Validate Print Help Item Rate BoQ

Tender Inviting Authority: Superintending Engineer, 8th Circle, HPPWD Hamirpur on behalf of CE (HZ), HPPWD Hamirpur.

Name of Work: Improvement and widening of Sujanpur to Hamirpur via Kot Chouri Patlander Chhamaian road km.0/0 to 23/780 .(SH:- ROFD, retaining wal
tarring, W-Metal beam crash barriers, road side drain, Parapets, paver block and traffic signs board etc.).MDR-104 (Job No.CRF- HP-2021-22/178) under C

Contract No:

Name of the
Bidder/
Bidding Firm /
Company :

PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is lia
enter the Bidder Name and Values only )

NUMBER # TEXT # NUMBER # TEXT # NUMBER #

Sl. Item Description Quantity Units BASIC RATE with
No. GST In Figures To
be entered by the
Bidder in
Rs. P

1 2 4 5 13
1 Excavation in soil in hilly areas in all heights and depths and in all kinds of 69166.23 Per cubic
soil by manual/mechanical means including saturated soil comprising of metre
ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where
blasting is prohibited) and other intermediate classification of soil, setting out
true to the required lines, grades width cutting and trimming of side slopes
and level as shown in the drawing and as directed by the Engineer-in-
Charge at site according to the MORD 2014 technical specification clause
1603.1, 1603.2 and sorting out useful materials and stacking the same in all
leads and lifts in acquired width of the road and transportation of un-useful
material for filling in road ways, camber, embankments for grade
improvements and disposal of all surplus un-useful material to acquired
width of the road or on approved dumping sites through all modes of
transportation including head load or animals transport or mechanical
means alongwith its leveling fine dressing and carriage of machineries,
materials, tools equipments and safety measures and other incidentals
necessary to complete the work by mechanical means and/or labour if
required. Any loss to the public/private property during the course of
execution shall be the absolute responsibility of the contractor which shall
have to be duly compensated by him in all cases as per direction of
Engineer-in-Charge including entire carriage of material within all leads lifts
and other incidentals. Recovery of useful stone for 6340.24 cum (Six
thousand three hundred forty point twenty four) cubic metre shall be made
on prorata basis @ Rs.300/- (Rupees Three hundred only) per cubic
metre amounting to Rs. 1902072/- only (Nineteen lacs two thousand
seventy two) only In each running bill for this item. The rates are inclusive
of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed
by the Government.
2 Construction of sub-grade and earthen shoulders with approved material 9092.57 Per cubic
obtained from borrow pits with all leads and lifts, transporting to site, metre
spreading, grading to required slope and compacted to meet requirement of
table No.300.1 and 300.2 MORTH specification clause 408 and as per
direction of Engineer-in-Charge including entire carriage of material within all
leads and lifts and other incidentals. The rates are inclusive of octroi,
royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the
Government.

3 Construction of embankment with approved materials deposited at site from 35169.07 Per cubic
roadway cutting and excavation from drain and foundation of other metre
structures graded and compacted to meet requirement of tables 300.1 and
300.2 as per technical specification MORTH clause 305 and as per direction
of Engineer-in-Charge including entire carriage of material within all leads
and lifts and other incidentals. The rates are inclusive of octroi, royality,
Malkana, toll tax, sale tax, GST or other taxes imposed by the
Government.

4 Clearing and grubbing road land including uprooting rank vegetation, grass, 10.52 Hectare
bushes, shrubs, saplings and trees girth upto 300mm (three hundred
millimeter), removal of stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable material to be used or
auctioned, upto all leads and lifts including removal and disposal of top
organic soil not exceeding 150mm (one hundred fifty millimeters) in
thickness as per technical specification MORTH clause 201 and as per
direction of Engineer-in-Charge including entire carriage of material within all
leads and lifts and other incidentals. The rates are inclusive of octroi,
royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the
Government.
 5 Dismantling of existing structures like culverts, bridges, retaining walls and
other structure comprising of masonry, cement concrete, wood work, steel
work, including T&P and scaffolding wherever necessary, sorting the
dismantled material, disposal of unservicable material and stacking the
serviceable material within all leads and lifts as per technical specification
MORTH clause 202 and as per direction of Engineer-in-Charge including
entire carriage of material within all leads and lifts and other incidentals. The
rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or
other taxes imposed by the Government.

