Day Subject Sequence Chapters/Units Topics

Basic English grammar: tenses, articles, adjectives, prepositions,

conjunctions, verb-noun agreement, and other parts of speech Basic
1 Verbal Aptitude
vocabulary: words, idioms, and phrases in context
Reading and comprehension Narrative sequencing
Data interpretation: data graphs (bar graphs, pie charts, and other graphs
2
representing data), 2- and 3-dimensional plots, maps, and tables
Quantitative Aptitude
Numerical computation and estimation: ratios, percentages, powers,
1 General Aptitude
3 exponents and logarithms, permutations and combinations, and series
Mensuration and geometry Elementary statistics and probability
4 Analytical Aptitude Logic: deduction and induction, Analogy, Numerical relations and reasoning
Transformation of shapes: translation, rotation, scaling, mirroring,
5 Spatial Aptitude assembling, and grouping
Paper folding, cutting, and patterns in 2 and 3 dimensions
6 Short Notes & Test Make short notes of Aptitude and give a test
7 Matrix algebra, systems of linear equations
Linear Algebra
8 eigenvalues and eigenvectors
Functions of single variable, limit, continuity and differentiability, mean
9
value theorems, indeterminate forms
10 evaluation of definite and improper integrals; double and triple integrals
Calculus partial derivatives, total derivative, Taylor series (in one and two variables),
11
maxima and minima, Fourier series
12 gradient, divergence and curl, vector identities, directional derivatives
line, surface and volume integrals, applications of Gauss, Stokes and
13
Green’s theorems.
First order equations (linear and nonlinear); higher order linear differential
14
equations with constant coefficients
Differential equations
15 2 Mathematics Euler-Cauchy equation; initial and boundary value problems
16 Laplace transforms; solutions of heat, wave and Laplace's equations.
Analytic functions; Cauchy-Riemann equations; Cauchy’s integral theorem
17
Complex variables and integral formula;
18 Taylor and Laurent series
Definitions of probability, sampling theorems, conditional probability;
19
Probability and Statistics mean, median, mode and standard deviation
20 variables, binomial, Poisson and normal distributions.
21 Full day break
Numerical solutions of linear and non-linear algebraic equations;
22 Numerical Methods integration by trapezoidal and Simpson’s rules; single and multi-step
methods for differential equations.
23
Short Notes & Test Make short notes of Mathematics and give a test
24
Day Subject Sequence Chapters/Units Topics
25 Free-body diagrams and equilibrium
26 friction and its applications including rolling friction
27 belt-pulley, brakes, clutches, screw jack, wedge, vehicles, etc
28 trusses and frames;
3 Engineering Mechanics
29 virtual work; kinematics and dynamics of rigid bodies in plane motion
impulse and momentum (linear and angular) and energy formulations;
30
Lagrange’s equation
31 Short Notes & Test Make short notes and give a test
32 Stress and strain, elastic constants, Poisson's ratio;
33 Mohr’s circle for plane stress and plane strain
34 thin cylinders
35 shear force and bending moment diagrams;
36 bending and shear stresses; concept of shear centre
37 deflection of beams
38 torsion of circular shafts;
Mechanics of Materials
39 4 Euler’s theory of columns
(SOM)
40 energy methods
41 thermal stresses; strain gauges and rosettes;
42 Full day break
testing of materials with universal testing machine; testing of hardness and
43
impact strength.
44
Short Notes & Test Make short notes of SOM and give a test
45
Day Subject Sequence Chapters/Units Topics
46 Revision Aptitude Revise short notes and so 100 questions
47
Displacement, velocity and acceleration analysis of plane mechanisms
48 Mechanisms
49 dynamic analysis of linkages
50 Cams cams
51
Gears gears and gear trains
52
5 Theory of Machines
53 Governors flywheels and governors
54
Balancing balancing of reciprocating and rotating masses;
55
56 Gyroscope gyroscope
57
Short Notes & Test Make short notes and give a test
58
59 Revise short notes and write all formulas 3 times
60 Revision Mathematics
Attempt all odd questions from GPY & a test
61
62 Basics Free and forced vibration of single degree of freedom systems
63 Damping effect of damping
6 Vibrations
64 Vib isolation vibration isolation; resonance; critical speeds of shafts
65 Short Notes & Test Make short notes and give a test
66 Revision Engineering Mechanics Revise shortnotes, attempt all ODD questions of G.P.Y. and a test
67 Full day break
68 Basics Design for static and dynamic loading
69 T.O.F. failure theories
70 S-N diagrams fatigue strength and the S-N diagram
principles of the design of machine elements such as bolted, riveted and
71 Joints
welded joints
7 Machine Design
72 Shafts shafts, gears
73 Bearings rolling and sliding contact bearings
74 Friction brakes and clutches, springs
75
Short Notes & Test Make short notes and give a test
76
Day Subject Sequence Chapters/Units Topics
77 Fluid properties; fluid statics
78 Fluid Static forces on submerged bodies
79 stability of floating bodies
80 Flowing fluids control-volume analysis of mass, momentum and energy; fluid acceleration

