Liquid

High Accuracy/General-purpose/PD Flowmeter

GENERAL SPECIFICATION
ULTRA OVAL GS.No.GBU005E-14
METER SIZE: 39, 41, 45, 50, 52, 53, 55, 56, 57

■ GENERAL
Our workhorse PD flowmeter series is redesigned in this
ULTRA OVAL with the most advanced multi-function
electronic register (ULTRA register) capable of indicating
the instantaneous flowrate and total flow on an easy-to-
read LCD and of providing the pulse and analog output. Meter sizes 39, 41, 45
Meter sizes 55, 56
Significantly improved performance along with compact and
lightweight design are among the many benefits it offers.
■ FEATURES
1. Flow range expanded by 10 to 90% (over the previously
offered OVAL meters of the same sizes).
2. Absence of mechanical reduction gear train combined with
special carbon bearings contributes to low pressure loss Meter sizes 50, 52, 53
and long life. Meter size 57
3. Thanks to pocketless design, the process fluid is virtually
free from stagnation in the measuring chamber-beneficial 5. Output signal is available in two channels simultaneously
to a broad range of fluids, particularly chemicals and in the form of total flow (4/20mA DC factored or
foods. unfactored current pulses) and instantaneous flowrate
4. Microprocessor-based ULTRA register indicates variables- signal (4 to 20mA DC analog).
total flow, both resettable and cumulative, instantaneous 6. A complete series of explosionproof models also available.
flowrate, selectable with mode select switch, plus alarm 7. We also manufacture models approved for applicable
(low battery alarm) on the LCD. high-pressure gas control law.
■ GENERAL SPECIFICATIONS
● Meter Body
Item Description
Meter size 39 41 45 50 52 53 55 56 57
Nominal size 10mm 20mm 25mm 40mm 50mm
Flange 1 group JIS 10K RF, ASME/JPI 150 RF
rating 3 group JIS 16, 20, 30K RF, ASME/JPI 300 RF, DIN PN 10, 16, 20, 25
Flow range See flow range tables (page 3).
Standard －10 to ＋120℃ (※1)
Operating
Low ———— －60 to ＋60℃
temperature
High ———— 120 to 200℃ 120 to 260℃
range
Jacketed ———— ——— 120 to 260℃
Accuracy ±0.5% RD and ±0.2% (Option)
Body SCS14 or ▲SCS16
Rear cover SUS316 or ▲SUS316L
Materials Rotors 39:Special carbon only, 41 to 57 : SUS316 or ▲SUS316L
Bearings 39:Special carbon only, 41 to 57 : Special carbon or ceramics (※2)
Shafts SUS316 or ▲SU316L
Connection ———— Rc 1/2 Rc 3/4
Jacketed
Max. operating press. ———— 0.98MPa
Flow direction Right→ left (standard), left→ right, bottom→ top, top→ bottom
※1: Applicable only to ATEX and FM explosionproof. ※ : ▲ Special
※2: With ceramics bearings, the max. allowable temperature is 60℃. (For information, consult the factory.)

● Flange Rating and Max. Operating Pressure (MPa)

Flange group Temp. JIS 10K RF ASME/JPI 150 RF JIS 20K RF JIS 30K RF ASME/JPI 300 RF
Max. 120℃ 1.18 1.51 —— —— ——
1 Max. 200℃ 1.18 1.25 —— —— ——
Max. 350℃ —— —— —— —— ——
Max. 120℃ —— —— 2.45 2.94 2.94
3 Max. 200℃ —— —— 1.7 1.7 1.7
Max. 350℃ —— —— 1.5 1.5 1.5
Applies to body material code C. For body material code E, consult the factory.

http://www.oval.co.jp/english

Head Office (Tokyo): Tel. +81 3-3360-5121 Fax. +81 3-3365-8605

International Sales Division Email: [email protected]
Overseas Branch Offices: Beijing, Netherlands, Seoul, Singapore, Taipei
ULTRA OVAL Meter size: 39 to 57 GBU005E-14

● Register Specifications
Item Description
Meter size ※39 41 ※45 50, 52, ※53 55, 56 ※57
Local Cumulative totalizing counter (8 digits) 0.1 mL (std.) 0.001 L (std.) 0.001 L (std.) 0.01 L (std.) 0.1 L (std.) [1L (std.)] (※1)
display Reset counter (7digits) C mode 1 mL, 0.01 L 0.01 L, 0.1 L 0.01 L, 0.1 L 0.1 L, 1 L 1 L, 0.01 m3 [0.01m3, 0.1m3] (※1)
(LCD) Instantaneous flow b1 mode 1 mL/h (std.) 0.01 L/h (std.) 0.1 L/h (std.) 1 L/h (std.) 1 L/h (std.) 1 L/h (std.)
(※3) rate (5 digits) b2 mode 0.01 mL/min (std.) 0.0001 L/min (std.) 0.001 L/min (std.) 0.01 L/min (std.)
—— None Local LCD only
Analog 4 to 20 mADC Refer to diagram, page 6.
Type Scaled or unscaled : 0/1=4/20 mADC
Current Pulse
Pulse width Scaled: 1ms (std.), 50 ms Unscaled: 2ms
(※5,6)
Unit of scaled pulse Same as of LCD counter (※2)
Scaled or unscaled : NPN transistor output : Max. impressed voltage 30 VDC
Output signal