5.01 Cement concrete grade M-10 (M-ten). 200.00 Per cubic

metre
5.02 Cement concrete grade M-15 & M-20 (M-fifteen & M-twenty). 200.00 Per cubic
metre
5.03 Brick work in cement mortar. 200.00 Per cubic
metre
6 Scarifying of flexible pavements and disposal of dismantled materials upto
all leads and lift, stacking serviceable and unserviceable materials
separately, as per technical specification MORTH and as per direction of
Engineer-in-Charge including entire carriage of material within all leads and
lifts and other incidentals. The rates are inclusive of octroi, royality,
Malkana, toll tax, sale tax, GST or other taxes imposed by the
Government.

6.01 Bituminous courses. 71848.85 Per square

metre
6.02 Granular courses. 37072.75 Per square
metre
7.01 Construction of Granular sub-base by providing close graded material, 5560.91 Per cubic
mixing in a mechanical mix plant at OMC, carriage of mixed material to work metre
site, spreading in uniform layers with motor grader on prepared surface and
compacting with vibratory power roller to achieve the desired density,
complete as per drawing and technical specification clause 401 of MORTH
specifications 2013 table 400.1, Grading-I 150mm(one hundred fifty
millimeters)thick (GSB in II layers comprising of 1st layer =75mm (seventy
five millimeters) thick and 2nd layer of 75mm (seventy millimeters) thick
existing scarified WBM, used in GSB material by adding 30% (thirty percent)
fine aggregate for reconstruction portion and as per direction of Engineer-in-
Charge including entire carriage of material within all leads and lifts and
other incidentals. The rates are inclusive of octroi, royality, Malkana, toll
tax, sale tax, GST or other taxes imposed by the Government.

7.02 Construction of Granular sub-base by providing close graded material, 13171.41 Per cubic
mixing in a mechanical mix plant at OMC, carriage of mixed material to work metre
site, spreading in uniform layers with motor grader on prepared surface and
compacting with vibratory power roller to achieve the desired density,
complete as per drawing and technical specification clause 401 of MORTH
specifications 2013 table 400.1, Grading-I 150mm(one hundred fifty
millimeters)thick (GSB in II layers comprising of 1st layer =75mm (seventy
five millimeters) thick and 2nd layer of 75mm (seventy millimeters) thick
Fresh GSB material, and as per direction of Engineer-in-Charge including
entire carriage of material within all leads and lifts and other incidentals. The
rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or
other taxes imposed by the Government.
8 Providing, laying spreading and compacting graded stone aggregate of Wet 31628.99 Per cubic
Mix macadam (WMM) specification including premixing the material with metre
water at OMC in mechanical mix plant carriage of mixed material by tipper
to site, laying in uniform layers with paver in sub-base/base course on well
prepared surface and compacting with vibratory roller to achieve the desited
density. (WMM in 3 layers comprising of 1st layer = 75/100mm thick,
(seventy five/one hundred millimeters) 2nd layer of 75mm (seventy five
millimeters) thick and 3rd layer 75mm (seventy five millimeter) thick,as per
technical specification MORTH clause 406 and as per direction of Engineer-
in-Charge including entire carriage of material within all leads and lifts and
other incidentals. The rates are inclusive of octroi, royality, Malkana, toll
tax, sale tax, GST or other taxes imposed by the Government.

9 Providing and applying primer coat with bitumen emulsion on prepared 130289.45 Per square
surface of granular base including clearing of road surface and spraying metre
primer at the rate of 0.60kg/sqm (zero point sixty kilograme/square metre)
using mechanical means as per technical specification clause No. 502 of
MORTH specification 2013,and as per direction of Engineer-in-Charge
including entire carriage of material within all leads and lifts and other
incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax,
sale tax, GST or other taxes imposed by the Government.

