4 2.6 3.0 3.2
155 1.6 1.8 2.2 2.8 3.0 2.2 2.6 3.0
160 1.4 1.4 1.8 2.4 1.8 2.4 2.6
165 1.6 2.0 1.6 2.0 2.2
170 1.6 1.6 1.8
175 1.4

Fixed angle

Boom Extension Counterweight Outriggers Rotation

51 m 8,7-15-21 m 16 800 kg 26.6 ft x 23.0 ft 360˚


(167 ft) (29-49-69 ft) (37,000 lb) (100%) 100%

Boom
Radius Pounds x 1000
Boom Extension

Feet 167.3 ft + 28.5 ft 167.3 ft + 49.2 ft 167.3 ft + 68.9 ft


0° 20° 40° 0° 20° 40° 0° 20° 40°

35 8.6 5.0
40 8.6 8.6 5.0 4.2
45 8.6 8.6 5.0 4.2
50 8.6 8.6 7.4 5.0 4.2
55 8.6 8.4 7.4 5.0 5.0 4.2
60 8.6 8.4 7.2 5.0 4.8 4.2 4.2
65 8.6 8.2 7.2 5.0 4.6 4.2 4.2
70 8.6 8.0 7.0 5.0 4.6 3.8 4.2 4.2
75 8.6 7.8 7.0 5.0 4.4 3.8 4.2 4.2 3.6
80 8.6 7.8 7.0 5.0 4.4 3.6 4.2 4.2 3.6
85 8.6 7.6 6.8 5.0 4.2 3.6 4.2 4.2 3.6
90 8.2 7.4 6.8 5.0 4.2 3.6 4.2 4.0 3.6
95 7.4 7.4 6.8 5.0 4.0 3.6 4.2 4.0 3.4
100 6.6 7.2 6.8 5.0 4.0 3.4 4.2 4.0 3.4
105 6.0 6.4 6.8 4.8 3.8 3.4 4.2 3.8 3.4
110 5.2 5.8 6.0 4.6 3.8 3.4 4.2 3.8 3.4
115 4.6 5.0 5.4 4.6 3.8 3.4 4.2 3.8 3.4
120 4.2 4.6 4.8 4.4 3.6 3.4 4.2 3.6 3.4
125 3.6 4.0 4.2 4.0 3.6 3.4 4.0 3.6 3.4
130 3.2 3.4 3.6 3.6 3.6 3.4 3.4 3.6 3.4
135 2.6 3.0 3.2 3.2 3.6 3.4 3.0 3.6 3.2
140 2.2 2.6 2.8 3.4 3.4 2.6 3.2 3.2
145 1.8 2.0 2.4 3.0 3.2 2.2 2.8 3.2
150 1.4 1.6 2.0 2.6 2.8 2.0 2.4 2.8
155 1.4 1.6 2.2 2.4 1.6 2.2 2.4
160 1.4 1.8 1.4 1.8 2.0
165 1.4 1.4 1.8
170 1.4

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove GMK4100B The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane 15
Working range

36 ft – 167 ft main boom with 6.6 ft heavy duty jib

180 167.3'

+ 6.6'
154.9'

160

142.1'

128.8'
140

115.3'

160

101.7'
Height from the ground in feet

100 88.1'

74.6'

80
62.8'

48.9'
60

36.1'

40

20
°
82

140 120 100 80 60 40 20 0

Operating radius in feet from axis of rotation R [ft]

Tip heights shown in the working range diagram do not consider loaded boom deflection.

16
Load charts
Heavy duty jib

Fixed angle
Boom Extension Counterweight Outriggers Rotation

11,0 m - 51 m 2 m 19 300 kg 26.6 ft x 23.0 ft 360˚


(36 ft - 167 ft) (6.6 ft) (42,500 lb) (100%) 100%

Boom
Radius Pounds x 1000
Boom Extension

Feet 36.1 ft + 6.6 ft 74.6 ft + 6.6 ft 128.8 ft + 6.6 ft 167.3 ft + 6.6 ft


0° 40° 0° 40° 0° 40° 0° 40°

10 22.0
15 22.0 22.0 22.0
20 22.0 22.0 22.0
25 22.0 22.0 22.0 22.0
30 22.0 22.0 22.0 22.0 12.2
35 22.0 22.0 22.0 12.2
40 22.0 22.0 22.0 12.2
45 22.0 22.0 22.0 12.2
50 22.0 22.0 22.0 12.2
55 22.0 22.0 20.6 21.0 12.2
60 22.0 18.0 18.6 12.2
65 19.4 16.0 16.4 12.2
70 14.0 14.4 12.2
75 12.4 12.8 12.8 12.2
80 11.2 11.4 11.4 11.8
85 10.4 10.4 10.2 10.6
90 9.6 9.6 9.2 9.6
95 8.8 8.8 8.4 8.6
100 8.4 8.4 7.4 7.6
105 7.8 6.8 7.0
110 7.4 6.0 6.2
115 7.0 5.4 5.4
120 4.6 4.8
125 4.0 4.2
130 3.6 3.6
135 3.0 3.2
140 2.6
145 2.2
150 1.8
155 1.4
160