Type allowable current : 50 mA,

Open Pulse transistor on voltage : 1.5VDC and below
collector (※5,6) Pulse width Scaled: 1ms (std.), 50 ms Unscaled: 2ms
Unit of scaled pulse Same as of LCD counter (※2)
Type Scaled or unscaled : [0]1 VDC Max. [1] 7 VDC Min.
Pulse
Voltage Pulse width Scaled: 1ms (std.), 50 ms Unscaled: 2ms
(※5,6)
Unit of scaled pulse Same as of LCD counter (※2)
Without output signal Installed lithium battery Life: 8 years (2 years with explosionproof construction ④ and ⑤ )
Power External power source : 12 to 45 VDC (analog, current pulse)
supply 12 to 24 VDC (open collector, voltage pulse)
With output signal
12 to 45 VDC (combination analog and current pulse)
Current consumption : Max. 30 mADC Refer to diagram in page 6. (※3)
Capture cable w/external shield
Transmission cable
(VCTF 1.25 mm2, finished O. D. 8.5 to 12mm) (※4)
Transmission length Max. 1km
2-wire system Analog or current pulse
Transmission lines 3-wire system Open collector or voltage pulse
4-wire system Analog + current pulse
Ambient temperature –10 to +60°C (Without dew condensation)
Select either one from following two
　① Non-explosionproof type ⑤ FM Class I, Division I / Group C, D T4
Explosionproof configuration 　② TIIS Exd ⅡB T4 / Exia ⅡB T4, Exia ⅡB T3 (※7) AEx / Exd ⅡB T4
　③ NEPSI Exd ⅡB T4 ⑥ KOSHA Exd ⅡB T4
　④ ATEX Ⅱ 2G Exd ⅡB T4
EMC 2004 / 108 / EC
Applicable EU directive ATEX 94 / 9 / EC (※8)
PED 97 / 23 / EC (※9)
EMC EN55011 : 1998 / A1 : 1999 Group 1, Class B EN61000-6-2 : 1999
Applicable EN standard
ATEX EN60079-0 : 2006, EN60079-1 : 2007
Degree of Protection for enclosure IP66 (Dust-tight/Watertight Type)-IEC/EN60529 : 1991+A1 : 2000, JIS C 0920
Material for housing Aluminum die casting
Finish Munsell No. 2.5PB5/8 (baked melamine)
※1 : Values in [ ] are those for Type 57 high temperature, low temperature, and jacketed model.
※2 : If factored pulse units other than above are required, consult the factory.
※3 : Battery powered register features a local indicator alone; output signal is not available.
※4 : For wiring of explosionproof type, do not fail to use the ancillary pressure-resistant packing. Also, in case of TIIS explosionproof type used under the ambient temperature of 45℃
or higher, use a cable resistant to the temperature of 75℃ or higher.
※5 : Under certain circumstances, the max. flowrate may have limitations if the minimum factored pulse unit is chosen and the pulse width exceeds 1
msec. If this problem arises, consult the factory.
※6 : With factored pulse unit indicated with an asterisk ※, pulse width other than 1 ms is NOT selectable.
However, in case of Type 57, this is applied to the standard type, sudden temp. change corresponding type, and standard, flowmeters or such.
※7 : Explosionproof configuration of ULTRA OVAL register with batch control function.
※8 : Details as 94/9/EC compliant explosionproof equipment ※9 : Details as 97/23/EC compliant pressure equipment
Applicable hazardous area Zone 1 and Zone 2 Type of Machinery Pressure machinery
Kind of the fluid Liquid
Fluid group 1 and 2
DN (mm) Nominal size 10mm to 50mm
Max. operating pressure 2.94MPa (120℃)
Category Para. 3, Sec. 3 of 97/23EC Directive

■ NOMINAL METER FACTORS

Meter size Nominal meter factors mL/P Max. frequency Hz Max. flowrate m3/h Pulse P/rev.
39 0.09838 33.9 0.012 2
41 0.4896 34.0 0.06 2
45 1.2339 94.6 0.42 4
50 4.968 [4.968] 111.8 [111.8] 2 4 [4]
52 9.664 [9.664] 109.2 [109.2] 3.8 4 [4]
53 17.513 [17.513] 101.5 [101.5] 6.4 4 [4]
55 23.07 [34.60] 168.6 [112.4] 14 6 [4]
56 37.33 [74.66] 178.6 [89.3] 24 8 [4]
57 98.04 [196.08] 124.7 [62.3] 44 8 [4]
※：
［ ］is for Low/High temperatures and it is a value with a jacket.


ULTRA OVAL Meter size: 39 to 57 GBU005E-14

■ FLOW RANGES
● Meter sizes: 39 to 45
Linearity: ±0.35% Linearity: ±0.15% (Option)
Operating temp. range: –10 to +120°C Unit in L/h Operating temp. range: –10 to +120°C Unit in L/h
Viscosity Less than 0.3mPa・s to 0.8mPa・s to 2mPa・s to 5mPa・s to Viscosity Less than 0.3mPa・s to 0.8mPa・s to 2mPa・s to 5mPa・s to
Meter size 0.3mPa·s 0.8mPa・s 2mPa・s 5mPa・s ＊ 200mPa・s Meter size 0.3mPa·s 0.8mPa・s 2mPa・s 5mPa・s ＊ 200mPa・s

39 2 to 12 1.4 to 12 0.7 to 12 0.35 to 12 0.2 to 12 39 3 to 12 2 to 12 1 to 12 0.5 to 12 0.3 to 12

41 18 to 60 12 to 60 4 to 60 2.5 to 60 1 to 60 41 27 to 60 18 to 60 6 to 60 3.7 to 60 1.5 to 60
45 50 to 420 35 to 420 15 to 420 10 to 420 5 to 420 45 75 to 420 52 to 420 22 to 420 15 to 420 7.5 to 420
＊ Only model 45 can handle up to 1000mPa·s
● The standard accuracy for model 39 is ±0.35%. Consult the factory
　for ±0.2% accuracy model.

