PFCA FLANGED SOCKET THIS SHOULD BE DIVIDED BY PVC AND FE???

PFCA FLANGED SOCKET COLUMNS EX TO FB ON FITTING TAKEOFF 1OF2 ARE PVC ONLY??
PFCA FLANGED SOCKET COLUMNS DL TO DV ON FITTING TAKEOFF 1OF2 ARE FE ONLY??

INSERT NON RETURN VALVE NEXT PLAN

INSERT PRESSURE REDUCING VALVE NEXT PLAN

MAPL MARKER POSTS NEEDED FOR OTHERS EXCEPT MAPL?? MARKER POSTS TO BE PUT ON CHAM
FOR THE TIME BEING ONLY MAPL IS COLLECTED

RULES
1 ALL CATEGORIES RECORDED UNDER "T" OR COLUMN "S" IN DESIGN SHEET OVER RIDE HOR
ANY RECORDED IN THE SAME ROW
2 A CHECK FOR 'GV' IS MADE WHENEVER THERE IS A 'WO' AND A MESSAGE BOX SHOWN
3 MSG BOX SHOWN IF 'CU DIST. ' IS REDUCED
4 SAV WORKS NOW.
5 ALL COMBINATIONS ARE ALLOWED IN THE DEVICES COLUMNS EXCEPT THE FOLLOWING
A ENTRY IN 'T' AND 'R' COLUMN IN THE SAME ROW
FOR ALL OTHER COMBINATIONS A REMAINDER MESSAGE BOX IS SHOWN

6 PROGRAM WILL NOT PROCEED IF THE FOLLWING ARE NOT COMPLETE

A BRANCH DN FOR TEE AND CROSSES (INPUT X, X1 AND X2 IN 'T' COLUMN)
B CROSS DIA FOR 'X1' AND 'X2'
C IF LINE DN IS < BRANCH DN FOR TEE
D PIPE DIA DATA IN COLUMN 'DN'

7 PROGRAM WILL SHOW MSGBOX AND INSERT REDUCER MINOR DIA FROM THE NEXT ROW I

8 PROGRAM WILLCHECK AVAILABLE TEE AND REDUCER SIZES AND IF THE REQUIRED COMBINA
LIKE DN100XDN600 THE PROGRAM WILL INSERT THE TWO NEAREST SIZES LIKE DN600X DN200 A
RULES ARE MODIFIED TO ENABLE THIS BY INSERTING EXTRA REDUCERS WHICH WILL NOT BE
PLEASE CHECK THIS SINCE I AM NOT SURE EVERYTHING IS CORRECT
(PROGRAM LOGIC IS CORRECT BUT THE CHOICE MIGHT NOT BE PRACTICAL OR FEASIBLE)

9 SIMILARLY DUE TO ABOVE RULE 'TR' IS NOT REQUIRED SINCE A REDUCER WILL AUTOMATICAL
WHENEVER IT IS NECESSARY. SO CHECK IT AND DELETE 'TR' IF IT IS OK.

10 ALL THE RULES IN THE FITTING-RULES SHEET WORK NOW (ACCORDING TO ME) BUT PLEASE C

11 INPUT TEXT SHEET IS ADDED TO INPUT LINE AND BILL DATA WHICH WILL BE UPDATED BY
UPDATE TEXT SHEET'
THE ABOVE ALSO UPDATES CHARTS AS IN THE HYDRAULIC PROFILE SHEET.
SO THIS CAN BE A START TO AUTOMATE REPORT PREPARATION BY PREPARING A TEMPLA
 NEXT PLAN
NEXT PLAN

ER POSTS TO BE PUT ON CHAMBERS??

DESIGN SHEET OVER RIDE HORIZONTAL BENDS IF THERE ARE

A MESSAGE BOX SHOWN

NS EXCEPT THE FOLLOWING

X IS SHOWN

T' COLUMN)

R DIA FROM THE NEXT ROW IF OKED

ND IF THE REQUIRED COMBINATION IS NOT AVAILABLE

EST SIZES LIKE DN600X DN200 AND DN200X100
EDUCERS WHICH WILL NOT BE RECORDED IF NOT REQUIRED

PRACTICAL OR FEASIBLE)

REDUCER WILL AUTOMATICALLY BE INSERTED

ORDING TO ME) BUT PLEASE CHECK IT OUT

WHICH WILL BE UPDATED BY CLICKING THE

ROFILE SHEET.
ON BY PREPARING A TEMPLATE IN WORD/EXCEL.
 outputs
input data & design parameters
Pipe
Pipe--Take
Takeoff
off
Fitting
Fitting--Rules
Rules
Fitting
Fitting--Take
Take off
off 11
Design 0f
0f 2/OUTPUT
2/OUTPUT
Design

Hydraulic Fitting
Fitting--Take
Takeoff
off 22
Hydraulic Calc
Calc of 2
of 2

Hydraulic
Hydraulic Profile
Profile TB
TB--Take
Take off
off
Input
InputText
Text Lay
Lay --BOQ
BOQ

BOQ_Supply
BOQ_Supply
 ST SD SV

Update
Update Text
Text Return
Return to
toMain
Main

ST L1 Line GRWM
L2 Line Description GRAVITY RAW WATER MAIN
L3 From HULUKA INTAKE
L4 To Raw Water Header Tank
L5 Hydraulic Description HYDRAULIC CALCULATION
L6 Bill -Supply SP-01
L7 Bill -Work CW22
L8 PROFILE HYDRAULIC PROFILE
L9 Line Material Fe
L10 PROFILE uPVC

Parameters
PA Depth to Crown 1.0 m
Contingency 5.0 %
Return
Return to
toMain
Main

LINE NO. Gravity Raw Water Main

P. CU. Ground Pipe Trench Trench Devices Main Line

Point DIST. DIST. X Y Level Dia. depth, Min. Invert level depth Remark PN H-Bend V-bends DAV WO WM T R BF GV DN FD Mat.
0+0 - 0 378,676.54 988,497.20 2,271.00 0.45 0.45 2,270.55 0.45 INTAKE PN 10 T GV 450 450 Fe
0+13 12.6 13 378,670.20 988,508.04 2,269.94 0.45 0.25 2,269.69 0.25 PN 10 30 WO 450 450 Fe
0+30 17 30 378,669.92 988,525.37 2,271.64 0.45 1.45 2,270.19 1.45 PN 10 450 450 Fe
0+51 21 51 378,667.93 988,546.30 2,271.85 0.45 1.66 2,270.19 1.66 PN 10 450 450 Fe
0+81 30 81 378,663.58 988,575.80 2,268.56 0.45 0.45 2,268.11 0.45 PN 10 450 450 Fe
0+109 29 109 378,663.37 988,604.35 2,268.65 0.45 0.64 2,268.01 0.64 PN 10 11.25 450 450 Fe
0+157 48 157 378,672.40 988,651.15 2,267.33 0.45 1.45 2,265.88 1.45 PN 10 22.5 WO 450 450 Fe
0+226 69 226 378,662.30 988,719.39 2,268.32 0.45 0.46 2,267.86 0.46 PN 10 11.25 450 450 Fe
0+254 29 254 378,650.57 988,745.38 2,271.63 0.45 3.77 2,267.86 3.77 PN 10 45 450 450 Fe
0+272 17 272 378,634.62 988,751.47 2,270.71 0.45 2.85 2,267.86 2.85 PN 10 450 450 Fe
0+310 39 310 378,600.62 988,770.15 2,271.82 0.45 4.06 2,267.76 4.06 PN 10 22.5 450 450 Fe
0+327 16 327 378,590.22 988,782.59 2,270.61 0.45 2.95 2,267.66 2.95 PN 10 11.25 450 450 Fe
0+348 22 348 378,580.81 988,802.05 2,270.48 0.45 2.82 2,267.66 2.82 PN 10 450 450 Fe
0+389 40 389 378,557.22 988,834.97 2,270.57 0.45 2.95 2,267.62 2.95 PN 10 450 450 Fe
0+408 19 408 378,544.08 988,849.04 2,271.30 0.45 3.68 2,267.62 3.68 PN 10 22.5 450 450 Fe
0+425 17 425 378,529.04 988,857.34 2,273.81 0.45 6.45 2,267.36 6.45 PN 10 30 450 450 Fe
0+488 63 488 378,466.12 988,860.27 2,273.77 0.45 6.45 2,267.32 6.45 PN 10 450 450 Fe
0+556 68 556 378,399.77 988,873.81 2,271.59 0.45 4.45 2,267.14 4.45 PN 10 11.25 450 450 Fe
0+604 48 604 378,356.94 988,895.55 2,268.79 0.45 1.65 2,267.14 1.65 PN 10 45 450 450 Fe
0+696 92 696 378,350.13 988,987.40 2,267.91 0.45 1.45 2,266.46 1.45 PN 10 45 450 450 Fe
0+739 43 739 378,314.07 989,010.75 2,267.50 0.45 1.45 2,266.05 1.45 PN 10 22.5 450 450 Fe
0+784 45 784 378,269.12 989,017.27 2,267.90 0.45 2.05 2,265.85 2.05 PN 10 11.25 450 450 Fe
0+801 17 801 378,253.28 989,023.46 2,267.20 0.45 1.45 2,265.75 1.45 PN 10 30 450 450 Fe
0+811 10 811 378,246.56 989,030.63 2,267.20 0.45 1.45 2,265.75 1.45 PN 10 30 450 450 Fe
0+845 34 845 378,236.25 989,062.77 2,266.12 0.45 1.45 2,264.67 1.45 PN 10 450 450 Fe
0+883 38 883 378,220.99 989,097.82 2,264.40 0.45 1.45 2,262.95 1.45 PN 10 450 450 Fe
0+913 30 913 378,218.66 989,128.00 2,264.80 0.45 1.45 2,262.95 1.45 PN 10 450 450 Fe

Design 6
 Connection
B/P/D/C DN DN0 Description /Remark

0.5292
0.0162
0.0948
0.1464
0.0074
-0.1906
0.1469
0.4240
1.2061
1.0684
0.6963
0.4504
0.6218
0.7512
1.0665
1.5243
1.3695
1.1011
0.0740
0.9962
1.4268
1.1983
0.7530
0.3104
0.4106
0.4106

Design 7
 Defelaction Horizontal Horizontal Bends Slope gradient gradient diagonal dist composite angle
partial combined angle 11.25 22.5 30 45 90 11.5+45 22.5+45 % i angle P.DIST. CU.DIST. grad
0.0 0.0
0.513 30.32 29.4 150.6 0 0 1 0 0 0 0 6.8 0.0685 0.0684 12.6 12.6 0.10
-0.079 0.93 -4.5 - 0 0 0 0 0 0 0 -2.9 -0.0288 -0.0288 17.3 29.9 0.03
-0.052 5.43 -3.0 - 0 0 0 0 0 0 0 0.0 0.0000 0.0000 21.0 51.0 0.07
0.139 8.39 8.0 - 0 0 0 0 0 0 0 7.0 0.0698 0.0696 29.9 80.8 0.07
0.198 0.42 11.3 168.7 1 0 0 0 0 0 0 0.4 0.0035 0.0035 28.6 109.4 0.04
-0.338 -10.92 -19.3 160.7 0 1 0 0 0 0 0 4.5 0.0447 0.0447 47.7 157.1 0.01
-0.277 8.42 -15.9 164.1 1 0 0 0 0 0 0 -2.9 -0.0287 -0.0287 69.0 226.1 0.07
-0.782 24.29 -44.8 135.2 0 0 0 1 0 0 0 0.0 0.0000 0.0000 28.5 254.6 0.06
0.138 69.10 7.9 - 0 0 0 0 0 0 0 0.0 0.0000 0.0000 17.1 271.7 0.00
0.372 61.22 21.3 158.7 0 1 0 0 0 0 0 0.3 0.0026 0.0026 38.8 310.5 0.00
0.246 39.90 14.1 165.9 1 0 0 0 0 0 0 0.6 0.0062 0.0062 16.2 326.7 0.01
-0.171 25.81 -9.8 - 0 0 0 0 0 0 0 0.0 0.0000 0.0000 21.6 348.3 0.00
-0.129 35.62 -7.4 - 0 0 0 0 0 0 0 0.1 0.0010 0.0010 40.5 388.8 0.00
-0.315 43.04 -18.1 161.9 0 1 0 0 0 0 0 0.0 0.0000 0.0000 19.3 408.1 0.00
-0.458 61.11 -26.2 153.8 0 0 1 0 0 0 0 1.5 0.0151 0.0151 17.2 425.3 0.02
0.155 87.33 8.9 - 0 0 0 0 0 0 0 0.1 0.0006 0.0006 63.0 488.2 0.00
0.268 78.47 15.4 164.6 1 0 0 0 0 0 0 0.3 0.0027 0.0027 67.7 556.0 0.00
1.027 63.09 58.8 121.2 0 0 0 1 0 1 0 0.0 0.0000 0.0000 48.0 604.0 0.00
-0.922 4.24 -52.8 127.2 0 0 0 1 0 0 0 0.7 0.0074 0.0074 92.1 696.1 0.01
-0.431 57.08 -24.7 155.3 0 1 0 0 0 0 0 1.0 0.0095 0.0095 43.0 739.1 0.01
0.228 81.75 13.1 166.9 1 0 0 0 0 0 0 0.4 0.0044 0.0044 45.4 784.5 0.00
0.445 68.66 25.5 154.5 0 0 1 0 0 0 0 0.6 0.0059 0.0059 17.0 801.5 0.01
0.443 43.14 25.4 154.6 0 0 1 0 0 0 0 0.0 0.0000 0.0000 9.8 811.3 0.00
-0.100 17.79 -5.7 - 0 0 0 0 0 0 0 3.2 0.0320 0.0320 33.8 845.1 0.03
0.000 23.53 0.0 - 0 0 0 0 0 0 0 4.5 0.0450 0.0450 38.3 883.4 0.04
0.000 23.53 0.0 - 0 0 0 0 0 0 0 5.7 0.0568 0.0568 30.3 875.4 0.06

Design 8
 Depth Band Total De Check?
composite angle Vertical Bends Restrained 0.00 1.50 2.00 2.50 3.00 4.00 5.00 6.00 (1=Ok)
degree 11.25 22.5 30 45 90 Joint Length <depth <depth Diff 1.50 2.00 2.50 3.00 4.00 5.00 6.00 7.00 (0=Panic)
0 0 0 0 0 0
5.6 0 0 0 0 0 0 12.6 0.25 0.45 0.20 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.20 OK!
0 0 0 0 0 0 0 17.3 0.25 1.45 1.20 1.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.20 OK!
0 0 0 0 0 0 0 21.0 1.45 1.66 0.21 0.05 0.16 0.00 0.00 0.00 0.00 0.00 0.00 0.21 OK!
0 0 0 0 0 0 0 29.9 0.45 1.66 1.21 1.05 0.16 0.00 0.00 0.00 0.00 0.00 0.00 1.21 OK!
0 0 0 0 0 0 0 28.6 0.45 0.64 0.19 0.19 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.19 OK!
0 0 0 0 0 0 0 47.7 0.64 1.45 0.81 0.81 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.81 OK!
0 0 0 0 0 0 0 69.0 0.46 1.45 0.99 0.99 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.99 OK!
0 0 0 0 0 0 0 28.5 0.46 3.77 3.31 1.04 0.50 0.50 0.50 0.77 0.00 0.00 0.00 3.31 OK!
0 0 0 0 0 0 0 17.1 2.85 3.77 0.92 0.00 0.00 0.00 0.15 0.77 0.00 0.00 0.00 0.92 OK!
0 0 0 0 0 0 0 38.8 2.85 4.06 1.21 0.00 0.00 0.00 0.15 1.00 0.06 0.00 0.00 1.21 OK!
0 0 0 0 0 0 0 16.2 2.95 4.06 1.11 0.00 0.00 0.00 0.05 1.00 0.06 0.00 0.00 1.11 OK!
0 0 0 0 0 0 0 21.6 2.82 2.95 0.13 0.00 0.00 0.00 0.13 0.00 0.00 0.00 0.00 0.13 OK!
0 0 0 0 0 0 0 40.5 2.82 2.95 0.13 0.00 0.00 0.00 0.13 0.00 0.00 0.00 0.00 0.13 OK!
0 0 0 0 0 0 0 19.3 2.95 3.68 0.73 0.00 0.00 0.00 0.05 0.68 0.00 0.00 0.00 0.73 OK!
0 0 0 0 0 0 0 17.2 3.68 6.45 2.77 0.00 0.00 0.00 0.00 0.32 1.00 1.00 0.45 2.77 OK!
0 0 0 0 0 0 0 63.0 6.45 6.45 6.45 0.00 0.00 0.00 0.00 0.00 0.00 0.00 6.45 6.45 OK!
0 0 0 0 0 0 0 67.7 4.45 6.45 2.00 0.00 0.00 0.00 0.00 0.00 0.55 1.00 0.45 2.00 OK!
0 0 0 0 0 0 0 48.0 1.65 4.45 2.80 0.00 0.35 0.50 0.50 1.00 0.45 0.00 0.00 2.80 OK!
0 0 0 0 0 0 0 92.1 1.45 1.65 0.20 0.05 0.15 0.00 0.00 0.00 0.00 0.00 0.00 0.20 OK!
0 0 0 0 0 0 0 43.0 1.45 1.45 1.45 1.45 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.45 OK!
0 0 0 0 0 0 0 45.4 1.45 2.05 0.60 0.05 0.50 0.05 0.00 0.00 0.00 0.00 0.00 0.60 OK!
0 0 0 0 0 0 0 17.0 1.45 2.05 0.60 0.05 0.50 0.05 0.00 0.00 0.00 0.00 0.00 0.60 OK!
0 0 0 0 0 0 0 9.8 1.45 1.45 1.45 1.45 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.45 OK!
0 0 0 0 0 0 0 33.8 1.45 1.45 1.45 1.45 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.45 OK!
0 0 0 0 0 0 0 38.3 1.45 1.45 1.45 1.45 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.45 OK!
0 0 0 0 0 0 0 30.3 1.45 1.45 1.45 1.45 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1.45 OK!