Fixed angle

Boom Extension Counterweight Outriggers Rotation

11,0 m - 51 m 2 m 16 800 kg 26.6 ft x 23.0 ft 360˚


(36 ft - 167 ft) (6.6 ft) (37,000 lb) (100%) 100%

Boom
Radius Pounds x 1000
Boom Extension

Feet 36.1 ft + 6.6 ft 74.6 ft + 6.6 ft 128.8 ft + 6.6 ft 167.3 ft + 6.6 ft


0° 40° 0° 40° 0° 40° 0° 40°

10 22.0
15 22.0 22.0 22.0
20 22.0 22.0 22.0
25 22.0 22.0 22.0 22.0
30 22.0 22.0 22.0 22.0 12.2
35 22.0 22.0 22.0 12.2
40 22.0 22.0 22.0 12.2
45 22.0 22.0 22.0 12.2
50 22.0 22.0 22.0 12.2
55 22.0 22.0 19.0 19.4 12.2
60 20.4 16.6 17.0 12.2
65 18.0 14.6 15.0 12.2
70 12.8 13.2 12.2
75 12.0 11.8 11.6 12.0
80 11.2 11.2 10.4 10.6
85 10.4 10.4 9.2 9.6
90 9.6 9.6 8.2 8.6
95 8.8 8.8 7.4 7.6
100 8.4 8.4 6.6 6.8
105 7.6 5.8 6.0
110 7.0 5.2 5.4
115 6.2 4.6 4.8
120 4.0 4.2
125 3.4 3.6
130 2.8 3.0
135 2.4 2.6
140 2.0
145 1.6
150

Grove GMK4100B 17
Symbols glossary

Axles Counterweight Grade Outriggers

Boom Drive Heavy duty jib Radius

Boom elevation Electrical system Hoist Rotation

Boom extension Engine Hookblock Speed


H

Boom length Extension Hydraulic system Steering

Boom nose Frame Lights Suspension

Brakes Fuel tank capacity Oil Swing

Cab Gear Outrigger controls Tires

Transmission

18
Notes

Grove GMK4100B 19
Manitowoc Cranes

Regional headquarters
Americas Europe, Middle East, Africa China Greater Asia-Pacific
Manitowoc, Wisconsin, USA Ecully, France Shanghai, China Singapore
Tel: +1 920 684 6621 Tel: +33 (0)4 72 18 20 20 Tel: +86 21 6457 0066 Tel: +65 6264 1188
Fax: +1 920 683 6277 Fax: +33 (0)4 72 18 20 00 Fax: +86 21 6457 4955 Fax: +65 6862 4040
Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062

Regional offices
Americas
Brazil
China
Beijing
Factories This document is non-contractual. Constant improvement and engineering progress
make it necessary that we reserve the right to make specification, equipment, and
Brazil price changes without notice. Illustrations shown may include optional equipment
Alphaville Chengdu and accessories and may not include all standard equipment.
Passo Fundo
Mexico Guangzhou
China
Monterrey Xian
TaiAn
Chile
Zhangjiagang
Santiago Greater Asia-Pacific
France
Australia
Charlieu
Europe, Middle East, Brisbane
Moulins
Africa Melbourne
Germany
Czech Republic Sydney
Wilhelmshaven
Netvorice India
India
France Chennai
Pune
Baudemont Delhi
Italy
Cergy Hyderabad
Niella Tanaro
Decines Pune
Portugal
Germany Korea
Baltar
Langenfeld Seoul
Fânzeres
Hungary Philippines
Slovakia
Budapest Makati City
Saris
Italy Singapore
USA
Lainate
Manitowoc
Netherlands
Port Washington
Breda
Shady Grove
Poland
Warsaw
Portugal
Baltar
Russia
Moscow
South Africa
Johannesburg
U.A.E.
Dubai
U.K.
Buckingham

©2016 Manitowoc
Form No. GMK4100B PG
Part No. 06-005 / 0516 / PDF www.manitowoc.com

You might also like