0% found this document useful (0 votes)
212 views13 pages

Company Profi Le: IHC Hytop

IHC Hytop is an ISO 9001:2000 certified company that specializes in complete hydraulic systems, power packs, winches and controls. It has over 70 experienced professionals and well-equipped workshops for assembly. IHC Hytop provides engineering services from design to delivery for dredging, offshore, shipbuilding and other heavy industries. It is committed to quality and safety and provides commissioning and 24/7 service support worldwide.

Uploaded by

Hanzil Hakeem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
212 views13 pages

Company Profi Le: IHC Hytop

IHC Hytop is an ISO 9001:2000 certified company that specializes in complete hydraulic systems, power packs, winches and controls. It has over 70 experienced professionals and well-equipped workshops for assembly. IHC Hytop provides engineering services from design to delivery for dredging, offshore, shipbuilding and other heavy industries. It is committed to quality and safety and provides commissioning and 24/7 service support worldwide.

Uploaded by

Hanzil Hakeem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

IHC Hytop

Company Profile
IHC Hytop Introduction

About IHC Hytop BV Production and Quality


IHC Hytop, part of IHC Merwede, ISO 9001:2000 certified, brand IHC Hytop has well-equipped workshops for the assembly of hydraulic systems and winch constructions. The clean assembly work
independent and specializes in complete hydraulic systems, is separated from the construction and repair department.
power packs, winches and controls for all conceivable applicati- Our objective is to support our organisation with a certified quality management system in accordance with standards of ISO
ons in the dredging, shipbuilding, offshore, petrochemical and 9001:2000 standards. All systems and equipment we supply will be in-house tested even when not required. IHC Hytop has a state
heavy (lifting) industry. Our project organization with over 70 of the art testing facility having sufficient capacity to test the largest systems. Our excellent production facility, the extensive quality
experienced professionals has the capacity to deliver complete, system and test programme guarantees top quality hydraulic system solutions.
large scale installations, including electronic controls.

The experience and know-how are available within our own


organization to execute projects requiring basic & detailed
engineering, planning, production, hydraulic piping and on-site
commissioning activities. We are an EPIC subcontractor serving
clients worldwide with 24/7 support by our VCA (SCC) certified
service team keeping our customers’ investments productive.

Engineering and Commitment


IHC Hytop is committed to provide a solid support: from engi-
neering to delivery. In practice this means each project starts
with a clear listing of the requirements and wishes. These are
translated into well-considered engineering work, including risk
analysis, calculation of output values and recommendations for
the expected working.
Specific hydraulic applications make heavy demands on our
engineering department to come up with original often innova-
tive practical solutions. A mixture of creativity and commitment
combined with technical expertise, state of the art 3-D model-
ling software and a practical sense is the perfect recipe for suc-
cessful projects.

Commissioning and Services


Our principle is to deliver all system solutions in good working order including functional inspection of electric, hydraulic and me-
chanical performance. Prior start-up each system has been tested under full load and settings are checked in conformity with the
specs. Each system is delivered with manuals and instructions, and also with a possible training.
The IHC Hytop Service Team is on call 24 hours a day, 7 days a week, provide service work anywhere in the world on systems supp-
lied by any manufacturer. Our Service Team maintains hydraulic systems from all manufacturers. Options include a service contract,
regular inspections, full oil analysis and condition monitoring. We can offer a service agreement tailored to your needs.
Besides professional repair and maintenance work, the Service Team also provides sensible advice and full reports. Renovation and
modification of old, outdated or damaged systems and components give them a new lease of life.