Design 9
 Pipe length (m) / Depth band (m) Total Trench Total
0.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 Length Width Volume
1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 m m m3 Layout
378676.54,988497.2
12.59 0.00 0.00 0.00 0.00 0.00 0.00 0.00 12.59 0.90 3.97 378670.2,988508.04
17.34 0.00 0.00 0.00 0.00 0.00 0.00 0.00 17.34 0.90 13.26 378669.92,988525.37
5.01 16.02 0.00 0.00 0.00 0.00 0.00 0.00 21.02 0.90 29.42 378667.93,988546.3
25.94 3.95 0.00 0.00 0.00 0.00 0.00 0.00 29.89 0.90 28.38 378663.58,988575.8
28.55 0.00 0.00 0.00 0.00 0.00 0.00 0.00 28.55 0.90 14.00 378663.37,988604.35
47.71 0.00 0.00 0.00 0.00 0.00 0.00 0.00 47.71 0.90 44.87 378672.4,988651.15
69.01 0.00 0.00 0.00 0.00 0.00 0.00 0.00 69.01 0.90 59.32 378662.3,988719.39
8.96 4.31 4.31 4.31 6.63 0.00 0.00 0.00 28.51 0.90 54.28 378650.57,988745.38
0.00 0.00 0.00 2.78 14.29 0.00 0.00 0.00 17.07 0.90 50.86 378634.62,988751.47
0.00 0.00 0.00 4.81 32.06 1.92 0.00 0.00 38.79 0.90 120.63 378600.62,988770.15
0.00 0.00 0.00 0.73 14.61 0.88 0.00 0.00 16.21 0.90 51.15 378590.22,988782.59
0.00 0.00 0.00 21.62 0.00 0.00 0.00 0.00 21.62 0.90 56.13 378580.81,988802.05
0.00 0.00 0.00 40.50 0.00 0.00 0.00 0.00 40.50 0.90 105.16 378557.22,988834.97
0.00 0.00 0.00 1.32 17.93 0.00 0.00 0.00 19.25 0.90 57.44 378544.08,988849.04
0.00 0.00 0.00 0.00 1.98 6.20 6.20 2.79 17.18 0.90 78.32 378529.04,988857.34
0.00 0.00 0.00 0.00 0.00 0.00 0.00 62.99 62.99 0.90 365.65 378466.12,988860.27
0.00 0.00 0.00 0.00 0.00 18.62 33.86 15.24 67.72 0.90 332.16 378399.77,988873.81
0.00 6.00 8.58 8.58 17.15 7.72 0.00 0.00 48.03 0.90 131.85 378356.94,988895.55
23.03 69.08 0.00 0.00 0.00 0.00 0.00 0.00 92.10 0.90 128.49 378350.13,988987.4
42.96 0.00 0.00 0.00 0.00 0.00 0.00 0.00 42.96 0.90 56.07 378314.07,989010.75
3.79 37.85 3.79 0.00 0.00 0.00 0.00 0.00 45.42 0.90 71.54 378269.12,989017.27
1.42 14.17 1.42 0.00 0.00 0.00 0.00 0.00 17.01 0.90 26.79 378253.28,989023.46
9.83 0.00 0.00 0.00 0.00 0.00 0.00 0.00 9.83 0.90 12.82 378246.56,989030.63
33.77 0.00 0.00 0.00 0.00 0.00 0.00 0.00 33.77 0.90 44.07 378236.25,989062.77
38.27 0.00 0.00 0.00 0.00 0.00 0.00 0.00 38.27 0.90 49.94 378220.99,989097.82
30.32 0.00 0.00 0.00 0.00 0.00 0.00 0.00 30.32 0.90 39.57 378220.99,989097.82

Design 10
 Profile
GL Invert Level
0,22710 0,22705.5
12.56,22699.4 12.56,22696.9
29.89,22716.4 29.89,22701.9
50.91,22718.5 50.91,22701.9
80.73,22685.6 80.73,22681.1
109.28,22686.5 109.28,22680.1
156.95,22673.3 156.95,22658.8
225.93,22683.2 225.93,22678.6
254.45,22716.3 254.45,22678.6
271.52,22707.1 271.52,22678.6
310.31,22718.2 310.31,22677.6
326.53,22706.1 326.53,22676.6
348.14,22704.8 348.14,22676.6
388.64,22705.7 388.64,22676.2
407.89,22713 407.89,22676.2
425.07,22738.1 425.07,22673.6
488.06,22737.7 488.06,22673.2
555.78,22715.9 555.78,22671.4
603.81,22687.9 603.81,22671.4
695.91,22679.1 695.91,22664.6
738.87,22675 738.87,22660.5
784.29,22679 784.29,22658.5
801.3,22672 801.3,22657.5
811.12,22672 811.12,22657.5
844.88,22661.2 844.88,22646.7
883.11,22644 883.11,22629.5
913.38,22644 913.38,22629.5

Design 11
 Return
Returnto
to Main
Main
HYDRAULIC CALCULATION OF GRWM
Section Flow, Q Dia
CHAINAGE Length Invert Level HGL 1 m /day
3
m /s
3
L /s
3
ND mm
- - 2270.55 2270.55 15,552 0.180 180 450 450
13 13 2269.69 2270.51 15,552 0.180 180 450 450
30 17 2270.19 2270.46 15,552 0.180 180 450 450
51 21 2270.19 2270.39 15,552 0.180 180 450 450
81 30 2268.11 2270.30 15,552 0.180 180 450 450
109 29 2268.01 2270.21 15,552 0.180 180 450 450
157 48 2265.88 2270.06 15,552 0.180 180 450 450
226 69 2267.86 2269.85 15,552 0.180 180 450 450
254 29 2267.86 2269.76 15,552 0.180 180 450 450
272 17 2267.86 2269.71 15,552 0.180 180 450 450
310 39 2267.76 2269.59 15,552 0.180 180 450 450
327 16 2267.66 2269.53 15,552 0.180 180 450 450
348 22 2267.66 2269.47 15,552 0.180 180 450 450
389 40 2267.62 2269.34 15,552 0.180 180 450 450
408 19 2267.62 2269.28 15,552 0.180 180 450 450
425 17 2267.36 2269.23 15,552 0.180 180 450 450
488 63 2267.32 2269.03 15,552 0.180 180 450 450
556 68 2267.14 2268.82 15,552 0.180 180 450 450
604 48 2267.14 2268.67 15,552 0.180 180 450 450
696 92 2266.46 2268.39 15,552 0.180 180 450 450
739 43 2266.05 2268.25 15,552 0.180 180 450 450
784 45 2265.85 2268.11 15,552 0.180 180 450 450
801 17 2265.75 2268.06 15,552 0.180 180 450 450
811 10 2265.75 2268.03 15,552 0.180 180 450 450
845 34 2264.67 2267.92 15,552 0.180 180 450 450
883 38 2262.95 2267.80 15,552 0.180 180 450 450
913 30 2262.95 2267.71 15,552 0.180 180 450 450
nnto
to Main
Main

Dia Velovity HWC HL unit head loss Pressure Remark

m m/s m m/10³ m PN Material
0.45 1.14 120 0 0.0031 0.0 PN 10 Fe INTAKE
0.45 1.14 120 0.04 0.0031 0.8 PN 10 Fe
0.45 1.14 120 0.05 0.0031 0.3 PN 10 Fe
0.45 1.14 120 0.07 0.0031 0.2 PN 10 Fe
0.45 1.14 120 0.09 0.0031 2.2 PN 10 Fe
0.45 1.14 120 0.09 0.0031 2.2 PN 10 Fe
0.45 1.14 120 0.15 0.0031 4.2 PN 10 Fe
0.45 1.14 120 0.21 0.0031 2.0 PN 10 Fe
0.45 1.14 120 0.09 0.0031 1.9 PN 10 Fe
0.45 1.14 120 0.05 0.0031 1.8 PN 10 Fe
0.45 1.14 120 0.12 0.0031 1.8 PN 10 Fe
0.45 1.14 120 0.05 0.0031 1.9 PN 10 Fe
0.45 1.14 120 0.07 0.0031 1.8 PN 10 Fe
0.45 1.14 120 0.13 0.0031 1.7 PN 10 Fe
0.45 1.14 120 0.06 0.0031 1.7 PN 10 Fe
0.45 1.14 120 0.05 0.0031 1.9 PN 10 Fe
0.45 1.14 120 0.20 0.0031 1.7 PN 10 Fe
0.45 1.14 120 0.21 0.0031 1.7 PN 10 Fe
0.45 1.14 120 0.15 0.0031 1.5 PN 10 Fe
0.45 1.14 120 0.29 0.0031 1.9 PN 10 Fe
0.45 1.14 120 0.13 0.0031 2.2 PN 10 Fe
0.45 1.14 120 0.14 0.0031 2.3 PN 10 Fe
0.45 1.14 120 0.05 0.0031 2.3 PN 10 Fe
0.45 1.14 120 0.03 0.0031 2.3 PN 10 Fe
0.45 1.14 120 0.10 0.0031 3.3 PN 10 Fe
0.45 1.14 120 0.12 0.0031 4.9 PN 10 Fe
0.45 1.14 120 0.09 0.0031 4.8 PN 10 Fe
Return
Return to
toMain
Main

RAW WATER GRAVITY MAIN - GWRM-1 to GRWM-26:- Fro

2272.00

2270.00

2268.00

2266.00

2264.00

2262.00

2260.00

2258.00
E
AG - 13 30 51 8 1 10 9 1 5 7 2 2 6 2 5 4 2 7 2 31 0 32 7 34 8 3 8 9 4 0 8 42 5 48 8 55 6 60
N
AI
CH
Invert Level HGL 1
1 to GRWM-26:- From INTAKE

9 8 5 8 6 4 6 9 4 1 1 5 3 3
38 40 42 48 55 60 69 73 78 80 81 84 88 91

HGL 1
 ST VC FE

Return
Return to
toMain
Main

Chambers Device Dia Dia Dia Dia

ST VB1 Valve Box WO WO Washout 80 100 150 200
VB2 Valve Box FH 80x80 100x80 150x80 200x80
VC1 Valve Chambers 1.2x1.2 80 80 80 80
VC2 Valve Chambers 1.4x1.2 80 80 80 80
VC3 Valve Chambers 1.6x1.2 80 80 80 80
VC4 Valve Chambers 1.8x1.4 80 80 80 80
VC5 Valve Chambers 1.5 x 1.2 80 80 80 80
VC6 Valve Chambers 1.8 x 1.2 VB1 VB1 VB1 VB1
GV Isolating 80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
80 80 80 80
VC1 VC1 VC1 VC1
DAV Air Valve 80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
80x80 100x80 150x100 200x100
80x50 80x50 100x50 100x50
50 50 50 50
VC1 VC1 VC1 VC1
301A T Tee 80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
MM MM MM MM
CC CC CC CC
VC1 VC1 VC1 VC1
302B TBF T with Blan 80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
MM MM MM MM
MM MM MM MM
CC CC CC CC
CC CC CC CC
CC CC CC CC
CC CC CC CC
VC1 VC1 VC1 VC1
304A TE T to Existi 80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
MR MR MR MR
MR MR MR MR
 CC CC CC CC
CC CC CC CC
CC CC CC CC
CC CC CC CC
CC CC CC CC
VC1 VC1 VC1 VC1
TR Tee-Reduc 80 100 150 200
80 100 150 200
80x80 100x100 150x150 200x200
MM MM MM MM
CC CC CC CC
CC CC CC CC
CC CC CC CC
CC CC CC CC
VC1 VC1 VC1 VC1
302A TS T from Exi 80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
80x80 100x100 150x150 200x200
MM MM MM MM
CC CC CC CC
CC CC CC CC
CC CC CC CC
CC CC CC CC
CC CC CC CC
VC1 VC1 VC1 VC1
SAV Air Valve 80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
80x80 100x80 150x100 200x100
80x50 80x50 100x50 100x50
50 50 50 50
VC1 VC1 VC1 VC1
R Reducer 80 100 150 200
80 100 150 200
MM MM MM MM
CC CC CC CC
CC CC CC CC
CC CC CC CC
VC1 VC1 VC1 VC1
WM Water Met 80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
0.8m 1m 1.5m 2m
80 100 150 200
VC1 VC1 VC1 VC1
201A B Bend 80 100 150 200
PL PL PL PL
FH Fire Hydra 80 100 150 200
80 100 150 200
80 100 150 200
80x80 100x80 150x80 200x80

80 80 80 80
80 80 80 80
VB2 VB2 VB2 VB2
402A X Cross 80 100 150 200
80 100 150 200
80x80 100x100 150x150 200x200
MM MM MM MM
MM MM MM MM
CC CC CC CC
CC CC CC CC
CC CC CC CC
CC CC CC CC
VC1 VC1 VC1 VC1
X1 Crossing m 80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
CR CR CR CR
CR CR CR CR
CM CM CM CM
CM CM CM CM
CC CC CC CC
CC CC CC CC
CC CC CC CC
CC CC CC CC
VC1 VC1 VC1 VC1
X2 Crossing E 80 100 150 200
80 100 150 200
80 100 150 200
80 100 150 200
CR CR CR CR
CR CR CR CR
CM CM CM CM
CM CM CM CM
CC CC CC CC
CC CC CC CC
CC CC CC CC
CC CC CC CC
CZ CZ CZ CZ
CC CC CC CC
CC CC CC CC
CC CC CC CC
CC CC CC CC
CC CC CC CC
VC1 VC1 VC1 VC1
BKFG BLANK F 80 100 150 200
80 100 150 200
 CO

Dia Dia Dia Dia Dia Dia Dia Mat item Code
250 300 350 400 450 500 600 Fe 1 FVJA
250x80 300x80 350x150 400x200 450x200 500x200 600x200 Fe 2 FFIT
80 80 150 200 200 200 200 Fe 3 FFS3
80 80 150 200 200 200 200 Fe 4 PPE1
80 80 150 200 200 200 200 Fe 5 FVJA
80 80 150 200 200 200 200 Fe 6 FFP1
80 80 150 200 200 200 200 Fe 7 FFGV
VB1 VB1 VB1 VB1 VB1 VB1 VB1 Fe 8 CHMB
250 300 350 400 450 500 600 Fe 1 FVJA
250 300 350 400 450 500 600 Fe 2 FFP1
250 300 350 400 450 500 600 Fe 3 FPE2
250 300 350 400 450 500 600 Fe 4 FFAD
80 80 150 200 200 200 200 Fe 5 FFGV
VC2 VC2 VC2 VC2 VC3 VC3 VC3 Fe 6 CHMB
250 300 350 400 450 500 600 Fe 1 FVJA
250 300 350 400 450 500 600 Fe 2 FFS1
250 300 350 400 450 500 600 Fe 3 FPE1
250 300 350 400 450 500 600 Fe 4 FFAD
250x200 300x200 350x200 400x200 450x200 500x200 600x200 Fe 5 FFAT
200x50 200x50 200x50 200x80 200x80 200x80 200x80 Fe 6 FFCT
50 50 50 80 80 80 80 Fe 7 DOAV
VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 8 CHMB
250 300 350 400 450 500 600 Fe 1 PFCA
250 300 350 400 450 500 600 Fe 2 FFP1
250 300 350 400 450 500 600 Fe 3 FFAD
250 300 350 400 450 500 600 Fe 4 FFGV
250 300 350 400 450 500 600 Fe 5 FVJA
MM MM MM MM MM MM MM Fe 6 FFAT
CC CC CC CC CC CC CC Fe 7 BKFG
VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 8 CHMB
250 300 350 400 450 500 600 Fe 1 FFAD
250 300 350 400 450 500 600 Fe 2 FFGV
250 300 350 400 450 500 600 Fe 3 BKFG
250 300 350 400 450 500 600 Fe 4 FVJA
250 300 350 400 450 500 600 Fe 5 FFP1
MM MM MM MM MM MM MM Fe 6 FFAT
MM MM MM MM MM MM MM Fe 7 FFCT
CC CC CC CC CC CC CC Fe 8 FFGV
CC CC CC CC CC CC CC Fe 9 FFP1
CC CC CC CC CC CC CC Fe 10 FFAD
CC CC CC CC CC CC CC Fe 11 FVJA
VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 12 CHMB
250 300 350 400 450 500 600 Fe 1 FFAD
250 300 350 400 450 500 600 Fe 2 FFGV
250 300 350 400 450 500 600 Fe 3 FVJA
250 300 350 400 450 500 600 Fe 4 FFP1
MR MR MR MR MR MR MR Fe 5 FFAT
MR MR MR MR MR MR MR Fe 6 FFCT
 CC CC CC CC CC CC CC Fe 7 FFGV
CC CC CC CC CC CC CC Fe 8 FFP1
CC CC CC CC CC CC CC Fe 9 FFAD
CC CC CC CC CC CC CC Fe 10 FVJA
CC CC CC CC CC CC CC Fe 11 PFCA
VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 12 CHMB
250 300 350 400 450 500 600 Fe 1 PFCA
250 300 350 400 450 500 600 Fe 2 BKFG
250x250 300x300 350x350 400x400 450x450 500x500 600x600 Fe 3 FFAT
MM MM MM MM MM MM MM Fe 4 FFCT
CC CC CC CC CC CC CC Fe 5 FFGV
CC CC CC CC CC CC CC Fe 6 FFP1
CC CC CC CC CC CC CC Fe 7 FFAD
CC CC CC CC CC CC CC Fe 8 FVJA
VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 9 CHMB
250 300 350 400 450 500 600 Fe 1 FVJA
250 300 350 400 450 500 600 Fe 2 FFP1
250 300 350 400 450 500 600 Fe 3 FFGV
250 300 350 400 450 500 600 Fe 4 FFAD
250 300 350 400 450 500 600 Fe 5 PFCA
250x250 300x300 350x350 400x400 450x450 500x500 600x600 Fe 6 FFAT
MM MM MM MM MM MM MM Fe 7 FFCT
CC CC CC CC CC CC CC Fe 8 FFGV
CC CC CC CC CC CC CC Fe 9 FFAD
CC CC CC CC CC CC CC Fe 10 FFP1
CC CC CC CC CC CC CC Fe 11 PFCA
CC CC CC CC CC CC CC Fe 12 FVJA
VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 13 CHMB
250 300 350 400 450 500 600 Fe 1 FVJA
250 300 350 400 450 500 600 Fe 2 FFS1
250 300 350 400 450 500 600 Fe 3 FPE1
250 300 350 400 450 500 600 Fe 4 FFAD
250x200 300x200 350x200 400x200 450x200 500x200 600x200 Fe 5 FFAT
200x50 200x50 200x50 200x80 200x80 200x80 200x80 Fe 6 FFCT
50 50 50 80 80 80 80 Fe 7 SOAV
VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 8 CHMB
250 300 350 400 450 500 600 Fe 1 FVJA
250 300 350 400 450 500 600 Fe 2 FFP1
MM MM MM MM MM MM MM Fe 3 FFCT
CC CC CC CC CC CC CC Fe 4 FFGV
CC CC CC CC CC CC CC Fe 5 FFAD
CC CC CC CC CC CC CC Fe 6 FPE2
VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 7 CHMB
250 300 350 400 450 500 600 Fe 1 FVJA
250 300 350 400 450 500 600 Fe 2 FFP1
250 300 350 400 450 500 600 Fe 3 FFGV
250 300 350 400 450 500 600 Fe 4 FFAD
250 300 350 400 450 500 600 Fe 5 FSWM
2.5m 3m 3.5m 4m 4.5m 5m 6m Fe 6 FFP3
250 300 350 400 450 500 600 Fe 7 FFWM
VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 8 CHMB
 250 300 350 400 450 500 600 Fe 1 FSSB
PL PL PL PL PL PL PL Fe 2 MAPL
250 300 350 400 450 500 600 Fe 1 PFCA
250 300 350 400 450 500 600 Fe 2 FFAD
250 300 350 400 450 500 600 Fe 3 FVJA
250x80 300x80 350x150 400x200 450x200 500x200 600x200 Fe 4 FFAT
150x80 200x80 200x80 200x80 200x80 Fe 5 FFCT
80 80 80 80 80 80 80 Fe 6 FFP2
80 80 80 80 80 80 80 Fe 7 FH80
VB2 VB2 VB2 VB2 VB2 VB2 VB2 Fe 8 CHMB
250 300 350 400 450 500 600 Fe 1 PFCA
250 300 350 400 450 500 600 Fe 2 BKFG
250x250 300x300 350x350 400x400 450x450 500x500 600x600 Fe 3 FFCR
MM MM MM MM MM MM MM Fe 4 FFCT
MM MM MM MM MM MM MM Fe 5 FFCT
CC CC CC CC CC CC CC Fe 6 FFP1
CC CC CC CC CC CC CC Fe 7 FFGV
CC CC CC CC CC CC CC Fe 8 FFAD
CC CC CC CC CC CC CC Fe 9 FVJA
VC2 VC2 VC2 VC2 VC3 VC3 VC3 Fe 10 CHMB
250 300 350 400 450 500 600 Fe 1 FFAD
250 300 350 400 450 500 600 Fe 2 FFP1
250 300 350 400 450 500 600 Fe 3 FFGV
250 300 350 400 450 500 600 Fe 4 FVJA
CR CR CR CR CR CR CR Fe 5 FFCT
CR CR CR CR CR CR CR Fe 6 FFCT
CM CM CM CM CM CM CM Fe 7 FFCT
CM CM CM CM CM CM CM Fe 8 FFCT
CC CC CC CC CC CC CC Fe 9 FFP1
CC CC CC CC CC CC CC Fe 10 FVJA
CC CC CC CC CC CC CC Fe 11 FFGV
CC CC CC CC CC CC CC Fe 12 FFAD
VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 13 CHMB
250 300 350 400 450 500 600 Fe 1 FFAD
250 300 350 400 450 500 600 Fe 2 FFGV
250 300 350 400 450 500 600 Fe 3 FFS1
250 300 350 400 450 500 600 Fe 4 FVJA
CR CR CR CR CR CR CR Fe 5 FFCT
CR CR CR CR CR CR CR Fe 6 FFCT
CM CM CM CM CM CM CM Fe 7 FFCT
CM CM CM CM CM CM CM Fe 8 FFCT
CC CC CC CC CC CC CC Fe 9 FFGV
CC CC CC CC CC CC CC Fe 10 FFAD
CC CC CC CC CC CC CC Fe 11 FFP1
CC CC CC CC CC CC CC Fe 12 FVJA
CZ CZ CZ CZ CZ CZ CZ Fe 13 FFCR
CC CC CC CC CC CC CC Fe 14 FFP1
CC CC CC CC CC CC CC Fe 15 FFGV
CC CC CC CC CC CC CC Fe 16 FFAD
CC CC CC CC CC CC CC Fe 17 PFCA
CC CC CC CC CC CC CC Fe 18 FVJA
VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 19 CHMB
250 300 350 400 450 500 600 Fe 1 PFCA
250 300 350 400 450 500 600 Fe 2 BKFG
DE UPVC