● Meter sizes: 50 to 57
1. Linearity: ±0.35% 4. Linearity: 0.15% (Option)
Operating temp. range: –10 to +120°C (std.) Unit : m3/h Operating temp. range: –10 to +120°C Unit : m3/h
Viscosity Less than 0.3mPa・s to 0.8mPa・s to 2mPa・s to 5mPa・s to Viscosity Less than 0.3mPa・s to 0.8mPa・s to 2mPa・s to 5mPa・s to
Meter size 0.3mPa·s 0.8mPa・s 2mPa・s 5mPa・s 1000mPa・s Meter size 0.3mPa·s 0.8mPa・s 2mPa・s 5mPa・s 1000mPa・s
50 0.3 to 1.6 0.15 to 1.6 0.1 to 1.6 0.05 to 2 0.03 to 2 50 0.5 to 1.6 0.3 to 1.6 0.15 to 1.6 0.08 to 2 0.05 to 2
52 0.7 to 3 0.4 to 3 0.3 to 3 0.15 to 3.8 0.08 to 3.8 52 1 to 3 0.7 to 3 0.5 to 3 0.25 to 3.8 0.15 to 3.8
53 1.1 to 5 0.7 to 5 0.55 to 5 0.28 to 6.4 0.15 to 6.4 53 1.6 to 5 1.1 to 5 0.75 to 5 0.4 to 6.4 0.22 to 6.4
55 1.8 to 11 1.2 to 11 1 to 11 0.4 to 14 0.26 to 14
56 3.5 to 20 2.5 to 20 2 to 20 0.9 to 24 0.6 to 24 Operating temp. range: –10 to +60°C Unit : m3/h
57 8 to 37 5 to 37 4 to 37 2 to 44 1.2 to 44 Viscosity Less than 0.3mPa・s to 0.8mPa・s to 2mPa・s to 5mPa・s to
Meter size 0.3mPa·s 0.8mPa・s 2mPa・s 5mPa・s 1000mPa・s

2. Linearity: 0.35% 55 2.7 to 11 1.8 to 11 1.5 to 11 0.6 to 14 0.4 to 14

Operating temp. range: 120 to 200°C Unit : m3/h 56 5.2 to 20 3.5 to 20 3 to 20 1.4 to 24 0.9 to 24
Viscosity Less than 0.3mPa・s to 0.8mPa・s to 2mPa・s to 5mPa・s to 57 12 to 37 8 to 37 6 to 37 3 to 44 2 to 44
Meter size 0.3mPa·s 0.8mPa・s 2mPa・s 5mPa・s 1000mPa・s
50 0.6 to 1.4 0.3 to 1.4 0.2 to 1.4 0.09 to 1.8 0.05 to 1.8 Operating temp. range: 60 to 120°C Unit : m3/h
52 1 to 2.7 0.8 to 2.7 0.5 to 2.7 0.23 to 3.4 0.15 to 3.8 Viscosity Less than 0.3mPa・s to 0.8mPa・s to 2mPa・s to 5mPa・s to
53 2 to 4.5 1.4 to 4.5 0.9 to 4.5 0.35 to 5.7 0.28 to 6.4 Meter size 0.3mPa·s 0.8mPa・s 2mPa・s 5mPa・s 1000mPa・s
55 3.6 to 9 2.4 to 9 1.5 to 9 0.6 to 12 0.4 to 14 55 4 to 11 2.7 to 11 2.2 to 11 0.9 to 14 0.6 to 14
56 7.5 to 18 5 to 18 3 to 18 1.4 to 21 0.9 to 24 56 8 to 20 5.2 to 20 4.5 to 20 2.1 to 24 1.3 to 24
57 15 to 33 10 to 33 6 to 33 3 to 39 2 to 44 57 18 to 37 12 to 37 9 to 37 4.5 to 44 3 to 44

3. Linearity: 0.35% 5. Linearity: ±0.15% (Option)

　Operating temp. range: 200 to 260°C Unit : m3/h 　Operating temp. range: 120 to 200°C Unit : m3/h
Viscosity 0.3mPa・s to Viscosity 0.3mPa・s to 0.8mPa・s to 2mPa・s to 5mPa・s to
0.8mPa・s to 2mPa・s to 5mPa・s to
　0.8mPa・s 　2mPa・s 　5mPa・s 1000mPa・s Meter size 　0.8mPa・s 　2mPa・s 　5mPa・s 1000mPa・s
Meter size
52 1 to 2.7 0.6 to 2.7 0.3 to 3.4 0.16 to 3.8 50 0.45 to 1.4 0.3 to 1.4 0.15 to 1.8 0.08 to 1.8

53 2 to 4.5 1.2 to 4.5 0.6 to 5.7 0.3 to 6.4 52 1.5 to 2.7 0.9 to 2.7 0.55 to 3.4 0.33 to 3.8

55 3.6 to 9 2 to 9 0.8 to 12 0.55 to 14 53 2.4 to 4.5 1.5 to 4.5 0.9 to 5.7 0.49 to 6.4

