Scribd
Upload
838 views2 pages

Bcw-Ds Indicator: An ISO 9001 Certified Company

The BCW-DS indicator is a belt weigher launched in 1977 that features high speed data acquisition and accuracy up to 4 meters/second. It contains a 32-bit processor, auto-calibration functions, and connectivity options like Ethernet. The indicator is enclosed to protect against EMI interference and features 8 load cell connections, 24-bit ADC, and a digital speed sensor. It has display, keypad, switch signal, and analog/digital interfaces to integrate with other devices.

Uploaded by

jdrana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
838 views2 pages

Bcw-Ds Indicator: An ISO 9001 Certified Company

The BCW-DS indicator is a belt weigher launched in 1977 that features high speed data acquisition and accuracy up to 4 meters/second. It contains a 32-bit processor, auto-calibration functions, and connectivity options like Ethernet. The indicator is enclosed to protect against EMI interference and features 8 load cell connections, 24-bit ADC, and a digital speed sensor. It has display, keypad, switch signal, and analog/digital interfaces to integrate with other devices.

Uploaded by

jdrana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

An ISO 9001 Certified Company

Innovating since 1977

BCW-DS
INDICATOR

Introduction
The BCW-DS is one of the most recent launches from our innovation centre. Taking the
performance of the belt weigher to a higher degree, this indicator has all the features
you could imagine of a belt weigher. The fully configurable, high speed data acquisition
module is very compact. Armed with a 32-bit processor, it is capable of achieving high
accuracies for belt speeds of up to 4 mtrs/sec. It has automatic zero compensation and
comes with various optional features like Profibus connectivity, Ethernet connectivity,
Remote display etc. Enclosed in a metallic enclosure, it is highly isolated from the harsh
EMI interferences encountered in the Industrial world and is easy and quick to configure.
The salient features are
 32-bit ARM CPU with 72 MHz & higher arithmetic speeds
 Max. connection Quantity: 8 loadcells
 Auto locking, key locking, key unlocking, digital setting & calibration and I/O
testing function available
 Auto zero tracking speed calibration and belt length calibration function available
 Accuracy guaranteed for even very low belt loads (system specific)
 Digital Proximity speed sensor designed to generate sufficient pulses even at very
low belt speed
 High Speed ADC is used to enable faster response
BCW-DS
INDICATOR

Technical Specifications
Operating Specification Operating Voltage: AC 220V ± 15% , 50/60 Hz
Max Power Consumption: 15 w
Operating temperature: -25 c to +40 c
Storage temperature: -30 c to +60 c
Relative humidity: Max 85% RH
Accuracy Grade: 0.5
System accuracy: 0.25% system specific
Display 8+4+4 red LED digital display
Display Refreshing time: setting range .01-2.0 s
Keypad 6 key membrane push - buttons
Loadcell interface Excitation voltage /Max current: DC 10V/250mA [8-350 Ω loadcells]
Signal input range: 0 – 25mV
Σ - Δ ADC: 24 bit,100,000 internal code used
Sampling Frequency: 200 Hz
Non-linearity :0.005% FS
Speed Sensor Output voltage / Max . Current : D C 12V/100mA
Interface Speed Pulse Input Range: 0.5 ~3000 Hz
Switch signal interface Digital output
4 normally open relay switch outputs (DO): AC250 V / DC 24 V, 1A
1 “Totalized weight high-speed pulse” Output [PO]: 100 mA,
DC5 ~24 V; weight per pulse and pulse width can be pre set
Analog Signal interface 4-20 mA corresponding to rate
Catalogue No: BCW-DS/01/19
4-20 mA proportional to load/ speed/ rate
Digital communication Optional RS232/RS485/Profibus /Ethernet modules
Connectable: PLC / LED Remote Display
Protection Level Front Panel of Panel mounting: IP 65
Dimension Panel Mounting: 160 x 84 x 188 mm [ W X H X D ]
Weight Panel mounting: 1.7 kg

IPA Pvt. Ltd.


472/B2, 12th Cross, IV Phase,
Peenya Industrial Area,
Bangalore - 560 058 TM

Ph: +91 80 - 2836 0253 / 2836 2851


014
Email: [email protected]
www.ipaindia.com An ISO 9001 Certified Company

You might also like