10 Providing and applying tack coat with bitumen emulsion using emulsion 260578.89 Per square
pressure distributor at the rate of 0.20kg.per sqm. (zero point twenty metre
kilograme per square metre) on the prepared bituminous/granular surface
cleaned with mechanical broom as per technical specification clause 503 of
MORTH specification 2013, @ 2.00kg./10m2 (two kilogram/ ten square
meter ) and as per direction of Engineer-in-Charge including entire carriage
of material within all leads and lifts and other incidentals. The rates are
inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes
imposed by the Government.
11 Providing and laying Dense graded bituminous macadam with 100-120 TPH 7165.92 Per cubic
batch type HMP producing an average output of 75 tonnes (seventy five metre
tonnes) per hour using crushed aggregates of specified grading, premixed
with bituminous binder @ Min. 4.5 percent (four point five percent) by weight
of total mix and filler, transporting the hot mix to work site, laying with a
hydrostatic paver finisher with sensor control to the required grade, level and
alignment, rolling with smooth wheeled, vibratory and tandem rollers to
achieve the desired compaction as per MORTH specifiation clause No. 505
complete in all respect of MORTH specifications 2013. 50mm (fifty
millimeters thick), and as per direction of Engineer-in-Charge including
entire carriage of material within all leads and lifts and other incidentals. The
rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or
other taxes imposed by the Government.

12 Providing and laying 30mm (thirty millimeters) thick Bituminous concrete 3908.68 Per cubic
with 100-120 TPH batch type hot mix plant producing an average output of metre
75 tonnes per hour using crushed aggregates of specified grading, premixed
with bituminous binder @ Min 5.5 per cent (five point five percent) of mix
and filler, transporting the hot mix to work site, laying with a hydrostatic
paver finisher with sensor control to the required grade, level and alignment,
rolling with smooth wheeled, vibratory and tandem rollers to achieve the
desired compaction as per MORTH specification clause No.507 complete in
all respects of MORTH specifications 2013. 30mm (thirty millimeters) thick
and as per direction of Engineer-in-Charge including entire carriage of
material within all leads and lifts and other incidentals. The rates are
inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes
imposed by the Government.
13 Earth work in excavation of foundation of structures as per drawing and 7620.98 Per cubic
technical specification, including setting out, construction of shoring and metre
bracing, removal of stumps and other deleterious matter, dressing of sides
and bottom, backfilling the excavation earth to the extent required and
utililsing the remaining earth locally for road work as per MORTH
specification clause No.304 and as per direction of Engineer-in-Charge
including entire carriage of material within all leads and lifts and other
incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax,
sale tax, GST or other taxes imposed by the Government.

14 Plain cement concrete 1:3:6 (one cement: three sand: six graded crushed 10523.61 Per cubic
stone aggregate nominal mix in foundation and sub structures with crushed metre
stone aggregate 40mm (forty millimeters) nominal size mechanically mixed,
placed in foundation and compacted by vibration including curing for
14(fourteen) days as per MORTH technical specification/HPPWD
specification and as per direction of Engineer-in-Charge including entire
carriage of material within all leads and lifts and other incidentals. The rates
are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other
taxes imposed by the Government.

15 Supplying, fitting and placing HYSD bar reinforcement in super structure 38.12 Per metric
complete as per drawing and technical specification MORTH under section tonne
1600 and 2300 and as per direction of Engineer-in-Charge including entire
carriage of material within all leads and lifts and other incidentals. The rates
are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other
taxes imposed by the Government.

16 Plain cement concrete PCC M-15 (M-fifteen) in open foundation design mix 1666.16 Per cubic
with minimum cement contents 240kg/cum (two hundred forty kilogramme metre
per cubic meter) complete as per drawing and technical specifications, and
as per direction of Engineer-in-Charge including entire carriage of material
within all leads and lifts and other incidentals. The rates are inclusive of
octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by
the Government.
17 Plain cement concrete PCC M-20 (M-twenty)grade design mix with minimum 22.70 Per cubic
cement contents 250 kg/cum (two hundred fifty kilogramme per cubic meter) metre
in sub-structure complete as per drawing and technical specifications, and
as per direction of Engineer-in-Charge including entire carriage of material
within all leads and lifts and other incidentals. The rates are inclusive of
octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by
the Government.

18 Plain/reinforced cement concrete RCC M-20 (M-twenty) grade design mix 51.40 Per cubic
with minimum cement contents 300kg/cum (three hundred kilogramme per metre
cubic meter) in sub-structure complete as per drawing and technical
specifications, and as per direction of Engineer-in-Charge including entire
carriage of material within all leads and lifts and other incidentals. The rates
are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other
taxes imposed by the Government.

