ALLGEMEINE

GENERAL NOTES NOTES GÉNÉRALES

BEMERKUNGEN
1. Tyre Size Designation C.2
2. Service Description C.2
3. Inflation Pressure C.2, C.3

C
4. Load Capacities C.3
5. Dimensions C.3
6. Choice of Tyre Size C.4, C.5
7. Rims C.5
8. Dual spacing C.5
9. Valves C.5
COMMERCIAL VEHICLE PNEUS POUR
NUTZFAHRZEUGREIFEN
TYRES VÉHICULES UTILITAIRES
10. C-Type Sizes on 5° Drop-Centre Rims – Radial
10.1 ‘45’ to ‘80’ Series Metric Designation C.6 to C.8
10.2 ‘85’ to ‘95’ Series Metric Designation C.8 to C.9
10.3 Metric Sizes C.9
10.4 Rims C.10
10.5 Minimum Dual Spacings C.11 to C.14
11. CP-type Sizes on 5° Drop-Centre Rims for Motorcaravans – Radial C.15
11.2 Rims C.15
11.3 Minimum Dual Spacing C.16
12. C-Type Ultra Light Sizes on 5° Drop-Centre Rims C.17
12.1 Rims C.17
13. Metric "A" Tyres C.18
13.1 Rims C.18
14. TR Tyres C.19
14.1 Rims C.19
15. Sizes on 15° Drop-Centre Rims – Radial
15.1 ’45’ to ‘70’ Series Metric Designation C.20, C.21
15.2 ‘75’, ‘80’ and ’90’ Series Metric and Code Designation (Normal Section Sizes) C.22
15.3 Rims C.23
15.4 Minimum Dual Spacings C.24
16. Sizes on 5° Tapered or Flat-Base Rims – Radial
16.1 Normal Section Sizes – Code Designation C.25
16.2 ‘80’ to ‘100’ Series Metric Designation C.25
16.3 Rims C.26
16.4 Minimum Dual Spacings C.26
17. Free-Rolling (FRT) Sizes
17.1 Radial Sizes on 5° Tapered or Flat-Base Rims C.27
17.2 Radial Sizes on 15° Tapered Rims C.28
17.3 Minimum Dual Spacings C.29
18. Multipurpose Truck Sizes, Metric Designation Radial & Diagonal
18.1 Radial Sizes on 5° Tapered or Flat-Base Rims wide base sizes for multipurpose trucks
C.30
highway, off-the-road and agricultural service
18.2 Rims for free-rolling & multipurpose truck sizes – metric designation radial & diagonal C.31
TRAGFÄHIGKEIT BEI
LOAD VARIATION WITH VARIATION
UNTERSCHIEDLICHER
SPEED CHARGE-VITESSE
GESCHWINDIGKEIT
19. Load/Speed Table for C and CP-Type Tyres sizes C.32
20. Load/Speed Table for all other sizes C.33
21. Notes C.34 to C.36

European Tyre and Rim Technical Organisation – Standards Manual – 2021