description Qunt Device Dia Dia

COLLAR 0 WO Washout 80 100
DOUBLE SOCKET LEVEL INVERT TEE WITH FLANGED BRANCH 1 80x80 100x80
FLANGED SPIGOT 2 80 80
uPVC PIPE 1000mm LONG 1 80 80
COLLAR 1 80 80
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 1 80 80
ALL FLANGED GATE VALVE 1 80 80
CHAMBER 1 VB1 VB1
COLLAR 2 GV Isolating Val 80 100
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 1 80 100
DOUBLE SPIGOT PIPE WITH PUDDLE 1200mm LONG 1 80 100
FLANGE ADAPTOR 1 80 100
ALL FLANGED GATE VALVE 1 80 80
CHAMBER 1 VC1 VC1
COLLAR 2 DAV Air Valve 80 100
FLANGED SPIGOT FERROUS PIPE 1000mm LONG 1 80 100
DOUBLE SPIGOT PIPE 1000mm LONG 1 80 100
FLANGE ADAPTOR 1 80 100
ALL FLANGED TEE 1 80x80 100x80
ALL FLANGED CONCENTRIC TAPER 1 80x50 80x50
DOUBLE ORIFICE AIR VALVE WITH BUILT IN ISOLATING VALVE 1 50 50
CHAMBER 1 VC1 VC1
FLANGED SOCKET 1 T Tee 80 100
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 80 100
FLANGE ADAPTOR 1 80 100
ALL FLANGED GATE VALVE 1 80 100
COLLAR 2 80 100
ALL FLANGED TEE 1 MM MM
BLANK FLANGE 1 CC CC
CHAMBER 1 VC1 VC1
FLANGE ADAPTOR 1 TBF T with Blank 80 100
ALL FLANGED GATE VALVE 1 80 100
BLANK FLANGE 1 80 100
COLLAR 1 80 100
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 80 100
ALL FLANGED TEE 1 MM MM
ALL FLANGED CONCENTRIC TAPER 1 MM MM
ALL FLANGED GATE VALVE 1 CC CC
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 CC CC
FLANGE ADAPTOR 1 CC CC
COLLAR 1 CC CC
CHAMBER 2 VC1 VC1
FLANGE ADAPTOR 1 TE T to Existing 80 100
ALL FLANGED GATE VALVE 1 80 100
COLLAR 1 80 100
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 80 100
ALL FLANGED TEE 1 MR MR
ALL FLANGED CONCENTRIC TAPER 1 MR MR
ALL FLANGED GATE VALVE 1 CC CC
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 CC CC
FLANGE ADAPTOR 1 CC CC
COLLAR 1 CC CC
FLANGED SOCKET 1 CC CC
CHAMBER 2 VC1 VC1
FLANGED SOCKET 1 TR Tee-Reducer 80 100
BLANK FLANGE 1 80 100
ALL FLANGED TEE 1 80x80 100x100
ALL FLANGED CONCENTRIC TAPER 1 MM MM
ALL FLANGED GATE VALVE 1 CC CC
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 CC CC
FLANGE ADAPTOR 1 CC CC
COLLAR 1 CC CC
CHAMBER 1 VC1 VC1
COLLAR 1 TS T from Existi 80 100
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 80 100
ALL FLANGED GATE VALVE 1 80 100
FLANGE ADAPTOR 1 80 100
FLANGED SOCKET 1 80 100
ALL FLANGED TEE 1 80x80 100x100
ALL FLANGED CONCENTRIC TAPER 1 MM MM
ALL FLANGED GATE VALVE 1 CC CC
FLANGE ADAPTOR 1 CC CC
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 CC CC
FLANGED SOCKET 1 CC CC
COLLAR 1 CC CC
CHAMBER 2 VC1 VC1
COLLAR 1 SAV Air Valve 80 100
FLANGED SPIGOT FERROUS PIPE 1000mm LONG 1 80 100
DOUBLE SPIGOT PIPE 1000mm LONG 1 80 100
FLANGE ADAPTOR 1 80 100
ALL FLANGED TEE 1 80x80 100x80
ALL FLANGED CONCENTRIC TAPER 1 80x50 80x50
SINGLE ORIFICE AIR VALVE WITH BUILT IN ISOLATING VALVE 1 50 50
CHAMBER 1 VC1 VC1
COLLAR 0 R Reducer 80 100
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 0 80 100
ALL FLANGED CONCENTRIC TAPER 1 MM MM
ALL FLANGED GATE VALVE 1 CC CC
FLANGE ADAPTOR 1 CC CC
DOUBLE SPIGOT PIPE WITH PUDDLE 1200mm LONG 1 CC CC
CHAMBER 1 VC1 VC1
COLLAR 2 WM Water Meter 80 100
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 4 80 100
ALL FLANGED GATE VALVE 1 80 100
FLANGE ADAPTOR 2 80 100
FLANGED STRAINER FOR WM 1 80 100
ALL FLANGED FERROUS PIPE DN X 10 mm LONG 1 0.8m 1m
FLANGED WATER METER 1 80 100
CHAMBER 2 VC1 VC1
DOUBLE SOCKET BEND 1 B Bend 80 100
MARKER PL 1 PL PL
FLANGED SOCKET 1 FH Fire Hydrant 80 100
FLANGE ADAPTOR 1 80 100
COLLAR 1 80 100
ALL FLANGED TEE 1 80x80 100x80
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED FERROUS PIPE 1200mm LONG 1 80 80
FLANGED FIRE HYDRANT DN 80 1 80 80
CHAMBER 1 VB2 VB2
FLANGED SOCKET 1 X Cross 80 100
BLANK FLANGE 2 80 100
ALL FLANGED CROSS 1 80x80 100x100
ALL FLANGED CONCENTRIC TAPER 0 MM MM
ALL FLANGED CONCENTRIC TAPER 0 MM MM
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 CC CC
ALL FLANGED GATE VALVE 1 CC CC
FLANGE ADAPTOR 1 CC CC
COLLAR 1 CC CC
CHAMBER 1 VC1 VC1
FLANGE ADAPTOR 1 X1 Crossing maj 80 100
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 80 100
ALL FLANGED GATE VALVE 1 80 100
COLLAR 1 80 100
ALL FLANGED CONCENTRIC TAPER 1 CR CR
ALL FLANGED CONCENTRIC TAPER 1 CR CR
ALL FLANGED CONCENTRIC TAPER 1 CM CM
ALL FLANGED CONCENTRIC TAPER 1 CM CM
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 CC CC
COLLAR 1 CC CC
ALL FLANGED GATE VALVE 1 CC CC
FLANGE ADAPTOR 1 CC CC
CHAMBER 2 VC1 VC1
FLANGE ADAPTOR 1 X2 Crossing Exis 80 100
ALL FLANGED GATE VALVE 1 80 100
FLANGED SPIGOT FERROUS PIPE 1000mm LONG 2 80 100
COLLAR 1 80 100
ALL FLANGED CONCENTRIC TAPER 1 CR CR
ALL FLANGED CONCENTRIC TAPER 1 CR CR
ALL FLANGED CONCENTRIC TAPER 1 CM CM
ALL FLANGED CONCENTRIC TAPER 1 CM CM
ALL FLANGED GATE VALVE 1 CC CC
FLANGE ADAPTOR 1 CC CC
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 CC CC
COLLAR 1 CC CC
ALL FLANGED CROSS 1 CZ CZ
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2 CC CC
ALL FLANGED GATE VALVE 1 CC CC
FLANGE ADAPTOR 1 CC CC
FLANGED SOCKET 1 CC CC
COLLAR 1 CC CC
CHAMBER 3 VC1 VC1
FLANGED SOCKET 1 BKFG BLANK FLA 80 100
BLANK FLANGE 1 80 100
 CO

Dia Dia Dia Dia Dia Dia Dia Dia Dia Mat item Code
150 200 250 300 350 400 450 500 600 Fe 1 FVJA
150x80 200x80 250x80 300x80 350x150 400x200 450x200 500x200 600x200 Fe 2 FFIT
80 80 80 80 150 200 200 200 200 Fe 3 FFS3
80 80 80 80 150 200 200 200 200 Fe 4 PPE1
80 80 80 80 150 200 200 200 200 Fe 5 FVJA
80 80 80 80 150 200 200 200 200 Fe 6 FFP1
80 80 80 80 150 200 200 200 200 Fe 7 FFGV
VB1 VB1 VB1 VB1 VB1 VB1 VB1 VB1 VB1 Fe 8 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 FVJA
150 200 250 300 350 400 450 500 600 Fe 2 FFP1
150 200 250 300 350 400 450 500 600 Fe 3 FPE2
150 200 250 300 350 400 450 500 600 Fe 4 FFAD
80 80 80 80 150 200 200 200 200 Fe 5 FFGV
VC1 VC1 VC2 VC2 VC2 VC2 VC3 VC3 VC3 Fe 6 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 FVJA
150 200 250 300 350 400 450 500 600 Fe 2 FFS1
150 200 250 300 350 400 450 500 600 Fe 3 FPE1
150 200 250 300 350 400 450 500 600 Fe 4 FFAD
150x100 200x100 250x200 300x200 350x200 400x200 450x200 500x200 600x200 Fe 5 FFAT
100x50 100x50 200x50 200x50 200x50 200x80 200x80 200x80 200x80 Fe 6 FFCT
50 50 50 50 50 80 80 80 80 Fe 7 DOAV
VC1 VC1 VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 8 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 PFCA
150 200 250 300 350 400 450 500 600 Fe 2 FFP1
150 200 250 300 350 400 450 500 600 Fe 3 FFAD
150 200 250 300 350 400 450 500 600 Fe 4 FFGV
150 200 250 300 350 400 450 500 600 Fe 5 FVJA
MM MM MM MM MM MM MM MM MM Fe 6 FFAT
CC CC CC CC CC CC CC CC CC Fe 7 BKFG
VC1 VC1 VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 8 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 FFAD
150 200 250 300 350 400 450 500 600 Fe 2 FFGV
150 200 250 300 350 400 450 500 600 Fe 3 BKFG
150 200 250 300 350 400 450 500 600 Fe 4 FVJA
150 200 250 300 350 400 450 500 600 Fe 5 FFP1
MM MM MM MM MM MM MM MM MM Fe 6 FFAT
MM MM MM MM MM MM MM MM MM Fe 7 FFCT
CC CC CC CC CC CC CC CC CC Fe 8 FFGV
CC CC CC CC CC CC CC CC CC Fe 9 FFP1
CC CC CC CC CC CC CC CC CC Fe 10 FFAD
CC CC CC CC CC CC CC CC CC Fe 11 FVJA
VC1 VC1 VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 12 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 FFAD
150 200 250 300 350 400 450 500 600 Fe 2 FFGV
150 200 250 300 350 400 450 500 600 Fe 3 FVJA
150 200 250 300 350 400 450 500 600 Fe 4 FFP1
MR MR MR MR MR MR MR MR MR Fe 5 FFAT
MR MR MR MR MR MR MR MR MR Fe 6 FFCT
 CC CC CC CC CC CC CC CC CC Fe 7 FFGV
CC CC CC CC CC CC CC CC CC Fe 8 FFP1
CC CC CC CC CC CC CC CC CC Fe 9 FFAD
CC CC CC CC CC CC CC CC CC Fe 10 FVJA
CC CC CC CC CC CC CC CC CC Fe 11 PFCA
VC1 VC1 VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 12 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 PFCA
150 200 250 300 350 400 450 500 600 Fe 2 BKFG
150x150 200x200 250x250 300x300 350x350 400x400 450x450 500x500 600x600 Fe 3 FFAT
MM MM MM MM MM MM MM MM MM Fe 4 FFCT
CC CC CC CC CC CC CC CC CC Fe 5 FFGV
CC CC CC CC CC CC CC CC CC Fe 6 FFP1
CC CC CC CC CC CC CC CC CC Fe 7 FFAD
CC CC CC CC CC CC CC CC CC Fe 8 FVJA
VC1 VC1 VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 9 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 FVJA
150 200 250 300 350 400 450 500 600 Fe 2 FFP1
150 200 250 300 350 400 450 500 600 Fe 3 FFGV
150 200 250 300 350 400 450 500 600 Fe 4 FFAD
150 200 250 300 350 400 450 500 600 Fe 5 PFCA
150x150 200x200 250x250 300x300 350x350 400x400 450x450 500x500 600x600 Fe 6 FFAT
MM MM MM MM MM MM MM MM MM Fe 7 FFCT
CC CC CC CC CC CC CC CC CC Fe 8 FFGV
CC CC CC CC CC CC CC CC CC Fe 9 FFAD
CC CC CC CC CC CC CC CC CC Fe 10 FFP1
CC CC CC CC CC CC CC CC CC Fe 11 PFCA
CC CC CC CC CC CC CC CC CC Fe 12 FVJA
VC1 VC1 VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 13 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 FVJA
150 200 250 300 350 400 450 500 600 Fe 2 FFS1
150 200 250 300 350 400 450 500 600 Fe 3 FPE1
150 200 250 300 350 400 450 500 600 Fe 4 FFAD
150x100 200x100 250x200 300x200 350x200 400x200 450x200 500x200 600x200 Fe 5 FFAT
100x50 100x50 200x50 200x50 200x50 200x80 200x80 200x80 200x80 Fe 6 FFCT
50 50 50 50 50 80 80 80 80 Fe 7 SOAV
VC1 VC1 VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 8 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 FVJA
150 200 250 300 350 400 450 500 600 Fe 2 FFP1
MM MM MM MM MM MM MM MM MM Fe 3 FFCT
CC CC CC CC CC CC CC CC CC Fe 4 FFGV
CC CC CC CC CC CC CC CC CC Fe 5 FFAD
CC CC CC CC CC CC CC CC CC Fe 6 FPE2
VC1 VC1 VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 7 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 FVJA
150 200 250 300 350 400 450 500 600 Fe 2 FFP1
150 200 250 300 350 400 450 500 600 Fe 3 FFGV
150 200 250 300 350 400 450 500 600 Fe 4 FFAD
150 200 250 300 350 400 450 500 600 Fe 5 FSWM
1.5m 2m 2.5m 3m 3.5m 4m 4.5m 5m 6m Fe 6 FFP3
150 200 250 300 350 400 450 500 600 Fe 7 FFWM
VC1 VC1 VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 8 CHMB
 150 200 250 300 350 400 450 500 600 Fe 1 FSSB
PL PL PL PL PL PL PL PL PL Fe 2 MAPL
150 200 250 300 350 400 450 500 600 Fe 1 PFCA
150 200 250 300 350 400 450 500 600 Fe 2 FFAD
150 200 250 300 350 400 450 500 600 Fe 3 FVJA
150x80 200x80 250x80 300x80 350x150 400x200 450x200 500x200 600x200 Fe 4 FFAT
150x80 200x80 200x80 200x80 200x80 Fe 5 FFCT
80 80 80 80 80 80 80 80 80 Fe 6 FFP2
80 80 80 80 80 80 80 80 80 Fe 7 FH80
VB2 VB2 VB2 VB2 VB2 VB2 VB2 VB2 VB2 Fe 8 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 PFCA
150 200 250 300 350 400 450 500 600 Fe 2 BKFG
150x150 200x200 250x250 300x300 350x350 400x400 450x450 500x500 600x600 Fe 3 FFCR
MM MM MM MM MM MM MM MM MM Fe 4 FFCT
MM MM MM MM MM MM MM MM MM Fe 5 FFCT
CC CC CC CC CC CC CC CC CC Fe 6 FFP1
CC CC CC CC CC CC CC CC CC Fe 7 FFGV
CC CC CC CC CC CC CC CC CC Fe 8 FFAD
CC CC CC CC CC CC CC CC CC Fe 9 FVJA
VC1 VC1 VC2 VC2 VC2 VC2 VC3 VC3 VC3 Fe 10 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 FFAD
150 200 250 300 350 400 450 500 600 Fe 2 FFP1
150 200 250 300 350 400 450 500 600 Fe 3 FFGV
150 200 250 300 350 400 450 500 600 Fe 4 FVJA
CR CR CR CR CR CR CR CR CR Fe 5 FFCT
CR CR CR CR CR CR CR CR CR Fe 6 FFCT
CM CM CM CM CM CM CM CM CM Fe 7 FFCT
CM CM CM CM CM CM CM CM CM Fe 8 FFCT
CC CC CC CC CC CC CC CC CC Fe 9 FFP1
CC CC CC CC CC CC CC CC CC Fe 10 FVJA
CC CC CC CC CC CC CC CC CC Fe 11 FFGV
CC CC CC CC CC CC CC CC CC Fe 12 FFAD
VC1 VC1 VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 13 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 FFAD
150 200 250 300 350 400 450 500 600 Fe 2 FFGV
150 200 250 300 350 400 450 500 600 Fe 3 FFP1
150 200 250 300 350 400 450 500 600 Fe 4 FVJA
CR CR CR CR CR CR CR CR CR Fe 5 FFCT
CR CR CR CR CR CR CR CR CR Fe 6 FFCT
CM CM CM CM CM CM CM CM CM Fe 7 FFCT
CM CM CM CM CM CM CM CM CM Fe 8 FFCT
CC CC CC CC CC CC CC CC CC Fe 9 FFGV
CC CC CC CC CC CC CC CC CC Fe 10 FFAD
CC CC CC CC CC CC CC CC CC Fe 11 FFP1
CC CC CC CC CC CC CC CC CC Fe 12 FVJA
CZ CZ CZ CZ CZ CZ CZ CZ CZ Fe 13 FFCR
CC CC CC CC CC CC CC CC CC Fe 14 FFP1
CC CC CC CC CC CC CC CC CC Fe 15 FFGV
CC CC CC CC CC CC CC CC CC Fe 16 FFAD
CC CC CC CC CC CC CC CC CC Fe 17 PFCA
CC CC CC CC CC CC CC CC CC Fe 18 FVJA
VC1 VC1 VC2 VC3 VC3 VC3 VC3 VC4 VC4 Fe 19 CHMB
150 200 250 300 350 400 450 500 600 Fe 1 PFCA
150 200 250 300 350 400 450 500 600 Fe 2 BKFG
DE