19 Plain/reinforced cement concrete RCC M-25(M-twenty five) in super- 47.38 Per cubic
structure design mix with minimum cement contents 340kg/cum (three metre
hundred forty kilogramme per cubic meter) complete as per drawing and
technical specifications, and as per direction of Engineer-in-Charge
including entire carriage of material within all leads and lifts and other
incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax,
sale tax, GST or other taxes imposed by the Government.

20 Providing and laying cement concrete wearing coat M-30 (M-thirty) grade 12.12 Per cubic
design mix with minimum cement contents 360kg/cum (three hundred sixty metre
kilogramme per cubic meter) including reinforcement complete as per
drawing and technical specifications, and as per direction of Engineer-in-
Charge including entire carriage of material within all leads and lifts and
other incidentals. The rates are inclusive of octroi, royality, Malkana, toll
tax, sale tax, GST or other taxes imposed by the Government.
21 Back filling with granular material behind abutment, wing wall and return wall 210.93 Per cubic
complete as per drawing and technical specification MORTH clause 710.4 of metre
IRC 78 and as per direction of Engineer-in-Charge including entire carriage
of material within all leads and lifts and other incidentals. The rates are
inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes
imposed by the Government.

22 Painting of parapet walls by two coats after filling the surface with synthetic 24.59 Per square
enamel paint in all shades on new plastered concrete surfaces ,and as per metre
direction of Engineer-in-Charge including entire carriage of material within all
leads and lifts and other incidentals. The rates are inclusive of octroi,
royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the
Government.

23 Provision of an reinforced cement concrete crash barrier at the edges of the 26.40 Linear metre
road, approaches to bridge structures and medians, constructed with M-20
(M-twenty) grade concrete with HYSD reinforcement conforming to IRC:21
and dowel bars 25mm (twenty millimeters) dia, 450mm (four hundred fifty
millimeters) long at expansion joints filled with pre-moulded asphalt filler
board, keyed to the structure on which it is built and installed as per design
given in the enclosure to MOST circular No. RW/NH-33022/1/94-DO III
dated 24 june 1994 as per dimensions in the approved drawing and at
locations,and as per direction of Engineer-in-Charge including entire
carriage of material within all leads and lifts and other incidentals. The rates
are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other
taxes imposed by the Government.

24 Drainage spout complete as per drawing and technical specification MORTH 20.00 Each
clause 2705 and as per direction of Engineer-in-Charge including entire
carriage of material within all leads and lifts and other incidentals. The rates
are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other
taxes imposed by the Government.
25 Laying reinforced cement concrete pipe NP3/prestressed concrete pipe 422.50 Per running
900mm (nine hundred millimeter) dia for culverts on first class bedding of metre
granular material in single row including fixing collar with cement mortar 1:2
(one cement: two sand) but excluding excavation, protection works,
backfilling, concrete and masonry works in head walls and parapets MORTH
clause under section 2900 and as per direction of Engineer-in-Charge
including entire carriage of material within all leads and lifts and other
incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax,
sale tax, GST or other taxes imposed by the Government.

26 Providing and laying of filter media with granular materials/stone crushed 1000.62 Per cubic
aggregates satisfying the requirements laid down in clause 710.1.4 of IRC metre
78 MORTH specifications to a thickness of not less than 600mm (six
hundred millimetere) with smaller size towards the soil and bigger size
towards the wall and provided over the entire surface behind abutment, wing
wall and return wall to the full height compacted to a firm coindition complete
as per drawing and technical specification,and as per direction of Engineer-
in-Charge including entire carriage of material within all leads and lifts and
other incidentals. The rates are inclusive of octroi, royality, Malkana, toll
tax, sale tax, GST or other taxes imposed by the Government.

