1

Table 1. List of factory installed options (FIOPs)(a)

Quick Reference Guide 2” MERV 8 or MERV 13 Pleated Filters w/ Removal Tool Hinged Access Panels
Air-Fi™ Wireless Communication Interface (WCI) Horizontal Side Access with Circuit Breaker
BACnet™ Communication Interface (BCI) Horizontal Side Access with Disconnect Switch
Voyager™ Barometric Relief(b) (c) LonTalk® Communication Interface (LCI)
Clogged Filter/Fan Failure Switch(d) Modulating Gas Heat Furnace w/ a 2.5:1 Turndown Ratio(d)
12.5 to 25 Tons Packaged Rooftop Units Complete Coat™ Microchannel Condenser Coil Motor Shaft Grounding Ring(e)
Cooling and Gas/Electric Condensate Overflow Switch Oversized Motors
DCV Harness Powered/Unpowered Convenience Outlet(f)
Dehumidification Stainless Steel Drain Pan
Delivered VAV(d) Stainless Steel Heat Exchanger
Discharge Air Sensing Kit(d) Supply and Return Air Smoke Detectors(d)
Economizer - Low Leak/Downflow(c) Through the Base Electrical with Circuit Breaker
Economizer - Standard/Downflow(c) Through the Base Electrical with Disconnect Switch
Electric Heaters Through the Base Gas Provision
Model number description Fault Detection and Diagnostics (FDD) Tool-less Hail Guard
Frostat™(d)(g) Trane® Communication Interface (TCI)(h)
T*D Cooling Only (Electric Heat Optional), Downflow High Efficiency Motors Two Speed Fan Provision
T*H Cooling Only (Electric Heat Optional), Horizontal High Short Circuit Current Rated (SCCR) Electrical Variable Speed Fan Provision for Single Zone VAV
Y*D Gas Heat Unit, Downflow Subsystem(i)
Y*H Gas Heat Unit, Horizontal (a) Most Factory Installed Options are available for downflow air discharge units only. Verify with ordering system
for availability.
* Standard (S) or High (H) Efficiency (b) Requires an Economizer.
(c) Some field set up required.
(d) Requires ReliaTel Options Module.
(e) Available with Two Speed Fan or Variable Speed Fan.
(f) Must be ordered with Through the Base Electrical option or Horizontal Side Access, and either Unit Mounted
Disconnect switch or Circuit Breaker.
April 2020 RT-PRC038M-EN (g) Standard on high efficiency units.
© 2020
(h) TCI is for use with non-VariTrac™ systems and VariTrac systems.
(i) Available on 208V/60 Hz, 230V/60 Hz, and 480V/60 Hz only.