56 7.5 to 18 4 to 18 1.8 to 21 1.2 to 24 55 4 to 9 2.7 to 9 1.3 to 12 0.9 to 14

57 15 to 33 8 to 33 4 to 39 2.5 to 44 56 8 to 18 5.2 to 18 3.1 to 21 1.9 to 24

57 18 to 33 12 to 33 6.7 to 39 4.5 to 44
Note: 1. For measurement of high viscosity fluids (above 1000mPa·s),
consult the factory.
2. For flow range of meters for low temperature service (–60 to 6. Linearity: ±0.15% (Option)
+60°C) refer to Table 1 or 4. 　Operating temp. range: 200 to 260°C Unit : m3/h
3. For standard flowmeters (–10 to +60°C) refer to Table 1 or 4. Viscosity 0.8mPa・s to 2mPa・s to 5mPa・s to
4. For flow range of meters compatible with thermal shock (–10 　 2mPa・s 　 5mPa・s 1000mPa・s
Meter size
to +120°C), refer to Table 2 or 5. (Thermal shock means sharp
52 1.5 to 2.7 0.9 to 3.4 0.49 to 3.8
fluid temperature changes at a rate in excess of 3°C /min. or
staircase changes in excess of 30°C between steps.) 53 2.4 to 4.5 1.3 to 5.7 0.73 to 6.4
55 4 to 9 1.9 to 12 1.3 to 14

● For flow range with “water,” select by temperature 56 8 to 18 4.6 to 21 2.8 to 24

and viscosity brackets from the table below. 57 18 to 33 10 to 39 6.7 to 44
Temperature range Viscosity range
Max. 30℃ 0.8 to 2.0 mPa・s
30 to 80℃ 0.3 to 0.8 mPa・s
80 to 120℃ Less than 0.3 mPa·s


ULTRA OVAL Meter size: 39 to 57 GBU005E-14

■ METER ERRORS AND PRESSURE LOSSES

Meter sizes: 39, 41, 45

Meter error (%)

39 41 45

3 10 30

Pressure loss (kPa)

7.5
2 20

5
1 10
2.5

0 25 50 75 100
Flowrate (%)

Meter sizes: 50, 52, 53 Meter size: 55

Meter error (%)

Meter error (%)

Pressure loss (kPa)

Pressure loss (kPa)

40

30

20

10

Flowrate (%) Flowrate (%)

Meter size: 56 Meter size: 57

Meter error (%)
Meter error (%)

Pressure loss (kPa)

Pressure loss (kPa)

Flowrate (%) Flowrate (%)

NOTE: 100% flowrate shows the maximum flowrate at individual viscosity.


ULTRA OVAL Meter size: 39 to 57 GBU005E-14

■ HOOKUP WITH RECEIVING INSTRUMENTS

Receiving instruments

ULTRA OVAL
Totalizer
(EL0122)

Batch controller
Valve control
(EL1810)
output

Pulse divider Open

(SU1308) MOS-FET

Totalizer
(EL0122)
Scaled pulse (current, open collector, voltage)

Unscaled pulse (current, open collector, voltage) Converter, Analog output

Compensator Pulse output
Analog (4 to 20mADC) (EL084 )

Flow computer
Pulse output
OVAL
MODEL
EL4000

(EL4001 series)

Power supply unit

(SU1303)
Recorder

NOTE: Typical examples are shown here.

Many other receving instruments are acceptable.

■ WIRING CONNECTIONS

(1) Current pulse output (2-wire system) (2) Analog output (2-wire system)
Terminal block

V 24VDC 1
24VDC
Below
Terminal block 600 Terminal block
2
SIG V
1 1 12 to 45VDC
+
3
0V SIG
2 2 Power supply
—
4
G Below
3 3 +
0V 600

4 4 Analog indicator
—

In case of current input

OVAL receiving instrument OVAL receiving instrument
NOTE: OVAL offers two circuit configurations to accept current pulses as NOTE: To accept a voltage signal, couple an external
shown above. See the respective instruction manual of receiving load resistor (see acceptable load resistance
instrument for correct connections. range on page 6).

(3) Current pulse + Analog output (4-wire system)

NOTE 1:
Terminal block Tie point In an OVAL receiving instrument, an internal load
12 to 45VDC resistor plays the role of I/V conversion. But if you
+
1 Power supply build a system like the one shown here with a
Minimum commercially available totalizer, a combination
Load resistor 4/20mA x load resistance serves as a current
— electrical capacity 60mA
2 pulse/voltage pulse converter, make sure of the
+ input level of the totalizer before use.
＊
3 Totalizer
G NOTE 2:
— With a configuration like the one shown here
4 + where an OVAL receiving instrument is used,
make sure of the current carrying capacity of
Analog indicator
receiving instrument’s power supply before use.
— If found inadequate in current carrying capacity,
＊: Select Voltage signal input for the totalizer. prepare an additional power supply for the analog
Make sure of the trigger level of incoming voltage signal and determine indicator.
the supply voltage and load resistance value.