27 Providing weep holes in brick masonry/plain/reinforced concrete abutment, 4247.00 Each

wing wall/return wall with 100mm (one hundred millimeter) dia PVC pipe,
extending through the full width of the structure with slope of IV:20H towards
drawing foce. Complete as per drawing and technical specifications MORTH
clause 2706 and as per direction of Engineer-in-Charge including entire
carriage of material within all leads and lifts and other incidentals. The rates
are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other
taxes imposed by the Government.
28 Providing and construction of a gabian structure for retaining earth with 1136.60 Per cubic
segments of wire creates of size 7mx3mx0.6m (seven metre into three metre
metre into zero point six metre) each divided into 1.5m (one point five metre)
compartments by cross netting, made from 4m (four metre) galvanized steel
wire @ 32 kg. (thirty two kilograme) per 10sqm (per ten square metre)
having minimum tensile strength of 300 (three hundred) mpa conforming to
IS: 280 and galvanizing coating conforming to IS:4826, woven into mesh
with double twist, mesh size not exceeding 100x100mm (one hundred into
one hundred millimeters), filled with boulders with least dimension of 200mm
(two hundred millimeters) all loose ends to be tied with 4mm (four millimetre)
galvanized steel wire,and as per direction of Engineer-in-Charge including
entire carriage of material within all leads and lifts and other incidentals. The
rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or
other taxes imposed by the Government.

29 Providing and fixing of retro-reflectorised cautionary, mandatory and

informatory sign as per IRC: 67 made of high intensity grade sheeting vide
clause 801.3, fixed over aluminium sheeting, 1.5mm (one point five
millimeters) thick supported on mild steel angle iron post
75mmx75mmx6mm (seventy five millimeters into seventy five millimeters
into six millimeters) firmly fixed to the ground by means of properly designed
foundation with M-15 (M-fifteen) grade cement concrete 45cmx45cmx60cm,
(forty five centimeter into forty five centimeter into sixty centimeters), 60cm
(sixty centimeter) below ground level as per approved drawing,and as per
direction of Engineer-in-Charge including entire carriage of material within all
leads and lifts and other incidentals. The rates are inclusive of octroi,
royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the
Government.

29.1 90cm (ninety centimeter) equilateral triangle 106.00 Each.

29.2 60cm (sixty centimeter) equilateral triangle. 60.00 Each.
29.3 60cm (sixty centimeter) circlulat 17.00 Each
29.4 90 cm (ninety centimeter) high Octagonal 29.00 Each
29.5 60cmx45cm(sixty centimeter into forty five centimeter) rectangular 171.00 Each
30 Direction and Place Identification signs upto 0.90sqm sizd Board : Providing 26.00 Per square
and erecting direction and place identification retro-reflectorised sign as per metre
IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over
aluminium sheeting, 2mm (two millimeters) thick with area not exceeding
0.90 sqm.(zero point ninety square metre) supported on a mild steel single
angle iron post 75x75x6mm (seventy five into seventy five into six
millimeters) firmly fixed to the ground by means of properly designed
foundation with M-15(M-fifteen) grade cement concret 45x45x60cm (forty
five into forty five into sixty centimetre), 60cm (sixty centimeter) below
ground level as per approved drawing, and as per direction of Engineer-in-
Charge including entire carriage of material within all leads and lifts and
other incidentals. The rates are inclusive of octroi, royality, Malkana, toll
tax, sale tax, GST or other taxes imposed by the Government.

31 Direction and Place Identification Signs more than 0.9 sqm size Board: 51.00 Per square
Providing and erecting direction and place identification retro-reflectorised metre
sign as per IRC: 67 made of high intensity grade sheeting vide clause 801.3,
fixed over aluminium sheeting, 2mm (two millimeter) thick with area
exceeding 0.9 sqm (zero point nine square metre) supported on a mild steel
angle iron post 75mmx75mmx6mm, (seventy five millimeters into seventy
five millimeters into six millimeters) 2 Nos, firmly fixed to the ground by
means of properly designed foundation with M-15 (M-fifteen) grade cement
concrete 45cmx45cmx60cm, (forty five centimeter into forty five centimeter
into sixty centimeter), 60cm. (sixty centimeter) below ground level as per
approved drawing, and as per direction of Engineer-in-Charge including
entire carriage of material within all leads and lifts and other incidentals. The
rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or
other taxes imposed by the Government.
 32 Providing and laying of hot applied thermoplastic compound 2.5mm (two 1206.33 Per square
point five millimeters) thick including reflectorising glass beads @ 250 gms metre
per sqm. Area, (two hundred fifty gramme per square metre) thickness of
2.5mm (two point five millimeters) is exclusive of surface applied glass
beads as per IRC:35. The finished surface to be level, uniform and free from
streaks and holes, as per MORTH technical specification clause 803 and as
per direction of Engineer-in-Charge including entire carriage of material
within all leads and lifts and other incidentals. The rates are inclusive of
octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by
the Government.