description Qunt
COLLAR 0
DOUBLE SOCKET LEVEL INVERT TEE WITH FLANGED BRANCH 1
FLANGED SPIGOT 2
uPVC PIPE 1000mm LONG 1
COLLAR 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 1
ALL FLANGED GATE VALVE 1
CHAMBER 1
COLLAR 2
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 1
DOUBLE SPIGOT PIPE WITH PUDDLE 1200mm LONG 1
FLANGE ADAPTOR 1
ALL FLANGED GATE VALVE 1
CHAMBER 1
COLLAR 2
FLANGED SPIGOT FERROUS PIPE 1000mm LONG 1
DOUBLE SPIGOT PIPE 1000mm LONG 1
FLANGE ADAPTOR 1
ALL FLANGED TEE 1
ALL FLANGED CONCENTRIC TAPER 1
DOUBLE ORIFICE AIR VALVE WITH BUILT IN ISOLATING VALVE 1
CHAMBER 1
FLANGED SOCKET 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
FLANGE ADAPTOR 1
ALL FLANGED GATE VALVE 1
COLLAR 2
ALL FLANGED TEE 1
BLANK FLANGE 1
CHAMBER 1
FLANGE ADAPTOR 1
ALL FLANGED GATE VALVE 1
BLANK FLANGE 1
COLLAR 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
ALL FLANGED TEE 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED GATE VALVE 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
FLANGE ADAPTOR 1
COLLAR 1
CHAMBER 2
FLANGE ADAPTOR 1
ALL FLANGED GATE VALVE 1
COLLAR 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
ALL FLANGED TEE 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED GATE VALVE 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
FLANGE ADAPTOR 1
COLLAR 1
FLANGED SOCKET 1
CHAMBER 2
FLANGED SOCKET 1
BLANK FLANGE 1
ALL FLANGED TEE 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED GATE VALVE 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
FLANGE ADAPTOR 1
COLLAR 1
CHAMBER 1
COLLAR 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
ALL FLANGED GATE VALVE 1
FLANGE ADAPTOR 1
FLANGED SOCKET 1
ALL FLANGED TEE 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED GATE VALVE 1
FLANGE ADAPTOR 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
FLANGED SOCKET 1
COLLAR 1
CHAMBER 2
COLLAR 1
FLANGED SPIGOT FERROUS PIPE 1000mm LONG 1
DOUBLE SPIGOT PIPE 1000mm LONG 1
FLANGE ADAPTOR 1
ALL FLANGED TEE 1
ALL FLANGED CONCENTRIC TAPER 1
SINGLE ORIFICE AIR VALVE WITH BUILT IN ISOLATING VALVE 1
CHAMBER 1
COLLAR 0
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 0
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED GATE VALVE 1
FLANGE ADAPTOR 1
DOUBLE SPIGOT PIPE WITH PUDDLE 1200mm LONG 1
CHAMBER 1
COLLAR 2
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 4
ALL FLANGED GATE VALVE 1
FLANGE ADAPTOR 2
FLANGED STRAINER FOR WM 1
ALL FLANGED FERROUS PIPE DN X 10 mm LONG 1
FLANGED WATER METER 1
CHAMBER 2
DOUBLE SOCKET BEND 1
MARKER PL 1
FLANGED SOCKET 1
FLANGE ADAPTOR 1
COLLAR 1
ALL FLANGED TEE 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED FERROUS PIPE 1200mm LONG 1
FLANGED FIRE HYDRANT DN 80 1
CHAMBER 1
FLANGED SOCKET 1
BLANK FLANGE 2
ALL FLANGED CROSS 1
ALL FLANGED CONCENTRIC TAPER 0
ALL FLANGED CONCENTRIC TAPER 0
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
ALL FLANGED GATE VALVE 1
FLANGE ADAPTOR 1
COLLAR 1
CHAMBER 1
FLANGE ADAPTOR 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
ALL FLANGED GATE VALVE 1
COLLAR 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED CONCENTRIC TAPER 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
COLLAR 1
ALL FLANGED GATE VALVE 1
FLANGE ADAPTOR 1
CHAMBER 2
FLANGE ADAPTOR 1
ALL FLANGED GATE VALVE 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
COLLAR 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED CONCENTRIC TAPER 1
ALL FLANGED GATE VALVE 1
FLANGE ADAPTOR 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
COLLAR 1
ALL FLANGED CROSS 1
FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG 2
ALL FLANGED GATE VALVE 1
FLANGE ADAPTOR 1
FLANGED SOCKET 1
COLLAR 1
CHAMBER 3
FLANGED SOCKET 1
BLANK FLANGE 1
 ST MA

Material
ND Material
ST 90 uPVC
110 uPVC
150 Fe
160 uPVC
200 Fe
225 uPVC
250 Fe
280 uPVC
300 Fe
350 Fe
400 Fe
450 Fe
500 Fe
600 Fe

BKFG BLANK FLANGE

CHMB CHAMBER
DOAV DOUBLE ORIFICE AIR VALVE WITH BUILT IN ISOLATING VALVE
FFAD FLANGE ADAPTOR
FFAT ALL FLANGED TEE
FFCR ALL FLANGED CROSS
FFCT ALL FLANGED CONCENTRIC TAPER
FFGV ALL FLANGED GATE VALVE
FFIT DOUBLE SOCKET LEVEL INVERT TEE WITH FLANGED BRANCH
FFP1 FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG
FFP2 ALL FLANGED FERROUS PIPE 1200mm LONG
FFP3 ALL FLANGED FERROUS PIPE DN X 10 mm LONG
PP TD DB AG

Chainage Min.Trench Depth

From Up To DN Material above pipe, cm Depth Band Bends
0+000 0+456 600 120 0.00 1.50 11.25
0+456 0+696 500 1.50 2.00 22.5
0+696 0+977 400 2.00 2.50 30
0+977 1+197 300 2.50 3.00 45
3.00 4.00 90
4.00 5.00 11.5+45
5.00 6.00 22.5+45
6.00 7.00

IF(AND($BD11>BH$8,$BE11<BH$9,$BF11=0),$B
else IF($BD11>BH$8,
IF($BE11<=BH$9,$BF11,
else IF($BD11>BH$9,0,BH$9-$BD11)),
else IF($BE11<BH$8,0,
else IF($BE11<=BH$9,$BE11-BH$8,0.5))))

IF(AND($BD11>BH$8,$BE11<BH$9,$BF11=0),$BD11,IF($B

IF(AND($BD11>BH$8,$BE11<BH$9,$BF11=0),
$BD11,
else
IF($BD11>BH$8,
IF($BE11<=BH$9,
$BF11,
else
IF($BD11>BH$9,
0,
else
BH$9-$BD11)),
endif
endif
else
IF($BE11<BH$8,
0,
else
IF($BE11<=BH$9,
$BE11-BH$8,
else
0.5))))
endif
endif
endif
endif
11<BH$9,$BF11=0),$B bd11 x bd11
x y z
y bf11 z1 bf11
z1 0 bh9-bd11 0 bh9-bd11
z 0 z2 0
z2 be11-bh8 0.5 be11-bh8 0.5

11<BH$9,$BF11=0),$BD11,IF($BD11>BH$8,IF($BE11<=BH$9,$BF11,IF($BD11>BH$9,0,BH$9-$BD11)),IF($BE11<BH$8,0,IF($BE11<=BH$9,$BE

11<BH$9,$BF11=0),

E11<=BH$9,
H$8,0,IF($BE11<=BH$9,$BE11-BH$8,0.5))))
Material ND Length Pipe length (m) / Depth band (m)
+1 or 5% 0.00 1.50 2.00 2.50 3.00
m % 1.50 2.00 2.50 3.00 3.50
Fe 150 5 - - - - - -
Fe 200 5 - - - - - -
Fe 250 5 - - - - - -
Fe 300 5 - - - - - -
Fe 350 5 - - - - - -
Fe 400 5 - - - - - -
Fe 450 913 5 959 959 - - - -
Fe 500 5 - - - - - -
Fe 600 5 - - - - - -
uPVC 80 5 - - - - - -
uPVC 100 5 - - - - - -
uPVC 150 5 - - - - - -
uPVC 200 5 - - - - - -
uPVC 250 - 5 - - - - - -
uPVC 300 - 5 - - - - -
uPVC 350 - 5 - - - - -
uPVC 400 - 5 - - - - -
913 959 959 - - - -
959
Excavation
Rock 10% Chambers 17.28

Common Excavation 906 16

Rock Excavation 91 2
Rock Class "A" 27 1
Rock Class "B" 27 1
Rock Class "C" 36 1

River Crossings
River Width
Material FE <= 3.0 m 3.0 -
DN <=300 350 400 450 500 600 <=300 350 400
No
Width, m

Material uPVC <= 3.0 m 3.0 -

DN <=300 350 400 450 500 600 <=300 350 400
No
Width

Road Crossings

Material FE Asphalt non-asphalt

DN <=300 >300 <=300 >300
No 0 0 0 0
Width, m 0 0 0 0
Road width 30 10 8 8
Material uPVC Asphalt non-asphalt
DN <=300 >300 <=300 >300
No 0 0 0 0
Width 0 0 0 0
d (m) Total Trench Total From
3.50 4.00 4.50 Length Width Volume
4.00 4.50 5.00 m m m3
- - -
- - -
- - -
- - -
- - -
- - - 1,056
- - - 959 0.70 1,007
- - -
- - - -
- - -
- - -
- - -
- - - - 0.70 -
- - - - 0.70 -
- - -
- - -
- - -
- - - 959 1007 997

Railway Crossings River Crossing

10.0 m
450 500 600

#REF!

10.0 m
Up To Mean depth
m

1,354 1.44

1,056 1.66
 ST FFWM FFWM FFWM FFWM FFWM FFWM FFWMFFWMFFWM FFWM FFWM FSWMFSWMFSWMFSWMFSWMFSWMFSWMFSWM FSWM FSWMFSWMDOAV
DOAV
SOAV
SOAVFFGVFFGVFFGVFFGVFFGV FFGV FFGV FFGVFFGVFFGVFFGV FH80 FSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSB
Return
Return to
to Main
Main Collect
CollectFittings
Fittings

LINE NO. Gravity Raw Water Main

LINE NO. G Device Flanged Water Meter Flanged Strainer for WM Air Valve Flanged Gate Valve FH DOUBLE SOCKE

90 90 90 90 90 90 90 90 90
Detail at Con
Chainage H-Bend V-bends DAV WO WM T R FH GV su to EX 600 500 450 400 350 300 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80 80 50 80 50 600 500 450 400 350 300 250 200 150 100 80 80 600 500 450 400 350 300 250 200 150
ST 0+0 - T - - GV 2
0+13 30 WO - - - - -
0+30 - - - - -
0+51 - - - - -
0+81 - - - - -
0+109 11.25 - - - - -
0+157 22.5 WO - - - - -
0+845 - - - - - 1
0+913 - - - - -
EN 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
0 2 0 0 0 0 1 WM FS Flanged Gate Valve FH 90
80 0 80 0 SAV 50 0 80 0 80 0 80 0
100 0 100 0 80 0 100 0 100 0
150 0 150 0 DAV 50 0 150 0 150 0
200 0 200 0 80 0 200 0 200 0
250 0 250 0 250 0 250 0
300 0 300 0 300 0 300 0
350 0 350 0 350 0 350 0
400 0 400 0 400 0 400 0
450 0 450 0 450 2 450 1
500 0 500 0 500 0 500 0
600 0 600 0 600 0 600 0
2
Bends Summary
80 100 150 200 250 300 350 400 450 500 600 Sum
11.25 0 0 0 0 0 0 0 0 2 0 0 2
22.5 0 0 0 0 0 0 0 0 1 0 0 1
30 0 0 0 0 0 0 0 0 1 0 0 1
45 0 0 0 0 0 0 0 0 0 0 0 0
90 0 0 0 0 0 0 0 0 1 0 0 1
0 0 0 0 0 0 0 0 5 0 0 5

Fitting - Take off 1 of 2 44 of 134

ST FSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSBFSSB FSSB FSSB FSSBFSSBFSSBFSSB FSSB FSSBFSSB FSSB FSSB FSSB FSSB FSSBFSSBFSSBFSSB FSSB FSSBFSSBFSSBFSSBAFPP AFPP AFPPAFPPAFPP
Return
Return to
to Main
Main Collect
CollectFittings
Fittings

LINE NO. Gravity Raw Water Main

LINE NO. G Device DOUBLE SOCKET BEND DOUBLE SOCKET BEND ALL FLANGED FERROUS PIPE WITH PU

90 90 45 45 45 45 45 45 45 45 45 45 45 30 30 30 30 30 30 30 30 30 30 30 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 ### 11.25 ### ### ### ### 11.25 ### ### ### ###
Detail at Con
Chainage H-Bend V-bends DAV WO WM T R FH GV su to EX 100 80 600 500 450 400 350 300 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80 600 500 450 400 350
0+0 - T - - GV
0+13 30 WO - - - - -
0+30 - - - - - 1
0+51 - - - - - 1
0+81 - - - - - 1
0+109 11.25 - - - - -
0+157 22.5 WO - - - - - 1
0+845 - - - - -
0+913 - - - - -
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0
0 2 0 0 0 0 1 45 30 22.5 11.25 AFPP
80 0 80 0 80 0 80 0 80 0
100 0 100 0 100 0 100 0 100 0
150 0 150 0 150 0 150 0 150 0
200 0 200 0 200 0 200 0 200 0
250 0 250 0 250 0 250 0 250 0
300 0 300 0 300 0 300 0 300 0
350 0 350 0 350 0 350 0 350 0
400 0 400 0 400 0 400 0 400 0
450 0 450 1 450 1 450 2 450 0
500 0 500 0 500 0 500 0 500 0
600 0 600 0 600 0 600 0 600 0
0

Fitting - Take off 1 of 2 45 of 134

ST AFPPAFPPAFPPAFPPAFPPAFPP PFC PFC PFC PFC PFC PFC PFC PFC PFC PFC PFC FVJS FVJS FVJS FVJSFVJSFVJ FVJ FVJ FVJ FVJ FVJ FVJ FVJ FVJ FVJ FVJ FFADFFADFFADFFADFFADFFADFFADFFADFFADFFADFFAD PFC PFC PFC PFCAPFC FFP1FFP1FFP1FFP1
Return
Return to
to Main
Main Collect
Collect Fittings
Fittings

600 500 450 400

LINE NO. Gravity Raw Water Main

LINE NO. G Device ALL FLANGED FERROUS PIPE WITH PUDLE 1200mm LONG FLANGED SOCKET STEPED COUPLLING COLLAR Flange Adaptor Flanged Socket FLANGED SPIGOT PIPE WITH PUD

Detail at Con
Chainage H-Bend V-bends DAV WO WM T R FH GV su to EX 300 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80 250 200 150 100 80 600 500 450 400
0+0 - T - - GV 2
0+13 30 WO - - - - -
0+30 - - - - -
0+51 - - - - -
0+81 - - - - -
0+109 11.25 - - - - -
0+157 22.5 WO - - - - -
0+845 - - - - -
0+913 - - - - -
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0
0 2 0 0 0 0 1 PFC VJSC VJFA FSA FA FSA FSP L=1.2m
80 0 80 0 80 0 80 0 80 0 80 0 80 0
100 0 100 0 100 0 100 0 100 0 100 0 100 0
150 0 150 0 150 0 150 0 150 0 150 0 150 0
200 0 200 0 200 0 200 0 200 0 200 0 200 0
250 0 250 0 250 0 250 0 250 0 250 0 250 0
300 0 0 300 0 300 0 300 0
350 0 350 0 350 0 350 0
400 0 400 0 400 0 400 0
450 0 450 0 450 0 450 2
500 0 500 0 500 0 500 0
600 0 600 0 600 0 600 0
0 0 0 2

Fitting - Take off 1 of 2 46 of 134

ST FFP1FFP1FFP1FFP1FFP1FFP1FFP1FFP2FFP2FFP2FFP2 FFP2FFP2FFP2FFP2FFP2FFP2FFP2FFP3FFP3FFP3FFP3FFP3FFP3FFP3FFP3FFP3FFP3FFP3 FFS3FFS3FFS3 FFS3FFS3FFS3FFS3 FFS3FFS3FFS3FFS3FFS1 FFS1 FFS1 FFS1 FFS1 FFS1 FFS1 FFS1 FFS1 FFS1 FFS1
Return
Return to
to Main
Main Collect
CollectFittings
Fittings

350 300 250 200 150 100 80

LINE NO. Gravity Raw Water Main

LINE NO. G Device FLANGED SPIGOT PIPE WITH PUDDLE 1200mm LONG All Flanged PipeL=1.20 m All Flanged Pipe before WM FLANGED SPIGOT Flanged Spigot PipeL=1.20 m

6m 5m 4.5m 4m 3.5m 3m 2.5m 2m 1.5m 1m 0.8m

Detail at Con
Chainage H-Bend V-bends DAV WO WM T R FH GV su to EX 350 300 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80
0+0 - T - - GV
0+13 30 WO - - - - -
0+30 - - - - -
0+51 - - - - -
0+81 - - - - -
0+109 11.25 - - - - -
0+157 22.5 WO - - - - -
0+845 - - - - -
0+913 - - - - -
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 2 0 0 0 0 1 AFP L=1.2m AFP WM FSP FSP L=1.2m
80 0 80 0.8 0 80 0.8 0 80 0
100 0 100 1.0 0 100 1.0 0 100 0
150 0 150 1.5 0 150 1.5 0 150 0
200 0 200 2.0 0 200 2.0 0 200 0
250 0 250 2.5 0 250 2.5 0 250 0
300 0 300 3.0 0 300 3.0 0 300 0
350 0 350 3.5 0 350 3.5 0 350 0
400 0 400 4.0 0 400 4.0 0 400 0
450 0 450 4.5 0 450 4.5 0 450 0
500 0 500 5.0 0 500 5.0 0 500 0
600 0 600 6.0 0 600 6.0 0 600 0
0 0 0

Fitting - Take off 1 of 2 47 of 134

 T
ST FPE1 FPE1FPE1FPE1FPE1FPE1FPE1FPE1FPE1FPE1FPE1FPE2FPE2 FPE2FPE2FPE2FPE2FPE2FPE2FPE2FPE2FPE2PPE1PPE1 PPE1 PPE1PPE1 MAWM s
MAGV MAPRMAAMAWMAF MAPL SE
Return
Return to
to Main
Main Collect
CollectFittings
Fittings e
g
a
y
e
LINE NO. Gravity Raw Water Main
G
LINE NO. G Device DOUBLE SPIGOT PIPE L=1.2 m DOUBLE SPIGOT PIPE WITH PUDDLE L=1.2 m uPVC Short PipeLength (m) e
Marker post
b
r
e
Detail at Con s
Chainage H-Bend V-bends DAV WO WM T R FH GV su to EX 600 500 450 400 350 300 250 200 150 100 80 600 500 450 400 350 300 250 200 150 100 80 250 200 150 100 80 WM GV PRV AV WO FH
e PL
0+0 - T - - GV l
a
0+13 30 WO - - - - -
s
0+30 - - - - - s
0+51 - - - - - i
0+81 - - - - - e
:
0+109 11.25 - - - - - G
0+157 22.5 WO - - - - - a
0+845 - - - - - t
e
0+913 - - - - -
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 o0 0 9
0 2 0 0 0 0 1 FSP L=2.0m PEP L=1.2m UPVC SP MP r

80 0 80 0 80 0 PL 0 S
100 0 100 0 100 0 FH 0 l
150 0 150 0 150 0 WO 0 u
i
200 0 200 0 200 0 AV 0 c
250 0 250 0 250 0 PRV 0 e
300 0 300 0 GV 0
V
350 0 350 0 WM 0 a
400 0 400 0 0 l
450 0 450 0 v
e
500 0 500 0 10
600 0 600 0
0 0

Fitting - Take off 1 of 2 48 of 134

 ST FFCT FFCT FFCT FFCT FFCT FFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCTFFCT

Return
Return to
to Main
Main
LINE NO. Gravity Raw Water Main

Device Flanged Reducer

600 600 600 600 600 500 500 500 500 500 500 500 450 450 450 450 450 450 400 400 400 400 400 400 400 350 350 350 350 350 350 300 300 300 300 300 250 250 250 250 200 200 200 150 150 100 100

Detail at V- Con to
Chainage H-Bend bends DAV WO WM T R FH GV su EX 500 450 400 350 300 450 400 350 300 250 200 150 400 350 300 250 200 150 350 300 250 200 150 100 80 300 250 200 150 100 80 250 200 150 100 80 200 150 100 80 150 100 80 100 80 80 50
ST 0+0 - T - - GV
0+13 30 WO - - - - -
0+30 - - - - -
0+51 - - - - -
0+81 - - - - -
0+109 11.25 - - - - -
0+157 22.5 WO - - - - -
0+845 - - - - -
0+913 - - - - -
EN Sum - - - - - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 2 0 1 0 0 1 4
FR FR FR FR - FR FR FR FR FR
600 500 450 400 350 300 250 200 150 100
300 0 150 0 150 0 80 0 80 0 80 0 80 0 80 0 80 0 50 0
350 0 200 0 200 0 100 0 100 0 100 0 100 0 100 0 100 0 80 0
400 0 250 0 250 0 150 0 150 0 150 0 150 0 150 0
450 0 300 0 300 0 200 0 200 0 200 0 200 0
500 0 350 0 350 0 250 0 250 0 250 0
400 0 400 0 300 0 300 0
450 0 350 0
0 0 0 0 0 0 0 0 0 0