ULTRA OVAL Meter size: 39 to 57 GBU005E-14

(4) Open collector pulse (3-wire system) (5) Voltage pulse (3-wire system)
Terminal block Terminal block
12 to 24VDC
1 V Constant 1 V
E ( 30VDC) voltage 12 to 24VDC
1K
2 SIG R Select R so that the 2 SIG
allowable current be
Max. 50mA 50mA max. Over 10K
3 0V 3 0V

1ms (Std.) or 50ms

4 4
Min.7V
(Max.12V
1ms (Std.) or 50ms V = 24V)
Max.1V

● Range of Load Resistance 1650

(for current pulse and analog output)
Operating range
This instrument uses a two-wire transmission line for analog and pulse
signals, so the line serves for both power supply and signal.
A DC power supply is required for transmission loop.

Load resistance ( )
(600)
When connecting a meter to the loop, ensure that the meter and the
load resistance of cable conductor is within the operating limits shown
300
in the figure at right.
Standard: Power supply voltage = 24VDC 0
Load resistance = 250Ω 0 12 (24) 45
Power supply voltage（V DC）

■ PRODUCT CODE EXPLANATION (Meter sizes 39, 41, 45)

Code No.
Item Description
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ － ⑨ ⑩ ⑪ ⑫
Type L U S ULTRA OVAL, standard version (–10 to +120℃)
3 9 Nominal size 10mm
Meter size 4 1 Nominal size 10mm
4 5 Nominal size 10mm
C SCS14
Body material
E SUSF316 [Special]
1 JIS 10K RF, ASME / JPI 150 RF
Flange rating
3 JIS 16 to 30K RF, ASME/JPI 300 RF, DIN PN 10 to 25
1 － Standard bearings (Special carbon)
5 － Ceramic bearings (Depends on liquid kind.)
Bearing type (※1)
7 － Polymerization-inhibited ceramics bearings (Depends on liquid kind.)
8 － Polymerization-inhibited carbon bearings (Special carbon)
A Basic ULTRA model
Register type (※2)
B Batch controller equipped ULTRA register (LW74E/LW76E)
3 Non-explosionproof
4 TIIS explosionproof
5 ATEX explosionproof (※3)
Register configuration
6 FM explosionproof (※3)
7 NEPSI explosionproof
8 KOSHA explosionproof (※3)
0 0 No output signal, Local LCD only (w/battery unit)
0 1 Unscaled pulse (Current pulse) 2 wires
0 2 Scaled pulse (Current pulse) 2 wires
0 5 Unscaled pulse (Open collector pulse) 3 wires
Types of output signal 0 6 Scaled pulse (Open collector pulse) 3 wires
(Register code A only.) 0 7 Unscaled pulse (Voltage pulse) 3 wires
0 8 Scaled pulse (Voltage pulse) 3 wires
1 0 Analog 2 wires
1 1 Analog + Unscaled pulse (Current pulse) 4 wires
1 2 Analog + Scaled pulse (Current pulse) 4 wires
Batch control function 7 4 Pneumatic batch controller (LW74E register) 1-step open/1-step close type
(Only register type B) 7 6 Pneumatic batch controller (LW76E register) 2-step open/2-step close type
※1 : Meter sizes 41 and 45 use the same body material SUS316 or 316L for rotors.
Meter size 39 uses special carbon rotors only.
※2 : For register code B, see General Specification (No.GBC201E).
※3 : Applies only to the basic model of ULTRA register.


ULTRA OVAL Meter size: 39 to 57 GBU005E-14

■ PRODUCT CODE EXPLANATION (Meter sizes 50 to 57)

Code No.
Item Description
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ － ⑨ ⑩ ⑪ ⑫
L U S ULTRA OVAL, Standard version (–10 to +120℃)
L U H ULTRA OVAL, high temp. service (120 to 260℃, Meter sizes 50: Max. 200℃)
L U N ULTRA OVAL, low temp. service (–60 to +60℃)
Type
L U J Jacketed ULTRA OVAL (Meter sizes 52 thru 57 only)
L U T ULTRA OVAL, compatible with sharp temp. changes (–10 to +120℃)
K U S ULTRA OVAL, Standard Flowmeter (–10 to +60℃)
5 0 Nominal size 20mm (3/4”)
5 2 Nominal size 25mm (1”)
5 3 Nominal size 25mm (1”)
Meter size
5 5 Nominal size 40mm (1 1/2”)
5 6 Nominal size 50mm (2”)
5 7 Nominal size 50mm (2”)
C SUS316 (Rotors), SCS14 (Body)
Body material
E SUS316L (Rotors), SCS16 (Body) [Special]
1 JIS 10K RF, ASME / JPI 150 RF
Flange rating
3 JIS16 to 30K RF, ASME, JPI 300 RF, DIN10 to 25
1 － Standard bearings (Special carbon)
5 － Ceramic bearings (Depends on liquid kind.)
Bearing type
7 － Polymerization-inhibited ceramic bearings (Depends on liquid kind.)
8 － Polymerization-inhibited carbon bearings (Special carbon)
A Basic ULTRA model
Register type (※1)
B Batch controller equipped ULTRA register (LW74E/LW76E)
3 Non-explosionproof
4 TIIS explosionproof
5 ATEX explosionproof (※2)
Register configuration
6 FM explosionproof (※2)
7 NEPSI explosionproof
8 KOSHA explosionproof (※2)
0 0 No output signal, Local LCD only (w/battery unit)
0 1 Unscaled pulse (Current pulse) 2 wires
0 2 Scaled pulse (Current pulse) 2 wires
0 5 Unscaled pulse (Open collector pulse) 3 wires
Types of output signal 0 6 Scaled pulse (Open collector pulse) 3 wires
(Only in case register type A is used.) 0 7 Unscaled pulse (Voltage pulse) 3 wires
0 8 Scaled pulse (Voltage pulse) 3 wires
1 0 Analog 2 wires
1 1 Analog + Unscaled pulse (Current pulse) 4 wires
1 2 Analog + Scaled pulse (Current pulse) 4 wires
Batch control function 7 4 Pneumatic batch controller (LW74E) 1-step open/1-step close type
(Only register type B) 7 6 Pneumatic batch controller (LW76E) 2-step open/2-step close type
※1 : For register code B, see General Specification Sheet (No.GBC201E)
※2 : Applies only to the basic model of ULTRA register.