HSE Management
Contact
During all our business activities we have the responsibility to protect our environment and the safety of our personnel as well as
local habitants and our customers’ personnel. IHC Hytop conducts a Health, Safety, and Environment (HSE) culture with room for IHC Hytop main offices are in Sliedrecht (The Netherlands) located 20 km from the port of Rotterdam and 90 km from Amsterdam
continuous improvement of awareness, notion off- and our performances within this area. All personnel employed by IHC Hytop Schiphol airport. Recently capacity has been increased by opening our new production facility in Emmeloord. Besides our own
are responsible to strive and optimise our working methods and engineered products with respect to HSE related objectives as global network of agents and service offices, and memberships of branch organisations, we can support you through the IHC
prevention of harm to people, of property and environmental damage, and striving to continuous improvement on HSE issues. All Merwede network as well. Our team of over 80 experienced professionals, together having more than 1000 years of experience, is
our assembly, maintenance and service activities are certified according SCC*2004/04. ready to serve you. Just contact us and check www.ihchytop.com.
IHC Hytop Offshore Oil & Gas

Market Applications
IHC Hytop uses her in-house resources for Engineering, Procurement, Construction,
Installation and on-site commisioning activities to deliver complete, large scale
Offshore Oil and Gas hydraulic installations for:
Complete hydraulic systems for use in the OFFSHORE industry, is - Turret mooring systems, internal and external
one of our specializations. IHC Hytop’s focus is on upstream Oil & - Turret connect / disconnect systems
Gas industrial applications, such as: - Buoy pull-in systems
- Buoy locking systems
- Catenary Anchor Leg Mooring Systems (CALM buoys) - Hose reeling systems
- Floating Production Storage & Offloading facilities (FPSO) - Hawser reeling systems for tandem mooring
- Jack-up platforms - Spread mooring systems
- Jack-up vessels - Jacking systems (rack and pinion, positive engagement)
- Pipe laying vessels - Cantilever skidding systems
- Stinger handling systems
- Stinger uplift compensation systems
- Stinger shock absorption systems
- Special handling systems

IHC Hytop is a high quality system supplier, serving clients worldwide with
24/7 support by our VCA (SCC) certified service team, keeping our customers
investments productive.

We will gladly put in our expertise and experience for your projects.
For detailed product information please check our website www.ihchytop.com
or simply contact us for further information.

If you have a different application, please challenge us to find the right solution
for you!
IHC Hytop Dredging

Dredging Products and Systems


IHC Hytop, part of the IHC Merwede Group, is supplier of integrated hydraulic systems for almost all ves-
sels and dredging equipment built within the IHC Merwede group. Consequently we gained a lot of expe-
rience integrating hydraulic systems onboard small and very large hopper and cutter dredging vessels.
Having a leading position in this specialized market IHC Hytop develops new equipment and system solu-
tions that help increase the efficiency of the dredging process.

To increase your efficiency we can provide you with following System solutions and equipment:
- Central hydraulic systems for Trailer Suction Hopper Dredgers (TSHD)
- Special bottom door cylinders with control manifolds
- Drag head heave compensation systems
- Drag head cylinder systems; submerged
- Central hydraulic systems for Cutter Suction Dredgers (CSD)
- Cutter head drive systems
- Hydraulic units for spud pole launching
- Winches for dredge arm positioning, side wire winches, ladder winches, barge mooring winches,
spud hoisting winches, anchor boom winches etc.
IHC Hytop Heavy Lifting & Industry

Innovative Solutions and Quality Equipment


IHC Hytop applies a comprehensive approach, utilizing its own
innovative engineering, techniques, quality fabrication and
application of safe and economical heavy lifting equipment and
industrial systems. We direct the work with our in-house team of
supervisors, project managers and engineers.

Our complete hydraulic installations are being applied in:

- Berth and RORO systems


- Mono pile upending and guidance systems
- Offshore load transfer systems (OLTS)
- Passive heave compensation systems
- Active heave compensation systems
- Jacking systems for jack-up work platforms
- Cranes onto offshore installation vessels & barges

When your application is not mentioned, we invite you to


challenge us to provide the right solution for you!
IHC Hytop Hydraulic Power Packs

Electro-hydraulic Power Packs


Among others IHC Hytop designs and manufactures electrical-driven hydraulic power packs. Our systems with installed power from
a few kW till 2 MW and up are all being designed according customer specification and/or classification requirements. Power packs
with or without hydraulic reservoirs, control manifolds, filtration systems, local control panels e.g., can be delivered skid mounted or
completely containerized; even when used in hazardous area.