Fitting - Take off 2 of 2 49 of 134

 ST FFCT FFIT FFIT FFIT FFIT FFIT FFIT FFIT FFIT FFIT FFIT FFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFAT

Return
Return to
to Main
Main
LINE NO. Gravity Raw Water Main

educer Device Double Socket Level Invert Tee With Flanged Branch Flanged Tee

80 600 500 450 400 350 300 250 200 150 100 600 600 600 600 600 600 600 600 500 500 500 500 500 500 500 500 500 450 450 450 450 450 450 450 450 400 400 400 400 400 400 400 350 350 350 350 350 350 350

Detail at V- Con to
Chainage H-Bend bends DAV WO WM T R FH GV su EX 50 200 200 200 200 150 80 80 80 80 80 600 500 450 400 350 300 250 200 500 450 400 350 300 250 200 150 100 450 400 350 300 250 200 150 100 400 350 300 250 200 150 100 350 300 250 200 150 100 80
0+0 - T - - GV 1
0+13 30 WO - - - - -
0+30 - - - - -
0+51 - - - - -
0+81 - - - - -
0+109 11.25 - - - - -
0+157 22.5 WO - - - - -
0+845 - - - - -
0+913 - - - - -
Sum 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 2 0 1 0 0 1 4
AFIT FT FT 1 FT FT FT
80 100 80 0 600 500 450 400 350
50 0 150 80 0 100 0 100 0 100 0 80 0
200 80 0 200 0 150 0 150 0 150 0 100 0
250 80 0 250 0 200 0 200 0 200 0 150 0
300 80 0 300 0 250 0 250 0 250 0 200 0
350 150 0 350 0 300 0 300 0 300 0 250 0
400 200 0 400 0 350 0 350 0 350 0 300 0
450 200 0 450 0 400 0 400 0 400 0 350 0
0 500 200 0 500 0 450 0 450 1 0 0
600 200 0 600 0 500 0 1
0 0 0

Fitting - Take off 2 of 2 50 of 134

 ST FFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFATFFAT FFCRFFCRFFCRFFCRFFCRFFCRFFCRFFCRFFCR

Return
Return to
to Main
Main
LINE NO. Gravity Raw Water Main

Device Flanged Tee All Flanged Cross

300 300 300 300 300 300 250 250 250 250 250 200 200 200 200 150 150 150 100 100 80 500 450 400 350 300 250 200 150 100

Detail at V- Con to
Chainage H-Bend bends DAV WO WM T R FH GV su EX 300 250 200 150 100 80 250 200 150 100 80 200 150 100 80 150 100 80 100 80 80 500 450 400 350 300 250 200 150 100
0+0 - T - - GV
0+13 30 WO - - - - -
0+30 - - - - -
0+51 - - - - -
0+81 - - - - -
0+109 11.25 - - - - -
0+157 22.5 WO - - - - -
0+845 - - - - -
0+913 - - - - -
Sum 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 2 0 1 0 0 1 4
FT FT FT FT FT X
300 250 200 150 100 500
80 0 80 0 80 0 80 0 80 0 100 0
100 0 100 0 100 0 100 0 100 0 150 0
150 0 150 0 150 0 150 0 0 200 0
200 0 200 0 200 0 0 250 0
250 0 250 0 0 300 0
300 0 0 350 0
0 400 0
450 0
500 0

Fitting - Take off 2 of 2 51 of 134

ST FPT1FPT1FPT1 FPT1FPT1BKFGBKFGBKFGBKFGBKFGBKFGBKFGBKFGBKFCHMBCHMBCHMBCHMBCHMBCHMBCHMBCHMBCHMB CHMB CHMB CHMB CHMB CHMB CHMB CHMB CHMB CHMB CHMB CHMB CHMB CHMB

Return
Return to
to Main
Main
LINE NO. Gravity Raw Water Main
Plain Ended Tee with Flanged
Device Branch Blank Flange Valve Chambers Valve Box

250 200 150 100 80

Detail at V- Con to
Chainage H-Bend bends DAV WO WM T R FH GV su EX 250 200 150 100 80 450 400 350 300 250 200 150 100 80 VB1 VB2 VC1 VC2 VC5 VC3 VC6 VC4 Depth D range Volume 1.50 2.0 2.5 3.00
0+0 - T - - GV 1
0+13 30 WO - - - - -
0+30 - - - - -
0+51 - - - - -
0+81 - - - - -
0+109 11.25 - - - - -
0+157 22.5 WO - - - - -
0+845 - - - - -
0+913 - - - - -
Sum 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 - - - - 0 0 0 0
0 0 2 0 1 0 0 1 4
Excavation
80 80 0 80 0 0
100 100 0 100 0
150 150 0 150 0 VB1 0 -
200 200 0 200 0 VB2 0 -
250 250 0 250 0 VC1 1 1.2x1.2 2.88
300 0 VC2 0 1.4x1.2 -

V. Chambers
350 0 VC5 0 1.5 x 1.2 -
400 0 VC3 0 1.6x1.2 -
450 0 VC6 0 1.8 x 1.2 -
VC4 0 1.8x1.4 -
1 4

Fitting - Take off 2 of 2 52 of 134

 ST CHMB CHMB ZCNE ZCNE ZCNE ZCNE ZCNE ZCNE ZCNE ZCNE

Return
Return to
to Main
Main
LINE NO. Gravity Raw Water Main

Device connection to Existin

Detail at V- Con to
Chainage H-Bend bends DAV WO WM T R FH GV su EX 3.5 4.00 400 350 300 250 200 150 100 80
0+0 - T - - GV
0+13 30 WO - - - - -
0+30 - - - - -
0+51 - - - - -
0+81 - - - - -
0+109 11.25 - - - - -
0+157 22.5 WO - - - - -
0+845 - - - - -
0+913 - - - - -
Sum 0 0 0 0 0 0 0 0 0 0
0 0 2 0 1 0 0 1 4

Conn to Exit
80 -
100 -
150 0
200 0
250 0
300 0
350 0
400 0
450 0

Fitting - Take off 2 of 2 53 of 134

Concrete (Trust Blocks)
Return
Returnto
to Main
Main
DN
Bends 80 100 150 200 250 300 350 400 450 500 600
11.25 0.01 0.01 0.03 0.05 0.08 0.12 0.18 0.25 0.49 0.59 1.15
22 0.02 0.02 0.06 0.12 0.20 0.28 0.27 0.39 0.89 1.5 2.5
30 0.03 0.04 0.10 0.18 0.28 0.40 0.5 0.75 1.3 2 3.5
45 0.04 0.06 0.12 0.24 0.35 0.58 0.88 1.2 1.8 2.5 4.8
90 0.06 0.19 0.27 0.54 0.99 1.53 1.83 2.1 2.54 3.5 5.0

Tee 0.05 0.07 0.16 0.33 0.55 0.91 1.31 1.87 2.8 3.86 5.1

GV 0.01 0.01 0.02 0.02 0.03 0.03 0.05 0.06 0.07 0.08 0.09

End 0.05 0.07 0.16 0.33 0.55 0.91 1.31 1.87 2.8 3.86 5.1

Red 0.05 0.07 0.16 0.33 0.55 0.91 1.31 1.87 2.8 3.86 5.1
 DN
Bends 80 100 150 200 250 300 350 400 450 500 600
11.25 - - - - - - - - 2 - -
22 - - - - - - - - 1 - -
30 - - - - - - - - 1 - -
45 - - - - - - - - - - -
90 - - - - - - - - 1 - -
Sum - - - - - - - - 5 - - 5
-
DN 80 100 150 200 250 300 350 400 450 500 600
Tee - - - - - - - - 1.0 - - 1
-
GV 0 0 0 0 0 0 0 0 2 0 0 2
-
End - - - - 0 0 0 0 0 -

Red - 0 0 0 0 0 0 0.0

2.0 8.0
 Concret <0.1 0.1-0.5 0.5-1.0 1.0-2.0 2.0-3.0 3.0-4.0 4.0-5.0
<200 - -
200-300 - - - -
300-600 2 2 1 1 2 - -

8
 COLLECTION SHEET

Return
Return to
toMain
Main
SP-01
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

Amount Amount
€ €

Page total, page 1 …………………………..

Page total, page 2 …………………………..
Page total, page 3 …………………………..
Page total, page 4 …………………………..
Page total, page 5 …………………………..
Page total, page 6 …………………………..
Page total, page 7 …………………………..

Bill Total Exclusive of Duties and Taxes, Carried to the Bill

of Quantities Summary 1 (One) (A) ………………………….. 104,365.76

Estimate of Duties Payable (by Category) % …………………………..

…………………………………………………………………… ………… …………………………..

…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..

Sub-Total Duties (B) …………………………..

Total Inclusive Duties (A+B) …………………………..

Estimate of V.A.T. Payable (by Category) %

This should be based on Tax Status on various goods and services provided by
the VAT Department - Inland Revenue Authority

…………………………………………………………………… 15% ………………………….. 15,654.86

…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..

Sub-Total Taxes (C) ………………………….. 15,654.86

Total Inclusive of Duties and Taxes, Carried to the Bill of

Quantities Summary 2 (Two) (A+B+C) ………………………….. 120,020.62

Page 57 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO

CLASS I: PIPE WORK - PIPES

A: SUPPLY

Supply, Transport to Site and Store, including jointing

materials, bolts gaskets, packing, jointing glue etc., as
applicable. Excluding laying and joining. All diameters are
nominal.
I4 Cement Mortar Lined PN 10 Cast Iron Pipes
I410.1 DN 150 m -
I410.2 DN 200 m -
I420.1 DN 250 m -
I420.2 DN 300 m -
I430.1 DN 350 m -
I430.2 DN 400 m -
I430.3 DN 450 m 959.0
I430.4 DN 500 m -
I430.6 DN 600 m -

I5 uPVC PN 10 Socket and Spigot Pipes

I510.1 DN 80 m -
I510.2 DN 100 m -
I510.3 DN 150 m -
I510.4 DN 200 m -
I520.1 DN 250 m -
I520.2 DN 300 m -
I520.3 DN 350 m -
I520.4 DN 400 m -

CLASS J: PIPE WORK - FITTINGS AND VALVES

PN 10
A: SUPPLY
Supply, Transport to Site and Store, including jointing
materials, bolts gaskets, packing, jointing glue etc., as
applicable. Excluding laying and joining. All diameters are
nominal.
J3 Cement Mortar Lined Cast Iron Fittings
J31 Double Socket Bend
J311 Not Exceeding ND 200
J311.1 ND 80
J311.1.1 11.25° No -

Page 58 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J311.1.2 22.5° No -
J311.1.3 30° No -
J311.1.4 45° No -
J311.1.5 90° No -
J311.2 ND 100
J311.2.1 11.25° No -
J311.2.2 22.5° No -
J311.2.3 30° No -
J311.2.4 45° No -
J311.2.5 90° No -
J311.3 ND 150
J311.3.1 11.25° No -
J311.3.2 22.5° No -
J311.3.3 30° No -
J311.3.4 45° No -
J311.4.5 90° No -
J311.4 ND 200
J311.4.1 11.25° No -
J311.4.2 22.5° No -
J311.4.3 30° No -
J311.4.4 45° No -
J311.4.5 90° No -
J312 ND 250 - ND 300
J312.1 ND 250
J312.1.1 11.25° No -
J312.1.2 22.5° No -
J312.1.3 30° No -
J312.1.4 45° No -
J312.1.5 90° No -
J312.2 ND 300
J312.2.1 11.25° No -
J312.2.2 22.5° No -
J312.2.3 30° No -
J312.2.4 45° No -
J312.2.5 90° No -
J313 ND 350 - ND 600
J313.1 ND 350

Page 59 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J313.1.1 11.25° No -
J313.1.2 22.5° No -
J313.1.3 30° No -
J313.1.4 45° No -
J313.1.5 90° No -
J313.2 ND 400
J313.2.1 11.25° No -
J313.2.2 22.5° No -
J313.2.3 30° No -
J313.2.4 45° No -
J313.2.5 90° No -
J313.3 ND 450
J313.3.1 11.25° No 2
J313.3.2 22.5° No 1
J313.3.3 30° No 1
J313.3.4 45° No -
J313.3.5 90° No 1
J313.4 ND 500
J313.4.1 11.25° No -
J313.4.2 22.5° No -
J313.4.3 30° No -
J313.4.4 45° No -
J313.4.5 90° No -
J313.4 ND 600
J313.4.1 11.25° No -
J313.4.2 22.5° No -
J313.4.3 30° No -
J313.4.4 45° No -
J313.4.5 90° No -

J32 Junction and Branches

J321.1 All Flanged Tee (<=ND 200)
J321.1.1 ND 80 x ND 80 No -
J321.1.2 ND 100 x ND 80 No -
J321.1.3 ND 100 x ND 100 No -
J321.1.4 ND 150 x ND 80 No -
J321.1.5 ND 150 x ND 100 No -

Page 60 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J321.1.6 ND 150 x ND 150 No -
J321.1.7 ND 200 x ND 80 No -
J321.1.8 ND 200 x ND 100 No -
J321.1.9 ND 200 x ND 150 No -
J321.1.10 ND 200 x ND 200 No -

Double Socket Level Invert Tee with Flanged Branch

J321.2 (<=ND 200)
J321.2.1 ND 100 x ND 80 No -
J321.2.2 ND 150 x ND 80 No -
J321.2.3 ND 200 x ND 80 No -
J321.3 Plain Ended Tee with Flanged Branch (<=ND 200)
J321.13 ND 80 x ND 80 No -
J321.14 ND 100 x ND 100 No -
J321.15 ND 150 x ND 150 No -
J321.16 ND 200 x ND 200 No -
J322.1 All Flanged Tee (ND 250 - ND 300)
J322.1.1 ND 250 x ND 80 No -
J322.1.2 ND 250 x ND 100 No -
J322.1.3 ND 250 x ND 150 No -
J322.1.4 ND 250 x ND 200 No -
J322.1.5 ND 250 x ND 250 No -
J322.1.6 ND 300 x ND 80 No -
J322.1.7 ND 300 x ND 100 No -
J322.1.8 ND 300 x ND 150 No -
J322.1.9 ND 300 x ND 200 No -
J322.1.10 ND 300 x ND 250 No -
J322.1.11 ND 300 x ND 300 No -
Double Socket Level Invert Tee with Flanged Branch
J322.2 (ND 250 - ND 300)
J322.2.1 ND 250 x ND 80 No -
J322.2.2 ND 300 x ND 80 No -

J322.3 Plain Ended Tee with Flanged Branch (ND 250 - ND 300)
J322.3.1 ND 250 x ND 250 No -
J323.1 All Flanged Tee (ND 350 - ND 600)
J323.1.1 ND 350 x ND 80 No -
J323.1.2 ND 350 x ND 100 No -

Page 61 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J323.1.3 ND 350 x ND 150 No -
J323.1.4 ND 350 x ND 200 No -
J323.1.5 ND 350 x ND 250 No -
J323.1.6 ND 350 x ND 300 No -
J323.1.7 ND 350 x ND 350 No -
J323.1.8 ND 400 x ND 80 No
J323.1.9 ND 400 x ND 100 No -
J323.1.10 ND 400 x ND 150 No -
J323.1.11 ND 400 x ND 200 No -
J323.1.12 ND 400 x ND 250 No -
J323.1.13 ND 400 x ND 300 No -
J323.1.14 ND 400 x ND 350 No -
J323.1.15 ND 400 x ND 400 No -
J323.1.16 ND 450 x ND 100 No -
J323.1.17 ND 450 x ND 150 No -
J323.1.18 ND 450 x ND 200 No -
J323.1.19 ND 450 x ND 250 No -
J323.1.20 ND 450 x ND 300 No -
J323.1.21 ND 450 x ND 350 No -
J323.1.22 ND 450 x ND 400 No -
J323.1.23 ND 450 x ND 450 No 1
J323.1.24 ND 500 x ND 100 No -
J323.1.25 ND 500 x ND 150 No -
J323.1.26 ND 500 x ND 200 No -
J323.1.27 ND 500 x ND 250 No -
J323.1.28 ND 500 x ND 300 No -
J323.1.29 ND 500 x ND 350 No -
J323.1.30 ND 500 x ND 400 No -
J323.1.31 ND 500 x ND 450 No -
J323.1.32 ND 500 x ND 500 No -
J323.1.33 ND 600 x ND 100 No
J323.1.34 ND 600 x ND 150 No
J323.1.35 ND 600 x ND 200 No -
J323.1.36 ND 600 x ND 250 No -
J323.1.37 ND 600 x ND 300 No -
J323.1.38 ND 600 x ND 350 No -
J323.1.39 ND 600 x ND 400 No -

Page 62 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J323.1.40 ND 600 x ND 450 No -
J323.1.41 ND 600 x ND 500 No -
J323.1.42 ND 600 x ND 600 No -

Double Socket Level Invert Tee with Flanged Branch (ND

J323.2 350 - ND 600)
J323.2.1 ND 350 x ND 150 No -
J323.2.2 ND 400 x ND 200 No -
J323.2.3 ND 450 x ND 200 No -
J323.2.4 ND 500 x ND 200 No -
J323.2.5 ND 600 x ND 200 No -

J324 All Flanged Crosses

J324.1 ND 100 x ND 100 No -
J324.2 ND 150 x ND 150 No -
J324.3 ND 200 x ND 200 No -
J324.4 ND 250 x ND 250 No -
J324.5 ND 300 x ND 300 No -
J324.6 ND 350 x ND 350 No -
J324.7 ND 400 x ND 400 No -
J324.8 ND 450 x ND 450 No -
J324.9 ND 500 x ND 500 No -
J324.10 ND 600 x ND 600 No -

J33 Flanged Tapers

J331.1 ND 80 x ND 50 No -
J331.2 ND 100 x ND 50 No -
J331.3 ND 100 x ND 80 No -
J331.4 ND 150 x ND 80 No -
J331.5 ND 150 x ND 100 No -
J331.6 ND 200 x ND 80 No -
J331.7 ND 200 x ND 100 No -
J331.8 ND 200 x ND 150 No -
J332.1 ND 250 x ND 80 No -
J332.2 ND 250 x ND 100 No -
J332.3 ND 250 x ND 150 No -
J332.4 ND 250 x ND 200 No -

Page 63 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J332.5 ND 300 x ND 80 No -
J332.6 ND 300 x ND 100 No -
J332.7 ND 300 x ND 150 No -
J332.8 ND 300 x ND 200 No -
J332.9 ND 300 x ND 250 No -
J333.1 ND 350 x ND 80 No -
J333.2 ND 350 x ND 100 No -
J333.3 ND 350 x ND 150 No -
J333.4 ND 350 x ND 200 No -
J333.5 ND 350 x ND 250 No -
J333.6 ND 350 x ND 300 No -
J333.7 ND 400 x ND 100 No -
J333.8 ND 400 x ND 150 No -
J333.9 ND 400 x ND 200 No -
J333.10 ND 400 x ND 250 No -
J333.11 ND 400 x ND 300 No -
J333.12 ND 400 x ND 350 No -
J333.13 ND 450 x ND 150 No -
J333.14 ND 450 x ND 200 No -
J333.15 ND 450 x ND 250 No -
J333.16 ND 450 x ND 300 No -
J333.17 ND 450 x ND 350 No -
J333.18 ND 450 x ND 400 No -
J333.19 ND 500 x ND 150 No -
J333.20 ND 500 x ND 200 No -
J333.21 ND 500 x ND 250 No -
J333.22 ND 500 x ND 300 No -
J333.23 ND 500 x ND 350 No -
J333.24 ND 500 x ND 400 No -
J333.25 ND 500 x ND 450 No -
J333.26 ND 600 x ND 300 No -
J333.27 ND 600 x ND 350 No -
J333.28 ND 600 x ND 400 No -
J333.29 ND 600 x ND 450 No -
J333.30 ND 600 x ND 500 No -