81 Bernoulli's differential equations of continuity and momentum; Bernoulli’s equation

8 Fluid Mechanics
82 Dimensional analysis dimensional analysis
83 Laminar flow viscous flow of incompressible fluids, boundary layer
84 Turbulent flow elementary turbulent flow
85 Pipe flow flow through pipes, head losses in pipes, bends and fittings
86 basics of compressible fluid flow
Short Notes & Test
87 Make short notes and give a test
88 Full day break
89 Revise short notes, write all formulas 3 times
90 Revision SOM
Do all ODD questions from GATE P.Y. and give a test
91
92 Modes of heat transfer; one dimensional heat conduction
93 resistance concept and electrical analogy,
Conduction
94 heat transfer through fins
95 unsteady heat conduction, lumped parameter system, Heisler's charts;
96
dimensionless parameters in free and forced convective heat transfer,
Convection
97 thermal boundary layer
98
9 Heat-Transfer
heat transfer correlations for flow over flat plates and through pipes, effect
99
Heat Exchanger of turbulence;
100 heat exchanger performance, LMTD and NTU methods
radiative heat transfer, Stefan- Boltzmann law, Wien's displacement law,
101
Radiation black and grey surfaces
102 view factors, radiation network analysis
103
Short Notes & Test Make shortnotes and give a test
104
Day Subject Sequence Chapters/Units Topics
105 Revise short notes, write all formulas 3 times
Revision TOM
106 Do all ODD questions from GATE P.Y. and give a test
107 Basics Thermodynamic systems and processes; properties of pure substances
108 0th & 1st law zeroth and first laws of thermodynamics
109 Heat & work calculation of work and heat in various processes;
110 2nd law second law of thermodynamics
111 tables thermodynamic property charts and tables,
10 Thermodynamics
112 Availability availability and irreversibility
113 TD Relations thermodynamic relations
114 Real gases behavior of ideal and real gases
115
Short Notes & Test Make short notes and give a test
116
117 Revise short notes, write all formulas 3 times
Revision Vibration
118 Do all ODD questions from GATE P.Y. and give a test
119 Full day break