■ OUTLINE DIMENSIONS [Standard register type A provided] (Unit in mm)

● Meter sizes: 39, 41, 45 150 207.8
90 79.8

MODE RESET MODE RESET

MODE MODE
□130

×0.1 l ×0.1 l
MIT MIT
φ90

b1：×10 l/h b2：×0.1 l/min b1：×10 l/h b2：×0.1 l/min

100

137

8
ATEX：M20
FM：1／
2 -14NPT

ATEX, FM Exploioproof Conduit connection G1/2 8 127.8

(Only for units with remote
Weight (Apporox.) 7.5kg
output signal)

Note: 1. For batch controller equipped ULTRA register, refer to General Specification (No. GBC201E).


ULTRA OVAL Meter size: 39 to 57 GBU005E-14

■ OUTLINE DIMENSIONS [Standard ULTRA register type A provided] (Unit in mm)

● Standard (Types: LUS, LUT, KUS)

● Meter L B
sizes : 50, 52, 53, 55, 56
90 C D

□130
MODE RESET MODE RESET
MODE MODE

×10 ml ×10 ml
MIT MIT

E
b1：×1 1/h b2：×10 s1/sis b1：×1 1/h b2：×10 s1/sis
100

137
8
ATEX：M20 F
8
FM：1／
2 -14NPT
Conduit connection G1/2
(Only for units with remote
ATEX, FM Exploioproof
output signal)
1. Flange rating 1 group
Meter size Flange rating L B C D E F Weight
(Approx.)
JIS 10K RF 200
50 216.8 86.8 40 φ96 134.8 9kg
ASME/JPI 150 RF 198
● Meter size : 57 JIS 10K RF 200 L B
52 207.8 74.8 43 □ 106
ASME/JPI 150 RF 200 90 C 122.8 D 10kg
ATEX, FM Exploioproof
JIS 10K RF 200
53 231.3 85.8 55.5 □ 106 133.8 11kg
ASME/JPI 150 RF 200
JIS 10K RF 230
55 244.8 92.8 62 □ 130 140.8 16kg
ASME/JPI 150 RF 233

G
JIS 10K RF 250
56 269.8 106.8 73 □ 154 154.8 20kg
ASME/JPI 150 RF 258

□130
MODE RESET MODE RESET
MODE MODE

● Meter L B
×0.1 l ×0.1 l

sizes : 50, 52, 53, 55, 56

MIT MIT

2. Flange rating 3 group

b1：×10 l/h b2：×0.1 l/min b1：×10 l/h b2：×0.1 l/min

E
90 C D
100

137

Meter size Flange rating L B C D E F Weight

(Approx.)
JIS 20K RF 204
□130

50 ATEX：M20
MODE RESET MODE RESET

JIS 30K RF8 208 216.8 86.8 40 φ96 134.8 12kg

MODE MODE

×10 ml ×10 ml

FM：1／ -14NPT F
MIT MIT

E
2 ASME/JPI 300 RF Conduit
204 connection G /2
b1：×1 1/h 1
b2：×10 s1/sis b1：×1 1/h
8
b2：×10 s1/sis

JIS 20K RF (Only for units with remote

204
100

output signal)
137

52 JIS 30K RF 212 207.8 74.8 43 □ 106 122.8 13kg

ASME/JPI 300 RF 207
JIS 20K RF 8 204
53 JIS 30K RF 212 231.3 85.8 55.5 □ 106 133.8 14kg
ATEX：M20 F
ASME/JPI 300 RF 207 8
FM：1／ 2 -14NPT
Conduit connection G1/2
JIS 20K RF 234 for units with remote
(Only
ATEX,JISFM Exploioproof
55 30K RF output
242 signal) 248.8 94.8 64 φ163 142.8 22kg
ASME/JPI 300 RF 240
JIS 20K RF 254
56 JIS 30K RF 262 271.8 109.8 72 φ193 157.8 26kg
ASME/JPI 300 RF 263

● Meter size : 57 L B
90 C D
ATEX, FM Exploioproof
G

G
□130

MODE RESET MODE RESET

MODE MODE

×0.1 l ×0.1 l
MIT MIT

b1：×10 l/h b2：×0.1 l/min b1：×10 l/h b2：×0.1 l/min

E
100

137

ATEX：M20 8
FM：1／
2 -14NPT Conduit connection G1/2 8 F
(Only for units with remote
output signal)
1. Flange rating 1 group
Meter size Flange rating L B C D E F G Weight
(Approx.)
JIS 10K RF 350
57 299.8 124.8 85 φ240 172.8 171.5 36kg
ASME/JPI 150 RF 357

2. Flange rating 3 group

Weight
Meter size Flange rating L B C D E F G (Approx.)
JIS 20K RF 354
57 JIS 30K RF 362 308.3 131.8 87 φ260 179.8 171.5 47kg
ASME/JPI 300 RF 363
In case the other Flange rating dimensions are requested consult factory.

