Steel

 Shelving  and  Lockers 3.2  Shelving  Fittings

3.02.00 STEEL SHELVING & LOCKERS

CODE TYPE DESCRIPTION/SPECIFICATION LOCATION REVISION

Q1 STEEL ANGLE SHELVING Medium Duty Slotted angle steel shelving size 2134mm (height) x 305mm (deep) x 914mm (wide), with As in Plan
D305mm 5no. shelf levels per unit. Units assembled together with corner gussets and complete with standard
bracing, end-frame angle uprights and all necessary accessories in accordance to the manufacturer’s
specifications

Q2 STEEL ANGLE SHELVING Medium Duty Slotted angle steel shelving size 2134mm (height) x 381mm (deep) x 914mm (wide), with As in Plan
D381mm 5no. shelf levels per unit. Units assembled together with corner gussets and complete with standard
bracing, end-frame angle uprights and all necessary accessories in accordance to the manufacturer’s
specifications.

Q3 STEEL ANGLE SHELVING Medium Duty Slotted angle steel shelving size 2438mm (height) x 457mm (deep) x 914mm (wide), with As in Plan
D457mm 5no. shelf levels per unit. Units assembled together with corner gussets and complete with standard
bracing, end-frame angle uprights and all necessary accessories in accordance to the manufacturer’s
specifications.

Q4 STEEL ANGLE SHELVING Medium Duty Slotted angle steel shelving size 2438mm (height) x 610mm (deep) x 914mm (wide), with As in Plan
D610mm 5no. shelf levels per unit. Units assembled together with corner gussets and complete with standard
bracing, end-frame angle uprights and all necessary accessories in accordance to the manufacturer’s
specifications.

Q5 LIGHT DUTY STEEL Light Duty steel Racking size 2438mm (height) x 610mm (deep) x 1830mm (wide), assembled from As in Plan
RACKING L1830mm 1830mm long ‘sigma’ beams, complete with a 22mm thick Pine closed timber deck (size 1830 x 610mm).
Load capacity should not be less than 2300kg per frame.

Q6 LIGHT DUTY STEEL Light Duty steel Racking size 2438mm (height) x 610mm (deep) x 2438mm (wide), assembled from As in Plan
RACKING L2134mm 2438mm long ‘sigma’ beams, complete with a 22mm thick Pine closed timber deck (size 2438 x 610mm).
Load capacity should not be less than 2300kg per frame.

Q7 HEAVY DUTY STEEL Heavy Duty steel Racking size 2438mm (height) x 610mm (deep) x 2438mm (wide), assembled from As in Plan
RACKING L2438mm 2438mm long ‘sigma’ beams, complete with a 22mm thick Pine closed timber deck (size 2438 x 610mm).
Load capacity should not be less than 5000kg per frame.

Proposed  FET  Colleges

Steel  Shelving  and  Lockers 3.2  Shelving  Fittings

Q8 MELAMINEFACED MDF 450mm deep 16mm thick Melamine-faced Medium Density Fibre board (MDF) 4-tier shelving As in Plan
SHELVING D450mm wallmounted on steel gondola brackets and wall bands, comprising of:
* Shelf boards comprising of plain “Supawood” MDF faced with melamine impregnated paper, in
architect approved finish. Vertical spacing for each tier 450mm.
* Medium steel wall band double slotted 1825mm in ‘Ivory Epoxy’ finish, at 900mm spacing.
* Wall gondola brackets 450mm (as applicable), in ‘Ivory Epoxy’ finish.

Q9 PAINTED MDF SHELVING 300mm deep 16mm thick Medium Density Fibre board (MDF) 4-tier shelving 450mm spacing, As in Plan
D300mm wallmounted on size 203mm x 254mm x 0.9mm steel brackets (without stays) in white epoxy finish, at
approx. 900mm centres as per layout drawing.
* Each steel brackets to be fixed to wall with 3 x no.8 CSK screws, and fixed to shelf with 3 x no.4 or
no.6 CSK Screws
* Plain MDF shelving boards to be square-edged and sealed on all surfaces with 2no. coats primer coat
and finished in 2no. coats of water-based enamel paint colour ‘White’, to approval.

Q10 SS2A PAINTED MDF 600mm deep 16mm thick Medium Density Fibre board (MDF) 4-tier shelving, wall-mounted on size As in Plan
SHELVING D600mm 305mm x 356mm x 1.0mm steel brackets (without stays) in white epoxy finish, as per section and layout
drawing.
*Each steel brackets to be fixed to wall with 3 x no.8 CSK screws, and fixed to shelf with 3 x no.6 CSK
Screws
* Plain MDF shelving boards to be square-edged and sealed on all surfaces with 2no. coats primer coat
and finished in 2no. coats water-based enamel paint colour ‘White’, to approval.

Q11 SLATTED MERANTI 450mm deep x 16mm thick Meranti slatted 4-tier shelving, wall-mounted on steel gallow brackets, as per As in Plan
SHELVING D450mm (4 section and layout drawing, with shelving finished in 2no. coats of clear ‘egg shell’ varnish and steel
person) brackets primed and painted in 2no. coats water-based enamel paint colour ‘White’, to approval.

Q12 STEEL LOCKER 1800Hx450Wx500D 4-Person steel lockers, epoxy polyester baked enamel finish complete with all As in Plan
necessary accessories. Each locker to have 4 doors and 4 openings, with no hanging rails 2 louvre vents
on the doors, Drop Hinge , Hasp and Staple Lock and all necessary accessories in accordance to the
manufacturer’s specifications.

Q13 STEEL LOCKER 1800Hx450Wx500D single door steel lockers, epoxy polyester baked enamel finish complete with all As in Plan
(1 Door) necessary accessories. Each Locker to have 2 doors and 1 shelf at the top, with a hanging rail underneath
and all necessary accessories in accordance to the manufacturer’s specifications.

Q14 STEEL LOCKER (Workers) 1800Hx450Wx600D Horizontal non-lockable, swivel hatch with boot compartment, double door steel As in Plan
lockers, epoxy polyester baked enamel finish complete with all necessary accessories in accordance to the
manufacturer’s specifications.

Proposed  FET  Colleges

Steel  Shelving  and  Lockers 3.2  Shelving  Fittings

Q15 STEEL LOCKER (cleaning Ventilated, double door steel locker, epoxy polyester baked enamel finish complete with all necessary As in Plan
equip) accessories with all necessary accessories in accordance to the manufacturer’s specifications.

Q16 WALL & FLOOR MOUNTED 1800Hx450Wx500D single door heavy-duty steel lockers, epoxy polyester baked enamel with all As in Plan
HEAVY DUTY STEEL necessary accessories in accordance to the manufacturer’s specifications. Each Locker to have 2 doors and
LOCKER 1 shelf at the top, with a hanging rail underneath. Locker to be Wall mounted using suitable anchor bolts
and plastered over.

Note;
* All products to meet the latest relevant SABS standards.

Proposed  FET  Colleges