J34 Collar

Page 64 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J341.1 Cast Iron Collar (<= ND 200)
J341.1.1 ND 80 No -
J341.1.2 ND 100 No -
J341.1.3 ND 150 No -
J341.1.4 ND 200 No -
J341.2 Cast Iron Stepped Coupling (<= ND 200)
J341.2.1 ND 80 No -
J341.2.2 ND 100 No -
J341.2.3 ND 150 No -
J341.2.4 ND 200 No -
J342.1 Cast Iron Collar (ND 250 - ND 300)
J342.1.1 ND 250 No -
J342.1.2 ND 300 No -
J343.1 Cast Iron Stepped Coupling (ND 250 - ND 300)
J343.1.1 ND 250 No -
J343.1 Cast Iron Collar (ND 350 - ND 600)
J343.1.1 ND 350 No -
J343.1.2 ND 400 No -
J343.1.3 ND 450 No -
J343.1.4 ND 500 No -
J343.1.5 ND 600 No -
J35 Cast Iron Flanged Adaptor
J351.1 ND 80 No -
J351.2 ND 100 No -
J351.3 ND 150 No -
J351.4 ND 200 No -
J352.1 ND 250 No -
J352.2 ND 300 No -
J353.1 ND 350 No -
J353.2 ND 400 No -
J353.3 ND 450 No -
J353.4 ND 500 No -
J353.5 ND 600 No -

J38 Straight Specials

J381 Short Pipes, <= ND 200
J381.1 Double Spigot, L=1.2 m
J381.1.1 ND 80 No -

Page 65 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J381.1.2 ND 100 No -
J381.1.3 ND 150 No -
J381.1.4 ND 200 No -
J381.2 All Flanged, L=1.2 m (<= ND 200)
J381.2.1 ND 80 No -
J381.2.2 ND 100 No -
J381.2.3 ND 150 No -
J381.2.4 ND 200 No -
J381.3 All Flanged, L=1.5 m (<= ND 200)
J381.3.1 ND 150 No -
J381.4 Flanged Spigot, L=1.2 m (<= ND 200)
J381.4.1 ND 80 No -
J381.4.2 ND 100 No -
J381.4.3 ND 150 No -
J381.4.4 ND 200 No -

J381.6 Double Spigot Pipe With Puddle 1.2m Long (<=ND 200)
J381.6.1 ND 80 No -
J381.6.2 ND 100 No -
J381.6.3 ND 150 No -
J381.6.4 ND 200 No -

J381.7 Flanged Spigot Pipe With Puddle 1.2m Long (<=ND 200)
J381.7.1 ND 80 No -
J381.7.2 ND 100 No -
J381.7.3 ND 150 No -
J381.7.4 ND 200 No -

J381.8 Double Flanged Pipe With Puddle 1.2m Long (<=ND 200)
J381.8.1 ND 80 No -
J381.8.2 ND 100 No -
J381.8.3 ND 150 No -
J381.8.4 ND 200 No -

J382 Short Pipes, ND 250 - ND 300

J382.1 Double Spigot, L=1.2 m (ND 250 - ND 300)
J382.1.1 ND 250 No -
J382.1.2 ND 300 No -

Page 66 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J382.2 All Flanged, L=1.2 m (ND 250 - ND 300)
J382.2.1 ND 250 No -
J382.2.2 ND 300 No -
J382.3 All Flanged (ND 250 - ND 300)
J382.3.1 ND 250, L=2.5 m No -
J382.3.2 ND 300, L=3.0 m No -
J382.4 Flanged Spigot, L=1.2 m (ND 250 - ND 300)
J382.4.1 ND 250 No -
J382.4.2 ND 300 No -
J382.6 Flanged Spigot, (ND 250 - ND 300)
J382.6.1 ND 250, L=2.5 m No -
J382.6.2 ND 300, L=3.0 m No -
Double Spigot Pipe With Puddle 1.2m Long (ND 250 - ND
J382.7 300)
J382.7.1 ND 250 No -
J382.7.2 ND 300 No -
Flanged Spigot Pipe With Puddle 1.2m Long (ND 250 -
J382.8 ND 300)
J382.8.1 ND 250 No -
J382.8.2 ND 300 No -
Double Flanged Pipe With Puddle 1.2m Long (ND 250 -
J382.9 ND 300)
J382.9.1 ND 250 No -
J382.9.2 ND 300 No -

J383 Short Pipes, ND 350 - ND 600

J383.1 Double Spigot, L=1.2 m (ND 350 - ND 600)
J383.1.1 ND 350 No -
J383.1.2 ND 400 No -
J383.1.3 ND 450 No -
J383.1.4 ND 500 No -
J383.1.5 ND 600 No -
J383.2 All Flanged, L=1.2 m (ND 350 - ND 600)
J383.2.1 ND 350 No -
J383.2.2 ND 400 No -
J383.2.3 ND 450 No -
J383.2.4 ND 500 No -
J383.2.5 ND 600 No -

Page 67 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J383.3 All Flanged (ND 350 - ND 600)
J383.3.1 ND 350, L=3.5 m No -
J383.3.2 ND 400, L=4.0 m No -
J383.3.3 ND 450, L=4.5 m No -
J383.3.4 ND 500, L=5.0 m No -
J383.3.5 ND 600, L=6.0 m No -
J383.6 Flanged Spigot, L=1.2 m (ND 350 - ND 600)
J383.6.1 ND 350 No -
J383.6.2 ND 400 No -
J383.6.3 ND 450 No -
J383.6.4 ND 500 No -
J383.6.5 ND 600 No -
J383.8 Flanged Spigot Pipe (ND 350 - ND 600)
J383.8.1 ND 350, L=3.5 m No -
J383.8.2 ND 400, L=4.0 m No -
J383.8.3 ND 450, L=4.5 m No -
J383.8.4 ND 500, L=5.0 m No -
J383.8.5 ND 600, L=6.0 m No -
Double Spigot Pipe With Puddle 1.2 Long (ND 350 - ND
J383.9 600)
J383.9.1 ND 350 No -
J383.9.2 ND 400 No -
J383.9.3 ND 450 No -
J383.9.4 ND 500 No -
J383.9.5 ND 600 No -
Flanged Spigot Pipe With Puddle 1.2 Long (ND 350 - ND
J383.10 600)
J383.10.1 ND 350 No -
J383.10.2 ND 400 No -
J383.10.3 ND 450 No 2
J383.10.4 ND 500 No -
J383.10.5 ND 600 No -
Double Flanged Pipe With Puddle 1.2 Long (ND 350 - ND
J383.11 600)
J383.11.1 ND 350 No -
J383.11.2 ND 400 No -
J383.11.3 ND 450 No -
J383.11.4 ND 500 No -
J383.11.5 ND 600 No -

Page 68 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO

J451 Flanged Socket

J451.1 ND 80 No -
J451.2 ND 100 No -
J451.3 ND 150 No -
J451.4 ND 200 No -
J451.5 ND 250 No -
J451.6 ND 300 No -
J451.7 ND 350 No -
J451.8 ND 400 No -
J451.9 ND 450 No -
J451.10 ND 500 No -
J451.11 ND 600 No -

J452 Flanged Spigot

J452.1 ND 80 No -
J452.2 ND 100 No -
J452.3 ND 150 No -
J452.4 ND 200 No -
J452.5 ND 250 No -
J452.6 ND 300 No -
J452.7 ND 350 No -
J452.8 ND 400 No -
J452.9 ND 450 No -
J452.10 ND 500 No -
J452.11 ND 600 No -

J8 Valves
J81 Flanged Gate Valve
J811.1 ND 80 No -
J811.2 ND 100 No -
J811.3 ND 150 No -
J811.4 ND 200 No -
J812.1 ND 250 No -
J812.2 ND 300 No -
J813.1 ND 350 No -
J813.2 ND 400 No -
J813.3 ND 450 No 2
J813.4 ND 500 No -
J813.5 ND 600 No -

J83 Non-Return Valve

Page 69 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J831.1 ND 80 No
J831.2 ND 100 No
J831.3 ND 150 No
J831.4 ND 200 No
J832.1 ND 250 No
J832.2 ND 300 No
J833.1 ND 350 No
J833.2 ND 400 No
J833.3 ND 450 No
J833.4 ND 500 No
J833.5 ND 600 No

J86 Air Valve

All air valves have to be equipped with built-in isolating valve

J861.1 Single Orifice Air Valve
J861.1.1 ND 50 No -
J861.1.2 ND 80 No -
J861.2 Double Orifice Air Valve
J861.2.1 ND 50 No -
J861.2.2 ND 80 No -

J87 Pressure Reducing Valve

J871.1 ND 80 No
J871.2 ND 100 No
J871.3 ND 150 No
J871.4 ND 200 No
J872.1 ND 250 No
J872.2 ND 300 No
J873.1 ND 350 No
J873.2 ND 400 No
J873.3 ND 450 No
J873.4 ND 500 No
J873.5 ND 600 No

J88 Blank Flange

J881.1 ND 80 No -
J881.2 ND 100 No -

Page 70 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J881.3 ND 150 No -
J881.4 ND 200 No -
J882.1 ND 250 No -
J882.2 ND 300 No -
J883.1 ND 350 No -
J883.2 ND 400 No -
J883.3 ND 450 No -
J883.4 ND 500 No -
J883.5 ND 600 No -

J91 Flanged Water Meter

J911.1 ND 80 No -
J911.2 ND 100 No -
J911.3 ND 150 No -
J911.4 ND 200 No -
J912.1 ND 250 No -
J912.2 ND 300 No -
J913.1 ND 350 No -
J913.2 ND 400 No -
J913.3 ND 450 No -
J913.4 ND 500 No -
J913.5 ND 600 No -

J92 Strainer
J921.1 ND 80 No -
J921.2 ND 100 No -
J921.3 ND 150 No -
J921.4 ND 200 No -
J922.1 ND 250 No -
J922.2 ND 300 No -
J923.1 ND 350 No -
J923.2 ND 400 No -
J923.3 ND 450 No -
J923.4 ND 500 No -
J923.5 ND 600 No -

J93 Fire Hydrant

Page 71 of 134
 SUPPLY OF PIPES AND FITTINGES

SP-01 Return
Return to
to Main
Main
GRAVITY RAW WATER MAINHULUKA INTAKERaw Water Header Tank

ITEM DESCRIPTION UNIT QNTY RATE AMOUNT

No. EURO EURO
J931.1 ND 80 No -
PAGE TOTAL CARRIED TO SECTION COLLECTION SHEET

Page 72 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

94.93 91,042.14

Page 73 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

Page 74 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

320.78 641.55
320.78 320.78
320.78 320.78

387.50 387.50

-
-
-

Page 75 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

Page 76 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

796.24 796.24

Page 77 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

Page 78 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

Page 79 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

Page 80 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

Page 81 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

Page 82 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

1,169.49 2,338.98

Page 83 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

4,258.90 8,517.80

Page 84 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

Page 85 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

Page 86 of 134
SUPPLY OF PIPES AND FITTINGES

ESTIMATE
RATE AMOUNT
EURO EURO

104,365.76

Page 87 of 134
 COLLECTION SHEET

Return
Return to
to Main
Main
BILL NO. SP03
DISTRIBUTION MAIN - B01:- From Ginjo Gravity Main @ Jerien Kela (JK) Reservoir To Junction B-105

Amount Amount
ETB ETB

Page total, page 1 …………………………..

Page total, page 2 …………………………..
Page total, page 3 …………………………..
Page total, page 4 …………………………..
Page total, page 5 …………………………..
Page total, page 6 …………………………..
Page total, page 7 …………………………..

Bill Total Exclusive of Duties and Taxes, Carried to the Bill

of Quantities Summary 1 (One) (A) ………………………….. 244,320.20

Estimate of Duties Payable (by Category) % …………………………..

…………………………………………………………………… ………… …………………………..

…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..

Sub-Total Duties (B) …………………………..

Total Inclusive Duties (A+B) ………………………….. 244,320.20

Estimate of V.A.T. Payable (by Category) %

This should be based on Tax Status on various goods and services provided by
the VAT Department - Inland Revenue Authority 36,648.03

…………………………………………………………………… 15% …………………………..

…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..
…………………………………………………………………… ………… …………………………..

Sub-Total Taxes (C) ………………………….. 36,648.03

Total Inclusive of Duties and Taxes, Carried to the Bill of

Quantities Summary 2 (Two) (A+B+C) ………………………….. 280,968.23

Page 88 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB

CLASS A: GENERAL ITEM

A25 Testing of works
A251 Pipeline testing and commissioning for the whole work on this
line, including all necessary equipment, materials and works
necessary for testing, such as thrust and anchor blocks,
transportation and use of water, pipe fittings, disposal of used
water.
m 959
A252 Disinfection of Pipe lines: flushing with clear water, filling
with water containing 0.05 g/l calcium hypochlorite, left for
24 hours. This includes supply of all necessary equipment,
materials, chemicals and water, measurment of residual
chlorine all as secified. m 959
CLASS D: DEMOLITION AND SITE CLEARANCE

D2 Tree Cutting (Provisional)

Cut down trees, grub up roots and cart away to tips
D21 Girth: 0.5 m - 1.0 m No 2
D22 Girth: 1.0 m - 2.0 m No 1
D23 Girth: exceeding 2.0 m No

Note:- Girth shall be measured 1.0 m above the ground level

CLASS I: PIPE WORK - PIPES

PIPE LAYING

Transport from site store, lay and joint pipes in trench, include
for excavation, preparation of surfaces, disposal of excavated
material, shoring sides of excavation and backfilling.

Note:- Trench width and minimum cover to pipes is as per the

Specification. The cost shall include for strutting, shuttering,
stabilizing the earth faces of trenches and keeping the trenches
free of water by pumping or other means and cost of use of
selected soil from the excavated material for compaction in
bed and surround to backfilling of trenches, etc. all as
specified

I4 Cement Mortar Lined PN 10 Cast Iron Pipes

I412.1 DN 150 in trench, depth not exceeding 1.5 m m -
I412.2 DN 200 in trench, depth not exceeding 1.5 m m -
I422.1 DN 250 in trench, depth not exceeding 1.5 m m -
I422.2 DN 300 in trench, depth not exceeding 1.5 m m -
I432.1 DN 350 in trench, depth not exceeding 1.5 m m -
I432.2 DN 400 in trench, depth not exceeding 1.5 m m -
I432.3 DN 450 in trench, depth not exceeding 1.5 m m 959.0
I432.4 DN 500 in trench, depth not exceeding 1.5 m m -
I432.5 DN 600 in trench, depth not exceeding 1.5 m m -

Page 89 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
I413.1 DN 150 in trench, depth 1.5 m - 2.0 m m -
I413.2 DN 200 in trench, depth 1.5 m - 2.0 m m -
I423.1 DN 250 in trench, depth 1.5 m - 2.0 m m -
I423.2 DN 300 in trench, depth 1.5 m - 2.0 m m -
I433.1 DN 350 in trench, depth 1.5 m - 2.0 m m -
I433.2 DN 400 in trench, depth 1.5 m - 2.0 m m -
I433.3 DN 450 in trench, depth 1.5 m - 2.0 m m -
I433.4 DN 500 in trench, depth 1.5 m - 2.0 m m -
I433.5 DN 600 in trench, depth 1.5 m - 2.0 m m -

I414.1 DN 150 in trench, depth 2.0 m - 2.5 m m -

I414.2 DN 200 in trench, depth 2.0 m - 2.5 m m -
I424.1 DN 250 in trench, depth 2.0 m - 2.5 m m -
I424.2 DN 300 in trench, depth 2.0 m - 2.5 m m -
I434.1 DN 350 in trench, depth 2.0 m - 2.5 m m -
I434.2 DN 400 in trench, depth 2.0 m - 2.5 m m -
I434.3 DN 450 in trench, depth 2.0 m - 2.5 m m -
I434.4 DN 500 in trench, depth 2.0 m - 2.5 m m -
I434.5 DN 600 in trench, depth 2.0 m - 2.5 m m -

I415.1 DN 150 in trench, depth 2.5 m - 3.0 m m -

I415.2 DN 200 in trench, depth 2.5 m - 3.0 m m -
I425.1 DN 250 in trench, depth 2.5 m - 3.0 m m -
I425.2 DN 300 in trench, depth 2.5 m - 3.0 m m -
I435.1 DN 350 in trench, depth 2.5 m - 3.0 m m -
I435.2 DN 400 in trench, depth 2.5 m - 3.0 m m -
I435.3 DN 450 in trench, depth 2.5 m - 3.0 m m -
I435.4 DN 500 in trench, depth 2.5 m - 3.0 m m -
I435.5 DN 600 in trench, depth 2.5 m - 3.0 m m -

I416.1 DN 150 in trench, depth 3.0 m - 3.5 m m -

I416.2 DN 200 in trench, depth 3.0 m - 3.5 m m -
I426.1 DN 250 in trench, depth 3.0 m - 3.5 m m -
I426.2 DN 300 in trench, depth 3.0 m - 3.5 m m -
I436.1 DN 350 in trench, depth 3.0 m - 3.5 m m -
I436.2 DN 400 in trench, depth 3.0 m - 3.5 m m -
I436.3 DN 450 in trench, depth 3.0 m - 3.5 m m -
I436.4 DN 500 in trench, depth 3.0 m - 3.5 m m -
I436.5 DN 600 in trench, depth 3.0 m - 3.5 m m -

Page 90 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB

I417.1 DN 150 in trench, depth 3.5 m - 4.0 m m -

I417.2 DN 200 in trench, depth 3.5 m - 4.0 m m -
I427.1 DN 250 in trench, depth 3.5 m - 4.0 m m -
I427.2 DN 300 in trench, depth 3.5 m - 4.0 m m -
I437.1 DN 350 in trench, depth 3.5 m - 4.0 m m -
I437.2 DN 400 in trench, depth 3.5 m - 4.0 m m -
I437.3 DN 450 in trench, depth 3.5 m - 4.0 m m -
I437.4 DN 500 in trench, depth 3.5 m - 4.0 m m -
I437.5 DN 600 in trench, depth 3.5 m - 4.0 m m -

I418.1 DN 150 in trench, depth 4.0 m - 4.5 m m -

I418.2 DN 200 in trench, depth 4.0 m - 4.5 m m -
I428.1 DN 250 in trench, depth 4.0 m - 4.5 m m -
I428.2 DN 300 in trench, depth 4.0 m - 4.5 m m -
I438.1 DN 350 in trench, depth 4.0 m - 4.5 m m -
I438.2 DN 400 in trench, depth 4.0 m - 4.5 m m -
I438.3 DN 450 in trench, depth 4.0 m - 4.5 m m -
I438.4 DN 500 in trench, depth 4.0 m - 4.5 m m -
I438.5 DN 600 in trench, depth 4.0 m - 4.5 m m -

I419.1 DN 150 in trench, depth 4.5 m - 5.0 m m -

I419.2 DN 200 in trench, depth 4.5 m - 5.0 m m -
I429.1 DN 250 in trench, depth 4.5 m - 5.0 m m -
I429.2 DN 300 in trench, depth 4.5 m - 5.0 m m -
I439.1 DN 350 in trench, depth 4.5 m - 5.0 m m -
I439.2 DN 400 in trench, depth 4.5 m - 5.0 m m -
I439.3 DN 450 in trench, depth 4.5 m - 5.0 m m -
I439.4 DN 500 in trench, depth 4.5 m - 5.0 m m -
I439.5 DN 600 in trench, depth 4.5 m - 5.0 m m -

I5 uPVC PN 10 Socket and Spigot Pipes

I512.1 DN 80 in trench, depth not exceeding 1.5 m m -
I512.2 DN 100 in trench, depth not exceeding 1.5 m m -
I512.3 DN 150 in trench, depth not exceeding 1.5 m m -
I522.4 DN 200 in trench, depth not exceeding 1.5 m m -
I522.5 DN 250 in trench, depth not exceeding 1.5 m m -
I512.4 DN 300 in trench, depth not exceeding 1.5 m m -

Page 91 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
I522.6 DN 350 in trench, depth not exceeding 1.5 m m -
I522.7 DN 400 in trench, depth not exceeding 1.5 m m -