2
Table 2. 12½-25 ton packaged rooftop performance data (gas or electric heat)
Standard Efficiency High Efficiency
Nominal Size (Tons) 12.5 15 17.5 20 25 12.5 15 17.5 20 25
Cooling Performance
Nominal Airflow CFM / ARI Rated CFM 5,000/4,000 6,000/5,400 7,000/6,125 8,000/6,400 10,000/8,000 5,000/4,000 6,000/5,250 7,000/5,600 8,000/6,400 10,000/8,000
Tot / Sens Cap (MBh)(a) (b) 150.1/116.0 186.1/139.1 210.3/165.0 258.9/197.3 285.3/243.7 149.6/113.4 181.5/138.0 212.7/165.5 259.0/192.5 295.3/234.2
EER(c) 11 11 11 10.0 10.0 12.1 12.1 11.8 11.0 10.6
IEER (One Speed Fan / Multi or Variable TS*=12.4/13.5 TS*=12.4/13.2 TS*=12.4/13.2 TS*=11.6/12.4 TS*=11.6/12.4 13.5/15.0 14.0/15.0 13.0/14.0 12.4/14.0 12.4/15.0
Speed Fan)(d) YS*=12.2/13.5 YS*=12.2/13.2 YS*=12.2/13.2(e) YS*=11.4/12.4 YS*=11.4/12.4(e)
Gas Heating Performance(f)
Low Heat (Input/output) - (MBh) 150.0/120.0 250.0/200.0 250.0/200.0 250.0/200.0 250.0/200.0 150.0/120.0 250.0/200.0 250.0/200.0 250.0/200.0 250.0/200.0
Medium Heat (Input/output) - (MBh) 350.0/280.0 350.0/280.0 350.0/280.0 350.0/280.0 350.0/280.0 350.0/280.0 350.0/280.0 350.0/280.0 350.0/280.0 350.0/280.0
High Heat (Input/output) - (MBh) 250.0/200.0 350.0/280.0 350.0/280.0 400.0/320.0 400.0/320.0 250.0/200.0 350.0/280.0 350.0/280.0 400.0/320.0 400.0/320.0
Weight
Net Weight (Lbs) - Gas Heat 1448 1838 1894 1977 2020 1971 2222 2186 2257 2291
Net Weight (Lbs) - Electric Heat 1373 1763 1819 1902 1945 1868 2076 2037 2107 2108
Roof curb BAYCURB026B BAYCURB027B
Unit Cabinet Size B C C+
Filters(g) - Type Furnished Throwaway Throwaway Throwaway Throwaway Throwaway Throwaway Throwaway Throwaway Throwaway Throwaway
Downflow - Number and Size Recommended (2) 20x20x2 (4) 20x20x2 (4) 20x20x2 (4) 20x20x2 (4) 20x20x2 (4) 20x20x2 (8) 20x20x2 (8) 20x20x2 (8) 20x20x2 (8) 20x20x2
(4) 20x25x2 (4) 20x25x2 (4) 20x25x2 (4) 20x25x2 (4) 20x25x2 (4) 20x25x2 (4) 20x16x2 (4) 20x16x2 (4) 20x16x2 (4) 20x16x2
Horizontal - Number and Size Recommended (2) 20x20x2 (8) 20x25x2 (8) 20x25x2 (8) 20x25x2 (8) 20x25x2 (8) 20x25x2 (12) 20x20x2 (12) 20x20x2 (12) 20x20x2 (12) 20x20x2
(4) 20x25x2
(a) Cooling performance is rated at 80/67/95 and 400 cfm/ton.
(b) Short orifice metering device.
(c) EER is rated at ARI conditions and in accordance with ARI standard 210/240 or 340/360.
(d) Integrated Energy Efficiency Ratio (IEER) is rated in accordance with AHRI standard 210/240 or 340/360.
(e) T/YS*211 = 11.8/12.9. T/YS*301 = 10.4/12.0
(f) Verify option availability in product data catalog.
(g) Optional 2” MERV 8 and MERV 13 filters also available.
3 4
Table 3. Unit MCA and MOP electrical data (standard indoor fan motor) Table 4. Unit indoor fan data
T/YS* Volts MCA MOP T/YH* Volts MCA MOP
Standard Oversized Standard Oversized
150 208-230/3 61 80 150 208-230/3 64 90 T/YS* Volts HP - RPM HP - RPM T/YH* Volts HP - RPM HP - RPM
460/3 29 40 460/3 30 40 150 208-230/3 208-230/3
575/3 22 30 575/3 23 30 460/3 3 - 1740 5 - 3450 150 460/3 3 - 1740 5 - 3450
380/3 36 45 180 208-230/3 68 90 575/3 575/3
180 208-230/3 69 90 460/3 33 45 380/3 5 - 3450 N/A 208-230/3
460/3 34 45 575/3 26 35
180 208-230/3 180 460/3 3 - 1740 5 - 3450
575/3 31 40 210 208-230/3 86 125
460/3 3 - 1740 5 - 3450 575/3
380/3 45 60 460/3 41 50
575/3 208-230/3
210/211 208-230/3 77 100 575/3 33 45
380/3 5 - 3450 N/A 210 460/3 5 - 3450 7.5 - 3470
460/3 37 50 240 208-230/3 96 125
208-230/3 575/3
575/3 34 45 460/3 44 60 210/
211 460/3 5 - 3450 7.5 - 3470 208-230/3
380/3 52 70 575/3 38 50
575/3 240 460/3 5 - 3450 7.5 - 3470
240 208-230/3 105 150 300 208-230/3 117 150
380/3 7.5 - 3470 N/A 575/3
460/3 50 70 460/3 54 70
240 208-230/3 208-230/3
575/3 43 60 575/3 44 50
460/3 5 - 3450 7.5 - 3470 300 460/3 7.5 - 3470 N/A
380/3 60 80
575/3 575/3
300/301 208-230/3 112 150
380/3 7.5 - 3470 N/A
460/3 53 70
208-230/3
575/3 45 60 300/
301 460/3 7.5 - 3470 N/A
380/3 69 90
575/3
380/3

5
Table 5. Unit dimensional data
B C C+
Unit Length UL 106 11/16 122 5/16 122 5/16
Unit Width UW 70 13/16 84 3/16 84 3/16
UH
Unit Height UH 52 1/4 56 1/8 66 1/4
Clearance C1 60 60 60
Clearance C2 48 48 48 UW
UL
Clearance C3 36 1/8 36 1/8 36 1/8
Clearance C4 38 38 38
Clearance C5 72 72 72
Curb Length CL 102 1/2 116 7/8 116 7/8
Curb Width CW 67 81 81
Supply Length SL(a) 28 1/2 28 9/16 28 9/16
Supply Width SW(a) 55 1/2 69 1/2 69 1/2
Return Length RL(a) 20 7/8 22 1/4 22 1/4
Return Width RW(a) 63 77 77 RL
RW SL

SW
Trane and American Standard create comfortable, energy efficient indoor environments for commercial and
residential applications. For more information, please visit trane.com or americanstandardair.com.
CL
CW

(a) Dimensions are for curb openings and not duct inserts. Reference the product catalog for duct insert Trane and American Standard have a policy of continuous product and product data improvement and reserve the
dimensions. right to change design and specifications without notice. We are committed to using environmentally conscious print
practices.
RT-PRC038M-EN 04 Apr 2020
Supersedes RT-PRC038L-EN (Jul 2019) ©2020