Diesel-hydraulic Power Packs


When electric power is not available our diesel-driven hydraulic power packs offer a proper alternative to electro hydraulic ones.
Both one-off and serial production of diesel power packs for marine and zone 1 hazardous area application are within our expertise.
IHC Hytop’s custom built diesel power packs are available in a variety of configurations; permanently skid mounted, or completely
self-contained (offshore certified) portable units. Besides high quality, reliability, easy accessibility and low maintenance cost, sound
attenuation is a factor in our unit design.
IHC Hytop Winch Systems

Hydraulic operated Winches


Through the years we have built up a lot of experience by supplying and maintaining
winches onboard dredging vessels demanding extreme long lifetimes, totally enclo-
sed drive systems, constant tension, variable speeds etc. This gained experience is
used to build up a nice track-record for applications in the heavy lifting and offshore
oil & gas industry as well.

Our high quality hydraulic operated rotary drum winches are operating:

- Dredger suction pipe handling systems


- Suction mouth levelling & heave compensation systems
- Bow coupling units of dredging hoses
- Cutter head handling systems
- Pontoon hauling systems
- A-frame hoisting and luffing systems
- Riser pull-in systems
- Mooring chain pull-in & re-tensioning systems
- Stinger handling systems for pipe-laying vessels

Winch types available


IHC Hytop winches are available in standardised
versions having 2.5 - 50mT line-pull, and custom
made versions till 500mT line-pull and up.
Horizontal or vertical pulling direction, with or
without spooling device, flat drums or (LEBUS)
grooved drums, with or without control consoles
and wire ropes, everything is possible!
IHC Hytop Cylinders and Actuators

Hydraulic Cylinders
Special high quality hydraulic cylinders with 40-1,000
mm bore, up to 10,000 mm stroke and maximum 700
bar supply pressure is one of our specialties as well.
Telescopic execution, rods with chrome/nickel or ce-
ramic coatings and integrated position measuring,
certified materials and welding or any design accor-
ding certifying authorities (DNV, ABS, etc.) are our
“standard”.

Together with IHC Vremac Cylinders B.V., more than


40 years of experience in design of and maintaining
such cylinders, applied in the harshest environments,
enables us to transform customer requirements in to
fit-for-purpose cylinder specifications.

ESD Valve Automation


For the petrochemical industry IHC Hytop is well known as supplier of
Emergency Shut Down (ESD) valve automation systems, consisting of:

- Fire safe shut off valves (ball, gate, globe, etc.)


- Hydraulic operated actuators (located in fire resistant casing)
- Local, manual and remote operated control cabinets
- Electro-hydraulic power pack, EEx, with accumulator back-up

The systems (self contained units as well) are designed, engineered


and build according the worldwide approved Shell DEP specifications.
IHC Hytop Electronic Controls

Electronic Controls
IHC Hytop designs, builds and programmes its own electronic control systems for safe and hazar-
dous area (EEx) applications. Since we have extensive knowledge of both manifold and electronic
control, you can expect unbiased advice. The result is a system which operates smoothly, without
control conflicts.

Components we supply include PLC’s, bus systems, sensors, operating consoles, switch boxes and
control software; all complete and fit for purpose. You can expect inventive and innovative control
solutions, which brings the implementation of imaginative hydraulic applications within reach.

All our electrical system solutions are:


- Designed and built according CE regulations
- Designed and built according customer requirements
- As good as it is controlled!