I523.1 DN 80 in trench, depth 1.5 m - 2.0 m m -

I523.2 DN 100 in trench, depth 1.5 m - 2.0 m m -
I523.3 DN 150 in trench, depth 1.5 m - 2.0 m m -
I523.4 DN 200 in trench, depth 1.5 m - 2.0 m m -
I523.5 DN 250 in trench, depth 1.5 m - 2.0 m m -
I523.6 DN 300 in trench, depth 1.5 m - 2.0 m m -
I523.7 DN 350 in trench, depth 1.5 m - 2.0 m m -
I523.8 DN 400 in trench, depth 1.5 m - 2.0 m m -
-
I524.1 DN 80 in trench, depth 2.0 m - 2.5 m m -
I524.2 DN 100 in trench, depth 2.0 m - 2.5 m m -
I524.3 DN 150 in trench, depth 2.0 m - 2.5 m m -
I524.4 DN 200 in trench, depth 2.0 m - 2.5 m m -
I524.5 DN 250 in trench, depth 2.0 m - 2.5 m m -
I524.6 DN 300 in trench, depth 2.0 m - 2.5 m m -
I524.7 DN 350 in trench, depth 2.0 m - 2.5 m m -
I524.8 DN 400 in trench, depth 2.0 m - 2.5 m m -
-
-

CLASS J: PIPE WORK - FITTINGS AND VALVES

PN 10
LAYING AND JOINTING
Transport from site store, lay and joint.
J3 Cement Mortar Lined Ferrous Fittings
J31 Double Socked Bend (For PVC)
J311 Not Exceeding ND 200
J311.1 DN 80
J311.1.1 11.25° No -
J311.1.2 22.5° No -
J311.1.3 30° No -
J311.1.4 45° No -
J311.1.5 90° No -
J311.2 DN 100 -
J311.2.1 11.25° No -
J311.2.2 22.5° No -
J311.2.3 30° No -

Page 92 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J311.2.4 45° No -
J311.2.5 90° No -
J311.3 DN 150 -
J311.3.1 11.25° No -
J311.3.2 22.5° No -
J311.3.3 30° No -
J311.3.4 45° No -
J311.4.5 90° No -
J311.4 DN 200 -
J311.4.1 11.25° No -
J311.4.2 22.5° No -
J311.4.3 30° No -
J311.4.4 45° No -
J311.4.5 90° No -
J312 DN 250 - DN 300 -
J312.1 DN 250 -
J312.1.1 11.25° No -
J312.1.2 22.5° No -
J312.1.3 30° No -
J312.1.4 45° No -
J312.1.5 90° No -
J312.2 DN 300 -
J312.2.1 11.25° No -
J312.2.2 22.5° No -
J312.2.3 30° No -
J312.2.4 45° No -
J312.2.5 90° No -
J313 DN 350 - DN 600 -
J313.1 DN 350 -
J313.1.1 11.25° No -
J313.1.2 22.5° No -
J313.1.3 30° No -
J313.1.4 45° No -
J313.1.5 90° No -
J313.2 DN 400 -
J313.2.1 11.25° No -
J313.2.2 22.5° No -
J313.2.3 30° No -

Page 93 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J313.2.4 45° No -
J313.2.5 90° No -
J313.3 DN 450 -
J313.3.1 11.25° No 2
J313.3.2 22.5° No 1
J313.3.3 30° No 1
J313.3.4 45° No -
J313.3.5 90° No 1
J313.4 DN 500 -
J313.4.1 11.25° No -
J313.4.2 22.5° No -
J313.4.3 30° No -
J313.4.4 45° No -
J313.4.5 90° No -
J313.4 DN 600 -
J313.4.1 11.25° No -
J313.4.2 22.5° No -
J313.4.3 30° No -
J313.4.4 45° No -
J313.4.5 90° No -

J32 Junction and Branches

J321.1 All Flanged Tee (<=DN 200)
J321.1.1 DN 80 x DN 80 No -
J321.1.2 DN 100 x DN 80 No -
J321.1.3 DN 100 x DN 100 No -
J321.1.4 DN 150 x DN 80 No -
J321.1.5 DN 150 x DN 100 No -
J321.1.6 DN 150 x DN 150 No -
J321.1.7 DN 200 x DN 80 No -
J321.1.8 DN 200 x DN 100 No -
J321.1.9 DN 200 x DN 150 No -
J321.1.10 DN 200 x DN 200 No -

Double Socket Level Invert Tee with Flanged Branch

J321.2 (<=ND 200)
J321.2.1 ND 100 x ND 80 No -
J321.2.2 ND 150 x ND 80 No -

Page 94 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J321.2.3 ND 200 x ND 80 No -
J321.3 Plain EDNed Tee with Flanged Branch (<=DN 200)
J321.13 DN 80 x DN 80 No -
J321.14 DN 100 x DN 100 No -
J321.15 DN 150 x DN 150 No -
J321.16 DN 200 x DN 200 No -
J322.1 All Flanged Tee (DN 250 - DN 300) -
J322.1.1 DN 250 x DN 80 No -
J322.1.2 DN 250 x DN 100 No -
J322.1.3 DN 250 x DN 150 No -
J322.1.4 DN 250 x DN 200 No -
J322.1.5 DN 250 x DN 250 No -
J322.1.6 DN 300 x DN 80 No -
J322.1.7 DN 300 x DN 100 No -
J322.1.8 DN 300 x DN 150 No -
J322.1.9 DN 300 x DN 200 No -
J322.1.10 DN 300 x DN 250 No -
J322.1.11 DN 300 x DN 300 No -

Double Socket Level Invert Tee with Flanged Branch (DN

J322.2 250 - DN 300) -
J322.2.1 DN 250 x DN 80 No -
J322.2.2 DN 300 x DN 80 No -

J322.3 Plain Ended Tee with Flanged Branch (DN 250 - DN 300) -
J322.3.1 DN 250 x DN 250 No -
J323.1 All Flanged Tee (DN 350 - DN 600) -
J323.1.1 DN 350 x DN 80 No -
J323.1.2 DN 350 x DN 100 No -
J323.1.3 DN 350 x DN 150 No -
J323.1.4 DN 350 x DN 200 No -
J323.1.5 DN 350 x DN 250 No -
J323.1.6 DN 350 x DN 300 No -
J323.1.7 DN 350 x DN 350 No -
J323.1.8 DN 400 x DN 80 No -
J323.1.9 DN 400 x DN 100 No -
J323.1.10 DN 400 x DN 150 No -
J323.1.11 DN 400 x DN 200 No -
J323.1.12 DN 400 x DN 250 No -
J323.1.13 DN 400 x DN 300 No -

Page 95 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J323.1.14 DN 400 x DN 350 No -
J323.1.15 DN 400 x DN 400 No -
J323.1.16 DN 450 x DN 100 No -
J323.1.17 DN 450 x DN 150 No -
J323.1.18 DN 450 x DN 200 No -
J323.1.19 DN 450 x DN 250 No -
J323.1.20 DN 450 x DN 300 No -
J323.1.21 DN 450 x DN 350 No -
J323.1.22 DN 450 x DN 400 No -
J323.1.23 DN 450 x DN 450 No 1
J323.1.24 DN 500 x DN 100 No -
J323.1.25 DN 500 x DN 150 No -
J323.1.26 DN 500 x DN 200 No -
J323.1.27 DN 500 x DN 250 No -
J323.1.28 DN 500 x DN 300 No -
J323.1.29 DN 500 x DN 350 No -
J323.1.30 DN 500 x DN 400 No -
J323.1.31 DN 500 x DN 450 No -
J323.1.32 DN 500 x DN 500 No -
J323.1.33 DN 600 x DN 100 No -
J323.1.34 DN 600 x DN 150 No -
J323.1.35 DN 600 x DN 200 No -
J323.1.36 DN 600 x DN 250 No -
J323.1.37 DN 600 x DN 300 No -
J323.1.38 DN 600 x DN 350 No -
J323.1.39 DN 600 x DN 400 No -
J323.1.40 DN 600 x DN 450 No -
J323.1.41 DN 600 x DN 500 No -
J323.1.42 DN 600 x DN 600 No -
-
Double Socket Level Invert Tee with Flanged Branch (DN
J323.2 350 - DN 600) -
J323.2.1 DN 350 x DN 150 No -
J323.2.2 DN 400 x DN 200 No -
J323.2.3 DN 450 x DN 200 No -
J323.2.4 DN 500 x DN 200 No -
J323.2.5 DN 600 x DN 200 No -
-
J324 All Flanged Crosses -

Page 96 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J324.1 DN 100 x DN 100 No -
J324.2 DN 150 x DN 150 No -
J324.3 DN 200 x DN 200 No -
J324.4 DN 250 x DN 250 No -
J324.5 DN 300 x DN 300 No -
J324.6 DN 350 x DN 350 No -
J324.7 DN 400 x DN 400 No -
J324.8 DN 450 x DN 450 No -
J324.9 DN 500 x DN 500 No -
J324.10 ND 600 x ND 600 No -

J33 Flanged Tapers -

J331.1 DN 80 x DN 50 No -
J331.2 DN 100 x DN 50 No -
J331.3 DN 100 x DN 80 No -
J331.4 DN 150 x DN 80 No -
J331.5 DN 150 x DN 100 No -
J331.6 DN 200 x DN 80 No -
J331.7 DN 200 x DN 100 No -
J331.8 DN 200 x DN 150 No -
J332.1 DN 250 x DN 80 No -
J332.2 DN 250 x DN 100 No -
J332.3 DN 250 x DN 150 No -
J332.4 DN 250 x DN 200 No -
J332.5 DN 300 x DN 80 No -
J332.6 DN 300 x DN 100 No -
J332.7 DN 300 x DN 150 No -
J332.8 DN 300 x DN 200 No -
J332.9 DN 300 x DN 250 No -
J333.1 DN 350 x DN 80 No -
J333.2 DN 350 x DN 100 No -
J333.3 DN 350 x DN 150 No -
J333.4 DN 350 x DN 200 No -
J333.5 DN 350 x DN 250 No -
J333.6 DN 350 x DN 300 No -
J333.7 DN 400 x DN 100 No -
J333.8 DN 400 x DN 150 No -
J333.9 DN 400 x DN 200 No -

Page 97 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J333.10 DN 400 x DN 250 No -
J333.11 DN 400 x DN 300 No -
J333.12 DN 400 x DN 350 No -
J333.13 DN 450 x DN 150 No -
J333.14 DN 450 x DN 200 No -
J333.15 DN 450 x DN 250 No -
J333.16 DN 450 x DN 300 No -
J333.17 DN 450 x DN 350 No -
J333.18 DN 450 x DN 400 No -
J333.19 DN 500 x DN 150 No -
J333.20 DN 500 x DN 200 No -
J333.21 DN 500 x DN 250 No -
J333.22 DN 500 x DN 300 No -
J333.23 DN 500 x DN 350 No -
J333.24 DN 500 x DN 400 No -
J333.25 DN 500 x DN 450 No -
J333.26 ND 600 x ND 300 No -
J333.27 ND 600 x ND 350 No -
J333.28 ND 600 x ND 400 No -
J333.29 ND 600 x ND 450 No -
J333.30 ND 600 x ND 500 No -

J34 Collar
J341.1 Cast Iron Collar (<= ND 200)
J341.1.1 ND 80 No -
J341.1.2 ND 100 No -
J341.1.3 ND 150 No -
J341.1.4 ND 200 No -
J341.2 Ferrous Stepped Coupling (<= ND 200) -
J341.2.1 ND 80 No -
J341.2.2 ND 100 No -
J341.2.3 ND 150 No -
J341.2.4 ND 200 No -
J342.1 Viking Johnson Coupling (ND 250 - ND 300) -
J342.1.1 ND 250 No -
J342.1.2 ND 300 No -
J343.1 Ferrous Stepped Coupling (ND 250 - ND 300) -
J343.1.1 ND 250 No -

Page 98 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J343.1 Ferrous Coupling (ND 350 - ND 600) -
J343.1.1 ND 350 No -
J343.1.2 ND 400 No -
J343.1.3 ND 450 No -
J343.1.4 ND 500 No -
J343.1.5 ND 600 No -
J35 Ferrous Flanged Adaptor -
J351.1 ND 80 No -
J351.2 ND 100 No -
J351.3 ND 150 No -
J351.4 ND 200 No -
J352.1 ND 250 No -
J352.2 ND 300 No -
J353.1 ND 350 No -
J353.2 ND 400 No -
J353.3 ND 450 No -
J353.4 ND 500 No -
J353.5 ND 600 No -

J38 Straight Specials

J381 Short Pipes, <= ND 200
J381.1 Double Spigot, L=1.2 m
J381.1.1 ND 80 No -
J381.1.2 ND 100 No -
J381.1.3 ND 150 No -
J381.1.4 ND 200 No -
J381.2 All Flanged, L=1.2 m (<= ND 200) -
J381.2.1 ND 80 No -
J381.2.2 ND 100 No -
J381.2.3 ND 150 No -
J381.2.4 ND 200 No -
J381.3 All Flanged, L=1.5 m (<= ND 200) -
J381.3.1 ND 150 No -
J381.4 Flanged Spigot, L=1.2 m (<= ND 200) -
J381.4.1 ND 80 No -
J381.4.2 ND 100 No -
J381.4.3 ND 150 No -
J381.4.4 ND 200 No -

Page 99 of 134
 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J381.5 Flanged Spigot, L=2.0 m (<= ND 200) -
J381.5.1 ND 80 No -
J381.5.2 ND 100 No -
J381.5.3 ND 150 No -
J381.5.4 ND 200 No -
J381.6 Double Spigot Pipe With Puddle 1m Long (<=ND 200) -
J381.6.1 ND 80 No -
J381.6.2 ND 100 No -
J381.6.3 ND 150 No -
J381.6.4 ND 200 No -

J381.7 Flanged Spigot Pipe With Puddle 1.2m Long (<=ND 200)
J381.7.1 ND 80 No -
J381.7.2 ND 100 No -
J381.7.3 ND 150 No -
J381.7.4 ND 200 No -

J381.8 Double Flanged Pipe With Puddle 1.2m Long (<=ND 200)
J381.8.1 ND 80 No -
J381.8.2 ND 100 No -
J381.8.3 ND 150 No -
J381.8.4 ND 200 No -
-
J382 Short Pipes, ND 250 - ND 300 -
J382.1 Double Spigot, L=1.2 m (ND 250 - ND 300) -
J382.1.1 ND 250 No -
J382.1.2 ND 300 No -
J382.2 All Flanged, L=1.2 m (ND 250 - ND 300) -
J382.2.1 ND 250 No -
J382.2.2 ND 300 No -
J382.3 All Flanged (ND 250 - ND 300) -
J382.3.1 ND 250, L=2.5 m No -
J382.3.2 ND 300, L=3.0 m No -
J382.4 Flanged Spigot, L=1.2 m (ND 250 - ND 300) -
J382.4.1 ND 250 No -
J382.4.2 ND 300 No -
J382.5 Flanged Spigot, L=2.0 m (ND 250 - ND 300) -
J382.5.1 ND 250 No -
J382.5.2 ND 300 No -

Page 100 of 134

 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J382.6 Flanged Spigot, (ND 250 - ND 300) -
J382.6.1 ND 250, L=2.5 m No -
J382.6.2 ND 300, L=3.0 m No -
Double Spigot Pipe With Puddle 1m Long (ND 250 - ND
J382.7 300) -
J382.7.1 ND 250 No -
J382.7.2 ND 300 No -
Flanged Spigot Pipe With Puddle 1.2m Long (ND 250 -
J382.8 ND 300)
J382.8.1 ND 250 No -
J382.8.2 ND 300 No -
Double Flanged Pipe With Puddle 1.2m Long (ND 250 -
J382.9 ND 300)
J382.9.1 ND 250 No -
J382.9.2 ND 300 No -
-
J383 Short Pipes, ND 350 - ND 600 -
J383.1 Double Spigot, L=1.2 m (ND 350 - ND 600)
J383.1.1 ND 350 No -
J383.1.2 ND 400 No -
J383.1.3 ND 450 No -
J383.1.4 ND 500 No -
J383.1.5 ND 600 No -
J383.2 All Flanged, L=1.2 m (ND 350 - ND 600) -
J383.2.1 ND 350 No -
J383.2.2 ND 400 No -
J383.2.3 ND 450 No -
J383.2.4 ND 500 No -
J383.2.5 ND 600 No -
J383.3 All Flanged (ND 350 - ND 600) -
J383.3.1 ND 350, L=3.5 m No -
J383.3.2 ND 400, L=4.0 m No -
J383.3.3 ND 450, L=4.5 m No -
J383.3.4 ND 500, L=5.0 m No -
J383.3.5 ND 600, L=6.0 m No -
J383.6 Flanged Spigot, L=1.2 m (ND 350 - ND 600) -
J383.6.1 ND 350 No -
J383.6.2 ND 400 No -
J383.6.3 ND 450 No -
J383.6.4 ND 500 No -

Page 101 of 134

 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J383.6.5 ND 600 No -
J383.7 Flanged Spigot, L=2.0 m (ND 350 - ND 600) -
J383.7.1 ND 350 No -
J383.7.2 ND 400 No -
J383.7.3 ND 450 No -
J383.7.7 ND 500 No -
J383.7.5 ND 600 No -
J383.8 Flanged Spigot (ND 350 - ND 600) -
J383.8.1 ND 350, L=3.5 m No -
J383.8.2 ND 400, L=4.0 m No -
J383.8.3 ND 450, L=4.5 m No -
J383.8.4 ND 500, L=5.0 m No -
J383.8.5 ND 600, L=6.0 m No -
Double Spigot Pipe With Puddle 1m Long (ND 350 - ND
J383.9 600)
J383.9.1 ND 350 No -
J383.9.2 ND 400 No -
J383.9.3 ND 450 No -
J383.9.4 ND 500 No -
J383.9.5 ND 600 No -
Flanged Spigot Pipe With Puddle 1.2 Long (ND 350 - ND
J383.10 600)
J383.10.1 ND 350 No -
J383.10.2 ND 400 No -
J383.10.3 ND 450 No 2
J383.10.4 ND 500 No -
J383.10.5 ND 600 No -
Double Flanged Pipe With Puddle 1.2 Long (ND 350 - ND
J383.11 600)
J383.11.1 ND 350 No -
J383.11.2 ND 400 No -
J383.11.3 ND 450 No -
J383.11.4 ND 500 No -
J383.11.5 ND 600 No -

J451 Flanged Socket -

J451.1 ND 80 No -
J451.2 ND 100 No -
J451.3 ND 150 No -
J451.4 ND 200 No -
J451.5 ND 250 No -

Page 102 of 134

 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J451.6 ND 300 No -
J451.7 ND 350 No -
J451.8 ND 400 No -
J451.9 ND 450 No -
J451.10 ND 500 No -
J451.11 ND 600 No -

J452 Flanged Spigot

J452.1 ND 80 No -
J452.2 ND 100 No -
J452.3 ND 150 No -
J452.4 ND 200 No -
J452.5 ND 250 No -
J452.6 ND 300 No -
J452.7 ND 350 No -
J452.8 ND 400 No -
J452.9 ND 450 No -
J452.10 ND 500 No -
J452.11 ND 600 No -

J8 Valves -
J81 Flanged Gate Valve -
J811.1 ND 80 No -
J811.2 ND 100 No -
J811.3 ND 150 No -
J811.4 ND 200 No -
J812.1 ND 250 No -
J812.2 ND 300 No -
J813.1 ND 350 No -
J813.2 ND 400 No -
J813.3 ND 450 No 2
J813.4 ND 500 No -
J813.5 ND 600 No -
-
J83 Non-Return Valve -
J831.1 ND 80 No -
J831.2 ND 100 No -
J831.3 ND 150 No -
J831.4 ND 200 No -
J832.1 ND 250 No -

Page 103 of 134

 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J832.2 ND 300 No -
J833.1 ND 350 No -
J833.2 ND 400 No -
J833.3 ND 450 No -
J833.4 ND 500 No -
J833.5 ND 600 No -

J86 Air Valve -

All air valves have to be equipped with built-in isolating valve -

J861.1 Single Orifice Air Valve -
J861.1.1 ND 50 No -
J861.1.2 ND 80 No -
J861.2 Double Orifice Air Valve -
J861.2.1 ND 50 No -
J861.2.2 ND 80 No -
-
J87 Pressure Reducing Valve -
J871.1 ND 80 No -
J871.2 ND 100 No -
J871.3 ND 150 No -
J871.4 ND 200 No -
J872.1 ND 250 No -
J872.2 ND 300 No -
J873.1 ND 350 No -
J873.2 ND 400 No -
J873.3 ND 450 No -
J873.4 ND 500 No -
J873.5 ND 600 No -
-
J88 Blank Flange -
J881.1 ND 80 No -
J881.2 ND 100 No -
J881.3 ND 150 No -
J881.4 ND 200 No -
J882.1 ND 250 No -
J882.2 ND 300 No -
J883.1 ND 350 No -
J883.2 ND 400 No -
J883.3 ND 450 No -

Page 104 of 134

 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
J883.4 ND 500 No -
J883.5 ND 600 No -
-
J91 Flanged Water Meter -
J911.1 ND 80 No -
J911.2 ND 100 No -
J911.3 ND 150 No -
J911.4 ND 200 No -
J912.1 ND 250 No -
J912.2 ND 300 No -
J913.1 ND 350 No -
J913.2 ND 400 No -
J913.3 ND 450 No -
J913.4 ND 500 No -
J913.5 ND 600 No -
-
J92 Strainer -
J921.1 ND 80 No -
J921.2 ND 100 No -
J921.3 ND 150 No -
J921.4 ND 200 No -
J922.1 ND 250 No -
J922.2 ND 300 No -
J923.1 ND 350 No -
J923.2 ND 400 No -
J923.3 ND 450 No -
J923.4 ND 500 No -
J923.5 ND 600 No -
-
J93 Fire Hydrant -
J931.1 ND 80 No -

CLASS K: PIPE WORK - CHAMBERS AND

PIPEWORK ANCILLARIES

Chambers, ducts, culverts, crossings, thrust and anchor blocks,

reinstatement and others as listed and specified in drawings.