33 Reinforced cement concrete M-15 (M-fifteen) grade kilometre stone of

standard design as per IRC:8-1980, fixing in position including painting and
printing etc,and as per direction of Engineer-in-Charge including entire
carriage of material within all leads and lifts and other incidentals. The rates
are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other
taxes imposed by the Government.

33.01 5th kilometre stone (precast) 4.00 Each

33.2 Ordinary kilometer stone (precast) 23.00 Each
33.3 Hectometer stone (precast) 85.00 Each
34 Supplying and installation of delineators (roady way indicators, hazard 500.00 Each
markers, object markets), 80-100cm (eighty- hundred centimeter) high
above ground level, painted black and white in 15 cm (fifteen
centimeters)wide strips, fitted with 80x100mm (eighty into one hundred
millimeters) rectangular or 75mm (seventy five millimeters) dia circular
reflectorized panels at the top, buried or pressed into the ground and
conforming to IRC-79 and the drawings, and as per direction of Engineer-in-
Charge including entire carriage of material within all leads and lifts and
other incidentals. The rates are inclusive of octroi, royality, Malkana, toll
tax, sale tax, GST or other taxes imposed by the Government.
35 Providing and fixing road cat eyes complete as per drawing and technical
specification clause 805 of MORTH specifications 2013 and as per direction
of Engineer-in-Charge including entire carriage of material within all leads
and lifts and other incidentals. The rates are inclusive of octroi, royality,
Malkana, toll tax, sale tax, GST or other taxes imposed by the
Government.

35.1 Cat Eyes -ABS plastic type confirming to IRC/ASTM code of make 3m 2220.00 Each
(three metre) or averydension.
36 Providing and erecting overhead signs 12m (twelve metre) wide with a 2.00 Each
corrosion resistant 2mm (two millimeters) thick aluminium alloy sheet with
high intensity grade retro-reflective sheeting of encapsulated lens type with
vertical and lateral clearance given in clauses 802.2 and 802.3 MORTH
specifications 2013 and installed as per clause 802.7 over a designed,
support system of aluminium alloy or galvanized steel trestles and trusses of
sections and type as per structural design requirement and approved plans
and as per direction of Engineer-in-Charge including entire carriage of
material within all leads and lifts and other incidentals. The rates are
inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes
imposed by the Government.

37 Providing and erecting and "W" metal beam crash barrier comprising of 1644.00 Per running
3mm (three millimeters) thick corrugated sheet metal beams rail, 70cm metre
(seventy centimeters) above road/ground level, fixed on ISMC series
channel vertical post, 150x75x5mm (one hundred fifty into seventy five into
five millimeters) spaced 2m (two meters) centre to centre, 1.8m (one point
eight metre) high, 1.1m (one point one metre) below ground/road level, all
steel parts and fitments to be galvanised by hot dip process, all fittings to
conform to IS: 1367 and IS: 1364, metal beam rail to be fixed on the vertical
post with a spacer of channel section 150x75x5mm, (one hundred fifty into
seventy five into five millimeters), 330mm (three hundred thirty millimeters)
long complete as per clause 811,and as per direction of Engineer-in-Charge
including entire carriage of material within all leads and lifts and other
incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax,
sale tax, GST or other taxes imposed by the Government.
 38 Providing and laying of interlocking concrete block pavements having 6650.00 Per square
thickness 80mm (eighty millimeters) M-40 (M-forty) grade of concrete make metre
NTC as per IS: 15658 as per drawing and technical specification,and as per
direction of Engineer-in-Charge including entire carriage of material within all
leads and lifts and other incidentals. The rates are inclusive of octroi,
royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the
Government.

Total in Figures

Quoted Rate in Words #VALUE

H:- ROFD, retaining wall , Breast wall, cross drainage work ,metalling and
P-2021-22/178) under CRIF.

ns, else the bidder is liable to be rejected for this tender. Bidders are allowed to

NUMBER # TEXT #
TOTAL AMOUNT With TOTAL AMOUNT
Taxes In Words

54 55
#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE! #VALUE!
 #VALUE! #VALUE!

#VALUE! #VALUE!

#VALUE!
Please Enable Macros to View BoQ information
Q information