After design, assembly, testing, delivery and commissioning the system, IHC Hytop hands over “the
key”, so our customers only have to start-up and operate it.
IHC Hytop Manifolds and Piping

Hydraulic Piping
Projects always require interconnecting hydraulic piping systems. IHC Hytop can offer complete systems with required piping ma-
terial, bracketing, full engineering, site-construction supervision and obtains certification for the piping. Our piping systems can be
fitted with connections of any size and type, from mechanical distortion to welded flanges or cones. The pipelines and connections
are produced in steel, stainless steel or as flexible hoses. All our systems are tested to 1.5 times the operating pressure and will be
cleaned in accordance with NAS/ISO standards. Prefabricated piping, complete with instructions for installation by third parties can
be delivered as well.

Manifolds
For over 25 years IHC Hytop’s professionals provide in-house design, assembly and
testing for a great variety of manifolds. Design will be carried out by the use of the
latest advanced 3-D software. Therefore all customer requirements and preferen-
ces can be incorporated easily and efficiently.
By using DIN and CETOP connection surfaces and cartridges the use of universal
components can be guaranteed. During assembly and testing stage the compo-
nents will be adjusted and set to required values.
IHC Hytop can manufacture manifolds for serial or one-off production in all feasi-
ble sizes and for a great variety of applications.
IHC Hytop After Sales & Services

After sales & services


IHC Hytop is an EPIC (Engineering, Procurement, Installation and
Commissioning) supplier serving clients world wide with 24/7
support by our VCA (SCC) certified after sales & services team
keeping our customers investments productive.
We also supply spare and replacement parts or equivalents when
these are obsolete and/or needed NOW. Reliable delivery and
pricing are guaranteed due to long term relationships we main-
tain with our suppliers.

Beat the downtime ENEMY!


The threat of wear is not the direct cost of replacements, but the costs associated with consequential installation at down-
time. A not working installation caused by a worn part, is way more expensive then a not working installation caused by pre-
ventive maintenance.

KEEP THE RIGHT SPARES ON STOCK!

Brands supplied by IHC Hytop


BARNES, BOSCH, BRAND, BRUENINGHAUS, BUCHER, CHAR-LYNN,
COMMAND, COMMERCIAL, CROSS, DANFOSS, DENISON, DINA-
MIC OIL, DONALDSON, DYNEX, EATON, EDI SYSTEM, ENERPAC,
EPPENSTEINER, FAIREY ARLON, FAWCETT CHRISTIE, FLENDER
HYDREX, HYDAC, HAGGLUNDS HYDREX, GRESEN, PARKER, HAG-
GLUNDS, HAWE, HTF, HUSCO, HYDAC, HYDRAFORCE, HYDRO-
MATIK, HYDROSTAR, HYDROTECHNIK, INTEGRATED, INTERMOT,
INTERNORMEN, KAWASAKI, STAFFA, KRACHT, LAMBORGHINI,
MARZOCHI, OLEODINAMICA, LINDER, MARZOCCHI, MONRACH,
MOOG, BOSCH RACINE, NORTHMAN, OIL CONTROL, OILGEAR,
OLAER, PALL, PARKER, POCLAIN, PZB, REXROTH, SAI, SALAMI, IHC HYTOP SERVICE, 24/7,
SAM, SAUER DANFOSS, SIEBENHAAR, STERLING, SUNDSTRAND,
SUN, TOKIMEC, TYRONE, UCHIDA, VICKERS, VOAC, VOLVO, VOITH,
VON RUDEN, WANDFLUH, WHITE, YUKEN
ALL OVER THE WORLD
IHC Hytop General Information