Note: For batch controller equipped ULTRA register, refer to General Specification (No. GBC201E).


ULTRA OVAL Meter size: 39 to 57 GBU005E-14

■ OUTLINE DIMENSIONS [Standard ULTRA register type A provided] (Unit in mm)

● With cooling or heating tube (Types: LUH, LUN)

● Metersize : 50, 52 and 53

L B B

90 C D 90 C D
Cooling Heating
tube tube

130

130
RESET
MODE

X10 ml
MIT

E
E
b1:X1 I/h b2:X10 sI/sis
137

8 F F

Conduit connection (female) G1/2

(Only for units with remote output signal)

Flange rating 1 group

Meter size Flange rating L B C D E F Weight (Approx.)
(Overall length)
JIS 10K RF 200 W/Cooling tube 14kg
50 296.8 17 43 φ96 211.8
ASME/JPI 150 RF 198 W/Heating tube 13kg
JIS 10K RF 200 W/Cooling tube 17kg
52 353.3 59 47 □ 106 264.3
ASME/JPI 150 RF 200 W/Heating tube 16kg
JIS 10K RF 200 W/Cooling tube 18kg
53 376.8 70 59.5 □ 106 275.3
ASME/JPI 150 RF 200 W/Heating tube 17kg

● Metersize : 55, 56
L B B
90 C D 90 C D
Cooling Heating
tube tube
130
130

RESET
MODE MODE

X0.1 l

E
MIT
E

b1:X10 I/h b2:X0.1 l/min

137

8 F F

Conduit connection G1/2 (female)

(Only for units with remote output signal)

Flange rating 1 group

Meter size Flange rating L B C D E F Weight (Approx.)
JIS 10K RF 230 W/Cooling tube 23kg
55 371.3 43 71 φ163 258.3
ASME/JPI 150 RF 233 W/Heating tube 22kg
JIS 10K RF 250 W/Cooling tube 27kg
56 391.3 63 76 φ193 273.3
ASME/JPI 150 RF 258 W/Heating tube 26kg

● Metersize : 57
L B B
90 C D 90 C D

Cooling Heating
tube tube
G
G
130

130

RESET
MODE

X10 ml
MIT

b1:X1 1/h b1:X10 s1/sis

E

E
137

8 F F
Conduit connection G1/2 (female)
(Only for units with remote output signal)

Flange rating 1 group

Meter size Flange rating L B C D E F G Weight (Approx.)
JIS 10K RF 350 W/Cooling tube 43kg
57 424.3 90 87 φ260 295.3 171.5
ASME/JPI 150 RF 357 W/Heating tube 42kg

Note: For batch controller equipped ULTRA register, refer to General Specification (No. GBC201E).


ULTRA OVAL Meter size: 39 to 57 GBU005E-14

■ OUTLINE DIMENSIONS [Standard ULTRA register type A provided] (Unit in mm)

● Jacketed type (Type: LUJ)

●Meter sizes : 52, 53 B

L 90 C D
12

MODE RESET

130
MODE

190
X0.1 l

E
MIT

b1:X10 I/h b2:X0.1 I/min

74

Heating fluid connection

F
8 Rc 1/2
Conduit connection G1/2 (female)
(Only for units with remote output signal)

Weight
Meter size Flange rating L B C D E F
(Approx.)
JIS 10K RF 200
52 352.8 58.5 47 □ 106 263.8 13kg
ASME/JPI 150 RF 200
JIS 10K RF 200
53 376.3 69.5 59.5 □ 106 274.8 13.7kg
ASME/JPI 150 RF 200

●Meter sizes : 55, 56 B

L 90 C D
14

RESET
130

MODE MODE

C
213
×0.1 l
E
MIT

b1：×10 l/h b2：×0.1 l/min

137

8 F
Heating fluid connection
Conduit connection (female) G1/2 Rc 3/4
(Only for units with remote output signal)

Meter size Flange rating L B C D E F Weight

(Approx.)
JIS 10K RF 250
55 396.3 69 70 φ163 283.3 25kg
ASME/JPI 150 RF 253
JIS 10K RF 300
56 423.3 89 77 φ193 299.3 31kg
ASME/JPI 150 RF 306

●Meter size : 57 B
L 90 C D
25
35ß

130

MODE RESET
MODE
307

X0.1 l
E

MIT

b1:X10 I/h b2:X0.1 I/min

157

8 F Heating fluid
Conduit connection G1/2 (female) connection
(Only for units with remote output signal) Rc 3/4

Meter size Flange rating L B C D E F Weight

(Approx.)
JIS 10K RF 350
57 451.8 117.5 87 φ260 322.8 52kg
ASME/JPI 150 RF 357

10
ULTRA OVAL Meter size: 39 to 57 GBU005E-14

■ STRAINERS

It is essential that a strainer be provided immediately

upstream of, or as close as to, the flowmeter to prevent
solids suspended in the process fluid from entering the
meter, possibly leading to costly downtime.
※ The diagrams represent typical designs.

