Scribd
Upload
119 views

Huawei CFP2 Specs

This document provides specifications for an optical module that operates at 100G using QPSK modulation. Key details include: - It uses the CFP2 form factor and operates over the extended C band from 191.3-196.05 THz. - The module is tunable over 96 channels with 50 GHz spacing and has transmitter power between -10 to 1 dBm. - On the receiver side, it supports wavelengths from 1529-1568 nm with a sensitivity of -18 dBm. - Additional parameters include 100,000 ps/nm dispersion tolerance and 30 ps PMD tolerance.

Uploaded by

Alexander Pischulin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views

Huawei CFP2 Specs

This document provides specifications for an optical module that operates at 100G using QPSK modulation. Key details include: - It uses the CFP2 form factor and operates over the extended C band from 191.3-196.05 THz. - The module is tunable over 96 channels with 50 GHz spacing and has transmitter power between -10 to 1 dBm. - On the receiver side, it supports wavelengths from 1529-1568 nm with a sensitivity of -18 dBm. - Additional parameters include 100,000 ps/nm dispersion tolerance and 30 ps PMD tolerance.

Uploaded by

Alexander Pischulin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

(https://e.huawei.

com/en/)

Optical Module Query Tool

100000ps/nm-Extended C band-Tunable wavelength-100G QPSK(SDFEC2, SLH,


A51)-CFP2 Specifications

Parameter Unit Value

Basic Information
Part number - 03033HBF
100000ps/nm-Extended C band-Tunable wavelength-100G QPSK
Module name -
(SDFEC2, SLH, A51)-CFP2
TN13C1CFP2A51,100G CFP2A51(SLH,SDFEC2,Coherent,Tuna
Description -
ble,Extended C Band,-10dBm-1dBm,-18dBm,Fixed)
Model - TN13C1CFP2A51
Form factor - CFP2
Module type - DWDM
Connector type - LC
Optical fiber type - SMF
Optical line code - 100G QPSK
FEC mode - SDFEC2
Transmission rate bit/s 100G
Transmitter Optical Characteristics
Center frequency THz 191.3～196.05
Center frequency deviation GHz ±1.5
Channel spacing GHz 50
Number of tunable channels C96
Minimum Tx optical power dBm -10
Maximum Tx optical power dBm 1
Default optical power dBm 0.5
Range of the adjustable optical
dBm -10～1
power
Optical power adjustment preci
dB ±1
sion
Max -10dB spectral width nm 50
TX OSNR(in band) dB 35
Receiver Optical Characteristics
Receiver type - PIN
Rx operating wavelength range nm 1529～1568
Rx sensitivity dBm -18
Overload power dBm 0
CD tolerance ps/nm 100000
PMD ps 30
Maximum Reflectance dB -27
SOP tolerance krad/s 628
comment
n the initial state, the center frequency of the module is 196.75 THz. Therefore, before the module works
properly, you need to set the center frequency of the module.

You might also like