About IHC Merwede Research & Development


IHC Hytop is a member of the IHC Merwede group formally known as IHC Holland Merwede. The IHC Merwede units have been Innovation takes place within IHC Merwede at three different levels. In the various business units, specialists work every day on im-
grouped together in three divisions: Dredging & Mining, Offshore & Marine, and the group of sector-related products and services. proving and expanding their product knowledge and to incorporate this into the organisation. At a system level, engineers combine
Because of the technological expertise it brings together, this division is now known as Technology & Services. and integrate the systems where this is possible and relevant. This inspires them to build new and unique pieces of equipment. As
a company that strives to provide continuity to its customers through integrated long-term solutions, IHC Merwede focuses on in-
We want to provide continuity for our stakeholders. As a technological concern, we facilitate the life cycle of our clients’ capital as- novative services such as life cycle support.
sets. Long-term service of this kind enables us to create exceptional, enduring, partnerships and to supply a complete industrial and IHC Merwede spends about 3 to 4 % of its turnover to innovation. The in-house research institute MTI plays an important role in
technical product that allows our clients to achieve optimal performance. the Research & Development policy. MTI’s concentration of dredging and alluvial mining knowledge is unparalleled in the world.
Every day, the scientists at MTI work on research topics related to for instance the behaviour of various types of soil inside a dredge
pump or the effect of the hull shape on energy use during sailing every day. But they will also test new designs or calculate the
wear and tear of parts.

Work in progress
Work in progress of by the end of September 2007 had
a value of approximately € 1.3 Billion. In addition to that
the group received a letter of intent worth 450 million
euros (estimation of client) for 3 trailing suction hopper
dredgers.
For the offshore the order portfolio includes a Heavy
Lift Vessel and 6 other offshore vessels; for the dredging
7 trailing suction hopper dredgers and 4 custom-built
suction dredgers.

IHC Beaver Dredgers B.V. IHC Engineering Business Ltd. IHC Krimpen Shipyard B.V.
IHC Dredgers B.V. IHC Fundex Equipment B.V. MERWEDE DESIGN, s.r.o.
IHC Engineering Services B.V. IHC Handling Systems V.O.F. Merwede Repair B.V.
IHC Holland B.V. IHC Hydrohammer B.V. Merwede Shipyard B.V.
IHC Krimpen Shipyard B.V. IHC Hytop B.V.
IHC Mining IHC Lagersmit B.V.
MTI Holland B.V. IHC Metalix B.V.
Training Instute for Dredging (TID) IHC Offshore Systems B.V.
Verenigde Scheepswerf Heusden B.V. IHC Parts & Services B.V.
IHC Piping B.V.
IHC Sea Steel Ltd.
IHC Systems B.V. Working for IHC Merwede
IHC Vremac Cylinders B.V.
Shipbuilding in the Netherlands is growing again. The order book of IHC Merwede is growing. The complete organisation is
Merwede Interior B.V. looking for new people, who actively think along, who like to work with the latest technologies and have affinity with the ma-
Verenigde Scheepswerf Heusden B.V. ritime world. Further information on the different vacancies can be found on the site www.ihcjobs.nl. Open applications are
also welcome. For vacancies at IHC Hytop B.V. please check www.ihchytop.com under section ‘careers’!
Corporate Offices
Head Office – the Netherlands Offices – UK
Sliedrecht Blandford Forum
Riding Mill
Shipyards – the Netherlands
Hardinxveld-Giessendam Office – US
Hendrik-Ido-Ambacht Wayne, NJ
Heusden
Kinderdijk Representative offices IHC Hytop B.V.
Krimpen aan den IJssel Beijing – China
Sliedrecht Korwano – Slovakia
Mumbai – India Head Office
Offices – the Netherlands New Delhi – India P.O. Box 335, 3360 AH Sliedrecht
Apeldoorn St. Petersburg – Russia Industrieweg 30, 3361 HJ Sliedrecht, The Netherlands
Delfgauw T +31 184 43 19 33
Dordrecht Regional IHC Organizations worldwide F +31 184 43 16 16
Emmeloord Dubai – United Arab Emirates
Goes Tianjin/Tanggu & Guangzhou – P.R. of China Location Emmeloord
Sliedrecht Hendrik Ido Ambacht – The Netherlands Verlengde Gildenweg 19
Hendrik Ido Ambacht Lagos – Nigeria 8304 BK Emmeloord
Heusden Singapore – Republic of Singapore T +31 527 698 640
Kinderdijk Tianjin – China F +31 527 698 993

3e druk
[email protected]
www.ihchytop.com

You might also like