120 Air and gas compressors

Power Engineering
121 vapour and gas power cycles, concepts of regeneration and reheat.
122
I.C. Engines Air-standard Otto, Diesel and dual cycles
123
124 Thermodynamics
11 Vapour and gas refrigeration and heat pump cycles
125 Application Refrigeration and air-
conditioning
126 properties of moist air, psychrometric chart, basic psychrometric processes
127 Impulse and reaction principles, velocity diagrams
128 Turbomachinery Pelton-wheel, Francis and Kaplan turbines
129 steam and gas turbines
Day Subject Sequence Chapters/Units Topics
130 Revise short notes, write all formulas 3 times
Revision Machine Design
131 Do all ODD questions from GATE P.Y. and give a test
132 Revise short notes and write all formulas 3 times
133 Revision Mathematics
Attempt all EVEN questions from GPY & a test
134
135 Structure and properties of engineering materials
136 phase diagrams, heat treatment
12 Engineering Materials
137 stress-strain diagrams for engineering materials
138 Short Notes & Test Make short notes and give a test
139 Different types of castings, design of patterns, moulds and cores;
140 Casting solidification and cooling; riser and gating design
141 Make short notes and give a test of casting
142 Plastic deformation and yield criteria;
143 fundamentals of hot and cold working processes
Casting, Forming and
13 Forming load estimation for bulk (forging, rolling, extrusion, drawing) and sheet
144 Joining Processes
(shearing, deep drawing, bending) metal forming processes
145 make short notes and give test of forming
principles of powder metallurgy. Principles of welding, brazing, soldering
146
Joining processes and adhesive bonding.
147 make short notes and give test of joining processes
148 Revise short notes, write all formulas 3 times
Revision Fluid Mechanics
149 Do all ODD questions from GATE P.Y. and give a test
150 Revise short notes, write all formulas 3 times
Revision Engineering Mechanics
151 Do all EVEN questions from GATE P.Y. and give a test
152 Full day break
Day Subject Sequence Chapters/Units Topics
153 Mechanics of machining; basic machine tools
154 single and multi-point cutting tools, tool geometry and materials
155 tool life and wear; economics of machining;
156 principles of non-traditional machining processes
Machining and Machine
14
157 Tool Operations principles of work holding, jigs and fixtures; abrasive machining processes
158 NC/CNC machines and CNC programming
159
Short Notes & Test make short notes and give a test
160
161 Limits, fits and tolerances; linear and angular measurements
162 comparators; interferometry; form and finish measurement
alignment and testing methods; tolerance analysis in manufacturing and
163
15 Metrology and Inspection assembly
concepts of coordinate-measuring machine
164
(CMM). Start making short notes
165 Short Notes & Test Finish short notes and give a test
166 Revise short notes, write all formulas 3 times
Revision Heat Transfer
167 Do all ODD questions from GATE P.Y. and give a test
168 Revise short notes, write all formulas 1 time, do ODD questions from
Revision SOM
169 Workbook/practice book
170 Revise short notes, write all formulas 3 times
Revision Thermodynamics
171 Do all ODD questions from GATE P.Y. and give a test
Basic concepts of CAD/CAM and their integration tools, additive
172 Computer Integrated
16 manufacturing
Manufacturing
173 Make shortnotes and give a test
174 Full day break
175 Production Planning and Forecasting models, aggregate production planning, scheduling
176 Control materials requirement planning; lean manufacturing
177
Inventory Control Deterministic models; safety stock inventory control systems
178
179 Linear programming, simplex method
17 Industrial Engineering
180 transportation, assignment, network flow models
Operations Research
181
simple queuing models, PERT and CPM
182
183
Short Notes & Test Make short notes and give a test
184
Day Subject Sequence Chapters/Units Topics
185 Power Plant
186 IC Engines Revise short notes, write all formulas 2 times, do all GATE P.Y.Q. and give a
Revision
187 RAC test
188 Fluid Machines
189 Revision Engineering Material
Revise short notes , write all formulas 3 times, do all ODD questions from
GATE PY, give a test
190 Revision Casting
191 Revise short notes , write all formulas 3 times, do all ODD questions from
Revision Metal forming and joining
192 GATE PY, give a test
193 Machining & M/C tool Revise short notes , write all formulas 3 times, do all ODD questions from
Revision
194 operations GATE PY, give a test
195 Revise short notes , write all formulas 3 times, do all ODD questions from
Revision Industrial Engineering
196 GATE PY, give a test
197
198 Revision write formulas of all subject
199
200 Test Give 2 online Full Length Test