Page 105 of 134

 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
Note:- Items for work in this class shall include:-
- Excavation, preparation of surfaces, disposal of excavated
material, shoring sides of excavation, backfilling and removal
of redundant services.
- Concrete, reinforcement, formwork, joints and finishes
- Tips for disposal of excavated material or debris to be
identified by the contractor in liaison with the local authority

K23 IN SITU CHAMBERS

K23.1 Provide all materials and construct valve chambers internal
dimensions 1200mm x 1200mm. Include for supply and fixing
of precast concrete cover, as detailed in drawings.
No 1
K23.2 Ditto- but internal dimensions 1400 x 1200 mm. No -
K23.3 Ditto- but internal dimensions 1500 x 1200 mm. No -
K23.4 Ditto- but internal dimensions 1600 x 1200 mm. No -
K23.5 Ditto- but internal dimensions 1800 x 1200 mm. No -
K23.6 Ditto- but internal dimensions 1800 x 1400 mm. No -
K23.7 Provide all materials and construct valve box for washout as
detailed in drawings. No -
K23.8 Provide all materials and construct valve box for fire hydrant
as detailed in drawings. No -

K6 Crossings
Note:- Items for work shall include:-
- Diversion work, excavation for foundation, preparation of
surfaces, disposal of excavated material, upholding sides of
excavation, backfilling and removal of dead services.
- Concrete, reinforcement, formwork, joints and finishes.
- Installation of protective Ferrous pipe of nominal bore = ND
of pipe + 100 mm.

K61 River or stream width: 1-3 m

K611 Pipe bore not exceeding 300 mm No
K612 Pipe bore 300-600 mm
K612.1 ND 350 No
K612.2 ND 400 No
K612.3 ND 450 No
K612.4 ND 500 No
K612.5 ND 600 No
K62 River or stream width: 3-10m
K621 Pipe bore not exceeding 300 mm No -
K622 Pipe bore 300-600 mm
K622.1 ND 350 No -
K622.2 ND 400 No -

Page 106 of 134

 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
K622.3 ND 450 No -
K622.4 ND 500 No -
K622.5 ND 600 No -

K7 Reinstatement
K73.1 Breaking up, temporary and permanent reinstatement of
tarmac roads
K73.1.1 Pipe bore not exceeding 300 mm m -
K73.1.2 Pipe bore 300-600 mm m -
K73.2 Breaking up, temporary and permanent reinstatement of non-
tarmac roads
K73.2.1 Pipe bore not exceeding 300 mm m -
K73.2.2 Pipe bore 300-600 mm m -
K73.3 Breaking up, temporary and permanent reinstatement of
railways
K73.3.1 Pipe bore not exceeding 300 mm m
K73.3.2 Pipe bore 300-600 mm m -

K8 Other Pipework Ancillaries

K82 Supply and fix marker posts for water main route, road
crossings, change of direction, air valves, washouts, fire
hydrants and valve chambers. All in accordance with drawings
and specifications No -
K86 Connection to existing pipes
K861 Pipe Bore: not exceeding 200 mm
K861.1 DN 80 No -
K861.2 DN 100 No -
K861.3 DN 150 No -
K861.4 DN 200 No -
K862 Pipe Bore: 200-600 mm
K862.1 DN 250 No -
K862.2 DN 300 No -
K862.3 DN 350 No -
K862.4 DN 400 No -
K862.5 DN 450 No -
K862.6 DN 500 No -
K862.7 DN 600 No -

CLASS L:
PIPEWORK - SUPPORTS AND PROTECTION,
ANCILLARIES TO LAYING AND EXCAVATION
L1 Extras to excavation and backfilling
L11 In pipe trench

Page 107 of 134

 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
L111.1 Excavation in trench for very hard rock (class "A") m³ 27
L111.2 Excavation in trench for hard rock (class "B") m³ 27
L111.3 Excavation in trench for soft rock (class "C") m³ 36
L12 In chambers
L121.1 Excavation of class "A" rock m³ 1
L121.2 Excavation of class "B" rock m³ 1
L121.3 Excavation of class "C" rock m³ 1
Note:- Blasting is NOT permitted for Item L11 & L12

L5 Imported Selected Fill (Provisional)

Provide, transport to site and place imported selected fill and
L53 compact in bed and surround to pipes as specified.
L531 To pipes nominal bore not exceeding 200 mm m -
L532 To pipes nominal bore: 200 - 300 mm m -
L533 To pipes nominal bore: 300 - 600 mm m 959

L7 Concrete support, thrust blocks and anchor blocks

NOTE:- The work includes fixing of supplied pipes and
fittings
L71 Volume:- not exceeding 0.1 m³
L711 To pipes nominal bore: not exceeding 200 mm No -
L712 To pipes nominal bore: 200 - 300 mm No -
L713 To pipes nominal bore: 300 - 600 mm No 2
L72 Volume:- 0.1 - 0.5 m³
L721 To pipes nominal bore: not exceeding 200 mm No -
L722 To pipes nominal bore: 200 - 300 mm No -
L723 To pipes nominal bore: 300 - 600 mm No 2
L73 Volume:- 0.5 - 1.0 m³
l731 To pipes nominal bore: not exceeding 200 mm No -
l732 To pipes nominal bore: 200 - 300 mm No -
l733 To pipes nominal bore: 300 - 600 mm No 1
L74 Volume:- 1.0 - 2 m³
L741 To pipes nominal bore: not exceeding 200 mm No -
L742 To pipes nominal bore: 200 - 300 mm No -
L743 To pipes nominal bore: 300 - 600 mm No 1
L75 Volume:- 2 - 3 m³
L751 To pipes nominal bore: not exceeding 200 mm No -
L752 To pipes nominal bore: 200 - 300 mm No -
L753 To pipes nominal bore: 300 - 600 mm No 2

Page 108 of 134

 Return
Returnto
to Main
Main
BILL NO - CW22
RAW WATER GRAVITY MAIN - GRWM:- From INTAKE TO RAW WATER HEADER TANK
ITEM DESCRIPTION UNIT QNTY RATE AMOUNT
No. ETB ETB
L76 Volume:- 3.0 - 4.0m³
L761 To pipes nominal bore: not exceeding 200 mm No -
L762 To pipes nominal bore: 200 - 300 mm No -
L763 To pipes nominal bore: 300 - 600 mm No -
L77 Volume:- 4.0 - 5.0 m³
L771 To pipes nominal bore: not exceeding 200 mm No -
L772 To pipes nominal bore: 200 - 300 mm No -
L773 To pipes nominal bore: 300 - 600 mm No -

PAGE TOTAL CARRIED TO SECTION COLLECTION SHEET

Page 109 of 134

RATE AMOUNT
ETB ETB

23.94 22,957.53

25.88 24,818.37

120.00 240.00
360.00 360.00

112.00 107,408.00

Page 110 of 134

RATE AMOUNT
ETB ETB

Page 111 of 134

RATE AMOUNT
ETB ETB

Page 112 of 134

RATE AMOUNT
ETB ETB

Page 113 of 134

RATE AMOUNT
ETB ETB

Page 114 of 134

RATE AMOUNT
ETB ETB

221.34 442.67
221.34 221.34
221.34 221.34

267.38 267.38

Page 115 of 134

RATE AMOUNT
ETB ETB

Page 116 of 134

RATE AMOUNT
ETB ETB

549.41 549.41

Page 117 of 134

RATE AMOUNT
ETB ETB

Page 118 of 134

RATE AMOUNT
ETB ETB

Page 119 of 134

RATE AMOUNT
ETB ETB

Page 120 of 134

RATE AMOUNT
ETB ETB

Page 121 of 134

RATE AMOUNT
ETB ETB

Page 122 of 134

RATE AMOUNT
ETB ETB

806.95 1,613.90

Page 123 of 134

RATE AMOUNT
ETB ETB

2,938.64 5,877.28

Page 124 of 134

RATE AMOUNT
ETB ETB

Page 125 of 134

RATE AMOUNT
ETB ETB

Page 126 of 134

RATE AMOUNT
ETB ETB

2,240.00 2,240.00

Page 127 of 134

RATE AMOUNT
ETB ETB

Page 128 of 134

RATE AMOUNT
ETB ETB
150.00 4,050.00
100.00 2,700.00
70.00 2,520.00

150.00 150.00
100.00 100.00
70.00 70.00

50.00 47,950.00

452.00 904.00

644.00 1,288.00

1,220.00 1,220.00

4,103.00 4,103.00

6,024.00 12,048.00

Page 129 of 134

RATE AMOUNT
ETB ETB

244,320.20

Page 130 of 134

 Label Elevation Zone Type Base Flow (Pattern Demand (Ca
Calculated Pressure (kPa)
J-01 J-01 2,269.94 Zone Demand 0 Fixed 0 2,270.92 9.6
J-02 J-02 2,271.64 Zone Inflow 0 Fixed 0 2,270.81 -8.12
J-03 J-03 2,271.85 Zone Demand 0 Fixed 0 2,270.68 -11.48
J-04 J-04 2,268.56 Zone Demand 0 Fixed 0 2,270.49 18.86
J-05 J-05 2,268.65 Zone Demand 0 Fixed 0 2,270.31 16.2
J-06 J-06 2,267.33 Zone Demand 0 Fixed 0 2,270.00 26.16
J-07 J-07 2,268.32 Zone Demand 0 Fixed 0 2,269.57 12.19
J-08 J-08 2,271.63 Zone Demand 0 Fixed 0 2,269.38 -21.99
J-09 J-09 2,270.71 Zone Demand 0 Fixed 0 2,269.28 -14.04
J-10 J-10 2,271.82 Zone Demand 0 Fixed 0 2,269.03 -27.31
J-11 J-11 2,270.61 Zone Demand 0 Fixed 0 2,268.93 -16.48
J-12 J-12 2,270.48 Zone Demand 0 Fixed 0 2,268.79 -16.54
J-13 J-13 2,270.57 Zone Demand 0 Fixed 0 2,268.53 -19.95
J-14 J-14 2,271.30 Zone Demand 0 Fixed 0 2,268.41 -28.29
J-15 J-15 2,273.81 Zone Inflow 0 Fixed 0 2,268.30 -53.91
J-16 J-16 2,273.77 Zone Demand 0 Fixed 0 2,267.90 -57.44
J-17 J-17 2,271.59 Zone Demand 0 Fixed 0 2,267.47 -40.31
J-18 J-18 2,268.79 Zone Demand 0 Fixed 0 2,267.16 -15.9
J-19 J-19 2,267.91 Zone Inflow 0 Fixed 0 2,266.58 -13.01
J-20 J-20 2,267.50 Zone Inflow 0 Fixed 0 2,266.31 -11.67
J-21 J-21 2,267.90 Zone Demand 0 Fixed 0 2,266.02 -18.41
J-22 J-22 2,267.20 Zone Inflow 0 Fixed 0 2,265.91 -12.62
J-23 J-23 2,267.20 Zone Inflow 0 Fixed 0 2,265.85 -13.23
J-24 J-24 2,266.12 Zone Inflow 0 Fixed 0 2,265.63 -4.76
J-25 J-25 2,264.40 Zone Inflow 0 Fixed 0 2,265.39 9.71
 Label Length (m)Diameter Material Hazen- WilCheck Val From NodeFrom Easting (m
GRWM-1 GRWM-1 12.5 450 Ductile Iro 120 0 R-1 378,676.54
GRWM-2 GRWM-2 17.37 450 Ductile Iro 120 0 J-01 378,670.20
GRWM-3 GRWM-3 21.03 450 Ductile Iro 120 0 J-02 378,669.92
GRWM-4 GRWM-4 29.87 450 Ductile Iro 120 0 J-03 378,667.93
GRWM-5 GRWM-5 28.65 450 Ductile Iro 120 0 J-04 378,663.58
GRWM-6 GRWM-6 47.55 450 Ductile Iro 120 0 J-05 378,663.37
GRWM-7 GRWM-7 68.88 450 Ductile Iro 120 0 J-06 378,672.40
GRWM-8 GRWM-8 28.65 450 Ductile Iro 120 0 J-07 378,662.30
GRWM-9 GRWM-9 17.07 450 Ductile Iro 120 0 J-08 378,650.57
GRWM-10GRWM-10 38.71 450 Ductile Iro 120 0 J-09 378,634.62
GRWM-11GRWM-11 16.15 450 Ductile Iro 120 0 J-10 378,600.62
GRWM-12GRWM-12 21.64 450 Ductile Iro 120 0 J-11 378,590.22
GRWM-13GRWM-13 40.54 450 Ductile Iro 120 0 J-12 378,580.81
GRWM-14GRWM-14 19.2 450 Ductile Iro 120 0 J-13 378,557.22
GRWM-15GRWM-15 17.07 450 Ductile Iro 120 0 J-14 378,544.08
GRWM-16GRWM-16 63.09 450 Ductile Iro 120 0 J-15 378,529.04
GRWM-17GRWM-17 67.67 450 Ductile Iro 120 0 J-16 378,466.12
GRWM-18GRWM-18 48.16 450 Ductile Iro 120 0 J-17 378,399.77
GRWM-19GRWM-19 92.05 450 Ductile Iro 120 0 J-18 378,356.94
GRWM-20GRWM-20 42.98 450 Ductile Iro 120 0 J-19 378,350.13
GRWM-21GRWM-21 45.42 450 Ductile Iro 120 0 J-20 378,314.07
GRWM-22GRWM-22 17.07 450 Ductile Iro 120 0 J-21 378,269.12
GRWM-23GRWM-23 9.75 450 Ductile Iro 120 0 J-22 378,253.28
GRWM-24GRWM-24 33.83 450 Ductile Iro 120 0 J-23 378,246.56
GRWM-25GRWM-25 38.1 450 Ductile Iro 120 0 J-24 378,236.25
GRWM-26GRWM-26 30.18 450 Ductile Iro 120 0 J-25 378,220.99
From Northing From ElevaTo Node To Easting (m) To Northing ( To Elevati Upstream CUpstream SVelocity (
988,497.20 2,271.00 J-01 378,670.20 988,508.04 2,269.94 0 2,271.00 1.68
988,508.04 2,269.94 J-02 378,669.92 988,525.37 2,271.64 9.6 2,270.92 1.68
988,525.37 2,271.64 J-03 378,667.93 988,546.30 2,271.85 -8.12 2,270.81 1.68
988,546.30 2,271.85 J-04 378,663.58 988,575.80 2,268.56 -11.48 2,270.68 1.68
988,575.80 2,268.56 J-05 378,663.37 988,604.35 2,268.65 18.86 2,270.49 1.68
988,604.35 2,268.65 J-06 378,672.40 988,651.15 2,267.33 16.2 2,270.31 1.68
988,651.15 2,267.33 J-07 378,662.30 988,719.39 2,268.32 26.16 2,270.00 1.68
988,719.39 2,268.32 J-08 378,650.57 988,745.38 2,271.63 12.19 2,269.57 1.68
988,745.38 2,271.63 J-09 378,634.62 988,751.47 2,270.71 -21.99 2,269.38 1.68
988,751.47 2,270.71 J-10 378,600.62 988,770.15 2,271.82 -14.04 2,269.28 1.68
988,770.15 2,271.82 J-11 378,590.22 988,782.59 2,270.61 -27.31 2,269.03 1.68
988,782.59 2,270.61 J-12 378,580.81 988,802.05 2,270.48 -16.48 2,268.93 1.68
988,802.05 2,270.48 J-13 378,557.22 988,834.97 2,270.57 -16.54 2,268.79 1.68
988,834.97 2,270.57 J-14 378,544.08 988,849.04 2,271.30 -19.95 2,268.53 1.68
988,849.04 2,271.30 J-15 378,529.04 988,857.34 2,273.81 -28.29 2,268.41 1.68
988,857.34 2,273.81 J-16 378,466.12 988,860.27 2,273.77 -53.91 2,268.30 1.68
988,860.27 2,273.77 J-17 378,399.77 988,873.81 2,271.59 -57.44 2,267.90 1.68
988,873.81 2,271.59 J-18 378,356.94 988,895.55 2,268.79 -40.31 2,267.47 1.68
988,895.55 2,268.79 J-19 378,350.13 988,987.40 2,267.91 -15.9 2,267.16 1.68
988,987.40 2,267.91 J-20 378,314.07 989,010.75 2,267.50 -13.01 2,266.58 1.68
989,010.75 2,267.50 J-21 378,269.12 989,017.27 2,267.90 -11.67 2,266.31 1.68
989,017.27 2,267.90 J-22 378,253.28 989,023.46 2,267.20 -18.41 2,266.02 1.68
989,023.46 2,267.20 J-23 378,246.56 989,030.63 2,267.20 -12.62 2,265.91 1.68
989,030.63 2,267.20 J-24 378,236.25 989,062.77 2,266.12 -13.23 2,265.85 1.68
989,062.77 2,266.12 J-25 378,220.99 989,097.82 2,264.40 -4.76 2,265.63 1.68
989,097.82 2,264.40 RWT 378,218.66 989,128.00 2,264.80 9.71 2,265.39 1.68
Headloss GDownstream
Downstream
Discharge (l/s)
6.35 9.6 2,270.92 266.47
6.36 -8.12 2,270.81 266.47
6.35 -11.48 2,270.68 266.47
6.35 18.86 2,270.49 266.47
6.35 16.2 2,270.31 266.47
6.35 26.16 2,270.00 266.47
6.35 12.19 2,269.57 266.47
6.35 -21.99 2,269.38 266.47
6.35 -14.04 2,269.28 266.47
6.35 -27.31 2,269.03 266.47
6.36 -16.48 2,268.93 266.47
6.35 -16.54 2,268.79 266.47
6.35 -19.95 2,268.53 266.47
6.36 -28.29 2,268.41 266.47
6.35 -53.91 2,268.30 266.47
6.35 -57.44 2,267.90 266.47
6.35 -40.31 2,267.47 266.47
6.35 -15.9 2,267.16 266.47
6.35 -13.01 2,266.58 266.47
6.35 -11.67 2,266.31 266.47
6.35 -18.41 2,266.02 266.47
6.35 -12.62 2,265.91 266.47
6.35 -13.23 2,265.85 266.47
6.35 -4.76 2,265.63 266.47
6.35 9.71 2,265.39 266.47
6.35 11.74 2,265.20 266.47