L
L

H
H

H
L L
3 3
SR0 1 0 1
1 C
2 (E)
3
(6) SR0 3 0 1
2
C
(E)
3 2
(6) 3 SR0 1C031
4
5
SR0 8 (E)C 0 (6)3 12
4
5

Nominal Body Screen Std. Applicable

Model number Flange rating L (mm) H (mm)
size material material screen mesh meters
C 3
JIS 10K RF/FF 180
SR011 (E) 0 (6) 1
152
ASME/JPI 150 RF 178

C 3 10mm JIS 20K RF 184 SCS14A SUS316

SR013 (E) 0 (6) 2
100 200 39, 41, 45
(3/8″) ASME/JPI 150 RF 178 (SCS16A) (SUS316L)

C 3
JIS 30K RF 188
SR013 (E) 0 (6) 3
126
ASME/JPI 300 RF 185

C 3
JIS 10K RF/FF 180
SR021 (E) 0 (6) 1
152
ASME/JPI 150 RF 177

C 3 20mm JIS 20K RF 184 SCS14A SUS316

SR023 (E) 0 (6) 2
100 200 50
(3/4″) ASME/JPI 150 RF 177 (SCS16A) (SUS316L)

C 3
JIS 30K RF 192
SR023 (E) 0 (6) 3
126
ASME/JPI 300 RF 188
JIS 10K RF/FF 230
SR031 C 0 3 1 165 SCS14A SUS316
ASME/JPI 150 RF 231

C 3 25mm JIS 10K RF/FF 230

SR038 (E) 0 (6) 1
209 100 52, 53
(1″) ASME/JPI 150 RF 231 SCS14A SUS316
JIS 20K RF 234 (SCS16A) (SUS316L)
C 3
SR038 (E) 0 (6) 2
209
ASME/JPI 150 RF 231
JIS 10K RF/FF 230
SR041 C 0 3 1 165 SCS14A SUS316
ASME/JPI 150 RF 233

C 3 40mm JIS 10K RF/FF 230

SR048 (E) 0 (6) 1
209 60 55
(1•1/2″) ASME/JPI 150 RF 233 SCS14A SUS316
JIS 20K RF 234 (SCS16A) (SUS316L)
C 3
SR048 (E) 0 (6) 2
209
ASME/JPI 150 RF 233
JIS 10K RF/FF 290
SR051 C 0 3 1 190 SCS14A SUS316
ASME/JPI 150 RF 296

C 3 50mm JIS 10K RF/FF 290

SR058 (E) 0 (6) 1
242 60 56, 57
(2″) ASME/JPI 150 RF 296 SCS14A SUS316
JIS 20K RF 294 (SCS16A) (SUS316L)
C 3
SR058 (E) 0 (6) 2
242
ASME/JPI 150 RF 296

11
ULTRA OVAL Meter size: 39 to 57 GBU005E-14

■ REQUIRED SPACE AROUND THE METER

Unit in mm

Min 300

Min 300
Min 500

Min 300
Min300 Min 500

■ OPERATING PRECAUTIONS
1. Every OVAL flowmeter is carefully assembled and 5. It is esseritial that a strainer (supplied by OVAL)
precisely adjusted to measure flows down to minute exclusively designed for OVAL flowmeters be used.
flows before is leaves the factory. Take every precaution 6. This flowmeter is not provided with subtract function.
in uncrating, installation in the piping assembly, and If pulsation in the flow (where the fluid moves back and
testing. forth in the pipeline under the influence of pressure) or
2. Never allow foreign solids to enter the measuring reversal of flow exists, the total counter may show erratic
chamber. reading, accumulating all incoming pulses irrespective of
3. Flush the piping assembly thoroughly. flow direction.
4. Avoid allowing the meter rotors to spin uncontrolled by
directing a stream of air, etc. or allowing the fluid to flow
excessively - even momentarily.

■ ORDERING INFORMATION
Please complete the following form when making inquiries.
1. Model L　　　　　　　　　　　　 □ Standard　□ High temp.　□ Low temp.　□ Jacketed
2. Fluid to be measured Name　　　　　　　　 Viscosity　　　　 mPa・s 　Specific gravity　　　　　　　
3. Flowrate (L/h, m3/h) Maximum　　　　　　　 Normal　　　　　　　　　 Minimum　　　　　　　　　　
4. Fluid temperature (℃) Maximum　　　　　　　 Normal　　　　　　　　　 Minimum　　　　　　　　　　
5. Ambient temperature (℃) Maximum　　　　　　　 Normal　　　　　　　　　 Minimum　　　　　　　　　　
6. Pressure (MPa) Maximum　　　　　　　 Normal　　　　　　　　　 Minimum　　　　　　　　　　
7. Flow direction Right ⇆ Left, Bottom ⇆ Top
8. Flange connection Nominal size　　　　　　　mm, Flange rating　　　　　　　　　
9. Required linearity ±　　　　　　　　％
□ Non-explosionproof □ TIIS □ ATEX □ FM □ NEPSI
10. Explosionproof configuration
Pressure-resistant packing (selectable only for ATEX or FM) □ Required □ Not required
11. Accessories □ Strainer, □ Air eliminator, □ Companion flange
12. Quantity Including accessories　　　　　　　　
　　　　　　　(dosing, sampling, blending process, etc.)
13. Application □ Flow integration, □ Flow indication, □ Record, □ Flow control, □ Batch control,
□ CPU interface, □ Others
14. Receiving instrument Type, manufacturer, model, specifications (input, output, power supply, etc.)
15. Distance between flow meter
　　　　　　　　m
and receiving instrument

The specification as of May, 2015 is stated in this GS Sheet. Specifications and design are subject to change without notice.

Sales Representative:

GS.No.GBU005E
初版 改訂 印刷
01.08 15.05 14.09
(100)